Search Results

Search found 7175 results on 287 pages for 'asynchronous processing'.

Page 211/287 | < Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >

• Exadata support for ACFS (and thus, 10gR2) now available!

  - by Robert Freeman

  Really? Exadata, ACFS and 10gR2? If you work with Exadata you are probably aware that ACFS has not been supported - until now! ACFS is now supported on Exadata if you are running Grid Infrastructure version 12.1.0.2 or later. This new support is described in MOS note 1326938.1. Also Exadata support for ACFS is mentioned in MOS note 888828.1, which is the king of all Exadata notes on MOS. The upshot is that you can now run Oracle Database 10gR2 on Exadata using ACFS as the storage for the Oracle Database. Don’t Over React and just Throw Everything on ACFS!First, let’s be clear that ACFS is not an alternative for running your Exadata databases on ASM. If you are running any production or non-production performance sensitive Oracle databases on 11.2 or 12.1, then you should be running them on ASM disks that are associated with the storage cells. The use case for ACFS is generally limited to the following: Running any Oracle 10gR2 databases on Exadata. Running Oracle 11gR2 development or test databases that require rapid cloning, and that do not require the performance benefits of the Exadata storage cells. If you are running Oracle Database 12c and you need snapshot/clone kinds of capabilities, then you should be using Oracle MultiTennant and the features present in that option (remember though that MultiTennant is a licensed option). The Fine PrintThere are some requirements that you will need to meet If you are going to run ACFS on Exadata. These are: You have to use Oracle Linux You must use GI 12.1.0.2 or later If you wish to use HCC then you must apply the fix for bug 19136936 to your system. This bug, and it’s associated patch do not appear on MOS (as of the time that I wrote this) so you will need to open an SR and get support to provide the patch for you. The Best Use Case for ACFSEven though Oracle Database 10gR2 is at end of life, it remains in use in a large number of places. This has caused problems when choosing to implement Exadata as a consolidation platform, or when choosing it during a hardware refresh process. Now that ACFS is supported, Exadata has become even more flexible and affords customers greater flexibility when migrating to Exadata and Engineered Systems. While all of the features of Exadata might not be available to a 10.2.0.4 database, certainly just the improved processing capabilities of Exadata with its fast as heck infiniband network fabric, additional memory, reduced power requirements and a whole host of other features, justifies moving these databases to Exadata now. This will also make it easier to upgrade these databases when the time comes!

  Read the article

• Big Data – Interacting with Hadoop – What is PIG? – What is PIG Latin? – Day 16 of 21

  - by Pinal Dave

  In yesterday’s blog post we learned the importance of the HIVE in Big Data Story. In this article we will understand what is PIG and PIG Latin in Big Data Story. Yahoo started working on Pig for their application deployment on Hadoop. The goal of Yahoo to manage their unstructured data. What is Pig and What is Pig Latin? Pig is a high level platform for creating MapReduce programs used with Hadoop and the language we use for this platform is called PIG Latin. The pig was designed to make Hadoop more user-friendly and approachable by power-users and nondevelopers. PIG is an interactive execution environment supporting Pig Latin language. The language Pig Latin has supported loading and processing of input data with series of transforming to produce desired results. PIG has two different execution environments 1) Local Mode – In this case all the scripts run on a single machine. 2) Hadoop – In this case all the scripts run on Hadoop Cluster. Pig Latin vs SQL Pig essentially creates set of map and reduce jobs under the hoods. Due to same users does not have to now write, compile and build solution for Big Data. The pig is very similar to SQL in many ways. The Ping Latin language provide an abstraction layer over the data. It focuses on the data and not the structure under the hood. Pig Latin is a very powerful language and it can do various operations like loading and storing data, streaming data, filtering data as well various data operations related to strings. The major difference between SQL and Pig Latin is that PIG is procedural and SQL is declarative. In simpler words, Pig Latin is very similar to SQ Lexecution plan and that makes it much easier for programmers to build various processes. Whereas SQL handles trees naturally, Pig Latin follows directed acyclic graph (DAG). DAGs is used to model several different kinds of structures in mathematics and computer science. DAG Tomorrow In tomorrow’s blog post we will discuss about very important components of the Big Data Ecosystem – Zookeeper. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• What micro web-framework has the lowest overhead but includes templating

  - by Simon Martin

  I want to rewrite a simple small (10 page) website and besides a contact form it could be written in pure html. It is currently built with classic asp and Dreamweaver templates. The reason I'm not simply writing 10 html pages is that I want to keep the layout all in 1 place so would need either includes or a masterpage. I don't want to use Dreamweaver templates, or batch processing (like org-mode) because I want to be able to edit using notepad (or Visual Studio) because occasionally I might need to edit a file on the server (Go Daddy's IIS admin interface will let me edit text). I don't want to use ASP.NET MVC or WebForms (which I use in my day job) because I don't need all the overhead they bring with them when essentially I'm serving up 9 static files, 1 contact form and 1 list of clubs (that I aim to use jQuery to filter). The shared hosting package I have on Go Daddy seems to take a long time to spin up when serving aspx files. Currently the clubs page is driven from an MS SQL database that I try to keep up to date by manually checking the dojo locator on the main HQ pages and editing the entries myself, this is again way over the top. I aim to get a text file with the club details (probably in JSON or xml format) and use that as the source for the clubs page. There will need to be a bit of programming for this as the HQ site is unable to provide an extract / feed so something will have to scrape the site periodically to update my clubs persistence file. I'd like that to be automated - but I'm happy to have that triggered on a visit to the clubs page so I don't need to worry about scheduling a job. I would probably have a separate process that updates the persistence that has nothing to do with the rest of the site. Ideally I'd like to use Mercurial (or git) to publish, I know Bitbucket (and github) both serve static page sites so they wouldn't work in this scenario (dynamic pages and a contact form) but that's the model I'd like to use if there is such a thing. My requirements are: Simple templating system, 1 place to define header, footers, menu etc., that can be edited using just notepad. Very minimal / lightweight framework. I don't need a monster for 10 pages Must run either on IIS7 (shared Go Daddy Windows hosting) or other free host

  Read the article

• SQL SERVER – Sharing your ETL Resources Across Applications with Ease

  - by pinaldave

  Frequently an organization will find that the same resources are used in multiple ETL applications, for example, the same database, general purpose processing logic, or file system locations.  Creating an easy way to reuse these resources across multiple applications would increase efficiency and reduce errors.  Moreover, not every ETL developer has the same skill set, and it is likely that one developer will be more adept at writing code while another is more comfortable configuring database connections.  Real productivity gains will come when these developers are able to work independently while still making their work available to others assigned to the same project.  These are the benefits of a centralized version control system. Of course, most version control systems could be used to store and serve files, but the real need is to store and serve entire ETL applications so that each developer’s ongoing work can immediately benefit from another developer’s completed work.  In other words, the version control system needs to be tightly integrated with the tools used to develop the ETL application. The following screen shot shows such a tool. Desktop ETL tool that tightly integrates with a central version control system Developers can checkout or commit entire projects or just a single artifact.  Each artifact may be managed independently so if you need to go back to an earlier version of one artifact, changes you may have made to other artifacts are not lost.  By being tightly integrated into the graphical environment used to create and edit the project artifacts, it is extremely easy and straight-forward to move your files to and from the version control system and there is no dependency on another vendor’s version control system.  The built in version control system is optimized for managing the artifacts of ETL applications. It is equally important that the version control system supports all of the actions one typically performs such as rollbacks, locking and unlocking of files, and the ability to resolve conflicts.  Note that this particular ETL tool also has the capability to switch back and forth between multiple version control systems. It also needs to be easy to determine the status of an artifact.  Not just that it has been committed or modified, but when and by whom.  Generally you must query the version control system for this information, but having it displayed within the development environment is more desirable. Who’s ETL tool works in this fashion?  Last month I mentioned the data integration solution offered by expressor software.  The version control features I described in this post are all available in their just released expressor 3.1 Standard Edition through the integration of their expressor Studio development environment with a centralized metadata repository and version control system. You can download their Studio application, which is free, or evaluate the full Standard Edition on your own hardware.  It may be worth your time. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Silverlight Cream for November 20, 2011 -- #1169

  - by Dave Campbell

  In this Issue: Andrea Boschin, Michael Crump, Michael Sync, WindowsPhoneGeek, Jesse Liberty, Derik Whittaker, Sumit Dutta, Jeff Blankenburg(-2-), and Beth Massi. Above the Fold: WP7: "Silver VNC 1.0 for Windows Phone "Mango"" Andrea Boschin Metro/WinRT/W8: "Lighting up your C# Metro apps by being a Share Source" Derik Whittaker LightSwitch: "Using the Save and Query Pipeline to “Archive” Deleted Records" Beth Massi Shoutouts: Michael Palermo's latest Desert Mountain Developers is up Michael Washington's latest Visual Studio #LightSwitch Daily is up From SilverlightCream.com: Silver VNC 1.0 for Windows Phone "Mango" Andrea Boschin published the first release of his "Silver VNC" version 1.0 on CodePlex. Check out the video on the blog post to see the capabilities, then go grab it from CodePlex. Fixing a broken toolbox (In Visual Studio 2010 SP1) Not Silverlight or Metro, but near to us all is Visual Studio... read how Michael Crump resolves the 'broken' toolbox that we all get now and then Windows Phone 7 – USB Device Not Recognized Error Michael Sync is looking for ideas about an error he gets any time he updates his phone. Windows Phone Toolkit MultiselectList in depth| Part2: Data Binding WindowsPhoneGeek has up the second part of his tutorial series on the MultiselectList from the Windows Phone Toolkit... this part is about data binding, complete with lots of code, discussion, pictures, and project to download New Mini-Tutorial Video Series Jesse Liberty started a new video series based on his Mango Mini tutorials. They will be on Channel 9, and he has a link on this post to the index. The firs of the series is on animation without code Lighting up your C# Metro apps by being a Share Source Derik Whittaker continues investigating Metro with this post about how to set your app up to share its content with other apps Part 21 - Windows Phone 7 - Toast Push Notification Sumit Dutta has part 21 of his WP7 series up and is talking about Toast Notification by creating a Windows form app for sending notifications to the WP7 app for viewing 31 Days of Mango | Day #6: Motion Jeff Blankenburg's Day 6 in his Mango series is about the Motion class which combines the data we get from the Accelerometer, Compass, and Gyroscope of the last couple days of posts 31 Days of Mango | Day #7: Raw Camera Data In Day 7, Jeff Blankenburg talks about the Camera on the WP7 and how to use the raw data in your own application Using the Save and Query Pipeline to “Archive” Deleted Records Beth Massi's latest LightSwith post is this one on tapping into the Save and Query pipelines to perform some data processing prior to saving or pulling data Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Idea to develop a caching server between IIS and SQL Server

  - by John

  I work on a few high traffic websites that all share the same database and that are all heavily database driven. Our SQL server is max-ed out and, although we have already implemented many changes that have helped but the server is still working too hard. We employ some caching in our website but the type of queries we use negate using SQL dependency caching. We tried SQL replication to try and kind of load balance but that didn't prove very successful because the replication process is quite demanding on the servers too and it needed to be done frequently as it is important that data is up to date. We do use a Varnish web caching server (Linux based) to take a bit of the load off both the web and database server but as a lot of the sites are customised based on the user we can only do so much. Anyway, the reason for this question... Varnish gave me an idea for a possible application that might help in this situation. Just like Varnish sits between a web browser and the web server and caches response from the web server, I was wondering about the possibility of creating something that sits between the web server and the database server. Imagine that all SQL queries go through this SQL caching server. If it's a first time query then it will get recorded, and the result requested from the SQL server and stored locally on the cache server. If it's a repeat request within a set time then the result gets retrieved from the local copy without the query being sent to the SQL server. The caching server could also take advantage of SQL dependency caching notifications. This seems like a good idea in theory. There's still the same amount of data moving back and forward from the web server, but the SQL server is relieved of the work of processing the repeat queries. I wonder about how difficult it would be to build a service that sort of emulates requests and responses from SQL server, whether SQL server's own caching is doing enough of this already that this wouldn't be a benefit, or even if someone has done this before and I haven't found it? I would welcome any feedback or any references to any relevant projects.

  Read the article

• F# for the C# Programmer

  - by mbcrump

  Are you a C# Programmer and can’t make it past a day without seeing or hearing someone mention F#?  Today, I’m going to walk you through your first F# application and give you a brief introduction to the language. Sit back this will only take about 20 minutes. Introduction Microsoft's F# programming language is a functional language for the .NET framework that was originally developed at Microsoft Research Cambridge by Don Syme. In October 2007, the senior vice president of the developer division at Microsoft announced that F# was being officially productized to become a fully supported .NET language and professional developers were hired to create a team of around ten people to build the product version. In September 2008, Microsoft released the first Community Technology Preview (CTP), an official beta release, of the F# distribution . In December 2008, Microsoft announced that the success of this CTP had encouraged them to escalate F# and it is now will now be shipped as one of the core languages in Visual Studio 2010 , alongside C++, C# 4.0 and VB. The F# programming language incorporates many state-of-the-art features from programming language research and ossifies them in an industrial strength implementation that promises to revolutionize interactive, parallel and concurrent programming. Advantages of F# F# is the world's first language to combine all of the following features: Type inference: types are inferred by the compiler and generic definitions are created automatically. Algebraic data types: a succinct way to represent trees. Pattern matching: a comprehensible and efficient way to dissect data structures. Active patterns: pattern matching over foreign data structures. Interactive sessions: as easy to use as Python and Mathematica. High performance JIT compilation to native code: as fast as C#. Rich data structures: lists and arrays built into the language with syntactic support. Functional programming: first-class functions and tail calls. Expressive static type system: finds bugs during compilation and provides machine-verified documentation. Sequence expressions: interrogate huge data sets efficiently. Asynchronous workflows: syntactic support for monadic style concurrent programming with cancellations. Industrial-strength IDE support: multithreaded debugging, and graphical throwback of inferred types and documentation. Commerce friendly design and a viable commercial market. Lets try a short program in C# then F# to understand the differences. Using C#: Create a variable and output the value to the console window: Sample Program. using System;   namespace ConsoleApplication9 {     class Program     {         static void Main(string[] args)         {             var a = 2;             Console.WriteLine(a);             Console.ReadLine();         }     } } A breeze right? 14 Lines of code. We could have condensed it a bit by removing the “using” statment and tossing the namespace. But this is the typical C# program. Using F#: Create a variable and output the value to the console window: To start, open Visual Studio 2010 or Visual Studio 2008. Note: If using VS2008, then please download the SDK first before getting started. If you are using VS2010 then you are already setup and ready to go. So, click File-> New Project –> Other Languages –> Visual F# –> Windows –> F# Application. You will get the screen below. Go ahead and enter a name and click OK. Now, you will notice that the Solution Explorer contains the following: Double click the Program.fs and enter the following information. Hit F5 and it should run successfully. Sample Program. open System let a = 2        Console.WriteLine a As Shown below: Hmm, what? F# did the same thing in 3 lines of code. Show me the interactive evaluation that I keep hearing about. The F# development environment for Visual Studio 2010 provides two different modes of execution for F# code: Batch compilation to a .NET executable or DLL. (This was accomplished above). Interactive evaluation. (Demo is below) The interactive session provides a > prompt, requires a double semicolon ;; identifier at the end of a code snippet to force evaluation, and returns the names (if any) and types of resulting definitions and values. To access the F# prompt, in VS2010 Goto View –> Other Window then F# Interactive. Once you have the interactive window type in the following expression: 2+3;; as shown in the screenshot below: I hope this guide helps you get started with the language, please check out the following books for further information. F# Books for further reading   Foundations of F# Author: Robert Pickering An introduction to functional programming with F#. Including many samples, this book walks through the features of the F# language and libraries, and covers many of the .NET Framework features which can be leveraged with F#.       Functional Programming for the Real World: With Examples in F# and C# Authors: Tomas Petricek and Jon Skeet An introduction to functional programming for existing C# developers written by Tomas Petricek and Jon Skeet. This book explains the core principles using both C# and F#, shows how to use functional ideas when designing .NET applications and presents practical examples such as design of domain specific language, development of multi-core applications and programming of reactive applications.

  Read the article

• The Work Order Printing Challenge

  - by celine.beck

  One of the biggest concerns we've heard from maintenance practitioners is the ability to print and batch print work order details along with its accompanying attachments. Indeed, maintenance workers traditionally rely on work order packets to complete their job. A standard work order packet can include a variety of information like equipment documentation, operating instructions, checklists, end-of-task feedback forms and the likes. Now, the problem is that most Asset Lifecycle Management applications do not provide a simple and efficient solution for process printing with document attachments. Work order forms can be easily printed but attachments are usually left out of the printing process. This sounds like a minor problem, but when you are processing high volume of work orders on a regular basis, this inconvenience can result in important inefficiencies. In order to print work order and its related attachments, maintenance personnel need to print the work order details and then go back to the work order and open each individual attachment using the proper authoring application to view and print each document. The printed output is collated into a work order packet. The AutoVue Document Print Service products that were just released in April 2010 aim at helping organizations address the work order printing challenge. Customers and partners can leverage the AutoVue Document Print Services to build a complete printing solution that complements their existing print server solution with AutoVue's document- and platform-agnostic document print services. The idea is to leverage AutoVue's printing services to invoke printing either programmatically or manually directly from within the work order management application, and efficiently process the printing of complete work order packets, including all types of attachments, from office files to more advanced engineering documents like 2D CAD drawings. Oracle partners like MIPRO Consulting, specialists in PeopleSoft implementations, have already expressed interest in the AutoVue Document Print Service products for their ability to offer print services to the PeopleSoft ALM suite, so that customers are able to print packages of documents for maintenance personnel. For more information on the subject, please consult MIPRO Consulting's article entitled Unsung Value: Primavera and AutoVue Integration into PeopleSoft posted on their blog. The blog post entitled Introducing AutoVue Document Print Service provides additional information on how the solution works. We would also love to hear what your thoughts are on the topic, so please do not hesitate to post your comments/feedback on our blog. Related Articles: Introducing AutoVue Document Print Service Print Any Document Type with AutoVue Document Print Services

  Read the article

• Oracle’s Sun Server X4-8 with Built-in Elastic Computing

  - by kgee

  We are excited to announce the release of Oracle's new 8-socket server, Sun Server X4-8. It’s the most flexible 8-socket x86 server Oracle has ever designed, and also the most powerful. Not only does it use the fastest Intel® Xeon® E7 v2 processors, but also its memory, I/O and storage subsystems are all designed for maximum performance and throughput. Like its predecessor, the Sun Server X4-8 uses a “glueless” design that allows for maximum performance for Oracle Database, while also reducing power consumption and improving reliability. The specs are pretty impressive. Sun Server X4-8 supports 120 cores (or 240 threads), 6 TB memory, 9.6 TB HDD capacity or 3.2 TB SSD capacity, contains 16 PCIe Gen 3 I/O expansion slots, and allows for up to 6.4 TB Sun Flash Accelerator F80 PCIe Cards. The Sun Server X4-8 is also the most dense x86 server with its 5U chassis, allowing 60% higher rack-level core and DIMM slot density than the competition.  There has been a lot of innovation in Oracle’s x86 product line, but the latest and most significant is a capability called elastic computing. This new capability is built into each Sun Server X4-8.   Elastic computing starts with the Intel processor. While Intel provides a wide range of processors each with a fixed combination of core count, operational frequency, and power consumption, customers have been forced to make tradeoffs when they select a particular processor. They have had to make educated guesses on which particular processor (core count/frequency/cache size) will be best suited for the workload they intend to execute on the server.Oracle and Intel worked jointly to define a new processor, the Intel Xeon E7-8895 v2 for the Sun Server X4-8, that has unique characteristics and effectively combines the capabilities of three different Xeon processors into a single processor. Oracle system design engineers worked closely with Oracle’s operating system development teams to achieve the ability to vary the core count and operating frequency of the Xeon E7-8895 v2 processor with time without the need for a system level reboot.  Along with the new processor, enhancements have been made to the system BIOS, Oracle Solaris, and Oracle Linux, which allow the processors in the system to dynamically clock up to faster speeds as cores are disabled and to reach higher maximum turbo frequencies for the remaining active cores. One customer, a stock market trading company, will take advantage of the elastic computing capability of Sun Server X4-8 by repurposing servers between daytime stock trading activity and nighttime stock portfolio processing, daily, to achieve maximum performance of each workload.To learn more about Sun Server X4-8, you can find more details including the data sheet and white papers here.Josh Rosen is a Principal Product Manager for Oracle’s x86 servers, focusing on Oracle’s operating systems and software. He previously spent more than a decade as a developer and architect of system management software. Josh has worked on system management for many of Oracle's hardware products ranging from the earliest blade systems to the latest Oracle x86 servers.

  Read the article

• Using TPL and PLINQ to raise performance of feed aggregator

  - by DigiMortal

  In this posting I will show you how to use Task Parallel Library (TPL) and PLINQ features to boost performance of simple RSS-feed aggregator. I will use here only very basic .NET classes that almost every developer starts from when learning parallel programming. Of course, we will also measure how every optimization affects performance of feed aggregator. Feed aggregator Our feed aggregator works as follows: Load list of blogs Download RSS-feed Parse feed XML Add new posts to database Our feed aggregator is run by task scheduler after every 15 minutes by example. We will start our journey with serial implementation of feed aggregator. Second step is to use task parallelism and parallelize feeds downloading and parsing. And our last step is to use data parallelism to parallelize database operations. We will use Stopwatch class to measure how much time it takes for aggregator to download and insert all posts from all registered blogs. After every run we empty posts table in database. Serial aggregation Before doing parallel stuff let’s take a look at serial implementation of feed aggregator. All tasks happen one after other. internal class FeedClient {     private readonly INewsService _newsService;     private const int FeedItemContentMaxLength = 255;       public FeedClient()     {          ObjectFactory.Initialize(container =>          {              container.PullConfigurationFromAppConfig = true;          });           _newsService = ObjectFactory.GetInstance<INewsService>();     }       public void Execute()     {         var blogs = _newsService.ListPublishedBlogs();           for (var index = 0; index <blogs.Count; index++)         {              ImportFeed(blogs[index]);         }     }       private void ImportFeed(BlogDto blog)     {         if(blog == null)             return;         if (string.IsNullOrEmpty(blog.RssUrl))             return;           var uri = new Uri(blog.RssUrl);         SyndicationContentFormat feedFormat;           feedFormat = SyndicationDiscoveryUtility.SyndicationContentFormatGet(uri);           if (feedFormat == SyndicationContentFormat.Rss)             ImportRssFeed(blog);         if (feedFormat == SyndicationContentFormat.Atom)             ImportAtomFeed(blog);                 }       private void ImportRssFeed(BlogDto blog)     {         var uri = new Uri(blog.RssUrl);         var feed = RssFeed.Create(uri);           foreach (var item in feed.Channel.Items)         {             SaveRssFeedItem(item, blog.Id, blog.CreatedById);         }     }       private void ImportAtomFeed(BlogDto blog)     {         var uri = new Uri(blog.RssUrl);         var feed = AtomFeed.Create(uri);           foreach (var item in feed.Entries)         {             SaveAtomFeedEntry(item, blog.Id, blog.CreatedById);         }     } } Serial implementation of feed aggregator downloads and inserts all posts with 25.46 seconds. Task parallelism Task parallelism means that separate tasks are run in parallel. You can find out more about task parallelism from MSDN page Task Parallelism (Task Parallel Library) and Wikipedia page Task parallelism. Although finding parts of code that can run safely in parallel without synchronization issues is not easy task we are lucky this time. Feeds import and parsing is perfect candidate for parallel tasks. We can safely parallelize feeds import because importing tasks doesn’t share any resources and therefore they don’t also need any synchronization. After getting the list of blogs we iterate through the collection and start new TPL task for each blog feed aggregation. internal class FeedClient {     private readonly INewsService _newsService;     private const int FeedItemContentMaxLength = 255;       public FeedClient()     {          ObjectFactory.Initialize(container =>          {              container.PullConfigurationFromAppConfig = true;          });           _newsService = ObjectFactory.GetInstance<INewsService>();     }       public void Execute()     {         var blogs = _newsService.ListPublishedBlogs();                var tasks = new Task[blogs.Count];           for (var index = 0; index <blogs.Count; index++)         {             tasks[index] = new Task(ImportFeed, blogs[index]);             tasks[index].Start();         }           Task.WaitAll(tasks);     }       private void ImportFeed(object blogObject)     {         if(blogObject == null)             return;         var blog = (BlogDto)blogObject;         if (string.IsNullOrEmpty(blog.RssUrl))             return;           var uri = new Uri(blog.RssUrl);         SyndicationContentFormat feedFormat;           feedFormat = SyndicationDiscoveryUtility.SyndicationContentFormatGet(uri);           if (feedFormat == SyndicationContentFormat.Rss)             ImportRssFeed(blog);         if (feedFormat == SyndicationContentFormat.Atom)             ImportAtomFeed(blog);                }       private void ImportRssFeed(BlogDto blog)     {          var uri = new Uri(blog.RssUrl);          var feed = RssFeed.Create(uri);           foreach (var item in feed.Channel.Items)          {              SaveRssFeedItem(item, blog.Id, blog.CreatedById);          }     }     private void ImportAtomFeed(BlogDto blog)     {         var uri = new Uri(blog.RssUrl);         var feed = AtomFeed.Create(uri);           foreach (var item in feed.Entries)         {             SaveAtomFeedEntry(item, blog.Id, blog.CreatedById);         }     } } You should notice first signs of the power of TPL. We made only minor changes to our code to parallelize blog feeds aggregating. On my machine this modification gives some performance boost – time is now 17.57 seconds. Data parallelism There is one more way how to parallelize activities. Previous section introduced task or operation based parallelism, this section introduces data based parallelism. By MSDN page Data Parallelism (Task Parallel Library) data parallelism refers to scenario in which the same operation is performed concurrently on elements in a source collection or array. In our code we have independent collections we can process in parallel – imported feed entries. As checking for feed entry existence and inserting it if it is missing from database doesn’t affect other entries the imported feed entries collection is ideal candidate for parallelization. internal class FeedClient {     private readonly INewsService _newsService;     private const int FeedItemContentMaxLength = 255;       public FeedClient()     {          ObjectFactory.Initialize(container =>          {              container.PullConfigurationFromAppConfig = true;          });           _newsService = ObjectFactory.GetInstance<INewsService>();     }       public void Execute()     {         var blogs = _newsService.ListPublishedBlogs();                var tasks = new Task[blogs.Count];           for (var index = 0; index <blogs.Count; index++)         {             tasks[index] = new Task(ImportFeed, blogs[index]);             tasks[index].Start();         }           Task.WaitAll(tasks);     }       private void ImportFeed(object blogObject)     {         if(blogObject == null)             return;         var blog = (BlogDto)blogObject;         if (string.IsNullOrEmpty(blog.RssUrl))             return;           var uri = new Uri(blog.RssUrl);         SyndicationContentFormat feedFormat;           feedFormat = SyndicationDiscoveryUtility.SyndicationContentFormatGet(uri);           if (feedFormat == SyndicationContentFormat.Rss)             ImportRssFeed(blog);         if (feedFormat == SyndicationContentFormat.Atom)             ImportAtomFeed(blog);                }       private void ImportRssFeed(BlogDto blog)     {         var uri = new Uri(blog.RssUrl);         var feed = RssFeed.Create(uri);           feed.Channel.Items.AsParallel().ForAll(a =>         {             SaveRssFeedItem(a, blog.Id, blog.CreatedById);         });      }        private void ImportAtomFeed(BlogDto blog)      {         var uri = new Uri(blog.RssUrl);         var feed = AtomFeed.Create(uri);           feed.Entries.AsParallel().ForAll(a =>         {              SaveAtomFeedEntry(a, blog.Id, blog.CreatedById);         });      } } We did small change again and as the result we parallelized checking and saving of feed items. This change was data centric as we applied same operation to all elements in collection. On my machine I got better performance again. Time is now 11.22 seconds. Results Let’s visualize our measurement results (numbers are given in seconds). As we can see then with task parallelism feed aggregation takes about 25% less time than in original case. When adding data parallelism to task parallelism our aggregation takes about 2.3 times less time than in original case. More about TPL and PLINQ Adding parallelism to your application can be very challenging task. You have to carefully find out parts of your code where you can safely go to parallel processing and even then you have to measure the effects of parallel processing to find out if parallel code performs better. If you are not careful then troubles you will face later are worse than ones you have seen before (imagine error that occurs by average only once per 10000 code runs). Parallel programming is something that is hard to ignore. Effective programs are able to use multiple cores of processors. Using TPL you can also set degree of parallelism so your application doesn’t use all computing cores and leaves one or more of them free for host system and other processes. And there are many more things in TPL that make it easier for you to start and go on with parallel programming. In next major version all .NET languages will have built-in support for parallel programming. There will be also new language constructs that support parallel programming. Currently you can download Visual Studio Async to get some idea about what is coming. Conclusion Parallel programming is very challenging but good tools offered by Visual Studio and .NET Framework make it way easier for us. In this posting we started with feed aggregator that imports feed items on serial mode. With two steps we parallelized feed importing and entries inserting gaining 2.3 times raise in performance. Although this number is specific to my test environment it shows clearly that parallel programming may raise the performance of your application significantly.

  Read the article

• Hadoop growing pains

  - by Piotr Rodak

  This post is not going to be about SQL Server. I have been reading recently more and more about “Big Data” – very catchy term that describes untamed increase of the data that mankind is producing each day and the struggle to capture the meaning of these data. Ten years ago, and perhaps even three years ago this need was not so recognized. Increasing number of smartphones and discernable trend of mainstream Internet traffic moving to the smartphone generated one means that there is bigger and bigger stream of information that has to be stored, transformed, analysed and perhaps monetized. The nature of this traffic makes if very difficult to wrap it into boundaries of relational database engines. The amount of data makes it near to impossible to process them in relational databases within reasonable time. This is where ‘cloud’ technologies come to play. I just read a good article about the growing pains of Hadoop, which became one of the leading players on distributed processing arena within last year or two. Toby Baer concludes in it that lack of enterprise ready toolsets hinders Hadoop’s apprehension in the enterprise world. While this is true, something else drew my attention. According to the article there are already about half of a dozen of commercially supported distributions of Hadoop. For me, who has not been involved into intricacies of open-source world, this is quite interesting observation. On one hand, it is good that there is competition as it is beneficial in the end to the customer. On the other hand, the customer is faced with difficulty of choosing the right distribution. In future, when Hadoop distributions fork even more, this choice will be even harder. The distributions will have overlapping sets of features, yet will be quite incompatible with each other. I suppose it will take a few years until leaders emerge and the market will begin to resemble what we see in Linux world. There are myriads of distributions, but only few are acknowledged by the industry as enterprise standard. Others are honed by bearded individuals with too much time to spend. In any way, the third fact I can’t help but notice about the proliferation of distributions of Hadoop is that IT professionals will have jobs.   BuzzNet Tags: Hadoop,Big Data,Enterprise IT

  Read the article

• JavaScript Sucks.

  - by Matt Watson

  JavaScript Sucks. Yes, I said it. Microsoft's announcement of TypeScript got me thinking today. Is this a step in the right direction? It sounds like it fixes a lot of problems with JavaScript development. But is it really just duct tape and super glue for a programming model that needs to be replaced?I have had a love hate relationship with JavaScript, like most developers who would prefer avoiding client side code. I started doing web development over 10 years ago and I have done some pretty cool stuff with JavaScript. It has came a long ways and is the universal standard these days for client side scripting in the web browser. Over the years the browsers have become much faster at processing JavaScript. Now people are even trying to use it on the server side via node.js. OK, so why do I think JavaScript sucks?Well first off, as an enterprise web application developer, I don't like any scripting or dynamic languages. I like code that compiles for lots of obvious reasons. It is messy to code with and lacks all kinds of modern programming features. We spend a lot of time trying to hack it to do things it was never really designed for.Ever try to use different jQuery based plugins that require conflicting jQuery versions? Yeah, that sucks.How about trying to figure out how to make 20 javascript include files load quicker as one request? Yeah that sucks too.Performance? Let me just point to the old Facebook mobile app made with JS & HTML5. It sucked. Enough said.How about unit testing JavaScript? I've never tried it, but it sure sounds like fun.My biggest problem with JavaScript is code security. If I make some awesome product, there is no way to protect my code. How can we expect game makers to write apps in 100% JavaScript and HTML5 if they can't protect their intellectual property?There are compiling tools like Closure, unit test frameworks, minify, coffee script, TypeScript and a bunch of other tools. But to me, they all try to make up for the weaknesses and problems with JavaScript. JavaScript is a mess and we spend a lot of time trying to work around all of it's problems. It is possible to program in Silverlight, Java or Flash and run that in the browser instead of JavaScript, but they all have their own problems and lack universal mobile support. I believe Microsoft's new TypeScript is a step forward for JavaScript, but I think we need to start planning to go a whole different direction. We need a new universal client side programming model, because JavaScript sucks.

  Read the article

• Customer Support Spotlight: Clemson University

  - by cwarticki

  I've begun a Customer Support Spotlight series that highlights our wonderful customers and Oracle loyalists.  A week ago I visited Clemson University.  As I travel to visit and educate our customers, I provide many useful tips/tricks and support best practices (as found on my blog and twitter). Most of all, I always discover an Oracle gem who deserves recognition for their hard work and advocacy. Meet George Manley.  George is a Storage Engineer who has worked in Clemson's Data Center all through college, partially in the Hardware Architecture group and partially in the Storage group. George and the rest of the Storage Team work with most all of the storage technologies that they have here at Clemson. This includes a wide array of different vendors' disk arrays, with the most of them being Oracle/Sun 2540's.  He also works with SAM/QFS, ACSLS, and our SL8500 Tape Libraries (all three Oracle/Sun products). (pictured L to R, Matt Schoger (Oracle), Mark Flores (Oracle) and George Manley) George was kind enough to take us for a data center tour.  It was amazing.  I rarely get to see the inside of data centers, and this one was massive. Clemson Computing and Information Technology’s physical resources include the main data center located in the Information Technology Center at the Innovation Campus and Technology Park. The core of Clemson’s computing infrastructure, the data center has 21,000 sq ft of raised floor and is powered by a 14MW substation. The ITC power capacity is 4.5MW.  The data center is the home of both enterprise and HPC systems, and is staffed by CCIT staff on a 24 hour basis from a state of the art network operations center within the ITC. A smaller business continuance data center is located on the main campus.  The data center serves a wide variety of purposes including HPC (supercomputing) resources which are shared with other Universities throughout the state, the state's medicaid processing system, and nearly all other needs for Clemson University. Yes, that's no typo (14,256 cores and 37TB of memory!!! Thanks for the tour George and thank you very much for your time.  The tour was fantastic. I enjoyed getting to know your team and I look forward to many successes from Clemson using Oracle products. -Chris WartickiGlobal Customer Management

  Read the article

• At the Java DEMOgrounds - Oracle’s Java Embedded Suite 7.0

  - by Janice J. Heiss

  The Java Embedded Suite 7.0, a new, packaged offering that facilitates the creation of  applications across a wide range of  embedded systems including network appliances, healthcare devices, home gateways, and routers was demonstrated by Oleg Kostukovsky of  Oracle’s Java Embedded Global Business Unit. He presented a device-to-cloud application that relied upon a scan station connected to Java Demos throughout JavaOne. This application allows an NFC tag distributed on a handout given to attendees to be scanned to gather various kinds of data. “A raffle allows attendees to check in at six unique demos and qualify for a prize,” explained Kostukovsky. “At the same time, we are collecting data both from NFC tags and sensors. We have a sensor attached to the back of the skin page that collects temperature, humidity, light intensity, and motion data at each pod. So, all of this data is collected using an application running on a small device behind the scan station."“Analytics are performed on the network using Java Embedded Suite and technology from Oracle partners, SeeControl, Hitachi, and Globalscale,” Kostukovsky said. Next, he showed me a data visualization web site showing sensory, environmental, and scan data that is collected on the device and pushed into the cloud. The Oracle product that enabled all of this, Java Embedded Suite 7.0, was announced in late September. “You can see all kinds of data coming from the stations in real-time -- temperature, power consumption, light intensity and humidity,” explained Kostukovsky. “We can identify trends and look at sensory data and see all the trends of all the components. It uses a Java application written by a partner, SeeControl. So we are using a Java app server and web server and a database.” The Market for Java Embedded Suite 7.0 “It's mainly geared to mission-to-mission applications because the overall architecture applies across multiple industries – telematics, transportation, industrial automation, smart metering, etc. This architecture is one in which the network connects to sensory devices and then pre-analyzes the data from these devices, after which it pushes the data to the cloud for processing and visualization. So we are targeting all those industries with those combined solutions. There is a strong interest from Telcos, from carriers, who are now moving more and more to the space of providing full services for their interim applications. They are looking to deploy solutions that will provide a full service to those who are building M-to-M applications.”

  Read the article

• MySQL Connect Only 10 Days Away - Focus on InnoDB Sessions

  - by Bertrand Matthelié

  Time flies and MySQL Connect is only 10 days away! You can check out the full program here as well as in the September edition of the MySQL newsletter. Mat recently blogged about the MySQL Cluster sessions you’ll have the opportunity to attend, and below are those focused on InnoDB. Remember you can plan your schedule with Schedule Builder. Saturday, 1.00 pm, Room Golden Gate 3: 10 Things You Should Know About InnoDB—Calvin Sun, Oracle InnoDB is the default storage engine for Oracle’s MySQL as of MySQL Release 5.5. It provides the standard ACID-compliant transactions, row-level locking, multiversion concurrency control, and referential integrity. InnoDB also implements several innovative technologies to improve its performance and reliability. This presentation gives a brief history of InnoDB; its main features; and some recent enhancements for better performance, scalability, and availability. Saturday, 5.30 pm, Room Golden Gate 4: Demystified MySQL/InnoDB Performance Tuning—Dimitri Kravtchuk, Oracle This session covers performance tuning with MySQL and the InnoDB storage engine for MySQL and explains the main improvements made in MySQL Release 5.5 and Release 5.6. Which setting for which workload? Which value will be better for my system? How can I avoid potential bottlenecks from the beginning? Do I need a purge thread? Is it true that InnoDB doesn't need thread concurrency anymore? These and many other questions are asked by DBAs and developers. Things are changing quickly and constantly, and there is no “silver bullet.” But understanding the configuration setting’s impact is already a huge step in performance improvement. Bring your ideas and problems to share them with others—the discussion is open, just moderated by a speaker. Sunday, 10.15 am, Room Golden Gate 4: Better Availability with InnoDB Online Operations—Calvin Sun, Oracle Many top Web properties rely on Oracle’s MySQL as a critical piece of infrastructure for serving millions of users. Database availability has become increasingly important. One way to enhance availability is to give users full access to the database during data definition language (DDL) operations. The online DDL operations in recent MySQL releases offer users the flexibility to perform schema changes while having full access to the database—that is, with minimal delay of operations on a table and without rebuilding the entire table. These enhancements provide better responsiveness and availability in busy production environments. This session covers these improvements in the InnoDB storage engine for MySQL for online DDL operations such as add index, drop foreign key, and rename column. Sunday, 11.45 am, Room Golden Gate 7: Developing High-Throughput Services with NoSQL APIs to InnoDB and MySQL Cluster—Andrew Morgan and John Duncan, Oracle Ever-increasing performance demands of Web-based services have generated significant interest in providing NoSQL access methods to MySQL (MySQL Cluster and the InnoDB storage engine of MySQL), enabling users to maintain all the advantages of their existing relational databases while providing blazing-fast performance for simple queries. Get the best of both worlds: persistence; consistency; rich SQL queries; high availability; scalability; and simple, flexible APIs and schemas for agile development. This session describes the memcached connectors and examines some use cases for how MySQL and memcached fit together in application architectures. It does the same for the newest MySQL Cluster native connector, an easy-to-use, fully asynchronous connector for Node.js. Sunday, 1.15 pm, Room Golden Gate 4: InnoDB Performance Tuning—Inaam Rana, Oracle The InnoDB storage engine has always been highly efficient and includes many unique architectural elements to ensure high performance and scalability. In MySQL 5.5 and MySQL 5.6, InnoDB includes many new features that take better advantage of recent advances in operating systems and hardware platforms than previous releases did. This session describes unique InnoDB architectural elements for performance, new features, and how to tune InnoDB to achieve better performance. Sunday, 4.15 pm, Room Golden Gate 3: InnoDB Compression for OLTP—Nizameddin Ordulu, Facebook and Inaam Rana, Oracle Data compression is an important capability of the InnoDB storage engine for Oracle’s MySQL. Compressed tables reduce the size of the database on disk, resulting in fewer reads and writes and better throughput by reducing the I/O workload. Facebook pushes the limit of InnoDB compression and has made several enhancements to InnoDB, making this technology ready for online transaction processing (OLTP). In this session, you will learn the fundamentals of InnoDB compression. You will also learn the enhancements the Facebook team has made to improve InnoDB compression, such as reducing compression failures, not logging compressed page images, and allowing changes of compression level. Not registered yet? You can still save US$ 300 over the on-site fee – Register Now!

  Read the article

• USB drives not recognized all of a sudden (module usb_storage not loading)

  - by Siddharth

  I am very close to the solution, just need to know how to get usb-storage to load I have tried most of the advice on askubuntu and other sites, usb_storage enable to fdisk -l. But I am unable to find steps to get it working again. sudo lsusb results Bus.... skipped 4 lines Bus 004 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 001 Device 005: ID 8564:1000 sudo dmseg | tail reports [ 69.567948] usb 1-4: USB disconnect, device number 4 [ 74.084041] usb 1-6: new high-speed USB device number 5 using ehci_hcd [ 74.240484] Initializing USB Mass Storage driver... [ 74.256033] scsi5 : usb-storage 1-6:1.0 [ 74.256145] usbcore: registered new interface driver usb-storage [ 74.256147] USB Mass Storage support registered. [ 74.257290] usbcore: deregistering interface driver usb-storage fdisk -l reports Device Boot Start End Blocks Id System /dev/sda1 * 2048 972656639 486327296 83 Linux /dev/sda2 972658686 976771071 2056193 5 Extended /dev/sda5 972658688 976771071 2056192 82 Linux swap / Solaris I think I need steps to install and get usb_storage module working. Edit : I tried sudo modprobe -v usb-storage reports sudo modprobe -v usb-storage insmod /lib/modules/3.2.0-48-generic-pae/kernel/drivers/usb/storage/usb-storage.ko Edit : jsiddharth@siddharth-desktop:~$ sudo udevadm monitor --udev monitor will print the received events for: UDEV - the event which udev sends out after rule processing UDEV [4757.144372] add /module/usb_storage (module) UDEV [4757.146558] remove /module/usb_storage (module) UDEV [4757.148707] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6 (usb) UDEV [4757.149699] add /bus/usb/drivers/usb-storage (drivers) UDEV [4757.151214] remove /bus/usb/drivers/usb-storage (drivers) UDEV [4757.156873] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0 (usb) UDEV [4757.160903] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) UDEV [4757.164672] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165163] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165440] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) Narrowing down more : Seems like I need usb_storage to load as a module jsiddharth@siddharth-desktop:~$ lsmod | grep usb usbserial 37201 0 usbhid 41937 0 hid 77428 1 usbhid Still no usb driver mounted. Nor does a device show up in /dev. Any step by step process to debug and fix this will be really helpful.

  Read the article

• Timeout Considerations for Solicit Response – Part 2

  - by Michael Stephenson

  To follow up a previous article about timeouts and how they can affect your application I have extended the sample we were using to include WCF. I will execute some test scenarios and discuss the results. The sample We begin by consuming exactly the same web service which is sitting on a remote server. This time I have created a .net 3.5 application which will consume the web service using the basichttp binding. To show you the configuration for the consumption of this web service please refer to the below diagram. You can see like before we also have the connectionManagement element in the configuration file. I have added a WCF service reference (also using the asynchronous proxy methods) and have the below code sample in the application which will asynchronously make the web service calls and handle the responses on a call back method invoked by a delegate. If you have read the previous article you will notice that the code is almost the same.   Sample 1 – WCF with Default Timeouts In this test I set about recreating the same scenario as previous where we would run the test but this time using WCF as the messaging component. For the first test I would use the default configuration settings which WCF had setup when we added a reference to the web service. The timeout values for this test are: closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"   The Test We simulated 21 calls to the web service Test Results The client-side trace is as follows:   The server-side trace is as follows: Some observations on the results are as follows: The timeouts happened quicker than in the previous tests because some calls were timing out before they attempted to connect to the server The first few calls that timed out did actually connect to the server and did execute successfully on the server   Test 2 – Increase Open Connection Timeout & Send Timeout In this test I wanted to increase both the send and open timeout values to try and give everything a chance to go through. The timeout values for this test are: closeTimeout="00:01:00" openTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:10:00"   The Test We simulated 21 calls to the web service   Test Results The client side trace for this test was   The server-side trace for this test was: Some observations on this test are: This test proved if the timeouts are high enough everything will just go through   Test 3 – Increase just the Send Timeout In this test we wanted to increase just the send timeout. The timeout values for this test are: closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:10:00"   The Test We simulated 21 calls to the web service   Test Results The below is the client side trace The below is the server side trace Some observations on this test are: In this test from both the client and server perspective everything ran through fine The open connection timeout did not seem to have any effect   Test 4 – Increase Just the Open Connection Timeout In this test I wanted to validate the change to the open connection setting by increasing just this on its own. The timeout values for this test are: closeTimeout="00:01:00" openTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"   The Test We simulated 21 calls to the web service Test Results The client side trace was The server side trace was Some observations on this test are: In this test you can see that the open connection which relates to opening the channel timeout increase was not the thing which stopped the calls timing out It's the send of data which is timing out On the server you can see that the successful few calls were fine but there were also a few calls which hit the server but timed out on the client You can see that not all calls hit the server which was one of the problems with the WSE and ASMX options   Test 5 – Smaller Increase in Send Timeout In this test I wanted to make a smaller increase to the send timeout than previous just to prove that it was the key setting which was controlling what was timing out. The timeout values for this test are: openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:02:30"   The Test We simulated 21 calls to the web service Test Results The client side trace was   The server side trace was Some observations on this test are: You can see that most of the calls got through fine On the client you can see that call 20 timed out but still hit the server and executed fine.   Summary At this point between the two articles we have quite a lot of scenarios showing the different way the timeout setting have played into our original performance issue, and now we can see how WCF could offer an improved way to handle the problem. To summarise the differences in the timeout properties for the three technology stacks: ASMX The timeout value only applies to the execution time of your request on the server. The timeout does not consider how long your code might be waiting client side to get a connection. WSE The timeout value includes both the time to obtain a connection and also the time to execute the request. A timeout will not be thrown as an error until an attempt to connect to the server is made. This means a 40 second timeout setting may not throw the error until 60 seconds when the connection to the server is made. If the connection to the server is made you should be aware that your message will be processed and you should design for this. WCF The WCF send timeout is the setting most equivalent to the settings we were looking at previously. Like WSE this setting the counter includes the time to get a connection as well as the time to execute on a server. Unlike WSE and ASMX an error will be thrown as soon as the send timeout from making your call from user code has elapsed regardless of whether we are waiting for a connection or have an open connection to the server. This may to a user appear to have better latency in getting an error response compared to WSE or ASMX.

  Read the article

• Oracle Coherence 3.5 PreSales Boot Camp - Live Virtual Training (12-13/Mai/10)

  - by Claudia Costa

  Oracle Coherence is an in-memory data grid solution that enables organizations to predictably scale mission-critical applications by providing fast access to frequently used data. By automatically and dynamically partitioning data, Oracle Coherence ensures continuous data availability and transactional integrity, even in the event of a server failure. It provides organizations with a robust scale-out data abstraction layer that brokers the supply and demand of data between applications and data sources. Register today!   What will we cover The Oracle Coherence 3.5 Boot Camp is a FREE workshop which provides a quick hands-on technical ramp up on Oracle Coherence Data Grid.The Boot Camp provides a product overview, positioning and demo, discussion of customer uses and hands on lab work. Participants will leave the Oracle Coherence Boot Camp with a solid understanding of the product and where and how to apply it.It will provide an overview of the product as well as hands-on lab work.   • Architecting applications for scalability, availability, and performance • Introduction to Data Grids and Extreme Transaction Processing (XTP) • Coherence Case Studies • Oracle Coherence Product Demonstration • Coherence implementation strategies and architectural approaches • Coherence product features and APIs • Hands-on labs that will include product installation, configuration, sample applications, code examples, and more.   Who should attend This boot camp is intended for prospective users and implementers of Oracle Coherence Data Grid or implementers that have had limited exposure to Coherence and seek to gain a Technical Overview of the product with hand on exercises. Ideal participants are Oracle partners (SIs and resellers) with backgrounds in business information systems and a clientele of customers with ongoing or prospective application and/or data grid initiatives. Alternatively, partners with the background described above and an interest in evolving their practice to a similar profile are suitable participants.   Prerequisites and Workstation requirements There are no prerequisite classes for this Boot Camp. However, labs rely upon usage of the Java programming language. Therefore participants should be familiar with the Java language or similar Object Oriented programming languages. Additionally, students experience with enterprise data storage and manipulation is and knowledge of relevant concepts will benefit most from the boot camp. In order to attend this boot camp you need to have the necessary software installed on your laptop prior to attending the class. Please revise the Workstation Requirements page and register today! Agenda - May 12 - 8:30 May 13 - 12:30 *To view the full agenda and to register click here.    

  Read the article

• Installing Canon LBP6000 in Ubuntu 12.04

  - by MMA

  This is really frustrating. I am trying to install LBP6000 in Ubuntu 12.04 without any success. (Well, I had success about a week back when I first bought the printer and finally printed pages after a struggle of several hours. Then today it suddenly stopped working and I uninstalled everything and started from scratch. Now, I seem to have lost the way.) My steps Downloaded the latest Canon driver from Canon site. File Linux_CAPT_PrinterDriver_V240_uk_EN.tar.gz Got the radu script (I am allowed only two hyperlinks, so can not put the link here. You can Google radu Canon) Changed the /etc/modprobe.d/blacklist-cups-usblp.conf file as instructed in, Official Documentation. (See the section Ubuntu 12.04 Install). Now this file looks like, # cups talks to the raw USB devices, so we need to blacklist usblp to avoid # grabbing them # blacklist usblp Rebooted my machine Changed the port in radu script to 59787 as instructed in the link at step 3. (Again see the section Ubuntu 12.04 Install, or see the comment at How to Install Canon LBP Printers in Ubuntu. Also put the latest deb files from step 1 in the appropriate directory of this script. Ran the radu script. A printer, LBP6000 got added. Not two printers, one to be disabled, as appeared in the message on the terminal after running the script. sudo /etc/init.d/ccpd status shows, Canon Printer Daemon for CUPS: ccpd: 3142 3139 Results The printer does not print. Printer state (from System Setting-Printing, or at cups http interface localhost:631/printers/LBP6000) goes from Idle to Processing, a job appears in print queue, and then the job disappears and the printer state goes back to Idle. The actual printer does not even blink. Diagnostics (got help from the link in step 3, Troubleshooting) captstatusui -P LBP6000 shows communication error lsmod | grep usblp did not show anything. After running, sudo modprobe usblp, shows usblp 17885 0 However, ls -l /dev/usb/lp0 gives, ls: cannot access /dev/usb/lp0: No such file or directory /var/ccpd did not exist, created, sudo mkdir /var/ccpd sudo mkfifo /var/ccpd/fifo0 sudo chown -R lp:lp /var/ccpd Any suggestion will be appreciated. Do not know what to do.

  Read the article

• Now Shipping! NetAdvantage for .NET 2010 Volume 3!

  The new NetAdvantage Ultimate includes all four Line of Business user interface control sets for ASP .NET, Windows Forms, WPF and Silverlight plus two advanced Data Visualization UI control sets for WPF and Silverlight. With six NetAdvantage products in one robust package, Infragistics® gives you hundreds of controls and infinite development possibilities. Unified XAML Product Strategy-Share Code, Get More Controls In the 10.3 release, Infragistics continues to deliver code parity between the XAML platforms, WPF and Silverlight. In the line of business toolsets, Infragistics introduces the new xamSchedule™, full-featured, Outlook® 2010-style schedule controls, and the new xamDataTree™, a data bound tree view that comfortably handles tens of thousands of tree nodes. Mimicking our Silverlight Drag and Drop Framework, the WPF Drag and Drop Framework CTP empowers you to add your own rich touches to your applications. Track Users' Behaviors New to all NetAdvantage Silverlight controls is the Infragistics Analytics Framework (IGAF), which empowers you to track user behavior in RIAs running on Silverlight 4. Building on the Microsoft® Silverlight Analytics Framework, with IGAF you can analyze the user's behaviors to ensure the experience you want to deliver. NetAdvantage for Windows Forms--New Office® 2010 Ribbon and Application Menu 2010 Create new experiences with Windows Forms. Now with Office 2010 styling, NetAdvantage for Windows Forms has new features such as Microsoft® Office 2010 ribbon and enhanced Infragistics.Excel to export the contents of the high performance WinGrid™ into Microsoft Excel® 2010. The new Windows Message Support enables Infragistics standalone editor controls to process numerous Windows® OS messages, allowing them to respond just like native controls to changes in the Windows environment. Create Faster Web 2.0 Experiences with NetAdvantage for ASP .NET Infragistics continues to push the envelope to deliver the fastest ASP .NET WebForms controls available on the market. Our lightning fast ASP .NET grids are now enhanced with XPS/PDF Exporting and Summary Rows. This release also includes support for jQuery Templating (as a CTP) within our WebDataGrid™ and WebDataTree™ controls allowing you to quickly cut down overall page size. Deliver Business Intelligence with Power, Flexibility and the Office 2010 Experience NetAdvantage for WPF Data Visualization and NetAdvantage for Silverlight Data Visualization help you deliver flexible, powerful and usable end user experiences in Business Intelligence applications. Both suites include the Pivot Grid that delivers the full power of online analytical processing (OLAP) to present multi-dimensional data, sliced and diced in cross-tabulated form for end users to drill down into, interact with and easily extract meaning from the data. Mapping Made Easy 10.3 marks the official release of the WPF Data Visualization xamMap™ control to map anything and everything from geographic to geo-spacial mapping data. Map layers allow you to add successive levels of detail, navigational panes for panning in all directions, color swatch panes that facilitate value scales like Choropleth shading, and scale panes allowing users to zoom-in and out. Both toolsets introduce the first of many relationship maps! With the xamOrgChart™ CTP you can map out organizational charts of up to 50K employees, competitive brackets (think World Cup) and any other relational, organizational map your application needs. http://www.infragistics.com span.fullpost {display:none;}

  Read the article

• Oracle Open World starts on Sunday, Sept 30

  - by Mike Dietrich

  Oracle Open World 2012 starts on Sunday this week - and we are really looking forward to see you in one of our presentations, especially theDatabase Upgrade on SteriodsReal Speed, Real Customers, Real Secretson Monday, Oct 1, 12:15pm in Moscone South 307(just skip the lunch - the boxed food is not healthy at all): Monday, Oct 1, 12:15 PM - 1:15 PM - Moscone South - 307 Database Upgrade on Steroids:Real Speed, Real Customers, Real Secrets Mike Dietrich - Consulting Member Technical Staff, Oracle Georg Winkens - Technical Manager, Amadeus Data Processing Carol Tagliaferri - Senior Development Manager, Oracle  Looking to improve the performance of your database upgrade and learn about other ways to reduce upgrade time? Isn’t everyone? In this session, you will learn directly from Oracle’s Upgrade Development team about what you can do to speed things up. Find out about ways to reduce upgrade downtime such as using a transient logical standby database and/or Oracle GoldenGate, and get other hints and tips. Learn about new features that improve upgrade performance and reduce downtime. Hear Georg Winkens, DB Services technical manager from Amadeus, speak about his upgrade experience, and get real-life performance measurements and advice for a successful upgrade. . And don't forget: we already start on Sunday so if you'd like to learn about the SAP database upgrades at Deutsche Messe: Sunday, Sep 30, 11:15 AM - 12:00 PM - Moscone West - 2001Oracle Database Upgrade to 11g Release 2 with SAP Applications Andreas Ellerhoff - DBA, Deutsche Messe AG Mike Dietrich - Consulting Member Technical Staff, Oracle Jan Klokkers - Sr.Director SAP Development, Oracle Deutsche Messe began to use Oracle6 Database at the end of the 1980s and has been using Oracle Database technology together with SAP applications successfully since 2002. At the end of 2010, it took the first steps of an upgrade to Oracle Database 11g Release 2 (11.2), and since mid-2011, all SAP production systems there run successfully with Oracle Database 11g. This presentation explains why Deutsche Messe uses Oracle Database together with SAP applications, discusses the many reasons for the upgrade to Release 11g, and focuses on the operational top aspects from a DBA perspective. . And unfortunately the Hands-On-Lab is sold out already ... We would like to apologize but we have absolutely ZERO influence on either the number of runs or the number of available seats.  Tuesday, Oct 2, 10:15 AM - 12:45 PM - Marriott Marquis - Salon 12/13 Hands On Lab:Upgrading an Oracle Database Instance, Using Best Practices Roy Swonger - Senior Director, Software Development, Oracle Carol Tagliaferri - Senior Development Manager, Oracle Mike Dietrich - Consulting Member Technical Staff, Oracle Cindy Lim - PMTS, Oracle Carol Palmer - Principal Product Manager, Oracle This hands-on lab gives participants the opportunity to work through a database upgrade from an older release of Oracle Database to the very latest Oracle Database release available. Participants will learn how the improved automation of the upgrade process and the generation of fix-up scripts can quickly help fix database issues prior to upgrading. The lab also uses the new parallel upgrade feature to improve performance of the upgrade, resulting in less downtime. Come get inside information about database upgrades from the Database Upgrade development team. . See you soon

  Read the article

• IDC Analyst Report Touts Oracle–Accenture Strategic Initiative

  - by kristin.jellison

  Hi there, partners! Oracle Engineered Systems have been getting some love lately, and we want to share it with you! The market intelligence and advisory firm IDC recently released a report lauding Oracle and Accenture’s strategic initiative to route the performance and flexibility of Oracle Engineered Systems to clients. The report, "Oracle and Accenture Strategic Alliance Places Big Bet on Engineered Systems,” by Steve White, reflects a largely positive analysis of the relationship. White notes that the alliance is “one of the largest in the industry.” Under the relationship, Accenture has incorporated Oracle Engineered Systems—including Oracle Exadata Database Machine, Oracle Exalogic Elastic Cloud, Oracle SuperCluster, and Oracle Exalytics In-Memory Machine—into its leading datacenter transformation consulting services. Together, the two companies have also created bespoke platforms, such as the Accenture Foundation Platform for Oracle, which helps clients accelerate deployments on Oracle Fusion Middleware, running Oracle Exalogic Elastic Cloud and Oracle Exadata Database Machine. Oracle Engineered Systems deliver a single, engineered platform—including server to storage and networking. This makes it easier and cheaper for Accenture clients around the world to prepare their datacenters for managing, processing and analyzing the massive amounts of data they (rightly) anticipate seeing in the next decade. The new solutions can help reduce the effort and cost to migrate any vendor database to an Oracle Engineered Systems platform, which can lower the cost of ownership by up to 50 percent. For its part, Accenture has built a team of 300 consultants to implement and increase the flexibility and stability of client datacenters. This move further expands one of the fastest-growing full-service Oracle Enterprise solutions. Over 52,000 Accenture consultants are qualified to implement, upgrade and outsource the Oracle product suite. Accenture is a Diamond-level member of Oracle PartnerNetwork (OPN). For Oracle Partners, this update should give you at least two things to walk away with. First, this initiative is showing signs of success. As Marty Cole, group chief executive for Accenture’s Technology growth platform, put it, “We are seeing an increasing number of clients recognizing the value of consolidating their databases and taking advantage of the cost and performance benefits delivered by these solutions.” The pipeline is there—and not just for Accenture. Use this example to show your clients that investments in Oracle Engineered Systems are on the rise. Second, recognize that Oracle Engineered Systems represent one of the biggest platforms for growth that Oracle has to offer partners. As part of the agreement, Accenture is able to provide: Platform Readiness Assessments Platform Implementation App Rationalization Database Rationalization Managed Services These are all enablement opportunities you can offer customers under Oracle’s partner programs —to continue building the value of their investments, and the value of your relationship with Oracle. Take a read through the IDC report. To learn more about the partnership, see this press release. Happy selling! The OPN Communications Team

  Read the article

• Workaround: XNA 4 importing only part of 3d model from FBX

  - by Vitus

  Recently I found a problem with importing 3D models from FBX files: it sometimes imported partly. That is when you draw a 3D model, loaded from FBX file, processed by content pipeline, you got only part of meshes. “Sometimes” means that you got this error only for some files. Results of my research below. For example, I have 10Mb binary FBX file with a model, looks like: And when I load it, result Model instance contains only part of meshes and looks like: Because models from other files imported normally, I think that it’s a “bad format” file. When you add FBX file to your XNA Content project and build it, imported file processing by XNA Fbx Importer & Processor. On MSDN I found that FbxImporter designed to work with 2006.11 version of FBX format. My file is FBX 2012 format. Ok, I need to convert it to 2006 format. It can be done by using Autodesk FBX Converter 2012.1. I tried to convert it to other versions of FBX formats, but without success. And I also tried to import my FBX file to 3D MAX, and it imported correctly. Then I export model using 3D MAX, and it generate me other FBX, which I add to my XNA project. After that I got full model, that rendered well! So, internal data structure of FBX file is more important for right XNA import, than it version! Unfortunately, Autodesk FBX is not an open file format. If you want to work with FBX, you should use Autodesk FBX SDK. This way you can manually read content of FBX file, and use it everyway. Then I tried to convert my source FBX file to DAE Collada, and result DAE file back to FBX, using FBX Converter (FBX –> DAE –> FBX). The result FBX file can be imported normally.   Conclusion: XNA FbxImporter correct work doesn't depend on version (2006, 2011, etc) and form (binary, ascii) of FBX file. Internal FBX data structure much more important. To make FBX "readable" for XNA Importer you can use double conversion like FBX -> Collada -> FBX You also can use FBX SDK to manually load data from FBX P.S. Autodesk FBX Converter 2012 is more, than simple converter. It provide you tools like: FBX Explorer, which show you structure of FBX file; FBX Viewer, which render content of FBX and provide basic intercation like model move and zoom; FBX Take Manager, which allow to work with embedded animations

  Read the article

• USB drives not recognized all of a sudden (usb_storage not loaded lsmod does not report usb_storage)

  - by Siddharth

  I have tried most of the advice on askubuntu and other sites, usb_storage enable to fdisk -l. But I am unable to find steps to get it working again. sudo lsusb results Bus.... skipped 4 lines Bus 004 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 001 Device 005: ID 8564:1000 sudo dmseg | tail reports [ 69.567948] usb 1-4: USB disconnect, device number 4 [ 74.084041] usb 1-6: new high-speed USB device number 5 using ehci_hcd [ 74.240484] Initializing USB Mass Storage driver... [ 74.256033] scsi5 : usb-storage 1-6:1.0 [ 74.256145] usbcore: registered new interface driver usb-storage [ 74.256147] USB Mass Storage support registered. [ 74.257290] usbcore: deregistering interface driver usb-storage fdisk -l reports Device Boot Start End Blocks Id System /dev/sda1 * 2048 972656639 486327296 83 Linux /dev/sda2 972658686 976771071 2056193 5 Extended /dev/sda5 972658688 976771071 2056192 82 Linux swap / Solaris I think I need steps to install and get usb_storage module working. Edit : I tried sudo modprobe -v usb-storage reports sudo modprobe -v usb-storage insmod /lib/modules/3.2.0-48-generic-pae/kernel/drivers/usb/storage/usb-storage.ko Edit : jsiddharth@siddharth-desktop:~$ sudo udevadm monitor --udev monitor will print the received events for: UDEV - the event which udev sends out after rule processing UDEV [4757.144372] add /module/usb_storage (module) UDEV [4757.146558] remove /module/usb_storage (module) UDEV [4757.148707] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6 (usb) UDEV [4757.149699] add /bus/usb/drivers/usb-storage (drivers) UDEV [4757.151214] remove /bus/usb/drivers/usb-storage (drivers) UDEV [4757.156873] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0 (usb) UDEV [4757.160903] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) UDEV [4757.164672] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165163] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165440] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) Narrowing down more : Seems like I need usb_storage to load as a module jsiddharth@siddharth-desktop:~$ lsmod | grep usb usbserial 37201 0 usbhid 41937 0 hid 77428 1 usbhid Still no usb driver mounted. Nor does a device show up in /dev. Any step by step process to debug and fix this will be really helpful.

  Read the article

• The illusion of Competence

  - by tony_lombardo

  Working as a contractor opened my eyes to the developer food chain.  Even though I had similar experiences earlier in my career, the challenges seemed much more vivid this time through.  I thought I’d share a couple of experiences with you, and the lessons that can be taken from them. Lesson 1: Beware of the “funnel” guy.  The funnel guy is the one who wants you to funnel all thoughts, ideas and code changes through him.  He may say it’s because he wants to avoid conflicts in source control, but the real reason is likely that he wants to hide your contributions.  Here’s an example.  When I finally got access to the code on one of my projects, I was told by the developer that I had to funnel all of my changes through him.  There were 4 of us coding on the project, but only 2 of us working on the UI.  The other 2 were working on a separate application, but part of the overall project.  So I figured, I’ll check it into SVN, he reviews and accepts then merges in.  Not even close.  I didn’t even have checkin rights to SVN, I had to email my changes to the developer so he could check those changes in.  Lesson 2: If you point out flaws in code to someone supposedly ‘higher’ than you in the developer chain, they’re going to get defensive.  My first task on this project was to review the code, familiarize myself with it.  So of course, that’s what I did.  And in familiarizing myself with it, I saw so many bad practices and code smells that I immediately started coming up with solutions to fix it.  Of course, when I reviewed these changes with the developer (guy who originally wrote the code), he smiled and nodded and said, we can’t make those changes now, it’s too destabilizing.  I recommended we create a new branch and start working on refactoring, but branching was a new concept for this guy and he was worried we would somehow break SVN. How about some concrete examples? I started out by recommending we remove NUnit dependency and tests from the application project, and create a separate Unit testing project.  This was met with a little bit of resistance because - “How do I access the private methods?”  As it turned out there weren’t really any private methods that weren’t exposed by public methods, so I quickly calmed this fear. Win 1 Loss 0 Next, I recommended that all of the File IO access be wrapped in Using clauses, or at least properly wrapped in try catch finally.  This recommendation was accepted.. but never implemented. Win 2  Loss 1 Next recommendation was to refactor the command pattern implementation.  The command pattern was implemented, but it wasn’t really necessary for the application.  More over, the fact that we had 100 different command classes, each with it’s own specific command parameters class, made maintenance a huge hassle.  The same code repeated over and over and over.  This recommendation was declined, the code was too fragile and this change would destabilize it.  I couldn’t disagree, though it was the commands themselves in many cases that were fragile. Win 2 Loss 2 Next recommendation was to aid performance (and responsiveness) of the application by using asynchronous service calls.  This on was accepted. Win 2 Loss 3 If you’re paying any attention, you’re wondering why the async service calls was scored as a loss.. Let me explain.  The service call was made using the async pattern.  Followed by a thread.sleep  <facepalm>. Now it’s easy to be harsh on this kind of code, especially if you’re an experienced developer.  But I understood how most of this happened.  One junior guy, working as hard as he can to build his first real world application, with little or no guidance from anyone else.  He had his pattern book and theory of programming to help him, but no real world experience.  He didn’t know how difficult it would be to trace the crashes to the coding issues above, but he will one day.  The part that amazed me was the management position that “this guy should be a team lead, because he’s worked so hard”.  I’m all for rewarding hard work, but when you reward someone by promoting them past the point of their competence, you’re setting yourself and them up for failure.  And that’s lesson 3.  Just because you’ve got a hard worker, doesn’t mean he should be leading a development project.  If you’re a junior guy busting your ass, keep at it.  I encourage you to try new things, but most importantly to learn from your mistakes.  And correct your mistakes.  And if someone else looks at your code and shows you a laundry list of things that should be done differently, don’t take it personally – they’re really trying to help you.  And if you’re a senior guy, working with a junior guy, it’s your duty to point out the flaws in the code.  Even if it does make you the bad guy.  And while I’ve used “guy” above, I mean both men and women.  And in some cases mutant dinosaurs. 

  Read the article

< Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >