Search Results

Search found 8037 results on 322 pages for 'hardware hacking'.

Page 210/322 | < Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >

• Dell Dimension 2350 with a Pentium IV processor and integrated video and network chips running Fedor

  - by Jim Dobbs

  Dell Dimension 2350 with a Pentium IV processor and integrated video and network chips running Fedora12 does a "Sleeping Beauty" and I, apparently, am not am not a "handsome prince"! The system puts video and network to sleep and it will not wakeup. I have heard of this problem on laptops, but this is a tower. Any ideas or help is appreciated. I tried to ping the network card from another system and ping fails. The logs indicate that the system continues to be active. Pressing keyboard short-cut keys makes the disk light blink but neither the video or network card comes alive. Failing all else, are there any Linux commands that I could schedule in cron to pulse video and network adapters hourly that will keep them awake? Or, should I wait on Fedora13? Before this machine, I built a Dimension 2400 with Pentium IV and it had the same problem. Fedora9 on the same hardware is fine.

  Read the article

• XenServer/Center: Shared SRs for hosts not in same pool?

  - by 3molo

  I would like to use the same SRs on XenServer hosts that are not able to be part of the same pool (because of not having the exact same cpu feature set, if I understand it correctly) in order to share templates, being able to (manually) start a host on another node, backing up running hosts on other hardware etc etc. The technology for SR can be any of iSCSI, NFS or CIFS, iSCSI would obviously be preferred. Trying to add an iSCSI volume renders a "This LUN is already in use as SR iSCSI - Shared Storage on pool xxxxxx.". Adding a NFS share on one XS host, creating a template there and then checking another XS host reveals they don't agree on used space etc. Coming from a vSphere world this is quite baffling, but if these are limitations then I will have to rethink some of the concepts for this low budget project.

  Read the article

• Moving mails from SBS 2008 to SBS 2011

  - by starchx

  we are going to upgrade server from SBS 2008 to a new hardware server with SBS 2011. Due to non-experience in Server Migration (eg, answer file), we have decided to choose Clean Install. We have 12 users so that's not too bad. The most challenge problem is to move over all the emails for each user, some user have 5GB inbox. The one method I know is to login to each user account and export the emails to PST file using Outlook 2007. Then connect to new SBS 2011 and import the PST into new inbox. Do we have any other better/quicker ways? Thanks

  Read the article

• System time wrong after running ntpdate because DST ignored

  - by Ian Dunn

  When I run ntpdate, my system clock displays the time as an hour behind what it should be. I know that ntpdate does everything in UTC, so I'm guessing there's a timezone setting wrong and it's ignoring Daylight Savings Time, but I can't figure it out. Here's what I've done so far: ln -sf /usr/share/zoneinfo/EST /etc/localtime to set the timezone Set UTC=true in /etc/sysconfig/clock so that DST will be automatically applied date -s hh:mm::ss to set system clock correctly hwclock -systohc --utc to set the hardware clock correctly At this point date and hwclock both display the correct time. But if I then run ntpdate 0.us.pool.ntp.org, the date output is an hour behind what it should be. I've looked at a dozen tutorials and can't figure out what I'm doing wrong. Does anyone have any ideas?

  Read the article

• Having Troubles Getting My Apache Server Online(NodeJS and Apache)

  - by Jeff Armingol

  I am new here. This is my situation. I am using nodejs modules, serialport2 and socket.io, because I am trying to forward the data from my arduino hardware through serialports. In my server side script, I read the data then forward it to the client side. Now I am using Apache to serve the html page,which is the client side. I am running Nodejs on port 8000 and Apache on port 80. It is running OKAY when I view it in my browser typing localhost:80. The data is appearing and seems fine. Now when I tried to get my Apache server online using a Free DDNS provider(http://www.noip.com/) and my port80, it loaded the webpage but there are no data appearing on the page. What seems to be the problem here? Really need your expertise and advice. Thanks in advanced!

  Read the article

• Windows replacement for HAProxy

  - by GrayWizardx

  It does not appear that there is a similar question to this already posted, so I will go ahead and ask. I am working on a project that could benefit from having two - four servers handling incoming requests to a backend webservice. The service does not require SSL but does need to support occassional long running processes (upto 120 secs). This project does not at present have the funding to purchase a hardware load balancing solution. I have previously used HAProxy as a solution for this, and found it very simple and straightforward. Is there a similar product for windows (server 2003 or 2008) which provides similar configuration options and runs as a lightweight service? For reasons outside my control I cannot setup a Linux machine (physical or virtual) and so I am looking for behaviour that can be deployed on a windows machine. I can only find Perlbal which appears to fall into this category. So as not to keep this open indifenitely I will give credit to the only answer.

  Read the article

• the more DVDs at the same time , the slower the burning!

  - by sajad

  hi i'm using nero to burn multi DVDs at the same time. When i burn 1 DVD at one time it takes about 8 mins to finish. but when i try to burn 4 DVDs at the same time, it takes about 40 mins! why does it take too longe to burn multi DVDs at the same time? i don't have any problem with hardware because when i'm burning dvds , less than 20 % of my cpu & RAM are in use. thx in advance.

  Read the article

• Dual-WAN router

  - by aix

  I am looking for a router that would fit the following requirements: Two WAN interfaces: the primary is PPPoE, the secondary will link to a GigE port on another router (a 100Mbps link will suffice); Two (ideally four) GigE LAN ports; No requirement for a firewall; No requirement for Wi-Fi; Inexpensive. The plan for the two WAN interfaces is as follows. All outbound traffic will go to the primary, with exceptions based on destination IP/subnet or possibly on src+dest IPs/subnets. Such exceptions should be routed to the secondary. It would be very nice if, should the primary go down, the secondary would automatically take over for all outbound traffic. I am reasonably sure that I can put something together based on dd-wrt. However, I'd like to hear from you what alternatives are out there (especially something easier to set up for my use case, even if it means paying more for the hardware.)

  Read the article

• How to make phone calls using a pc, modem, headphone and no actual phone instrument

  - by user18151

  Hi, I have a phone landline connection and I DO NOT have a phone instrument. I connect the cable into my laptop, and want to make calls using my laptop. I have an HDA CX20561 modem. I seem to be able to dial number using dialer.exe, though nothing seems to happen. From Microsoft kb http://support.microsoft.com/kb/958143, it looks like dialer.exe alone is not enough for the call. Can somebody tell me how to make and receive phone call with whatever hardware I have, i.e. what software will I need. Thanks.

  Read the article

• BSOD constantly with same ntoskrnl.exe error and disk indicator is frozen

  - by Sheep

  BSOD constantly and the disk indicator is frozen. Error do not happen immediately, usually an hour after boot up. Here is the Minidump: Bug Check Code = 0x00000124 Caused By Driver = ntoskrnl.exe Caused By Address = ntoskrnl.exe+4b094c Crash Address = ntoskrnl.exe+4b094c Seems to be hardware problem, but I checked RAM, no error. I have two HDs installed, system is on SSD, data is on HDD. Checked SSD with the properties-tools-error-checking , no error. Re-installed several times, still happens even after removed HDD. Configuration: SSD: Crucial M4-CT064M4SSD2 with Firmware 0009 Intel HM65 CPU: i7-2630QM The SSD is set correctly, SATA III 6Gb/s enabled, and everything worked perfectly for nearly a year.

  Read the article

• How do I troubleshoot CanoScan LIDE20 on Ubuntu 9.10 in VirtualBox?

  - by kara-marfia

  This may be a VirtualBox question more than anything else. The host OS is Win7, which sees the scanner, but has no drivers for it. VirtualBox sees & recognizes the scanner as "Cannon Scan" and shows "state captured" when I hover over USB devices. Searching gives me many happy reports of this particular scanner being well supported, and that SANE should work with it immediately (also listedin the Supported Hardware List. I get "no devices available" from XSane... and I'm not sure where else I can check. I'd like to see if VirtualBox is telling the truth and find out if the USB port is actually being fed into the virtual OS. Can anyone point me in the right direction of where/how to do that in Ubuntu? Or other bright ideas. I'm starting with a little project to add some zing to my beginner linux studies - I'm sure I haven't checked some obvious things, because I don't know them yet. ;)

  Read the article

• ZFS SAS/SATA controller recommendations

  - by ewwhite

  I've been working with OpenSolaris and ZFS for 6 months, primarily on a Sun Fire x4540 and standard Dell and HP hardware. One downside to standard Perc and HP Smart Array controllers is that they do not have a true "passthrough" JBOD mode to present individual disks to ZFS. One can configure multiple RAID 0 arrays and get them working in ZFS, but it impacts hotswap capabilities (thus requiring a reboot upon disk failure/replacement). I'm curious as to what SAS/SATA controllers are recommended for home-brewed ZFS JBODs. In addition, how does battery-backed write cache (BBWC) play into the solution?

  Read the article

• Strange noise from my laptop when it is closed

  - by gotqn

  I am fan of powerfull PCs with huge wide screen monitors but I have bought an laptop as gift to my parents. This is the description: "second-handed" lenovo (and there is a sign "ThinkPad" Intel Core Duo CPU T6570 2.10 GHz 64 bits Windows 7 Ultimate and the issue is that when the laptop is turn on and then closed, after a interval of time (I am not sure how much exactly but I believe it is several hours) a strange noise come from the laptop. The noise is something like a "start-up" noise of old computers. I first thought this is some hardware issue but everything seems to work fine. Has anyone an idea what can cause this type of noise or a what can I do in order to track the problem down? I am not sure if this is a important thing, but the laptop is always connected to the power. Note: I have just noticed that the sound is generated again when the laptop is closed and then opened. Note: This is link to the audio - http://yourlisten.com/channel/content/16934332/WindowsStrangeNoise

  Read the article

• Distributed, Parallel, Fault-tolerant File System

  - by Eddified

  There are so many choices that it's hard to know where to start. My requirements are these: Runs on Linux Most of the files will be between 5-9 MB in size. There will also be a significant number of small-ish jpgs (100px x 100px). All of the files need to be available over http. Redundancy -- ideally it would provide the space efficiency similar to RAID 5 of 75% (in RAID 5 this would be calculated thus: with 4 identical disks, 25% of the space is used for parity = 75% efficent) Must support several petabytes of data scalable runs on commodity hardware In addition, I look for these qualities, though they are not "requirements": Stable, mature file system Lots of momentum and support etc I would like some input as to which file system works best for the given requirements. Some people at my organization are leaning towards MogileFS, but I'm not convinced of the stability and momentum of that project. GlusterFS and Lustre, based on my limited research, appear to be better supported... Thoughts?

  Read the article

• Installing 2 DDR3 Sticks in MB with 4 Slots

  - by The Sasquatch

  Hey everyone, I just put together my first system that uses DDR3 memory. The motherboard I got is an ASUS M4A77T/USB3 and it has 4 DDR3 RAM slots. Looking in the manual for the MB it doesn't say anything about how to install the RAM as far as matching the pairs goes. I have 2 4GB sticks of RAM, and whether I put the sticks next to each other (of the 4 RAM slots, there are two blue ones next to each other and 2 black ones next to each other) or space them apart, The BIOS still shows that I have 8GB installed. I have been getting an IRQL_NOT_LESS_OR_EQUAL BSOD error, and have read in some other places that it could be hardware/RAM related. Does the RAM need to go in the A1, A2 slots (different colored but both A), or the A1 B1 slots? (A1 B1 are both the lovely blue color.) Any help would be awesome. THANKS!

  Read the article

• Where does linux look for shared libs?

  - by EsbenP

  I am trying to get the ar command on an embedded ARM computer running linux. I want to install debian and openjdk. It is a headless system. This is a custom linux distribution provided by the hardware manufacturer. The debian installer is missing the ar command so i tried copying the binaries from the debian package, but when running ar I get error while loading shared libraries: libbfd-2.18.0-multiarch.20080103.so: cannot open shared object file: No such file or directory libbfd is also in the package. I tried linking it to /lib and /usr/lib but I get the same message when running. What is the best way to get debian and ar on a custom linux distro?

  Read the article

• How do I set up my own proxy server?

  - by NJTechGuy

  This website (abc.com) slowed access from our original IP address. How do I implement my own proxy server to hide my IP while browsing abc.com? Do I need special hardware/software combo to achieve this? If I can generate about 5 proxies and alternate amongst those 5 while browsing abc.com would be awesome. Please suggest. Thanks guys! p.s : I want to know if I can generate proxy IPs of the type 123.34.21.140 prot 80 on my own? I want to use those IP/port combos in my Python scripts (urllib2/set_proxy).

  Read the article

• ATI Radeon HD 5970 Display numbering issues

  - by Arindam Sen

  I have 2 computers on which i have ATI Radeon HD 5970 graphics card installed. There is 1 VGA out and 1 DVI out in it. When I connect my VGA out to a monitor on my 1st computer, it shows it as display 1 and when I connect my DVI out to a monitor it show it as display 2 (I am using extended display). When I do the same thing on my 2nd computer it shows just the opposite. The VGA out shows as display 2 and the DVI out shows as display 1. Is it a problem with the drivers or the hardware? (because the graphics card on both is exactly the same)

  Read the article

• XP Mode under Win 7 Professional: Windows Activation Update failure despite activated Windows

  - by Cristina

  I am trying to install Windows XP Mode from here: http://www.microsoft.com/windows/virtual-pc/download.aspx (the Hardware-Assisted Virtualization Detection Tool has given me the green for proceeding) Even though my Windows has been activated a year or so ago, the download button leads me to a splash screen saying "Windows validation required". I am next forced to download a WindowsActivationUpdate.exe which, after downloading some mysterious "update", fails with the error message "Update installation failed, error information 0x80070002" (rough translation from German). I've tried running it both normally and as Administrator. What could be the problem?

  Read the article

• Motherboard max memory supported

  - by Ashfame

  I have an Intel DG965RY motherboard and its specification says it supports 8GB with 533 or 667Mhz RAM sticks and only 4GB with 800Mhz RAM sticks. I am running a 64bit OS. I earlier had 2 X 1GB sticks (800Mhz), so I bought 2 X 2GB sticks (800Mhz) and I underclocked them in the settings to run at 667Mhz. Shouldn't it support all 6GB RAM now? It would be a bummer if I will specifically need 667Mhz sticks thinking that at the worst they will underclock and then run at 667Mhz. I tried this because I saw someone posted at some forum that he put in 4GB+ of RAM in the same board @ 800Mhz and the system uses it all. In my case (On Ubuntu), it only shows 3.2GB as of now (link to Question) so needed to confirm if this is a hardware limitation.

  Read the article

• Can I upgrade a Windows 2000 domain to 2008 and demote the 2000 server without clients attached?

  - by techie007

  Hi all, We're planning to replace a Windows 2000 domain controller with a new 2008 DC (new hardware). We've elected to take the route of getting the 2000 domain schema up-to-snuff, join the 2008 server, upgrade it to a DC, and after replication demote the 2000 server (eventually to be taken off-line). The goal being to not have to visit all the workstations, and limited domain down-time. :) We want bring the old server here and do all the backups, Domain prep, migration and role transfers here, and then (hopefully) just plop the new 2008 back in place after it's done, and join the 2000 server back as a member server (so we can then do folder migrations, etc.). Can this server work be done off-site, without the workstations attached? If we do this will anything need to be done to the clients, once the new DC is physically in place, so they contact the new 2008 DC; or will they just 'know' and continue on using the existing domain settings/user profiles, etc.? Thanks in advance! :)

  Read the article

• Debian Linux server hangs after a week or so

  - by Alex Flo

  I have 2 Debian Linux 6.0.4 servers that have a strange behaviour: after 5-7-10 days they hang. By this I mean the servers need to be restarted and before that ping won't answer. I've been struggling with this problem for a couple of months now and here's some thoughts/what I tried without being able to solve the problem. I changed the RAM on a server. Being 2 different servers I doubt that it could be something related to hardware as a 3rd identical server won't have this problem. I logged the server load and when it crashes the load is fine (quite low) I cannot find anything in the server logs, logs are fine till the server freezes. I don't have access to console unfortunately. While I have years of admin experience I have never encountered such an issue and right now I have no idea where else to investigate. If you have an idea of what I could try in order to fix the problem please share it with me:-)

  Read the article

• Recommendation for PCI SATA addon card?

  - by edmicman

  I have a couple of dead PCs from my wife's office that have working SATA HDDs. Sorry, I don't know if they're SATA I or II, just that they're SATA. Unfortunately, all my spare hardware at home is pretty old; all I have is IDE support. I was thinking I could get a PCI addon card on the cheap that would support SATA and put together a budget server of sorts to play with and be able to use those drives. So I've got a couple questions: After some searching it looks like I can get an addon card for ~20 bucks, but it looks like they're all SATA I? Would that matter? It looks like going to SATAII bumps the price up to $40-$60 or so. Are there any recommendations on a card to get?

  Read the article

• Why Standards Place Limits on Data Transfer Rates?

  - by Mehrdad

  This is a rather general question about hardware and standards in general: Why do they place limits on data transfer rates, and disallow manufacturers from exceeding those rates? (E.g. 100 Mbit/s for Wireless G, 150 Mbit/s for Wireless N, ...) Why not allow for some sort of handshake protocol, whereby the devices being connected agree upon the maximum throughput that they each support, and use that value instead? Why does there have to be a hard-coded limit, which would require a new standard for every single improvement to a data rate?

  Read the article

• How do I fix "Setup did not find any hard disk drives installed in your computer" error during Win X

  - by CT

  I just bought a nettop. It came with WinXP Home. I first installed Win 7 on it. I wasn't that happy with the performance so I decided to go back to XP. I am using an external dvd drive and a Win XP Pro disc. I boot from the dvd drive and during the install get this error: Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program. Setup cannot continue. To quit Setup, press F3. This is the nettop in question: http://www.newegg.com/Product/Product.aspx?Item=N82E16883103228

  Read the article

< Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >