Search Results

Search found 5413 results on 217 pages for 'git pull'.

Page 207/217 | < Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214 | Next Page >

Windows 8.1 Will Start Encrypting Hard Drives By Default: Everything You Need to Know

- by Chris Hoffman

Windows 8.1 will automatically encrypt the storage on modern Windows PCs. This will help protect your files in case someone steals your laptop and tries to get at them, but it has important ramifications for data recovery. Previously, “BitLocker” was available on Professional and Enterprise editions of Windows, while “Device Encryption” was available on Windows RT and Windows Phone. Device encryption is included with all editions of Windows 8.1 — and it’s on by default. When Your Hard Drive Will Be Encrypted Windows 8.1 includes “Pervasive Device Encryption.” This works a bit differently from the standard BitLocker feature that has been included in Professional, Enterprise, and Ultimate editions of Windows for the past few versions. Before Windows 8.1 automatically enables Device Encryption, the following must be true: The Windows device “must support connected standby and meet the Windows Hardware Certification Kit (HCK) requirements for TPM and SecureBoot on ConnectedStandby systems.” (Source) Older Windows PCs won’t support this feature, while new Windows 8.1 devices you pick up will have this feature enabled by default. When Windows 8.1 installs cleanly and the computer is prepared, device encryption is “initialized” on the system drive and other internal drives. Windows uses a clear key at this point, which is removed later when the recovery key is successfully backed up. The PC’s user must log in with a Microsoft account with administrator privileges or join the PC to a domain. If a Microsoft account is used, a recovery key will be backed up to Microsoft’s servers and encryption will be enabled. If a domain account is used, a recovery key will be backed up to Active Directory Domain Services and encryption will be enabled. If you have an older Windows computer that you’ve upgraded to Windows 8.1, it may not support Device Encryption. If you log in with a local user account, Device Encryption won’t be enabled. If you upgrade your Windows 8 device to Windows 8.1, you’ll need to enable device encryption, as it’s off by default when upgrading. Recovering An Encrypted Hard Drive Device encryption means that a thief can’t just pick up your laptop, insert a Linux live CD or Windows installer disc, and boot the alternate operating system to view your files without knowing your Windows password. It means that no one can just pull the hard drive from your device, connect the hard drive to another computer, and view the files. We’ve previously explained that your Windows password doesn’t actually secure your files. With Windows 8.1, average Windows users will finally be protected with encryption by default. However, there’s a problem — if you forget your password and are unable to log in, you’d also be unable to recover your files. This is likely why encryption is only enabled when a user logs in with a Microsoft account (or connects to a domain). Microsoft holds a recovery key, so you can gain access to your files by going through a recovery process. As long as you’re able to authenticate using your Microsoft account credentials — for example, by receiving an SMS message on the cell phone number connected to your Microsoft account — you’ll be able to recover your encrypted data. With Windows 8.1, it’s more important than ever to configure your Microsoft account’s security settings and recovery methods so you’ll be able to recover your files if you ever get locked out of your Microsoft account. Microsoft does hold the recovery key and would be capable of providing it to law enforcement if it was requested, which is certainly a legitimate concern in the age of PRISM. However, this encryption still provides protection from thieves picking up your hard drive and digging through your personal or business files. If you’re worried about a government or a determined thief who’s capable of gaining access to your Microsoft account, you’ll want to encrypt your hard drive with software that doesn’t upload a copy of your recovery key to the Internet, such as TrueCrypt. How to Disable Device Encryption There should be no real reason to disable device encryption. If nothing else, it’s a useful feature that will hopefully protect sensitive data in the real world where people — and even businesses — don’t enable encryption on their own. As encryption is only enabled on devices with the appropriate hardware and will be enabled by default, Microsoft has hopefully ensured that users won’t see noticeable slow-downs in performance. Encryption adds some overhead, but the overhead can hopefully be handled by dedicated hardware. If you’d like to enable a different encryption solution or just disable encryption entirely, you can control this yourself. To do so, open the PC settings app — swipe in from the right edge of the screen or press Windows Key + C, click the Settings icon, and select Change PC settings. Navigate to PC and devices -> PC info. At the bottom of the PC info pane, you’ll see a Device Encryption section. Select Turn Off if you want to disable device encryption, or select Turn On if you want to enable it — users upgrading from Windows 8 will have to enable it manually in this way. Note that Device Encryption can’t be disabled on Windows RT devices, such as Microsoft’s Surface RT and Surface 2. If you don’t see the Device Encryption section in this window, you’re likely using an older device that doesn’t meet the requirements and thus doesn’t support Device Encryption. For example, our Windows 8.1 virtual machine doesn’t offer Device Encryption configuration options. This is the new normal for Windows PCs, tablets, and devices in general. Where files on typical PCs were once ripe for easy access by thieves, Windows PCs are now encrypted by default and recovery keys are sent to Microsoft’s servers for safe keeping. This last part may be a bit creepy, but it’s easy to imagine average users forgetting their passwords — they’d be very upset if they lost all their files because they had to reset their passwords. It’s also an improvement over Windows PCs being completely unprotected by default.

Read the article
How To Remove People and Objects From Photographs In Photoshop

- by Eric Z Goodnight

You might think that it’s a complicated process to remove objects from photographs. But really Photoshop makes it quite simple, even when removing all traces of a person from digital photographs. Read on to see just how easy it is. Photoshop was originally created to be an image editing program, and it excels at it. With hardly any Photoshop experience, any beginner can begin removing objects or people from their photos. Have some friends that photobombed an otherwise great pic? Tell them to say their farewells, because here’s how to get rid of them with Photoshop! Tools for Removing Objects Removing an object is not really “magical” work. Your goal is basically to cover up the information you don’t want in an image with information you do want. In this sample image, we want to remove the cigar smoking man, and leave the geisha. Here’s a couple of the tools that can be useful to work with when attempting this kind of task. Clone Stamp and Pattern Stamp Tool: Samples parts of your image from your background, and allows you to paint into your image with your mouse or stylus. Eraser and Brush Tools: Paint flat colors and shapes, and erase cloned layers of image information. Basic, down and dirty photo editing tools. Pen, Quick Selection, Lasso, and Crop tools: Select, isolate, and remove parts of your image with these selection tools. All useful in their own way. Some, like the pen tool, are nightmarishly tough on beginners. Remove a Person with the Clone Stamp Tool (Video) The video above uses the Clone Stamp tool to sample and paint with the background texture. It’s a simple tool to use, although it can be confusing, possibly counter-intuitive. Here’s some pointers, in addition to the video above. Select shortcut key to choose the Clone tool stamp from the Tools Panel. Always create a copy of your background layer before doing heavy edits by right clicking on the background in your Layers Panel and selecting “Duplicate.” Hold with the Clone Tool selected, and click anywhere in your image to sample that area. When you’re sampling an area, your cursor is “Aligned” with your sample area. When you paint, your sample area moves. You can turn the “Aligned” setting off by clicking the in the Options Panel at the top of your screen if you want. Change your brush size and hardness as shown in the video by right-clicking in your image. Use your lasso to copy and paste pieces of your image in order to cover up any parts that seem appropriate. Photoshop Magic with the “Content-Aware Fill” One of the hallmark features of CS5 is the “Content-Aware Fill.” Content aware fill can be an excellent shortcut to removing objects and even people in Photoshop, but it is somewhat limited, and can get confused. Here’s a basic rundown on how it works. Select an object using your Lasso tool, shortcut key . The Lasso works fine as this selection can be rough. Navigate to Edit > Fill, and select “Content-Aware,” as illustrated above, from the pull-down menu. It’s surprisingly simple. After some processing, Photoshop has done the work of removing the object for you. It takes a few moments, and it is not perfect, so be prepared to touch it up with some Copy-Paste, or some Clone stamp action. Content Aware Fill Has Its Limits Keep in mind that the Content Aware Fill is meant to be used with other techniques in mind. It doesn’t always perform perfectly, but can give you a great starting point. Take this image for instance. It is actually plausible to hide this figure and make this image look like he was never there at all. With a selection made with the Lasso tool, navigate to Edit > Fill and select “Content Aware” again. The result is surprisingly good, but as you can see, worthy of some touch up. With a result like this one, you’ll have to get your hands dirty with copy-paste to create believable lines in the background. With many photographs, Content Aware Fill will simply get confused and give you results you won’t be happy with. Additional Touch Up for Bad Background Textures with the Pattern Stamp Tool For the perfectionist, cleaning up the lumpy looking textures that the Clone Stamp can leave is fairly simple using the Pattern Stamp Tool. Sample an piece of your image with your Marquee Tool, shortcut key . Navigate to Edit > Define Pattern to create a new Pattern from your selection. Click OK to continue. Click and hold down on the Clone Stamp tool in your Tools Panel until you can select the Pattern Stamp Tool. Pick your new pattern from the Options at the top of your screen, in the Options Panel. Then simply right click in your image in order to pick as soft a brush as possible to paint with. Paint into your image until your background is as smooth as you want it to be, making your painted out object more and more invisible. If you get lines from your repeated texture, experiment turning the on and off and paint over them. In addition to this, simple use of the Crop Tool, shortcut , can recompose an image, making it look as if it never had another object in it at all. Combine these techniques to find a method that works best for your images. Have questions or comments concerning Graphics, Photos, Filetypes, or Photoshop? Send your questions to [email protected], and they may be featured in a future How-To Geek Graphics article. Image Credits: Geisha Kyoto Gion by Todd Laracuenta via Wikipedia, used under Creative Commons. Moai Rano raraku by Aurbina, in Public Domain. Chris Young visits Wrigley by TonyTheTiger, via Wikipedia, used under Creative Commons. Latest Features How-To Geek ETC Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide CyanogenMod Updates; Rolls out Android 2.3 to the Less Fortunate MyPaint is an Open-Source Graphics App for Digital Painters Can the Birds and Pigs Really Be Friends in the End? [Angry Birds Video] Add the 2D Version of the New Unity Interface to Ubuntu 10.10 and 11.04 MightyMintyBoost Is a 3-in-1 Gadget Charger Watson Ties Against Human Jeopardy Opponents

Read the article
Replication Services as ETL extraction tool

- by jorg

In my last blog post I explained the principles of Replication Services and the possibilities it offers in a BI environment. One of the possibilities I described was the use of snapshot replication as an ETL extraction tool: “Snapshot Replication can also be useful in BI environments, if you don’t need a near real-time copy of the database, you can choose to use this form of replication. Next to an alternative for Transactional Replication it can be used to stage data so it can be transformed and moved into the data warehousing environment afterwards. In many solutions I have seen developers create multiple SSIS packages that simply copies data from one or more source systems to a staging database that figures as source for the ETL process. The creation of these packages takes a lot of (boring) time, while Replication Services can do the same in minutes. It is possible to filter out columns and/or records and it can even apply schema changes automatically so I think it offers enough features here. I don’t know how the performance will be and if it really works as good for this purpose as I expect, but I want to try this out soon!” Well I have tried it out and I must say it worked well. I was able to let replication services do work in a fraction of the time it would cost me to do the same in SSIS. What I did was the following: Configure snapshot replication for some Adventure Works tables, this was quite simple and straightforward. Create an SSIS package that executes the snapshot replication on demand and waits for its completion. This is something that you can’t do with out of the box functionality. While configuring the snapshot replication two SQL Agent Jobs are created, one for the creation of the snapshot and one for the distribution of the snapshot. Unfortunately these jobs are asynchronous which means that if you execute them they immediately report back if the job started successfully or not, they do not wait for completion and report its result afterwards. So I had to create an SSIS package that executes the jobs and waits for their completion before the rest of the ETL process continues. Fortunately I was able to create the SSIS package with the desired functionality. I have made a step-by-step guide that will help you configure the snapshot replication and I have uploaded the SSIS package you need to execute it. Configure snapshot replication The first step is to create a publication on the database you want to replicate. Connect to SQL Server Management Studio and right-click Replication, choose for New.. Publication… The New Publication Wizard appears, click Next Choose your “source” database and click Next Choose Snapshot publication and click Next You can now select tables and other objects that you want to publish Expand Tables and select the tables that are needed in your ETL process In the next screen you can add filters on the selected tables which can be very useful. Think about selecting only the last x days of data for example. Its possible to filter out rows and/or columns. In this example I did not apply any filters. Schedule the Snapshot Agent to run at a desired time, by doing this a SQL Agent Job is created which we need to execute from a SSIS package later on. Next you need to set the Security Settings for the Snapshot Agent. Click on the Security Settings button. In this example I ran the Agent under the SQL Server Agent service account. This is not recommended as a security best practice. Fortunately there is an excellent article on TechNet which tells you exactly how to set up the security for replication services. Read it here and make sure you follow the guidelines! On the next screen choose to create the publication at the end of the wizard Give the publication a name (SnapshotTest) and complete the wizard The publication is created and the articles (tables in this case) are added Now the publication is created successfully its time to create a new subscription for this publication. Expand the Replication folder in SSMS and right click Local Subscriptions, choose New Subscriptions The New Subscription Wizard appears Select the publisher on which you just created your publication and select the database and publication (SnapshotTest) You can now choose where the Distribution Agent should run. If it runs at the distributor (push subscriptions) it causes extra processing overhead. If you use a separate server for your ETL process and databases choose to run each agent at its subscriber (pull subscriptions) to reduce the processing overhead at the distributor. Of course we need a database for the subscription and fortunately the Wizard can create it for you. Choose for New database Give the database the desired name, set the desired options and click OK You can now add multiple SQL Server Subscribers which is not necessary in this case but can be very useful. You now need to set the security settings for the Distribution Agent. Click on the …. button Again, in this example I ran the Agent under the SQL Server Agent service account. Read the security best practices here Click Next Make sure you create a synchronization job schedule again. This job is also necessary in the SSIS package later on. Initialize the subscription at first synchronization Select the first box to create the subscription when finishing this wizard Complete the wizard by clicking Finish The subscription will be created In SSMS you see a new database is created, the subscriber. There are no tables or other objects in the database available yet because the replication jobs did not ran yet. Now expand the SQL Server Agent, go to Jobs and search for the job that creates the snapshot: Rename this job to “CreateSnapshot” Now search for the job that distributes the snapshot: Rename this job to “DistributeSnapshot” Create an SSIS package that executes the snapshot replication We now need an SSIS package that will take care of the execution of both jobs. The CreateSnapshot job needs to execute and finish before the DistributeSnapshot job runs. After the DistributeSnapshot job has started the package needs to wait until its finished before the package execution finishes. The Execute SQL Server Agent Job Task is designed to execute SQL Agent Jobs from SSIS. Unfortunately this SSIS task only executes the job and reports back if the job started succesfully or not, it does not report if the job actually completed with success or failure. This is because these jobs are asynchronous. The SSIS package I’ve created does the following: It runs the CreateSnapshot job It checks every 5 seconds if the job is completed with a for loop When the CreateSnapshot job is completed it starts the DistributeSnapshot job And again it waits until the snapshot is delivered before the package will finish successfully Quite simple and the package is ready to use as standalone extract mechanism. After executing the package the replicated tables are added to the subscriber database and are filled with data: Download the SSIS package here (SSIS 2008) Conclusion In this example I only replicated 5 tables, I could create a SSIS package that does the same in approximately the same amount of time. But if I replicated all the 70+ AdventureWorks tables I would save a lot of time and boring work! With replication services you also benefit from the feature that schema changes are applied automatically which means your entire extract phase wont break. Because a snapshot is created using the bcp utility (bulk copy) it’s also quite fast, so the performance will be quite good. Disadvantages of using snapshot replication as extraction tool is the limitation on source systems. You can only choose SQL Server or Oracle databases to act as a publisher. So if you plan to build an extract phase for your ETL process that will invoke a lot of tables think about replication services, it would save you a lot of time and thanks to the Extract SSIS package I’ve created you can perfectly fit it in your usual SSIS ETL process.

Read the article
Java EE 6 and NoSQL/MongoDB on GlassFish using JPA and EclipseLink 2.4 (TOTD #175)

- by arungupta

TOTD #166 explained how to use MongoDB in your Java EE 6 applications. The code in that tip used the APIs exposed by the MongoDB Java driver and so requires you to learn a new API. However if you are building Java EE 6 applications then you are already familiar with Java Persistence API (JPA). Eclipse Link 2.4, scheduled to release as part of Eclipse Juno, provides support for NoSQL databases by mapping a JPA entity to a document. Their wiki provides complete explanation of how the mapping is done. This Tip Of The Day (TOTD) will show how you can leverage that support in your Java EE 6 applications deployed on GlassFish 3.1.2. Before we dig into the code, here are the key concepts ... A POJO is mapped to a NoSQL data source using @NoSQL or <no-sql> element in "persistence.xml". A subset of JPQL and Criteria query are supported, based upon the underlying data store Connection properties are defined in "persistence.xml" Now, lets lets take a look at the code ... Download the latest EclipseLink 2.4 Nightly Bundle. There is a Installer, Source, and Bundle - make sure to download the Bundle link (20120410) and unzip. Download GlassFish 3.1.2 zip and unzip. Install the Eclipse Link 2.4 JARs in GlassFish Remove the following JARs from "glassfish/modules": org.eclipse.persistence.antlr.jar org.eclipse.persistence.asm.jar org.eclipse.persistence.core.jar org.eclipse.persistence.jpa.jar org.eclipse.persistence.jpa.modelgen.jar org.eclipse.persistence.moxy.jar org.eclipse.persistence.oracle.jar Add the following JARs from Eclipse Link 2.4 nightly build to "glassfish/modules": org.eclipse.persistence.antlr_3.2.0.v201107111232.jar org.eclipse.persistence.asm_3.3.1.v201107111215.jar org.eclipse.persistence.core.jpql_2.4.0.v20120407-r11132.jar org.eclipse.persistence.core_2.4.0.v20120407-r11132.jar org.eclipse.persistence.jpa.jpql_2.0.0.v20120407-r11132.jar org.eclipse.persistence.jpa.modelgen_2.4.0.v20120407-r11132.jar org.eclipse.persistence.jpa_2.4.0.v20120407-r11132.jar org.eclipse.persistence.moxy_2.4.0.v20120407-r11132.jar org.eclipse.persistence.nosql_2.4.0.v20120407-r11132.jar org.eclipse.persistence.oracle_2.4.0.v20120407-r11132.jar Start MongoDB Download latest MongoDB from here (2.0.4 as of this writing). Create the default data directory for MongoDB as: sudo mkdir -p /data/db/sudo chown `id -u` /data/db Refer to Quickstart for more details. Start MongoDB as: arungup-mac:mongodb-osx-x86_64-2.0.4 <arungup> ->./bin/mongod./bin/mongod --help for help and startup optionsMon Apr 9 12:56:02 [initandlisten] MongoDB starting : pid=3124 port=27017 dbpath=/data/db/ 64-bit host=arungup-mac.localMon Apr 9 12:56:02 [initandlisten] db version v2.0.4, pdfile version 4.5Mon Apr 9 12:56:02 [initandlisten] git version: 329f3c47fe8136c03392c8f0e548506cb21f8ebfMon Apr 9 12:56:02 [initandlisten] build info: Darwin erh2.10gen.cc 9.8.0 Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386 i386 BOOST_LIB_VERSION=1_40Mon Apr 9 12:56:02 [initandlisten] options: {}Mon Apr 9 12:56:02 [initandlisten] journal dir=/data/db/journalMon Apr 9 12:56:02 [initandlisten] recover : no journal files present, no recovery neededMon Apr 9 12:56:02 [websvr] admin web console waiting for connections on port 28017Mon Apr 9 12:56:02 [initandlisten] waiting for connections on port 27017 Check out the JPA/NoSQL sample from SVN repository. The complete source code built in this TOTD can be downloaded here. Create Java EE 6 web app Create a Java EE 6 Maven web app as: mvn archetype:generate -DarchetypeGroupId=org.codehaus.mojo.archetypes -DarchetypeArtifactId=webapp-javaee6 -DgroupId=model -DartifactId=javaee-nosql -DarchetypeVersion=1.5 -DinteractiveMode=false Copy the model files from the checked out workspace to the generated project as: cd javaee-nosqlcp -r ~/code/workspaces/org.eclipse.persistence.example.jpa.nosql.mongo/src/model src/main/java Copy "persistence.xml" mkdir src/main/resources cp -r ~/code/workspaces/org.eclipse.persistence.example.jpa.nosql.mongo/src/META-INF ./src/main/resources Add the following dependencies: <dependency> <groupId>org.eclipse.persistence</groupId> <artifactId>org.eclipse.persistence.jpa</artifactId> <version>2.4.0-SNAPSHOT</version> <scope>provided</scope></dependency><dependency> <groupId>org.eclipse.persistence</groupId> <artifactId>org.eclipse.persistence.nosql</artifactId> <version>2.4.0-SNAPSHOT</version></dependency><dependency> <groupId>org.mongodb</groupId> <artifactId>mongo-java-driver</artifactId> <version>2.7.3</version></dependency> The first one is for the EclipseLink latest APIs, the second one is for EclipseLink/NoSQL support, and the last one is the MongoDB Java driver. And the following repository: <repositories> <repository> <id>EclipseLink Repo</id> <url>http://www.eclipse.org/downloads/download.php?r=1&nf=1&file=/rt/eclipselink/maven.repo</url> <snapshots> <enabled>true</enabled> </snapshots> </repository> </repositories> Copy the "Test.java" to the generated project: mkdir src/main/java/examplecp -r ~/code/workspaces/org.eclipse.persistence.example.jpa.nosql.mongo/src/example/Test.java ./src/main/java/example/ This file contains the source code to CRUD the JPA entity to MongoDB. This sample is explained in detail on EclipseLink wiki. Create a new Servlet in "example" directory as: package example;import java.io.IOException;import java.io.PrintWriter;import javax.servlet.ServletException;import javax.servlet.annotation.WebServlet;import javax.servlet.http.HttpServlet;import javax.servlet.http.HttpServletRequest;import javax.servlet.http.HttpServletResponse;/** * @author Arun Gupta */@WebServlet(name = "TestServlet", urlPatterns = {"/TestServlet"})public class TestServlet extends HttpServlet { protected void processRequest(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { response.setContentType("text/html;charset=UTF-8"); PrintWriter out = response.getWriter(); try { out.println("<html>"); out.println("<head>"); out.println("<title>Servlet TestServlet</title>"); out.println("</head>"); out.println("<body>"); out.println("<h1>Servlet TestServlet at " + request.getContextPath() + "</h1>"); try { Test.main(null); } catch (Exception ex) { ex.printStackTrace(); } out.println("</body>"); out.println("</html>"); } finally { out.close(); } } @Override protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { processRequest(request, response); } @Override protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { processRequest(request, response); }} Build the project and deploy it as: mvn clean packageglassfish3/bin/asadmin deploy --force=true target/javaee-nosql-1.0-SNAPSHOT.war Accessing http://localhost:8080/javaee-nosql/TestServlet shows the following messages in the server.log: connecting(EISLogin( platform=> MongoPlatform user name=> "" MongoConnectionSpec())) . . .Connected: User: Database: 2.7 Version: 2.7 . . .Executing MappedInteraction() spec => null properties => {mongo.collection=CUSTOMER, mongo.operation=INSERT} input => [DatabaseRecord( CUSTOMER._id => 4F848E2BDA0670307E2A8FA4 CUSTOMER.NAME => AMCE)]. . .Data access result: [{TOTALCOST=757.0, ORDERLINES=[{DESCRIPTION=table, LINENUMBER=1, COST=300.0}, {DESCRIPTION=balls, LINENUMBER=2, COST=5.0}, {DESCRIPTION=rackets, LINENUMBER=3, COST=15.0}, {DESCRIPTION=net, LINENUMBER=4, COST=2.0}, {DESCRIPTION=shipping, LINENUMBER=5, COST=80.0}, {DESCRIPTION=handling, LINENUMBER=6, COST=55.0},{DESCRIPTION=tax, LINENUMBER=7, COST=300.0}], SHIPPINGADDRESS=[{POSTALCODE=L5J1H7, PROVINCE=ON, COUNTRY=Canada, CITY=Ottawa,STREET=17 Jane St.}], VERSION=2, _id=4F848E2BDA0670307E2A8FA8,DESCRIPTION=Pingpong table, CUSTOMER__id=4F848E2BDA0670307E2A8FA7, BILLINGADDRESS=[{POSTALCODE=L5J1H8, PROVINCE=ON, COUNTRY=Canada, CITY=Ottawa, STREET=7 Bank St.}]}] You'll not see any output in the browser, just the output in the console. But the code can be easily modified to do so. Once again, the complete Maven project can be downloaded here. Do you want to try accessing relational and non-relational (aka NoSQL) databases in the same PU ?

Read the article
UppercuT – Custom Extensions Now With PowerShell and Ruby

- by Robz / Fervent Coder

Arguably, one of the most powerful features of UppercuT (UC) is the ability to extend any step of the build process with a pre, post, or replace hook. This customization is done in a separate location from the build so you can upgrade without wondering if you broke the build. There is a hook before each step of the build has run. There is a hook after. And back to power again, there is a replacement hook. If you don’t like what the step is doing and/or you want to replace it’s entire functionality, you just drop a custom replacement extension and UppercuT will perform the custom step instead. Up until recently all custom hooks had to be written in NAnt. Now they are a little sweeter because you no longer need to use NAnt to extend UC if you don’t want to. You can use PowerShell. Or Ruby. Let that sink in for a moment. You don’t have to even need to interact with NAnt at all now. Extension Points On the wiki, all of the extension points are shown. The basic idea is that you would put whatever customization you are doing in a separate folder named build.custom. Each step Let’s take a look at all we can customize: The start point is default.build. It calls build.custom/default.pre.build if it exists, then it runs build/default.build (normal tasks) OR build.custom/default.replace.build if it exists, and finally build.custom/default.post.build if it exists. Every step below runs with the same extension points but changes on the file name it is looking for. NOTE: If you include default.replace.build, nothing else will run because everything is called from default.build. * policyChecks.step * versionBuilder.step NOTE: If you include build.custom/versionBuilder.replace.step, the items below will not run. - svn.step, tfs.step, or git.step (the custom tasks for these need to go in build.custom/versioners) * generateBuildInfo.step * compile.step * environmentBuilder.step * analyze.step NOTE: If you include build.custom/analyze.replace.step, the items below will not run. - test.step (the custom tasks for this need to go in build.custom/analyzers) NOTE: If you include build.custom/analyzers/test.replace.step, the items below will not run. + mbunit2.step, gallio.step, or nunit.step (the custom tasks for these need to go in build.custom/analyzers) - ncover.step (the custom tasks for this need to go in build.custom/analyzers) - ndepend.step (the custom tasks for this need to go in build.custom/analyzers) - moma.step (the custom tasks for this need to go in build.custom/analyzers) * package.step NOTE: If you include build.custom/package.replace.step, the items below will not run. - deploymentBuilder.step Customize UppercuT Builds With PowerShell UppercuT can now be extended with PowerShell (PS). To customize any extension point with PS, just add .ps1 to the end of the file name and write your custom tasks in PowerShell. If you are not signing your scripts you will need to change a setting in the UppercuT.config file. This does impose a security risk, because this allows PS to now run any PS script. This setting stays that way on ANY machine that runs the build until manually changed by someone. I’m not responsible if you mess up your machine or anyone else’s by doing this. You’ve been warned. Now that you are fully aware of any security holes you may open and are okay with that, let’s move on. Let’s create a file called default.replace.build.ps1 in the build.custom folder. Open that file in notepad and let’s add this to it: write-host "hello - I'm a custom task written in Powershell!" Now, let’s run build.bat. You could get some PSake action going here. I won’t dive into that in this post though. Customize UppercuT Builds With Ruby If you want to customize any extension point with Ruby, just add .rb to the end of the file name and write your custom tasks in Ruby. Let’s write a custom ruby task for UC. If you were thinking it would be the same as the one we just wrote for PS, you’d be right! In the build.custom folder, lets create a file called default.replace.build.rb. Open that file in notepad and let’s put this in there: puts "I'm a custom ruby task!" Now, let’s run build.bat again. That’s chunky bacon. UppercuT and Albacore.NET Just for fun, I wanted to see if I could replace the compile.step with a Rake task. Not just any rake task, Albacore’s msbuild task. Albacore is a suite of rake tasks brought about by Derick Bailey to make building .NET with Rake easier. It has quite a bit of support with developers that are using Rake to build code. In my build.custom folder, I drop a compile.replace.step.rb. I also put in a separate file that will contain my Albacore rake task and I call that compile.rb. What are the contents of compile.replace.step.rb? rake = 'rake' arguments= '-f ' + Dir.pwd + '/../build.custom/compile.rb' #puts "Calling #{rake} " + arguments system("#{rake} " + arguments) Since the custom extensions call ruby, we have to shell back out and call rake. That’s what we are doing here. We also realize that ruby is called from the build folder, so we need to back out and dive into the build.custom folder to find the file that is technically next to us. What are the contents of compile.rb? require 'rubygems' require 'fileutils' require 'albacore' task :default => [:compile] puts "Using Ruby to compile UppercuT with Albacore Tasks" desc 'Compile the source' msbuild :compile do |msb| msb.properties = { :configuration => :Release, :outputpath => '../../build_output/UppercuT' } msb.targets [:clean, :build] msb.verbosity = "quiet" msb.path_to_command = 'c:/Windows/Microsoft.NET/Framework/v3.5/MSBuild.exe' msb.solution = '../uppercut.sln' end We are using the msbuild task here. We change the output path to the build_output/UppercuT folder. The output path has “../../” because this is based on every project. We could grab the current directory and then point the task specifically to a folder if we have projects that are at different levels. We want the verbosity to be quiet so we set that as well. So what kind of output do you get for this? Let’s run build.bat custom_tasks_replace: [echo] Running custom tasks instead of normal tasks if C:\code\uppercut\build\..\build.custom\compile.replace.step exists. [exec] (in C:/code/uppercut/build) [exec] Using Ruby to compile UppercuT with Albacore Tasks [exec] Microsoft (R) Build Engine Version 3.5.30729.4926 [exec] [Microsoft .NET Framework, Version 2.0.50727.4927] [exec] Copyright (C) Microsoft Corporation 2007. All rights reserved. If you think this is awesome, you’d be right! With this knowledge you shall build.

Read the article
Conversion of BizTalk Projects to Use the New WCF-SAP Adaptor

- by Geordie

We are in the process of upgrading our BizTalk Environment from BizTalk 2006 R2 to BizTalk 2010. The SAP adaptor in BizTalk 2010 is an all new and more powerful WCF-SAP adaptor. When my colleagues tested out the new adaptor they discovered that the format of the data extracted from SAP was not identical to the old adaptor. This is not a big deal if the structure of the messages from SAP is simple. In this case we were receiving the delivery and invoice iDocs. Both these structures are complex especially the delivery document. Over the past few years I have tweaked the delivery mapping to remove bugs from original mapping. The idea of redoing these maps did not appeal and due to the current work load was not even an option. I opted for a rather crude alternative of pulling in the iDoc in the new typed format and then adding a static map at the start of the orchestration to convert the data to the old schema. Note WCF-SAP data formats (on the binding tab of the configuration dialog box is the ‘RecieiveIdocFormat’ field): Typed: Returns a XML document with the hierarchy represented in XML and all fields being represented by XML tags. RFC: Returns an XML document with the hierarchy represented in XML but the iDoc lines in flat file format. String: This returns the iDoc in a format that is closest to the original flat file format but is still wrapped with some top level XML tags. The files also contained some strange characters at the end of each line. I started with the invoice document and it was quite straight forward to add the mapping but this is where my problems started. The orchestrations for these documents are dynamic and so require the identity of the partner to be able to correctly configure the orchestration. The partner identity is in the EDI_DC40 segment of the iDoc. In the old project the RECPRN node of the segment was promoted. The code to set a variable to the partner ID was now failing. After lot of head scratching I discovered the problem was due to the addition of Namespaces to the fields in the EDI_DC40 segment. To overcome this I needed to use an xPath query with a Namespace Manager. This had to be done in custom code. I now tried to repeat the process with the delivery document. Unfortunately when we tried to get sample typed data from SAP an exception was thrown. The adapter "WCF-SAP" raised an error message. Details "Microsoft.ServiceModel.Channels.Common.XmlReaderGenerationException: The segment or group definition E2EDKA1001 was not found in the IDoc metadata. The UniqueId of the IDoc type is: IDOCTYP/3/DESADV01/ZASNEXT1/640. For Receive operations, the SAP adapter does not support unreleased segments. Our guess is that when the WCF-SAP adaptor tries to down load the data it retrieves a data schema from SAP. For some reason the schema does not match the data. This may be due to the version of SAP we are running or due to a customization. Either way resolving this problem did not look easy. When doing some research on this problem I found an article showing me how to get the data from SAP using the WCF-SAP adaptor without any XML tags. http://blogs.msdn.com/b/adapters/archive/2007/10/05/receiving-idocs-getting-the-raw-idoc-data.aspx Reproduction of Mustansir blog: Since the WCF based SAP Adapter is ... well, WCF based, all data flowing in and out of the adapter is encapsulated within a SOAP message. Which means there are those pesky xml tags all over the place. If you want to receive an Idoc from SAP, you can receive it in "Typed" format (in which case each column in each segment of the idoc appears within its own xml tag), or you can receive it in "String" format (in which case there are just 2 xml tags at the top, the raw xml data in string/flat file format, and the 2 closing xml tags). In "String" format, an incoming idoc (for ORDERS05, containing 5 data records) would look like: <ReceiveIdoc ><idocData>EDI_DC40 8000000000001064985620 E2EDK01005 800000000000106498500000100000001 E2EDK14 8000000000001064985000002000000020111000 E2EDK14 8000000000001064985000003000000020081000 E2EDK14 80000000000010649850000040000000200710 E2EDK14 80000000000010649850000050000000200600</idocData></ReceiveIdoc> (I have trimmed part of the control record so that it fits cleanly here on one line). Now, you're only interested in the IDOC data, and don't care much for the XML tags. It isn't that difficult to write your own pipeline component, or even some logic in the orchestration to remove the tags, right? Well, you don't need to write any extra code at all - the WCF Adapter can help you here! During the configuration of your one-way Receive Location using WCF-Custom, navigate to the Messages tab. Under the section "Inbound BizTalk Messge Body", select the "Path" radio button, and: (a) Enter the body path expression as: /*[local-name()='ReceiveIdoc']/*[local-name()='idocData'] (b) Choose "String" for the Node Encoding. What we've done is, used an XPATH to pull out the value of the "idocData" node from the XML. Your Receive Location will now emit text containing only the idoc data. You can at this point, for example, put the Flat File Pipeline component to convert the flat text into a different xml format based on some other schema you already have, and receive your version of the xml formatted message in your orchestration. This was potentially a much easier solution than adding the static maps to the orchestrations and overcame the issue with ‘Typed’ delivery documents. Not quite so fast… Note: When I followed Mustansir’s blog the characters at the end of each line disappeared. After configuring the adaptor and passing the iDoc data into the original flat file receive pipelines I was receiving exceptions. There was a failure executing the receive pipeline: "PAPINETPipelines.DeliveryFlatFileReceive, CustomerIntegration2.PAPINET.Pipelines, Version=1.0.0.0, Culture=neutral, PublicKeyToken=4ca3635fbf092bbb" Source: "Pipeline " Receive Port: "recSAP_Delivery" URI: "D:\CustomerIntegration2\SAP\Delivery\*.xml" Reason: An error occurred when parsing the incoming document: "Unexpected data found while looking for: 'Z2EDPZ7' The current definition being parsed is E2EDP07GRP. The stream offset where the error occured is 8859. The line number where the error occured is 23. The column where the error occured is 0.". Although the new flat file looked the same as the old one there was a differences. In the original file all lines in the document were exactly 1064 character long. In the new file all lines were truncated to the last alphanumeric character. The final piece of the puzzle was to add a custom pipeline component to pad all the lines to 1064 characters. This component was added to the decode node of the custom delivery and invoice flat file disassembler pipelines. Execute method of the custom pipeline component: public IBaseMessage Execute(IPipelineContext pc, IBaseMessage inmsg) { //Convert Stream to a string Stream s = null; IBaseMessagePart bodyPart = inmsg.BodyPart; // NOTE inmsg.BodyPart.Data is implemented only as a setter in the http adapter API and a //getter and setter for the file adapter. Use GetOriginalDataStream to get data instead. if (bodyPart != null) s = bodyPart.GetOriginalDataStream(); string newMsg = string.Empty; string strLine; try { StreamReader sr = new StreamReader(s); strLine = sr.ReadLine(); while (strLine != null) { //Execute padding code if (strLine != null) strLine = strLine.PadRight(1064, ' ') + "\r\n"; newMsg += strLine; strLine = sr.ReadLine(); } sr.Close(); } catch (IOException ex) { throw new Exception("Error occured trying to pad the message to 1064 charactors"); } //Convert back to stream and set to Data property inmsg.BodyPart.Data = new MemoryStream(Encoding.UTF8.GetBytes(newMsg)); ; //reset the position of the stream to zero inmsg.BodyPart.Data.Position = 0; return inmsg; }

Read the article
Process.Start() and ShellExecute() fails with URLs on Windows 8

- by Rick Strahl

Since I installed Windows 8 I've noticed that a number of my applications appear to have problems opening URLs. That is when I click on a link inside of a Windows application, either nothing happens or there's an error that occurs. It's happening both to my own applications and a host of Windows applications I'm running. At first I thought this was an issue with my default browser (Chrome) but after switching the default browser to a few others and experimenting a bit I noticed that the errors occur - oddly enough - only when I run an application as an Administrator. I also tried switching to FireFox and Opera as my default browser and saw exactly the same behavior. The scenario for this is a bit bizarre: Running on Windows 8 Call Process.Start() (or ShellExecute() in Win32 API) with a URL or an HTML file Run 'As Administrator' (works fine under non-elevated user account!) or with UAC off A browser other than Internet Explorer is set as your Default Web Browser Talk about a weird scenario: Something that doesn't work when you run as an Administrator which is supposed to have rights to everything on the system! Instead running under an Admin account - either elevated with a User Account Control prompt or even when running as a full Administrator fails. It appears that this problem does not occur for everyone, but when I looked for a solution to this, I saw quite a few posts in relation to this with no clear resolutions. I have three Windows 8 machines running here in the office and all three of them showed this behavior. Lest you think this is just a programmer's problem - this can affect any software running on your system that needs to run under administrative rights. Try it out Now, in order for this next example to fail, any browser but Internet Explorer has to be your default browser and even then it may not fail depending on how you installed your browser. To see if this is a problem create a small Console application and call Process.Start() with a URL in it:namespace Win8ShellBugConsole { class Program { static void Main(string[] args) { Console.WriteLine("Launching Url..."); Process.Start("http://microsoft.com"); Console.Write("Press any key to continue..."); Console.ReadKey(); Console.WriteLine("\r\n\r\nLaunching image..."); Process.Start(Path.GetFullPath(@"..\..\sailbig.jpg")); Console.Write("Press any key to continue..."); Console.ReadKey(); } } } Compile this code. Then execute the code from Explorer (not from Visual Studio because that may change the permissions). If you simply run the EXE and you're not running as an administrator, you'll see the Web page pop up in the browser as well as the image loading. Now run the same thing with Run As Administrator: Now when you run it you get a nice error when Process.Start() is fired: The same happens if you are running with User Account Control off altogether - ie. you are running as a full admin account. Now if you comment out the URL in the code above and just fire the image display - that works just fine in any user mode. As does opening any other local file type or even starting a new EXE locally (ie. Process.Start("c:\windows\notepad.exe"). All that works, EXCEPT for URLs. The code above uses Process.Start() in .NET but the same happens in Win32 Applications that use the ShellExecute API. In some of my older Fox apps ShellExecute returns an error code of 31 - which is No Shell Association found. What's the Deal? It turns out the problem has to do with the way browsers are registering themselves on Windows. Internet Explorer - being a built-in application in Windows 8 - apparently does this correctly, but other browsers possibly don't or at least didn't at the time I installed them. So even Chrome, which continually updates itself, has a recent version that apparently has this registration issue fixed, I was unable to simply set IE as my default browser then use Chrome to 'Set as Default Browser'. It still didn't work. Neither did using the Set Program Associations dialog which lets you assign what extensions are mapped to by a given application. Each application provides a set of extension/moniker mappings that it supports and this dialog lets you associate them on a system wide basis. This also did not work for Chrome or any of the other browsers at first. However, after repeated retries here eventually I did manage to get FireFox to work, but not any of the others. What Works? Reinstall the Browser In the end I decided on the hard core pull the plug solution: Totally uninstall and re-install Chrome in this case. And lo and behold, after reinstall everything was working fine. Now even removing the association for Chrome, switching to IE as the default browser and then back to Chrome works. But, even though the version of Chrome I was running before uninstalling and reinstalling is the same as I'm running now after the reinstall now it works. Of course I had to find out the hard way, before Richard commented with a note regarding what the issue is with Chrome at least: http://code.google.com/p/chromium/issues/detail?id=156400 As expected the issue is a registration issue - with keys not being registered at the machine level. Reading this I'm still not sure why this should be a problem - an elevated account still runs under the same user account (ie. I'm still rickstrahl even if I Run As Administrator), so why shouldn't an app be able to read my Current User registry hive? And also that doesn't quite explain why if I register the extensions using Run As Administrator in Chrome when using Set as Default Browser). But in the end it works… Not so fast It's now a couple of days later and still there are some oddball problems although this time they appear to be purely Chrome issues. After the reinstall Chrome seems to pop up properly with ShellExecute() calls both in regular user and Admin mode. However, it now looks like Chrome is actually running two completely separate user profiles for each. For example, when I run Visual Studio in Admin mode and go to View in browser, Chrome complains that it was installed in Admin mode and can't launch (WTF?). Then you retry a few times later and it ends up working. When launched that way some of the plug-ins installed don't show up with the effect that sometimes they're visible sometimes they're not. Also Chrome seems to loose my configuration and Google sign in between sessions now, presumably when switching user modes. Add-ins installed in admin mode don't show up in user mode and vice versa. Ah, this is lovely. Did I mention that I freaking hate UAC precisely because of this kind of bullshit. You can never tell exactly what account your app is running under, and apparently apps also have a hard time trying to put data into the right place that works for both scenarios. And as my recent post on using Windows Live accounts shows it's yet another level of abstraction ontop of the underlying system identity that can cause all sort of small side effect headaches like this. Hopefully, most of you are skirting this issue altogether - having installed more recent versions of your favorite browsers. If not, hopefully this post will take you straight to reinstallation to fix this annoying issue.© Rick Strahl, West Wind Technologies, 2005-2012Posted in Windows .NET Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article
Granular Clipboard Control in Oracle IRM

- by martin.abrahams

One of the main leak prevention controls that customers are looking for is clipboard control. After all, there is little point in controlling access to a document if authorised users can simply make unprotected copies by use of the cut and paste mechanism. Oddly, for such a fundamental requirement, many solutions only offer very simplistic clipboard control - and require the customer to make an awkward choice between usability and security. In many cases, clipboard control is simply an ON-OFF option. By turning the clipboard OFF, you disable one of the most valuable edit functions known to man. Try working for any length of time without copying and pasting, and you'll soon appreciate how valuable that function is. Worse, some solutions disable the clipboard completely - not just for the protected document but for all of the various applications you have open at the time. Normal service is only resumed when you close the protected document. In this way, policy enforcement bleeds out of the particular assets you need to protect and interferes with the entire user experience. On the other hand, turning the clipboard ON satisfies a fundamental usability requirement - but also makes it really easy for users to create unprotected copies of sensitive information, maliciously or otherwise. All they need to do is paste into another document. If creating unprotected copies is this simple, you have to question how much you are really gaining by applying protection at all. You may not be allowed to edit, forward, or print the protected asset, but all you need to do is create a copy and work with that instead. And that activity would not be tracked in any way. So, a simple ON-OFF control creates a real tension between usability and security. If you are only using IRM on a small scale, perhaps security can outweigh usability - the business can put up with the restriction if it only applies to a handful of important documents. But try extending protection to large numbers of documents and large user communities, and the restriction rapidly becomes really unwelcome. I am aware of one solution that takes a different tack. Rather than disable the clipboard, pasting is always permitted, but protection is automatically applied to any document that you paste into. At first glance, this sounds great - protection travels with the content. However, at any scale this model may not be so appealing once you've had to deal with support calls from users who have accidentally applied protection to documents that really don't need it - which would be all too easily done. This may help control leakage, but it also pollutes the system with documents that have policies applied with no obvious rhyme or reason, and it can seriously inconvenience the business by making non-sensitive documents difficult to access. And what policy applies if you paste some protected content into an already protected document? Which policy applies? There are no prizes for guessing that Oracle IRM takes a rather different approach. The Oracle IRM Approach Oracle IRM offers a spectrum of clipboard controls between the extremes of ON and OFF, and it leverages the classification-based rights model to give granular control that satisfies both security and usability needs. Firstly, we take it for granted that if you have EDIT rights, of course you can use the clipboard within a given document. Why would we force you to retype a piece of content that you want to move from HERE... to HERE...? If the pasted content remains in the same document, it is equally well protected whether it be at the beginning, middle, or end - or all three. So, the first point is that Oracle IRM always enables the clipboard if you have the right to edit the file. Secondly, whether we enable or disable the clipboard, we only affect the protected document. That is, you can continue to use the clipboard in the usual way for unprotected documents and applications regardless of whether the clipboard is enabled or disabled for the protected document(s). And if you have multiple protected documents open, each may have the clipboard enabled or disabled independently, according to whether you have Edit rights for each. So, even for the simplest cases - the ON-OFF cases - Oracle IRM adds value by containing the effect to the protected documents rather than to the whole desktop environment. Now to the granular options between ON and OFF. Thanks to our classification model, we can define rights that enable pasting between documents in the same classification - ie. between documents that are protected by the same policy. So, if you are working on this month's financial report and you want to pull some data from last month's report, you can simply cut and paste between the two documents. The two documents are classified the same way, subject to the same policy, so the content is equally safe in both documents. However, if you try to paste the same data into an unprotected document or a document in a different classification, you can be prevented. Thus, the control balances legitimate user requirements to allow pasting with legitimate information security concerns to keep data protected. We can take this further. You may have the right to paste between related classifications of document. So, the CFO might want to copy some financial data into a board document, where the two documents are sealed to different classifications. The CFO's rights may well allow this, as it is a reasonable thing for a CFO to want to do. But policy might prevent the CFO from copying the same data into a classification that is accessible to external parties. The above option, to copy between classifications, may be for specific classifications or open-ended. That is, your rights might enable you to go from A to B but not to C, or you might be allowed to paste to any classification subject to your EDIT rights. As for so many features of Oracle IRM, our classification-based rights model makes this type of granular control really easy to manage - you simply define that pasting is permitted between classifications A and B, but omit C. Or you might define that pasting is permitted between all classifications, but not to unprotected locations. The classification model enables millions of documents to be controlled by a few such rules. Finally, you MIGHT have the option to paste anywhere - such that unprotected copies may be created. This is rare, but a legitimate configuration for some users, some use cases, and some classifications - but not something that you have to permit simply because the alternative is too restrictive. As always, these rights are defined in user roles - so different users are subject to different clipboard controls as required in different classifications. So, where most solutions offer just two clipboard options - ON-OFF or ON-but-encrypt-everything-you-touch - Oracle IRM offers real granularity that leverages our classification model. Indeed, I believe it is the lack of a classification model that makes such granularity impractical for other IRM solutions, because the matrix of rules for controlling pasting would be impossible to manage - there are so many documents to consider, and more are being created all the time.

Read the article
ubuntu 12.04 python problem or?

- by Trki

Hi i am trying to fix this for a long time but without success. When i open my zsh terminal i get this error: (terminal is working but error appear) Welcome to the world of tomorrow! virtualenvwrapper_run_hook:12: permission denied: virtualenvwrapper.sh: There was a problem running the initialization hooks. If Python could not import the module virtualenvwrapper.hook_loader, check that virtualenv has been installed for VIRTUALENVWRAPPER_PYTHON= and that PATH is set properly. I tried few things but... dont know how to solve it. Somehow during looking for a search i found i should post here an output of: ? sudo dpkg --configure -a Setting up python-pip (1.0-1build1) ... /var/lib/dpkg/info/python-pip.postinst: 6: /var/lib/dpkg/info/python-pip.postinst: pycompile: not found dpkg: error processing python-pip (--configure): subprocess installed post-installation script returned error exit status 127 Setting up libc-dev-bin (2.15-0ubuntu10.5) ... Setting up gnome-control-center-data (1:3.4.2-0ubuntu0.13) ... Setting up linux-libc-dev (3.2.0-56.86) ... Setting up python-virtualenv (1.7.1.2-1) ... /var/lib/dpkg/info/python-virtualenv.postinst: 6: /var/lib/dpkg/info/python-virtualenv.postinst: pycompile: not found dpkg: error processing python-virtualenv (--configure): subprocess installed post-installation script returned error exit status 127 Setting up libglib2.0-0 (2.32.4-0ubuntu1) ... Setting up libglib2.0-0:i386 (2.32.4-0ubuntu1) ... Setting up gimp (2.6.12-1ubuntu1.2) ... /var/lib/dpkg/info/gimp.postinst: 11: /var/lib/dpkg/info/gimp.postinst: pycompile: not found dpkg: error processing gimp (--configure): subprocess installed post-installation script returned error exit status 127 Setting up libpolkit-gobject-1-0 (0.104-1ubuntu1.1) ... Setting up libgnome-control-center1 (1:3.4.2-0ubuntu0.13) ... Setting up libnm-util2 (0.9.4.0-0ubuntu4.3) ... Setting up libc6-dev (2.15-0ubuntu10.5) ... Setting up libpulse-mainloop-glib0 (1:1.1-0ubuntu15.4) ... dpkg: dependency problems prevent configuration of virtualenvwrapper: virtualenvwrapper depends on python-virtualenv; however: Package python-virtualenv is not configured yet. dpkg: error processing virtualenvwrapper (--configure): dependency problems - leaving unconfigured Setting up libpolkit-agent-1-0 (0.104-1ubuntu1.1) ... Setting up libupower-glib1 (0.9.15-3git1ubuntu0.1) ... Setting up libaccountsservice0 (0.6.15-2ubuntu9.6.1) ... Setting up libpolkit-backend-1-0 (0.104-1ubuntu1.1) ... Setting up libglib2.0-bin (2.32.4-0ubuntu1) ... Setting up libnm-glib4 (0.9.4.0-0ubuntu4.3) ... Setting up policykit-1 (0.104-1ubuntu1.1) ... Setting up gnome-settings-daemon (3.4.2-0ubuntu0.6.4) ... Setting up accountsservice (0.6.15-2ubuntu9.6.1) ... dpkg: error processing ubuntu-system-service (--configure): Package is in a very bad inconsistent state - you should reinstall it before attempting configuration. Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: python-pip python-virtualenv gimp virtualenvwrapper ubuntu-system-service Also: ? python --version zsh: command not found: python Part of my ~/.zshrc # python virtual env wrapper if [ -f ~/.local/bin/virtualenvwrapper.sh ]; then export WORKON_HOME=~/.virtualenvs source ~/.local/bin/virtualenvwrapper.sh plugins=("${plugins[@]}" virtualenvwrapper) fi # pythonbrew [[ -s ~/.pythonbrew/etc/bashrc ]] && source ~/.pythonbrew/etc/bashrc Part os zsh -xv # # Invoke the initialization functions # virtualenvwrapper_initialize +/home/trki/.local/bin/virtualenvwrapper.sh:1179> virtualenvwrapper_initialize +virtualenvwrapper_initialize:1> virtualenvwrapper_derive_workon_home +virtualenvwrapper_derive_workon_home:1> typeset 'workon_home_dir=/home/trki/.virtualenvs' +virtualenvwrapper_derive_workon_home:5> [ /home/trki/.virtualenvs '=' '' ']' +virtualenvwrapper_derive_workon_home:12> echo /home/trki/.virtualenvs +virtualenvwrapper_derive_workon_home:12> unset GREP_OPTIONS +virtualenvwrapper_derive_workon_home:12> grep '^[^/~]' +virtualenvwrapper_derive_workon_home:21> echo /home/trki/.virtualenvs +virtualenvwrapper_derive_workon_home:21> unset GREP_OPTIONS +virtualenvwrapper_derive_workon_home:21> egrep '([\$~]|//)' +virtualenvwrapper_derive_workon_home:30> echo /home/trki/.virtualenvs +virtualenvwrapper_derive_workon_home:31> return 0 +virtualenvwrapper_initialize:1> export 'WORKON_HOME=/home/trki/.virtualenvs' +virtualenvwrapper_initialize:3> virtualenvwrapper_verify_workon_home -q +virtualenvwrapper_verify_workon_home:1> RC=0 +virtualenvwrapper_verify_workon_home:2> [ ! -d /home/trki/.virtualenvs/ ']' +virtualenvwrapper_verify_workon_home:11> return 0 +virtualenvwrapper_initialize:6> [ /home/trki/.virtualenvs '=' '' ']' +virtualenvwrapper_initialize:11> virtualenvwrapper_run_hook initialize +virtualenvwrapper_run_hook:1> typeset hook_script +virtualenvwrapper_run_hook:2> typeset result +virtualenvwrapper_run_hook:4> hook_script=+virtualenvwrapper_run_hook:4> virtualenvwrapper_tempfile initialize-hook +virtualenvwrapper_tempfile:2> typeset 'suffix=initialize-hook' +virtualenvwrapper_tempfile:3> typeset file +virtualenvwrapper_tempfile:5> file=+virtualenvwrapper_tempfile:5> virtualenvwrapper_mktemp -t virtualenvwrapper-initialize-hook-XXXXXXXXXX +virtualenvwrapper_mktemp:1> mktemp -t virtualenvwrapper-initialize-hook-XXXXXXXXXX +virtualenvwrapper_tempfile:5> file=/tmp/virtualenvwrapper-initialize-hook-OhY86PXmo7 +virtualenvwrapper_tempfile:6> [ 0 -ne 0 ']' +virtualenvwrapper_tempfile:6> [ -z /tmp/virtualenvwrapper-initialize-hook-OhY86PXmo7 ']' +virtualenvwrapper_tempfile:6> [ ! -f /tmp/virtualenvwrapper-initialize-hook-OhY86PXmo7 ']' +virtualenvwrapper_tempfile:11> echo /tmp/virtualenvwrapper-initialize-hook-OhY86PXmo7 +virtualenvwrapper_tempfile:12> return 0 +virtualenvwrapper_run_hook:4> hook_script=/tmp/virtualenvwrapper-initialize-hook-OhY86PXmo7 +virtualenvwrapper_run_hook:11> cd /home/trki/.virtualenvs +cd:1> [[ x/home/trki/.virtualenvs == x... ]] +cd:3> [[ x/home/trki/.virtualenvs == x.... ]] +cd:5> [[ x/home/trki/.virtualenvs == x..... ]] +cd:7> [[ x/home/trki/.virtualenvs == x...... ]] +cd:9> [ -d /home/trki/.autoenv ']' +cd:13> cd /home/trki/.virtualenvs +virtualenvwrapper_run_hook:12> '' -m virtualenvwrapper.hook_loader --script /tmp/virtualenvwrapper-initialize-hook-OhY86PXmo7 initialize virtualenvwrapper_run_hook:12: permission denied: +virtualenvwrapper_run_hook:15> result=126 +virtualenvwrapper_run_hook:17> [ 126 -eq 0 ']' +virtualenvwrapper_run_hook:27> [ initialize '=' initialize ']' +virtualenvwrapper_run_hook:29> cat - virtualenvwrapper.sh: There was a problem running the initialization hooks. If Python could not import the module virtualenvwrapper.hook_loader, check that virtualenv has been installed for VIRTUALENVWRAPPER_PYTHON= and that PATH is set properly. +virtualenvwrapper_run_hook:38> rm -f /tmp/virtualenvwrapper-initialize-hook-OhY86PXmo7 +virtualenvwrapper_run_hook:39> return 126 +virtualenvwrapper_initialize:13> virtualenvwrapper_setup_tab_completion +virtualenvwrapper_setup_tab_completion:1> [ -n '' ']' +virtualenvwrapper_setup_tab_completion:20> [ -n 4.3.17 ']' +virtualenvwrapper_setup_tab_completion:30> compctl -K _virtualenvs workon rmvirtualenv cpvirtualenv showvirtualenv +virtualenvwrapper_setup_tab_completion:31> compctl -K _cdvirtualenv_complete cdvirtualenv +virtualenvwrapper_setup_tab_completion:32> compctl -K _cdsitepackages_complete cdsitepackages +virtualenvwrapper_initialize:15> return 0 +/home/trki/.zshrc:17> plugins=( git python django symfony2 zsh-syntax-highlighting composer history-substring-search virtualenvwrapper ) # pythonbrew [[ -s ~/.pythonbrew/etc/bashrc ]] && source ~/.pythonbrew/etc/bashrc +/home/trki/.zshrc:21> [[ -s /home/trki/.pythonbrew/etc/bashrc ]] Also when i try to open ubuntu software center absolutly nothing happens. No idea what to do now.

Read the article
ASP.NET MVC JavaScript Routing

- by zowens

Have you ever done this sort of thing in your ASP.NET MVC view? The weird thing about this isn’t the alert function, it’s the code block containing the Url formation using the ASP.NET MVC UrlHelper. The terrible thing about this experience is the obvious lack of IntelliSense and this ugly inline JavaScript code. Inline JavaScript isn’t portable to other pages beyond the current page of execution. It is generally considered bad practice to use inline JavaScript in your public-facing pages. How ludicrous would it be to copy and paste the entire jQuery code base into your pages…? Not something you’d ever consider doing. The problem is that your URLs have to be generated by ASP.NET at runtime and really can’t be copied to your JavaScript code without some trickery. How about this? Does the hard-coded URL bother you? It really bothers me. The typical solution to this whole routing in JavaScript issue is to just hard-code your URLs into your JavaScript files and call it done. But what if your URLs change? You have to now go an track down the places in JavaScript and manually replace them. What if you get the pattern wrong? Do you have tests around it? This isn’t something you should have to worry about. The Solution To Our Problems The solution is to port routing over to JavaScript. Does that sound daunting to you? It’s actually not very hard, but I decided to create my own generator that will do all the work for you. What I have created is a very basic port of the route formation feature of ASP.NET routing. It will generate the formatted URLs based on your routing patterns. Here’s how you’d do this: Does that feel familiar? It looks a lot like something you’d do inside of your ASP.NET MVC views… but this is inside of a JavaScript file… just a plain ol’ .js file. Your first question might be why do you have to have that “.toUrl()” thing. The reason is that I wanted to make POST and GET requests dead simple. Here’s how you’d do a POST request (and the same would work with a GET request): The first parameter is extra data passed to the post request and the second parameter is a function that handles the success of the POST request. If you’re familiar with jQuery’s Ajax goodness, you’ll know how to use it. (if not, check out http://api.jquery.com/jQuery.Post/ and the parameters are essentially the same). But we still haven’t gotten rid of the magic strings. We still have controller names and action names represented as strings. This is going to blow your mind… If you’ve seen T4MVC, this will look familiar. We’re essentially doing the same sort of thing with my JavaScript router, but we’re porting the concept to JavaScript. The good news is that parameters to the controllers are directly reflected in the action function, just like T4MVC. And the even better news… IntlliSense is easily transferred to the JavaScript version if you’re using Visual Studio as your JavaScript editor. The additional data parameter gives you the ability to pass extra routing data to the URL formatter. About the Magic You may be wondering how this all work. It’s actually quite simple. I’ve built a simple jQuery pluggin (called routeManager) that hangs off the main jQuery namespace and routes all the URLs. Every time your solution builds, a routing file will be generated with this pluggin, all your route and controller definitions along with your documentation. Then by the power of Visual Studio, you get some really slick IntelliSense that is hard to live without. But there are a few steps you have to take before this whole thing is going to work. First and foremost, you need a reference to the JsRouting.Core.dll to your projects containing controllers or routes. Second, you have to specify your routes in a bit of a non-standard way. See, we can’t just pull routes out of your App_Start in your Global.asax. We force you to build a route source like this: The way we determine the routes is by pulling in all RouteSources and generating routes based upon the mapped routes. There are various reasons why we can’t use RouteCollection (different post for another day)… but in this case, you get the same route mapping experience. Converting the RouteSource to a RouteCollection is trivial (there’s an extension method for that). Next thing you have to do is generate a documentation XML file. This is done by going to the project settings, going to the build tab and clicking the checkbox. (this isn’t required, but nice to have). The final thing you need to do is hook up the generation mechanism. Pop open your project file and look for the AfterBuild step. Now change the build step task to look like this: The “PathToOutputExe” is the path to the JsRouting.Output.exe file. This will change based on where you put the EXE. The “PathToOutputJs” is a path to the output JavaScript file. The “DicrectoryOfAssemblies” is a path to the directory containing controller and routing DLLs. The JsRouting.Output.exe executable pulls in all these assemblies and scans them for controllers and route sources. Now that wasn’t too bad, was it :) The State of the Project This is definitely not complete… I have a lot of plans for this little project of mine. For starters, I need to look at the generation mechanism. Either I will be creating a utility that will do the project file manipulation or I will go a different direction. I’d like some feedback on this if you feel partial either way. Another thing I don’t support currently is areas. While this wouldn’t be too hard to support, I just don’t use areas and I wanted something up quickly (this is, after all, for a current project of mine). I’ll be adding support shortly. There are a few things that I haven’t covered in this post that I will most certainly be covering in another post, such as routing constraints and how these will be translated to JavaScript. I decided to open source this whole thing, since it’s a nice little utility I think others should really be using. Currently we’re using ASP.NET MVC 2, but it should work with MVC 3 as well. I’ll upgrade it as soon as MVC 3 is released. Along those same lines, I’m investigating how this could be put on the NuGet feed. Show me the Bits! OK, OK! The code is posted on my GitHub account. Go nuts. Tell me what you think. Tell me what you want. Tell me that you hate it. All feedback is welcome! https://github.com/zowens/ASP.NET-MVC-JavaScript-Routing

Read the article
CodePlex Daily Summary for Monday, July 01, 2013

CodePlex Daily Summary for Monday, July 01, 2013Popular ReleasesQuickMon: Version 2.10.3: Mainly just a service release - no major changes. Toolbar buttons on main and config window can now be re-arrange (using ALT key) Added property to disable corrective scriptsDotNetNuke® IFrame: IFrame 04.05.00: New DNN6/7 Manifest file and Azure Compatibility.VidCoder: 1.5.2 Beta: Fixed crash on presets with an invalid bitrate.Roadkill - .NET Wiki engine: Roadkill v1.7: New features in 1.7: New file manager: Multiple file uploads Drag and drop uploads Delete folders (admins only) Delete files (admins only) (Experimental) Syntaxhighlighting custom variable (using https://github.com/alexgorbatchev/SyntaxHighlighter) - use [[[code lang=c#|your code here]]] (Experimental) MathJax custom variable - use [[[Mathjax]]] and $$your tex$$ on the page. Improved black bar theme Site speed improvements for Javascript/CSS files - now just two files files ea...Download Sharepoint Solution package: Release 4: version updated for SP2013WinRT XAML Toolkit: WinRT XAML Toolkit - 1.5: WinRT XAML Toolkit based on the Windows 8.0 and 8.1 Preview SDKs. Do not download the source code from here if you are looking for latest updates! You can download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features Attachable Behaviors AwaitableUI extensions Composition library for visual tree rende...Gardens Point LEX: Gardens Point LEX version 1.2.1: The main distribution is a zip file. This contains the binary executable, documentation, source code and the examples. ChangesVersion 1.2.1 has new facilities for defining and manipulating character classes. These changes make the construction of large Unicode character classes more convenient. The runtime code for performing automaton backup has been re-implemented, and is now faster for scanners that need backup. Source CodeThe distribution contains a complete VS2010 project for the appli...ZXMAK2: Version 2.7.5.7: - fix TZX emulation (Bruce Lee, Zynaps) - fix ATM 16 colors for border - add memory module PROFI 512K; add PROFI V03 rom image; fix PROFI 3.XX configTwitter image Downloader: Twitter Image Downloader 2 with Installer: Application file with Install shield and Dot Net 4.0 redistributableUltimate Music Tagger: Ultimate Music Tagger 1.0.0.0: First release of Ultimate Music TaggerBlackJumboDog: Ver5.9.2: 2013.06.28 Ver5.9.2 (1) ??????????(????SMTP?????)?????????? (2) HTTPS???????????Outlook 2013 Add-In: Configuration Form: This new version includes the following changes: - Refactored code a bit. - Removing configuration from main form to gain more space to display items. - Moved configuration to separate form. You can click the little "gear" icon to access the configuration form (still very simple). - Added option to show past day appointments from the selected day (previous in time, that is). - Added some tooltips. You will have to uninstall the previous version (add/remove programs) if you had installed it ...Terminals: Version 3.0 - Release: Changes since version 2.0:Choose 100% portable or installed version Removed connection warning when running RDP 8 (Windows 8) client Fixed Active directory search Extended Active directory search by LDAP filters Fixed single instance mode when running on Windows Terminal server Merged usage of Tags and Groups Added columns sorting option in tables No UAC prompts on Windows 7 Completely new file persistence data layer New MS SQL persistence layer (Store data in SQL database)...NuGet: NuGet 2.6: Released June 26, 2013. Release notes: http://docs.nuget.org/docs/release-notes/nuget-2.6Python Tools for Visual Studio: 2.0 Beta: We’re pleased to announce the release of Python Tools for Visual Studio 2.0 Beta. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, and cross platform debugging support. For a quick overview of the general IDE experience, please watch this video: http://www.youtube.com/watch?v=TuewiStN...Player Framework by Microsoft: Player Framework for Windows 8 and WP8 (v1.3 beta): Preview: New MPEG DASH adaptive streaming plugin for Windows Azure Media Services Preview: New Ultraviolet CFF plugin. Preview: New WP7 version with WP8 compatibility. (source code only) Source code is now available via CodePlex Git Misc bug fixes and improvements: WP8 only: Added optional fullscreen and mute buttons to default xaml JS only: protecting currentTime from returning infinity. Some videos would cause currentTime to be infinity which could cause errors in plugins expectin...AssaultCube Reloaded: 2.5.8: SERVER OWNERS: note that the default maprot has changed once again. Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we continue to try to package for those OSes. Or better yet, try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compi...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.95: update parser to allow for CSS3 calc( function to nest. add recognition of -pponly (Preprocess-Only) switch in AjaxMinManifestTask build task. Fix crashing bug in EXE when processing a manifest file using the -xml switch and an error message needs to be displayed (like a missing input file). Create separate Clean and Bundle build tasks for working with manifest files (AjaxMinManifestCleanTask and AjaxMinBundleTask). Removed the IsCleanOperation from AjaxMinManifestTask -- use AjaxMinMan...VG-Ripper & PG-Ripper: VG-Ripper 2.9.44: changes NEW: Added Support for "ImgChili.net" links FIXED: Auto UpdaterDocument.Editor: 2013.25: What's new for Document.Editor 2013.25: Improved Spell Check support Improved User Interface Minor Bug Fix's, improvements and speed upsNew ProjectsAerCloud.net Client - Java, Linux & Windows: This project source code provides a step by step guide for using AerCloud.net Framework as a Service API. For more information please visit http://www.aercloudAmiClient – Asterisk Manager Interface (AMI) client based on the Rx Framework: Asterisk Manager Interface (AMI) client based on the Rx Frameworkbaidupan: cdcddddC#??????: C#??????ImageHelper: imagehelperIP switcher: IP switcher is a simple tool for switching settings, and store presets, on networkadapters.MastersProject: A MS project with a goal of creating a fully Code Contracts verified physics engine and a relatively simple game that uses it.Multiplatform card game: Example multipatform project.PhoneTools: A collection of tools designed to help developers create beautiful Windows Phone 8 apps.rodidexter: lllSharePoint 2013 List Item Encryption: This coding exercise project enables you to encrypt/decrypt list item text field in the browser using industry standard algorithms.tvaSoft: simulation, rotor dynamics, Finite Element Analisys, FEM, ODE, torsional vibration, flexural vibrationX3DML Project: X3DML is an xml-based markup language that defines rules for modeling 3D scenes from a tag-based document. It may be usefull in 3D web design and VR.zhuang-tfs: zhuang tfs

Read the article
Windows Azure Virtual Machine Readiness and Capacity Assessment for SQL Server

- by SQLOS Team

Windows Azure Virtual Machine Readiness and Capacity Assessment for Windows Server Machine Running SQL Server With the release of MAP Toolkit 8.0 Beta, we have added a new scenario to assess your Windows Azure Virtual Machine Readiness. The MAP 8.0 Beta performs a comprehensive assessment of Windows Servers running SQL Server to determine you level of readiness to migrate an on-premise physical or virtual machine to Windows Azure Virtual Machines. The MAP Toolkit then offers suggested changes to prepare the machines for migration, such as upgrading the operating system or SQL Server. MAP Toolkit 8.0 Beta is available for download here Your participation and feedback is very important to make the MAP Toolkit work better for you. We encourage you to participate in the beta program and provide your feedback at [email protected] or through one of our surveys. Now, let’s walk through the MAP Toolkit task for completing the Windows Azure Virtual Machine assessment and capacity planning. The tasks include the following: Perform an inventory View the Windows Azure VM Readiness results and report Collect performance data for determine VM sizing View the Windows Azure Capacity results and report Perform an inventory: 1. To perform an inventory against a single machine or across a complete environment, choose Perform an Inventory to launch the Inventory and Assessment Wizard as shown below: 2. After the Inventory and Assessment Wizard launches, select either the Windows computers or SQL Server scenario to inventory Windows machines. HINT: If you don’t care about completely inventorying a machine, just select the SQL Server scenario. Click Next to Continue. 3. On the Discovery Methods page, select how you want to discover computers and then click Next to continue. Description of Discovery Methods: Use Active Directory Domain Services -- This method allows you to query a domain controller via the Lightweight Directory Access Protocol (LDAP) and select computers in all or specific domains, containers, or OUs. Use this method if all computers and devices are in AD DS. Windows networking protocols -- This method uses the WIN32 LAN Manager application programming interfaces to query the Computer Browser service for computers in workgroups and Windows NT 4.0–based domains. If the computers on the network are not joined to an Active Directory domain, use only the Windows networking protocols option to find computers. System Center Configuration Manager (SCCM) -- This method enables you to inventory computers managed by System Center Configuration Manager (SCCM). You need to provide credentials to the System Center Configuration Manager server in order to inventory the managed computers. When you select this option, the MAP Toolkit will query SCCM for a list of computers and then MAP will connect to these computers. Scan an IP address range -- This method allows you to specify the starting address and ending address of an IP address range. The wizard will then scan all IP addresses in the range and inventory only those computers. Note: This option can perform poorly, if many IP addresses aren’t being used within the range. Manually enter computer names and credentials -- Use this method if you want to inventory a small number of specific computers. Import computer names from a files -- Using this method, you can create a text file with a list of computer names that will be inventoried. 4. On the All Computers Credentials page, enter the accounts that have administrator rights to connect to the discovered machines. This does not need to a domain account, but needs to be a local administrator. I have entered my domain account that is an administrator on my local machine. Click Next after one or more accounts have been added. NOTE: The MAP Toolkit primarily uses Windows Management Instrumentation (WMI) to collect hardware, device, and software information from the remote computers. In order for the MAP Toolkit to successfully connect and inventory computers in your environment, you have to configure your machines to inventory through WMI and also allow your firewall to enable remote access through WMI. The MAP Toolkit also requires remote registry access for certain assessments. In addition to enabling WMI, you need accounts with administrative privileges to access desktops and servers in your environment. 5. On the Credentials Order page, select the order in which want the MAP Toolkit to connect to the machine and SQL Server. Generally just accept the defaults and click Next. 6. On the Enter Computers Manually page, click Create to pull up at dialog to enter one or more computer names. 7. On the Summary page confirm your settings and then click Finish. After clicking Finish the inventory process will start, as shown below: Windows Azure Readiness results and report After the inventory progress has completed, you can review the results under the Database scenario. On the tile, you will see the number of Windows Server machine with SQL Server that were analyzed, the number of machines that are ready to move without changes and the number of machines that require further changes. If you click this Azure VM Readiness tile, you will see additional details and can generate the Windows Azure VM Readiness Report. After the report is generated, select View | Saved Reports and Proposals to view the location of the report. Open up WindowsAzureVMReadiness* report in Excel. On the Windows tab, you can see the results of the assessment. This report has a column for the Operating System and SQL Server assessment and provides a recommendation on how to resolve, if there a component is not supported. Collect Performance Data Launch the Performance Wizard to collect performance information for the Windows Server machines that you would like the MAP Toolkit to suggest a Windows Azure VM size for. Windows Azure Capacity results and report After the performance metrics are collected, the Azure VM Capacity title will display the number of Virtual Machine sizes that are suggested for the Windows Server and Linux machines that were analyzed. You can then click on the Azure VM Capacity tile to see the capacity details and generate the Windows Azure VM Capacity Report. Within this report, you can view the performance data that was collected and the Virtual Machine sizes. MAP Toolkit 8.0 Beta is available for download here Your participation and feedback is very important to make the MAP Toolkit work better for you. We encourage you to participate in the beta program and provide your feedback at [email protected] or through one of our surveys. Useful References: Windows Azure Homepage How to guides for Windows Azure Virtual Machines Provisioning a SQL Server Virtual Machine on Windows Azure Windows Azure Pricing Peter Saddow Senior Program Manager – MAP Toolkit Team

Read the article
C# Extension Methods - To Extend or Not To Extend...

- by James Michael Hare

I've been thinking a lot about extension methods lately, and I must admit I both love them and hate them. They are a lot like sugar, they taste so nice and sweet, but they'll rot your teeth if you eat them too much. I can't deny that they aren't useful and very handy. One of the major components of the Shared Component library where I work is a set of useful extension methods. But, I also can't deny that they tend to be overused and abused to willy-nilly extend every living type. So what constitutes a good extension method? Obviously, you can write an extension method for nearly anything whether it is a good idea or not. Many times, in fact, an idea seems like a good extension method but in retrospect really doesn't fit. So what's the litmus test? To me, an extension method should be like in the movies when a person runs into their twin, separated at birth. You just know you're related. Obviously, that's hard to quantify, so let's try to put a few rules-of-thumb around them. A good extension method should: Apply to any possible instance of the type it extends. Simplify logic and improve readability/maintainability. Apply to the most specific type or interface applicable. Be isolated in a namespace so that it does not pollute IntelliSense. So let's look at a few examples in relation to these rules. The first rule, to me, is the most important of all. Once again, it bears repeating, a good extension method should apply to all possible instances of the type it extends. It should feel like the long lost relative that should have been included in the original class but somehow was missing from the family tree. Take this nifty little int extension, I saw this once in a blog and at first I really thought it was pretty cool, but then I started noticing a code smell I couldn't quite put my finger on. So let's look: public static class IntExtensinos { public static int Seconds(int num) { return num * 1000; } public static int Minutes(int num) { return num * 60000; } } This is so you could do things like: ... Thread.Sleep(5.Seconds()); ... proxy.Timeout = 1.Minutes(); ... Awww, you say, that's cute! Well, that's the problem, it's kitschy and it doesn't always apply (and incidentally you could achieve the same thing with TimeStamp.FromSeconds(5)). It's syntactical candy that looks cool, but tends to rot and pollute the code. It would allow things like: total += numberOfTodaysOrders.Seconds(); which makes no sense and should never be allowed. The problem is you're applying an extension method to a logical domain, not a type domain. That is, the extension method Seconds() doesn't really apply to ALL ints, it applies to ints that are representative of time that you want to convert to milliseconds. Do you see what I mean? The two problems, in a nutshell, are that a) Seconds() called off a non-time value makes no sense and b) calling Seconds() off something to pass to something that does not take milliseconds will be off by a factor of 1000 or worse. Thus, in my mind, you should only ever have an extension method that applies to the whole domain of that type. For example, this is one of my personal favorites: public static bool IsBetween<T>(this T value, T low, T high) where T : IComparable<T> { return value.CompareTo(low) >= 0 && value.CompareTo(high) <= 0; } This allows you to check if any IComparable<T> is within an upper and lower bound. Think of how many times you type something like: if (response.Employee.Address.YearsAt >= 2 && response.Employee.Address.YearsAt <= 10) { ... } Now, you can instead type: if(response.Employee.Address.YearsAt.IsBetween(2, 10)) { ... } Note that this applies to all IComparable<T> -- that's ints, chars, strings, DateTime, etc -- and does not depend on any logical domain. In addition, it satisfies the second point and actually makes the code more readable and maintainable. Let's look at the third point. In it we said that an extension method should fit the most specific interface or type possible. Now, I'm not saying if you have something that applies to enumerables, you create an extension for List, Array, Dictionary, etc (though you may have reasons for doing so), but that you should beware of making things TOO general. For example, let's say we had an extension method like this: public static T ConvertTo<T>(this object value) { return (T)Convert.ChangeType(value, typeof(T)); } This lets you do more fluent conversions like: double d = "5.0".ConvertTo<double>(); However, if you dig into Reflector (LOVE that tool) you will see that if the type you are calling on does not implement IConvertible, what you convert to MUST be the exact type or it will throw an InvalidCastException. Now this may or may not be what you want in this situation, and I leave that up to you. Things like this would fail: object value = new Employee(); ... // class cast exception because typeof(IEmployee) != typeof(Employee) IEmployee emp = value.ConvertTo<IEmployee>(); Yes, that's a downfall of working with Convertible in general, but if you wanted your fluent interface to be more type-safe so that ConvertTo were only callable on IConvertibles (and let casting be a manual task), you could easily make it: public static T ConvertTo<T>(this IConvertible value) { return (T)Convert.ChangeType(value, typeof(T)); } This is what I mean by choosing the best type to extend. Consider that if we used the previous (object) version, every time we typed a dot ('.') on an instance we'd pull up ConvertTo() whether it was applicable or not. By filtering our extension method down to only valid types (those that implement IConvertible) we greatly reduce our IntelliSense pollution and apply a good level of compile-time correctness. Now my fourth rule is just my general rule-of-thumb. Obviously, you can make extension methods as in-your-face as you want. I included all mine in my work libraries in its own sub-namespace, something akin to: namespace Shared.Core.Extensions { ... } This is in a library called Shared.Core, so just referencing the Core library doesn't pollute your IntelliSense, you have to actually do a using on Shared.Core.Extensions to bring the methods in. This is very similar to the way Microsoft puts its extension methods in System.Linq. This way, if you want 'em, you use the appropriate namespace. If you don't want 'em, they won't pollute your namespace. To really make this work, however, that namespace should only include extension methods and subordinate types those extensions themselves may use. If you plant other useful classes in those namespaces, once a user includes it, they get all the extensions too. Also, just as a personal preference, extension methods that aren't simply syntactical shortcuts, I like to put in a static utility class and then have extension methods for syntactical candy. For instance, I think it imaginable that any object could be converted to XML: namespace Shared.Core { // A collection of XML Utility classes public static class XmlUtility { ... // Serialize an object into an xml string public static string ToXml(object input) { var xs = new XmlSerializer(input.GetType()); // use new UTF8Encoding here, not Encoding.UTF8. The later includes // the BOM which screws up subsequent reads, the former does not. using (var memoryStream = new MemoryStream()) using (var xmlTextWriter = new XmlTextWriter(memoryStream, new UTF8Encoding())) { xs.Serialize(xmlTextWriter, input); return Encoding.UTF8.GetString(memoryStream.ToArray()); } } ... } } I also wanted to be able to call this from an object like: value.ToXml(); But here's the problem, if i made this an extension method from the start with that one little keyword "this", it would pop into IntelliSense for all objects which could be very polluting. Instead, I put the logic into a utility class so that users have the choice of whether or not they want to use it as just a class and not pollute IntelliSense, then in my extensions namespace, I add the syntactical candy: namespace Shared.Core.Extensions { public static class XmlExtensions { public static string ToXml(this object value) { return XmlUtility.ToXml(value); } } } So now it's the best of both worlds. On one hand, they can use the utility class if they don't want to pollute IntelliSense, and on the other hand they can include the Extensions namespace and use as an extension if they want. The neat thing is it also adheres to the Single Responsibility Principle. The XmlUtility is responsible for converting objects to XML, and the XmlExtensions is responsible for extending object's interface for ToXml().

Read the article
Reg Gets a Job at Red Gate (and what happens behind the scenes)

- by red(at)work

Mr Reg Gater works at one of Cambridge’s many high-tech companies. He doesn’t love his job, but he puts up with it because... well, it could be worse. Every day he drives to work around the Red Gate roundabout, wondering what his boss is going to blame him for today, and wondering if there could be a better job out there for him. By late morning he already feels like handing his notice in. He got the hacky look from his boss for being 5 minutes late, and then they ran out of tea. Again. He goes to the local sandwich shop for lunch, and picks up a Red Gate job menu and a Book of Red Gate while he’s waiting for his order. That night, he goes along to Cambridge Geek Nights and sees some very enthusiastic Red Gaters talking about the work they do; it sounds interesting and, of all things, fun. He takes a quick look at the job vacancies on the Red Gate website, and an hour later realises he’s still there – looking at videos, photos and people profiles. He especially likes the Red Gate’s Got Talent page, and is very impressed with Simon Johnson’s marathon time. He thinks that he’d quite like to work with such awesome people. It just so happens that Red Gate recently decided that they wanted to hire another hot shot team member. Behind the scenes, the wheels were set in motion: the recruitment team met with the hiring manager to understand exactly what they’re looking for, and to decide what interview tests to do, who will do the interviews, and to kick-start any interview training those people might need. Next up, a job description and job advert were written, and the job was put on the market. Reg applies, and his CV lands in the Recruitment team’s inbox and they open it up with eager anticipation that Reg could be the next awesome new starter. He looks good, and in a jiffy they’ve arranged an interview. Reg arrives for his interview, and is greeted by a smiley receptionist. She offers him a selection of drinks and he feels instantly relaxed. A couple of interviews and an assessment later, he gets a job offer. We make his day and he makes ours by accepting, and becoming one of the 60 new starters so far this year. Behind the scenes, things start moving all over again. The HR team arranges for a “Welcome” goodie box to be whisked out to him, prepares his contract, sends an email to Information Services (Or IS for short - we’ll come back to them), keeps in touch with Reg to make sure he knows what to expect on his first day, and of course asks him to fill in the all-important wiki questionnaire so his new colleagues can start to get to know him before he even joins. Meanwhile, the IS team see an email in SupportWorks from HR. They see that Reg will be starting in the sales team in a few days’ time, and they know exactly what to do. They pull out a new machine, and within minutes have used their automated deployment software to install every piece of software that a new recruit could ever need. They also check with Reg’s new manager to see if he has any special requirements that they could help with. Reg starts and is amazed to find a fully configured machine sitting on his desk, complete with stationery and all the other tools he’ll need to do his job. He feels even more cared for after he gets a workstation assessment, and realises he’d be comfier with an ergonomic keyboard and a footstool. They arrive minutes later, just like that. His manager starts him off on his induction and sales training. Along with job-specific training, he’ll also have a buddy to help him find his feet, and loads of pre-arranged demos and introductions. Reg settles in nicely, and is great at his job. He enjoys the canteen, and regularly eats one of the 40,000 meals provided each year. He gets used to the selection of teas that are available, develops a taste for champagne launch parties, and has his fair share of the 25,000 cups of coffee downed at Red Gate towers each year. He goes along to some Feel Good Fund events, and donates a little something to charity in exchange for a turn on the chocolate fountain. He’s looking a little scruffy, so he decides to get his hair cut in between meetings, just in time for the Red Gate birthday company photo. Reg starts a new project: identifying existing customers to up-sell to new bundles. He talks with the web team to generate lists of qualifying customers who haven’t recently been sent marketing emails, and sends emails out, using a new in-house developed tool to schedule follow-up calls in CRM for the same group. The customer responds, saying they’d like to upgrade but are having a licensing problem – Reg sends the issue to Support, and it gets routed to the web team. The team identifies a workaround, and the bug gets scheduled into the next maintenance release in a fortnight’s time (hey; they got lucky). With all the new stuff Reg is working on, he realises that he’d be way more efficient if he had a third monitor. He speaks to IS and they get him one - no argument. He also needs a test machine and then some extra memory. Done. He then thinks he needs an iPad, and goes to ask for one. He gets told to stop pushing his luck. Some time later, Reg’s wife has a baby, so Reg gets 2 weeks of paid paternity leave and a bunch of flowers sent to his house. He signs up to the childcare scheme so that he doesn’t have to pay National Insurance on the first £243 of his childcare. The accounts team makes it all happen seamlessly, as they did with his Give As You Earn payments, which come out of his wages and go straight to his favorite charity. Reg’s sales career is going well. He’s grateful for the help that he gets from the product support team. How do they answer all those 900-ish support calls so effortlessly each month? He’s impressed with the patches that are sent out to customers who find “interesting behavior” in their tools, and to the customers who just must have that new feature. A little later in his career at Red Gate, Reg decides that he’d like to learn about management. He goes on some management training specially customised for Red Gate, joins the Management Book Club, and gets together with other new managers to brainstorm how to get the most out of one to one meetings with his team. Reg decides to go for a game of Foosball to celebrate his good fortune with his team, and has to wait for Finance to finish. While he’s waiting, he reflects on the wonderful time he’s had at Red Gate. He can’t put his finger on what it is exactly, but he knows he’s on to a good thing. All of the stuff that happened to Reg didn’t just happen magically. We’ve got teams of people working relentlessly behind the scenes to make sure that everyone here is comfortable, safe, well fed and caffeinated to the max.

Read the article
Microsoft and the open source community

- by Charles Young

For the last decade, I have repeatedly, in my imitable Microsoft fan boy style, offered an alternative view to commonly held beliefs about Microsoft's stance on open source licensing. In earlier times, leading figures in Microsoft were very vocal in resisting the idea that commercial licensing is outmoded or morally reprehensible. Many people interpreted this as all-out corporate opposition to open source licensing. I never read it that way. It is true that I've met individual employees of Microsoft who are antagonistic towards FOSS (free and open source software), but I've met more who are supportive or at least neutral on the subject. In any case, individual attitudes of employees don't necessarily reflect a corporate stance. The strongest opposition I've encountered has actually come from outside the company. It's not a charitable thought, but I sometimes wonder if there are people in the .NET community who are opposed to FOSS simply because they believe, erroneously, that Microsoft is opposed. Here, for what it is worth, are the points I've repeated endlessly over the years and which have often been received with quizzical scepticism. a) A decade ago, Microsoft's big problem was not FOSS per se, or even with copyleft. The thing which really kept them awake at night was the fear that one day, someone might find, deep in the heart of the Windows code base, some code that should not be there and which was published under GPL. The likelihood of this ever happening has long since faded away, but there was a time when MS was running scared. I suspect this is why they held out for a while from making Windows source code open to inspection. Nowadays, as an MVP, I am positively encouraged to ask to see Windows source. b) Microsoft has never opposed the open source community. They have had problems with specific people and organisations in the FOSS community. Back in the 1990s, Richard Stallman gave time and energy to a successful campaign to launch antitrust proceedings against Microsoft. In more recent times, the negative attitude of certain people to Microsoft's submission of two FOSS licences to the OSI (both of which have long since been accepted), and the mad scramble to try to find any argument, however tenuous, to block their submission was not, let us say, edifying. c) Microsoft has never, to my knowledge, written off the FOSS model. They certainly don't agree that more traditional forms of licensing are inappropriate or immoral, and they've always been prepared to say so. One reason why it was so hard to convince people that Microsoft is not rabidly antagonistic towards FOSS licensing is that so many people think they have no involvement in open source. A decade ago, there was virtually no evidence of any such involvement. However, that was a long time ago. Quietly over the years, Microsoft has got on with the job of working out how to make use of FOSS licensing and how to support the FOSS community. For example, as well as making increasingly extensive use of Github, they run an important FOSS forge (CodePlex) on which they, themselves, host many hundreds of distinct projects. The total count may even be in the thousands now. I suspect there is a limit of about 500 records on CodePlex searches because, for the past few years, whenever I search for Microsoft-specific projects on CodePlex, I always get approx. 500 hits. Admittedly, a large volume of the stuff they publish under FOSS licences amounts to code samples, but many of those 'samples' have grown into useful and fully featured frameworks, libraries and tools. All this is leading up to the observation that yesterday's announcement by Scott Guthrie marks a significant milestone and should not go unnoticed. If you missed it, let me summarise. From the first release of .NET, Microsoft has offered a web development framework called ASP.NET. The core libraries are included in the .NET framework which is released free of charge, but which is not open source. However, in recent years, the number of libraries that constitute ASP.NET have grown considerably. Today, most professional ASP.NET web development exploits the ASP.NET MVC framework. This, together with several other important parts of the ASP.NET technology stack, is released on CodePlex under the Apache 2.0 licence. Hence, today, a huge swathe of web development on the .NET/Azure platform relies four-square on the use of FOSS frameworks and libraries. Yesterday, Scott Guthrie announced the next stage of ASP.NET's journey towards FOSS nirvana. This involves extending ASP.NET's FOSS stack to include Web API and the MVC Razor view engine which is rapidly becoming the de facto 'standard' for building web pages in ASP.NET. However, perhaps the more important announcement is that the ASP.NET team will now accept and review contributions from the community. Scott points out that this model is already in place elsewhere in Microsoft, and specifically draws attention to development of the Windows Azure SDKs. These SDKs are central to Azure development. The .NET and Java SDKs are published under Apache 2.0 on Github and Microsoft is open to community contributions. Accepting contributions is a more profound move than simply releasing code under FOSS licensing. It means that Microsoft is wholeheartedly moving towards a full-blooded open source approach for future evolution of some of their central and most widely used .NET and Azure frameworks and libraries. In conjunction with Scott's announcement, Microsoft has also released Git support for CodePlex (at long last!) and, perhaps more importantly, announced significant new investment in their own FOSS forge. Here at Solidsoft we have several reasons to be very interested in Scott's announcement. I'll draw attention to one of them. Earlier this year we wrote the initial version of a new UK Government web application called CloudStore. CloudStore provides a way for local and central government to discover and purchase applications and services. We wrote the web site using ASP.NET MVC which is FOSS. However, this point has been lost on the ladies and gentlemen of the press and, I suspect, on some of the decision makers on the government side. They announced a few weeks ago that future versions of CloudStore will move to a FOSS framework, clearly oblivious of the fact that it is already built on a FOSS framework. We are, it is fair to say, mildly irked by the uninformed and badly out-of-date assumption that “if it is Microsoft, it can't be FOSS”. Old prejudices live on.

Read the article
Using Sitecore RenderingContext Parameters as MVC controller action arguments

- by Kyle Burns

I have been working with the Technical Preview of Sitecore 6.6 on a project and have been for the most part happy with the way that Sitecore (which truly is an MVC implementation unto itself) has been expanded to support ASP.NET MVC. That said, getting up to speed with the combined platform has not been entirely without stumbles and today I want to share one area where Sitecore could have really made things shine from the "it just works" perspective. A couple days ago I was asked by a colleague about the usage of the "Parameters" field that is defined on Sitecore's Controller Rendering data template. Based on the standard way that Sitecore handles a field named Parameters, I was able to deduce that the field expected key/value pairs separated by the "&" character, but beyond that I wasn't sure and didn't see anything from a documentation perspective to guide me, so it was time to dig and find out where the data in the field was made available. My first thought was that it would be really nice if Sitecore handled the parameters in this field consistently with the way that ASP.NET MVC handles the various parameter collections on the HttpRequest object and automatically maps them to parameters of the action method executing. Being the hopeful sort, I configured a name/value pair on one of my renderings, added a parameter with matching name to the controller action and fired up the bugger to see... that the parameter was not populated. Having established that the field's value was not going to be presented to me the way that I had hoped it would, the next assumption that I would work on was that Sitecore would handle this field similar to how they handle other similar data and would plug it into some ambient object that I could reference from within the controller method. After a considerable amount of guessing, testing, and cracking code open with Redgate's Reflector (a must-have companion to Sitecore documentation), I found that the most direct way to access the parameter was through the ambient RenderingContext object using code similar to: string myArgument = string.Empty; var rc = Sitecore.Mvc.Presentation.RenderingContext.CurrentOrNull; if (rc != null) { var parms = rc.Rendering.Parameters; myArgument = parms["myArgument"]; } At this point, we know how this field is used out of the box from Sitecore and can provide information from Sitecore's Content Editor that will be available when the controller action is executing, but it feels a little dirty. In order to properly test the action method I would have to do a lot of setup work and possible use an isolation framework such as Pex and Moles to get at a value that my action method is dependent upon. Notice I said that my method is dependent upon the value but in order to meet that dependency I've accepted another dependency upon Sitecore's RenderingContext. I'm a big believer in, when possible, ensuring that any piece of code explicitly advertises dependencies using the method signature, so I found myself still wanting this to work the same as if the parameters were in the request route, querystring, or form by being able to add a myArgument parameter to the action method and have this parameter populated by the framework. Lucky for us, the ASP.NET MVC framework is extremely flexible and provides some easy to grok and use extensibility points. ASP.NET MVC is able to provide information from the request as input parameters to controller actions because it uses objects which implement an interface called IValueProvider and have been registered to service the application. The most basic statement of responsibility for an IValueProvider implementation is "I know about some data which is indexed by key. If you hand me the key for a piece of data that I know about I give you that data". When preparing to invoke a controller action, the framework queries registered IValueProvider implementations with the name of each method argument to see if the ValueProvider can supply a value for the parameter. (the rest of this post will assume you're working along and make a lot more sense if you do) Let's pull Sitecore out of the equation for a second to simplify things and create an extremely simple IValueProvider implementation. For this example, I first create a new ASP.NET MVC3 project in Visual Studio, selecting "Internet Application" and otherwise taking defaults (I'm assuming that anyone reading this far in the post either already knows how to do this or will need to take a quick run through one of the many available basic MVC tutorials such as the MVC Music Store). Once the new project is created, go to the Index action of HomeController. This action sets a Message property on the ViewBag to "Welcome to ASP.NET MVC!" and invokes the View, which has been coded to display the Message. For our example, we will remove the hard coded message from this controller (although we'll leave it just as hard coded somewhere else - this is sample code). For the first step in our exercise, add a string parameter to the Index action method called welcomeMessage and use the value of this argument to set the ViewBag.Message property. The updated Index action should look like: public ActionResult Index(string welcomeMessage) { ViewBag.Message = welcomeMessage; return View(); } This represents the entirety of the change that you will make to either the controller or view. If you run the application now, the home page will display and no message will be presented to the user because no value was supplied to the Action method. Let's now write a ValueProvider to ensure this parameter gets populated. We'll start by creating a new class called StaticValueProvider. When the class is created, we'll update the using statements to ensure that they include the following: using System.Collections.Specialized; using System.Globalization; using System.Web.Mvc; With the appropriate using statements in place, we'll update the StaticValueProvider class to implement the IValueProvider interface. The System.Web.Mvc library already contains a pretty flexible dictionary-like implementation called NameValueCollectionValueProvider, so we'll just wrap that and let it do most of the real work for us. The completed class looks like: public class StaticValueProvider : IValueProvider { private NameValueCollectionValueProvider _wrappedProvider; public StaticValueProvider(ControllerContext controllerContext) { var parameters = new NameValueCollection(); parameters.Add("welcomeMessage", "Hello from the value provider!"); _wrappedProvider = new NameValueCollectionValueProvider(parameters, CultureInfo.InvariantCulture); } public bool ContainsPrefix(string prefix) { return _wrappedProvider.ContainsPrefix(prefix); } public ValueProviderResult GetValue(string key) { return _wrappedProvider.GetValue(key); } } Notice that the only entry in the collection matches the name of the argument to our HomeController's Index action. This is the important "secret sauce" that will make things work. We've got our new value provider now, but that's not quite enough to be finished. Mvc obtains IValueProvider instances using factories that are registered when the application starts up. These factories extend the abstract ValueProviderFactory class by initializing and returning the appropriate implementation of IValueProvider from the GetValueProvider method. While I wouldn't do so in production code, for the sake of this example, I'm going to add the following class definition within the StaticValueProvider.cs source file: public class StaticValueProviderFactory : ValueProviderFactory { public override IValueProvider GetValueProvider(ControllerContext controllerContext) { return new StaticValueProvider(controllerContext); } } Now that we have a factory, we can register it by adding the following line to the end of the Application_Start method in Global.asax.cs: ValueProviderFactories.Factories.Add(new StaticValueProviderFactory()); If you've done everything right to this point, you should be able to run the application and be presented with the home page reading "Hello from the value provider!". Now that you have the basics of the IValueProvider down, you have everything you need to enhance your Sitecore MVC implementation by adding an IValueProvider that exposes values from the ambient RenderingContext's Parameters property. I'll provide the code for the IValueProvider implementation (which should look VERY familiar) and you can use the work we've already done as a reference to create and register the factory: public class RenderingContextValueProvider : IValueProvider { private NameValueCollectionValueProvider _wrappedProvider = null; public RenderingContextValueProvider(ControllerContext controllerContext) { var collection = new NameValueCollection(); var rc = RenderingContext.CurrentOrNull; if (rc != null && rc.Rendering != null) { foreach(var parameter in rc.Rendering.Parameters) { collection.Add(parameter.Key, parameter.Value); } } _wrappedProvider = new NameValueCollectionValueProvider(collection, CultureInfo.InvariantCulture); } public bool ContainsPrefix(string prefix) { return _wrappedProvider.ContainsPrefix(prefix); } public ValueProviderResult GetValue(string key) { return _wrappedProvider.GetValue(key); } } In this post I've discussed the MVC IValueProvider used to map data to controller action method arguments and how this can be integrated into your Sitecore 6.6 MVC solution.

Read the article
MySQL for Excel 1.1.3 has been released

- by Javier Treviño

The MySQL Windows Experience Team is proud to announce the release of MySQL for Excel version 1.1.3, the latest addition to the MySQL Installer for Windows. MySQL for Excel is an application plug-in enabling data analysts to very easily access and manipulate MySQL data within Microsoft Excel. It enables you to directly work with a MySQL database from within Microsoft Excel so you can easily do tasks such as: Importing MySQL Data into Excel Exporting Excel data directly into MySQL to a new or existing table Editing MySQL data directly within Excel MySQL for Excel is installed using the MySQL Installer for Windows. The MySQL installer comes in 2 versions Full (150 MB) which includes a complete set of MySQL products with their binaries included in the download Web (1.5 MB - a network install) which will just pull MySQL for Excel over the web and install it when run. You can download MySQL Installer from our official Downloads page at http://dev.mysql.com/downloads/installer/. MySQL for Excel 1.1.3 introduces the following features: Upon saving a Workbook containing Worksheets in Edit Mode, the user is asked if he wants to exit the Edit Mode on all Worksheets before their parent Workbook is saved so the Worksheets are saved unprotected, otherwise the Worksheets will remain protected and the users will be able to unprotect them later retrieving the passkeys from the application log after closing MySQL for Excel. Added background coloring to the column names header row of an Import Data operation to have the same look as the one in an Edit Data operation (i.e. gray-ish background). Connection passwords can be stored securely just like MySQL Workbench does and these secured passwords are shared with Workbench in the same way connections are. Changed the way the MySQL for Excel ribbon toggle button works, instead of just showing or hiding the add-in it actually opens and closes it. Added a connection test before any operation against the database (schema creation, data import, append, export or edition) so the operation dialog is not shown and a friendlier error message is shown. Also this release contains the following bug fixes: Added a check on every connection test for an expired password, if the password has been expired a dialog is now shown to the user to reset the password. Bug #17354118 - DON'T HANDLE EXPIRED PASSWORDS Added code to escape text values to be imported to an Excel worksheet that start with an equals sign so Excel does not treat those values as formulas that will fail evaluation. This is an option turned on by default that can be turned off by users if they wish to import values to be treated as Excel formulas. Bug #17354102 - ERROR IMPORTING TEXT VALUES TO EXCEL STARTING WITH AN EQUALS SIGN Added code to properly check the reason for a failing connection, if it's a failing password the user gets a dialog to retry the connection with a different password until the connection succeeds, a connection error not related to the password is thrown or the user cancels. If the failing connection is not related to a bad password an error message is shown to the users indicating the reason of the failure. Bug #16239007 - CONNECTIONS TO MYSQL SERVICES NOT RUNNING DISPLAY A WRONG PASSWORD ERROR MESSAGE Added global options dialog that can be accessed from the Schema Selection and DB Object Selection panels where the timeouts for the connection to the DB Server and for the query commands can be changed from their default values (15 seconds for the connection timeout and 30 seconds for the query timeout). MySQL Bug #68732, Bug #17191646 - QUERY TIMEOUT CANNOT BE ADJUSTED IN MYSQL FOR EXCEL Changed the Varchar(65,535) data type shown in the Export Data data type combo box to Text since the maximum row size is 65,535 bytes and any autodetected column data type with a length greater than 4,000 should be set to Text actually for the table to be created successfully. MySQL Bug #69779, Bug #17191633 - EXPORT FAILS FOR EXCEL FILES CONTAINING > 4000 CHARACTERS OF TEXT PER CELL Removed code that was replacing all spaces typed by the user in an overriden data type for a new column in an Export Data operation, also improved the data type detection code to flag as invalid data types with parenthesis but without any text inside or where the contents inside the parenthesis are not valid for the specific data type. Bug #17260260 - EXPORT DATA SET TYPE NOT WORKING WITH MEMBER VALUES CONTAINING SPACES Added support for the year data type with a length of 2 or 4 and a validation that valid values are integers between 1901-2155 (for 4-digit years) or between 0-99 (for 2-digit years). Bug #17259915 - EXPORT DATA YEAR DATA TYPE NOT RECOGNIZED IF DECLARED WITH A DISPLAY WIDTH) Fixed code for Export Data operations where users overrode the data type for columns typing Text in the data type combobox, which is a valid data type but was not recognized as such. Bug #17259490 - EXPORT DATA TEXT DATA TYPE NOT RECOGNIZED AS A VALID DATA TYPE Changed the location of the registry where the MySQL for Excel add-in is installed to HKEY_LOCAL_MACHINE instead of HKEY_CURRENT_USER so the add-in is accessible by all users and not only to the user that installed it. For this to work with Excel 2007 a hotfix may be required (see http://support.microsoft.com/kb/976477). MySQL Bug #68746, Bug #16675992 - EXCEL-ADD-IN IS ONLY INSTALLED FOR USER ACCOUNT THAT THE INSTALLATION RUNS UNDER Added support for Excel 2013 Single Document Interface, now that Excel 2013 creates 1 window per workbook also the Excel Add-In maintains an independent custom task pane in each window. MySQL Bug #68792, Bug #17272087 - MYSQL FOR EXCEL SIDEBAR DOES NOT APPEAR IN EXCEL 2013 (WITH WORKAROUND) Included the latest MySQL Utility with a code fix for the COM exception thrown when attempting to open Workbench in the Manage Connections window. Bug #17258966 - MYSQL WORKBENCH NOT OPENED BY CLICKING MANAGE CONNECTIONS HOTLABEL Fixed code for Append Data operations that was not applying a calculated automatic mapping correctly when the source and target tables had different number of columns, some columns with the same name but some of those lying on column indexes beyond the limit of the other source/target table. MySQL Bug #69220, Bug #17278349 - APPEND DOESN'T AUTOMATICALLY DETECT EXCEL COL HEADER WITH SAME NAME AS SQL FIELD Fixed some code for Edit Data operations that was escaping special characters twice (during edition in Excel and then upon sending the query to the MySQL server). MySQL Bug #68669, Bug #17271693 - A BACKSLASH IS INSERTED BEFORE AN APOSTROPHE EDITING TABLE WITH MYSQL FOR EXCEL Upgraded MySQL Utility with latest version that encapsulates dialog base classes and introduces more classes to handle Workbench connections, and removed these from the Excel project. Bug #16500331 - CAN'T DELETE CONNECTIONS CREATED WITHIN ADDIN You can access the MySQL for Excel documentation at http://dev.mysql.com/doc/refman/5.6/en/mysql-for-excel.html You can find our team’s blog at http://blogs.oracle.com/MySQLOnWindows. You can also post questions on our MySQL for Excel forum found at http://forums.mysql.com/. Enjoy and thanks for the support!

Read the article
More Great Improvements to the Windows Azure Management Portal

- by ScottGu

Over the last 3 weeks we’ve released a number of enhancements to the new Windows Azure Management Portal. These new capabilities include: Localization Support for 6 languages Operation Log Support Support for SQL Database Metrics Virtual Machine Enhancements (quick create Windows + Linux VMs) Web Site Enhancements (support for creating sites in all regions, private github repo deployment) Cloud Service Improvements (deploy from storage account, configuration support of dedicated cache) Media Service Enhancements (upload, encode, publish, stream all from within the portal) Virtual Networking Usability Enhancements Custom CNAME support with Storage Accounts All of these improvements are now live in production and available to start using immediately. Below are more details on them: Localization Support The Windows Azure Portal now supports 6 languages – English, German, Spanish, French, Italian and Japanese. You can easily switch between languages by clicking on the Avatar bar on the top right corner of the Portal: Selecting a different language will automatically refresh the UI within the portal in the selected language: Operation Log Support The Windows Azure Portal now supports the ability for administrators to review the “operation logs” of the services they manage – making it easy to see exactly what management operations were performed on them. You can query for these by selecting the “Settings” tab within the Portal and then choosing the “Operation Logs” tab within it. This displays a filter UI that enables you to query for operations by date and time: As of the most recent release we now show logs for all operations performed on Cloud Services and Storage Accounts. You can click on any operation in the list and click the “Details” button in the command bar to retrieve detailed status about it. This now makes it possible to retrieve details about every management operation performed. In future updates you’ll see us extend the operation log capability to apply to all Windows Azure Services – which will enable great post-mortem and audit support. Support for SQL Database Metrics You can now monitor the number of successful connections, failed connections and deadlocks in your SQL databases using the new “Dashboard” view provided on each SQL Database resource: Additionally, if the database is added as a “linked resource” to a Web Site or Cloud Service, monitoring metrics for the linked SQL database are shown along with the Web Site or Cloud Service metrics in the dashboard. This helps with viewing and managing aggregated information across both resources in your application. Enhancements to Virtual Machines The most recent Windows Azure Portal release brings with it some nice usability improvements to Virtual Machines: Integrated Quick Create experience for Windows and Linux VMs Creating a new Windows or Linux VM is now easy using the new “Quick Create” experience in the Portal: In addition to Windows VM templates you can also now select Linux image templates in the quick create UI: This makes it incredibly easy to create a new Virtual Machine in only a few seconds. Enhancements to Web Sites Prior to this past month’s release, users were forced to choose a single geographical region when creating their first site. After that, subsequent sites could only be created in that same region. This restriction has now been removed, and you can now create sites in any region at any time and have up to 10 free sites in each supported region: One of the new regions we’ve recently opened up is the “East Asia” region. This allows you to now deploy sites to North America, Europe and Asia simultaneously. Private GitHub Repository Support This past week we also enabled Git based continuous deployment support for Web Sites from private GitHub and BitBucket repositories (previous to this you could only enable this with public repositories). Enhancements to Cloud Services Experience The most recent Windows Azure Portal release brings with it some nice usability improvements to Cloud Services: Deploy a Cloud Service from a Windows Azure Storage Account The Windows Azure Portal now supports deploying an application package and configuration file stored in a blob container in Windows Azure Storage. The ability to upload an application package from storage is available when you custom create, or upload to, or update a cloud service deployment. To upload an application package and configuration, create a Cloud Service, then select the file upload dialog, and choose to upload from a Windows Azure Storage Account: To upload an application package from storage, click the “FROM STORAGE” button and select the application package and configuration file to use from the new blob storage explorer in the portal. Configure Windows Azure Caching in a caching enabled cloud service If you have deployed the new dedicated cache within a cloud service role, you can also now configure the cache settings in the portal by navigating to the configuration tab of for your Cloud Service deployment. The configuration experience is similar to the one in Visual Studio when you create a cloud service and add a caching role. The portal now allows you to add or remove named caches and change the settings for the named caches – all from within the Portal and without needing to redeploy your application. Enhancements to Media Services You can now upload, encode, publish, and play your video content directly from within the Windows Azure Portal. This makes it incredibly easy to get started with Windows Azure Media Services and perform common tasks without having to write any code. Simply navigate to your media service and then click on the “Content” tab. All of the media content within your media service account will be listed here: Clicking the “upload” button within the portal now allows you to upload a media file directly from your computer: This will cause the video file you chose from your local file-system to be uploaded into Windows Azure. Once uploaded, you can select the file within the content tab of the Portal and click the “Encode” button to transcode it into different streaming formats: The portal includes a number of pre-set encoding formats that you can easily convert media content into: Once you select an encoding and click the ok button, Windows Azure Media Services will kick off an encoding job that will happen in the cloud (no need for you to stand-up or configure a custom encoding server). When it’s finished, you can select the video in the “Content” tab and then click PUBLISH in the command bar to setup an origin streaming end-point to it: Once the media file is published you can point apps against the public URL and play the content using Windows Azure Media Services – no need to setup or run your own streaming server. You can also now select the file and click the “Play” button in the command bar to play it using the streaming endpoint directly within the Portal: This makes it incredibly easy to try out and use Windows Azure Media Services and test out an end-to-end workflow without having to write any code. Once you test things out you can of course automate it using script or code – providing you with an incredibly powerful Cloud Media platform that you can use. Enhancements to Virtual Network Experience Over the last few months, we have received feedback on the complexity of the Virtual Network creation experience. With these most recent Portal updates, we have added a Quick Create experience that makes the creation experience very simple. All that an administrator now needs to do is to provide a VNET name, choose an address space and the size of the VNET address space. They no longer need to understand the intricacies of the CIDR format or walk through a 4-page wizard or create a VNET / subnet. This makes creating virtual networks really simple: The portal also now has a “Register DNS Server” task that makes it easy to register DNS servers and associate them with a virtual network. Enhancements to Storage Experience The portal now lets you register custom domain names for your Windows Azure Storage Accounts. To enable this, select a storage resource and then go to the CONFIGURE tab for a storage account, and then click MANAGE DOMAIN on the command bar: Clicking “Manage Domain” will bring up a dialog that allows you to register any CNAME you want: Summary The above features are all now live in production and available to use immediately. If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using them today. Visit the Windows Azure Developer Center to learn more about how to build apps with it. One of the other cool features that is now live within the portal is our new Windows Azure Store – which makes it incredibly easy to try and purchase developer services from a variety of partners. It is an incredibly awesome new capability – and something I’ll be doing a dedicated post about shortly. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Read the article
How to Never Use iTunes With Your iPhone, iPad, or iPod Touch

- by Chris Hoffman

iTunes isn’t an amazing program on Windows. There was a time when Apple device users had to plug their devices into their PCs or Macs and use iTunes for device activation, updates, and syncing, but iTunes is no longer necessary. Apple still allows you to use iTunes for these things, but you don’t have to. Your iOS device can function independently from iTunes, so you should never be forced to plug it into a PC or Mac. Device Activation When the iPad first came out, it was touted as a device that could replace full PCs and Macs for people who only needed to perform light computing tasks. Yet, to set up a new iPad, users had to plug it into a PC or Mac running iTunes and use iTunes to activate the device. This is no longer necessary. With new iPads, iPhones, and iPod Touches, you can simply go through the setup process after turning on your new device without ever having to plug it into iTunes. Just connect to a Wi-Fi or cellular data network and log in with your Apple ID when prompted. You’ll still see an option that allows you to activate the device via iTunes, but this should only be necessary if you don’t have a wireless Internet connection available for your device. Operating System Updates You no longer have to use Apple’s iTunes software to update to a new version of Apple’s iOS operating system, either. Just open the Settings app on your device, select the General category, and tap Software Update. You’ll be able to update right from your device without ever opening iTunes. Purchased iTunes Media Apple allows you to easily access content you’ve purchased from the iTunes Store on any device. You don’t have to connect your device to your computer and sync via iTunes. For example, you can purchase a movie from the iTunes Store. Then, without any syncing, you can open the iTunes Store app on any of your iOS devices, tap the Purchased section, and see stuff you’ve downloaded. You can download the content right from the store to your device. This also works for apps — apps you purchase from the App Store can be accessed in the Purchased section on the App Store on your device later. You don’t have to sync apps from iTunes to your device, although iTunes still allows you to. You can even set up automatic downloads from the iTunes & App Store settings screen. This would allow you to purchase content on one device and have it automatically download to your other devices without any hassle. Music Apple allows you to re-download purchased music from the iTunes Store in the same way. However, there’s a good chance you have your own music you didn’t purchase from iTunes. Maybe you spent time ripping it all from your old CDs and you’ve been syncing it to your devices via iTunes ever since. Apple’s solution for this is named iTunes Match. This feature isn’t free, but it’s not a bad deal at all. For $25 per year, Apple allows you to upload all your music to your iCloud account. You can then access all your music from any iPhone, IPad, or iPod Touch. You can stream all your music — perfect if you have a huge library and little storage on your device — and choose which songs you want to download to your device for offline use. When you add additional music to your computer, iTunes will notice it and upload it using iTunes Match, making it available for streaming and downloading directly from your iOS devices without any syncing. This feature is named iTunes Match because it doesn’t just upload music — if Apple already has a song you upload, it will “match” your song with Apple’s copy. This means you may get higher-quality versions of your songs if you ripped them from CD at a lower bitrate. Podcasts You don’t have to use iTunes to subscribe to podcasts and sync them to your devices. Even if you have a lowly iPod Touch, you can install APple’s Podcasts app from the app store. Use it to subscribe to podcasts and configure them to automatically download directly to your device. You can use other podcast apps for this, too. Backups You can continue backing up your device’s data through iTunes, generating local backups that are stored on your computer. However, new iOS devices are configured to automatically back up their data to iCloud. This happens automatically in the background without you even having to think about it, and you can restore such backups when setting up a device simply by logging in with your Apple ID. Personal Data In the days of PalmPilots, people would use desktop programs like iTunes to sync their email, contacts, and calendar events with their mobile devices. You probably shouldn’t have to sync this data form your computer. Just sign into your email account — for example, a Gmail account — on your device and iOS will automatically pull your email, contacts, and calendar events from your associated account. Photos Rather than connecting your iOS device to your computer and syncing photos from it, you can use an app that automatically uploads your photos to a web service. Dropbox, Google+, and even Flickr all have this feature in their apps. You’ll be able to access your photos from any computer and have a backup copy without any syncing required. You may still need to use iTunes if you want to sync local music without paying for iTunes Match or copy local video files to your device. Copying large local files over is the only real scenario where you’d need iTunes. If you don’t need to copy such files over, you can go ahead and uninstall iTunes from your Windows PC if you like. You shouldn’t need it.

Read the article
The Great Divorce

- by BlackRabbitCoder

I have a confession to make: I've been in an abusive relationship for more than 17 years now. Yes, I am not ashamed to admit it, but I'm finally doing something about it. I met her in college, she was new and sexy and amazingly fast -- and I'd never met anything like her before. Her style and her power captivated me and I couldn't wait to learn more about her. I took a chance on her, and though I learned a lot from her -- and will always be grateful for my time with her -- I think it's time to move on. Her name was C++, and she so outshone my previous love, C, that any thoughts of going back evaporated in the heat of this new romance. She promised me she'd be gentle and not hurt me the way C did. She promised me she'd clean-up after herself better than C did. She promised me she'd be less enigmatic and easier to keep happy than C was. But I was deceived. Oh sure, as far as truth goes, it wasn't a complete lie. To some extent she was more fun, more powerful, safer, and easier to maintain. But it just wasn't good enough -- or at least it's not good enough now. I loved C++, some part of me still does, it's my first-love of programming languages and I recognize its raw power, its blazing speed, and its improvements over its predecessor. But with today's hardware, at speeds we could only dream to conceive of twenty years ago, that need for speed -- at the cost of all else -- has died, and that has left my feelings for C++ moribund. If I ever need to write an operating system or a device driver, then I might need that speed. But 99% of the time I don't. I'm a business-type programmer and chances are 90% of you are too, and even the ones who need speed at all costs may be surprised by how much you sacrifice for that. That's not to say that I don't want my software to perform, and it's not to say that in the business world we don't care about speed or that our job is somehow less difficult or technical. There's many times we write programs to handle millions of real-time updates or handle thousands of financial transactions or tracking trading algorithms where every second counts. But if I choose to write my code in C++ purely for speed chances are I'll never notice the speed increase -- and equally true chances are it will be far more prone to crash and far less easy to maintain. Nearly without fail, it's the macro-optimizations you need, not the micro-optimizations. If I choose to write a O(n2) algorithm when I could have used a O(n) algorithm -- that can kill me. If I choose to go to the database to load a piece of unchanging data every time instead of caching it on first load -- that too can kill me. And if I cross the network multiple times for pieces of data instead of getting it all at once -- yes that can also kill me. But choosing an overly powerful and dangerous mid-level language to squeeze out every last drop of performance will realistically not make stock orders process any faster, and more likely than not open up the system to more risk of crashes and resource leaks. And that's when my love for C++ began to die. When I noticed that I didn't need that speed anymore. That that speed was really kind of a lie. Sure, I can be super efficient and pack bits in a byte instead of using separate boolean values. Sure, I can use an unsigned char instead of an int. But in the grand scheme of things it doesn't matter as much as you think it does. The key is maintainability, and that's where C++ failed me. I like to tell the other developers I work with that there's two levels of correctness in coding: Is it immediately correct? Will it stay correct? That is, you can hack together any piece of code and make it correct to satisfy a task at hand, but if a new developer can't come in tomorrow and make a fairly significant change to it without jeopardizing that correctness, it won't stay correct. Some people laugh at me when I say I now prefer maintainability over speed. But that is exactly the point. If you focus solely on speed you tend to produce code that is much harder to maintain over the long hall, and that's a load of technical debt most shops can't afford to carry and end up completely scrapping code before it's time. When good code is written well for maintainability, though, it can be correct both now and in the future. And you know the best part is? My new love is nearly as fast as C++, and in some cases even faster -- and better than that, I know C# will treat me right. Her creators have poured hundreds of thousands of hours of time into making her the sexy beast she is today. They made her easy to understand and not an enigmatic mess. They made her consistent and not moody and amorphous. And they made her perform as fast as I care to go by optimizing her both at compile time and a run-time. Her code is so elegant and easy on the eyes that I'm not worried where she will run to or what she'll pull behind my back. She is powerful enough to handle all my tasks, fast enough to execute them with blazing speed, maintainable enough so that I can rely on even fairly new peers to modify my work, and rich enough to allow me to satisfy any need. C# doesn't ask me to clean up her messes! She cleans up after herself and she tries to make my life easier for me by taking on most of those optimization tasks C++ asked me to take upon myself. Now, there are many of you who would say that I am the cause of my own grief, that it was my fault C++ didn't behave because I didn't pay enough attention to her. That I alone caused the pain she inflicted on me. And to some extent, you have a point. But she was so high maintenance, requiring me to know every twist and turn of her vast and unrestrained power that any wrong term or bout of forgetfulness was met with painful reminders that she wasn't going to watch my back when I made a mistake. But C#, she loves me when I'm good, and she loves me when I'm bad, and together we make beautiful code that is both fast and safe. So that's why I'm leaving C++ behind. She says she's changing for me, but I have no interest in what C++0x may bring. Oh, I'll still keep in touch, and maybe I'll see her now and again when she brings her problems to my door and asks for some attention -- for I always have a soft spot for her, you see. But she's out of my house now. I have three kids and a dog and a cat, and all require me to clean up after them, why should I have to clean up after my programming language as well?

Read the article
DRY and SRP

- by Timothy Klenke

Originally posted on: http://geekswithblogs.net/TimothyK/archive/2014/06/11/dry-and-srp.aspxKent Beck’s XP Simplicity Rules (aka Four Rules of Simple Design) are a prioritized list of rules that when applied to your code generally yield a great design. As you’ll see from the above link the list has slightly evolved over time. I find today they are usually listed as: All Tests Pass Don’t Repeat Yourself (DRY) Express Intent Minimalistic These are prioritized. If your code doesn’t work (rule 1) then everything else is forfeit. Go back to rule one and get the code working before worrying about anything else. Over the years the community have debated whether the priority of rules 2 and 3 should be reversed. Some say a little duplication in the code is OK as long as it helps express intent. I’ve debated it myself. This recent post got me thinking about this again, hence this post. I don’t think it is fair to compare “Expressing Intent” against “DRY”. This is a comparison of apples to oranges. “Expressing Intent” is a principal of code quality. “Repeating Yourself” is a code smell. A code smell is merely an indicator that there might be something wrong with the code. It takes further investigation to determine if a violation of an underlying principal of code quality has actually occurred. For example “using nouns for method names”, “using verbs for property names”, or “using Booleans for parameters” are all code smells that indicate that code probably isn’t doing a good job at expressing intent. They are usually very good indicators. But what principle is the code smell of Duplication pointing to and how good of an indicator is it? Duplication in the code base is bad for a couple reasons. If you need to make a change and that needs to be made in a number of locations it is difficult to know if you have caught all of them. This can lead to bugs if/when one of those locations is overlooked. By refactoring the code to remove all duplication there will be left with only one place to change, thereby eliminating this problem. With most projects the code becomes the single source of truth for a project. If a production code base is inconsistent with a five year old requirements or design document the production code that people are currently living with is usually declared as the current reality (or truth). Requirement or design documents at this age in a project life cycle are usually of little value. Although comparing production code to external documentation is usually straight forward, duplication within the code base muddles this declaration of truth. When code is duplicated small discrepancies will creep in between the two copies over time. The question then becomes which copy is correct? As different factions debate how the software should work, trust in the software and the team behind it erodes. The code smell of Duplication points to a violation of the “Single Source of Truth” principle. Let me define that as: A stakeholder’s requirement for a software change should never cause more than one class to change. Violation of the Single Source of Truth principle will always result in duplication in the code. However, the inverse is not always true. Duplication in the code does not necessarily indicate that there is a violation of the Single Source of Truth principle. To illustrate this, let’s look at a retail system where the system will (1) send a transaction to a bank and (2) print a receipt for the customer. Although these are two separate features of the system, they are closely related. The reason for printing the receipt is usually to provide an audit trail back to the bank transaction. Both features use the same data: amount charged, account number, transaction date, customer name, retail store name, and etcetera. Because both features use much of the same data, there is likely to be a lot of duplication between them. This duplication can be removed by making both features use the same data access layer. Then start coming the divergent requirements. The receipt stakeholder wants a change so that the account number has the last few digits masked out to protect the customer’s privacy. That can be solve with a small IF statement whilst still eliminating all duplication in the system. Then the bank wants to take a picture of the customer as well as capture their signature and/or PIN number for enhanced security. Then the receipt owner wants to pull data from a completely different system to report the customer’s loyalty program point total. After a while you realize that the two stakeholders have somewhat similar, but ultimately different responsibilities. They have their own reasons for pulling the data access layer in different directions. Then it dawns on you, the Single Responsibility Principle: There should never be more than one reason for a class to change. In this example we have two stakeholders giving two separate reasons for the data access class to change. It is clear violation of the Single Responsibility Principle. That’s a problem because it can often lead the project owner pitting the two stakeholders against each other in a vein attempt to get them to work out a mutual single source of truth. But that doesn’t exist. There are two completely valid truths that the developers need to support. How is this to be supported and honour the Single Responsibility Principle? The solution is to duplicate the data access layer and let each stakeholder control their own copy. The Single Source of Truth and Single Responsibility Principles are very closely related. SST tells you when to remove duplication; SRP tells you when to introduce it. They may seem to be fighting each other, but really they are not. The key is to clearly identify the different responsibilities (or sources of truth) over a system. Sometimes there is a single person with that responsibility, other times there are many. This can be especially difficult if the same person has dual responsibilities. They might not even realize they are wearing multiple hats. In my opinion Single Source of Truth should be listed as the second rule of simple design with Express Intent at number three. Investigation of the DRY code smell should yield to the proper application SST, without violating SRP. When necessary leave duplication in the system and let the class names express the different people that are responsible for controlling them. Knowing all the people with responsibilities over a system is the higher priority because you’ll need to know this before you can express it. Although it may be a code smell when there is duplication in the code, it does not necessarily mean that the coder has chosen to be expressive over DRY or that the code is bad.

Read the article
NUMA-aware placement of communication variables

- by Dave

For classic NUMA-aware programming I'm typically most concerned about simple cold, capacity and compulsory misses and whether we can satisfy the miss by locally connected memory or whether we have to pull the line from its home node over the coherent interconnect -- we'd like to minimize channel contention and conserve interconnect bandwidth. That is, for this style of programming we're quite aware of where memory is homed relative to the threads that will be accessing it. Ideally, a page is collocated on the node with the thread that's expected to most frequently access the page, as simple misses on the page can be satisfied without resorting to transferring the line over the interconnect. The default "first touch" NUMA page placement policy tends to work reasonable well in this regard. When a virtual page is first accessed, the operating system will attempt to provision and map that virtual page to a physical page allocated from the node where the accessing thread is running. It's worth noting that the node-level memory interleaving granularity is usually a multiple of the page size, so we can say that a given page P resides on some node N. That is, the memory underlying a page resides on just one node. But when thinking about accesses to heavily-written communication variables we normally consider what caches the lines underlying such variables might be resident in, and in what states. We want to minimize coherence misses and cache probe activity and interconnect traffic in general. I don't usually give much thought to the location of the home NUMA node underlying such highly shared variables. On a SPARC T5440, for instance, which consists of 4 T2+ processors connected by a central coherence hub, the home node and placement of heavily accessed communication variables has very little impact on performance. The variables are frequently accessed so likely in M-state in some cache, and the location of the home node is of little consequence because a requester can use cache-to-cache transfers to get the line. Or at least that's what I thought. Recently, though, I was exploring a simple shared memory point-to-point communication model where a client writes a request into a request mailbox and then busy-waits on a response variable. It's a simple example of delegation based on message passing. The server polls the request mailbox, and having fetched a new request value, performs some operation and then writes a reply value into the response variable. As noted above, on a T5440 performance is insensitive to the placement of the communication variables -- the request and response mailbox words. But on a Sun/Oracle X4800 I noticed that was not the case and that NUMA placement of the communication variables was actually quite important. For background an X4800 system consists of 8 Intel X7560 Xeons . Each package (socket) has 8 cores with 2 contexts per core, so the system is 8x8x2. Each package is also a NUMA node and has locally attached memory. Every package has 3 point-to-point QPI links for cache coherence, and the system is configured with a twisted ladder "mobius" topology. The cache coherence fabric is glueless -- there's not central arbiter or coherence hub. The maximum distance between any two nodes is just 2 hops over the QPI links. For any given node, 3 other nodes are 1 hop distant and the remaining 4 nodes are 2 hops distant. Using a single request (client) thread and a single response (server) thread, a benchmark harness explored all permutations of NUMA placement for the two threads and the two communication variables, measuring the average round-trip-time and throughput rate between the client and server. In this benchmark the server simply acts as a simple transponder, writing the request value plus 1 back into the reply field, so there's no particular computation phase and we're only measuring communication overheads. In addition to varying the placement of communication variables over pairs of nodes, we also explored variations where both variables were placed on one page (and thus on one node) -- either on the same cache line or different cache lines -- while varying the node where the variables reside along with the placement of the threads. The key observation was that if the client and server threads were on different nodes, then the best placement of variables was to have the request variable (written by the client and read by the server) reside on the same node as the client thread, and to place the response variable (written by the server and read by the client) on the same node as the server. That is, if you have a variable that's to be written by one thread and read by another, it should be homed with the writer thread. For our simple client-server model that means using split request and response communication variables with unidirectional message flow on a given page. This can yield up to twice the throughput of less favorable placement strategies. Our X4800 uses the QPI 1.0 protocol with source-based snooping. Briefly, when node A needs to probe a cache line it fires off snoop requests to all the nodes in the system. Those recipients then forward their response not to the original requester, but to the home node H of the cache line. H waits for and collects the responses, adjudicates and resolves conflicts and ensures memory-model ordering, and then sends a definitive reply back to the original requester A. If some node B needed to transfer the line to A, it will do so by cache-to-cache transfer and let H know about the disposition of the cache line. A needs to wait for the authoritative response from H. So if a thread on node A wants to write a value to be read by a thread on node B, the latency is dependent on the distances between A, B, and H. We observe the best performance when the written-to variable is co-homed with the writer A. That is, we want H and A to be the same node, as the writer doesn't need the home to respond over the QPI link, as the writer and the home reside on the very same node. With architecturally informed placement of communication variables we eliminate at least one QPI hop from the critical path. Newer Intel processors use the QPI 1.1 coherence protocol with home-based snooping. As noted above, under source-snooping a requester broadcasts snoop requests to all nodes. Those nodes send their response to the home node of the location, which provides memory ordering, reconciles conflicts, etc., and then posts a definitive reply to the requester. In home-based snooping the snoop probe goes directly to the home node and are not broadcast. The home node can consult snoop filters -- if present -- and send out requests to retrieve the line if necessary. The 3rd party owner of the line, if any, can respond either to the home or the original requester (or even to both) according to the protocol policies. There are myriad variations that have been implemented, and unfortunately vendor terminology doesn't always agree between vendors or with the academic taxonomy papers. The key is that home-snooping enables the use of a snoop filter to reduce interconnect traffic. And while home-snooping might have a longer critical path (latency) than source-based snooping, it also may require fewer messages and less overall bandwidth. It'll be interesting to reprise these experiments on a platform with home-based snooping. While collecting data I also noticed that there are placement concerns even in the seemingly trivial case when both threads and both variables reside on a single node. Internally, the cores on each X7560 package are connected by an internal ring. (Actually there are multiple contra-rotating rings). And the last-level on-chip cache (LLC) is partitioned in banks or slices, which with each slice being associated with a core on the ring topology. A hardware hash function associates each physical address with a specific home bank. Thus we face distance and topology concerns even for intra-package communications, although the latencies are not nearly the magnitude we see inter-package. I've not seen such communication distance artifacts on the T2+, where the cache banks are connected to the cores via a high-speed crossbar instead of a ring -- communication latencies seem more regular.

Read the article
CodePlex Daily Summary for Monday, June 02, 2014

CodePlex Daily Summary for Monday, June 02, 2014Popular ReleasesPortable Class Library for SQLite: Portable Class Library for SQLite - 3.8.4.4: This pull request from mattleibow addresses an issue with custom function creation (define functions in C# code and invoke them from SQLite as id they where regular SQL functions). Impact: Xamarin iOSTweetinvi a friendly Twitter C# API: Tweetinvi 0.9.3.x: Timelines- Added all the parameters available from the Timeline Endpoints in Tweetinvi. - This is available for HomeTimeline, UserTimeline, MentionsTimeline // Simple query var tweets = Timeline.GetHomeTimeline(); // Create a parameter for queries with specific parameters var timelineParameter = Timeline.GenerateHomeTimelineRequestParameter(); timelineParameter.ExcludeReplies = true; timelineParameter.TrimUser = true; var tweets = Timeline.GetHomeTimeline(timelineParameter); Tweets- Add mis...Sandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...Tooltip Web Preview: ToolTip Web Preview: Version 1.0Database Helper: Release 1.0.0.0: First Release of Database HelperCoMaSy: CoMaSy1.0.2: !Contact Management SystemImage View Slider: Image View Slider: This is a .NET component. We create this using VB.NET. Here you can use an Image Viewer with several properties to your application form. We wish somebody to improve freely. Try this out! Author : Steven Renaldo Antony Yustinus Arjuna Purnama Putra Andre Wijaya P Martin Lidau PBK GENAP 2014 - TI UKDWAspose for Apache POI: Missing Features of Apache POI WP - v 1.1: Release contain the Missing Features in Apache POI WP SDK in Comparison with Aspose.Words for dealing with Microsoft Word. What's New ?Following Examples: Insert Picture in Word Document Insert Comments Set Page Borders Mail Merge from XML Data Source Moving the Cursor Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.SEToolbox: 01.032.014 Release 1: Added fix when loading game Textures for icons causing 'Unable to read beyond the end of the stream'. Added new Resource Report, that displays all in game resources in a concise report. Added in temp directory cleaner, to keep excess files from building up. Fixed use of colors on the windows, to work better with desktop schemes. Adding base support for multilingual resources. This will allow loading of the Space Engineers resources to show localized names, and display localized date a...ClosedXML - The easy way to OpenXML: ClosedXML 0.71.2: More memory and performance improvements. Fixed an issue with pivot table field order.Vi-AIO SearchBar: Vi – AIO Search Bar: Version 1.0Top Verses ( Ayat Emas ): Binary Top Verses: This one is the bin folder of the component. the .dll component is inside.Traditional Calendar Component: Traditional Calender Converter: Duta Wacana Christian University This file containing Traditional Calendar Component and Demo Aplication that using Traditional Calendar Component. This component made with .NET Framework 4 and the programming language is C# .SQLSetupHelper: 1.0.0.0: First Stable Version of SQL SetupComposite Iconote: Composite Iconote: This is a composite has been made by Microsoft Visual Studio 2013. Requirement: To develop this composite or use this component in your application, your computer must have .NET framework 4.5 or newer.Magick.NET: Magick.NET 6.8.9.101: Magick.NET linked with ImageMagick 6.8.9.1. Breaking changes: - Int/short Set methods of WritablePixelCollection are now unsigned. - The Q16 build no longer uses HDRI, switch to the new Q16-HDRI build if you need HDRI.fnr.exe - Find And Replace Tool: 1.7: Bug fixes Refactored logic for encoding text values to command line to handle common edge cases where find/replace operation works in GUI but not in command line Fix for bug where selection in Encoding drop down was different when generating command line in some cases. It was reported in: https://findandreplace.codeplex.com/workitem/34 Fix for "Backslash inserted before dot in replacement text" reported here: https://findandreplace.codeplex.com/discussions/541024 Fix for finding replacing...VG-Ripper & PG-Ripper: VG-Ripper 2.9.59: changes NEW: Added Support for 'GokoImage.com' links NEW: Added Support for 'ViperII.com' links NEW: Added Support for 'PixxxView.com' links NEW: Added Support for 'ImgRex.com' links NEW: Added Support for 'PixLiv.com' links NEW: Added Support for 'imgsee.me' links NEW: Added Support for 'ImgS.it' linksToolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2014.5.28): XrmToolbox improvement XrmToolBox updates (v1.2014.5.28)Fix connecting to a connection with custom authentication without saved password Tools improvement New tool!Solution Components Mover (v1.2014.5.22) Transfer solution components from one solution to another one Import/Export NN relationships (v1.2014.3.7) Allows you to import and export many to many relationships Tools updatesAttribute Bulk Updater (v1.2014.5.28) Audit Center (v1.2014.5.28) View Layout Replicator (v1.2014.5.28) Scrip...Microsoft Ajax Minifier: Microsoft Ajax Minifier 5.10: Fix for Issue #20875 - echo switch doesn't work for CSS CSS should honor the SASS source-file comments JS should allow multi-line comment directivesNew Projects[ISEN] Rendu de projet Naughty3Dogs - Pong3D: Pong3D est un jeu qui reprend le principe classique du Pong en le portant dans un environnement 3D à l'aide du langage c# et du moteur Unity3DBootstrap for MVC: Bootstrap for MVC.F. A. Q. - Najczesciej zadawane pytania: FAQForuMvc: Technifutur short projecthomework456: no.iStoody: Studies organize solution, available through app for Windows and Windows Phone.liaoliao: ???????????Price Tracker: Allows a user to track prices based on parsed emailsRoslynEval: RoslynRx Hub: Rx Hub provides server side computation which initiate by subscriber requestSharepoint Online AppCache Reset: We are an IT resource company providing Virtual IT services and custom and opensource programs for everyday needs. UnitConversionLib : Smart Unit Conversion Library in C#: Conversion of units, arithmetic operation and parsing quantities with their units on run time. Smart unit converter and conversion lib for physical quantities,

Read the article
Moving from Tortoise to TFS

- by MarkPearl

The Past A few years ago my small software company made the jump from storing code on a shared folder to source code control. At the time we had evaluated a few of the options and settled on Tortoise SVN. The main motivation for going the SVN route was that we found a great plugin for Visual Studio that allowed us to avoid the command prompt for uploading changes (like I said we are windows programmers… command prompt bad!! ) and it was free. Up to now we have been pretty happy with SVN as it removed many of the worries that I had about how safe my code was on a shared folder and also gave us the opportunity to safely have several developers work on the same project at the same time. The only times when we have been unhappy has been when we have had SVN hell days – which pretty much occur when you are doing something out of the norm and suddenly SVN just won’t resolve conflicts or something along those lines. This happens once every 4 or 5 months and is not necessarily a problem caused directly by SVN – but a problem augmented by SVN. When you have SVN hell days you want to curse SVN! With that in mind I recently have been relooking at our source code control. I have explored using GIT and was very impressed by it and have also looked at TFS. From a source code control perspective I don’t want to get into a heated discussion on which one is better – but I do want to mention that I wear two hats in my organization – software developer & manager, and with the manager hat on I tend to sway the TFS route. So when I was given a coupon to test DiscountASP.Net Team Foundation Server Service for a year, I thought it was the perfect opportunity to try TFS in a distributed environment and also make the first step towards having an integrated development management system. Some of the things that appeal to me about DiscountASP’s offering are the following… Basic management / planning facilities like to do lists inside Visual Studio Daily backup of data on the server – we are developers, not IT managers and so the more of this I could outsource the better Distributed solution – all of us work remotely and so this was a big one as well. Registering and Setting Up with DiscountASP.NET The whole registration process was simple and intuitive. The web interface is not the most visually impressive one, but it is functional and a few seconds after I clicked the last submit button a email was sitting in my inbox giving me my control panel username and suggesting that I read the “Getting Started” article. The getting started article was easy to read and understand so no complaints there either. Next to set my dev environment to work. With a few references to the getting started article I had completed the whole setup process in a matter of minutes. Ten minutes after initiating the whole thing I was logged into VS2010 and creating my first TFS project. With the service that I signed up for, I have access for 5 users – which is sufficient for my internal needs. So from what I can tell, to set the rest of us up on the system I just need to supply them with their user credentials and url. My Concerns Resolved 1) Security So, a few concerns I had about the service. First and foremost – is it secure? I would hate for someone to get access to our code and the whole idea of putting it up on the internet is a concern for me. Turning to the Knowledge Base on the DiscountASP website this is one of the first question I can see answered. According to them it is secure. I have extracted their comment below regarding this. Our TFS hosting service is secure. We only accept HTTPS connections ensuring that any client-server data transmission is encrypted. At the network level, all of our systems are protected by multiple Juniper firewalls, Tipping Point's Intrusion Detection System (see Tipping Point's case study of our use here), and we also employ DDoS mitigation to add extra layers of security. Additionally, physical access to the servers is tightly restricted. Please see the security section of this Knowledge Base article for further details. 2) Web Portal Access The other big concern I have is regarding web portal access. In the ideal world I would like to be able to give my end users access to a web portal for reporting bugs etc. When I initially read through the FAQ of the site it mentioned that there was web portal access – but from what I can see this is just for “users”. Since I am limited to 5 users for the account, it would not be practical to set up external users that we could get feedback from on bugs etc. I would be interested if this is possible – and if so if someone could post it in the comments it would be much appreciated. If this isn’t possible, it is a slight let down as we rely heavily on end user feedback to get feedback and it would have been ideal to have gotten this within the service. Other than those two items, I didn’t have any real concerns that were unresolved. So where do I go from here? So time passed by from the initial writing of this post and as work whirred in and out of my inbox I have still not had a proper opportunity to give the service a test run. Recently though things have began to slow down and then surprise surprise I had another SVN Hell day. With that experience I had a new found resolve to get our team on TFS and so today we are going to start to use the service as a team. I am hoping that I do not have TFS hell days – but if I do, I will be sure to write about them. In short - the verdict is still out on whether this service is going to be invaluable to my business or whether it will create more headaches than it is worth BUT I am hopping it will be an invaluable service. I will only really be able to determine that in a few months… till then!

Read the article
How to Identify Which Hardware Component is Failing in Your Computer

- by Chris Hoffman

Concluding that your computer has a hardware problem is just the first step. If you’re dealing with a hardware issue and not a software issue, the next step is determining what hardware problem you’re actually dealing with. If you purchased a laptop or pre-built desktop PC and it’s still under warranty, you don’t need to care about this. Have the manufacturer fix the PC for you — figuring it out is their problem. If you’ve built your own PC or you want to fix a computer that’s out of warranty, this is something you’ll need to do on your own. Blue Screen 101: Search for the Error Message This may seem like obvious advice, but searching for information about a blue screen’s error message can help immensely. Most blue screens of death you’ll encounter on modern versions of Windows will likely be caused by hardware failures. The blue screen of death often displays information about the driver that crashed or the type of error it encountered. For example, let’s say you encounter a blue screen that identified “NV4_disp.dll” as the driver that caused the blue screen. A quick Google search will reveal that this is the driver for NVIDIA graphics cards, so you now have somewhere to start. It’s possible that your graphics card is failing if you encounter such an error message. Check Hard Drive SMART Status Hard drives have a built in S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) feature. The idea is that the hard drive monitors itself and will notice if it starts to fail, providing you with some advance notice before the drive fails completely. This isn’t perfect, so your hard drive may fail even if SMART says everything is okay. If you see any sort of “SMART error” message, your hard drive is failing. You can use SMART analysis tools to view the SMART health status information your hard drives are reporting. Test Your RAM RAM failure can result in a variety of problems. If the computer writes data to RAM and the RAM returns different data because it’s malfunctioning, you may see application crashes, blue screens, and file system corruption. To test your memory and see if it’s working properly, use Windows’ built-in Memory Diagnostic tool. The Memory Diagnostic tool will write data to every sector of your RAM and read it back afterwards, ensuring that all your RAM is working properly. Check Heat Levels How hot is is inside your computer? Overheating can rsult in blue screens, crashes, and abrupt shut downs. Your computer may be overheating because you’re in a very hot location, it’s ventilated poorly, a fan has stopped inside your computer, or it’s full of dust. Your computer monitors its own internal temperatures and you can access this information. It’s generally available in your computer’s BIOS, but you can also view it with system information utilities such as SpeedFan or Speccy. Check your computer’s recommended temperature level and ensure it’s within the appropriate range. If your computer is overheating, you may see problems only when you’re doing something demanding, such as playing a game that stresses your CPU and graphics card. Be sure to keep an eye on how hot your computer gets when it performs these demanding tasks, not only when it’s idle. Stress Test Your CPU You can use a utility like Prime95 to stress test your CPU. Such a utility will fore your computer’s CPU to perform calculations without allowing it to rest, working it hard and generating heat. If your CPU is becoming too hot, you’ll start to see errors or system crashes. Overclockers use Prime95 to stress test their overclock settings — if Prime95 experiences errors, they throttle back on their overclocks to ensure the CPU runs cooler and more stable. It’s a good way to check if your CPU is stable under load. Stress Test Your Graphics Card Your graphics card can also be stress tested. For example, if your graphics driver crashes while playing games, the games themselves crash, or you see odd graphical corruption, you can run a graphics benchmark utility like 3DMark. The benchmark will stress your graphics card and, if it’s overheating or failing under load, you’ll see graphical problems, crashes, or blue screens while running the benchmark. If the benchmark seems to work fine but you have issues playing a certain game, it may just be a problem with that game. Swap it Out Not every hardware problem is easy to diagnose. If you have a bad motherboard or power supply, their problems may only manifest through occasional odd issues with other components. It’s hard to tell if these components are causing problems unless you replace them completely. Ultimately, the best way to determine whether a component is faulty is to swap it out. For example, if you think your graphics card may be causing your computer to blue screen, pull the graphics card out of your computer and swap in a new graphics card. If everything is working well, it’s likely that your previous graphics card was bad. This isn’t easy for people who don’t have boxes of components sitting around, but it’s the ideal way to troubleshoot. Troubleshooting is all about trial and error, and swapping components out allows you to pin down which component is actually causing the problem through a process of elimination. This isn’t a complete guide to everything that could likely go wrong and how to identify it — someone could write a full textbook on identifying failing components and still not cover everything. But the tips above should give you some places to start dealing with the more common problems. Image Credit: Justin Marty on Flickr

Read the article

Search Results

Search found 5413 results on 217 pages for 'git pull'.

Page 207/217 | < Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214 | Next Page >

- by Chris Hoffman

- by Eric Z Goodnight

- by jorg

- by arungupta

- by Robz / Fervent Coder

- by Geordie

- by Rick Strahl

- by martin.abrahams

- by Trki

- by zowens

- by SQLOS Team

- by James Michael Hare

- by red(at)work

- by Charles Young

- by Kyle Burns

- by Javier Treviño

- by ScottGu

- by Chris Hoffman

- by BlackRabbitCoder

- by Timothy Klenke

- by Dave

- by MarkPearl

- by Chris Hoffman

< Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214 | Next Page >