Search Results

Search found 16748 results on 670 pages for 'port block'.

Page 204/670 | < Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >

  • Public IP Routing over Private GRE tunnel

    - by Paul
    I have a GRE tunnel configured between two linux boxes. The tunnel works fine. I can ping from each host the other private ip. Head privateip: 10.0.0.1 publicip: 8.8.8.8 Tail privateip: 10.0.0.2 publicip: 7.7.7.7 The public IP on Tail has the network block 9.9.9.0/23 statically routed over the 7.7.7.7 interface. The idea is to make the 9.9.9.0/23 ips work on servers on the 8.8.8.8 network. I configure the tail host to route the /23 block. I mounted a 9.9 IP on the head server. I can ping the 9.9 ip from the tail to the head. I can't ping the 9.9 ip from the public internet. I think I need to add some other routes because of gateway issues, but I can't seem to wrap my mind around it (not a router guy, just beating my way through something that I have never done before and vaguely understand) --danks

    Read the article

  • Importing GPG Key

    - by Bodo
    I have problems importing my GPG-Keys into my new installation of debian. I exportet the private-key a few years ago. Now I am trying to get everything running under a new debian. I tried to do gpg --allow-secret-key-import --import private-key.asc But I only get this: gpg: Keine gültigen OpenPGP-Daten gefunden. gpg: Anzahl insgesamt bearbeiteter Schlüssel: 0 which translates to: gpg: No valid OpenPGP-Data found gpg: Number of processed Keys : 0 The file looks correct and starts with --BEGIN PGP PRIVATE KEY BLOCK----- Version: GnuPG v1.4.9 (GNU/Linux) and ends with -----END PGP PRIVATE KEY BLOCK----- what could be wrong?

    Read the article

  • Elasticsearch won't start anymore

    - by Oleander
    I restarted my elasticsearch instance 5 days ago and I haven't manage to start it since then. I get no output in the log file /var/log/elasticsearch/ nor does the elasticsearch binary print any information when running at using elasticsearch -f. I once manage to get this output. [2012-11-15 22:51:18,427][INFO ][node ] [Piper] {0.19.11}[29584]: initializing ... [2012-11-15 22:51:18,433][INFO ][plugins ] [Piper] loaded [], sites [] Running curl http://localhost:9200 resulted in curl: (7) couldn't connect to host. I've tried increasing the memory from 3gb to 10gb, but that didn't make any diffrence. Running /etc/init.d/elasticsearch start takes 30 seconds. ps aux | grep elasticsearch results in this output. /usr/local/share/elasticsearch/bin/service/exec/elasticsearch-linux-x86-64 /usr/local/share/elasticsearch/bin/service/elasticsearch.conf wrapper.syslog.ident=elasticsearch wrapper.pidfile=/usr/local/share/elasticsearch/bin/service/./elasticsearch.pid wrapper.name=elasticsearch wrapper.displayname=ElasticSearch wrapper.daemonize=TRUE wrapper.statusfile=/usr/local/share/elasticsearch/bin/service/./elasticsearch.status wrapper.java.statusfile=/usr/local/share/elasticsearch/bin/service/./elasticsearch.java.status wrapper.script.version=3.5.14 /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/java -Delasticsearch-service -Des.path.home=/usr/local/share/elasticsearch -Xss256k -XX:+UseParNewGC -XX:+UseConcMarkSweepGC -XX:CMSInitiatingOccupancyFraction=75 -XX:+UseCMSInitiatingOccupancyOnly -XX:+HeapDumpOnOutOfMemoryError -Djava.awt.headless=true -Xms1024m -Xmx1024m -Djava.library.path=/usr/local/share/elasticsearch/bin/service/lib -classpath /usr/local/share/elasticsearch/bin/service/lib/wrapper.jar:/usr/local/share/elasticsearch/lib/elasticsearch-0.19.11.jar:/usr/local/share/elasticsearch/lib/elasticsearch-0.19.11.jar:/usr/local/share/elasticsearch/lib/jna-3.3.0.jar:/usr/local/share/elasticsearch/lib/log4j-1.2.17.jar:/usr/local/share/elasticsearch/lib/lucene-analyzers-3.6.1.jar:/usr/local/share/elasticsearch/lib/lucene-core-3.6.1.jar:/usr/local/share/elasticsearch/lib/lucene-highlighter-3.6.1.jar:/usr/local/share/elasticsearch/lib/lucene-memory-3.6.1.jar:/usr/local/share/elasticsearch/lib/lucene-queries-3.6.1.jar:/usr/local/share/elasticsearch/lib/snappy-java-1.0.4.1.jar:/usr/local/share/elasticsearch/lib/sigar/sigar-1.6.4.jar -Dwrapper.key=k7r81VpK3_Bb3N_5 -Dwrapper.port=32000 -Dwrapper.jvm.port.min=31000 -Dwrapper.jvm.port.max=31999 -Dwrapper.disable_console_input=TRUE -Dwrapper.pid=23888 -Dwrapper.version=3.5.14 -Dwrapper.native_library=wrapper -Dwrapper.service=TRUE -Dwrapper.cpu.timeout=10 -Dwrapper.jvmid=1 org.tanukisoftware.wrapper.WrapperSimpleApp org.elasticsearch.bootstrap.ElasticSearchF My current system: ElasticSearch Version: 0.19.11, JVM: 23.2-b09 Ubuntu 12.04 LTS I've tried re-install elasticsearch, removing old directories. Why can't I get it to start?

    Read the article

  • PowerConnect 2848 , vlan configuration with AP

    - by Francesco
    I need to configure two vlan on an AP connected with a Dell PowerConnect 2848. The first one is up and running (let's say vlan x) , the second one is a completely different network (vlan y) , provided by a Gateway-DHCP wich i have no access, directely Patched (via patch panel) at a secondo AP device. So i cannot just plug this Gateway device on my switch without tagging traffic before, for DHCP collion . I have to solve this problem. I was thinking about tagging the traffic at the port wich I will connect the gateway device with vlan y and then set as trunk (vlanx+y) the AP port. In this way I hope to limit the vlan y traffic ONLY for the ports I selected avoiding the spread of unwanted dhcp calls. But all other ports are Unassigned , so I am not sure they won't forward dhcp (vlan y) traffic. I cannot change the Unassigned state for the vlan x ports cause vlanx is native.

    Read the article

  • Fighting Spam - What can I do as an: Email Administrator, Domain Owner, or User?

    - by Chris S
    This is a Canonical Question about Fighting Spam. Also related: How to stop people from using my domain to send spam? There are so many techniques and so much to know about fighting SPAM. What widely used techniques and technologies are available to Administrator, Domain Owners, and End Users to help keep the junk out of our inboxes? We're looking for an answer that covers different tech from various angles. The accepted answer should include a variety of technologies (eg SPF/SenderID, DomainKeys/DKIM, Graylisting, DNS RBLs, Reputation Services, Filtering Software [SpamAssassin, etc]); best practices (eg mail on Port 25 should never be allowed to relay, Port 587 should be used; etc), terminology (eg, Open Relay, Backscatter, MSA/MTA/MUA, Spam/Ham), and possibly other techniques.

    Read the article

  • How do I configure multiple domain names on my IIS server?

    - by Dillie-O
    We have a few websites that we are running on one instance of IIS that need to be mapped for each of their domain names. For example. Site A has the domain name coolness.com Site B has the domain name 6to8Weeks.com Site C has the domain name PhatTech.com When I look at the "Web Site Identification" section of the IIS configuration window, I notice that I can specify an IP address and port, but if I click the Advanced button, I can also configure the site based on host header values as well. How do I configure each site in IIS? Ideally I would like them to all be able to listen to port 80, so I don't have weird URLs, but I'm not sure if I do this using headers, IP addresses, both, or something else.

    Read the article

  • Can't SSH into a Vagrant Virtual Machine

    - by Christopher Ickes
    Local Vagrant machine installed at ip address 10.0.0.23 and hostname lamp-vm. Using vagrant ssh I can connect just fine and do everything I need. This creates an ERROR - ssh vagrant@lamp-vm -v -v and I get debug1: connect to address 10.0.0.23 port 22: Connection timed out ssh: connect to host lamp-vm port 22: Connection timed out My etc/hosts file contains 10.0.0.23 lamp-vm. My .ssh/config file looks like Host lamp-vm User vagrant IdentityFile ~/.ssh/vagrant I have tried the ssh command with and without the -i /path/to/.sh/identity_file as well. How do I connect to my Vagrant Virtual Machine using SSH?

    Read the article

  • Fix bad blocks on Mac hard disk

    - by Andrew Vit
    I have a hard disk that I scanned with TechTool and it reports one bad block. As far as I can tell, TechTool only scans and reports a failure. It doesn't fix anything. Back in the day, Norton Disk Doctor did the job of scanning and flagging (remapping) bad blocks on the Mac. Today we have various tools for fixing up HFS+ directory errors (Disk Utility, fsck, DiskWarrior, TechTool), but I don't know of any tool that will do a surface scan and fix the bad blocks too. What software is available for this? If I know the address of the bad block, is there a low-level terminal utility for marking it?

    Read the article

  • ICMP - TTL - Trace Route

    - by dbasnett
    I asked this question at Stack Overflow and then thought this may be the better place to ask. Given the following situation: PC --- |aa RTR1 bb| --- |aa RTR2 bb| --- |aa RTR3 bb| etc Each of the |aa rtr bb| is meant to be a router with two ports aa and bb. My question is this. When you do a trace route from PC which router port address should respond with time to live exceeded in transit message? I seem to remember being taught to think of the router as being in as many parts as ports, so that in my scenario when aa is forwarding the packet to bb and decrements the ttl to 0, it will be the address of the aa port in the failure message. I am trying to find the definitive answer. Thanks.

    Read the article

  • How to prevent yourself from commenting on websites?

    - by MHH
    There is a bunch of browser add ons to either block particular websites (i.e. leechblock, chrome nanny or various OS specific solutions) or block the comment section of a website (i.e. commentBlocker). However, what if you want to be able to read the comment section of all websites, but want to never be able to add comments yourself, on particular sites? Is there anything that will allow this? I'm particularly interested in answers that will work for both windows and mac, and will also work for google chrome, firefox, and safari (note they can be different solutions for each browser/operating system)

    Read the article

  • not find 127.0.0.1 or vhost with localhost apache in mac

    - by Charly Palencia
    i was working with localhost:81 during a long time with vhost and all was rigth. BUT, right now i need to work over the 80 port and i change the http.conf and http-vhost for used the 80 port but right now into the browser localhost works ok, 127.0.0.1 and the vhost not find the server. my configurations are: * My local machine is lion osx * mamp * HTTP.conf: ServerName localhost:80 * http-vhost NameVirtualHost localhost <VirtualHost localhost> DocumentRoot "/Users/chalien/projects/ownProjects/PHP" ServerName example.dev </VirtualHost> * /private/etc/hosts 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost 127.0.0.1 example.dev * /private/etc/services http 80/udp www www-http # World Wide Web HTTP http 80/tcp www www-http # World Wide Web HTTP

    Read the article

  • Bring internet connection to ssh target machine via tunnel?

    - by Calvin
    I have a CentOS 5 machine deep inside firewalls that's only reachable via ssh on an unconventional port, let's say 98765. I normally connect to this machine like this: ssh -P 98765 user@ip -L5900:localhost:5900 I need to run yum to install some packages on this machine, but it's not possible since the outbound ports are all closed on this machine. I want to do something like this to "bring my internet connection" to this machine: ssh -P 98765 user@ip -L5900:localhost:5900 -R80:localhost:80 -R21:localhost:21 My intention is that, when I run yum on the machine, yum will use port 80 and 21 through my originating machine. Is something like this even possible?

    Read the article

  • Why do Ping and Dig provide different IP address than nslookup?

    - by user1032531
    When pinging my domain name which points to my home public IP from two different servers on my LAN, it shows them pinging different IP. Further investigation shows dig and nslookup providing different results. See below. A little history. My IP used to be 11.22.33.444 and is hosted by Comcast. I changed routers, and it somehow got changed to 55.66.77.888. I've since updated my 1and1 domain name to point to the 55.66.77.888. desktop is a basic server, runs the web server, and connects wirelessly to my LAN. laptop is a GUI and connected via CAT5. Both operate Centos6.4. My old router was a D-Link, and used their "Virtual Server" feature to pass port 80 to desktop. My new router is a Linksys, and I use their "Port Forwarding" feature to pass port 80 to desktop (however, I haven't gotten this part working yet). What is going on??? Why the different IPs? Obviously, it most somehow be stored on the server, but why does the actual machine even know the public IP since it is on a LAN? How do I purge the old IP? [root@desktop etc]# dig +short myDomain.com 11.22.33.444 [root@desktop etc]# nslookup www.myDomain.com Server: 8.8.8.8 Address: 8.8.8.8#53 Non-authoritative answer: Name: www.myDomain.com Address: 55.66.77.888 [root@desktop etc]# dig myDomain.com ; <<>> DiG 9.8.2rc1-RedHat-9.8.2-0.17.rc1.el6_4.6 <<>> myDomain.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 13822 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;myDomain.com. IN A ;; ANSWER SECTION: myDomain.com. 16031 IN A 11.22.33.444 ;; Query time: 21 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Mon Oct 21 04:36:52 2013 ;; MSG SIZE rcvd: 44 [root@desktop etc]# [root@laptop ~]# dig +short myDomain.com 55.66.77.888 [root@laptop ~]# nslookup www.myDomain.com Server: 192.168.0.1 Address: 192.168.0.1#53 Non-authoritative answer: Name: www.myDomain.com Address: 55.66.77.888 [root@laptop ~]#

    Read the article

  • Is it possible to run two servers in one system ?

    - by srikanth
    hi, i have a small problem while trying to execute the wamp server. At present in my system i am running Apache server. i have a php application. for that i am trying to install wamp server in my system. wamp server is not running. i change the port no of wamp server as : in my C:\wamp\bin\apache\Apache2.2.11\conf\ i have httpd.conf file. in that i change listener and host name with another port no. then also it is not working. any one can you help me......... plz...

    Read the article

  • Can't connect to STunnel when it's running as a service

    - by John Francis
    I've got STunnel configured to proxy non SSL POP3 requests to GMail on port 111. This is working fine when STunnel is running as a desktop app, but when I run the STunnel service, I can't connect to port 111 on the machine (using Outlook Express for example). The Stunnel log file shows the port binding is succeeding, but it never sees a connection. There's something preventing the connection to that port when STunnel is running as a service? Here's stunnel.conf cert = stunnel.pem ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Some debugging stuff useful for troubleshooting debug = 7 output = stunnel.log ; Use it for client mode client = yes ; Service-level configuration [gmail] accept = 127.0.0.1:111 connect = pop.gmail.com:995 stunnel.log from service 2010.10.07 12:14:22 LOG5[80444:72984]: Reading configuration from file stunnel.conf 2010.10.07 12:14:22 LOG7[80444:72984]: Snagged 64 random bytes from C:/.rnd 2010.10.07 12:14:23 LOG7[80444:72984]: Wrote 1024 new random bytes to C:/.rnd 2010.10.07 12:14:23 LOG7[80444:72984]: PRNG seeded successfully 2010.10.07 12:14:23 LOG7[80444:72984]: Certificate: stunnel.pem 2010.10.07 12:14:23 LOG7[80444:72984]: Certificate loaded 2010.10.07 12:14:23 LOG7[80444:72984]: Key file: stunnel.pem 2010.10.07 12:14:23 LOG7[80444:72984]: Private key loaded 2010.10.07 12:14:23 LOG7[80444:72984]: SSL context initialized for service gmail 2010.10.07 12:14:23 LOG5[80444:72984]: Configuration successful 2010.10.07 12:14:23 LOG5[80444:72984]: No limit detected for the number of clients 2010.10.07 12:14:23 LOG7[80444:72984]: FD=156 in non-blocking mode 2010.10.07 12:14:23 LOG7[80444:72984]: Option SO_REUSEADDR set on accept socket 2010.10.07 12:14:23 LOG7[80444:72984]: Service gmail bound to 0.0.0.0:111 2010.10.07 12:14:23 LOG7[80444:72984]: Service gmail opened FD=156 2010.10.07 12:14:23 LOG5[80444:72984]: stunnel 4.34 on x86-pc-mingw32-gnu with OpenSSL 1.0.0a 1 Jun 2010 2010.10.07 12:14:23 LOG5[80444:72984]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 stunnel.log from desktop (working) process 2010.10.07 12:10:31 LOG5[80824:81200]: Reading configuration from file stunnel.conf 2010.10.07 12:10:31 LOG7[80824:81200]: Snagged 64 random bytes from C:/.rnd 2010.10.07 12:10:32 LOG7[80824:81200]: Wrote 1024 new random bytes to C:/.rnd 2010.10.07 12:10:32 LOG7[80824:81200]: PRNG seeded successfully 2010.10.07 12:10:32 LOG7[80824:81200]: Certificate: stunnel.pem 2010.10.07 12:10:32 LOG7[80824:81200]: Certificate loaded 2010.10.07 12:10:32 LOG7[80824:81200]: Key file: stunnel.pem 2010.10.07 12:10:32 LOG7[80824:81200]: Private key loaded 2010.10.07 12:10:32 LOG7[80824:81200]: SSL context initialized for service gmail 2010.10.07 12:10:32 LOG5[80824:81200]: Configuration successful 2010.10.07 12:10:32 LOG5[80824:81200]: No limit detected for the number of clients 2010.10.07 12:10:32 LOG7[80824:81200]: FD=156 in non-blocking mode 2010.10.07 12:10:32 LOG7[80824:81200]: Option SO_REUSEADDR set on accept socket 2010.10.07 12:10:32 LOG7[80824:81200]: Service gmail bound to 0.0.0.0:111 2010.10.07 12:10:32 LOG7[80824:81200]: Service gmail opened FD=156 2010.10.07 12:10:33 LOG5[80824:81200]: stunnel 4.34 on x86-pc-mingw32-gnu with OpenSSL 1.0.0a 1 Jun 2010 2010.10.07 12:10:33 LOG5[80824:81200]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.10.07 12:10:33 LOG7[80824:81844]: Service gmail accepted FD=188 from 127.0.0.1:24813 2010.10.07 12:10:33 LOG7[80824:81844]: Creating a new thread 2010.10.07 12:10:33 LOG7[80824:81844]: New thread created 2010.10.07 12:10:33 LOG7[80824:25144]: Service gmail started 2010.10.07 12:10:33 LOG7[80824:25144]: FD=188 in non-blocking mode 2010.10.07 12:10:33 LOG7[80824:25144]: Option TCP_NODELAY set on local socket 2010.10.07 12:10:33 LOG5[80824:25144]: Service gmail accepted connection from 127.0.0.1:24813 2010.10.07 12:10:33 LOG7[80824:25144]: FD=212 in non-blocking mode 2010.10.07 12:10:33 LOG6[80824:25144]: connect_blocking: connecting 209.85.227.109:995 2010.10.07 12:10:33 LOG7[80824:25144]: connect_blocking: s_poll_wait 209.85.227.109:995: waiting 10 seconds 2010.10.07 12:10:33 LOG5[80824:25144]: connect_blocking: connected 209.85.227.109:995 2010.10.07 12:10:33 LOG5[80824:25144]: Service gmail connected remote server from 192.168.1.9:24814 2010.10.07 12:10:33 LOG7[80824:25144]: Remote FD=212 initialized 2010.10.07 12:10:33 LOG7[80824:25144]: Option TCP_NODELAY set on remote socket 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): before/connect initialization 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 write client hello A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 read server hello A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 read server certificate A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 read server done A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 write client key exchange A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 write change cipher spec A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 write finished A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 flush data 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 read finished A 2010.10.07 12:10:33 LOG7[80824:25144]: 1 items in the session cache 2010.10.07 12:10:33 LOG7[80824:25144]: 1 client connects (SSL_connect()) 2010.10.07 12:10:33 LOG7[80824:25144]: 1 client connects that finished 2010.10.07 12:10:33 LOG7[80824:25144]: 0 client renegotiations requested 2010.10.07 12:10:33 LOG7[80824:25144]: 0 server connects (SSL_accept()) 2010.10.07 12:10:33 LOG7[80824:25144]: 0 server connects that finished 2010.10.07 12:10:33 LOG7[80824:25144]: 0 server renegotiations requested 2010.10.07 12:10:33 LOG7[80824:25144]: 0 session cache hits 2010.10.07 12:10:33 LOG7[80824:25144]: 0 external session cache hits 2010.10.07 12:10:33 LOG7[80824:25144]: 0 session cache misses 2010.10.07 12:10:33 LOG7[80824:25144]: 0 session cache timeouts 2010.10.07 12:10:33 LOG6[80824:25144]: SSL connected: new session negotiated 2010.10.07 12:10:33 LOG6[80824:25144]: Negotiated ciphers: RC4-MD5 SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=MD5 2010.10.07 12:10:34 LOG7[80824:25144]: SSL socket closed on SSL_read 2010.10.07 12:10:34 LOG7[80824:25144]: Sending socket write shutdown 2010.10.07 12:10:34 LOG5[80824:25144]: Connection closed: 53 bytes sent to SSL, 118 bytes sent to socket 2010.10.07 12:10:34 LOG7[80824:25144]: Service gmail finished (0 left)

    Read the article

  • Where are ethernet errors logged?

    - by Matt
    Munin is showing me a graph like this: During that spike, I was unable to access my server through the eth0 port (I could access it through my IPMI port). I'm trying to figure out what happened, but I can't seem to locate any log files for eth0. I don't see anything in /var/log/(kern|syslog|messages) that is out of the ordinary. And I don't see a log file specifically for eth0. Are there logs for eth0, and if so, where can I find them? I am running Ubuntu 10.04 LTS.

    Read the article

  • Windows 8 Pro Remote Desktop issue

    - by Mike C.
    I have a weird issue here. I'm running Windows 8 Pro. The client computer is also running Windows 8 Pro. Remote Desktop works when I'm in the same network. I tried connecting using my external IP Address and my DynDNS account, neither works. I disabled Windows Firewall and setup DMZ for my computer on the router, still can't get remote desktop to work. I verified www.canyouseeme.org, port 3389 is open, which is obvious since I'm running DMZ! My ISP, Bell Canada (modem/router: Sagemcom F@st 2864), blocks port 80 and 25, but I don't need those for RDP, do I? The funny thing is RDP rejects the connection instantaneously for my IP or DynDNS while it takes a while for another address. Thank you, Michael

    Read the article

  • external HDD with SATA & USB interface? [closed]

    - by GregH
    Anyone know of an external HDD that would have (in addition to USB) a SATA (eSATA) port/cable? i.e. Brand/Model Background - In one location I want to use it is I would like to increase the performance by cabling it directly to the PC SATA port, HOWEVER I don't want to have to open up the PC to do this each time. I was thinking of running a SATA cable out through the PC case so I just plug it directly into the external HDD in question. Perhaps it should be also externally powered too so I don't need to run a power cable out from the PC power supply.

    Read the article

  • Remote call script as administrator

    - by drupality
    I created a Windows XP bat script to modify etc/hosts file. I want to share this script at other machine, then from another computer I want to invoke these script to modify hosts file at first computer (via LAN). I need some example. I didn't find any example. Is this possible? I try: runas/user:username block.bat On the same machine login as guest but it doesn't work. No errors just "Attempting to call block.bat" and end of invocation. As admin script works ok. Could someone give me any advice?

    Read the article

  • How to configure fastcgi to work with ligttpd in ubuntu

    - by michael
    I am able to run lighttpd on ubuntu 9.10. But when i tried to setup fastcgi with lighttpd by putting this in the ligttpd.conf file: #### fastcgi module fastcgi.server = ( "/fastcgi_scripts/" => (( "host" => "127.0.0.1", "port" => "9098", "check-local" => "disable", "bin-path" => "/usr/local/bin/cgi-fcgi", "docroot" => "/" # remote server may use # it's own docroot )) ) This is what I get in the error.log in ligttpd: 2010-03-07 21:00:11: (log.c.166) server started 2010-03-07 21:00:11: (mod_fastcgi.c.1104) the fastcgi-backend /usr/local/bin/cgi-fcgi failed to start: 2010-03-07 21:00:11: (mod_fastcgi.c.1108) child exited with status 1 /usr/local/bin/cgi-fcgi 2010-03-07 21:00:11: (mod_fastcgi.c.1111) If you're trying to run your app as a FastCGI backend, make sure you're using the FastCGI-enabled version. If this is PHP on Gentoo, add 'fastcgi' to the USE flags. 2010-03-07 21:00:11: (mod_fastcgi.c.1399) [ERROR]: spawning fcgi failed. 2010-03-07 21:00:11: (server.c.931) Configuration of plugins failed. Going down. I do have cgi-fcgi in /usr/local/bin: $ which cgi-fcgi /usr/local/bin/cgi-fcgi '/usr/local/bin/cgi-fcgi' is the executable after I download and compile fast-cgi. Here is my lighttpd conf file: $ more lighttpd.conf # lighttpd configuration file # # use it as a base for lighttpd 1.0.0 and above # # $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $ ############ Options you really have to take care of #################### ## modules to load # at least mod_access and mod_accesslog should be loaded # all other module should only be loaded if really neccesary # - saves some time # - saves memory server.modules = ( # "mod_rewrite", # "mod_redirect", # "mod_alias", "mod_access", # "mod_trigger_b4_dl", # "mod_auth", # "mod_status", # "mod_setenv", "mod_fastcgi", # "mod_proxy", # "mod_simple_vhost", # "mod_evhost", # "mod_userdir", # "mod_cgi", # "mod_compress", # "mod_ssi", # "mod_usertrack", # "mod_expire", # "mod_secdownload", # "mod_rrdtool", "mod_accesslog" ) ## A static document-root. For virtual hosting take a look at the ## mod_simple_vhost module. server.document-root = "/srv/www/htdocs/" ## where to send error-messages to server.errorlog = "/var/log/lighttpd/error.log" # files to check for if .../ is requested index-file.names = ( "index.php", "index.html", "index.htm", "default.htm" ) ## set the event-handler (read the performance section in the manual) # server.event-handler = "freebsd-kqueue" # needed on OS X # mimetype mapping mimetype.assign = ( ".pdf" => "application/pdf", ".sig" => "application/pgp-signature", ".spl" => "application/futuresplash", ".class" => "application/octet-stream", ".ps" => "application/postscript", ".torrent" => "application/x-bittorrent", ".dvi" => "application/x-dvi", ".gz" => "application/x-gzip", ".pac" => "application/x-ns-proxy-autoconfig", ".swf" => "application/x-shockwave-flash", ".tar.gz" => "application/x-tgz", ".tgz" => "application/x-tgz", ".tar" => "application/x-tar", ".zip" => "application/zip", ".mp3" => "audio/mpeg", ".m3u" => "audio/x-mpegurl", ".wma" => "audio/x-ms-wma", ".wax" => "audio/x-ms-wax", ".ogg" => "application/ogg", ".wav" => "audio/x-wav", ".gif" => "image/gif", ".jar" => "application/x-java-archive", ".jpg" => "image/jpeg", ".jpeg" => "image/jpeg", ".png" => "image/png", ".xbm" => "image/x-xbitmap", ".xpm" => "image/x-xpixmap", ".xwd" => "image/x-xwindowdump", ".css" => "text/css", ".html" => "text/html", ".htm" => "text/html", ".js" => "text/javascript", ".asc" => "text/plain", ".c" => "text/plain", ".cpp" => "text/plain", ".log" => "text/plain", ".conf" => "text/plain", ".text" => "text/plain", ".txt" => "text/plain", ".dtd" => "text/xml", ".xml" => "text/xml", ".mpeg" => "video/mpeg", ".mpg" => "video/mpeg", ".mov" => "video/quicktime", ".qt" => "video/quicktime", ".avi" => "video/x-msvideo", ".asf" => "video/x-ms-asf", ".asx" => "video/x-ms-asf", ".wmv" => "video/x-ms-wmv", ".bz2" => "application/x-bzip", ".tbz" => "application/x-bzip-compressed-tar", ".tar.bz2" => "application/x-bzip-compressed-tar", # default mime type "" => "application/octet-stream", ) # Use the "Content-Type" extended attribute to obtain mime type if possible #mimetype.use-xattr = "enable" ## send a different Server: header ## be nice and keep it at lighttpd # server.tag = "lighttpd" #### accesslog module accesslog.filename = "/var/log/lighttpd/access.log" ## deny access the file-extensions # # ~ is for backupfiles from vi, emacs, joe, ... # .inc is often used for code includes which should in general not be part # of the document-root url.access-deny = ( "~", ".inc" ) $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" } ## # which extensions should not be handle via static-file transfer # # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) ######### Options that are good to be but not neccesary to be changed ####### ## bind to port (default: 80) server.port = 9090 ## bind to localhost (default: all interfaces) server.bind = "127.0.0.1" ## error-handler for status 404 #server.error-handler-404 = "/error-handler.html" #server.error-handler-404 = "/error-handler.php" ## to help the rc.scripts #server.pid-file = "/var/run/lighttpd.pid" ###### virtual hosts ## ## If you want name-based virtual hosting add the next three settings and load ## mod_simple_vhost ## ## document-root = ## virtual-server-root + virtual-server-default-host + virtual-server-docroot ## or ## virtual-server-root + http-host + virtual-server-docroot ## #simple-vhost.server-root = "/srv/www/vhosts/" #simple-vhost.default-host = "www.example.org" #simple-vhost.document-root = "/htdocs/" ## ## Format: <errorfile-prefix><status-code>.html ## -> ..../status-404.html for 'File not found' #server.errorfile-prefix = "/usr/share/lighttpd/errors/status-" #server.errorfile-prefix = "/srv/www/errors/status-" ## virtual directory listings #dir-listing.activate = "enable" ## select encoding for directory listings #dir-listing.encoding = "utf-8" ## enable debugging #debug.log-request-header = "enable" #debug.log-response-header = "enable" #debug.log-request-handling = "enable" #debug.log-file-not-found = "enable" ### only root can use these options # # chroot() to directory (default: no chroot() ) #server.chroot = "/" ## change uid to <uid> (default: don't care) #server.username = "wwwrun" ## change uid to <uid> (default: don't care) #server.groupname = "wwwrun" #### compress module #compress.cache-dir = "/var/cache/lighttpd/compress/" #compress.filetype = ("text/plain", "text/html") #### proxy module ## read proxy.txt for more info #proxy.server = ( ".php" => # ( "localhost" => # ( # "host" => "192.168.0.101", # "port" => 80 # ) # ) # ) #### fastcgi module fastcgi.server = ( "/fastcgi_scripts/" => (( "host" => "127.0.0.1", "port" => 1026, "check-local" => "disable", "bin-path" => "/usr/local/bin/cgi-fcgi", #"docroot" => "/" # remote server may use # it's own docroot )) ) ## read fastcgi.txt for more info ## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini #fastcgi.server = ( ".php" => # ( "localhost" => # ( # "socket" => "/var/run/lighttpd/php-fastcgi.s ocket", # "bin-path" => "/usr/local/bin/php-cgi" # ) # ) # ) #### CGI module #cgi.assign = ( ".pl" => "/usr/bin/perl", # ".cgi" => "/usr/bin/perl" ) # #### SSL engine #ssl.engine = "enable" #ssl.pemfile = "/etc/ssl/private/lighttpd.pem" #### status module #status.status-url = "/server-status" #status.config-url = "/server-config" #### auth module ## read authentication.txt for more info #auth.backend = "plain" #auth.backend.plain.userfile = "lighttpd.user" #auth.backend.plain.groupfile = "lighttpd.group" #auth.backend.ldap.hostname = "localhost" #auth.backend.ldap.base-dn = "dc=my-domain,dc=com" #auth.backend.ldap.filter = "(uid=$)" #auth.require = ( "/server-status" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "user=jan" # ), # "/server-config" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "valid-user" # ) # ) #### url handling modules (rewrite, redirect, access) #url.rewrite = ( "^/$" => "/server-status" ) #url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" ) #### both rewrite/redirect support back reference to regex conditional using %n #$HTTP["host"] =~ "^www\.(.*)" { # url.redirect = ( "^/(.*)" => "http://%1/$1" ) #} # # define a pattern for the host url finding # %% => % sign # %0 => domain name + tld # %1 => tld # %2 => domain name without tld # %3 => subdomain 1 name # %4 => subdomain 2 name # #evhost.path-pattern = "/srv/www/vhosts/%3/htdocs/" #### expire module #expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "ac cess plus 1 seconds 2 minutes") #### ssi #ssi.extension = ( ".shtml" ) #### rrdtool #rrdtool.binary = "/usr/bin/rrdtool" #rrdtool.db-name = "/var/lib/lighttpd/lighttpd.rrd" #### setenv #setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" ) #setenv.add-response-header = ( "X-Secret-Message" => "42" ) ## for mod_trigger_b4_dl # trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db" # trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" ) # trigger-before-download.trigger-url = "^/trigger/" # trigger-before-download.download-url = "^/download/" # trigger-before-download.deny-url = "http://127.0.0.1/index.html" # trigger-before-download.trigger-timeout = 10 #### variable usage: ## variable name without "." is auto prefixed by "var." and becomes "var.bar" #bar = 1 #var.mystring = "foo" ## integer add #bar += 1 ## string concat, with integer cast as string, result: "www.foo1.com" #server.name = "www." + mystring + var.bar + ".com" ## array merge #index-file.names = (foo + ".php") + index-file.names #index-file.names += (foo + ".php") #### include #include /etc/lighttpd/lighttpd-inc.conf ## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf" #include "lighttpd-inc.conf" #### include_shell #include_shell "echo var.a=1" ## the above is same as: #var.a=1 Thank you for your help.

    Read the article

  • Cant access a remote server due mistake by setting firewall rule

    - by LMIT
    I need help due a my silly mistake! So for long time i have a dedicate server hosted by register.it Usually i access remotly to this server (Windows 2008 server) by Terminal Server. Today i wanted to block one site that continually send request to my server. So i was adding a new rule in the firewall (the native firewall on windows 2008 server), as i did many time, but this time, probably i was sleeping with my brain i add a general rules that stop everything! So i cant access to the server anymore, as no any users can browse the sites, nothing is working because this rule block everything. I know that is a silly mistake, no need to tell me :) so please what i can do ? The only 1 thing that my provider let me is reboot the server by his control panel, but this not help me in any way because the firewall block me again. i have administrator username and password, so what i really can do ? there are some trick some tecnique, some expert guru that can help me in this very bad situation ? UPDATE i follow the Tony suggest and i did a NMAP to check if some ports are open but look like all closed: NMAP RESULT Starting Nmap 6.00 ( http://nmap.org ) at 2012-05-29 22:32 W. Europe Daylight Time NSE: Loaded 93 scripts for scanning. NSE: Script Pre-scanning. Initiating Parallel DNS resolution of 1 host. at 22:32 Completed Parallel DNS resolution of 1 host. at 22:33, 13.00s elapsed Initiating SYN Stealth Scan at 22:33 Scanning xxx.xxx.xxx.xxx [1000 ports] SYN Stealth Scan Timing: About 29.00% done; ETC: 22:34 (0:01:16 remaining) SYN Stealth Scan Timing: About 58.00% done; ETC: 22:34 (0:00:44 remaining) Completed SYN Stealth Scan at 22:34, 104.39s elapsed (1000 total ports) Initiating Service scan at 22:34 Initiating OS detection (try #1) against xxx.xxx.xxx.xxx Retrying OS detection (try #2) against xxx.xxx.xxx.xxx Initiating Traceroute at 22:34 Completed Traceroute at 22:35, 6.27s elapsed Initiating Parallel DNS resolution of 11 hosts. at 22:35 Completed Parallel DNS resolution of 11 hosts. at 22:35, 13.00s elapsed NSE: Script scanning xxx.xxx.xxx.xxx. Initiating NSE at 22:35 Completed NSE at 22:35, 0.00s elapsed Nmap scan report for xxx.xxx.xxx.xxx Host is up. All 1000 scanned ports on xxx.xxx.xxx.xxx are filtered Too many fingerprints match this host to give specific OS details TRACEROUTE (using proto 1/icmp) HOP RTT ADDRESS 1 ... ... ... 13 ... 30 NSE: Script Post-scanning. Read data files from: D:\Program Files\Nmap OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 145.08 seconds Raw packets sent: 2116 (96.576KB) | Rcvd: 61 (4.082KB) Question: The provider locally can access by username and password ?

    Read the article

  • Uninstall php and nginx or fix setup

    - by jreed121
    First off, I'm a huge linux noob - sorry... I'm trying to setup nginx with php-fpm on debian and I'm pretty sure that I've completely screwed it up. nginx seems to be running fine because I can it it from a web browser and it load the stock "Welcome to nginx!" page. I'm not so sure about php-fpm though. When I try something like # restart php-fpm I get: bash: restart: command not found First off php-fpm some how got installed as php5-fpm when I do root@server:/etc/init.d# ls, which seems to contradict every tutorial and help doc I've read (supposed to be 'php-fpm'). I can restart it with this: service php5-fpm restart And just enter the package name 'php5-fpm' I get this: root@server:~# php5-fpm [17-Nov-2012 23:15:36] NOTICE: PHP message: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525/suhosin.so' - /usr/lib/php5/20100525/suhosin.so: cannot open shared object file: No such file or directory in Unknown on line 0 [17-Nov-2012 23:15:36] ERROR: An another FPM instance seems to already listen on /var/run/php5-fpm.sock [17-Nov-2012 23:15:36] ERROR: FPM initialization failed The root for nginx is /usr/share/nginx/html, when I try to navigate to a .php file in there with my web browser, it tries to download the file instead of interpret it. I would like this folder to be in my user's home directory ie: /home/administrator/www or /home/nginx/www. I know in order to do this I need to modify nginx.conf, but I find that configuration file difficult to understand. I suppose the fact that my .php scripts aren't being handled is my bigger problem anyways. When I try to see what running on port 9000 (php-fpm default port) with lsof -i :9000 it returns nothing - I guess indicating that it isn't listening. then I head over to vim /etc/php5/fpm/php-fpm.conf and there is no where to designate a port number. So should I just uninstall everything and start from scratch? If so, how do I clean it all up? Any suggestions for a tutorial once I'm ready to try again? Should I attempt to troubleshoot this mess? If so where should I start? Sorry guys, I'm feeling pretty stupid and lost right now. I'm not sure what my next steps are in trying to resolve this issue are. I realize that this is a horrible question for this type of Q&A site, but I'd really appreciate any guidance.

    Read the article

  • Why does 1080p through a VGA cable fit my HDTV but is oversized when through an HDMI cable?

    - by GraemeF
    I have put together a new PC with a XFX GeForce GTX 260 graphics card and have it connected to my HDTV. First, I used an old VGA cable with a DVI to VGA adapter and plugged it in to my HDTV's VGA port. Running at 1920x1080 it fit the screen perfectly. Now, to avoid running another cable across the room, I have connected it with a DVI to HDMI cable to my TV's HDMI port, and the desktop at 1920x1080 is cropped by the edge of the screen. I have "fixed" the cropping by using NVIDIA's "Adjust desktop size and position" tool, which created a screen resolution of 1814x1022 to fit the screen, but this is no longer the TV's native resolution and confuses some software (e.g. WoW). Why does VGA work as expected, but HDMI is scaled up? Can it be avoided?

    Read the article

  • Issue with Netgear GS108T Managed Switch and Jumbo Frames

    - by Richie086
    I recently purchased a Netgear GS108T managed switch and I am trying to configure jumbo packets between my NAS (Thecus N4100Pro), PC and managed switch. I should mention the fact that I was able to use jumbo frames between my PC and NAS before I purchased the switch without issue. My Desktop has a wired gigabit NIC (Intel 82579V Gigabit) and has the ability to configure jumbo frames (see pic) that are either 9014 bytes or 4088 bytes. I choose 9014 bytes for the jumbo frame size My NAS supports jumbo frames as well, and is configured to use 9014 as the frame size. When I go into my Netgear managed switch and set the frame size to 9014 on the ports I am using for my PC and NAS. See image As soon as I hit apply in the web interface, I loose my connection to the SMB shares on my NAS and I can no longer connect to the web admin interface for my NAS. The really strange thing is I can ping my NAS via the ping command, but when I try to connect to the web interface on port 80 or port 443 the page never loads. I did a scan from my PC to my NAS using nmap and I can see the following ports open PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 111/tcp open rpcbind 139/tcp open netbios-ssn 443/tcp open https 445/tcp open microsoft-ds 631/tcp open ipp 2000/tcp open cisco-sccp 2049/tcp open nfs 3260/tcp open iscsi 49152/tcp open unknown MAC Address: 00:14:FD:15:00:44 (Thecus Technology) Read data files from: C:\Program Files (x86)\Nmap Nmap done: 1 IP address (1 host up) scanned in 211.97 seconds Raw packets sent: 1 (28B) | Rcvd: 1 (28B) Anyone have any idea what is going on here? Why is nmap able to detect the ports are open and listening for http, https and file sharing but I cant connect when all devices have jumbo packets enabled? Stranger still - I did a packet capture using wireshark while the nmap scan was running and filtered so I only saw converstations between my PC and my NAS. Here are the packet details from my scan Only 4 packets over 5k bytes? What is going on here? Do I not need to configure jumbo frame sizes on the switch? I have an internet connection from my pc to the switch to my router - I just cannot connect to my NAS. I just checked on my iPhone and I am able to open my NAS web admin interface without issue on my iPhone! WTF!!!!!! Let me know if you need more details..

    Read the article

  • Nginx user subdomains, should I proxy_pass?

    - by Kevin L.
    I am trying to setup user subdomains, serving content from specific folders: www.example.com/username served from username.example.com (just like github pages). I've looked at Nginx rewrites, but I don't want the browser to redirect--I want the domain to be username.example.com. Anyway, a comment on this question says that I cannot rewrite host, only proxy to it. I tried to setup a proxy_pass, but all of the documentation and examples show it being used to (obviously) proxy to a service on another host or port, but in my case I want to just proxy to another location on the same host and port. Is this the appropriate way to tackle this problem, and if so, what is the right Nginx config syntax?

    Read the article

< Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >