Search Results

Search found 17130 results on 686 pages for 'computer lab'.

Page 212/686 | < Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >

• Lagging digital tv over ethernet

  - by Steve

  I have a HD Home Run TV over ethernet device, which connects the aerial to my router, and from there the router connects to my PC over about 15m of 100Mbps ethernet cable. The TV output lags every second. It does not do so for a computer much closer to the router. It is odd to me that the network rate is around 7Mbps on a 100Mbps cable. I am not downloading or streaming anything else on the affected computer. Is this lag caused by the speed of the cable, the length of the cable, or interference on the cable? I am considering swapping the ethernet cable with shielded ethernet cable.

  Read the article

• Odd internet packet routing

  - by NachoChip

  I want to know is there anyway to explicitly control the packet routing. I try to connect my computer in HK from San Francisco. It is extremely slow and I use tracert to see what is going on. It seems the packet get routed from HK to Europe and then to New York and then to San Francisco. In US, I am using Astound Cable. Is there any suggestion I can force the packet to not go around the world before it reach my computer? Or it is all ISP dependent?

  Read the article

• Installing Visual Studio 2010 Service Pack 1

  - by Martin Hinshelwood

  As has become customary when the product team releases a new patch, SP or version I like to document the install. This post seams almost redundant as I had no problems, but I think that is as valuable to other thinking of installing the Service Pack as all the problems that we sometimes get. As per Brian's post I am Installing Visual Studio Team Foundation Server Service Pack 1 first and indeed as this is a single server local deployment I need to install both. If I only install one it will leave the other product broken. Figure: Hopefully this will be more uneventful It takes a little while for your system to be checked to see what components need updating. On my main computer this was pretty quick, but on the laptop it took some time. Figure: There are a lot of components to update With this update also comes an update to .NET as well as many other components. Figure: I downloaded the full 1.5GB’s, but you could do a web install It depends on how good you internet connection is to how long it would take to download, but as I am now in the US I decided not to trust the internet connection speeds. It took around 30-40 minutes to download the full thing which is a little slow. Figure: I did not need to download, but that would increase the install time So on my main computer again this was fast, but again on my netbook this took a little while. Figure: The actual install took around 30-40 minutes (2 hours on netbook) I was pretty impressed with the speed of the install, and as Team Explore is now out of the box with Visual Studio 2010 I don’t get the problem of the SP being installed before Team Explorer and having a disjointed experience Figure: As I suspected, no problems with the install Figure: Checking in Visual Studio shows that all the servicing points were successful This was an easy experience even if the SP was over 1.5GB’s to download Hopefully I will be discovering things that work better for a good while to come, as well as not seeing holes in the product that I had no encountered yet. What were your experiences of installing Visual Studio 2010 Service pack 1?

  Read the article

• Does anyone still use Iometer?

  - by Brian T Hannan

  "Iometer is an I/O subsystem measurement and characterization tool for single and clustered systems. It is used as a benchmark and troubleshooting tool and is easily configured to replicate the behaviour of many popular applications." link text Does anyone still use this tool? It seems helpful, but I'm not sure if it's for the thing I am trying to work on. I am trying create a benchmark computer performance test that can be run before and after a Windows Optimization program does its stuff (ex: PC Optimizer Pro or CCleaner). I want to be able to make a quick statement like CCleaner makes the computer run 50% faster or something along those lines. Are there any newer tools like this one?

  Read the article

• Risk to native OS from Live CD?

  - by Frost Shadow

  Will booting from a Live CD (I was thinking Anonym OS) have any risk to the native OS? I wanted to try it out on my school´s computer, but I´d rather not have to explain why I accidentally reformatted the HD and deleted everything.. I know once you´ve booted the right way, it shouldn´t leave any trace on the HD, but is it possible I can push some wrong button and end up trying to overwrite the native with the Live OS? Also, since the computer itself is connected to the internet, will the network administrator be able to see that i´ve booted from a Live CD? I´m thinking yes, but just thought I´d check. Thanks for any help!

  Read the article

• Assisting a user using VNC

  - by wizlog

  I'm trying to help a friend with their computer remotely. He has a version of VNC, I'm not sure which one, so I downloaded and installed the VNC Viewer and Listening Viewer. I ask my friend for his IP address and port number, and he tells me that every time he's used it, the person giving him assistance (remotely controlling his computer) gave him some kind of number. I should note that my friend is not tech savy, and it may have been an IP address, but I'm not sure. What kind of number would the user be looking for? Does this indicate his version of VNC, Does that even matter? I am completly forign to VNC and don't know where to begin looking for an answer myself, and (for whatever reason) I can't ask my friend to figure out what version of VNC he is using.

  Read the article

• Netbeans: Install/Activate/Uninstall/Deactivate plugins buttons disabled

  - by Josh

  I recently installed Netbeans 6.9 on a new computer. I went to install the NB Android plugin, which I have on another computer, but I found most of the functionality of the plugins window disabled. The install, uninstall, activate, and deactivate buttons are grayed out. I have included images at the bottom. This hasn't happened to me before, and searching Google hasn't turned up anything useful. I thought it might have been a permission problem so I tried running Netbeans with gksudo but that didn't help. I also thought it might have been something wonky with the Ubuntu Software Center install, so I uninstalled that one, and downloaded Netbeans from the main site and I installed it in my home directory, but it does the same thing. I'm running Xubuntu 10.10 and Netbeans 6.9.1 Available Plugins Tab It won't let me add more than one hyperlink due to a lack of reputation. Installed Tab - http + i.imgur.com/Nhqi4.png

  Read the article

• Do you know of an online back up & sync solution for Windows that actually works?

  - by Hermann

  I've been looking for some time for a program that backups your data to the cloud and is also able to sync 2 or more computers. By syncing I mean, if I change something on one computer that it should also apply the same change on another computer. I've tried two solutions so far which looked good initially but ultimately failed because they were buggy or simply don't work, or both. Syncplicity has messed up my file structure several times and they don't fix fix bugs that are literally over a year old. I then switched to SpiderOak which looked promising but ultimately had the same problems. Messed up my file structure several times, sometimes sync simply doesn't work, it's extremely inefficient and they keep pushing out releases were they say they fixed the sync bugs I reported but they did't. Does anyone of you know of an online sync solution that actually works?

  Read the article

• Can't bring NAT to work

  - by user31738

  Hello, I bought a D-link DIR-300 wireless router and i can't bring NAT to work, i have an ssh and http service i need to forward to the internet. My connection is as follows: I have an ADSL connection, i'm using a ADSL ethernet modem connected and working, it doesnt let me put it on bridge mode. I have my router connected to my adsl modem through ethernet, it gets its ip through DHCP (and i'ts always the same) I have a desktop computer running linux with apache and openssh configured and working, it has fixed ip. I configured the NAT in the modem forwarding port 22 from the router ip to the internet. In the router i setup NAT forwarding port 22 from the desktop computer fixed ip to out there. This setup already worked with a fonera i had before, can anyone help me with this or tell me what kind of tests do i need to do? How can i test if the router is forwarding ports correctly before the modem?

  Read the article

• Server 2008 Likes to restart itself

  - by Campo

  I have a weird issue here. I notice about once a week the web server restarts itself. This would be only a minor issue if we were not planning on implementing an IP failover. I have checked the event logs. I don't see anything that indicates a reason for the restart. I need some help diagnosing the reason the server restarts. It happened last night at 5:00AM Last even in the log was 1 hour before the unexpected shutdown. Here is the Log for the shutdown event. Any help is much appreciated. I know there isn't much to go on yet. Log Name: System Source: EventLog Date: 5/5/2010 5:01:12 AM Event ID: 6008 Task Category: None Level: Error Keywords: Classic User: N/A Computer: SERVERNAME Description: The previous system shutdown at 4:56:41 AM on 5/5/2010 was unexpected. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="EventLog" /> <EventID Qualifiers="32768">6008</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2010-05-05T09:01:12.000Z" /> <EventRecordID>346094</EventRecordID> <Channel>System</Channel> <Computer>SERVERNAME</Computer> <Security /> </System> <EventData> <Data>4:56:41 AM</Data> <Data>5/5/2010</Data> <Data> </Data> <Data> </Data> <Data>39594</Data> <Data> </Data> <Data> </Data> <Binary>DA070500030005000400380029008E03DA070500030005000800380029008E033C0000003C000000000 000000000000000000000000000000100000000000000</Binary> </EventData> </Event>

  Read the article

• backup software that ignores user rights

  - by Chris

  Hi, As a computer technician I have to reinstall systems allmost daily (when it can't be repaired ;-)) My problem is that I recover user files by hand and a external mounting device. Most of the time it works fine, but also weekly I have systems with passwords and personal files which are often not sucessfull recovered. I know you can change owner, but when people have 30 GB's af data, my backup computer works for ages to change the rights. Can anyone think of software (commercial is no problem) which does the following: * backup user data without having user rights troubles * have a option to choose what to backup (email accounts, documents, etc, etc) even when it's externaly mounted, in short, it reconizes the folder structure) * Works on different OS's like XP, Vista, W7

  Read the article

• How do I restore a Dell Inspiron 1521 laptop to factory defaults?

  - by Solignis

  I got a Dell Inspiron 1521 laptop from a local computer store that a buddy of mine works at. When I turned it on I had come to realize it has not been wiped and reverted to factory defaults. How can revert the machine to factory defaults? I do not have any of the CDs that came with the machine, all I have is the computer and the power brick. But if it helps any I can able to get into Windows so I full access to the machine.

  Read the article

• Ubuntu Slow - What architecture does the Windows Installer install?

  - by Benjamin Yep

  I feel absolutely limited by using Windows, and I need to switch to a Unix environment. I once installed Red Hat on my lappie (screen + external monitor setup; 4GB ram; x64; runs fast) and it worked fine, but I saw that the computer cluster that is the birthplace of my unix knowledge switched to Ubuntu, so naturally I follow. To the point. When I installed Ubuntu onto my machine via the Windows Installer, it ran quite slow. Opening Firefox takes about 8-9 seconds, it freezes up often, unable to handle its own background processes. I saw in a thread that, perhaps, it is running slow because the Windows Installer is installing an x64 version. Of course, my computer has had no performance issues in the past(except that time with the trojans but you know, know one is perfect ;) ) Anyways, I uninstalled Ubuntu, freeing up the max allocated memory it took up, and continue to be sad, trapped in my MS world with only a buggy Cygwin, any assistance is greatly appreciated! :) Thanks ~Ben

  Read the article

• How to create a separated network to customers only?

  - by Valter Henrique

  I work in a company where we have a network ethernet and wi-fi, we would like to create a network where our customers could access our network but don't have access to our computer network. This access would be internet only, nothing more. The customers will not see our computers and the files that we share in our network. I have two routers, how can I do this ? A Cisco Linksys Wireless-N Broadband Router WRT160N V3 and a Netgear Wireless G Router WGR614 v9 and about firewalls there´s only windows firewalls in each computer by default.

  Read the article

• Isass.exe Application error

  - by shelbang

  I own a hp mini. It has come up with a blue screen and says: The Application failed to intialize properly (0xc0000005). Click on OK to terminate the application. i click on it twice but it stayed on the blank blue screen. i have tryed going on the safe mode thingy.. and pressing F9 and F10 and F8 but none of the above work. Considering its a HP mini- it doesnt have a cd rom compartment!?!? pleasee help !! i cant live without my computer! ): - ps using sisters computer atm :S shhh

  Read the article

• Error when adding to the domain : the specified server cannot perform the requested operation

  - by James

  When we add computers to the domain in Windows 7, we get the error: Changing the Primary Domain DNS name of this computer to "" failed. The name will remain "domain.com". The error was: The specified server cannot perform the requested operation. This happens on multiple computers and retrying yields the same result. Despite the error, the computer is still able to login to the domain ok. The DCs are windows 2003. Has anyone found a way to get rid of this error? Any help is appreciated.

  Read the article

• Can I recover a lost text file in Windows 7?

  - by Marcus Johnson

  How can I recover a lost text file in Windows 7?? It has very important information in it and of course, it is gone because of the stupid Windows Update thing....it just automatically closed all of my stuff and restarted my computer!! Would the text file possibly be in the Temp folder in my computer?? I don't know much about this stuff...but I need it. I didn't save the file which makes me think I can never get it back...but I want to make sure. Thanks. I was using notepad.

  Read the article

• diagnostic software for wifi adapter

  - by Nathan Fellman

  I'm having trouble with my wifi connection. Is there any software out there that can help me determine if the problem is in the drivers or in the hardware? Regretfully, I'm working on Vista Edit: The problem I'm having is that the Vista reports that the wireless radio is connected, shows an IP and all, the router also shows that the computer is connected, but there's no connectivity. I can't logon to the router, and I can't even ping it. When I ping it I get the response: General Failure I have tried connecting with and without various wireless security protocols. I have tried disabling the wireless adapter and re-enabling it from the Device Manager I have tried updating the driver None of this has helped. When I connect via Ethernet (with a cable, that is), everything works fine. Edit: I'm not using any firewall on the computer, that I'm aware of. The IP address for the WIFI adapter is similar to the one for the LAN adapter. They differ by one.

  Read the article

• How to lock the c prompt?

  - by allindal

  Is there anyway to lock the command prompt? I need my computer to require a password to use the command prompt. I lock the workstation occasionally but sometimes I forget and if I could just prevent my roommate from doing the "c: net user user *" to change my password it would be great. I do not want to have to use the rundll.32 user command with script to automatically lock the computer. Just a way to lock the c prompt. Sorry for not saying this earlier, I'm running a vista 32bit Asus gene II motherboard with a core i7 CPU

  Read the article

• Restart and/or graphics problem in Ubuntu 12.04

  - by kara

  I having been using 12.04 for a couple of months now, with v. little problems. The other day I restarted my computer, and though I think it rebooted, the screen would be black. I could not even get a visual from a live cd. Finally, I was able to get it to load, but the resolution has been completely off. The computer thinks I have a laptop screen, when I actually have a ViewSonic VP2330wb, and it detects only two resolutions. And still, I have a problem with rebooting. If the screen locks after I leave it for a while, I can't get a visual back, and then when I force a shutdown, it takes 3 times for me to get a grub screen. Then I have to boot in recovery mode, and then finally in normal mode, but the screen is still always off. This is my video card: description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:fe000000-fe3fffff memory:d0000000-dfffffff ioport:f000(size=64) I am a new ubuntu user, and am at my wits end. Any help would be greatly appreciated.

  Read the article

• Dual-Boot Problem

  - by user171379

  I have a HP laptop that originally had Windows 7 OS on it, I partioned the drive and allocated 100gb (est.) for the ubuntu install. the install went fine i have ubuntu and windows 7 still on the computer. But I can not get the OS boot screen to show ubuntu as an OS. I can while start up pull up the start menu screen via ESC. Key and press F9 for Boot Device Options and get the boot manager screen and it lists... OS boot manager, Ubuntu (Hitachi HTS 543232A7A384), boot from EFI file, and Notebook Hard Drive... I can boot Ubuntu from this screen by selecting Ubuntu. But i would like to make it easier to access. The computer boot is not for myself otherwise it would not be a problem i would remove windows altogether. I would like to make it basically "User Friendly" if that's at all possible and make the OS boot screen show Ubuntu as a bootable OS as well as Windows 7. on the boot selection screen. Any help on this issue would be greatly appreciated, I've looked to see if i could find the answer and maybe i've overlooked something so here I am. Like i said i need it to be as user friendly as possible and force the user to choose windows 7 or ubuntu not send them into one or the other without them being allowed to choose. I can get any information you might need if necessary but i dont know exactly what you'll need other than what i've given. Ubuntu version is the 13.04 just so you know.

  Read the article

• What happens when you add a Graphics card to a i7 with build in graphics (e.g. HD 4000)

  - by Matt

  I'm thinking of upgrading my computer from an AMD Phenom II X4 955BE with a AMD Radeon HD 6800 Graphics card (not integrated) to using a Intel Core i7 3770. As I have no knowledge of integrated graphics, my question is, what happens to the computing power when not using the HD4000 integrated graphics of the CPU (does it mean the CPU will run faster then it would if I relied on it?) Also what is better the CPUs inbuilt HD4000 or my Radeon Graphics card? I am mostly interested in terms of content creation: Using Adobe After Effects, 3D Rendering etc. Not too bothered about gaming performance. I will be using the spare parts of this build and older systems to make a second computer for network renders so what will be the advantages of keeping the Radeon with the current system for that?

  Read the article

• VisualSVN Server , Windows 7 and Apache Problem

  - by Ash

  I am running Visual SVN Server(with Apache) on a Windows 7 computer and network. After about 15-20 minutes of my first commit/update, I am unable to access the repository via Tortoise SVN. The error message I get is: OPTIONS of "https://jason/svn/repository1": could not connect to server (https://jason) Restarting the Visual SVN Server service helps sometimes but fails quite often. The only sure-shot way to get it working is to restart the computer. The server - https://jason is also not accessible via the browser when I get this error 1) I tried reinstalling Windows 7, Visual SVN server and Tortoise SVN but I still keep getting this error. 2) I searched several forums but I dont seem to be able to find an answer. Please help.

  Read the article

• How do I grant permissions to remotely start/stop a service using Powershell?

  - by splattered bits

  We have a PowerShell script that restarts a service on another computer. When we use PowerShell's built-in service control cmdlets, like so: $svc = Get-Service -Name MyService -ComputerName myservicehostname Stop-Service -InputObject $svc Start-Service -InputObject $svc We get this error back: Stop-Service : Cannot open MyService service on computer 'myservicehostname'. However, when we use sc.exe, like so: C:\Windows\System32\sc \\myservicehostname stop MyService C:\Windows\System32\sc \\myservicehostname start MyService the start and stop succeed. The user doing the restarting is not an administrator. We use subinacl to grant the user permissions to start/stop and query the service: subinacl.exe /service MyService /GRANT=MyServiceControlUser=STO How come PowerShell can't stop my service but sc.exe can?

  Read the article

• Looking for Full Screen Web-Browser in Vizio or Samsung TV's

  - by ScottCate

  I see that Google TV, inside Sony, has a Chrome browser. Is the same thing possible inside Vizio, or Samsung, or any other TV? The 42" Vizio is $499 at Costco, and the Sony with Google TV is $999. We're looking at a buch of these TV's that have build in Wi-Fi, to place around the office as Big Dashboards, and I don't want to have a computer attached to get web content on the screen. It's my understanding that both Samsung Apps, and Vizio Apps, use Yahoo Widgets as their ap engine. Anyone know of a way to get a full screen browser going, without attaching a computer? We thought of attaching an Apple TV, which can be jailbroken, but that is just another piece of equipment to lose, break, etc. Thank you!

  Read the article

< Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >