Search Results

Search found 7875 results on 315 pages for 'wired networking'.

Page 21/315 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

  • Wireless card overheating?

    - by Sidney
    Ok, so I've had my laptop for several years (I wanna say 4, but possibly more), it's a Toshiba Satellite. I'm running Linux mint 15, and am having a strange new issue, after several hours of running my wireless stops. It can SEE wireless networks, but refuses to connect to any of them. (On a sidenote, connecting to a router with a cable at this point works fine) The fact that it can SEE the networks make me think the card is in good condition, and it's software related The fact that it works for several hours before booting me makes me think perhaps the transmitter is getting too hot. I don't use my laptop in dusty environments, and keep it on an elevated surface (alternatively, I actively try not to let it sit on soft surfaces where the vents get covered). I spray out the cpu fan about once a year with compressed air about once a year, so I really don't think the insides should be too dirty. Finally, unfortunately, sensors only gives me CPU temps, but they run about 40-50 degrees C, which from my understanding is perfectly normal for an I3. Does anyone have any suggestions on what I can do to determine the root cause of this?

    Read the article

  • some websites not opening completely

    - by mkk
    Hi everybody, I am using bsnl broadband connection, modem: wa3002g1 os: xp(86x) / vista(64x) A few days back I have changed the modem (don't know the previous modem no) because of some issues. since then I am not able to open most of the websites in firefox, IE6/8, chrome, opera. If i connect with other network like reliance data card, those websites are opening, if i connect bsnl the problem will be same again. I called to customer care many times, but no use. Please help me to find the solution. Thank you in advance.

    Read the article

  • No Other User In Task Manager Users Tab Windows 7

    - by Samuel Adam
    I want to ask why there is only me on Task Manager's Users tab. Originally I wanted to be able to chat with other clients on my local network using msg command, but I can't found any other user. How to see other users on the same network? I use Work Network, and all of the users is using wifi to connect. I googled about it, but no information is close enough. As much as a newbie question it sounded, I really appreciate any help. Thank you ! :)

    Read the article

  • tcp handshake failed.client send rst (after syn-ack). can any one advice?

    - by user1495181
    architecture: 2 linux computer connected . on the second (192.168.1.1) one run apache server . I have a small program that take tcp packets from nfqueue change the dst ip to 192.168.1.1 in case that the dst ip is 192.168.1.2 (i know that i can do it with iptables , but my program will do more things in the future), fix check sum and return to the queue. if i call to telnet 192.168.1.1 , means that my program dosnt need to do any manipulation, handshake is OK. If i call to telnet 192.168.1.2 , my program change the dest. server get the syn and return syn-ack, but right after getting the syn-ack the client send rst. Can anyone advice? wireshark of the telnet tcpdump of the telenet above

    Read the article

  • port forwarding/network settings preventing from game hosting

    - by Xitcod13
    I asked where to post this question on stackoverflow meta and they directed me here. Im on wireless connection and I want to host games in StarCraft: Brood War and i've been looking everywhere on how to accomplish that. My internet is amazingly fast so its not an internet problem (and when i play other peoples games dont experience lag) I found out that i need to have a static IP but I have already checked that i do (i downloaded a program to make my id static and it already was; The program asked for which router I used So i think it checked the router settings already) I found out that i need to allow Sc access through the firewall which i already did (i have zone-alarm but I allowed it everything possible except receiving emails lol) I have recently noticed that few people actually can join my games but most of them cannot. I dont know whats going on here. I really want to be able to host games overall how do I go about checking what is wrong with the network. Update: Alright I figured out what i did wrong in the first part I did not actually set up forwarding on the router -.- I have tried to fix my mistake. I went to forwarding options in my router (as this guide for my specific router suggests) but when i click ok I get a message incorrect ip address. 192.168.1.1 is my routers address. The default address that appears there is 192.168.1 (blank) I have set it to my computers current Ip4 adress which 192.168.1.23 I hope this works If so i will post it as an answer and mark it.

    Read the article

  • A proper way to create non-interactive accounts?

    - by AndreyT
    In order to use password-protected file sharing in a basic home network I want to create a number of non-interactive user accounts on a Windows 8 Pro machine in addition to the existing set of interactive accounts. The users that corresponds to those extra accounts will not use this machine interactively, so I don't want their accounts to be available for logon and I don't want their names to appear on welcome screen. In older versions of Windows Pro (up to Windows 7) I did this by first creating the accounts as members of "Users" group, and then including them into "Deny logon locally" list in Local Security Policy settings. This always had the desired effect. However, my question is whether this is the right/best way to do it. The reason I'm asking is that even though this method works in Windows 8 Pro as well, it has one little quirk: interactive users from "User" group are still able to see these extra user names when they go to the Metro screen and hit their own user name in the top-right corner (i.e. open "Sign out/Lock" menu). The command list that drops out contains "Sign out" and "Lock" commands as well as the names of other users (for "switch user" functionality). For some reason that list includes the extra users from "Deny logon locally" list. It is interesting to note that this happens when the current user belongs to "Users" group, but it does not happen when the current user is from "Administrators". For example, let's say I have three accounts on the machine: "Administrator" (from "Administrators", can logon locally), "A" (from "Users", can logon locally), "B" (from "Users", denied logon locally). When "Administrator" is logged in, he can only see user "A" listed in his Metro "Sign out/Lock" menu, i.e. all works as it should. But when user "A" is logged in, he can see both "Administrator" and user "B" in his "Sign out/Lock" menu. Expectedly, in the above example trying to switch from user "A" to user "B" by hitting "B" in the menu does not work: Windows jumps to welcome screen that lists only "Administrator" and "A". Anyway, on the surface this appears to be an interface-level bug in Windows 8. However, I'm wondering if going through "Deny logon locally" setting is the right way to do it in Windows 8. Is there any other way to create a hidden non-interactive user account?

    Read the article

  • How to make Windows 7 use the internet connection that I specify

    - by user138957
    I have a LAN adapter and a USB wireless internet connection. When both connected windows 7 always uses the USB. I tried changing the metric values but no luck. Let me explains the steps I took. Currently automatic metric on all adapters. LAN connected. ipconfig shows that it is connected to the correct ip/dns/gateway etc. IPv4 Route table shows Metric 24 Then connected USB. ipconfig shows USB connectivity then LAN in that order. Internet is now through USB. IPv4 Route table shows Metric 4249 for LAN and USB is 41. Gateway for USB shows "on-link". netstat -rn shows USBDEVICE on top. Changed LAN metric to 5 and now the route table shows LAN as 9 (not sure why it added 4) and USB as 41. netstat shows LAN then USB. ipconfig shows LAN then USB. But still connection is through USB. How do I know? Task manager shows utilization only through USB as well as speed is showing around 1mbps rather than LANs 10mbps. How can I get win7 use LAN while USB is connected. I am just trying to use USB as a backup just in case I lose LAN connection. Please help!! I thought i will make USB metric manually to say 10. But it says I have to reconnect for it to be effective. Currently USB still shows below LAN and still has 9 and 41 in the table. Disconnected USB. Table shows LAN metric as 24 (Not sure why it got changed from 9 and setting got reverted by to automatic) Reconnected USB. Now in the setting still shows 10 and the route table shows 11 for USB and LAN shows 4249 (settings shows 4245, 4 less)) For some reason restarting USB is resetting LAN setting when reconnected. Thanks

    Read the article

  • Two routers on the same network

    - by qroberts
    My ISP has supplied me with a modem/router all in one and it isn't very good. It loses its settings and dies frequently. So I have another router in my apartment (Linksys wrt310n) that is connected to the modem via LAN-LAN port connections. I want to give my Linksys router the DHCP role and also have the ISP modem DMZ everything to the Linksys router. I want to be able to have all computers connected to both routers on the same network as well. I have been able to make it so that the Linksys has a DMZ to it from the ISP modem, but ISP modem LAN port - Linksys WAN port, so they were on different networks. Is there a way to have it so that both of them are on the same network but the Linksys router handles DHCP and port forwarding?

    Read the article

  • How can I get the same SSID for multiple access points?

    - by krosenvold
    I need to upgrade my existing wireless infrastructure and this time I want 2 access points to cover my house, since I get blind spots no matter what with a single AP. I have physical cabling to my central network available for both access points. I would really like these two to interoperate seamlessly as a single SSID. How do I do this? What are the features that the new access points I'm buying would need to support?

    Read the article

  • Windows XP Pro 'Connect to' logon box greyed out with Guest

    - by HaydnWVN
    Have a machine i've just nuked and paved to be used in a public enviroment, yet still connected to a Workgroup. Would like it to prompt for a logon when accessing any of the network shares as different departments will be using it. It does prompt for a login but the username field is greyed out. Have disabled simple file sharing, disabled guest account, changed Local Security Policies (Network access Sharing and Security model to 'classic') all to no avail. A google around has lots of other people with the same issues, lots of 'fixes' with very few feedback. Of course none of these work for me! :)

    Read the article

  • How to test Laptop NIC's throughput using a router and PC - without be bounded?

    - by 0x90
    My setup includes: Cisco router An i-7 PC running windows A laptop with high speed wifi nic, which I want to check its throughput. I would like to run an FTP server on the PC. hook the router over cables to the PC. I would like to have the PC create its own subnet accessible via the cisco router that would be hooked directly to the PC's nic. From the laptop I want to connect via wifi to the PC's wireless router and connect to the ftp server on the PC. is it possible? how do i connect the router to the PC nic and make it broadcast a subnet via wifi for my laptop to connect to? how do i configure an FTP server to operate only on this subnet?

    Read the article

  • Unable to share internet by using HOSTEDNETWORK after installing AVAST recently

    - by Shanks
    I was able to share my laptop's internet with my smartphone by using this command "netsh wlan start hostednetwork". But when I installed Avast in my Windows 8 OS, I am able to start the hostednetwork as before and my smartphone also finds the virtual AP but still I can't use internet on the smartphone. It's like the internet sharing has been disabled by the Antivirus. How do I tell Avast that its okay to use the hostednetwork?

    Read the article

  • Home Network Stopped Working

    - by James
    I have a home network where a machine running Windows 7 Ultimate N acts as a central hub for other devices to access media. This has been running for around 2 years now and there has been no recent configuration changes. The machine has a static IP address (192.168.0.3), which also has not been changed. A few laptops, Sonos music system and mobiles are using the machine for music/video mostly. Additionally, post 3389 was also open for RDP. I used a no-ip agent to map a hostname so I could RDP to the machine from the internet. As of yesterday when I try to ping the machine, I get PING:Transmit Failed, General Error I noticed however, the IP it is pinging is 0.0.2.233. All shares etc are no longer functioning including RDP. On the machine itself, an IP config shows like nothing has changed. It still shows the expected IP. If I ping itself from its hostname, I get the same error as above. machine has been rebooted, the router has been also. Any ideas where to even start on this?

    Read the article

  • Outdoor WiFi Mesh Topology vs. Repeaters

    - by IronJaxor
    Here's the current configuration in our organization (which I believe is incorrect): We have a number of Cisco 1500 series AP's (22 in total), that are mounted outdoors to provide seamless WiFi coverage over a large area. Each AP however has its own physical ethernet connection back to the WLC (All the AP's are marked as Root AP's). They are all broadcasting the same SSID. We have tried to stagger the channel selection but because there are only three non-overlapping channels to choose from, and in some areas the density of AP's is quite high, there is multiple places of channel interference. With this configuration we experience 100-150 disconnects from clients every day. (Our clients are mobile so they move throughout the coverage area constantly). My idea is to switch the AP's to the same channel thereby forming a wireless mesh, use the built in functionality of the 1500 series to use 802.11a as the backhaul, designate one or two AP's as root AP's and wire them back to the WLC. Thereby forming a WiFi mesh, which if I'm not mistaken is the point of the 1500 series in the first place! I am however completely new at WiFi networks and wondering if I am simply mistaken in what I believe my proposed changes will enable, or if there is a better way to tackle the WiFi topology.

    Read the article

  • Why can't I connect to a wifi network with my laptop, when I can with my phone?

    - by Alex Sf.
    I can connect with my phone and use the browser as usual. On my laptop it won't connect when using windows 7 while in ubuntu it will connect, but with no internet. What is going on here and how can I get internet on my laptop ? [edit] It's a public wifi hotspot. I can connect with no issues at home. My network asapter is: Atheros AR5B97. And my phone is an iPhone 3G. The wizard's of no help since it asks me to check the router, which I can't since it's a public hostspot.

    Read the article

  • Can't connect to Internet through WiFi, but can with cable

    - by aldy505
    I'm using Windows 7 32-bit, Toshiba Portege laptop. I want to connect to the WiFi, usually I can do that easily. But, I don't know.. maybe when I tried to install a Microsoft Research: Mesh Virtual WiFi that could connect more than 2 wireless networks. I wanna try in connecting both Wireless router and my personal Ad-Hoc. Now, my laptop don't recognize my WiFi, well, I can connect to the WiFi but it says: "Limited access" and doesn't really connect to the internet. But when I plug the LAN cable, it works. I know the problem is in the laptop's wireless connection or in the properties. Any help for this? UPDATE: The IP and DNS settings, I set to automatic, and when I ran diagnostic, Windows tells me that the wireless network adapter is the problem, but they told me to insert the LAN cable, so how to fix the wireless? They didn't tell me how to fix that.

    Read the article

  • Cisco RV016 dual WAN and VPN setup

    - by sklr
    I have a VPN of several RV016 routers and I want to set some of them with 2 ISPs. I plug the two ISP cables in WAN 1 and 2 ports and configure the router to "Intelligent Balancer(Auto Mode)". It works ok like that, but the VPNs that I set use the public IP of the provider. For example if I have 5 VPNs set for ISP1 (WAN1) and the balancer sends the request trough WAN2 it can't use any of the configured VPNs because the public IP is different. How do I deal with this problem?

    Read the article

  • Is it possible to impersonate another WAP by intercepting communication with other client?

    - by OSX NINJA
    There is a well known WAP that lots of people use. Someone comes in with a laptop equipped with a sniffer. The laptop sniffs people trying to log on to the WAP. It intercepts the connection, and when people try to log on to the WAP, they unknowingly log on through that person's laptop instead. All communication between the WAP and people's laptops go through that person's laptop. That person's laptop is able to block access to certain websites that the WAP would normally allow.

    Read the article

  • laptop and it drastically reduces the performance of my machine as the Indexer is constantly running

    - by Sakthy
    I get the below error on my laptop and it drastically reduces the performance of my machine as the Indexer is constantly running. Please identify a solution except re-installation ? Faulting application name: SearchIndexer.exe, version: 7.0.7600.16385, time stamp: 0x4a5bcdd0 Faulting module name: TQUERY.DLL, version: 7.0.7600.16385, time stamp: 0x4a5bdb21 Exception code: 0xc0000006 Fault offset: 0x0002e5c2 Faulting process id: 0xbe0 Faulting application start time: 0x01cd0752bd78cce1 Faulting application path: C:\Windows\system32\SearchIndexer.exe Faulting module path: C:\Windows\system32\TQUERY.DLL Report Id: 16ce8a2f-7346-11e1-840a-a92a5ee507c3 EventID: 1000

    Read the article

  • Why does pinging a local router return "Destination Host Unreachable"?

    - by Matt H
    I have two tomato routers. One is bridged wirelessly with the other. I have a new server on the network. It's running Ubuntu Server 11.04. They are all connected like this: A - Linux PC B - New Server C - Mac Mini D - Macbook T1 - Tomato 1 T2 - Tomato 2 They are connected like so: A -----+-T1 ==== wireless bridge ==== T2----- ADSL modem | | C & D Connected wirelessly to T2 B -----+ A, C & D do not experience any issues. I have an active SSH session to B from A and it's not experiencing any loss. B, the new server occasionally cannot ping T2 and therefore cannot connect to the internet. However, A can always contact B and B can ping A and B When the network is lost, B can still ping T1, but not T2 yet at the same as B has lost connection to T2, A can still ping T2. Any ideas on what this could be? there is nothing that gives any clues in any of the logs on either router or the linux server. One thing that is interesting is that I set up a ping running between B and T2. T2 has the IP address 192.68.1.1 Here is what I am seeing: From 192.168.1.1 icmp_seq=26 Destination Host Unreachable From 192.168.1.1 icmp_seq=27 Destination Host Unreachable From 192.168.1.1 icmp_seq=28 Destination Host Unreachable From 192.168.1.1 icmp_seq=29 Destination Host Unreachable From 192.168.1.1 icmp_seq=30 Destination Host Unreachable From 192.168.1.1 icmp_seq=31 Destination Host Unreachable From 192.168.1.1 icmp_seq=33 Destination Host Unreachable From 192.168.1.1 icmp_seq=34 Destination Host Unreachable From 192.168.1.1 icmp_seq=35 Destination Host Unreachable 64 bytes from 192.168.1.1: icmp_req=36 ttl=63 time=3.40 ms 64 bytes from 192.168.1.1: icmp_req=37 ttl=63 time=5.70 ms 64 bytes from 192.168.1.1: icmp_req=38 ttl=63 time=2.25 ms 64 bytes from 192.168.1.1: icmp_req=39 ttl=63 time=2.18 ms 64 bytes from 192.168.1.1: icmp_req=40 ttl=63 time=3.12 ms 64 bytes from 192.168.1.1: icmp_req=41 ttl=63 time=2.15 ms 64 bytes from 192.168.1.1: icmp_req=42 ttl=63 time=1.97 ms 64 bytes from 192.168.1.1: icmp_req=43 ttl=63 time= And it cycles to being reachable and not. So I guess you could say the question is, why is the router responding that it cannot be reached?

    Read the article

  • Problem with Macbook air automatically not acquiring free wifi network dns or router address

    - by Rumsfeld
    I have this problem when my macbook air sometimes does not connect to free wifi hotspots. When the problem happens and I try to run the diagnostics, it normally gets to yellow network settings tab. It seems that it for some reason does not acquire automatically the router or dns address. Sometimes after I shut it down and restart it magically connects to the wifi hotspot but it is very inconsistent. Anyone knows a fix for this problem?

    Read the article

  • Why does the Internet WI-FI connection of my laptop disconnect when I connect the ethernet cable to the LAN?

    - by Joey Hammer
    Why does the Internet WI-FI connection of my laptop disconnect when I connect the ethernet cable to the LAN? These are two separate networks, the LAN is without Internet, I just use it to connect the tablet to the laptop and smart phone in my home network. The WI-FI is owned by the landlady and connects to the Internet. I know it should be possible to be connected both to the Internet through WI-FI and to my other computers and gadgets through the LAN because sometimes it works, but sometimes when I connect the ethernet cable the WI-FI disconnects and I wonder why? Pongy OS: Windows 7

    Read the article

  • Can a consumer wireless router act as both a wireless client and access point?

    - by glibdud
    I'm going to be moving in the future, and integrating my home network into that of my landlord. I wish to maintain an isolated network while using his internet connection, so I'm planning on cascading my router off of his (WAN-to-LAN type configuration). Unfortunately, it looks like it might not be feasible to run a wire between the two. Therefore, I'd like to send my WAN connection over WiFi to his router. At my disposal, I have a WRT54GL (running Shibby's Tomato mod), and I just bought an Asus RT-N66U (I can be flexible with the firmware). My first thought was to set up the WRT as a wireless bridge, then run a wire between that and the N66U's WAN port. I'm reasonably sure I could make that work, but can I eliminate the WRT from the equation altogether? Can the N66U connect to the landlord's WiFi as a client, effectively using that as the WAN port, while simultaneously providing wireless access to my devices on an altogether different WLAN?

    Read the article

  • Configuring two nearby WLANs: should I use the same ssid?

    - by Rory
    I'm configuring a home network for basic internet use (ie don't really need connectivity between workstations on the network). My brick walls mean a single wireless router doesn't provide good coverage throughout the house, so I have purchased two powerline adapters and now have the incoming modem/wireless router at one end of the house plugged into a powerline adapter, and at the other end of the house the other powerline adapter plugged into another wireless router. Currently the two wireless networks have different ssids. (The powerline adapters only do power-Ethernet; they're not wireless access points themselves.) This works well, except when I move between rooms and would ideally like my devices (iPad, phones, laptops) to switch from the weak to the strong signal. Sometimes there's enough signal that they hold on to the weak connects instead of switching to the strong one. Should I name the two networks the same ssid, and if so what is the actual effect? Do the signals get confused, is the bandwidth affected, will this help my devices seamlessly move from one to the other, or is the ssid just a cosmetic thing that actually doesn't have any impact on this situation? Are there any other settings that I should configure to make my setup optimal?

    Read the article

  • Exploring other windows 8 machine's root

    - by moswald
    (Note, this is without a domain.) I used to be able to type start \\other_machine\c$ in PowerShell and explorer would pop up with a login dialog. Then I'd type other_machine\moswald and my password (the account is a local admin, of course) and I'm in. Now both machines have Windows 8 installed, and this no longer works (the dialog re-prompts with an "Access is denied" displayed). I've verified (through whoami) that the user is named other_machine\moswald, and I'm positive I'm typing the correct password. So what gives? (edited to include specific result)

    Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >