Search Results

Search found 15985 results on 640 pages for 'debug print'.

Page 211/640 | < Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >

  • In what circumstances are instance variables declared as '_var' in 'use fields' readonly?

    - by Pedro Silva
    I'm trying to understand the behavior of the fields pragma, which I find poorly documented, regarding fields prefixed with underscores. This is what the documentation has to say about it: Field names that start with an underscore character are made private to the class and are not visible to subclasses. Inherited fields can be overridden but will generate a warning if used together with the -w switch. This is not consistent with its actual behavior, according to my test, below. Not only are _-prefixed fields visible within a subclass, they are visible within foreign classes as well (unless I don't get what 'visible' means). Also, directly accessing the restricted hash works fine. Where can I find more about the behavior of the fields pragma, short of going at the source code? { package Foo; use strict; use warnings; use fields qw/a _b __c/; sub new { my ( $class ) = @_; my Foo $self = fields::new($class); $self->a = 1; $self->b = 2; $self->c = 3; return $self; } sub a : lvalue { shift->{a} } sub b : lvalue { shift->{_b} } sub c : lvalue { shift->{__c} } } { package Bar; use base 'Foo'; use strict; use warnings; use Data::Dumper; my $o = Bar->new; print Dumper $o; ##$VAR1 = bless({'_b' => 2, '__c' => 3, 'a' => 1}, 'Foo'); $o->a = 4; $o->b = 5; $o->c = 6; print Dumper $o; ##$VAR1 = bless({'_b' => 5, '__c' => 6, 'a' => 4}, 'Foo'); $o->{a} = 7; $o->{_b} = 8; $o->{__c} = 9; print Dumper $o; ##$VAR1 = bless({'_b' => 8, '__c' => 9, 'a' => 7}, 'Foo'); }

    Read the article

  • Visual Studio WCF Application now asking to manually attach to process

    - by JL
    I have a console app that is calling a WCF app hosted in IIS. Up until now everything has been fine and I am able to debug the app - step through it without any problems... Until I added my dev pc to a domain.... now every time I get step into the code hosted in IIS, a popup comes up asking if I would like to attach to this process... I can then continue debugging... again not a huge train smash - however... now it randomly just jumps to the end of the process (almost like some kind of timeout) and I am not able to reliably step and debug the IIS hosted code.... Any ideas? All the projects are in the same solution, and all running on the local dev pc... Using Visual Studio 2008, dev PC is Win 7

    Read the article

  • Sorting and aligning the contents of a text file in Python

    - by Emily Price
    In my program I have a text file that I read from and write to. However, I would like to display the contents of the text file in an aligned and sorted manner. The contents currently read: name, score name, score This is my code where the text file in read and printed: elif userCommand == 'V': print "High Scores:" scoresFile = open("scores1.txt", 'r') scores = scoresFile.read().split("\n") for score in scores: print score scoresFile.close() Would I have to convert this information into lists in order to be able to do this? If so, how do I go about doing this? Thank you

    Read the article

  • Perl CGI script to not wait for a subprocess to complete

    - by Tyug
    Is it possible to continue displaying a CGI script's HTML without waiting for a child process to complete, yet the child process should stay alive when the CGI script is complete. Here's what I have, -- Display HTML page # html page set up... so header/other stuff #the -c, -h are params are just params system("perl subprocess.pm -c params -h 1 &"); #actually print the html page setup ... For some weird reason, it waits for the subprocess to finish before it outputs the html page even though I included the asynchronous system call for linux. It doesn't render the page immediately. Is it possible to print the html page without waiting for the subprocess to finish?

    Read the article

  • Selenium selected option in dropdown not displayed correctly

    - by luckyfool
    I have the following issue with Selenium Webdriver. There are two dropdown menus on a page i am testing "brand" and "items". The options of "items" depend on which brand you choose. I am trying to iterate through all possible choices and print brand-item pairs. I use two possible ways to pick an option from each dropdown menu Using Select(): def retryingSelectOption(name,n): result=False attempts=0 while attempts<5: try: element=Select(driver.find_element_by_name(name)) element.select_by_index(n) print element.all_selected_options[0].text result=True break except StaleElementReferenceException: pass attempts+=1 return result And using .click(): def retryingClickOption(name,n): result=False attempts=0 while attempts<5: try: driver.find_element_by_name(name).find_elements_by_tag_name("option")[n].click() result=True break except StaleElementReferenceException: pass attempts+=1 return result My problem is that at ,what seem to me as random moments (sometimes it works sometimes it does not), even though the above functions return True and printing out the selected option shows me the correct answer, the browser still displays the previous option. So basically Selenium tells me i have picked the right option but the browser displays the previous one.No idea what is wrong.

    Read the article

  • Enable Disable JQuery Drag-able

    - by jafar201
    Hi all I am working on a print form that will enable Admin user Change the lay out of the print form so i select JQuery Dragable for the job and its working fine but their is one problem when Enable or Disable the first Element in HTML that is dragable take the Disable Style when Dragable is Disabled the other element keep there original look I am using IE 8 . I run the code on Fierfox and Chrome and the result was that all the Element change their style to disable style. I need the Elemnet to Keep there original Stayl <%@ Control Language="C#" AutoEventWireup="true" CodeBehind="PrintablePassportDesigner.ascx.cs" Inherits="CSPDPassportPrintingPOC.UserControls.PrintablePassportDesigner" % function EnableDragAndDrop(cBox) { $("#divDoB").draggable({ disabled: cBox.checked }); $("#divNationalNo").draggable({ disabled: cBox.checked }); $("#divSex").draggable({ disabled: cBox.checked }); $("#divPlaceOfBirth").draggable({ disabled: cBox.checked }); $("#divIssueDate").draggable({ disabled: cBox.checked }); $("#divMotherName").draggable({ disabled: cBox.checked }); $("#divExpDate").draggable({ disabled: cBox.checked }); $("#divAuthority").draggable({ disabled: cBox.checked }); $("#divPassportHolderName").draggable({ disabled: cBox.checked }); }

    Read the article

  • MonoDevelop seems to hang (not unresponsive) when building csprojs

    - by Michael Shimmins
    Building a solution from Visual Studio in mono develop seems to have some issues. I'm hoping someone else has experienced this and has some suggestions. The actual dcms process goes pretty quickly, but in between projects it hangs after printing: Building: XXX.YYY.ZZZ (Debug) After a few minutes (been 10 so far on this current run), it jumps to: Performing main compilation... /Library/Frameworks/Mono.framework/Versions/2.10.1/bin/dmcs /noconfig "/... Build complete -- 0 errors, 0 warnings Building: XXX.YYY.ZZZ (Debug) Then hangs again for another few minutes. This is a sln file with 29 csproj projects in it that was originally created in Visual Studio 2010. I'm wondering if there is a better way to set this up - potentially a native MD file format?

    Read the article

  • how to log digester with apache commons?

    - by Bruce
    Hi all I'm having trouble getting digester to log anything. I'd be hugely grateful for any light anyone can shed. In my code I'm doing this: Digester digester = new Digester(); .. some digester set up stuff // What on earth should go in here???? digester.setLogger(LogFactory.getLog("org.apache.commons.logging.Log")); I have a commons-logging.properties file in my classpath as follows: org.apache.commons.logging.Log=org.apache.commons.logging.impl.SimpleLog org.apache.commons.logging.simplelog.log.org.apache.commons.digester.Digester=debug org.apache.commons.logging.simplelog.log.org.apache.commons.digester.Digester.sax=info I just get no debug info at all.. Thanks for your help!

    Read the article

  • How do I splice a python string programmatically?

    - by Robin Welch
    Very simple question, hopefully. So, in Python you can split up strings using indices as follows: >>> a="abcdefg" >>> print a[2:4] cd but how do you do this if the indices are based on variables? E.g. >>> j=2 >>> h=4 >>> print a[j,h] Traceback (most recent call last): File "<stdin>", line 1, in ? TypeError: string indices must be integers

    Read the article

  • Convert a GTK python script to C

    - by Jessica
    The following script will take a screenshot on a Gnome desktop. import gtk.gdk w = gtk.gdk.get_default_root_window() sz = w.get_size() pb = gtk.gdk.Pixbuf(gtk.gdk.COLORSPACE_RGB,False, 8, sz[0], sz[1]) pb = pb.get_from_drawable(w, w.get_colormap(), 0, 0, 0, 0, sz[0], sz[1]) if (pb != None): pb.save("screenshot.png", "png") print "Screenshot saved to screenshot.png." else: print "Unable to get the screenshot." Now, I've been trying to convert this to C and use it in one of the apps I am writing but so far i've been unsuccessful. Is there any what to do this in C (on Linux)? Thanks! Jess.

    Read the article

  • Alter a single attribute with XSLT

    - by Pete Montgomery
    Hello! <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.web> <compilation debug="true" defaultLanguage="C#"> <!-- this is a comment --> </compilation> </system.web> </configuration> What's the simplest XSLT you can think of to transform the value of the first, in this case only, /configuration/system.web/compilation/@debug attribute from true to false?

    Read the article

  • In MAYA 2009, is it possible to capture the cube rotate event?

    - by Rahul2047
    I need to call a function ( Maya-Python ) based on cube rotationX. For that I have to capture the event, programmatically. I tried using while loop but It stucks in the loop, Nothing can be done in that time. I tried theading (python), still same. Can it be done this or other way? If yes, How? Maya 2009 in Windows XP Some failed code references: import maya.cmds as cmds while (count < 90): lock = cmds.getAttr('pCube1.rotateX',lock=False) print lock count = count + 1 Here Python wise: #!/usr/bin/python import thread import time # Define a function for the thread def cubeRotateX( threadName, delay): count = 0 while count < 5: time.sleep(delay) count += 1 try: thread.start_new_thread( cubeRotateX, ("Thread-1", 2, ) ) except: print "Error: unable to start thread" while 1: pass

    Read the article

  • PHP Global variable in class is reset

    - by Robert
    I have a web form that manipulates records in a MySQL database. I have a method for displaying an edit interface for both creating new records and editing them if ($_POST['new_page']) { print "<h2>Create new page</h2>\n"; $isNew=1; $this->EditForm(); } else if($_POST['edit']){ print "<h2>Edit page</h2>\n"; $isNew=0; $this->EditForm(); } I am trying to use the global variable $isNew to determine where a record is to be added or updated. However, whenever my SaveChanges() function is run, $isNew is always 0. $isNew is declared immediately after the class declaration, outside all of the functions. class Editor{ public $isNew;

    Read the article

  • Java exercise - display table with 2d array

    - by TheHacker66
    I'm struggling to finish a java exercise, it involves using 2d arrays to dinamically create and display a table based on a command line parameter. Example: java table 5 +-+-+-+-+-+ |1|2|3|4|5| +-+-+-+-+-+ |2|3|4|5|1| +-+-+-+-+-+ |3|4|5|1|2| +-+-+-+-+-+ |4|5|1|2|3| +-+-+-+-+-+ |5|1|2|3|4| +-+-+-+-+-+ What i have done so far: public static void main(String[] args) { int num = Integer.parseInt(args[0]); String[][] table = new String[num*2+1][num]; int[] numbers = new int[num]; int temp = 0; for(int i=0; i<numbers.length; i++) numbers[i] = i+1; // wrong for(int i=0; i<table.length; i++){ for(int j=0; j<num;j++){ if(i%2!=0){ temp=numbers[0]; for(int k=1; k<numbers.length; k++){ numbers[k-1]=numbers[k]; } numbers[numbers.length-1]=temp; for(int l=0; l<numbers.length; l++){ table[i][j] = "|"+numbers[l]; } } else table[i][j] = "+-"; } } for(int i=0; i<table.length; i++){ for(int j=0; j<num; j++) System.out.print(table[i][j]); if(i%2==0) System.out.print("+"); else System.out.print("|"); System.out.println();} } This doesn't work, since it prints 1|2|3|4 in every row, which isn't what i need. I found the issue, and it's because the first for loop changes the array order more times than needed and basically it returns as it was at the beginning. I know that probably there's a way to achieve this by writing more code, but i always tend to nest as much as possible to "optimize" the code while i write it, so that's why i tried solving this exercise by using less variables and loops as possible. Thanks in advance for your help!

    Read the article

  • How to prevent swallowing exceptions caused by unset expectations for a mocked object?

    - by Schultz9999
    I am looking for a way to modify catch block depending on if it's executed during the unit test run or not. The purpose is basically to detect/setup mock expectations which are swallowed because catch doesn't rethrow. I am using MSTest. One obvious thing is using preprocessor but I don't think it works. Especially if to use DEBUG define. There should be an easy way to detect that, shouldn't it? I must have been looking for something wrong because I couldn't find much info on that. try {...} catch(Exception) { Log(...); #if DEBUG throw; #endif }

    Read the article

  • How to mark a method as "ignore all handled exception" + "step through"? Even when user has selected

    - by Wolf5
    I want to mark a method as "debug step through" even if an exception is thrown (and catched within) the function. This is because 99% of the times I know this function will throw an exception (Assembly.GetTypes), and since this function is in a library I wish to hide this normal exception. (Why did MS not add an exceptionless GetTypes() call?) I have tried this but it still breaks the code when debugging: [DebuggerStepThrough] [DebuggerStepperBoundary] private Type[] GetTypesIgnoreMissing(Assembly ass) { Type[] typs; try { typs = ass.GetTypes(); } catch (ReflectionTypeLoadException ex) { typs = ex.Types; } var newlist = new List<Type>(); foreach (var type in typs) { if (type != null) newlist.Add(type); } return newlist.ToArray(); } Anyone know of a way to make this method 100% stepthrough even if ass.GetTypes() throw an exception in debug mode? It has to step through even when "Break on Thrown exceptions" is on. (I do not need to know I can explicitly choose to ignore that exact type of exception in the IDE)

    Read the article

  • Update query in sqlite3 problem

    - by user271753
    [sqlite executeQuery:@"UPDATE UserAccess SET Answer ='Positano';"]; NSArray *query2 = [sqlite executeQuery:@"SELECT Answer FROM UserAccess;"]; NSDictionary *dict = [query2 objectAtIndex:0]; NSString *itemValue = [dict objectForKey:@"Answer"]; NSLog(@"%@",itemValue); It does print Positano at this point .. But when I just print without the update query again . I get the old entry which is Paris. What am I doing wrong ??? I am using http://th30z.netsons.org/2008/11/objective-c-sqlite-wrapper/ wrapper. Regards , Novice

    Read the article

  • Program crash for array copy with ifort

    - by Stefano Borini
    This program crashes with Illegal instruction: 4 on MacOSX Lion and ifort (IFORT) 12.1.0 20111011 program foo real, pointer :: a(:,:), b(:,:) allocate(a(5400, 5400)) allocate(b(5400, 3600)) a=1.0 b(:, 1:3600) = a(:, 1:3600) print *, a print *, b deallocate(a) deallocate(b) end program The same program works with gfortran. I don't see any problem. Any ideas ? Unrolling the copy and performing the explicit loop over the columns works in both compilers. Note that with allocatable instead of pointer I have no problems. The behavior is the same if the statement is either inside a module or not. I confirm the same behavior on Linux using ifort (IFORT) 12.1.3 20120130.

    Read the article

  • search for a string , and add if it matches

    - by Sharat Chandra
    I have a file that has 2 columns as given below.... 101 6 102 23 103 45 109 36 101 42 108 21 102 24 109 67 and so on...... I want to write a script that adds the values from 2nd column if their corresponding first column matches for example add all 2nd column values if it's 1st column is 101 add all 2nd column values if it's 1st colummn is 102 add all 2nd column values if it's 1st colummn is 103 and so on ... i wrote my script like this , but i'm not getting the correct result awk '{print $1}' data.txt > col1.txt while read line do awk ' if [$1 == $line] sum+=$2; END {print "Sum for time stamp", $line"=", sum}; sum=0' data.txt done < col1.txt

    Read the article

  • VS 2008 unstable after "Stop Debugging"

    - by liys
    This was on Windows Server 2003 X86, VSTS 9.0.30729.1 SP I used "Attach to process" to debug the program, but recently when I "Stop Debugging" by "shift + f5", I was prompted with an error saying "VS has an internal error and will be unstable". After that all the debug related menu items were disabled e.g. "Start debugging" and "attach to process" etc., even when I forcibly closed the program the situation remained, leaving me the only option to restart the solution. The only reason I can think of causing this is that I forcibly kill the process a lot, in order to able to rebuild it quickly, other than that I didn't do anything abnormal to VS. another sympton: when I tried to close the VS normally, I was prompted with "source file [] does not belong to the project being debugged" for all the files I opened inside of IDE, but the file does belong to the project. Thanks for any reply.

    Read the article

  • c, pass awk syntax as argument to execl

    - by Skuja
    I want to run following command in c to read systems cpu and memory usage: ps aux|awk 'NR > 0 { cpu +=$3; ram+=$4 }; END {print cpu,ram}' I am trying to pass it to execl command and after that read its output: execl("/bin/ps", "/bin/ps", "aux|awk", "'NR > 0 { cpu +=$3; ram+=$4 }; END {print cpu,ram}'",(char *) 0); but in terminal i am getting following error: ERROR: Unsupported option (BSD syntax) I would like to know how to properly pass awk as argument to execl?

    Read the article

  • inline and member initializers

    - by Alexander
    When should I inline a member function and when should I use member initializers? My code is below.. I would like to modify it so I could make use some inline when appropriate and member initializers: #include "Books.h" Book::Book(){ nm = (char*)""; thck = 0; wght = 0; } Book::Book(const char *name, int thickness, int weight){ nm = strdup(name); thck = thickness; wght = weight; } Book::~Book(){ } const char* Book::name(){ return nm; } int Book::thickness(){ return thck; } int Book::weight(){ return wght; } // // Prints information about the book using this format: // "%s (%d mm, %d dg)\n" // void Book::print(){ printf("%s (%d mm, %d dg)\n", nm, thck, wght); } Bookcase::Bookcase(int id){ my_id = id; no_shelf = 0; } int Bookcase::id(){ return my_id; } Bookcase::~Bookcase(){ for (int i = 0; i < no_shelf; i++) delete my_shelf[i]; } bool Bookcase::addShelf(int width, int capacity){ if(no_shelf == 10) return false; else{ my_shelf[no_shelf] = new Shelf(width, capacity); no_shelf++; return true; } } bool Bookcase::add(Book *bp){ int index = -1; int temp_space = -1; for (int i = 0; i < no_shelf; i++){ if (bp->weight() + my_shelf[i]->curCapacity() <= my_shelf[i]->capacity()){ if (bp->thickness() + my_shelf[i]->curWidth() <= my_shelf[i]->width() && temp_space < (my_shelf[i]->width() - my_shelf[i]->curWidth())){ temp_space = (my_shelf[i]->width()- my_shelf[i]->curWidth()); index = i; } } } if (index != -1){ my_shelf[index]->add(bp); return true; }else return false; } void Bookcase::print(){ printf("Bookcase #%d\n", my_id); for (int i = 0; i < no_shelf; i++){ printf("--- Shelf (%d mm, %d dg) ---\n", my_shelf[i]->width(), my_shelf[i]->capacity()); my_shelf[i]->print(); } }

    Read the article

  • Elegant way for a recursive C++ template to do something different with the leaf class?

    - by Costas
    I have a C++ class template that makes an Array of pointers. This also gets typedefed to make Arrays of Arrays and so on: typedef Array<Elem> ElemArray; typedef Array<ElemArray> ElemArrayArray; typedef Array<ElemArrayArray> ElemArrayArrayArray; I would like to be able to set one leaf node from another by copying the pointer so they both refer to the same Elem. But I also want to be able to set one Array (or Array of Arrays etc) from another. In this case I don't want to copy the pointers, I want to keep the arrays seperate and descend into each one until I get to the leaf node, at where I finally copy the pointers. I have code that does this (below). When you set something in an Array it calls a CopyIn method to do the copying. But because this is templated it also has to call the CopyIn method on the leaf class, which means I have to add a dummy method to every leaf class that just returns false. I have also tried adding a flag to the template to tell it whether it contains Arrays or not, and so whether to call the CopyIn method. This works fine - the CopyIn method of the leaf nodes never gets called, but it still has to be there for the compile to work! Is there a better way to do this? #include <stdio.h> class Elem { public: Elem(int v) : mI(v) {} void Print() { printf("%d\n",mI); } bool CopyIn(Elem *v) { return false; } int mI; }; template < typename T > class Array { public: Array(int size) : mB(0), mN(size) { mB = new T* [size]; for (int i=0; i<mN; i++) mB[i] = new T(mN); } ~Array() { for (int i=0; i<mN; i++) delete mB[i]; delete [] mB; } T* Get(int i) { return mB[i]; } void Set(int i, T* v) { if (! mB[i]->CopyIn(v) ) { // its not an array, so copy the pointer mB[i] = v; } } bool CopyIn(Array<T>* v) { for (int i=0; i<mN; i++) { if (v && i < v->mN ) { if ( ! mB[i]->CopyIn( v->mB[i] )) { // its not an array, so copy the pointer mB[i] = v->mB[i]; } } else { mB[i] = 0; } } return true; // we did the copy, no need to copy pointer } void Print() { for (int i=0; i<mN; i++) { printf("[%d] ",i); mB[i]->Print(); } } private: T **mB; int mN; }; typedef Array<Elem> ElemArray; typedef Array<ElemArray> ElemArrayArray; typedef Array<ElemArrayArray> ElemArrayArrayArray; int main () { ElemArrayArrayArray* a = new ElemArrayArrayArray(2); ElemArrayArrayArray* b = new ElemArrayArrayArray(3); // In this case I need to copy the pointer to the Elem into the ElemArrayArray a->Get(0)->Get(0)->Set(0, b->Get(0)->Get(0)->Get(0)); // in this case I need go down through a and b until I get the to Elems // so I can copy the pointers a->Set(1,b->Get(2)); b->Get(0)->Get(0)->Get(0)->mI = 42; // this will also set a[0,0,0] b->Get(2)->Get(1)->Get(1)->mI = 96; // this will also set a[1,1,1] // should be 42,2, 2,2, 3,3, 3,96 a->Print(); }

    Read the article

  • create a dataset by using modulo division method

    - by ayoom
    create a dataset with 101 integers. Use the modulo division method of hashing to store the random data values into hash tables with table sizes of 7, 51, and 151. Use the linear probing and quadratic method of collision resolution. Print out the tables after the data values have been stored. Search for 10 different values in each of the three hash tables, counting the number of comparisons necessary. Print out the number of comparisons necessary in each case, in tabular form.

    Read the article

< Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >