Search Results

Search found 7595 results on 304 pages for 'functionality'.

Page 210/304 | < Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >

  • Does Jquery UI Dialog Destroy event remove the html too?

    - by chobo2
    Hi I have a dialog that displays a form. When they save or close the dialog I call up the jquery dialog destroy method. However I am not clear if it removes the html div. From the description I would not think so Remove the dialog functionality completely. This will return the element back to its pre-init state. However when looking with firebug I can't see the html container so I am not sure if it gets removed or what. I am not sure if it is because I make the div for the dialog on the fly and use jquery to add it to the page.

    Read the article

  • ActionScript - One Button Limit (Exclusive Touch) For Mobile Devices?

    - by TheDarkIn1978
    two years ago, when i was developing an application for the iPhone, i used the following built-in system method on all of my buttons: [button setExclusiveTouch:YES]; essentially, if you had many buttons on screen, this method insured that the application wouldn't be permitted do crazy things when several button events firing at the same time. problematic: ButtonA and ButtonB are available. each button has a mouse up event which fire a specific reorganization/layout of the UI. if both button's events are fired at the same time, their events will likely conflict, causing a strange new layout, perhaps a runtime error. solution: application buttons cancel any current pending mouse up events when said button enters mouse down. private function mouseDownEventHandler(evt:MouseEvent):void { //if other buttons are currently in a mouse down state ready to fire //a mouse up event, cancel them all here. } of course it's simple to manually handle this if there are only a few buttons on stage, but managing buttons becomes more and more complicated / bug-prone if there are several / many buttons available. is there a convenience method available in AIR specifically for this functionality?

    Read the article

  • Which route should i take for web hosting?

    - by Undermine2k
    Hi I am setting up a small website sort of like an online portfolio. I made the mistake of signing up for shared-web hosting before asking if they supported stored procedures which took me half the day to figure out they didn't. Basically i'm looking for a site that offers me PHP5.4+/ Mysql 5.5 + with support for triggers/stored procedures/ and if possible MyphpAdmin 3.5.1. I also have a domain name I already registered and which I would like to use. What is my best option to look for hosting provider which offers this functionality or to setup a VPS?

    Read the article

  • What is the right way to modify a wordpress query in a plugin?

    - by starepod
    Basically i am playing with a plugin that allows future-dated posts on archive pages. My question is broader than this specific functionality, but everyone likes some context. I have my head around many of the plugin development concepts, but must be missing something very basic. I can successfully rewrite a query that gives me the results i want like this: function modify_where( $where ) { global $wp_query; // define $year, $cat, etc if( is_archive() ) { $where = " AND YEAR(wp_posts.post_date)='".$year."' AND wp_term_taxonomy.taxonomy = 'category' AND wp_term_taxonomy.term_id IN ('".$cat."') AND wp_posts.post_type = 'post' AND (wp_posts.post_status = 'publish' OR wp_posts.post_status = 'future')"; } return $where; } add_filter('posts_where', 'catCal_where' ); However, if i attempt to create a new WP_Query('different_query_stuff') after the main loop the new query uses the same WHERE statement outlined above. The question is : What am I missing? Thanks.

    Read the article

  • New datatype which can have numbers upto 100 digits.

    - by ckv
    Note: This was an interview question and may not have an actual use case currently The question was to design a class that can store numbers which are very very large say each number can have 100 digits. This new class is a datatype like int. What are the different types of constructors, overloads and other functions that you would write. How can this be further extended to support really large floating point numbers. How this can be given to others so that they can reuse the same component with their own additional functionality. My answer consisted of 2 approaches 1. using array of integers to store every say 10 digits 2. using string itself to store the number and perform operations on individual numbers. What would be the best approach?

    Read the article

  • "pay if you want to" using in app purchases (iphone)

    - by Jonathan
    I realise that you can't use in app purchases for real things. But does an in app purchase actually have to give extra functionality in the app. Can it be used to have optional paying? I've made an app that really should be free but I'd like to make a little money even if it's only one 59p. So could I have an in app purchase which users can click to pay if they want to. it might sound stupid but I'm betting there is at least one person who would becase they are nice :)

    Read the article

  • @MustOverride annotation?

    - by Harrypotter2k5
    In .NET, one can specify a "mustoverride" attribute to a method in a particular superclass to ensure that subclasses override that particular method. I was wondering whether anybody has a custom java annotation that could achieve the same effect. Essentially what i want is to push for subclasses to override a method in a superclass that itself has some logic that must be run-through. I dont want to use abstract methods or interfaces, because i want some common functionality to be run in the super method, but more-or-less produce a compiler warning/error denoting that derivative classes should override a given method.

    Read the article

  • JQuery mobile handling links (return false)

    - by shinax
    I'm planning on using JQM to make a simple mobile web app, and I'm having problems getting this simple functionality to work: when I click on some links (not all of them), I want to be able to first process some data, and then depending on that outcome, sometimes continue the link action (I like the whole transitions and ajax things), and sometimes don't. The important part is that I want to preserve the normal JQMobile transitions and stuff for the links, just sometimes prevent them (for example for validation and things like that). I've tried with: return false, preventDefault (and in combination with stopPropagation), and data-ajax="false", and none hav worked, they all redirect. Could somebody tell me the correct way to to this in JQMobile? Just in case it's important: I'm using anchor links, using this to test. Thank you in advance, Jennifer.

    Read the article

  • Why does `Array.length`, `Function.length`, `String.length`, etc return 1?

    - by zealoushacker
    While teaching my JavaScript class yesterday, my students and I came across some interesting functionality that I thought might be worth capturing in a question and the answer I've come to. Typing Array.length in the JS console in chrome returns 1. Likewise, Function.length returns 1. This is important because: Every function in JavaScript is actually a Function object. (MDN JS Ref: Function) Thus, Object.length and likely all other native objects will and should return 1 as the value of the length property. So, finally why is this behavior occurring?

    Read the article

  • We have migrated VB6 code to C# in .net.

    - by VB
    The code was migrated using a third party tool. what ever the tool couldnt do, was done by the .net developers, so that all compile issues were fixed. My question is, for such migration activities, do we not bother running unit tests for the functions. Secondly, Could anyone suggest if we should use some tool in VSTS 10 to create a UML model of this code to minimize risks of issues that the client might find. How cumbersome is it. Are there any other suggestions for how quality migrated code can be delivered, in light of the fact that the functionality of the original VB6 application is unknown to us.

    Read the article

  • Which one of the following is NOT a pitfall of inheritance?

    - by Difficult PEOPLE
    Which one of the following is NOT a pitfall of inheritance? Base-derive classes should be totally separate and do not have an is-a relationship. Base-derive classes should have been aggregate classes instead. Inheritance may be inverted, example: Truck<-Vehicle should be Vehicle<-Truck. Incompatible class hierarchies may be connected because of multiple inheritance. Aggregation should have been used instead. Functionality is transferred from a base class to a derived one. In my opinion, NOT a pitfall of inheritance meas can use inheritance. 1 seems do without inheritance 2 aggregate substitute Base-derive I don't know So, I think 5 is the answer.

    Read the article

  • A step-up from TiddlyWiki that is still 100% portable?

    - by Smandoli
    TiddlyWiki is a great idea, brilliantly implemented. I'm using it as a portable personal "knowledge manager," and these are the prize virtues: It travels on my USB flash memory stick and runs on any computer, regardless of operating system No software installation is needed on the computer (TiddlyWiki merely uses the Internet browser) No Internet connection is needed In terms of data retrieval functionality, it mimics a relational database (use of tags and internal links) Let's say I've got a million words of prose in 4,000 tiddlers (posts). I'm still testing, but it looks like TiddlyWiki gets very slow. Is there an app like TiddlyWiki that keeps all the virtues I listed above, and allows more storage? NOTE: Separation of content and presentation would be ideal. It's nifty that TiddlyWiki has everything in a single HTML document, but it's unhelpful in many ways. I don't care if a directory of assorted docs is needed (SQLite, XML?), as long as it's functionally self-contained.

    Read the article

  • Using jQuery to POST Form Data to an ASP.NET ASMX AJAX Web Service

    - by Rick Strahl
    The other day I got a question about how to call an ASP.NET ASMX Web Service or PageMethods with the POST data from a Web Form (or any HTML form for that matter). The idea is that you should be able to call an endpoint URL, send it regular urlencoded POST data and then use Request.Form[] to retrieve the posted data as needed. My first reaction was that you can’t do it, because ASP.NET ASMX AJAX services (as well as Page Methods and WCF REST AJAX Services) require that the content POSTed to the server is posted as JSON and sent with an application/json or application/x-javascript content type. IOW, you can’t directly call an ASP.NET AJAX service with regular urlencoded data. Note that there are other ways to accomplish this. You can use ASP.NET MVC and a custom route, an HTTP Handler or separate ASPX page, or even a WCF REST service that’s configured to use non-JSON inputs. However if you want to use an ASP.NET AJAX service (or Page Methods) with a little bit of setup work it’s actually quite easy to capture all the form variables on the client and ship them up to the server. The basic steps needed to make this happen are: Capture form variables into an array on the client with jQuery’s .serializeArray() function Use $.ajax() or my ServiceProxy class to make an AJAX call to the server to send this array On the server create a custom type that matches the .serializeArray() name/value structure Create extension methods on NameValue[] to easily extract form variables Create a [WebMethod] that accepts this name/value type as an array (NameValue[]) This seems like a lot of work but realize that steps 3 and 4 are a one time setup step that can be reused in your entire site or multiple applications. Let’s look at a short example that looks like this as a base form of fields to ship to the server: The HTML for this form looks something like this: <div id="divMessage" class="errordisplay" style="display: none"> </div> <div> <div class="label">Name:</div> <div><asp:TextBox runat="server" ID="txtName" /></div> </div> <div> <div class="label">Company:</div> <div><asp:TextBox runat="server" ID="txtCompany"/></div> </div> <div> <div class="label" ></div> <div> <asp:DropDownList runat="server" ID="lstAttending"> <asp:ListItem Text="Attending" Value="Attending"/> <asp:ListItem Text="Not Attending" Value="NotAttending" /> <asp:ListItem Text="Maybe Attending" Value="MaybeAttending" /> <asp:ListItem Text="Not Sure Yet" Value="NotSureYet" /> </asp:DropDownList> </div> </div> <div> <div class="label">Special Needs:<br /> <small>(check all that apply)</small></div> <div> <asp:ListBox runat="server" ID="lstSpecialNeeds" SelectionMode="Multiple"> <asp:ListItem Text="Vegitarian" Value="Vegitarian" /> <asp:ListItem Text="Vegan" Value="Vegan" /> <asp:ListItem Text="Kosher" Value="Kosher" /> <asp:ListItem Text="Special Access" Value="SpecialAccess" /> <asp:ListItem Text="No Binder" Value="NoBinder" /> </asp:ListBox> </div> </div> <div> <div class="label"></div> <div> <asp:CheckBox ID="chkAdditionalGuests" Text="Additional Guests" runat="server" /> </div> </div> <hr /> <input type="button" id="btnSubmit" value="Send Registration" /> The form includes a few different kinds of form fields including a multi-selection listbox to demonstrate retrieving multiple values. Setting up the Server Side [WebMethod] The [WebMethod] on the server we’re going to call is going to be very simple and just capture the content of these values and echo then back as a formatted HTML string. Obviously this is overly simplistic but it serves to demonstrate the simple point of capturing the POST data on the server in an AJAX callback. public class PageMethodsService : System.Web.Services.WebService { [WebMethod] public string SendRegistration(NameValue[] formVars) { StringBuilder sb = new StringBuilder(); sb.AppendFormat("Thank you {0}, <br/><br/>", HttpUtility.HtmlEncode(formVars.Form("txtName"))); sb.AppendLine("You've entered the following: <hr/>"); foreach (NameValue nv in formVars) { // strip out ASP.NET form vars like _ViewState/_EventValidation if (!nv.name.StartsWith("__")) { if (nv.name.StartsWith("txt") || nv.name.StartsWith("lst") || nv.name.StartsWith("chk")) sb.Append(nv.name.Substring(3)); else sb.Append(nv.name); sb.AppendLine(": " + HttpUtility.HtmlEncode(nv.value) + "<br/>"); } } sb.AppendLine("<hr/>"); string[] needs = formVars.FormMultiple("lstSpecialNeeds"); if (needs == null) sb.AppendLine("No Special Needs"); else { sb.AppendLine("Special Needs: <br/>"); foreach (string need in needs) { sb.AppendLine("&nbsp;&nbsp;" + need + "<br/>"); } } return sb.ToString(); } } The key feature of this method is that it receives a custom type called NameValue[] which is an array of NameValue objects that map the structure that the jQuery .serializeArray() function generates. There are two custom types involved in this: The actual NameValue type and a NameValueExtensions class that defines a couple of extension methods for the NameValue[] array type to allow for single (.Form()) and multiple (.FormMultiple()) value retrieval by name. The NameValue class is as simple as this and simply maps the structure of the array elements of .serializeArray(): public class NameValue { public string name { get; set; } public string value { get; set; } } The extension method class defines the .Form() and .FormMultiple() methods to allow easy retrieval of form variables from the returned array: /// <summary> /// Simple NameValue class that maps name and value /// properties that can be used with jQuery's /// $.serializeArray() function and JSON requests /// </summary> public static class NameValueExtensionMethods { /// <summary> /// Retrieves a single form variable from the list of /// form variables stored /// </summary> /// <param name="formVars"></param> /// <param name="name">formvar to retrieve</param> /// <returns>value or string.Empty if not found</returns> public static string Form(this NameValue[] formVars, string name) { var matches = formVars.Where(nv => nv.name.ToLower() == name.ToLower()).FirstOrDefault(); if (matches != null) return matches.value; return string.Empty; } /// <summary> /// Retrieves multiple selection form variables from the list of /// form variables stored. /// </summary> /// <param name="formVars"></param> /// <param name="name">The name of the form var to retrieve</param> /// <returns>values as string[] or null if no match is found</returns> public static string[] FormMultiple(this NameValue[] formVars, string name) { var matches = formVars.Where(nv => nv.name.ToLower() == name.ToLower()).Select(nv => nv.value).ToArray(); if (matches.Length == 0) return null; return matches; } } Using these extension methods it’s easy to retrieve individual values from the array: string name = formVars.Form("txtName"); or multiple values: string[] needs = formVars.FormMultiple("lstSpecialNeeds"); if (needs != null) { // do something with matches } Using these functions in the SendRegistration method it’s easy to retrieve a few form variables directly (txtName and the multiple selections of lstSpecialNeeds) or to iterate over the whole list of values. Of course this is an overly simple example – in typical app you’d probably want to validate the input data and save it to the database and then return some sort of confirmation or possibly an updated data list back to the client. Since this is a full AJAX service callback realize that you don’t have to return simple string values – you can return any of the supported result types (which are most serializable types) including complex hierarchical objects and arrays that make sense to your client code. POSTing Form Variables from the Client to the AJAX Service To call the AJAX service method on the client is straight forward and requires only use of little native jQuery plus JSON serialization functionality. To start add jQuery and the json2.js library to your page: <script src="Scripts/jquery.min.js" type="text/javascript"></script> <script src="Scripts/json2.js" type="text/javascript"></script> json2.js can be found here (be sure to remove the first line from the file): http://www.json.org/json2.js It’s required to handle JSON serialization for those browsers that don’t support it natively. With those script references in the document let’s hookup the button click handler and call the service: $(document).ready(function () { $("#btnSubmit").click(sendRegistration); }); function sendRegistration() { var arForm = $("#form1").serializeArray(); $.ajax({ url: "PageMethodsService.asmx/SendRegistration", type: "POST", contentType: "application/json", data: JSON.stringify({ formVars: arForm }), dataType: "json", success: function (result) { var jEl = $("#divMessage"); jEl.html(result.d).fadeIn(1000); setTimeout(function () { jEl.fadeOut(1000) }, 5000); }, error: function (xhr, status) { alert("An error occurred: " + status); } }); } The key feature in this code is the $("#form1").serializeArray();  call which serializes all the form fields of form1 into an array. Each form var is represented as an object with a name/value property. This array is then serialized into JSON with: JSON.stringify({ formVars: arForm }) The format for the parameter list in AJAX service calls is an object with one property for each parameter of the method. In this case its a single parameter called formVars and we’re assigning the array of form variables to it. The URL to call on the server is the name of the Service (or ASPX Page for Page Methods) plus the name of the method to call. On return the success callback receives the result from the AJAX callback which in this case is the formatted string which is simply assigned to an element in the form and displayed. Remember the result type is whatever the method returns – it doesn’t have to be a string. Note that ASP.NET AJAX and WCF REST return JSON data as a wrapped object so the result has a ‘d’ property that holds the actual response: jEl.html(result.d).fadeIn(1000); Slightly simpler: Using ServiceProxy.js If you want things slightly cleaner you can use the ServiceProxy.js class I’ve mentioned here before. The ServiceProxy class handles a few things for calling ASP.NET and WCF services more cleanly: Automatic JSON encoding Automatic fix up of ‘d’ wrapper property Automatic Date conversion on the client Simplified error handling Reusable and abstracted To add the service proxy add: <script src="Scripts/ServiceProxy.js" type="text/javascript"></script> and then change the code to this slightly simpler version: <script type="text/javascript"> proxy = new ServiceProxy("PageMethodsService.asmx/"); $(document).ready(function () { $("#btnSubmit").click(sendRegistration); }); function sendRegistration() { var arForm = $("#form1").serializeArray(); proxy.invoke("SendRegistration", { formVars: arForm }, function (result) { var jEl = $("#divMessage"); jEl.html(result).fadeIn(1000); setTimeout(function () { jEl.fadeOut(1000) }, 5000); }, function (error) { alert(error.message); } ); } The code is not very different but it makes the call as simple as specifying the method to call, the parameters to pass and the actions to take on success and error. No more remembering which content type and data types to use and manually serializing to JSON. This code also removes the “d” property processing in the response and provides more consistent error handling in that the call always returns an error object regardless of a server error or a communication error unlike the native $.ajax() call. Either approach works and both are pretty easy. The ServiceProxy really pays off if you use lots of service calls and especially if you need to deal with date values returned from the server  on the client. Summary Making Web Service calls and getting POST data to the server is not always the best option – ASP.NET and WCF AJAX services are meant to work with data in objects. However, in some situations it’s simply easier to POST all the captured form data to the server instead of mapping all properties from the input fields to some sort of message object first. For this approach the above POST mechanism is useful as it puts the parsing of the data on the server and leaves the client code lean and mean. It’s even easy to build a custom model binder on the server that can map the array values to properties on an object generically with some relatively simple Reflection code and without having to manually map form vars to properties and do string conversions. Keep in mind though that other approaches also abound. ASP.NET MVC makes it pretty easy to create custom routes to data and the built in model binder makes it very easy to deal with inbound form POST data in its original urlencoded format. The West Wind West Wind Web Toolkit also includes functionality for AJAX callbacks using plain POST values. All that’s needed is a Method parameter to query/form value to specify the method to be called on the server. After that the content type is completely optional and up to the consumer. It’d be nice if the ASP.NET AJAX Service and WCF AJAX Services weren’t so tightly bound to the content type so that you could more easily create open access service endpoints that can take advantage of urlencoded data that is everywhere in existing pages. It would make it much easier to create basic REST endpoints without complicated service configuration. Ah one can dream! In the meantime I hope this article has given you some ideas on how you can transfer POST data from the client to the server using JSON – it might be useful in other scenarios beyond ASP.NET AJAX services as well. Additional Resources ServiceProxy.js A small JavaScript library that wraps $.ajax() to call ASP.NET AJAX and WCF AJAX Services. Includes date parsing extensions to the JSON object, a global dataFilter for processing dates on all jQuery JSON requests, provides cleanup for the .NET wrapped message format and handles errors in a consistent fashion. Making jQuery Calls to WCF/ASMX with a ServiceProxy Client More information on calling ASMX and WCF AJAX services with jQuery and some more background on ServiceProxy.js. Note the implementation has slightly changed since the article was written. ww.jquery.js The West Wind West Wind Web Toolkit also includes ServiceProxy.js in the West Wind jQuery extension library. This version is slightly different and includes embedded json encoding/decoding based on json2.js.© Rick Strahl, West Wind Technologies, 2005-2010Posted in jQuery  ASP.NET  AJAX  

    Read the article

  • jQuery Time Entry with Time Navigation Keys

    - by Rick Strahl
    So, how do you display time values in your Web applications? Displaying date AND time values in applications is lot less standardized than date display only. While date input has become fairly universal with various date picker controls available, time entry continues to be a bit of a non-standardized. In my own applications I tend to use the jQuery UI DatePicker control for date entries and it works well for that. Here's an example: The date entry portion is well defined and it makes perfect sense to have a calendar pop up so you can pick a date from a rich UI when necessary. However, time values are much less obvious when it comes to displaying a UI or even just making time entries more useful. There are a slew of time picker controls available but other than adding some visual glitz, they are not really making time entry any easier. Part of the reason for this is that time entry is usually pretty simple. Clicking on a dropdown of any sort and selecting a value from a long scrolling list tends to take more user interaction than just typing 5 characters (7 if am/pm is used). Keystrokes can make Time Entry easier Time entry maybe pretty simple, but I find that adding a few hotkeys to handle date navigation can make it much easier. Specifically it'd be nice to have keys to: Jump to the current time (Now) Increase/decrease minutes Increase/decrease hours The timeKeys jQuery PlugIn Some time ago I created a small plugin to handle this scenario. It's non-visual other than tooltip that pops up when you press ? to display the hotkeys that are available: Try it Online The keys loosely follow the ancient Quicken convention of using the first and last letters of what you're increasing decreasing (ie. H to decrease, R to increase hours and + and - for the base unit or minutes here). All navigation happens via the keystrokes shown above, so it's all non-visual, which I think is the most efficient way to deal with dates. To hook up the plug-in, start with the textbox:<input type="text" id="txtTime" name="txtTime" value="12:05 pm" title="press ? for time options" /> Note the title which might be useful to alert people using the field that additional functionality is available. To hook up the plugin code is as simple as:$("#txtTime").timeKeys(); You essentially tie the plugin to any text box control. OptionsThe syntax for timeKeys allows for an options map parameter:$(selector).timeKeys(options); Options are passed as a parameter map object which can have the following properties: timeFormatYou can pass in a format string that allows you to format the date. The default is "hh:mm t" which is US time format that shows a 12 hour clock with am/pm. Alternately you can pass in "HH:mm" which uses 24 hour time. HH, hh, mm and t are translated in the format string - you can arrange the format as you see fit. callbackYou can also specify a callback function that is called when the date value has been set. This allows you to either re-format the date or perform post processing (such as displaying highlight if it's after a certain hour for example). Here's another example that uses both options:$("#txtTime").timeKeys({ timeFormat: "HH:mm", callback: function (time) { showStatus("new time is: " + time.toString() + " " + $(this).val() ); } }); The plugin code itself is fairly simple. It hooks the keydown event and checks for the various keys that affect time navigation which is straight forward. The bulk of the code however deals with parsing the time value and formatting the output using a Time class that implements parsing, formatting and time navigation methods. Here's the code for the timeKeys jQuery plug-in:/// <reference path="jquery.js" /> /// <reference path="ww.jquery.js" /> (function ($) { $.fn.timeKeys = function (options) { /// <summary> /// Attaches a set of hotkeys to time fields /// + Add minute - subtract minute /// H Subtract Hour R Add houR /// ? Show keys /// </summary> /// <param name="options" type="object"> /// Options: /// timeFormat: "hh:mm t" by default HH:mm alternate /// callback: callback handler after time assignment /// </param> /// <example> /// var proxy = new ServiceProxy("JsonStockService.svc/"); /// proxy.invoke("GetStockQuote",{symbol:"msft"},function(quote) { alert(result.LastPrice); },onPageError); ///</example> if (this.length < 1) return this; var opt = { timeFormat: "hh:mm t", callback: null } $.extend(opt, options); return this.keydown(function (e) { var $el = $(this); var time = new Time($el.val()); //alert($(this).val() + " " + time.toString() + " " + time.date.toString()); switch (e.keyCode) { case 78: // [N]ow time = new Time(new Date()); break; case 109: case 189: // - time.addMinutes(-1); break; case 107: case 187: // + time.addMinutes(1); break; case 72: //H time.addHours(-1); break; case 82: //R time.addHours(1); break; case 191: // ? if (e.shiftKey) $(this).tooltip("<b>N</b> Now<br/><b>+</b> add minute<br /><b>-</b> subtract minute<br /><b>H</b> Subtract Hour<br /><b>R</b> add hour", 4000, { isHtml: true }); return false; default: return true; } $el.val(time.toString(opt.timeFormat)); if (opt.callback) { // call async and set context in this element setTimeout(function () { opt.callback.call($el.get(0), time) }, 1); } return false; }); } Time = function (time, format) { /// <summary> /// Time object that can parse and format /// a time values. /// </summary> /// <param name="time" type="object"> /// A time value as a string (12:15pm or 23:01), a Date object /// or time value. /// /// </param> /// <param name="format" type="string"> /// Time format string: /// HH:mm (23:01) /// hh:mm t (11:01 pm) /// </param> /// <example> /// var time = new Time( new Date()); /// time.addHours(5); /// time.addMinutes(10); /// var s = time.toString(); /// /// var time2 = new Time(s); // parse with constructor /// var t = time2.parse("10:15 pm"); // parse with .parse() method /// alert( t.hours + " " + t.mins + " " + t.ampm + " " + t.hours25) ///</example> var _I = this; this.date = new Date(); this.timeFormat = "hh:mm t"; if (format) this.timeFormat = format; this.parse = function (time) { /// <summary> /// Parses time value from a Date object, or string in format of: /// 12:12pm or 23:01 /// </summary> /// <param name="time" type="any"> /// A time value as a string (12:15pm or 23:01), a Date object /// or time value. /// /// </param> if (!time) return null; // Date if (time.getDate) { var t = {}; var d = time; t.hours24 = d.getHours(); t.mins = d.getMinutes(); t.ampm = "am"; if (t.hours24 > 11) { t.ampm = "pm"; if (t.hours24 > 12) t.hours = t.hours24 - 12; } time = t; } if (typeof (time) == "string") { var parts = time.split(":"); if (parts < 2) return null; var time = {}; time.hours = parts[0] * 1; time.hours24 = time.hours; time.mins = parts[1].toLowerCase(); if (time.mins.indexOf("am") > -1) { time.ampm = "am"; time.mins = time.mins.replace("am", ""); if (time.hours == 12) time.hours24 = 0; } else if (time.mins.indexOf("pm") > -1) { time.ampm = "pm"; time.mins = time.mins.replace("pm", ""); if (time.hours < 12) time.hours24 = time.hours + 12; } time.mins = time.mins * 1; } _I.date.setMinutes(time.mins); _I.date.setHours(time.hours24); return time; }; this.addMinutes = function (mins) { /// <summary> /// adds minutes to the internally stored time value. /// </summary> /// <param name="mins" type="number"> /// number of minutes to add to the date /// </param> _I.date.setMinutes(_I.date.getMinutes() + mins); } this.addHours = function (hours) { /// <summary> /// adds hours the internally stored time value. /// </summary> /// <param name="hours" type="number"> /// number of hours to add to the date /// </param> _I.date.setHours(_I.date.getHours() + hours); } this.getTime = function () { /// <summary> /// returns a time structure from the currently /// stored time value. /// Properties: hours, hours24, mins, ampm /// </summary> return new Time(new Date()); h } this.toString = function (format) { /// <summary> /// returns a short time string for the internal date /// formats: 12:12 pm or 23:12 /// </summary> /// <param name="format" type="string"> /// optional format string for date /// HH:mm, hh:mm t /// </param> if (!format) format = _I.timeFormat; var hours = _I.date.getHours(); if (format.indexOf("t") > -1) { if (hours > 11) format = format.replace("t", "pm") else format = format.replace("t", "am") } if (format.indexOf("HH") > -1) format = format.replace("HH", hours.toString().padL(2, "0")); if (format.indexOf("hh") > -1) { if (hours > 12) hours -= 12; if (hours == 0) hours = 12; format = format.replace("hh", hours.toString().padL(2, "0")); } if (format.indexOf("mm") > -1) format = format.replace("mm", _I.date.getMinutes().toString().padL(2, "0")); return format; } // construction if (time) this.time = this.parse(time); } String.prototype.padL = function (width, pad) { if (!width || width < 1) return this; if (!pad) pad = " "; var length = width - this.length if (length < 1) return this.substr(0, width); return (String.repeat(pad, length) + this).substr(0, width); } String.repeat = function (chr, count) { var str = ""; for (var x = 0; x < count; x++) { str += chr }; return str; } })(jQuery); The plugin consists of the actual plugin and the Time class which handles parsing and formatting of the time value via the .parse() and .toString() methods. Code like this always ends up taking up more effort than the actual logic unfortunately. There are libraries out there that can handle this like datejs or even ww.jquery.js (which is what I use) but to keep the code self contained for this post the plugin doesn't rely on external code. There's one optional exception: The code as is has one dependency on ww.jquery.js  for the tooltip plugin that provides the small popup for all the hotkeys available. You can replace that code with some other mechanism to display hotkeys or simply remove it since that behavior is optional. While we're at it: A jQuery dateKeys plugIn Although date entry tends to be much better served with drop down calendars to pick dates from, often it's also easier to pick dates using a few simple hotkeys. Navigation that uses + - for days and M and H for MontH navigation, Y and R for YeaR navigation are a quick way to enter dates without having to resort to using a mouse and clicking around to what you want to find. Note that this plugin does have a dependency on ww.jquery.js for the date formatting functionality.$.fn.dateKeys = function (options) { /// <summary> /// Attaches a set of hotkeys to date 'fields' /// + Add day - subtract day /// M Subtract Month H Add montH /// Y Subtract Year R Add yeaR /// ? Show keys /// </summary> /// <param name="options" type="object"> /// Options: /// dateFormat: "MM/dd/yyyy" by default "MMM dd, yyyy /// callback: callback handler after date assignment /// </param> /// <example> /// var proxy = new ServiceProxy("JsonStockService.svc/"); /// proxy.invoke("GetStockQuote",{symbol:"msft"},function(quote) { alert(result.LastPrice); },onPageError); ///</example> if (this.length < 1) return this; var opt = { dateFormat: "MM/dd/yyyy", callback: null }; $.extend(opt, options); return this.keydown(function (e) { var $el = $(this); var d = new Date($el.val()); if (!d) d = new Date(1900, 0, 1, 1, 1); var month = d.getMonth(); var year = d.getFullYear(); var day = d.getDate(); switch (e.keyCode) { case 84: // [T]oday d = new Date(); break; case 109: case 189: d = new Date(year, month, day - 1); break; case 107: case 187: d = new Date(year, month, day + 1); break; case 77: //M d = new Date(year, month - 1, day); break; case 72: //H d = new Date(year, month + 1, day); break; case 191: // ? if (e.shiftKey) $el.tooltip("<b>T</b> Today<br/><b>+</b> add day<br /><b>-</b> subtract day<br /><b>M</b> subtract Month<br /><b>H</b> add montH<br/><b>Y</b> subtract Year<br/><b>R</b> add yeaR", 5000, { isHtml: true }); return false; default: return true; } $el.val(d.formatDate(opt.dateFormat)); if (opt.callback) // call async setTimeout(function () { opt.callback.call($el.get(0),d); }, 10); return false; }); } The logic for this plugin is similar to the timeKeys plugin, but it's a little simpler as it tries to directly parse the date value from a string via new Date(inputString). As mentioned it also uses a helper function from ww.jquery.js to format dates which removes the logic to perform date formatting manually which again reduces the size of the code. And the Key is… I've been using both of these plugins in combination with the jQuery UI datepicker for datetime values and I've found that I rarely actually pop up the date picker any more. It's just so much more efficient to use the hotkeys to navigate dates. It's still nice to have the picker around though - it provides the expected behavior for date entry. For time values however I can't justify the UI overhead of a picker that doesn't make it any easier to pick a time. Most people know how to type in a time value and if they want shortcuts keystrokes easily beat out any pop up UI. Hopefully you'll find this as useful as I have found it for my code. Resources Online Sample Download Sample Project © Rick Strahl, West Wind Technologies, 2005-2011Posted in jQuery  HTML   Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Why do apache2 upgrades remove and not re-install libapache2-mod-php5?

    - by nutznboltz
    We repeatedly see that when an apache2 update arrives and is installed it causes the libapache2-mod-php5 package to be removed and does not subsequently re-install it automatically. We must subsequently re-install the libapache2-mod-php5 manually in order to restore functionality to our web server. Please see the following github gist, it is a contiguous section of our server's dpkg.log showing the November 14, 2011 update to apache2: https://gist.github.com/1368361 it includes 2011-11-14 11:22:18 remove libapache2-mod-php5 5.3.2-1ubuntu4.10 5.3.2-1ubuntu4.10 Is this a known issue? Do other people see this too? I could not find any launchpad bug reports about it. Platform details: $ lsb_release -ds Ubuntu 10.04.3 LTS $ uname -srvm Linux 2.6.38-12-virtual #51~lucid1-Ubuntu SMP Thu Sep 29 20:27:50 UTC 2011 x86_64 $ dpkg -l | awk '/ii.*apache/ {print $2 " " $3 }' apache2 2.2.14-5ubuntu8.7 apache2-mpm-prefork 2.2.14-5ubuntu8.7 apache2-utils 2.2.14-5ubuntu8.7 apache2.2-bin 2.2.14-5ubuntu8.7 apache2.2-common 2.2.14-5ubuntu8.7 libapache2-mod-authnz-external 3.2.4-2+squeeze1build0.10.04.1 libapache2-mod-php5 5.3.2-1ubuntu4.10 Thanks At a high-level the update process looks like: package package_name do action :upgrade case node[:platform] when 'centos', 'redhat', 'scientific' options '--disableplugin=fastestmirror' when 'ubuntu' options '-o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold"' end end But at a lower level def install_package(name, version) run_command_with_systems_locale( :command = "apt-get -q -y#{expand_options(@new_resource.options)} install #{name}=#{version}", :environment = { "DEBIAN_FRONTEND" = "noninteractive" } ) end def upgrade_package(name, version) install_package(name, version) end So Chef is using "install" to do "update". This sort of moves the question around to "how does apt-get safe-upgrade" remember to re-install libapache-mod-php5? The exact sequence of packages that triggered this was: apache2 apache2-mpm-prefork apache2-mpm-worker apache2-utils apache2.2-bin apache2.2-common But the code is attempting to run checks to make sure the packages in that list are installed already before attempting to "upgrade" them. case node[:platform] when 'debian', 'centos', 'fedora', 'redhat', 'scientific', 'ubuntu' # first primitive way is to define the updates in the recipe # data bags will be used later %w/ apache2 apache2-mpm-prefork apache2-mpm-worker apache2-utils apache2.2-bin apache2.2-common /.each{ |package_name| Chef::Log.debug("is #{package_name} among local packages available for changes?") next unless node[:packages][:changes].keys.include?(package_name) Chef::Log.debug("is #{package_name} available for upgrade?") next unless node[:packages][:changes][package_name][:action] == 'upgrade' package package_name do action :upgrade case node[:platform] when 'centos', 'redhat', 'scientific' options '--disableplugin=fastestmirror' when 'ubuntu' options '-o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold"' end end tag('upgraded') } # after upgrading everything, run yum cache updater if tagged?('upgraded') # Remove old orphaned dependencies and kernel images and kernel headers etc. # Remove cached deb files. case node[:platform] when 'ubuntu' execute 'apt-get -y autoremove' execute 'apt-get clean' # Re-check what updates are available soon. when 'centos', 'fedora', 'redhat', 'scientific' node[:packages][:last_time_we_looked_at_yum] = 0 end untag('upgraded') end end But it's clear that it fails since the dpkg.log has 2011-11-14 11:22:25 install apache2-mpm-worker 2.2.14-5ubuntu8.7 on a system which does not currently have apache2-mpm-worker. I will have to discuss this with the author, thanks again.

    Read the article

  • Serious about Embedded: Java Embedded @ JavaOne 2012

    - by terrencebarr
    It bears repeating: More than ever, the Java platform is the best technology for many embedded use cases. Java’s platform independence, high level of functionality, security, and developer productivity address the key pain points in building embedded solutions. Transitioning from 16 to 32 bit or even 64 bit? Need to support multiple architectures and operating systems with a single code base? Want to scale on multi-core systems? Require a proven security model? Dynamically deploy and manage software on your devices? Cut time to market by leveraging code, expertise, and tools from a large developer ecosystem? Looking for back-end services, integration, and management? The Java platform has got you covered. Java already powers around 10 billion devices worldwide, with traditional desktops and servers being only a small portion of that. And the ‘Internet of Things‘ is just really starting to explode … it is estimated that within five years, intelligent and connected embedded devices will outnumber desktops and mobile phones combined, and will generate the majority of the traffic on the Internet. Is your platform and services strategy ready for the coming disruptions and opportunities? It should come as no surprise that Oracle is keenly focused on Java for Embedded. At JavaOne 2012 San Francisco the dedicated track for Java ME, Java Card, and Embedded keeps growing, with 52 sessions, tutorials, Hands-on-Labs, and BOFs scheduled for this track alone, plus keynotes, demos, booths, and a variety of other embedded content. To further prove Oracle’s commitment, in 2012 for the first time there will be a dedicated sub-conference focused on the business aspects of embedded Java: Java Embedded @ JavaOne. This conference will run for two days in parallel to JavaOne in San Francisco, will have its own business-oriented track and content, and targets C-level executives, architects, business leaders, and decision makers. Registration and Call For Papers for Java Embedded @ JavaOne are now live. We expect a lot of interest in this new event and space is limited, so be sure to submit your paper and register soon. Hope to see you there! Cheers, – Terrence Filed under: Mobile & Embedded Tagged: ARM, Call for Papers, Embedded Java, Java Embedded, Java Embedded @ JavaOne, Java ME, Java SE Embedded, Java SE for Embedded, JavaOne San Francisco, PowerPC

    Read the article

  • Toorcon14

    - by danx
    Toorcon 2012 Information Security Conference San Diego, CA, http://www.toorcon.org/ Dan Anderson, October 2012 It's almost Halloween, and we all know what that means—yes, of course, it's time for another Toorcon Conference! Toorcon is an annual conference for people interested in computer security. This includes the whole range of hackers, computer hobbyists, professionals, security consultants, press, law enforcement, prosecutors, FBI, etc. We're at Toorcon 14—see earlier blogs for some of the previous Toorcon's I've attended (back to 2003). This year's "con" was held at the Westin on Broadway in downtown San Diego, California. The following are not necessarily my views—I'm just the messenger—although I could have misquoted or misparaphrased the speakers. Also, I only reviewed some of the talks, below, which I attended and interested me. MalAndroid—the Crux of Android Infections, Aditya K. Sood Programming Weird Machines with ELF Metadata, Rebecca "bx" Shapiro Privacy at the Handset: New FCC Rules?, Valkyrie Hacking Measured Boot and UEFI, Dan Griffin You Can't Buy Security: Building the Open Source InfoSec Program, Boris Sverdlik What Journalists Want: The Investigative Reporters' Perspective on Hacking, Dave Maas & Jason Leopold Accessibility and Security, Anna Shubina Stop Patching, for Stronger PCI Compliance, Adam Brand McAfee Secure & Trustmarks — a Hacker's Best Friend, Jay James & Shane MacDougall MalAndroid—the Crux of Android Infections Aditya K. Sood, IOActive, Michigan State PhD candidate Aditya talked about Android smartphone malware. There's a lot of old Android software out there—over 50% Gingerbread (2.3.x)—and most have unpatched vulnerabilities. Of 9 Android vulnerabilities, 8 have known exploits (such as the old Gingerbread Global Object Table exploit). Android protection includes sandboxing, security scanner, app permissions, and screened Android app market. The Android permission checker has fine-grain resource control, policy enforcement. Android static analysis also includes a static analysis app checker (bouncer), and a vulnerablity checker. What security problems does Android have? User-centric security, which depends on the user to grant permission and make smart decisions. But users don't care or think about malware (the're not aware, not paranoid). All they want is functionality, extensibility, mobility Android had no "proper" encryption before Android 3.0 No built-in protection against social engineering and web tricks Alternative Android app markets are unsafe. Simply visiting some markets can infect Android Aditya classified Android Malware types as: Type A—Apps. These interact with the Android app framework. For example, a fake Netflix app. Or Android Gold Dream (game), which uploads user files stealthy manner to a remote location. Type K—Kernel. Exploits underlying Linux libraries or kernel Type H—Hybrid. These use multiple layers (app framework, libraries, kernel). These are most commonly used by Android botnets, which are popular with Chinese botnet authors What are the threats from Android malware? These incude leak info (contacts), banking fraud, corporate network attacks, malware advertising, malware "Hackivism" (the promotion of social causes. For example, promiting specific leaders of the Tunisian or Iranian revolutions. Android malware is frequently "masquerated". That is, repackaged inside a legit app with malware. To avoid detection, the hidden malware is not unwrapped until runtime. The malware payload can be hidden in, for example, PNG files. Less common are Android bootkits—there's not many around. What they do is hijack the Android init framework—alteering system programs and daemons, then deletes itself. For example, the DKF Bootkit (China). Android App Problems: no code signing! all self-signed native code execution permission sandbox — all or none alternate market places no robust Android malware detection at network level delayed patch process Programming Weird Machines with ELF Metadata Rebecca "bx" Shapiro, Dartmouth College, NH https://github.com/bx/elf-bf-tools @bxsays on twitter Definitions. "ELF" is an executable file format used in linking and loading executables (on UNIX/Linux-class machines). "Weird machine" uses undocumented computation sources (I think of them as unintended virtual machines). Some examples of "weird machines" are those that: return to weird location, does SQL injection, corrupts the heap. Bx then talked about using ELF metadata as (an uintended) "weird machine". Some ELF background: A compiler takes source code and generates a ELF object file (hello.o). A static linker makes an ELF executable from the object file. A runtime linker and loader takes ELF executable and loads and relocates it in memory. The ELF file has symbols to relocate functions and variables. ELF has two relocation tables—one at link time and another one at loading time: .rela.dyn (link time) and .dynsym (dynamic table). GOT: Global Offset Table of addresses for dynamically-linked functions. PLT: Procedure Linkage Tables—works with GOT. The memory layout of a process (not the ELF file) is, in order: program (+ heap), dynamic libraries, libc, ld.so, stack (which includes the dynamic table loaded into memory) For ELF, the "weird machine" is found and exploited in the loader. ELF can be crafted for executing viruses, by tricking runtime into executing interpreted "code" in the ELF symbol table. One can inject parasitic "code" without modifying the actual ELF code portions. Think of the ELF symbol table as an "assembly language" interpreter. It has these elements: instructions: Add, move, jump if not 0 (jnz) Think of symbol table entries as "registers" symbol table value is "contents" immediate values are constants direct values are addresses (e.g., 0xdeadbeef) move instruction: is a relocation table entry add instruction: relocation table "addend" entry jnz instruction: takes multiple relocation table entries The ELF weird machine exploits the loader by relocating relocation table entries. The loader will go on forever until told to stop. It stores state on stack at "end" and uses IFUNC table entries (containing function pointer address). The ELF weird machine, called "Brainfu*k" (BF) has: 8 instructions: pointer inc, dec, inc indirect, dec indirect, jump forward, jump backward, print. Three registers - 3 registers Bx showed example BF source code that implemented a Turing machine printing "hello, world". More interesting was the next demo, where bx modified ping. Ping runs suid as root, but quickly drops privilege. BF modified the loader to disable the library function call dropping privilege, so it remained as root. Then BF modified the ping -t argument to execute the -t filename as root. It's best to show what this modified ping does with an example: $ whoami bx $ ping localhost -t backdoor.sh # executes backdoor $ whoami root $ The modified code increased from 285948 bytes to 290209 bytes. A BF tool compiles "executable" by modifying the symbol table in an existing ELF executable. The tool modifies .dynsym and .rela.dyn table, but not code or data. Privacy at the Handset: New FCC Rules? "Valkyrie" (Christie Dudley, Santa Clara Law JD candidate) Valkyrie talked about mobile handset privacy. Some background: Senator Franken (also a comedian) became alarmed about CarrierIQ, where the carriers track their customers. Franken asked the FCC to find out what obligations carriers think they have to protect privacy. The carriers' response was that they are doing just fine with self-regulation—no worries! Carriers need to collect data, such as missed calls, to maintain network quality. But carriers also sell data for marketing. Verizon sells customer data and enables this with a narrow privacy policy (only 1 month to opt out, with difficulties). The data sold is not individually identifiable and is aggregated. But Verizon recommends, as an aggregation workaround to "recollate" data to other databases to identify customers indirectly. The FCC has regulated telephone privacy since 1934 and mobile network privacy since 2007. Also, the carriers say mobile phone privacy is a FTC responsibility (not FCC). FTC is trying to improve mobile app privacy, but FTC has no authority over carrier / customer relationships. As a side note, Apple iPhones are unique as carriers have extra control over iPhones they don't have with other smartphones. As a result iPhones may be more regulated. Who are the consumer advocates? Everyone knows EFF, but EPIC (Electrnic Privacy Info Center), although more obsecure, is more relevant. What to do? Carriers must be accountable. Opt-in and opt-out at any time. Carriers need incentive to grant users control for those who want it, by holding them liable and responsible for breeches on their clock. Location information should be added current CPNI privacy protection, and require "Pen/trap" judicial order to obtain (and would still be a lower standard than 4th Amendment). Politics are on a pro-privacy swing now, with many senators and the Whitehouse. There will probably be new regulation soon, and enforcement will be a problem, but consumers will still have some benefit. Hacking Measured Boot and UEFI Dan Griffin, JWSecure, Inc., Seattle, @JWSdan Dan talked about hacking measured UEFI boot. First some terms: UEFI is a boot technology that is replacing BIOS (has whitelisting and blacklisting). UEFI protects devices against rootkits. TPM - hardware security device to store hashs and hardware-protected keys "secure boot" can control at firmware level what boot images can boot "measured boot" OS feature that tracks hashes (from BIOS, boot loader, krnel, early drivers). "remote attestation" allows remote validation and control based on policy on a remote attestation server. Microsoft pushing TPM (Windows 8 required), but Google is not. Intel TianoCore is the only open source for UEFI. Dan has Measured Boot Tool at http://mbt.codeplex.com/ with a demo where you can also view TPM data. TPM support already on enterprise-class machines. UEFI Weaknesses. UEFI toolkits are evolving rapidly, but UEFI has weaknesses: assume user is an ally trust TPM implicitly, and attached to computer hibernate file is unprotected (disk encryption protects against this) protection migrating from hardware to firmware delays in patching and whitelist updates will UEFI really be adopted by the mainstream (smartphone hardware support, bank support, apathetic consumer support) You Can't Buy Security: Building the Open Source InfoSec Program Boris Sverdlik, ISDPodcast.com co-host Boris talked about problems typical with current security audits. "IT Security" is an oxymoron—IT exists to enable buiness, uptime, utilization, reporting, but don't care about security—IT has conflict of interest. There's no Magic Bullet ("blinky box"), no one-size-fits-all solution (e.g., Intrusion Detection Systems (IDSs)). Regulations don't make you secure. The cloud is not secure (because of shared data and admin access). Defense and pen testing is not sexy. Auditors are not solution (security not a checklist)—what's needed is experience and adaptability—need soft skills. Step 1: First thing is to Google and learn the company end-to-end before you start. Get to know the management team (not IT team), meet as many people as you can. Don't use arbitrary values such as CISSP scores. Quantitive risk assessment is a myth (e.g. AV*EF-SLE). Learn different Business Units, legal/regulatory obligations, learn the business and where the money is made, verify company is protected from script kiddies (easy), learn sensitive information (IP, internal use only), and start with low-hanging fruit (customer service reps and social engineering). Step 2: Policies. Keep policies short and relevant. Generic SANS "security" boilerplate policies don't make sense and are not followed. Focus on acceptable use, data usage, communications, physical security. Step 3: Implementation: keep it simple stupid. Open source, although useful, is not free (implementation cost). Access controls with authentication & authorization for local and remote access. MS Windows has it, otherwise use OpenLDAP, OpenIAM, etc. Application security Everyone tries to reinvent the wheel—use existing static analysis tools. Review high-risk apps and major revisions. Don't run different risk level apps on same system. Assume host/client compromised and use app-level security control. Network security VLAN != segregated because there's too many workarounds. Use explicit firwall rules, active and passive network monitoring (snort is free), disallow end user access to production environment, have a proxy instead of direct Internet access. Also, SSL certificates are not good two-factor auth and SSL does not mean "safe." Operational Controls Have change, patch, asset, & vulnerability management (OSSI is free). For change management, always review code before pushing to production For logging, have centralized security logging for business-critical systems, separate security logging from administrative/IT logging, and lock down log (as it has everything). Monitor with OSSIM (open source). Use intrusion detection, but not just to fulfill a checkbox: build rules from a whitelist perspective (snort). OSSEC has 95% of what you need. Vulnerability management is a QA function when done right: OpenVas and Seccubus are free. Security awareness The reality is users will always click everything. Build real awareness, not compliance driven checkbox, and have it integrated into the culture. Pen test by crowd sourcing—test with logging COSSP http://www.cossp.org/ - Comprehensive Open Source Security Project What Journalists Want: The Investigative Reporters' Perspective on Hacking Dave Maas, San Diego CityBeat Jason Leopold, Truthout.org The difference between hackers and investigative journalists: For hackers, the motivation varies, but method is same, technological specialties. For investigative journalists, it's about one thing—The Story, and they need broad info-gathering skills. J-School in 60 Seconds: Generic formula: Person or issue of pubic interest, new info, or angle. Generic criteria: proximity, prominence, timeliness, human interest, oddity, or consequence. Media awareness of hackers and trends: journalists becoming extremely aware of hackers with congressional debates (privacy, data breaches), demand for data-mining Journalists, use of coding and web development for Journalists, and Journalists busted for hacking (Murdock). Info gathering by investigative journalists include Public records laws. Federal Freedom of Information Act (FOIA) is good, but slow. California Public Records Act is a lot stronger. FOIA takes forever because of foot-dragging—it helps to be specific. Often need to sue (especially FBI). CPRA is faster, and requests can be vague. Dumps and leaks (a la Wikileaks) Journalists want: leads, protecting ourselves, our sources, and adapting tools for news gathering (Google hacking). Anonomity is important to whistleblowers. They want no digital footprint left behind (e.g., email, web log). They don't trust encryption, want to feel safe and secure. Whistleblower laws are very weak—there's no upside for whistleblowers—they have to be very passionate to do it. Accessibility and Security or: How I Learned to Stop Worrying and Love the Halting Problem Anna Shubina, Dartmouth College Anna talked about how accessibility and security are related. Accessibility of digital content (not real world accessibility). mostly refers to blind users and screenreaders, for our purpose. Accessibility is about parsing documents, as are many security issues. "Rich" executable content causes accessibility to fail, and often causes security to fail. For example MS Word has executable format—it's not a document exchange format—more dangerous than PDF or HTML. Accessibility is often the first and maybe only sanity check with parsing. They have no choice because someone may want to read what you write. Google, for example, is very particular about web browser you use and are bad at supporting other browsers. Uses JavaScript instead of links, often requiring mouseover to display content. PDF is a security nightmare. Executible format, embedded flash, JavaScript, etc. 15 million lines of code. Google Chrome doesn't handle PDF correctly, causing several security bugs. PDF has an accessibility checker and PDF tagging, to help with accessibility. But no PDF checker checks for incorrect tags, untagged content, or validates lists or tables. None check executable content at all. The "Halting Problem" is: can one decide whether a program will ever stop? The answer, in general, is no (Rice's theorem). The same holds true for accessibility checkers. Language-theoretic Security says complicated data formats are hard to parse and cannot be solved due to the Halting Problem. W3C Web Accessibility Guidelines: "Perceivable, Operable, Understandable, Robust" Not much help though, except for "Robust", but here's some gems: * all information should be parsable (paraphrasing) * if not parsable, cannot be converted to alternate formats * maximize compatibility in new document formats Executible webpages are bad for security and accessibility. They say it's for a better web experience. But is it necessary to stuff web pages with JavaScript for a better experience? A good example is The Drudge Report—it has hand-written HTML with no JavaScript, yet drives a lot of web traffic due to good content. A bad example is Google News—hidden scrollbars, guessing user input. Solutions: Accessibility and security problems come from same source Expose "better user experience" myth Keep your corner of Internet parsable Remember "Halting Problem"—recognize false solutions (checking and verifying tools) Stop Patching, for Stronger PCI Compliance Adam Brand, protiviti @adamrbrand, http://www.picfun.com/ Adam talked about PCI compliance for retail sales. Take an example: for PCI compliance, 50% of Brian's time (a IT guy), 960 hours/year was spent patching POSs in 850 restaurants. Often applying some patches make no sense (like fixing a browser vulnerability on a server). "Scanner worship" is overuse of vulnerability scanners—it gives a warm and fuzzy and it's simple (red or green results—fix reds). Scanners give a false sense of security. In reality, breeches from missing patches are uncommon—more common problems are: default passwords, cleartext authentication, misconfiguration (firewall ports open). Patching Myths: Myth 1: install within 30 days of patch release (but PCI §6.1 allows a "risk-based approach" instead). Myth 2: vendor decides what's critical (also PCI §6.1). But §6.2 requires user ranking of vulnerabilities instead. Myth 3: scan and rescan until it passes. But PCI §11.2.1b says this applies only to high-risk vulnerabilities. Adam says good recommendations come from NIST 800-40. Instead use sane patching and focus on what's really important. From NIST 800-40: Proactive: Use a proactive vulnerability management process: use change control, configuration management, monitor file integrity. Monitor: start with NVD and other vulnerability alerts, not scanner results. Evaluate: public-facing system? workstation? internal server? (risk rank) Decide:on action and timeline Test: pre-test patches (stability, functionality, rollback) for change control Install: notify, change control, tickets McAfee Secure & Trustmarks — a Hacker's Best Friend Jay James, Shane MacDougall, Tactical Intelligence Inc., Canada "McAfee Secure Trustmark" is a website seal marketed by McAfee. A website gets this badge if they pass their remote scanning. The problem is a removal of trustmarks act as flags that you're vulnerable. Easy to view status change by viewing McAfee list on website or on Google. "Secure TrustGuard" is similar to McAfee. Jay and Shane wrote Perl scripts to gather sites from McAfee and search engines. If their certification image changes to a 1x1 pixel image, then they are longer certified. Their scripts take deltas of scans to see what changed daily. The bottom line is change in TrustGuard status is a flag for hackers to attack your site. Entire idea of seals is silly—you're raising a flag saying if you're vulnerable.

    Read the article

  • ASR / SNMP on Exadata

    - by rene.kundersma
    Recently I worked with ASR on Exadata for multiple customers. ASR is a great functionality that enables your 'systems' to alert Oracle when hardware failures occur. Sun hardware is using ASM for sometime and since 2009/2010 this is also available for Exadata. My goal is not to re-write the documentation so for general information I like to refer to this link. So, where is this note about ? Well, it is about two things I experienced around setting up ASR. I like to provide my experience so others can be successful with ASR fast as well. (It is however expected that things will be updated in the latest documentation.) First, imagine yourself configuring SNMP traps to be sent to ASR. In this situation be sure to not erase any existing SNMP Subscribers settings for example the subscription to Enterprise Manager Grid Control or whatever you already subscribed for. So, when you have documentation stating to execute "cellcli -e alter cell snmpSubscriber=(host=, port=)" be sure to add existing snmpSubscribers when they exist. The syntax allows this: snmpSubscriber= ((host=host [,port=port] [,community=community][,type=ASR]) [,(host=host[,port=port][,community=community][,type=ASR])...) Second, when configuring SnmpSubscribers using DCLI you have to work with a slash to escape the brackets. Be sure to verify your SNMP settings after setting them because you might end up with a bracket in the 'asrs.state' file stating 'public\' in stead of 'public'. Having the extra slash after the word 'public' of course doesn't help when sending SNMP-traps: dcli -g dbs_group -l root -n "/opt/oracle.cellos/compmon/exadata_mon_hw_asr.pl -validate_snmp_subscriber -type asr" cn38: Sending test trap to destination - 173.25.100.43:162 cn38: (1). count - 50 Failed to run "/usr/bin/snmptrap -v 2c -c public\ -M "+/opt/oracle.cellos/compmon/" -m SUN-HW-TRAP-MIB 173.25.100.43:162 "" SUN-HW- TRAP-MIB::sunHwTrapTestTrap sunHwTrapSystemIdentifier s " Sun Oracle Database Machine secret" sunHwTrapChassisId s "secret" sunHwTrapProductName s "SUN FIRE X4170 SERVER" sunHwTrapTestMessage s "This is a test trap. Exadata Compute Server: cn38.oracle.com "" cn38: getaddrinfo: +/opt/oracle.cellos/compmon/ Name or service not known cn38: snmptrap: Unknown host (+/opt/oracle.cellos/compmon/) All together ASR is a great addition to Exadata that I highly recommend. Some excellent documentation is written on the implementation details and available on MyOracleSupport. See "Oracle Database Machine Monitoring (Doc ID 1110675.1)" Rene Kundersma Technical Architect Oracle Technology Services

    Read the article

  • Oracle WebCenter Portal: Pagelet Producer – What’s New in 11.1.1.6.0 Release

    - by kellsey.ruppel
    Igor Plyakov, Sr. Principal Product Marketing Manager is back to share what's new in Oracle WebCenter Portal: Pagelet Producer. In February 2012 Oracle released 11g Release 1 (11.1.1.6.0) for WebCenter Portal. Pagelet Producer (aka Ensemble) that came out with this release added support for several new capabilities that are described in this post. As of 11.1.1.5.0 release the Pagelet Producer can expose WSRP and JPDK portlets as pagelets that can then be consumed in any portal or any third-party application that does not have a WSRP consumer. Now Pagelet Producer team is working on simplifying use of pagelets in WebCenter Sites. To expose WSRP portlets a new Producer should be registered with Pagelet Producer which can be done using Enterprise Manager, WLST or the Pagelet Producer Administration Console (for details see Section 25.9 of Administrator’s Guide for Oracle WebCenter Portal). If the producer requires authentication, Pagelet Producer allows you to select and use one of standard WSS token profiles.  After registration is finished a new resource is created and automatically populated with pagelets that represent the portlets associated with the WSRP endpoint.  For 11.1.1.6.0 release we completed extensive testing of consuming all WebCenter Services that are exposed as WSRP portlets by E2.0 Producer and delivery them as pagelets to WebCenter Interaction portal. In Pagelet Producer 11.1.1.6.0 release we added OpenSocial container that allows consuming gadgets from other OpenSocial containers, e.g. iGoogle, and expose them as pagelets. You can also use Pagelet Producer to host OpenSocial gadgets that could leverage OpenSocial APIs that it supports – People, Activities, Appdata and Pub-Sub features. Note that People and Activities expose the People Connections and Activity Stream from WebCenter Portal, i.e. to use these features Pagelet Producer requires connection to WebCenter Portal schema. Pub-Sub allows leveraging OpenAJAX Hub API for inter-gadget communication. In addition to these major new additions in Pagelet Producer 11.1.1.6.0 release we also extended several functional modules: The Clipping module was extended to support clipping of multiple regions on web resource page and then re-assembly of these separately clipped regions into a single pagelet. The auto-login feature can now be applied to web resources protected with Kerberos authentication; you would find this new functionality handy for consuming SharePoint web parts The logging module now supports full HTTP traffic between the Pagelet Producer and proxied web resource. At last, as the rest of WebCenter Portal stack the Pagelet Producer 11.1.1.6.0 can run on IBM WebSphere Application Server.

    Read the article

  • IIS 7&rsquo;s Sneaky Secret to Get COM-InterOp to Run

    - by David Hoerster
    Originally posted on: http://geekswithblogs.net/DavidHoerster/archive/2013/06/17/iis-7rsquos-sneaky-secret-to-get-com-interop-to-run.aspxIf you’re like me, you don’t really do a lot with COM components these days.  For me, I’ve been ‘lucky’ to stay in the managed world for the past 6 or 7 years. Until last week. I’m running a project to upgrade a web interface to an older COM-based application.  The old web interface is all classic ASP and lots of tables, in-line styles and a bunch of other late 90’s and early 2000’s goodies.  So in addition to updating the UI to be more modern looking and responsive, I decided to give the server side an update, too.  So I built some COM-InterOp DLL’s (easily through VS2012’s Add Reference feature…nothing new here) and built a test console line app to make sure the COM DLL’s were actually built according to the COM spec.  There’s a document management system that I’m thinking of whose COM DLLs were not proper COM DLLs and crashed and burned every time .NET tried to call them through a COM-InterOp layer. Anyway, my test app worked like a champ and I felt confident that I could build a nice façade around the COM DLL’s and wrap some functionality internally and only expose to my users/clients what they really needed. So I did this, built some tests and also built a test web app to make sure everything worked great.  It did.  It ran fine in IIS Express via Visual Studio 2012, and the timings were very close to the pure Classic ASP calls, so there wasn’t much overhead involved going through the COM-InterOp layer. You know where this is going, don’t you? So I deployed my test app to a DEV server running IIS 7.5.  When I went to my first test page that called the COM-InterOp layer, I got this pretty message: Retrieving the COM class factory for component with CLSID {81C08CAE-1453-11D4-BEBC-00500457076D} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)). It worked as a console app and while running under IIS Express, so it must be permissions, right?  I gave every account I could think of all sorts of COM+ rights and nothing, nada, zilch! Then I came across this question on Experts Exchange, and at the bottom of the page, someone mentioned that the app pool should be running to allow 32-bit apps to run.  Oh yeah, my machine is 64-bit; these COM DLL’s I’m using are old and are definitely 32-bit.  I didn’t check for that and didn’t even think about that.  But I went ahead and looked at the app pool that my web site was running under and what did I see?  Yep, select your app pool in IIS 7.x, click on Advanced Settings and check for “Enable 32-bit Applications”. I went ahead and set it to True and my test application suddenly worked. Hope this helps somebody out there from pulling out your hair.

    Read the article

  • New HTML 5 input types in ASP.Net 4.5 Developer Preview

    - by sreejukg
    Microsoft has released developer previews for Visual Studio 2011 and .Net framework 4.5. There are lots of new features available in the developer preview. One of the most interested things for web developers is the support introduced for new HTML 5 form controls. The following are the list of new controls available in HTML 5 email url number range Date pickers (date, month, week, time, datetime, datetime-local) search color Describing the functionality for these controls is not in the scope of this article. If you want to know about these controls, refer the below URLs http://msdn.microsoft.com/en-us/magazine/hh547102.aspx http://www.w3schools.com/html5/html5_form_input_types.asp ASP.Net 4.5 introduced more possible values to the Text Mode attribute to cater the above requirements. Let us evaluate these. I have created a project in Visual Studio 2011 developer preview, and created a page named “controls.aspx”. In the page I placed on Text box control from the toolbox Now select the control and go to the properties pane, look at the TextMode attribute. Now you can see more options are added here than prior versions of ASP.Net. I just selected Email as TextMode. I added one button to submit my page. The screen shot of the page in Visual Studio 2011 designer is as follows See the corresponding markup <form id="form1" runat="server">     <div>         Enter your email:         <asp:TextBox ID="TextBox1" runat="server" TextMode="Email"></asp:TextBox     </div>     <asp:Button ID="Button1" runat="server" Text="Submit" /> </form> Now let me run this page, IE 9 do not have the support for new form fields. I browsed the page using Firefox and the page appears as below. From the source of the rendered page, I saw the below markup for my email textbox <input name="TextBox1" type="email" id="TextBox1" /> Try to enter an invalid email and you will see the browser will ask you to enter a valid one by default. When rendered in non-supported browsers, these fields are behaving just as normal text boxes. So make sure you are using validation controls with these fields. See the browser support compatability matrix with these controls with various browser vendors. ASP.Net 4.5 introduced the support for these new form controls. You can build interactive forms using the newly added controls, keeping in mind that you need to validate the data for non-supported browsers.

    Read the article

  • Perform Unit Conversions with the Windows 7 Calculator

    - by Matthew Guay
    Want to easily convert area, volume, temperature, and many other units?  With the Calculator in Windows 7, it’s easy to convert most any unit into another. The New Calculator in Windows 7 Calculator received a visual overhaul in Windows 7, but at first glance it doesn’t seem to have any new functionality.  Here’s Windows 7’s Calculator on the left, with Vista’s calculator on the right.   But, looks can be deceiving.  Window’s 7’s calculator has lots of new exciting features.  Let’s try them out.  Simply type Calculator in the start menu search. To uncover the new features, click the View menu.  Here you can select many different modes, including Unit Conversion mode which we will look at. When you select the Unit Conversion mode, the Calculator will expand with a form on the left side. This conversions pane has 3 drop-down menus.  From the top one, select the type of unit you want to convert. In the next two menus, select which values you wish to convert to and from.  For instance, here we selected Temperature in the first menu, Degrees Fahrenheit in the second menu, and Degrees Celsius in the third menu. Enter the value you wish to convert in the From box, and the conversion will automatically appear in the bottom box. The Calculator contains dozens of conversion values, including more uncommon ones.  So if you’ve ever wanted to know how many US gallons are in a UK gallon, or how many knots a supersonic jet travels in an hour, this is a great tool for you!   Conclusion Windows 7 is filled with little changes that give you an all-around better experience in Windows to help you work more efficiently and productively.  With the new features in the Calculator, you just might feel a little smarter, too! Similar Articles Productive Geek Tips Add Windows Calculator to the Excel 2007 Quick Launch ToolbarEnjoy Quick & Easy Unit Conversion with Convert for WindowsCalculate with Qalculate on LinuxDisable the Annoying “This device can perform faster” Balloon Message in Windows 7Get stats on your Ruby on Rails code TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Install, Remove and HIDE Fonts in Windows 7 Need Help with Your Home Network? Awesome Lyrics Finder for Winamp & Windows Media Player Download Videos from Hulu Pixels invade Manhattan Convert PDF files to ePub to read on your iPad

    Read the article

  • TFS Auto Shelve - New Visual Studio 2010 / TFS 2010 Extension

    - by MikeParks
    We've been working with the Visual Studio 2010 SDK and the TFS 2010 SDK a lot recently to create new Visual Studio Extensions. You can find these extensions in the Visual Studio Gallery. If you're a developer/programmer, you should check it out, they have some pretty cool tools out there. I'd be surprised if you told me you went there and couldn't find any tools that could help you. One of the new extensions Cory and I made is called TFS Auto Shelve. Check out the description and read about it below. If you're interested and you have VS 2010 w/TFS 2010, feel free to try it out and let us know what you think. You can download it here: http://visualstudiogallery.msdn.microsoft.com/en-us/080540cb-e35f-4651-b71c-86c73e4a633d   Here's a description and screenshots of what it does: Automatically shelves the latest version of all pending changes from local TFS workspaces to the TFS Server every "x" number of minutes when solutions are opened.   ·         Purpose o    Created for Team Foundation Server 2010 and Visual Studio 2010 o    This tool is mainly aimed at the Programmer/Developer audience so they can always have the latest copy of their pending changes backed up to the TFS Server while coding ·         Functionality o    Menu options become active and automatic shelving begins when a solution that mapped to a TFS Workspace is opened in Visual Studio o    In Tools > TFS Auto Shelve (Running/NotRunning):  Automatic shelving can be turned on/off o    In Tools > TFS Auto Shelve Now : Shelve all code can be manually triggered o    Each TFS workspace has its own shelveset which is re-used to save the latest version of pending changes o    Shelvesets are named as Base Name + Workspace Name o    Shelveset comment contains item count o    If there are no pending changes, no shelvesets will be created/updated o    If a solution is opened that is not mapped to a TFS Workspace, menu options are disabled since shelving only works for mapped workspaces. ·         Configuration o    In Tools > Options > TFS Auto Shelve Options: Base Name is configurable o    In Tools > Options > TFS Auto Shelve Options: "x" number of minutes is configurable in options ·         Logging o    Custom Visual Studio Activity Logging is implemented. If you run into any errors, please startup Visual Studio with the /log switch, re-create the error, then close Visual Studio. You can browse to “%AppData%\Microsoft\VisualStudio\10.0\ActivityLog.XML” to view the log. Please feel free to inform us of any errors you see and we can work it out via email. ·         Other Helpful Information o    To view shelvesets, open Source Control Explorer, click on File > Source Control > Unshelve Pending Changes o    Workspaces can be modified by opening the Source Control Explorer > Clicking on Workspaces drop down > Click Workspaces… > Click Add / Edit / Removed   Thanks! - Mike

    Read the article

  • AspNetCompatibility in WCF Services &ndash; easy to trip up

    - by Rick Strahl
    This isn’t the first time I’ve hit this particular wall: I’m creating a WCF REST service for AJAX callbacks and using the WebScriptServiceHostFactory host factory in the service: <%@ ServiceHost Language="C#" Service="WcfAjax.BasicWcfService" CodeBehind="BasicWcfService.cs" Factory="System.ServiceModel.Activation.WebScriptServiceHostFactory" %>   to avoid all configuration. Because of the Factory that creates the ASP.NET Ajax compatible format via the custom factory implementation I can then remove all of the configuration settings that typically get dumped into the web.config file. However, I do want ASP.NET compatibility so I still leave in: <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="true"/> </system.serviceModel> in the web.config file. This option allows you access to the HttpContext.Current object to effectively give you access to most of the standard ASP.NET request and response features. This is not recommended as a primary practice but it can be useful in some scenarios and in backwards compatibility scenerios with ASP.NET AJAX Web Services. Now, here’s where things get funky. Assuming you have the setting in web.config, If you now declare a service like this: [ServiceContract(Namespace = "DevConnections")] #if DEBUG [ServiceBehavior(IncludeExceptionDetailInFaults = true)] #endif public class BasicWcfService (or by using an interface that defines the service contract) you’ll find that the service will not work when an AJAX call is made against it. You’ll get a 500 error and a System.ServiceModel.ServiceActivationException System error. Worse even with the IncludeExceptionDetailInFaults enabled you get absolutely no indication from WCF what the problem is. So what’s the problem?  The issue is that once you specify aspNetCompatibilityEnabled=”true” in the configuration you *have to* specify the AspNetCompatibilityRequirements attribute and one of the modes that enables or at least allows for it. You need either Required or Allow: [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Required)] without it the service will simply fail without further warning. It will also fail if you set the attribute value to NotAllowed. The following also causes the service to fail as above: [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.NotAllowed)] This is not totally unreasonable but it’s a difficult issue to debug especially since the configuration setting is global – if you have more than one service and one requires traditional ASP.NET access and one doesn’t then both must have the attribute specified. This is one reason why you’d want to avoid using this functionality unless absolutely necessary. WCF REST provides some basic access to some of the HTTP features after all, although what’s there is severely limited. I also wish that ServiceActivation errors would provide more error information. Getting an Activation error without further info on what actually is wrong is pretty worthless especially when it is a technicality like a mismatched configuration/attribute setting like this.© Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET  WCF  AJAX  

    Read the article

  • Software Architecture and Software Architecture Evaluation

    How many of us have worked at places where the concept of software architecture was ridiculed for wasting time and money? Even more ridiculous to them was the concept of evaluating software architecture. I think the next time that I am in this situation again, and I hope that I never am I will have to push for this methodology in the software development life cycle. I have spent way too many hours/days/months/years working poorly architected systems or systems that were just built ADHOC. This in software development must stop. I can understand why systems get like this due to overzealous sales staff, demanding management that wants everything yesterday, and project managers asking if things are done yet before the project has even started. But seriously, some time must be spent designing the applications that we write along with evaluating the architecture so that it will integrate will within the existing systems of an origination. If placed in this situation again, I will strive to gain buying from key players within the business, for example: Senior Software Engineers\Developers, Software Architects, Project Managers, Software Quality Assurance, Technical Services, Operations, and Finance in order for this idea to succeed with upper management. In order to convince these key players I will have to show them the benefits of architecture and even more benefits of evaluating software architecture on a system wide level. Benefits of Software Architecture Evaluation Places Stakeholders in the Same Room to Communicate Ensures Delivery of Detailed Quality Goals Prioritizes Conflicting Goals Requires Clear Explication Improves the Quality of Documentation Discovers Opportunities for Cross-Project Reuse Improves Architecture Practices Once I had key player buy in then and only then would I approach upper management about my plan regarding implementing the concept of software architecture and using evaluation to ensure that the software being designed is the proper architecture for the project. In addition to the benefits listed above I would also show upper management how much time is being wasted by not doing these evaluations. For example, if project X cost us Y amount, then why do we have several implementations in various forms of X and how much money and time could we have saved if we just reused the existing code base to give each system the same functionality that was already created? After this, I would mention what would happen if we had 50 instances of this situation? Then I would show them how the software architecture evaluation process would have prevented this and that the optimization could have leveraged its existing code base to increase the speed and quality of its development. References:Carnegie Mellon Software Engineering Institute (2011). Architecture Tradeoff Analysis Method from http://www.sei.cmu.edu/architecture/tools/evaluate/atam.cfm

    Read the article

< Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >