Search Results

Search found 6020 results on 241 pages for 'valid'.

Page 205/241 | < Previous Page | 201 202 203 204 205 206 207 208 209 210 211 212  | Next Page >

• Apache's AuthDigestDomain and Rails Distributed Asset Hosts

  - by Jared

  I've got a server I'm in the process of setting up and I'm running into an Apache configuration problem that I can not get around. I've got Apache 2.2 and Passenger serving a Rails app with distributed asset hosting. This is the feature of Rails that lets you serve your static assets from assets0.example.com, assets1, assets2, and so on. The site needs to be passworded until launch. I've set up HTTP authentication on the site using Apache's mod_auth_digest. In my configuration I'm attempting to use the AuthDigestDomain directive to allow access to each of the asset URLs. The problem is, it doesn't seem to be working. I get the initial prompt for the password when I load the page, but then the first time it loads an asset from one of the asset URLs, I get prompted a 2nd, 3rd, or 4th time. In some browsers, I get prompted for every single resource on the page. I'm hoping that this is only a problem of how I'm specifying my directives and not a limitation of authorization in Apache itself. See the edited auth section below: <Location /> AuthType Digest AuthName "Restricted Site" AuthUserFile /etc/httpd/passwd/passwords AuthGroupFile /dev/null AuthDigestDomain / http://assets0.example.com/ http://assets1.example.com/ http://assets2.example.com/ http://assets3.example.com/ require valid-user order deny,allow allow from all </Location>

  Read the article

• Which is the best license for Open Source project?

  - by coderex

  Hi friends, I am a web developer, and i don't have enough knowledge in software licenses. I wish to publish some of my works. and i need to apply a licenses for that. My software/product is free of cost. But I have some restrictions on the distribution/Modification. Its free of cost.(but donations are acceptable ;-)) Source Code is freely available; that you can use, customize or edit/remove(but don't deviate the basic nature of the software). You don't have any permission to change the product name. There are some lib or class are and which is put into a folder caller "myname", you don't have the permission to rename "myname". You can contribute any additions modifications to my project, to the original source repository. (The contributors name/email/site link will be listed on the credit file). Don't remove the original author's name from the license. Put the license file or license code any where is in the project file or folder. You can redistribute this code as free or commercial. :) What you this, all these kinda restrictions are valid or ... ? For this, which license i want to use.

  Read the article

• Error "initializer element is not constant" when trying to initialize variable with const

  - by tomlogic

  I get an error on line 6 (initialize my_foo to foo_init) of the following program and I'm not sure I understand why. typedef struct foo_t { int a, b, c; } foo_t; const foo_t foo_init = { 1, 2, 3 }; foo_t my_foo = foo_init; int main() { return 0; } Keep in mind this is a simplified version of a larger, multi-file project I'm working on. The goal was to have a single constant in the object file, that multiple files could use to initialize a state structure. Since it's an embedded target with limited resources and the struct isn't that small, I don't want multiple copies of the source. I'd prefer not to use: #define foo_init { 1, 2, 3 } I'm also trying to write portable code, so I need a solution that's valid C89 or C99. Does this have to do with the ORGs in an object file? That initialized variables go into one ORG and are initialized by copying the contents of a second ORG? Maybe I'll just need to change my tactic, and have an initializing function do all of the copies at startup. Unless there are other ideas out there?

  Read the article

• JAXB Unable To Handle Attribute with Colon (:) in name?

  - by Intellectual Tortoise

  I am attempting to use JAXB to unmarshall an XML files whose schema is defined by a DTD (ugh!). The external provider of the DTD has specified one of the element attributes as xml:lang: <!ATTLIST langSet id ID #IMPLIED xml:lang CDATA #REQUIRED > This comes into the xjc-generated class (standard generation; no *.xjb magic) as: @XmlAttribute(name = "xml:lang", required = true) @XmlJavaTypeAdapter(NormalizedStringAdapter.class) protected String xmlLang; However, when unmarshalling valid XML files with JAXB, the xmlLang attribute is always null. When I edited the XML file, replacing xml:lang with lang and changed the @XmlAttribute to match, unmarshalling was successful (i.e. attributes were non-null). I did find this http://old.nabble.com/unmarshalling-ignores-element-attribute-%27xml%27-td22558466.html. But, the resolution there was to convert to XML Schema, etc. My strong preference is to go straight from an un-altered DTD (since it is externally provided and defined by an ISO standard). Is this a JAXB bug? Am I missing something about "namespaces" in attribute names? FWIW, java -version = "build 1.6.0_20-b02" and xjc -version = "xjc version "JAXB 2.1.10 in JDK 6""

  Read the article

• Array Assignment

  - by Mahesh

  Let me explain with an example - #include <iostream> void foo( int a[2], int b[2] ) // I understand that, compiler doesn't bother about the // array index and converts them to int *a, int *b { a = b ; // At this point, how ever assignment operation is valid. } int main() { int a[] = { 1,2 }; int b[] = { 3,4 }; foo( a, b ); a = b; // Why is this invalid here. return 0; } Is it because, array decays to a pointer when passed to a function foo(..), assignment operation is possible. And in main, is it because they are of type int[] which invalidates the assignment operation. Doesn't a,b in both the cases mean the same ? Thanks. Edit 1: When I do it in a function foo, it's assigning the b's starting element location to a. So, thinking in terms of it, what made the language developers not do the same in main(). Want to know the reason.

  Read the article

• Problem monitoring directory for file activity in VB.net 2010...

  - by Mike Cialowicz

  I'm trying to write a simple program to monitor a folder for new files in VB.NET 2010, and am having some trouble. Here's a simplified version of what my program looks like: Imports System.IO Public Class Main Public fileWatcher As FileSystemWatcher Sub btnGo_Click(sender As System.Object, e As System.EventArgs) Handles btnGo.Click '//# initialize my FileSystemWatcher to monitor a particular directory for new files fileWatcher = New FileSystemWatcher() fileWatcher.Path = thisIsAValidPath.ToString() fileWatcher.NotifyFilter = NotifyFilters.FileName AddHandler fileWatcher.Created, AddressOf fileCreated fileWatcher.EnableRaisingEvents = True End Sub Private Sub fileCreated(sender As Object, e As FileSystemEventArgs) '//# program does not exit when I comment the line below out txtLatestAddedFilePath.Text = e.FullPath '//# e.FullPath is valid when I set a breakpoint here, but when I step into the next line, the program abruptly halts with no error code that I can see End Sub End Class As you can see, I have a button which will initialize a FileSystemWatcher when clicked. The initialization works, and when I place a new file in the monitored directory, the program reaches the fileCreated sub. I can even see that e.FullPath is set correctly. However, it exits abruptly right after that with no error code (none that I can see, anyways). If I comment everything in the fileCreated sub out, the program continues running as expected. Any ideas as to why it's dying on me? Any help would be greatly appreciated. I'm fairly new to VS/VB.NET, so maybe I'm just making a silly mistake. Thanks!

  Read the article

• sending address of a variable declared on the stack?

  - by kobac

  I have a doubt concerning declaring variables, their scope, and if their address could be sent to other functions even if they are declared on the stack? class A{ AA a; void f1(){ B b; aa.f2(&b); } }; class AA{ B* mb; f2(B* b){ mb = b; //... } }; Afterwards, I use my AA::mb pointer in the code. So things I would like to know are following. When the program exits A::f1() function, b variable since declared as a local variable and placed on the stack, can't be used anymore afterwards. What happens with the validity of the AA::mb pointer? It contains the address of the local variable which could not be available anymore, so the pointer isn't valid anymore? If B class is a std::<vector>, and AA::mb is not a pointer anymore to that vector, but a vector collection itself for example. I would like to avoid copying all of it's contents in AA::f2() to a member AA::mb in line mb = b. Which solution would you recommend since I can't assign a pointer to it, because it'll be destroyed when the program exits AA::f2()

  Read the article

• loading remote page into DOM with javascript

  - by scoobydoo

  I am trying to write a web widget which will allow users to display customized information (from my website) in their own web page. The mechanism I want to use (for creating the web widget) is javascript. So basically, I want to be able to write some javascript code like this (this is what the end user copies into their HTML page, to get my widget displayed in their page) <script type="text/javascript"> /* javascript here to fetch page from remote url and insert into DOM */ </script> I have two questions: how do I write a javascript code to fetch the page from the remote url? Ideally this will be PLAIN javascript (i.e. not using jQuery etc - since I dont want to force the user to get third party scripts jQuery which may conflict with other scripts on their page etc) The page I am fetching contains inline javascript, which gets executed in an body.onLoad event, as well as other functions which are used in response to user actions - my questions are: i). will the body.onLoad event be triggered for the retrieved document?. ii). If the retrieved page is dumped directly into the DOM, then the document will contain two <body> sections, which is no longer valid (X)HTML - however, I need the body.onLoad event to be triggered for the page to be setup correctly, and I also need the other functions in the retrieved page, for the retrieved page to be able to respond to the user interaction. Any suggestions/tips on how I can solve these problems?

  Read the article

• PHP : If...Else...Query

  - by Rachel

  I am executing this statement under while (($data=fgetcsv($this->fin,5000,";"))!==FALSE) Now what I want in else loop is to throw exception only for data value which did not satisfy the if condition. Right now am displaying the complete row as I am not sure how to throw exception only for data which does not satisfy the value. Code if ((strtotime($data[11]) &&strtotime($data[12])&&strtotime($data[16]))!==FALSE && ctype_digit($data[0]) && ctype_alnum($data[1]) && ctype_digit($data[2]) && ctype_alnum($data[3]) && ctype_alnum($data[4]) && ctype_alnum($data[5]) && ctype_alnum($data[6]) && ctype_alnum($data[7]) && ctype_alnum($data[8]) && $this->_is_valid($data[9]) && ctype_digit($data[10]) && ctype_digit($data[13]) && $this->_is_valid($data[14])) { //Some Logic } else { throw new Exception ("Data {$data[0], $data[1], $data[2], $data[3], $data[4], $data[5], $data[6], $data[7], $data[8], $data[9], $data[10], $data[11], $data[12], $data[13], $data[14], $data[16]} is not in valid format"); } Guidance would be highly appreciated as to how can I throw exception only for data which did not satisfy the if value.

  Read the article

• Obtaining XML from U.S. Postal Service (USPS) rate calculator API with PHP

  - by Chris F

  hoping somebody here can help me. I'm attempting to pull an XML page from the U.S. Postal Service (USPS) rate calculator, using PHP. Here is the code I am using (with my API login and password replaced of course): <? $api = "http://production.shippingapis.com/ShippingAPI.dll?API=RateV4&XML=<RateV4Request ". "USERID=\"MYUSERID\" PASSWORD=\"MYPASSWORD\"><Revision/><Package ID=\"1ST\">". "<Service>FIRST CLASS</Service><FirstClassMailType>PARCEL</FirstClassMailType>". "<ZipOrigination>12345</ZipOrigination><ZipDestination>54321</ZipDestination>". "<Pounds>0</Pounds><Ounces>9</Ounces><Container/><Size>REGULAR</Size></Package></RateV4Request>"; $xml_string = file_get_contents($api); $xml = simplexml_load_string($xml_string); ?> Pretty straightforward. However it never returns anything. I can paste the URL directly into my browser's address bar: http://production.shippingapis.com/ShippingAPI.dll?API=RateV4&XML=<RateV4RequestUSERID="MYUSERID" PASSWORD="MYPASSWORD"><Revision/><Package ID="1ST"><Service>FIRST CLASS</Service><FirstClassMailType>PARCEL</FirstClassMailType><ZipOrigination>12345</ZipOrigination><ZipDestination>54321</ZipDestination><Pounds>0</Pounds><Ounces>9</Ounces><Container/><Size>REGULAR</Size></Package></RateV4Request> And it returns the XML I need, so I know the URL is valid. But I cannot seem to capture it using PHP. Any help would be tremendously appreciated. Thanks in advance.

  Read the article

• SHGetFolderPath

  - by user530589

  This code works for windows 7 but doesn't work for windows XP (outputs only part of startup folder path) #include <iostream> #include <shlobj.h> using namespace std; int main() { wchar_t startupFolder[1024]; HRESULT hr = SHGetFolderPath(0, CSIDL_STARTUP, 0, 0, startupFolder); if (SUCCEEDED(hr)) wcout << L"Startup folder = " << startupFolder << endl; else cout << "Error when getting startup folder\n"; getchar(); return 0; } output is: Startup folder = C:\Documents and Settings\Admin\ <- cursor is here. Newline is not provided. Also I have russian window xp. I think this is unicode issue. when I use wprintf I got: C:\Documents and Settings\Admin\???????? ..... Thanks. As a temporary solution: After SHGetFolderPath I call GetShortPathName then I get path in msdos style: C:\DOCUME~1\Admin\5D29~1\4A66~1\60C2~1 Not really beautiful solution, but at least that is a valid path.

  Read the article

• Pass NSURL from One Class To Another

  - by user717452

  In my appDelegate in didFinishLaunchingWithOptions, I have the following: NSURL *url = [NSURL URLWithString:@"http://www.thejenkinsinstitute.com/Journal/"]; NSString *content = [NSString stringWithContentsOfURL:url]; NSString * aString = content; NSMutableArray *substrings = [NSMutableArray new]; NSScanner *scanner = [NSScanner scannerWithString:aString]; [scanner scanUpToString:@"<p>To Download the PDF, " intoString:nil]; // Scan all characters before # while(![scanner isAtEnd]) { NSString *substring = nil; [scanner scanString:@"<p>To Download the PDF, <a href=\"" intoString:nil]; // Scan the # character if([scanner scanUpToString:@"\"" intoString:&substring]) { // If the space immediately followed the #, this will be skipped [substrings addObject:substring]; } [scanner scanUpToString:@"" intoString:nil]; // Scan all characters before next # } // do something with substrings NSString *URLstring = [substrings objectAtIndex:0]; self.theheurl = [NSURL URLWithString:URLstring]; NSLog(@"%@", theheurl); [substrings release]; The console printout for theheurl gives me a valid URL ending in .pdf. In the class I would like to load the URL, I have the following: - (void)viewWillAppear:(BOOL)animated { _appdelegate.theheurl = currentURL; NSLog(@"%@", currentURL); NSLog(@"%@", _appdelegate.theheurl); [worship loadRequest:[NSURLRequest requestWithURL:currentURL cachePolicy:NSURLRequestReloadIgnoringLocalCacheData timeoutInterval:60.0]]; timer = [NSTimer scheduledTimerWithTimeInterval:(1.0/2.0) target:self selector:@selector(tick) userInfo:nil repeats:YES]; [super viewWillAppear:YES]; } However, both NSLogs in that class come back null. What am I Doing wrong in getting the NSURL from the AppDelegate to the class to load it?

  Read the article

• .NET List Thread-Safe Implementation Suggestion needed

  - by Bamboo

  .Net List class isn't thread safe. I hope to achieve the minimal lock needed and yet still fulfilling the requirement such that as for reading, phantom record is allowed, and for writing, they must be thread-safe so there won't be any lost updates. So I have something like public static List<string> list = new List<string>(); In Methods that have **List.Add**/**List.Remove** , I always lock to assure thread safety lock (lockHelper) { list.Add(obj); or list.Remove(obj); } In Methods that requires **List Reading** I don't care about phantom record so I go ahead to read without any locking. In this case. Return a bool by checking whether a string had been added. if (list.Count() != 0) { return list.Contains("some string") } All I did was locking write accesses, and allow read accesses to go through without any locking. Is my thread safety idea valid? I understand there is List size expansion. Will it be ok? My guess is that when a List is expanding, it may uses a temp. list. This is ok becasue the temp list size will always have a boundary, and .Net class is well implemented, ie. there shouldn't be any indexOutOfBound or circular reference problems when reading was caught in updates.

  Read the article

• Union and order by

  - by David Lively

  Consider a table like tbl_ranks -------------------------------- family_id | item_id | view_count -------------------------------- 1 10 101 1 11 112 1 13 109 2 21 101 2 22 112 2 23 109 3 30 101 3 31 112 3 33 109 4 40 101 4 51 112 4 63 109 5 80 101 5 81 112 5 88 109 I need to generate a result set with the top two(2) rows for a subset of family ids (say, 1,2,3 and 4) ordered by view count. I'd like to do something like select top 2 * from tbl_ranks where family_id = 1 order by view_count union all select top 2 * from tbl_ranks where family_id = 2 order by view_count union all select top 2 * from tbl_ranks where family_id = 3 order by view_count union all select top 2 * from tbl_ranks where family_id = 4 order by view_count but, of course, order by isn't valid in a union all context in this manner. Any suggestions? I know I could run a set of 4 queries, store the results into a temp table and select the contents of that temp as the final result, but I'd rather avoid using a temp table if possible. Note: in the real app, the number of records per family id is indeterminate, and the view_counts are also not fixed as they appear in the above example.

  Read the article

• What is a good solution to log the deletion of a row in MySQL?

  - by hobodave

  Background I am currently logging deletion of rows from my tickets table at the application level. When a user deletes a ticket the following SQL is executed: INSERT INTO alert_log (user_id, priority, priorityName, timestamp, message) VALUES (9, 4, 'WARN', NOW(), "TICKET: David A. deleted ticket #6 from Foo"); Please do not offer schema suggestions for the alert_log table. Fields: user_id - User id of the logged in user performing the deletion priority - Always 4 priorityName - Always 'WARN' timestamp - Always NOW() message - Format: "[NAMESPACE]: [FullName] deleted ticket #[TicketId] from [CompanyName]" NAMESPACE - Always TICKET FullName - Full name of user identified by user_id above TicketId - Primary key ID of the ticket being deleted CompanyName - Ticket has a Company via tickets.company_id Situation/Questions Obviously this solution does not work if a ticket is deleted manually from the mysql command line client. However, now I need to. The issues I'm having are as follows: Should I use a PROCEDURE, FUNCTION, or TRIGGER? -- Analysis: TRIGGER - I don't think this will work because I can't pass parameters to it, and it would trigger when my application deleted the row too. PROCEDURE or FUNCTION - Not sure. Should I return the number of deleted rows? If so, that would require a FUNCTION right? How should I account for the absence of a logged in user? -- Possibilities: Using either a PROC or FUNC, require the invoker to pass in a valid user_id Require the user to pass in a string with the name Use the CURRENT_USER - meh Hard code the FullName to just be "Database Administrator" Could the name be an optional parameter? I'm rather green when it comes to sprocs. Assuming I went with the PROC/FUNC approach, is it possible to outright restrict regular DELETE calls to this table, yet still allow users to call this PROC/FUNC to do the deletion for them? Ideally the solution is usable by my application as well, so that my code is DRY.

  Read the article

• Display error message at top of form

  - by moustafa

  Hello, I'm trying to get the following error to show when some once presses the submit button and has not filled in the required field/s. My PHP code is. <?php require_once("includes/database.php"); require_once("includes/functions.php"); if(isset($_POST['full_name'])) { $required = array('full_name','user_name','email','pwd','pwd2'); $missing = array(); $validation = array( 'full_name' => 'Please provide your full name', 'user_name' => 'Please provide your username', 'email' => 'Please provide your valid email address', 'pwd' => 'Please provide your password', 'pwd2' => 'Please confirm your password', 'userdup' => 'Username already registered', 'emaildup' => 'Email address already registered', 'mismatch' => 'Passwords do not match' ); //Sanitise and clean function $full_name = escape($_POST['full_name']); $user_name = escape($_POST['user_name']); $email = escape($_POST['email']); $pwd = escape($_POST['pwd']); $pwd2 = escape($_POST['pwd2']); foreach($_POST as $key => $value) { $value = trim($value); if(empty($value) && in_array($key,$required)) { array_push($missing,$key); } else { ${$key} = escape($value); } }

  Read the article

• Why does false invalidate validates_presence_of?

  - by DJTripleThreat

  Ok steps to reproduce this: prompt> rails test_app prompt> cd test_app prompt> script/generate model event_service published:boolean then go into the migration and add not null and default published to false: class CreateEventServices < ActiveRecord::Migration def self.up create_table :event_services do |t| t.boolean :published, :null => false, :default => false t.timestamps end end def self.down drop_table :event_services end end now migrate your changes and run your tests: prompt>rake db:migrate prompt>rake You should get no errors at this time. Now edit the model so that you validate_presence_of published: class EventService < ActiveRecord::Base validates_presence_of :published end Now edit the unit test event_service_test.rb: require 'test_helper' class EventServiceTest < ActiveSupport::TestCase test "the truth" do e = EventServer.new e.published = false assert e.valid? end end and run rake: prompt>rake You will get an error in the test. Now set e.published to true and rerun the test. IT WORKS! I think this probably has something to do with the field being boolean but I can't figure it out. Is this a bug in rails? or am I doing something wrong?

  Read the article

• What's the point of indicating AllowMultiple=false on an abstract Attribute class?

  - by tvanfosson

  On a recent question about MVC attributes, someone asked whether using HttpPost and HttpDelete attributes on an action method would result in either request type being allowed or no requests being allowed (since it can't be both a Post and a Delete at the same time). I noticed that ActionMethodSelectorAttribute, from which HttpPostAttribute and HttpDeleteAttribute both derive is decorated with [AttributeUsage(AttributeTargets.Method, AllowMultiple = false, Inherited = true)] I had expected it to not allow both HttpPost and HttpDelete on the same method because of this, but the compiler doesn't complain. My limited testing tells me that the attribute usage on the base class is simply ignored. AllowMultiple seemingly only disallows two of the same attribute from being applied to a method/class and doesn't seem to consider whether those attributes derive from the same class which is configured to not allow multiples. Moreover, the attribute usage on the base class doesn't even preclude your from changing the attribute usage on a derived class. That being the case, what's the point of even setting the values on the base attribute class? Is it just advisory or am I missing something fundamental in how they work? FYI - it turns out that using both basically precludes that method from ever being considered. The attributes are evaluated independently and one of them will always indicate that the method is not valid for the request since it can't simultaneously be both a Post and a Delete.

  Read the article

• OpenCalais API using jQuery

  - by Varun

  Hi I've wanted to do some language processing for an application and have been trying to use the OpenCalais API. The call to the API works perfectly and returns data. The problem is that even though I can see the data in the firebug, I cannot access it because the callback never triggers. Details: the call requires callback=? as it is a JSONP request. so callback=foo SHOULD call the foo method once the data is returned, it doesn't. in fact, if callback is anything other than ? the call fails and doesn't return any data. (i've also checked JSLint to make sure the returned JSON is valid). tried using $.ajax instead of $.getJSON so that I can get an error callback, but neither the success or error callbacks fire. in firebug, usually when you make a JSON request, the request shows up in the console. In this case, the request doesn't show up in the console, but instead shows in the "Net" tab in firebug...dunno what that means, but somehow the browser doesn't think its an XHR request. any ideas? thanks.

  Read the article

• Are multiline queries sql-injection safe?

  - by acmatos

  This might be a stupid question. Or maybe my hacking skills are limited (I don't practice them at all). I have a query that looks like this: <?php $query =<<<eot SELECT table_x.field1, table_x.field2, table_y.*, table_z.field4 FROM ( SELECT ... ) as table_y LEFT JOIN table_x ON table_x.field1 = table_y.field_x LEFT JOIN table_z ON table_z.field1 = table_y.field_z WHERE table_x.field3 = '$something' AND table_z.field4 = '1' AND table_z.field5 = '2' eot; ?> I have a lot of other tests on $something before it gets used, like $something = explode(' ',$something); (which later result in a string) none of them intend to prevent injection but they make it hard for the given injection to get as is to the actual query. However, there are ways. We all know how easy it is to replace a space for something else which is still valid.. So, it's not really a problem to make a potentially harmful piece of SQL reach that $something... But is there any way to comment the rest of the original query string if it is multi-line? I can comment AND table_z.field4 = '1' using ;-- but can't comment the following AND table_z.field5 = '2' Is it possible to open a multi-line comment /* without closing it or something looked like and therefore allow the injection to ignore the multi-line query?

  Read the article

• byte and short data types in Java can accept the value outside the range by explicit cast. The higher data types however can not. Why?

  - by Lion

  Let's consider the following expressions in Java. byte a = 32; byte b = (byte) 250; int i = a + b; This is valid in Java even though the expression byte b = (byte) 250; is forced to assign the value 250 to b which is outside the range of the type byte. Therefore, b is assigned -6 and consequently i is assigned the value 26 through the statement int i = a + b;. The same thing is possible with short as follows. short s1=(short) 567889999; Although the specified value is outside the range of short, this statement is legal. The same thing is however wrong with higher data types such int, double, folat etc and hence, the following case is invalid and causes a compile-time error. int z=2147483648; This is illegal, since the range of int in Java is from -2,147,483,648 to 2147483647 which the above statement exceeds and issues a compile-time error. Why is such not wrong with byte and short data types in Java?

  Read the article

• Switching application-wide theme programmatically?

  - by Cheezmeister

  EDIT: Related question here: Multi theme support in android app I'm attempting to get a user-chosen theme and feel like I'm frustratingly close. Defining the theme in AndroidManifest.xml works as it should, but (as best I can tell) can't change based on app preferences: <application android:theme="@style/theme_sunshine" android:icon="@drawable/icon" android:label="@string/app_name"> Alternatively, setting it dynamically in each activity also works: someChosenTheme = PreferenceManager.getDefaultSharedPreferences(this).getString("themePreference", "theme_twilight"); setTheme(someOtherChosenTheme); But that seems messy, and I'd rather set the theme for the entire app in one place. My first thought was to grab the application context as soon as my main activity launches and do it there: getApplicationContext().setTheme(R.style.theme_dummy); As best I can tell[0], this ought to do the trick, but in fact it's not doing anything--the entire app has the default Android style. Is the above valid, and if so, might I be doing something else dumb? I'm working in API level 3 if that matters. Prods in the right direction greatly appreciated! [0] http://developer.android.com/reference/android/content/Context.html#setTheme%28int%29 http://developer.android.com/reference/android/content/Context.html#getApplicationContext%28%29

  Read the article

• why does vector.size() read in one line too little?

  - by ace

  when running the following code, the amount of lines will read on less then there actually is (if the input file is main itself, or otherwise) why is this and how can i change that fact (besides for just adding 1)? #include <fstream> #include <iostream> #include <string> #include <vector> using namespace std; int main() { // open text file for input string file_name; cout << "please enter file name: "; cin >> file_name; // associate the input file stream with a text file ifstream infile(file_name.c_str()); // error checking for a valid filename if ( !infile ) { cerr << "Unable to open file " << file_name << " -- quitting!\n"; return( -1 ); } else cout << "\n"; // some data structures to perform the function vector<string> lines_of_text; string textline; // read in text file, line by line while (getline( infile, textline, '\n' )) { // add the new element to the vector lines_of_text.push_back( textline ); // print the 'back' vector element - see the STL documentation cout << "line read: " << lines_of_text.back() << "\n"; } cout<<lines_of_text.size(); return 0; }

  Read the article

• session_set_cookie_params on multi-domain sites

  - by nillls

  Hi! I'm currently developing for an application (www.domain.se, .eu) where we're experiencing problems with sessions not propagating across domains. Internet Explorer is the root cause of this, as it will differentiate sessions depending on whether we're typing in "domain.se" or "www.domain.se". Due to some unfortunate redirecting, we're not able to keep the user on the same address the user typed in, instead we're always redirecting to www.domain.se on login. Needless to say, IE users can not login when typing "domain.se". To make this error go away, we implemented a function to try and set the session to be valid across all possible domains by doing the following: if($_SERVER['HTTP_HOST'] == "domain.se") { session_set_cookie_params(3600, '/', '.domain.se', true); } There are basically a few if:s that we go through depending on what address the user typed in, but the third argument stays the same. This, however, results in no-one being able to log in, regardless of domain. I've tried reading up on how session_set_cookie_params() works but to no avail. Any help is greatly appreciated!

  Read the article

• Initializing an object to all zeroes

  - by dash-tom-bang

  Oftentimes data structures' valid initialization is to set all members to zero. Even when programming in C++, one may need to interface with an external API for which this is the case. Is there any practical difference between: some_struct s; memset(s, 0, sizeof(s)); and simply some_struct s = { 0 }; Do folks find themselves using both, with a method for choosing which is more appropriate for a given application? For myself, as mostly a C++ programmer who doesn't use memset much, I'm never certain of the function signature so I find the second example is just easier to use in addition to being less typing, more compact, and maybe even more obvious since it says "this object is initialized to zero" right in the declaration rather than waiting for the next line of code and seeing, "oh, this object is zero initialized." When creating classes and structs in C++ I tend to use initialization lists; I'm curious about folks thoughts on the two "C style" initializations above rather than a comparison against what is available in C++ since I suspect many of us interface with C libraries even if we code mostly in C++ ourselves.

  Read the article

< Previous Page | 201 202 203 204 205 206 207 208 209 210 211 212  | Next Page >