Search Results

Search found 11093 results on 444 pages for 'issues'.

Page 207/444 | < Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >

• NTP configuration not recognized?

  - by Eugene S

  I'm trying to configure NTP on my machine but it seems that the parameters I set are not being read by the system. Below is my /etc/ntp.conf file. (I applied the most basic configuration to eliminate other issues) server 10.45.68.47 server 127.0.0.1 After I set the above configuration, I restart the ntpd process by doing the following: service ntpd restart And then I get the following output: Shutting down ntpd: [ OK ] ntpd: Synchronizing with time server: [FAILED] Starting ntpd: [ OK ] Moreover, I can see the following in /var/etc/messages: Apr 2 10:54:07 hsystem1a ntpd[21067]: ntpd exiting on signal 15 Apr 2 10:54:07 hsystem1a ntpdate[21537]: can't find host ntpServer1 Apr 2 10:54:07 hsystem1a ntpdate[21537]: can't find host ntpServer2 Apr 2 10:54:07 hsystem1a ntpdate[21537]: no servers can be used, exiting So it seems that the ntpServer1 and the ntpServer2 are being read from somewhere instead of the IPs I configured in /etc/ntp.conf. NOTE: I done init 6 on the machine just in case. Thanks!

  Read the article

• Does PCI bus really occupy 1.8GB

  - by Neil

  I am using a Dell Vostro 1700 laptop which currently has 2GB of RAM. I was considering buying some more memory to upgrade it to 4GB. I am running 32 bit Windows Vista and I know that there can be issues that prevent it from making use of a full 4GB which I believe relate to the fact that memory mapped devices, e.g. graphics card, also need to be allocated addresses in the 4GB range addressable with 32 bits. Consequently I was looking at device manager - resources by connection - memory to see what devices where allocated what memory addresses. I was surprised to see that there was an entry for [80000000 - F3FFFFFF] PCI bus. That is a 1.8GB range of addresses. When I expanded it the only thing in it was [E0000000 - EFFFFFFF] NVIDIA GeForce 8600M GT which is only 256MB. So my question is does the PCI bus really occupy 1.8GB of address space and will it prevent my computer from making use of any more memory than it already has.

  Read the article

• Activating Sharepoint Server Publishing Infrastructure returns "Column Limit Exceeded"

  - by Haydar

  I am getting the following error when attempting to activate the Sharepoint Server Publishing Infrastructure. There are only about 140 columns defined in the entire site collection. I had previously activated and subsequently deactivated this feature. I don't know whether this might be causing the problem. But I really have no idea. I am a developer and this is my first question on serverFault. Please be gentle. Error Message: Column Limit Exceeded. There are too many columns of the specified data type. Please delete some other columns first. Note that some column types like numbers and currency use the same data type. Troubleshoot issues with Microsoft SharePoint Foundation. Correlation ID: 2ec9ae3a-5464-4922-9760-874099f51420 Date and Time: 11/8/2010 3:43:44 PMDate and Time: 11/8/2010 3:43:44 PM

  Read the article

• web sites leaking memory? IIS 7.5 Windows server 2008 R2

  - by Charles

  I have several web sites on my windows 2008 server that have been working flawlessly for over a year. Just a few days ago I ran into an issue where my server stopped serving up pages on some of these sites for no apparent reason. I dug into it a little more today and I see that some of my sites (they're all asp.net mvc 3.0 sites), are consuming over 460MB of memory. Like I said, this just started the other day after a very long period of time of no issues at all. I have two questions: 1) is there a way to throttle how much memory is consumed by the w3wp process before I can force it to restart (restart the app pool for a particular site) so that it doesn't keep hogging all of the memory? 2) any ideas what could have caused this to start happening?

  Read the article

• Virtualbox, merging snapshots and base disk

  - by Henrik

  Hi, I have a virtual machine with about 30 snapshots in branches. The current development path is 22 snapshots plus the base disk. The amount of files is seemingly having an impact now on IO and the dev laptop I'm using (don't know if it is host disk performance issues with the 140GB total size over a lot of fragments, or just the fact that it is hitting sectors distributed across a lot of files). I would like to merge the current development branch of snapshots together with the base disk, but I am unsure if the following command would produce the correct outcome. I am not able to boot this disk after the procedure completes (5-6 hours). vboxmanage clonehd "C:\VPC-Storage\.VirtualBox\Machines\CRM\Snapshots\{245b27ac-e658-470a-b978-8e62137c33b1}.vhd" "E:\crm-20100624.vhd" --format VHD --type normal Could anyone confirm if this is the correct approach or not?

  Read the article

• How do I set the TEMP environment variable for the "Network Service" user?

  - by Chris Phillips

  We have a system that uses Path.GetTempFile and Path.GetTempPath calls to work with temporary files fairly frequently. This system also runs as the "Network Service" user. We're finding that we're running out of room on the C drive (for other issues, our temp files are cleaned up correctly) and would like to be able to move the temp directory to a different drive. The easiest solution to this seems to be to change the TMP or TEMP environment variables for the Network Service user, but I only seem to be able to set my own user or the "system" variables that are overwritten by the Network Service user profile. How do I set these variables for the Network Service user?

  Read the article

• Active Directory password update not recognized on OS X 10.7.3?

  - by eaj

  We have a few Macs in our office which are bound to our Active Directory (Server 2k8R2) domain for login authentication and access to file shares. For the most part this has worked without trouble. I recently changed my AD password (from the Windows box that is my main desktop machine), and my iMac still wants my old password for logins—even after a reboot. It correctly prompts for the new password when I attempt to connect to Windows smb file shares. The last time I changed my password, the iMac was running Snow Leopard and picked up the password change as expected. I'm a little bit of an OS X n00b, so I apologize if this should be obvious. My searching has turned up numerous issues people have had with Lion and Active Directory, but not this particular problem. Possibly related, we do have mobile accounts enabled for AD in the Directory Utility options. I assume this causes credentials to be cached locally, but it's not clear to me how to get them to update.

  Read the article

• How do I setup PHP locally on Windows 7 with Tomcat 7 already installed?

  - by James Drinkard

  I have Windows 7 64 bit running on my laptop with Tomcat 7 installed to run my java programs using Eclipse. Now I need to be working with PHP and as I went to install it, I read you need to install Apache Web Server first, before installing PHP. Then I read where you can run PHP under Tomcat or run PHP on Apache Web Server while still using Tomcat, if you reset the default port on one of them as Tomcat and Apache Web Server would use the same ports by default. What is the best way to do this? I don't want to was lots of time getting stuck on configuration issues.

  Read the article

• 503 jrun servlet error

  - by tonedigital

  I'm having issues with my ColdFusion 9 server, it continuously keeps crashing. When I go to a web page from my application I am getting a "503 Jrun Servlet Error". Does anyone have any clue to why this is happening? It appears that my memory is being consumed greatly and causing my server to crash. I read somewhere about setting this setting to false "cfset This.Clientmanagement="false"". Any ideas about any of this? All suggestions would be a tremendous help. Thanks much. tone

  Read the article

• No External Sound

  - by Walter

  I have ubuntu 9.10. Headphones appear to work fine. External speakers - nothing. There are so many sound preferences I have no idea what or which combination. Went to terminal did alsamixer seems to recognize my soundcard, though the driver is not listed in system - admin -hardware drivers, the only driver listed is my graphics card. I have tried several forums and it seems no one is interested in responding to sound issues. Here's hoping it is different here.

  Read the article

• Server drives: 2.5" SCSI less reliable than 3.5" ?

  - by Bill

  Just had an HP 2.5" SAS 10k drive fail on a RAID5 array after about 2.5 years. It made me wonder if this was a fluke or an indication that 2.5" drives are less reliable than 3.5" SAS drives. I've had many 3.5" SAS drives running for many years without any issues (knock on wood). I would think that smaller drives would generate less heat and therefore be more reliable, but couldn't find any evidence of this. I realize all drives will eventually fail and that it's a crap shoot with any particular model, but was hoping someone could point out some related studies or comment on the SCSI drive sizes they've found to be most reliable in servers. Thanks.

  Read the article

• Ubuntu Server Edition (Jaunty) x64 Segmentation faults in PHP mysql package

  - by Deeksy

  I've been running Jaunty with Apache2, PHP & MySQL running drupal websites as well as python 2.6 and trac on the same server. I'm getting quite a few segmentation faults and suhosin warnings on my drupal websites which don't seem to be related to the amount of RAM the server has (3GB) as the trac site is running happily without issues. The issue seems to be related to PHP accessing mysql and I'm getting suhosin warnings. Has anyone else seen this problem? Any ideas on how to fix it? Funnily enough, it's not a consistent error, as restarts tend to fix the issue temporarily.

  Read the article

• Cisco 2900 series router - 3x 3g HWIC - Can you use the same subnet for each HWIC?

  - by Lance

  We host a site with a 2900 series router with 3x 3G-HWIC cards installed. It is hosted with telstra and plugs into our corporate WAN. The card authenticates against radius and advertises a route into the WAN for which subnet it routes for. We have always used the same advertised subnet on each. Telstra have advised us that this could be the cause of some drop out issues whereby some services will work for some people and not for others and are saying effectively that their system will only use one of these at a time even though we can see the interface is online and assigned a WAN IP address. Has anyone out there configured a multi HWIC setup before and if so are they using different subnets for each or the same?

  Read the article

• Data recovery after user profile corruption on Windows XP

  - by m68z8mi

  I'm away from home for college, and my computer back home has been having some issues. My dad took it to a computer store, and apparently the user profiles somehow got corrupted, so they're locked out of the computer. This is a Windows XP box, but I changed the default administrator account password, so that backdoor isn't a possibility. Now, that computer's HDD has a whole bunch of data on it which my dad would hate to lose, so I suggested that they take the HDD out, plug it into some other computer, and just copy all the data off that way (keeping in mind that the data itself wasn't encrypted). However, the computer store people said that wouldn't be possible unless they had the administrator account password (which I can't remember for the life of me), and that they'd either have to reformat and reinstall Windows, or else use some complicated sounding recovery process costing a decent amount of money. That sounds like complete BS to me, but I'm not 100% sure about it, so I thought I'd get some more opinions. Could someone more knowledgeable about this stuff suggest a good course of action to take?

  Read the article

• Choosing a monitoring system for a dynamically scaling environment: Nagios v. Zabbix

  - by wickett

  When operating in the cloud and scaling boxes automatically, there are certain monitoring issues that one experiences. Sometimes we might be monitoring 10 boxes and sometimes 100. The machines will scale up and down based on a demand. Right now, I think the best solution to this is to choose a monitoring solution that will instantiation of targets via calls to an API. But, is this really the best? I like the idea of dynamic discovery, but that is also a problem in the cloud seeing that the targets are not all in the same subnet. What monitoring solutions allow for a scaling environment like this? Zabbix currently has a draft API but I have been unable to fund a similar API for Nagios. Is there a similar API for Nagios? Anyone have any alternate suggestions besides Nagios and Zabbix?

  Read the article

• Windows 7: blue faces in VLC... sometimes

  - by Mala

  There are a bunch of forum posts about this issue from the last several years but no resolution that I could find. I have the newest VLC installed on Windows 7 with the newest nvidia drivers. Suddenly, VLC plays some videos in such a way as faces are blue. When viewed in another media player, or when looking at the thumbnails, this is not an issue. Other videos are not affected. I've tried resetting VLC options, deleting the VLC folder in the AppData area, etc. I have no other color issues. Does anyone have a fix?

  Read the article

• Can't connect to the internet in Windows Vista

  - by Kola

  I have a Windows Vista computer which i have used for about 2 years without any issues. Recently, i started having problems connecting to the internet with this Vista computer. My other XP Computers are fine and can connect to the Internet. Regardless of wired or wireless connection, i am unable to get the Vista computer connected to the web. The Status remains "Limited" for IPv4 and IPv6. It also shows unidentified Public Network, and is able to connect to the router. However, there's a disconnection between the router and the internet. Any help will be greatly appreciated, i have been on this for 4 weeks now.

  Read the article

• Windows: Should I install Server or stick with regular?

  - by stalker92

  I hope somebody can help me solve my dilemma. I have my home PC (using Windows 7) which I use for both work and leisure (gaming, surfing, movies etc.) I tend to never turn it off, only when I must reboot because some installation requires me to or when the power gets lost. But, sometimes Windows starts acting weird (usually after the long period of system uptime), per example eats up randomly all the space on my system partition etc. which is solved after the reset by itself. I was thinking to switch to Windows Server, I guess that it is more optimized for long uptime, well, obviously it is meant for use on servers. Can somebody with more experience with this help me decide is it worth it, will it solve these issues connected with long uptime periods? Thanks in advance.

  Read the article

• Can't use HTTPS with ServerXMLHTTP object

  - by Imraan

  I am supporting a Classic ASP application that connects to a payment gateway via HTTPS. Up until recently there have been no issues. A few days ago this broke without the code, IIS config or anything local changing. Its broken on at least 3 separate servers. The last run of Windows Updates was in late November, but bringing the servers' updates up date has not resolved the problem. A code snippet is below. Dim oHttp Dim strResult Set oHttp = CreateObject("MSXML2.ServerXMLHTTP") oHttp.setOption 2, 13056 oHttp.open "POST", SOAP_ENDPOINT, false oHttp.setRequestHeader "Content-Type", "application/soap+xml; charset=utf-8" oHttp.setRequestHeader "SOAPAction", SOAP_NS + "/" & SOAP_FUNCTION oHttp.send SOAP_REQUEST Below is a dump of the error object :- Number: -2147012852 Description: A certificate is required to complete client authentication Message: A certificate is required to complete client authentication I initially posted the question on Stackoverflow (http://stackoverflow.com/questions/9212985/cant-use-https-with-serverxmlhttp-object) thinking it was a code issue, but further investigation seems to point to a server issue.

  Read the article

• Xen VGA passthrough: is it possible to have dual GPU's with single monitor

  - by user489481

  I hate dual-booting between Windows when I want to play a game and Linux when I need to work. I don't fancy running Linux in a VM and Wine almost never works for me. So, I'm thinking about buying a new mainboard and CPU that is compatible with Xen's VGA passthrough and HVM virtualization. I want to be able to switch between the Linux Dom0 and Windows DomU with ease, but the problem is I need two GPU's and have only one monitor. Right now I have a nVidia GTX 260 in my PC, but I also have a Radeon 4850 sitting in my closet that I was going to sell. My question is, can I salvage the Radeon card to run the Dom0 and have the nVidia card run the DomU while having some kind of device/software to connect them a single monitor? Power supply and airflow issues aside. If not, what would you suggest? Is this even possible?

  Read the article

• Windows PC's Intermittant Network faults.

  - by Kristiaan

  Hello everyone, im running into some issues with our client PC's (windows xp sp3 systems). this morning we ran into some problems with PC's not connecting to internal / external systems intermittantly. this would manifest as a problem connecting to any service, email, web, backoffice database systems etc. given a random amount of time be it a few minutes etc the problem would disapear and the pc would carry on as normal, some systems however have not been able to connect to certain sytems since the problem initally happened. im hoping for some suggestions / network diag advice really to help me locate the cause of this problem. all the clients are windows xp, connecting to a domain controller that is windows 2003 std this server also acts as a DNS server for us. we also have websense 7.0.1 installed on it to filter traffic.

  Read the article

• I am trying to setup phpMyAdmin to use with a remote MySQL databases on Scientific Linux release 6.2

  - by techsjs2012

  I am trying to setup phpMyAdmin to use with a remote MySQL databases on Scientific Linux release 6.2. If I use the mysql command line to connect to the remote database it works great but if I use mysqladmin I am getting "#2002 Cannot log in to the MySQL server". I have found if I do a: setenforce 0 It will work from myphpadmin to my remote database but once I reboot or set Scientific Linux setenforce back to one it stops working again.. I know setenforce 0 is not the right thing to do but can someone please give me details steps on how to get this working the right way... thanks I am new to Scientific Linux and been having some issues.. thanks

  Read the article

• Windows 8.1 will not boot after upgrading from Windows 8 on my PC

  - by user266969

  I have not found a fix. After running the Windows 8.1 Update from the store my computer will not boot unless In insert my recovery USB drive and try to repair. (The repair fails.) However after I power of the PC and remove the USB drive. The PC will boot correctly once. I would leave the PC on but it shuts it self off at night. (And yes I have checked my power profile, it is set to never.) The only thing I have found online is a possibly corrupt video driver. I uninstalled the video driver reboot and it did not fix the issue. Anybody have any suggestions? The PC is a HP EliteBook 8730w laptop. I had no issues with Windows 8 or the Windows 8.1 preview.

  Read the article

• How can I make the Outlook "To" field allow auto completion for all my contacts?

  - by Space Cracker

  When we make a new mail message in Outlook 2007 and try to write any letter in To field it shows an auto complete list with all available contacts that contain written letters. This list is displaying all emails that you have send to them before and over time this list grows as you send to more and more new contacts... My Issues: When we reinstall Windows, install new copy of Outlook, create a new mail message, try to write any character in To field it will not show any contacts and this leads to write it or choose from contacts. Is it in any way possible to make Outlook's contacts, or specific contacts I determine to be cached, appear in TO when I write any letter without need to write them again?

  Read the article

• suddenly can't connect to Windows 7 PC from xbmc

  - by Damon

  I have xbmc installed on a softmodded classic xbox and all of a sudden I cannot connect to the shared folders on my Windows 7 PC. Well, it can connect but it wants a username and password, but none exist on my computer. It's been several weeks since I last used it, but it was working fine then! and no particular changes I can think of aside from I guess a few Windows updates. I've seen reference online to Windows Live essentials causing issues with file sharing, but I don't even have that installed. And I made sure to tick 'turn off password protected sharing' in my advanced network setup. I had the guest account turned off and working fine before, and tried turning it on but no luck. I can access my shared folders fine from other Computers and a ps3. I've read a couple threads of similar situations on various folders and none of their solutions have worked.

  Read the article

< Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >