Search Results

Search found 54503 results on 2181 pages for 'net mvc'.

Page 2055/2181 | < Previous Page | 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062  | Next Page >

• Missing drive space in Server 2003

  - by Tim Brigham

  I have two drives used for SQL backups which for the last week have been acting strange - the free space indicated by windows is far off from what windirstat, etc indicates. There should only be about 60 GB of drive space used and there is about 160. This would match the utilization if the two last backup files were still residing on disk. SQL server is 2000, OS Server 2003 x64. Running on a VMware 5.0 cluster. OSSEC and McAfee for this system shows clean. My current plan is to temporarily attach one of these drives this drive to another VM for analysis. Is there anything more I should be looking at? There were a lot of pages on the net when I was looking for documentation on this issue but I haven't found this case described. EDIT: Unfortunately even a full reboot did not clear this behavior. I also used process explorer to look for open file handles. No dice.

  Read the article

• Sparc Solaris 2.6 will not boot

  - by joshxdr

  I have a very old Sparc Solaris network that was working fine last week, but after a power outage none of the workstations will boot. The network looks like this: host A: solaris 2.6, shares /export/home to network by NFS host B: solaris 8, runs NIS server. Mounts /export/home/ by NFS. host C: RHEL5, shares /share to network by NFS. Mounts /export/home/ by NFS. I figured that the main problem was host A, since you need the home directories available for the other workstations to boot(?). Host A does not mount anything by NFS as far as I know. However, this workstation will NOT boot. The OBP bootup sequence looks like this: Boot device <blah> configuring network interface le0 Hostname <hostname> check file system <everything ok> check ufs filesystem <everything ok> NIS domainname is <name> starting router discovery starting rpc services: rpcbind keyserv ypbind done setting default interface for multicast: add net 224.0.0.0: gateway <hostname> <HANGS at this point> Is there some kind of debug mode so that I can get more detail as to why the workstation won't boot? Is my network structure inherently susceptible to power outage? Is there a way I can boot up to command line so I can at least turn off the NFS mounting?

  Read the article

• Trouble with port 80 nating (XenServer to WebServer VM)

  - by Lain92

  I have a rent server running XenServer 6.2 I only have 1 public IP so i did some NAT to redirect ports 22 and 80 to my WebServer VM. I have a problem with the port 80 redirection. When i use this redirection, i can get in the WebServer's Apache but this server lose Web access. I get this kind of error : W: Failed to fetch http://http.debian.net/debian/dists/wheezy/main/source/Sources 404 Not Found [IP: 46.4.205.44 80] but i can ping anywhere. XenserverIP:80 redirected to 10.0.0.2:80 (WebServer). This is the port 80 redirection part of my XenServer iptables : -A PREROUTING -i xenbr1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 10.0.0 .2:80 -A INPUT -i xenbr1 -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT COMMIT What is wrong in my configuration? Is there a problem with XenServer? Thanks for your help ! Edit : Here is my iptables full content : *nat :PREROUTING ACCEPT [51:4060] :POSTROUTING ACCEPT [9:588] :OUTPUT ACCEPT [9:588] -A PREROUTING -p tcp -m tcp --dport 1234 -j DNAT --to-destination 10.0.0.2:22 -A PREROUTING -i xenbr1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 10.0.0 .2:80 -A POSTROUTING -s 10.0.0.0/255.255.255.0 -j MASQUERADE COMMIT *filter :INPUT ACCEPT [5434:4284996] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [5014:6004729] -A INPUT -i xenbr1 -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT COMMIT Update : I have a second server with 10.0.0.3 as IP and it has the same problem that 10.0.0.2 has.

  Read the article

• Intel Ethernet Bottlenecking Internet?

  - by Donald Darma

  I'm having trouble with my internet speeds. So I just recent build a pc and everything is fine. I installed the Intel drivers and connected to the internet. It connects but I'm only half the speed I should be getting. My normal speed is 20mbps but speedtest.net is only showing 10. It can't be my ISP (which is TWC if anyone is asking) because my other devices like my laptop and my smartphone are showing 20 down. Heres my system: CPU: i5 4430 HSF: Stock cooler Mobo: Gigabyte Z87MX-D3H GPU: x2 MSI R7950-3GD5/OC BE RAM: Crucial Ballistix Tactical Tracer 8GB dual channel PSU: Silencer High Performance Power Supply 750 Watt 80+ (It's a subdivision of OCZ) HDD: Seagate Barracuda 7200RPM 3TB SSD: Samsung 840 Evo 120 GB Case: Corsair Obsidian 350D Edit: I am using the stock adapter that is on the motherboard. I know for a fact that the cable is good because I used it on my laptop and it ran fine. Its a CAT5E cable. I also ran IPERF and its giving me the same results, 10 mbps.

  Read the article

• In Stud, which Private RSA Key should be concatenated in the x509 SSL certificate pem file to avoid "self-signed" browser warning?

  - by Aaron

  I'm trying to implement Stud as an SSL termination point before HAProxy as a proof of concept for WebSockets routing. My domain registrar Gandi.net offers free 1-year SSL certs. Through OpenSSL, I generated a CSR which gave me two files: domain.key domain.csr I gave domain.csr to my trusted authority and they gave me two files: domain.cert GandiStandardSSLCA.pem (I think this is referred to as the intermediary cert?) This is where I encountered friction: Stud, which uses OpenSSL, expects there to be an "rsa private key" in the "pem-file" - which it describes as "SSL x509 certificate file. REQUIRED." If I add the domain.key to the bottom of Stud's pem-file, Stud will start but I receive the browser warning saying "The certificate is self-signed." If I omit the domain.key Stud will not start and throws an error triggered by an OpenSSL function that appears intended to determine whether or not my "pem-file" contains an "RSA Private Key". At this point I cannot determine whether the problem is: Free SSL cert will always be self-signed and will always cause browser to present warning I'm just not using Stud correctly I'm using the wrong "RSA private key" The CA domain cert, the intermediary cert, and the private key are in the wrong order.

  Read the article

• Windows Server 2008 R2 Virtual Network Setup

  - by jpearl01

  Some background: I'm very much new to networking in general, and virtualization in particular. I'm trying to set up a series of VMs as we are transitioning to a thin client setup. I have been supplied a limited number of static ip addresses. The server is located in an offsite building which houses the network we use to connect to the internet, share folders etc. The setup I've been trying to go for is this: The host OS (Windows Server 2008 R2) is bound to one nic using one of the static ips (say, Nic1 and ip 10.255.6.61). I've set up another external virtual network attached to another physical nic , and a virtual private network attached to no nic. There is one VM running the same os (as the host). This VM is connected to both the external virtual network (and uses another static ip say Nic2 and ip 10.255.6.62) and also to the virtual private network (I gave it a static random ip 192.168.88.1 subnet mask 255.255.255.0). This virtual private network is connected to all the other VMs. I'd like to share the internet connection with all the other VMs on the private virtual network, and so I installed the RRAS role on the server connected to Nic2, and selected the option to share the internet over the vpn. I've run through the RRAS wizard a few times, trying different configurations, but none of them seem to be letting the other vms connect to the 'net. The vms seem to connect to the virtual private network fine, they are assigned an ip address and everything, but no internet, and no rest of the network either. The other problem is in general I connect to the vms with RDP. Will that be possible with a setup like this? i.e. will the vms show up as computers on the network? If not, what are my other options? Thanks! ~josh

  Read the article

• Lots of strange IP addresses in my Windows Firewall logs. Concern?

  - by gmoore

  Was trying to debug a Samba sharing issue with Mac OS X so I turned on logging for my Windows Firewall. I didn't expect a lot of conections but the thing filled up quickly. Here's a sample: 2009-12-21 08:49:32 OPEN-INBOUND TCP 192.168.0.4 192.168.0.3 56335 139 - - - - - - - - - 2009-12-21 08:49:33 OPEN-INBOUND TCP 192.168.0.4 192.168.0.3 56337 139 - - - - - - - - - 2009-12-21 08:50:02 OPEN UDP 192.168.0.3 68.87.73.242 1389 53 - - - - - - - - - 2009-12-21 08:50:02 CLOSE TCP 192.168.0.3 212.96.161.238 1391 80 - - - - - - - - - 2009-12-21 08:50:02 OPEN UDP 192.168.0.3 68.87.71.226 60290 53 - - - - - - - - - 2009-12-21 08:50:02 OPEN TCP 192.168.0.3 212.96.161.238 1391 80 - - - - - - - - - 2009-12-21 08:50:02 OPEN TCP 192.168.0.3 212.96.161.238 1393 80 - - - - - - - - - 2009-12-21 08:50:04 CLOSE TCP 192.168.0.3 212.96.161.238 1393 80 - - - - - - - - - 2009-12-21 08:50:41 CLOSE UDP 192.168.0.3 192.168.0.4 137 50300 - - - - - - - - - I can pick out the local IP addresses (192.168.0.3 is my Windows XP machine, 192.169.0.4 is Mac OS X) as I debug the Samba issue. But some of the others resolve to Comcast (my ISP) and others resolve to weird hosts like van-dns.com and navisite.net. It doesn't look like any connection sent/received any bytes. I used the reference here: http://technet.microsoft.com/en-us/library/cc758040%28WS.10%29.aspx. Is it a cause for concern?

  Read the article

• then an error occurred during the login process - Connection Error 233

  - by scott brunner

  We have SQL Server 2008 installed on 64Bit Windows Server 2003. When we try connect to the local SQL Server using SQL Server Management Studio at the console, we get the error: A connection was successfully established with the server, but then an error occurred during the login process. provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe. When we try TCP from same local SSMS to local server, we get the same error but intead of the pipe message its something like "connection forcibly closed". Now, here is the strange part - we CAN connect to this SQL Server from any other machine on the network using SSMS. - AND - WE CAN'T connect to ANY SQL Server from the problem server. So it seems the SQL Server instance is fine and accepting remote connections. However, the SSMS on that machine will not connect to any SQL Server even remotely. When we try an ADO.NET connection from C# remotely we can connect, run that same code on the console of the trouble server and we get the same errors. How can this be solved?

  Read the article

• Site Goes Offline Every Day At Midnight - No One Knows Why

  - by HollerTrain

  0 down vote favorite Seems today a website I manage has been going online and offline between 12a and 12:25a. I have no idea what is causing the issue so I am seeking guidance on where to start. It is a Wordpress based site. So here is what I DO know: I have a pingdom account which alerts me when the site goes offline so we can see every day, like clockwork, the site goes on/off. At the time of the ups/downs I see a lot of strain on the memory usage. Look at the load average when the site is going online/offline (http://screencast.com/t/BRlfXkqrbJII). Then I ran this command to restart http (http://screencast.com/t/usVtYWZ2Qi) and the memory usage then goes down to this (http://screencast.com/t/VdTIy3bgZiQB). An hour after I restarted http, the site then went offline/online so restarting the http didn't do much help. When the site is going offline/online, I ran the top command and get this (http://screencast.com/t/zEwr7YQj3). Here is a top command when the site is at it's lowest (http://screencast.com/t/eaMfha9lbT - so this would be dubbged "normal"). Here is a bandwidth report (http://screencast.com/t/AS0h2CH1Gypq). The traffic doesn't seem to be that much (http://screencast.com/t/s7hrWNNic1K), but looking at my times the site is going up/down this may be one of the reasons? I have the dvp Nitro package at Media Temple (http://mediatemple.net/webhosting/nitro/). So at this point I would request some help in trying to figure out what the cause of this is, and how I can go about pinpointing this issue. ANY HELP is greatly appreciated.

  Read the article

• TEMP environment variable occasionally set incorrectly

  - by Roger Lipscombe

  Occasionally, I find my TEMP and TMP environment variables set to C:\Windows\TEMP. They should be set to %USERPROFILE%\AppData\Local\Temp, and are configured correctly in System Properties. This manifests itself as error messages like the following: ---> System.InvalidOperationException: Unable to generate a temporary class (result=1). error CS2001: Source file 'C:\Windows\TEMP\gb_pz65v.0.cs' could not be found error CS2008: No inputs specified ...which occurs in various .NET applications (in particular Visual Studio 2010 or SQL Server Management Studio). Alternatively, SQL Server Management Studio will report: Value cannot be null. Parameter name: viewInfo (Microsoft.SqlServer.Management.SqlStudio.Explorer) If I run PowerShell elevated, then $env:TEMP is set correctly. If I run PowerShell non-elevated, then it's not. I believe that it should be set correctly in both cases. If not, it's the wrong way round. The same is true for CMD.EXE. Rebooting fixes it, temporarily, until something breaks it again. Presumably something loaded into Explorer.exe is messing with its environment variables, but what? The values in the registry are correct, even while this is happening: HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Environment has TEMP = %SYSTEMROOT%\Temp HKCU\Environment has TEMP = %USERPROFILE%\AppData\Local\Temp By setting a breakpoint on shell32!RegenerateUserEnvironment, I'm able to trap it when it happens, but I still don't know why explorer.exe is reading the wrong environment variables. I can reproduce it consistently by broadcasting a WM_SETTINGCHANGE message (I wrote a one-line C++ program to do this). Watching the activity in Process Monitor shows that explorer.exe doesn't even look at HKCU\Environment. What is going on?

  Read the article

• Set up Linux box as WAP for MyBookLive?

  - by AcidFlask

  I inherited an old Linux box as well as a MyBookLive and would like to make the MyBookLive available over my wireless, essentially using the Linux box as a wireless access point. I just wiped the Linux box (home) and installed Ubuntu 12.04 on it. My network setup currently looks like this: (192.168.0.1 netmask 255.255.255.0) ISP --- wireless router --- wlan0 on home (192.168.0.12) | eth0 on home --- MyBookLive MacBook (192.168.0.11) so that the MyBookLive is basically a glorified external hard drive. The router does have an Ethernet port, but it is being used by my roommate's computer so I can't plug the MyBookLive directly into it. Right now I can ping MyBookLive.local and MacBook.local from home, but I am having trouble understanding and figuring out what the correct iptables commands are to make my MacBook see my MyBookLive through the Bonjour network. Also, I'm not sure if I need to set up DNS to forward xxx.local Bonjour/Zeroconf addresses. I tried the following to forward my entire wired network (which has only my MyBookLive) to a single IP address: sysctl net.ipv4.ip_forward=1 iptables -A FORWARD -i wlan0 -o eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o wlan0 -j ACCEPT iptables -t nat -A PREROUTING -i eth0 -p tcp -j DNAT --to 192.168.0.66 iptables -t nat -A PREROUTING -i eth0 -p udp -j DNAT --to 192.168.0.66 but I can't ping this address from my MacBook. This is probably horribly wrong, but I am a complete noob at setting up this kind of network and could use some expert help with setting this up properly.

  Read the article

• Synchronize Active Directory to Database

  - by Tommy Jakobsen

  We are in a situation where we would like to offer our customers to be able to manage their users themselves. It is around 300 customers with up to a total of 10.000 users. Besides creating, updating and removing users, they will very often read information about users for statics and other useful informations available. All this functionality, should be available from an Intranet web page (.NET Framework 4) that the users will access through Citrix or similar. Now the problem is that we would really like the users not to query AD directly for each request, but rather make them hit a database that is synchronized with AD. It would be sufficient to run this synchronization a few time each day (maybe every 5. hour). When they create a user, it should not be available right away, but reviewed and then created within two days (the next step would be to remove this manual review, but that's out of scope for this question). What do you think about this synchronization of AD? Does anyone have any experience with it and is it something that is done in other organizations, where you will have lots of requests which is better handled by a database than AD (I presume)? Are there any techniques out there for writing such a script that synchronizes AD with database tables? My primary concern is the groups/members relations which can be rather complicated. Or are there software that synchronizes AD with a database? Any comments will be much appreciated. Thank you.

  Read the article

• VPN sharing on Mac OS X 10.5 machine

  - by Jens

  I have a rather weird problem. I want to share a VPN connection that has been established by my Mac OS X 10.5 computer with another machine in my network. This is what I did: In the /etc/hostcongig file on the main computer I added the line: IPFORWARDING=-YES- I assigned a fixed IP address to my computer (192.168.178.30), a fixed one to the other machine (192.168.178.60) and my computer's IP address as gateway on the other machine. I connected to my VPN using the internal Mac OS X VPN client (PPTP connection) I run this script: #!/bin/sh natd -same_ports -use_sockets -unregistered_only -dynamic -interface ppp0 -clamp_mss ipfw -f flush ipfw add divert natd ip from any to any via ppp0 ipfw add pass all from any to any sysctl -w net.inet.ip.forwarding=1 Source: Using (and sharing) a VPN connection on your Mac Now everthing works smootly, however speed is an issue. I get 1,8 MBit/s on my main machine and only 0,3 - 0,6 MBit/s on the other one. My question: What could possibly be wrong? Do I have to tweak MTU settings, is there any packet inspection ongoing that needs time....? Any help appreciated!

  Read the article

• esx5 debian VM vlan setup

  - by Kstro21

  i have a server with ESX5, have a switch with about 20 vlans, this is how setup the trunk port interface GigabitEthernet0/1/1 description ToOper port link-type trunk undo port trunk allow-pass vlan 1 port trunk allow-pass vlan 2 to 14 stp disable ntdp enable ndp enable bpdu enable then, i created a standar switch(sw1) using the vSphere Client, the VLAN ID is set to All (4095), i also created a VM with Debian 6, with a NIC connected to sw1, now, i want to configure this NIC for a selected group of vlans auto vlan10 iface vlan10 inet static address 11.10.1.0 netmask 255.255.255.224 mtu 1500 vlan_raw_device eth0 auto vlan14 iface vlan14 inet static address 11.10.1.65 netmask 255.255.255.248 mtu 1500 vlan_raw_device eth0 so, when i restart the network using /etc/init.d/networking restart, i got this error Reconfiguring network interfaces...SIOCSIFADDR: No such device vlan14: ERROR while getting interface flags: No such device SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device vlan14: ERROR while getting interface flags: No such device SIOCSIFMTU: No such device vlan14: ERROR while getting interface flags: No such device Failed to bring up vlan14. done. this is just part of the error, so, my questions is: is this possible?, i mean, what i'm trying to achieve using ESX Virtual Machines, VLANS, etc is this a Debian problem? can be solved? i've read about a file named z25_persistent-net.rules in Debian but it doesn't exist in my installation. in the In the vSphere Networking for ESX5 guide, you can read: If you enter 0 or leave the option blank, the port group can see only untagged (non-VLAN) traffic. If you enter 4095, the port group can see traffic on any VLAN while leaving the VLAN tags intact. So, in theory, it should work, right? Hope you can help me up with this one Thanks

  Read the article

• can't get to admin page after factory reset netgear wg602

  - by stefanB

  I have wireless Netgear wg602 on my home network (connected to my internet modem/router). I've had it secured and locked down to only accept connection from specific MAC addresses. I've forgotten the password that I used but my Mac Book laptops can still connect (multiple OS updates - it can't retrieve and display the password but it can use it to log in to WPA) so I want to reconfigure it from scratch (have some new devices). I tried to reset the Netgear wg602 to factory settings (pressed reset button for 10 sec), reset my laptop IP address to local address suggested in manual (192.168.0.210 net mask 255.255.255.0), connect Netgear via ethernet cable to my mac book pro but I can't get to the admin page at 192.168.0.227 as suggested by manual (firefox or safari). At this stage the Netgear is not connected to router, it is only connected to mac book. I can't ping the wireless access point either (but it is on all lights are on). What am I doing incorrectly? Last time I configured it via Windows now I only have Mac Book (which I've used with the wireless access point for 2 years so no compatibility problems).

  Read the article

• Limiting bandwith on an Windows 7 machine

  - by Mihai Damian

  I need to limit the bandwidth on my Windows 7 x64 machine. In the past (on XP) I've been able to use NetLimiter for similar tasks. However for some reason I can't get it to work anymore. For lower limits the bandwidth tests are able to exceed the limit by 10-50%; higher limits seem to be ignored completely and the bandwidth tests report download speeds of over 10 times the speed I set. I'm using speedtest.net and some similar service from my ISP for these tests. Anyway, I don't necessarily need a program as complex as NetLimiter since I only need to throttle my machine's bandwidth, not a specific program's. In case you are wondering why in the world I'd want to cripple my Internet speed, there is a funny story behind this. Long story short, my modem gets random disconnects. Tech support comes in, says my Internet speed is abnormally high and I must be using some tools to somehow make it go faster than it's supposed to and this messes up my modem. I check the connection with another computer and it seems that my PC is the only one in my network that gets abnormal speeds. I reinstall my OS, speed looks normal at first, after I install the batch of 50 or so updates, it goes back to abnormally high speeds and the disconnect problems are not solved. Now I don't have a clue if the explanation the tech team gave me was just a strategy to lay the blame on someone else, but I was trying to give them the benefit of the doubt and see what happens if I really reduce my speed to their specification. Any help appreciated.

  Read the article

• Puzzling TCP performance over 3G / UMTS

  - by lemonsqueeze

  I'm using 3G as my primary internet connection, and TCP over this thing is getting more puzzling every day. For example: Downloading from kernel.org is crazy fast: $wget http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.6.8.tar.bz2 increases to ~500kB/s after a few secs ! Some servers are incredibly slow, for instance www.graphic-pc.com:Same thing, downloading a big file with wget it starts at ~30kB/s for a split second, then collapses to 5-10k or even worse. Web browsing is decent but somewhat unreliable. Randomly, a page will take really long to load or even fail to load, but a reload can succeed almost immediately. Now, by chance i started playing with OpenVPN over UDP on top of the 3G connection, and OMG suddenly everything's extremely fast !Same www.graphic-pc.com now shoots at 100-200kB/s ! What's going on here ??? How come it is so much better with the VPN than without ?? And why does graphic-pc.com crawl when kernel.org flies ?Something to do with my tcp stack (or the server), or some buggy router in between ?? Notes: Setup is laptop running Ubuntu Lucid and a Huawei 3G dongle (So direct pppd connection). I can reproduce this pretty much any time during the day and I'm not moving, so it's clearly not cell environment or internet congestion. (although kernel.org without VPN sometimes does worse in the evening, 60kB or so - but still 500kB with VPN !) For 2) wireshark shows retransmitted packets, dup ack's, even out of order sometimes. I've tried playing with different /proc/sys/net/ipv4 parameters (tcp_rmem, window_scaling, tcp_congestion...) doesn't seem to make a difference. Update: Tried under windows 7 (no VPN) with some interesting results: tcp settings : default tcp_optimizer kernel.org : 10 kB/s 20 kB/s graphic-pc.com: 8 kB/s 70 kB/s ! tcp_optimizer turned on ctcp among other things. Have to check what os graphic-pc.com is running, my bet is linux's tcp_westwood and ms ctcp don't mix well here...

  Read the article

• very slow internet with Linksys WRT54GL only in wireless mode (wired is OK)

  - by gojira

  I bought a new Cisco Linksys WRT54GL router to connect my laptop (running Windows 7) to the internet. I installed Tomato 1.28 firmware on the router. When I connect the laptop to the router via ethernet cable, everything is fine and I get extremely fast up- and download speeds. When I connect wirelesssly however, websites load extremely slow - it takes dozens of seconds to load a website! <-- This is my question, how can I fix the wireless speed issue? Gmail for example is unusable this way. I tried speedtest.net, but this always fails in the upload part of the test so I can't even test the bandwidth (could the fact that it fails in the upload part, not the download part, be an indication what the problem is?!). I have isolated the problem a bit, I am convinced it has to do either with the router itself, the router settings, or the settings of the wireless connection in Win 7. Because previously, I was using another router by Buffalo and I had no problems whatsoever. I have tried to reproduce the settings from the Bufallo router as closely as possible on the Linksys router (same channel, same encryption etc). The download speed problem only occurs with the Linksys router, and only in wireless mode! When I exchange the Linksys router with the Buffalo router I have here for testing, the wireless speed is up to normal again. Also, before I had installed the Tomato firmware I had exactly the same problem, so it has nothing to do with the firmware itself. Notes & things I already tried: Changing the channel: does not seem to affect anything, I am also on the same channel (10) which I was previously on when I had a Buffalo router. QoS is off. Ping to the router itself is OK, ~ 1 ms. Some current settings of the linksys router: WAN / Internet Type: DHCP Wirelesss Mode: Access Point B/G Mode: Mixed Broadcast: check Channel: 10 - 2.457 GHz Security: WPA2 Personal Encryption: AES

  Read the article

• Postfix additional transports - is it working?

  - by threecheeseopera

  I have enabled two additional transports in my postfix config to deal with recipient domains that demand connection limiting, per the instructions here at serverfault. However, I have no idea if this is working or not; in fact, I think it is not working, due to the send speeds I am seeing in the logs. How might I determine if my additional transports are working? If they aren't, do you have any tips on figuring out why? And, do you have any comments on my particular configuration? (am I a bucket of fail?) I have enabled the additional transports in master.cf: smtp inet n - - - - smtpd careful unix - - n - 10 smtp -o smtp_connect_timeout=5 -o smtp_helo_timeout=5 cautious unix - - n - - smtp -o smtp_connect_timeout=5 -o smtp_helo_timeout=5 I have set up the transport mapping file /etc/postfix/transport: hotmail.com cautious: yahoo.com careful: gmail.com cautious: earthlink.net cautious: msn.com cautious: live.com cautious: aol.com careful: I have set up the transport mapping and some connection-limiting settings in main.cf: transport_maps = hash:/etc/postfix/transport careful_initial_destination_concurrency = 5 careful_destination_concurrency_limit = 10 cautious_destination_concurrency_limit = 50 Finally, I have run converted the transport file to a db per the postfix docs: #> postmap /etc/postfix/transport And then restarted postfix. I do see my transport_maps setting when I run postconf, but I do not see any of the transport-specific settings ('careful_xxx_yyy_zzz'). Also the mail logs do not appear to be different in any way to what they were previously. Thanks!!!

  Read the article

• ApplicationPoolIdentity IIS 7.5 to SQL Server 2008 R2 not working.

  - by Jack

  I have a small ASP.NET test script that opens a connection to a SQL Server database on another machine in the domain. It isn't working in all cases. Setup: IIS 7.5 under W2K8R2 trying to connect to a remote SQL Server 2008 R2 instance. All machines are in the same domain. Using the ApplicationPoolIdentity for the web site it fails to connect to the SQL Server with the following: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. However if I switch the Process Model Identity to NETWORK SERVICE or my domain account the database connection is successful. I've granted the \$ access in SQL Server. I am not doing any sort of authentication on the web site, it is just a simple script to open a connection to a database to make sure it works. I have Anonymous Authentication enabled and set to use the Application pool identity. How do I make this work? Why is the ApplicationPoolIdentity trying to use ANONYMOUS LOGON? Better yet, how do I make it stop using the Anonymous logon?

  Read the article

• C# sends SQL data 4 times less from one box than from another

  - by Bobb

  W2003, .NET 3.5, SQL 2008 I have prod and UAT app servers deployed in 2 different data centres. I have a C# app which reads text file, parse the text and sends the data to the SQL in bulk. SQL server is in US and the app servers are in London (but in different places). All POPs have dedicated network connections. There is no public internet involved. When the app runs on UAT server I can see in Perfmon that the Send byte/sec is x4 higher than from production server. My estimate is that one server outputs at 1 MB/s and the other at 250 KB/s rate. My suspicion immediately is that there is a router on one of the DCs which shapes traffic or does QoS limitation on traffice from London to US. However support and Windows team and networkig team all are saying that there are no differences in neither networking config on the 2 DCs nor NIC config on the 2 app server... How to find out why is the networking bottlneck is 4 times tighter in one place than in the other? What can I do about it?

  Read the article

• Windows/IIS Hosting :: How much is too much?

  - by bsisupport

  I have 4 Windows 2003 servers running IIS 6. These servers host a bunch of unique web sites (in that they are all different in build/architecture/etc). The code behind these sites range from straight HTML, classic ASP, and 1.1/2.0/3.x flavors of .NET. Some (most) of the sites use a SQL backend, which is hosted on one or two different servers – not the IIS servers themselves. No virtualization on these servers and no load balancing for these particular sites. The problem I’m running into is coming up with some baseline metrics to determine, or basically come up with a “baseline score” to know when a web server has reached its hosting limit. Today, some basic information about each server is used: how much bandwidth does the server pump out, hard drive space availability, and basic (very basic) RAM & CPU utilization (what it looks like at peak traffic times.) I would be grateful if those of you that are 1000x smarter than I am could indulge me with your methods of managing IIS environments. Whether performance monitoring specifics, “score” determination as I’m trying to determine, or the obvious combination of both. Thanks in advance.

  Read the article

• Implementing emailing (bulk & event based) features for my website.

  - by Kabeer

  Hello. For my upcoming social networking website, I am looking for suggestions on the best way to implement emailing. Here are some of my requirements and constraints: Requirements: - Should be able to send emails based on events (new registrations, change password, etc.), promotions (advertisements based on user consent), bulk mails (newsletters), reminders (profile updates), etc. I hope I got the point through. - Should be able to process faults (incorrect email address, mail-box full, etc) - User initiated invites (inviting friends to connect) Constraints: - As of now I am looking at Godaddy for hosting. Subsequently I shall move to, may be Amazon Cloud. Godaddy seems to be excruciatingly conservative (not bad always) when it comes to the ability to send email. - My tests on Godaddy so far have been discouraging. There is limit to no. of emails I can send and sometimes if emails carries special characters it throws strange exceptions like there was a virus affected attachment (even though I hadn't attached a thing). The replies from Godaddy support have been equally funny. My intent is not to portray Godaddy as wrong but I am looking for a work-around that frees me from said constraints. I am looking for a mechanism / service that is either free of very cost effective. I wonder how other sites address this. Mine is a .Net / Windows based application.

  Read the article

• How to stop NAT dropping idle connections?

  - by WGH

  I have a TCP connection that can be idle for many hours. The traffic is flowing from the server to the client only. One might say it's kind of push notification. My home router, however, tends to drop the connection silently after 20 minutes (the value of /proc/sys/net/netfilter/nf_conntrack_tcp_timeout_established). The server detects the loss once it tries to send anything (I assume it receives RST from the router itself). As client never sends anything, it never detects the loss. RFC 5382 "NAT Behavioral Requirements for TCP" states the following: A NAT can check if an endpoint for a session has crashed by sending a TCP keep-alive packet and receiving a TCP RST packet in response. It makes sense. It's much more effective than sending keep-alives by the host itself (as only NAT knows its own timeout). And probably not hard to implement. Is there any NAT solutions implementing this? It would be great if there was a way to enable this in iptables.

  Read the article

• samba access from win98

  - by SimonSalman

  Hello, the admin installed a new file server in our institute: OpenSuse 11.1 with Samba 3.2.7-11.3.2-2154-SUSE-CODE11. They copied the smb.conf from the old machine (hosting Samba 3.0.0) to the new one. Everything works as before, but one Windows 98 machine can see but not access the file server. It prompts for user authentication, but will not accept any user-password combination. There exists a lot of discussion about the problem on the net, but none provided a clear answer to the problem. EDIT: 1. I changed Win98 registry enable plain-text passwords, and alternatively changed server's smb.conf and /etc/smbpasswd to accept encrypted passwords 2. Further I provide a profile with a user-password combination on Win98 machine similar to one of the samba users-password combinations. 3. I changed smb.conf such that the samba server is the Local Master Browser all these changes are not necessary when using the older samba server. So, I conclude that a configuration problem on the server side is likely. If you need any further information, I will post them here. Best regards, Simon

  Read the article

< Previous Page | 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062  | Next Page >