Search Results

Search found 8037 results on 322 pages for 'hardware hacking'.

Page 211/322 | < Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >

• Mongodump on Gridfs is killing the host IOs

  - by Raphael

  I'm trying to make a mongodump from our production mongodb while the production is running. We have three production instances, one regular mongodb, one with very few gb of data on gridfs, one with a larger amount of data on gridfs. All mongodb instances are running in version 2.4.9 on a ubuntu 10.04 virtual server. I use a mongodump command to export the bases to another server. Unfortunately our machines are virtually hosted in a "low performances" datacenter (vmware based) so when I try to export the large gridfs db, the disk IO hits 100% (and 50% of the cpu starts waiting for IO too). This has a very negative impact on the production applicatiosn because db access time is excessively increased, making the applications unusable. I'm looking for a way to regulate the mongodump so the export goes slower but cooler on the hardware ressources allowing better performances for the applications to run. Has anyone had a similar scenario ?

  Read the article

• Why Standards Place Limits on Data Transfer Rates?

  - by Mehrdad

  This is a rather general question about hardware and standards in general: Why do they place limits on data transfer rates, and disallow manufacturers from exceeding those rates? (E.g. 100 Mbit/s for Wireless G, 150 Mbit/s for Wireless N, ...) Why not allow for some sort of handshake protocol, whereby the devices being connected agree upon the maximum throughput that they each support, and use that value instead? Why does there have to be a hard-coded limit, which would require a new standard for every single improvement to a data rate?

  Read the article

• Planning to buy a server with at least 48GB Ram, are the blades way to go?

  - by varchar1

  We're planning to host our website for the first time for ourselves. We have currently have a linode of 8 gigs and the memory is going up to 90% most of the time. So I want to move my website to my own server with huge RAM. So this will be first time to manage any physical hardware of a server. So I came across IBM's BladeCenter, found them interesting. So can I just buy the blade and run it? Or do I have to buy the chassis for sure? Also, do I need to buy an UPS? So how hard is it to setup? How about the hard drives? Can I setup them easily? Please advice.

  Read the article

• Currently well suited SATA2-SSDs for Laptop usage

  - by danilo

  I am looking for a solid state drive for my laptop. My dillemma: I have been waiting for the new Intel SSDs since Q3/2010, as I've heard they should be better and cheaper, due to lower memory manufacturing costs. Now it looks like the new Intel drives are very fast, but still expensive. I would still buy one of them if I could benefit from the full speed. My hardware only has a SATA-2 port though. Thus, my question: Is it worthwhile to buy one of those new Intel SSDs made for SATA-3 if I won't be able to use the full speed? Are there any other promising new SSDs that will be released soon? (Inside the next 1-2 months) If I wouldn't make a good deal buying the newer, faster drives, what drives can you recommend? I don't consider this question subjective, as I am mainly looking for answers concerning the SATA-2/SATA-3 conflict.

  Read the article

• Longlasting Macport installation

  - by user10826

  Hi, I use Macports on Mac OSX to install some software. But there are somethings that I find very strange. For instance, yesterday I installed some app. and the it needed to get gcc43 and compile completely from source! It took a lot of time, although now everything works right. I understand that compilation of everything in the gentoo spirit is eomthing nice, but in the Mac case, not necessary. There are ony sole hardware variations, so it will be easier to get the binaries. I wonder if Macporst can be forced to get the binaries when available and therefore avoid these time consuming compilations. Thanks

  Read the article

• How can I use a computer as a router and send all client traffic through anonymous proxies?

  - by Terrapin

  Is there a way that I can setup a spare box as a router on my network, and route client traffic through a proxy in order to hide my location? Specifically, I would like internet traffic to/from my Roku Box to be routed via proxy, but there is no proxy support built in to the Roku. So I would like wire my Roku directly my computer's second NIC, and force all traffic through a proxy. What kind of software and hardware setup will I need? Also, which anonymous proxy service are best for this purpose? I'm not interesting in full anonymity or encryption. I simply want to mask my location while providing the best possible throughput.

  Read the article

• TextMate - completion using an external file or file contained in project?

  - by Neil Baldwin

  Does anyone know how to get TextMate to search an external file (or even the files contained in a TextMate "project") with which to perform word completion? I'm coding some stuff on the C64 (using TextMate to write the code) and I have an external file containing labels for all of the hardware registers/kernal routines e.g VIC2InteruptStatus = $D019 It would be really handy to be able to type, say, 'VIC2I' then press the key for word completion and have TextMate find matches in the external library file. Rather than how I'm having to do it at the moment by opening the library file and copy-paste the register names into my code.

  Read the article

• windows 2003 - why can't serial port be accessed remotely?

  - by Danny Staple

  we have recently installed the updates on some of our servers, which have a bit of hardware attached via USB that presents itself as a serial (COM) port. The strange behaviour is that if I start a cmd shell on the server via VNC, I can open the serial port. If I run a service and start it from there (telnet, jenkins) then I receive a "not found" error for it. IE: C:\Documents and Settings\some_user>echo 1 >COM4: C:\Documents and Settings\some_user> on the local cmd will work, and on the remote telnet will give: C:\Documents and Settings\some_user>echo 1 >COM4: The system cannot find the file specified. C:\Documents and Settings\some_user> I cannot see any security settings on the Device manager settings panel for this device.

  Read the article

• System time wrong after running ntpdate because DST ignored

  - by Ian Dunn

  When I run ntpdate, my system clock displays the time as an hour behind what it should be. I know that ntpdate does everything in UTC, so I'm guessing there's a timezone setting wrong and it's ignoring Daylight Savings Time, but I can't figure it out. Here's what I've done so far: ln -sf /usr/share/zoneinfo/EST /etc/localtime to set the timezone Set UTC=true in /etc/sysconfig/clock so that DST will be automatically applied date -s hh:mm::ss to set system clock correctly hwclock -systohc --utc to set the hardware clock correctly At this point date and hwclock both display the correct time. But if I then run ntpdate 0.us.pool.ntp.org, the date output is an hour behind what it should be. I've looked at a dozen tutorials and can't figure out what I'm doing wrong. Does anyone have any ideas?

  Read the article

• CentOS send mail with external SMTP server and without local daemons

  - by Vilx-

  I've got a little old server with CentOS 6.5 on it. The hardware is old and crappy, but enough for what it has to do. Which consists of SSH (+SFTP), Apache, PHP and MySQL. Still, I'm trying to cut away all that I can. One thing that it does not need to do is to be an SMTP server. There are no mailboxes on it and nobody will ever route mail through it. However I do want it to send me an email when something goes wrong. Also, the webpages will send emails from PHP. So that brings me to the question - can I set up the mail system in such a way that there isn't an expensive mailer daemon sitting in the background with queues and whatnotelse, but rather every email is directly and immediately delivered to an external SMTP server? And how do I go about it?

  Read the article

• What would happen if I did a "Boot to VHD" to a VHD that was configured to run under Hyper-V?

  - by tbone

  Microsoft has a Hyper-V based VM I'm interested in running, however, I don't have access to a Windows Server 2008 machine to try it on, only a Windows 7 Pro x64 machine (Windows 7 does not support Hyper-V). This is the VM in question: This download contains three Windows Server 2008 R2 SP1 Hyper-V Virtual Machine set for evaluating and demonstrating Office 2010, SharePoint 2010 and Project Server 2010. 2010 Information Worker Demonstration and Evaluation Virtual Machine (SP1) http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=27417 I came across a somewhat relevant article from Scott Hanselman: Less Virtual, More Machine - Windows 7 and the magic of Boot to VHD: http://www.hanselman.com/blog/LessVirtualMoreMachineWindows7AndTheMagicOfBootToVHD.aspx I realize other options are to convert this VM to a VMWare compatible VM or some of the options to run it under VirtualBox. But instead of those routes, I'm wondering: What would happen if I tried to go the "Boot to VHD" route using this Hyper-V VHD? Is it possible that during the boot process, Windows would simply notice that hardware had changed and adjust accordingly, installing the appropriate drivers and continuing on without a hitch?

  Read the article

• BSOD constantly with same ntoskrnl.exe error and disk indicator is frozen

  - by Sheep

  BSOD constantly and the disk indicator is frozen. Error do not happen immediately, usually an hour after boot up. Here is the Minidump: Bug Check Code = 0x00000124 Caused By Driver = ntoskrnl.exe Caused By Address = ntoskrnl.exe+4b094c Crash Address = ntoskrnl.exe+4b094c Seems to be hardware problem, but I checked RAM, no error. I have two HDs installed, system is on SSD, data is on HDD. Checked SSD with the properties-tools-error-checking , no error. Re-installed several times, still happens even after removed HDD. Configuration: SSD: Crucial M4-CT064M4SSD2 with Firmware 0009 Intel HM65 CPU: i7-2630QM The SSD is set correctly, SATA III 6Gb/s enabled, and everything worked perfectly for nearly a year.

  Read the article

• Security tips for adding wireless AP to domain network?

  - by Cy

  I am researching best-practices for adding wireless to our existing domain network. My DHCP server is running Windows Server 03 Standard (not sure if thats useful). I am familiar with simple home networking but I thought I'd get some expert advice for the more advanced stuff. Any tips and / or best-practices? Is this Cisco Wireless Access Point a good option? Are there any additional hardware recommendations? Thank you in advance for your help.

  Read the article

• XP Mode under Win 7 Professional: Windows Activation Update failure despite activated Windows

  - by Cristina

  I am trying to install Windows XP Mode from here: http://www.microsoft.com/windows/virtual-pc/download.aspx (the Hardware-Assisted Virtualization Detection Tool has given me the green for proceeding) Even though my Windows has been activated a year or so ago, the download button leads me to a splash screen saying "Windows validation required". I am next forced to download a WindowsActivationUpdate.exe which, after downloading some mysterious "update", fails with the error message "Update installation failed, error information 0x80070002" (rough translation from German). I've tried running it both normally and as Administrator. What could be the problem?

  Read the article

• Should I quit using Ifconfig?

  - by Zhen

  With the servers that mount Infiniband cards, when I use the ifconfig command I have the warning: Ifconfig uses the ioctl access method to get the full address information, which limits hardware addresses to 8 bytes. Because Infiniband address has 20 bytes, only the first 8 bytes are displayed correctly. Ifconfig is obsolete! For replacement check ip. Should I quit using ifconfig? It is deprecated in favor of ip command? Or it will be update in the near future.

  Read the article

• Strange noise from my laptop when it is closed

  - by gotqn

  I am fan of powerfull PCs with huge wide screen monitors but I have bought an laptop as gift to my parents. This is the description: "second-handed" lenovo (and there is a sign "ThinkPad" Intel Core Duo CPU T6570 2.10 GHz 64 bits Windows 7 Ultimate and the issue is that when the laptop is turn on and then closed, after a interval of time (I am not sure how much exactly but I believe it is several hours) a strange noise come from the laptop. The noise is something like a "start-up" noise of old computers. I first thought this is some hardware issue but everything seems to work fine. Has anyone an idea what can cause this type of noise or a what can I do in order to track the problem down? I am not sure if this is a important thing, but the laptop is always connected to the power. Note: I have just noticed that the sound is generated again when the laptop is closed and then opened. Note: This is link to the audio - http://yourlisten.com/channel/content/16934332/WindowsStrangeNoise

  Read the article

• Cannot assign port 4 to WAN on TP-Link WR740N by DD-WRT wiki

  - by Victor Sergienko

  I'm following the DD-WRT instruction to get TP-Link WR740N v3's Port 4 on a different VLAN, but this doesn't happen. First, I have no "Setup VLANs" settinngs tab in DD-WRT v24-sp2 (07/20/12) std r19519. I can get Internet on Wi-Fi if assigning eth1 to "WAN Port", but then all Ethernet ports get on the same VLAN and any wired connection grabs the DHCP address and Internet connection from router. When following the "old" instruction, if I run, say, nvram set vlan2ports="2 5*", should there appear a new interface, vlan2, in ifconfig, after ifconfig vlan2 up? It doesn't - does it mean there is no support for different VLANs in my software/hardware? What am I missing? Is it impossible to create more VLANs on TP-Link740?

  Read the article

• Single device that can work as tablet and as desktop PC

  - by flow

  I have a macbook pro and an iPad 2. I tried to use iPad 2 for work when I am out of the office but this is not very comfortable since one has to sync documents, not all Os X Lion apps exist for iPad 2 and so on. I think a solution would be a single tablet device that at the office can be connected to some dock station and then I have the equivalent of my macbook, but when I am out of the office I can touch the screen and used the same applications while on the road. As far as I know the iPad 2 does not and will not allow this. Therefore I wonder if you could recommend me another hardware/tablet/etc that could work this way now as of March 2012.

  Read the article

• How can I to take an HDMI TV broadcast and overlay text in real time?

  - by ObligatoryMoniker

  Our company wants to be able to have LCD TVs displaying TV with the ability to add an overlay, like a stock ticker at the bottom of the screen, where human resources can add content to be displayed. I have been trying to nail down the correct terminology for this and come across terms like Keying, Compositing, Live Broadcast Graphics Presentation, and Hardware Overlay but I don't know which of these terms is truly the correct way to refer to what I am trying to do. Black Magic offers a product that seems like it can do what I am looking for but their product seems like it is geared for a totally different purpose than what I would be using it for. Compix also seems to have a product that would do what I need but again it seems like killing a fly with a sledge hammer. How can I to take an HDMI TV broadcast and overlay arbitrary content in real time?

  Read the article

• Using Windows 7 XP Mode for games

  - by Josefvz

  Hi all. I have Win 7 (x64) at home and I want to play some old games (specifically Lands of Lore 3, but also some others). This game does not work properly on Win 7, and there are no patches that I'm aware of to fix its issues. Can I use XP Mode to play this game (and other non Win 7 nice games), or is there a better way? I only have one PC and dual booting scares me... (so no to dual booting!) Another question: Will I have full hardware support (full use of my graphics card, etc) when I use DOSbox or a VM? I have decided to go with VirtualBox or vmware, I'll check which one gives the best performance, thanks for your input!

  Read the article

• PC wont boot with more than 1 stick of RAM.

  - by Aidan

  Hi Guys, I've got the following computer and I've just put in a new CPU QX9650 and I've run into this problem since making this hardware change. Whenever I put more than 1 of my 4 sticks of ram into my machine it wont load an OS. It'll go through the BIOS but BSOD on windows load. It also wont let me install an OS from disk or boot into Linux. I've ran memtest with all 4 sticks in and I get 10k+ errors on test5. Each stick of ram on it's own is fine and functions properly. I only have problems when all 4 sticks are in the machine at the same time. System specs.. CPU: QX9650 Mobo: Asus P5B 2104 BIOS RAM: 2xPC25400 DDR2 , 2xPC2 6400 both OCZ. Is the problem on my end or is the CPU faulty?

  Read the article

• PC wont boot with more than 1 stick of RAM.

  - by Aidan

  Hi Guys, I've got the following computer and I've just put in a new CPU QX9650 and I've run into this problem since making this hardware change. Whenever I put more than 1 of my 4 sticks of ram into my machine it wont load an OS. It'll go through the BIOS but BSOD on windows load. It also wont let me install an OS from disk or boot into Linux. I've ran memtest with all 4 sticks in and I get 10k+ errors on test5. Each stick of ram on it's own is fine and functions properly. I only have problems when all 4 sticks are in the machine at the same time. System specs.. CPU: QX9650 Mobo: Asus P5B 2104 BIOS RAM: 2xPC25400 DDR2 , 2xPC2 6400 both OCZ. Is the problem on my end or is the CPU faulty?

  Read the article

• diagnostic software for wifi adapter

  - by Nathan Fellman

  I'm having trouble with my wifi connection. Is there any software out there that can help me determine if the problem is in the drivers or in the hardware? Regretfully, I'm working on Vista Edit: The problem I'm having is that the Vista reports that the wireless radio is connected, shows an IP and all, the router also shows that the computer is connected, but there's no connectivity. I can't logon to the router, and I can't even ping it. When I ping it I get the response: General Failure I have tried connecting with and without various wireless security protocols. I have tried disabling the wireless adapter and re-enabling it from the Device Manager I have tried updating the driver None of this has helped. When I connect via Ethernet (with a cable, that is), everything works fine. Edit: I'm not using any firewall on the computer, that I'm aware of. The IP address for the WIFI adapter is similar to the one for the LAN adapter. They differ by one.

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  Crossposted from here I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

< Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >