Search Results

Search found 64327 results on 2574 pages for 'test first'.

Page 212/2574 | < Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >

• What can cause my code to run slower when the server JIT is activated?

  - by durandai

  I am doing some optimizations on an MPEG decoder. To ensure my optimizations aren't breaking anything I have a test suite that benchmarks the entire codebase (both optimized and original) as well as verifying that they both produce identical results (basically just feeding a couple of different streams through the decoder and crc32 the outputs). When using the "-server" option with the Sun 1.6.0_18, the test suite runs about 12% slower on the optimized version after warmup (in comparison to the default "-client" setting), while the original codebase gains a good boost running about twice as fast as in client mode. While at first this seemed to be simply a warmup issue to me, I added a loop to repeat the entire test suite multiple times. Then execution times become constant for each pass starting at the 3rd iteration of the test, still the optimized version stays 12% slower than in the client mode. I am also pretty sure its not a garbage collection issue, since the code involves absolutely no object allocations after startup. The code consists mainly of some bit manipulation operations (stream decoding) and lots of basic floating math (generating PCM audio). The only JDK classes involved are ByteArrayInputStream (feeds the stream to the test and excluding disk IO from the tests) and CRC32 (to verify the result). I also observed the same behaviour with Sun JDK 1.7.0_b98 (only that ist 15% instead of 12% there). Oh, and the tests were all done on the same machine (single core) with no other applications running (WinXP). While there is some inevitable variation on the measured execution times (using System.nanoTime btw), the variation between different test runs with the same settings never exceeded 2%, usually less than 1% (after warmup), so I conclude the effect is real and not purely induced by the measuring mechanism/machine. Are there any known coding patterns that perform worse on the server JIT? Failing that, what options are available to "peek" under the hood and observe what the JIT is doing there?

  Read the article

• Strings exported from a module have extra line breaks

  - by Jesse Millikan

  In a DrScheme project, I'm using a MrEd editor-canvas% with text% and inserting a string from a literal in a Scheme file. This results in an extra blank line in the editor for each line of text I'm trying to insert. I've tracked this down to the apparent fact that string literals from outside modules are getting extra line breaks. Here's a full example. The editor is irrelevant at this point, but it displays the result. ; test-literals.ss (module test-literals scheme (provide (all-defined-out)) (define exported-string "From another module with some more line breaks. ")) ; editor-test.ss (module editor-test scheme (require mred "test-literals.ss") (define w (instantiate frame% ("Editor Test" #f) )) (define c (instantiate editor-canvas% (w) (line-count 12) (min-width 400))) (define editor (instantiate text% ())) (send c set-editor editor) (send w show #t) (send editor erase) (send editor insert "Some text with some line breaks. ") (send editor insert exported-string)) And the result in the editor is Some text with some line breaks. From another module with some more line breaks.

  Read the article

• How to convert many thousands of lines of VBScript to C#?

  - by Ross Patterson

  I have a collection of about 10,000 small VBScript programs (50-100 lines each) and a small collection of larger ones, and I'm looking for a way to convert them to C# without resorting to by-hand transliteration. The programs are automated test cases for a web application, written for HP/Mercury's QuickTest Pro, and I'm trying to turn them into test cases for Selenium. Luckily, the tests appear to be well-written, using a library of building blocks and idioms (the larger programs), so the test cases actually resemble a domain-specific language more than they do VBScript, and the QTP-ness is well-buried inside the libraries. Ideally, what I'm searching for is a tool that can do the syntactic transformation from VBScript to C# for both the dsl-ish test cases and also the more complicated building-block libraries. That would leave me with a manual cleanup of the libraries, and probably very little work on the test cases. If I could find a VBScript-to-VB.NET translator, I'd take that also, as I suspect I could compile the VB.NET and then de-compile to C# using .NET Relector or something similar. Plan B is to write a translator of my own for the test cases, since they're in a very straight-line style, but it wouldn't help with the libraries. Any suyggestions? I haven't written a compiler in at least 15 years, and while I haven't forgotten how, I'm not looking forward to it - least of all for VBScript!

  Read the article

• PHP: Is there an elegant way to foreach through multiple items (groups) at a time?

  - by acheong87

  Given an array of N items: $arr = array('a', 'b', 'c', 'd', 'e', 'f'); What's the most elegant way to loop through in groups of M items (assuming N is divisible by M)? I tried foreach (array_chunk($arr, 2) as list($first, $second)) { // do stuff with $first and $second } but this resulted in a syntax error. In other words, I want to emulate what in Tcl would look like this: set arr [a b c d e f] foreach {first second} $arr { // do stuff with $first and $second } For now I've resorted to the obvious measure: foreach (array_chunk($arr, 2) as $group) { $first = $group[0]; $second = $group[1]; // do stuff with $first and $second } But I'm hoping someone has a more elegant method...

  Read the article

• php compare array keys, not values

  - by user271619

  I am successfully using the array_key_exists(), as described by php.net Example: <?php $search_array = array('first' => 1, 'second' => 4); if (array_key_exists('first', $search_array)) { echo "The 'first' element is in the array"; } ?> But, take out the values, and it doesn't work. <?php $search_array = array('first', 'second'); if (array_key_exists('first', $search_array)) { echo "The 'first' element is in the array"; } ?> Not sure how to only compare 2 arrays by their keys only.

  Read the article

• "One or more breakpoints cannot be set and have been disabled. Execution will stop at the beginning

  - by sam

  I set a breakpoint in my code in Visual-C++, but when I run, I see the error mentioned in the title. I know this question has been asked before on Stack Overflow (http://stackoverflow.com/questions/657470/breakpoints-cannot-be-set-and-have-been-disabled-problem), but none of the answers there fully explained the problem I'm seeing. The closest I can see is something about the linker, but I don't understand that - so if someone could explain in more detail that would be great. In my case, I have 2 projects in Visual C++ - the production dsw, and the test code dsw. I have loaded and rebuilt both dsws in debug mode. I want a breakpoint in the production code, which is run via the test scripts. My issue is I get the error message when I run the test code, because the break point is in the production code, which isn't loaded up when the test starts. Near the beginning of the test script there is a mytest_initialize() command. I imagine this goes off and loads up the production dll. Once this line has executed, I can put the breakpoint in my production code and run until I hit it. But it's quite annoying to have to run to this line, set the breakpoint and continue every time I want to run the test. So I think the problem is Visual C++ doesn't realise the two projects are related. Is this a linker issue? What does the linker do and what settings should I change to make this work? Thanks in advance. Apologies if instead I should be appending this question to the existing one, this is my first post so not quite sure how this should work.

  Read the article

• Django unit testing: South-migrated DB works in MySQL, throws duplicate PK error in PostGreSQL. Am I

  - by unclaimedbaggage

  Hi folks, (Worth starting off with a disclaimer: I'm very new to PostGreSQL) I have a django site which involves a standard app/tests.py testing file. If I migrate the DB to MySQL (through South),, the tests all pass. However in PostGresQL, I'm getting the following error: IntegrityError: duplicate key value violates unique constraint "business_contact_pkey" Note this happens while unit testing only - the actual page runs fine in both MySQL & PostGresql. Really having a heckuva time figuring this one out. Anyone have ideas? Below are the Postgresql "\d business_contact" & offending tests.py method if they help. No changes made to either DB except the (same) South migrations Thanks first_name | character varying(200) | not null mobile_phone | character varying(100) | surname | character varying(200) | not null business_id | integer | not null created | timestamp with time zone | not null deleted | boolean | not null default false updated | timestamp with time zone | not null slug | character varying(150) | not null phone | character varying(100) | email | character varying(75) | id | integer | not null default nextval('business_contact_id_seq'::regclass) Indexes: "business_contact_pkey" PRIMARY KEY, btree (id) "business_contact_slug_key" UNIQUE, btree (slug) "business_contact_business_id" btree (business_id) Foreign-key constraints: "business_id_refs_id_772cc1b7b40f4b36" FOREIGN KEY (business_id) REFERENCES business(id) DEFERRABLE INITIALLY DEFERRED Referenced by: TABLE "business" CONSTRAINT "primary_contact_id_refs_id_dfaf59c4041c850" FOREIGN KEY (primary_contact_id) REFERENCES business_contact(id) DEFERRABLE INITIALLY DEFERRED TEST DEF: def test_add_business_contact(self): """ Add a business contact """ contact_slug = 'test-new-contact-added-new-adf' business_id = 1 business = Business.objects.get(id=business_id) postdata = { 'first_name': 'Test', 'surname': 'User', 'business': '1', 'slug': contact_slug, 'email': '[email protected]', 'phone': '12345678', 'mobile_phone': '9823452', 'business': 1, 'business_id': 1, } #Test to ensure contacts that should not exist are not returned contact_not_exists = Contact.objects.filter(slug=contact_slug) self.assertFalse(contact_not_exists) #Add the contact and ensure it is present in the DB afterwards """ contact_add_url = '%s%s/contact/add/' % (settings.BUSINESS_URL, business.slug) self.client.post(contact_add_url, postdata) added_contact = Contact.objects.filter(slug=contact_slug) print added_contact try: self.assertTrue(added_contact) except: formset = ContactForm(postdata) print formset.errors self.assertFalse(True, "Contact not found in the database - most likely, the post values in the test didn't validate against the form")

  Read the article

• Configuring TeamCity + NUnit unit tests so files can be loaded properly

  - by Dave

  In a nutshell, I have a solution that builds fine in the IDE, and the unit tests all run fine with the NUnit GUI (via the NUnitit VS2008 plugin). However, when I execute my TeamCity build runner, all unit tests that require file access (e.g. for running tests against specific XML files), I just get System.IO.DirectoryNotFoundExceptions. The reason for this is clear: it's looking for those supporting XML files loaded by various unit tests in the wrong folder. The way my unit tests are structured looks like this: +-- project folder +-- unit tests folder +-- test.xml +-- test.cs +-- project file.xaml +-- project file.xaml.cs All of my projects own their own UnitTests folder, which contains the .cs file and any XML files, XML Schemas, etc that are necessary to run the tests. So when I write my test.cs, I have it look for "test.xml" in the code because they are in the same folder (actually, I do something like ....\unit tests\test.xml, but that's kind of silly). As I said before, the tests run great in NUnit. But that's because the unit tests are part of the project. When running the unit tests from TeamCity, I am executing them against the assemblies that get copied to the main app's output folder. These unit test XML files should not be copied willy-nilly to the output folder just to make the tests pass. Can anyone suggest a better method of organizing my unit tests in each project (which are dependencies for the main app), such that I can execute the unit tests from NUnit and from the TeamCity build runner? The only other option I can come up with is to just put the testing XML data in code, rather than loading it from a file. I would rather not do this.

  Read the article

• def constrainedMatchPair(firstMatch,secondMatch,length):

  - by smart

  matches of a key string in a target string, where one of the elements of the key string is replaced by a different element. For example, if we want to match ATGC against ATGACATGCACAAGTATGCAT, we know there is an exact match starting at 5 and a second one starting at 15. However, there is another match starting at 0, in which the element A is substituted for C in the key, that is we match ATGC against the target. Similarly, the key ATTA matches this target starting at 0, if we allow a substitution of G for the second T in the key string. consider the following steps. First, break the key string into two parts (where one of the parts could be an empty string). Let's call them key1 and key2. For each part, use your function from Problem 2 to find the starting points of possible matches, that is, invoke starts1 = subStringMatchExact(target,key1) and starts2 = subStringMatchExact(target,key2) The result of these two invocations should be two tuples, each indicating the starting points of matches of the two parts (key1 and key2) of the key string in the target. For example, if we consider the key ATGC, we could consider matching A and GC against a target, like ATGACATGCA (in which case we would get as locations of matches for A the tuple (0, 3, 5, 9) and as locations of matches for GC the tuple (7,). Of course, we would want to search over all possible choices of substrings with a missing element: the empty string and TGC; A and GC; AT and C; and ATG and the empty string. Note that we can use your solution for Problem 2 to find these values. Once we have the locations of starting points for matches of the two substrings, we need to decide which combinations of a match from the first substring and a match of the second substring are correct. There is an easy test for this. Suppose that the index for the starting point of the match of the first substring is n (which would be an element of starts1), and that the length of the first substring is m. Then if k is an element of starts2, denoting the index of the starting point of a match of the second substring, there is a valid match with one substitution starting at n, if n+m+1 = k, since this means that the second substring match starts one element beyond the end of the first substring. finally the question is Write a function, called constrainedMatchPair which takes three arguments: a tuple representing starting points for the first substring, a tuple representing starting points for the second substring, and the length of the first substring. The function should return a tuple of all members (call it n) of the first tuple for which there is an element in the second tuple (call it k) such that n+m+1 = k, where m is the length of the first substring.

  Read the article

• Jquery load DIV inside another DIV at same page

  - by Sergio

  HTML: <div class="someclass" rel="first">text 1</div> <div class="someclass" rel="second">text 2</div></div></div> <div class="info_ly">here is some text</div> <div class="first" > the first DIV </div> <div class="second" > the second DIV </div> CSS: .first{ display:none} .second{ display:none} Jquery: $(".someclass").click(function() { $(".info_ly").html($(this).attr('rel')); }); I want to call and load the "rel" DIV inside "info_ly" DIV. With this Jquery code I get only text "first" or "second" inside "info_ly" DIV. How can I load the DIV with the class "first" or DIV with the class "second" inside "info_ly" DIV?

  Read the article

• Hide struct definition in static library.

  - by BobMcLaury

  Hi, I need to provide a C static library to the client and need to be able to make a struct definition unavailable. On top of that I need to be able to execute code before the main at library initialization using a global variable. Here's my code: private.h #ifndef PRIVATE_H #define PRIVATE_H typedef struct TEST test; #endif private.c (this should end up in a static library) #include "private.h" #include <stdio.h> struct TEST { TEST() { printf("Execute before main and have to be unavailable to the user.\n"); } int a; // Can be modified by the user int b; // Can be modified by the user int c; // Can be modified by the user } TEST; main.c test t; int main( void ) { t.a = 0; t.b = 0; t.c = 0; return 0; } Obviously this code doesn't work... but show what I need to do... Anybody knows how to make this work? I google quite a bit but can't find an answer, any help would be greatly appreciated. TIA!

  Read the article

• Why doesn't access database update?

  - by Ryan

  Recently I met a strange problem, see code snips as below: var sqlCommand: string; connection: TADOConnection; qry: TADOQuery; begin connection := TADOConnection.Create(nil); try connection.ConnectionString := 'Provider=Microsoft.Jet.OLEDB.4.0;Data Source=Test.MDB;Persist Security Info=False'; connection.Open(); qry := TADOQuery.Create(nil); try qry.Connection := connection; qry.SQL.Text := 'Select * from aaa'; qry.Open; qry.Append; qry.FieldByName('TestField1').AsString := 'test'; qry.Post; beep; finally qry.Free; end; finally connection.Free; end; end; First, Create a new access database named test.mdb and put it under the directory of this test project, we can create a new table named aaa in it which has only one text type field named TestField1. We set a breakpoint at line of "beep", then lunch the test application under ide debug mode, when ide stops at the breakpoint line (qry.post has been executed), at this time we use microsoft access to open test.mdb and open table aaa you will find there are no any changes in table aaa, if you let the ide continue running after pressing f9 you can find a new record is inserted in to table aaa, but if you press ctrl+f2 to terminate the application at the breakpoint, you will find the table aaa has no record been inserted, but in normal circumstance, a new record should be inserted in to the table aaa after qry.post executed. who can explain this problem , it troubles me so long time. thanks !!! BTW, the ide is delphi 2010, and the access mdb file is created by microsoft access 2007 under windows 7

  Read the article

• Why has my computer started to make noises when I turn it on after I put it into sleep mode for the first time a week ago?

  - by Acid2

  I would usually have my pc on all day and fully shut it down at night time before I went to bed. I decided to put it into sleep mode instead the other day and everything was fine but when I woke it from sleep, I was presented with the blue screen of death and it started with some weird noise that sounded like some spinning part was off balance or possibly hitting something periodically. Sounds like it could be a fan or maybe the HDD. I'm not sure why sleep mode would mess up the hardware. Anyway, now sometimes, randomly, when I turn my computer on from a previous shut down, I still get to hear the noise but the start-up is normal. Sometimes I don't hear anything for the entire duration while I have it on and sometimes it goes away after a few minutes and sometimes it doesn't and I have to restart, like it isn't going away right now. I can hear the noise as I type this. Anyone got possible solutions? I don't want to open the system and mess up other stuff. I'm also not sure if I should take it somewhere to have it fixed - it might not make the noise then and work like normal and nothing would seem like needing to be fixed. Add: I'm running Windows 7, if that's of any relevance.

  Read the article

• C++ Header file questions

  - by Karl

  So I'm trying to learn C++ and I've gotten as far as using header files. They really make no sense to me. I've tried many combinations of this but nothing so far has worked: Main.cpp: #include "test.h" int main() { testClass Player1; return 0; } test.h: #ifndef TEST_H_INCLUDED #define TEST_H_INCLUDED class testClass { private: int health; public: testClass(); ~testClass(); int getHealth(); void setHealth(int inH); }; #endif // TEST_H_INCLUDED test.cpp: #include "test.h" testClass::testClass() { health = 100; } testClass::~testClass() {} int testClass::getHealth() { return(health); } void testClass::setHealth(int inH) { health = inH; } What I'm trying to do is pretty simple, but the way the header files work just makes no sense to me at all. Code blocks returns the following on build: obj\Debug\main.o(.text+0x131)||In function main':| *voip*\test\main.cpp |6|undefined reference totestClass::testClass()'| obj\Debug\main.o(.text+0x13c):voip\test\main.cpp|7|undefined reference to `testClass::~testClass()'| ||=== Build finished: 2 errors, 0 warnings ===| I'd appreciate any help. Or if you have a decent tutorial for it, that would be fine too (most of the tutorials I've googled haven't helped)

  Read the article

• how to assign the html value to the php variable without post or get method

  - by Meena

  hi , in my program i had a php value $test = 2 using this value i done some operation for example: in my page i had a 2 block A and B and one select box. If the test value is A it enable the div A, if the value is B it hide div A and also i am able to show and hide the div using the select box onchange event. please check my sample code given below $test = $_GET["id"]; <select name="hideme" id="hideme" onchange="enableme();"> <option value="A">Show</option> <option value="B">Hide</option> </select> if($test == 'A') { <div id="div1" name="div1"> xxxxxxxxxxxxx </div> } Js Function : function enableme() { if(document.getElementByID('hideme').value == "A") { document.getElementById.style.display ="block"; } else { document.getElementById.style.display ="none"; } } my issue is at fist time using the $test($_get) value it show the correct div but the on change event is not working because of , if condition. If i remove the if condition then it show div A even if the value of the $test is B. how could i handle both. Please Help me

  Read the article

• cURL cookie negative cookie expire

  - by Joe Doe

  I have problems with cookies with cURL. After problems I turned on verbose function and figured out cURL sets them negative expire date even if server sends positive date. Example: * Added cookie _c_sess=""test"" for domain test.com, path /, expire -1630024962 < Set-Cookie: _c_sess="test"; Domain=test.com; HttpOnly; expires=Mon, 26-Mar-2012 14:52:47 GMT; Max-Age=1332773567; Path=/ As you can see both expires and max-age are positive, but cURL sets expire to negative value. Somebody has idea? EDIT: Here is php code I use. $ch = curl_init(); curl_setopt($ch, CURLOPT_URL, "http://site.com/"); curl_setopt($ch, CURLOPT_USERAGENT, 'Mozilla/5.0 (Windows NT 6.1; rv:11.0) Gecko/20100101 Firefox/11.0'); curl_setopt($ch, CURLOPT_COOKIEJAR, $cookiepath); curl_setopt($ch, CURLOPT_COOKIEFILE, $cookiepath); curl_setopt($ch, CURLOPT_HEADER ,1); curl_setopt($ch, CURLOPT_VERBOSE ,1); curl_setopt($ch, CURLOPT_STDERR ,$f); curl_setopt($ch, CURLOPT_RETURNTRANSFER ,1); curl_setopt($ch, CURLOPT_FOLLOWLOCATION ,1); curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, 0); $data = curl_exec($ch); Data from cookie jar: #HttpOnly_.test.com TRUE / FALSE -1630016318 _test_sess "test"

  Read the article

• testng multiple suites

  - by Eli

  Hi people. my problem is as follows: i am testing a web-ui using selenium and testng. i have a test suite with many test classes in it. i have a method with the @BeforeSuite witch also has a @Parameters annotation, this method recieves as a parameter the browser in witch the selenium will test by run,executing the lines: selenium = new DefaultSelenium("localhost", 4444, **browser**, "http://localhost:8099"); selenium.start(); the xml im using to run the test suite is: <suite name="suite"> <parameter name = "browser" value = "*firefox"/> <test name="allTests"> <classes> <class name="test.webui.MemcachedDeploymentTest" /> </classes> </test> </suite> this works fine and the test runs in firefox. my problem is that i would like to somehow run this suite again, immediatly after the first run finishes, but this time with chrome as the browser. i now have 2 xml suites, one with chrome and one with firefox, is there any way to run these test suites one after the other automatically? maybe using a third xml? Thanks in advance

  Read the article

• Why do R objects not print in a function or a "for" loop?

  - by Sal Leggio

  I have an R matrix named ddd. When I enter this, everything works fine: i <- 1 shapiro.test(ddd[,y]) ad.test(ddd[,y]) stem(ddd[,y]) print(y) The calls to Shapiro Wilk, Anderson Darling, and stem all work, and extract the same column. If I put this code in a "for" loop, the calls to Shapiro Wilk, and Anderson Darling stop working, while the the stem & leaf call and the print call continue to work. for (y in 7:10) { shapiro.test(ddd[,y]) ad.test(ddd[,y]) stem(ddd[,y]) print(y) } The decimal point is 1 digit(s) to the right of the | 0 | 0 0 | 899999 1 | 0 [1] 7 The same thing happens if I try and write a function. SW & AD do not work. The other calls do. > D <- function (y) { + shapiro.test(ddd[,y]) + ad.test(ddd[,y]) + stem(ddd[,y]) + print(y) } > D(9) The decimal point is at the | 9 | 000 9 | 10 | 00000 [1] 9 Why don't all the calls behave the same way?

  Read the article

• How do you tell that your unit tests are correct?

  - by Jacob Adams

  I've only done minor unit testing at various points in my career. Whenever I start diving into it again, it always troubles me how to prove that my tests are correct. How can I tell that there isn't a bug in my unit test? Usually I end up running the app, proving it works, then using the unit test as a sort of regression test. What is the recommended approach and/or what is the approach you take to this problem? Edit: I also realize that you could write small, granular unit tests that would be easy to understand. However, if you assume that small, granular code is flawless and bulletproof, you could just write small, granular programs and not need unit testing. Edit2: For the arguments "unit testing is for making sure your changes don't break anything" and "this will only happen if the test has the exact same flaw as the code", what if the test overfits? It's possible to pass both good and bad code with a bad test. My main question is what good is unit testing since if your tests can be flawed you can't really improve your confidence in your code, can't really prove your refactoring worked, and can't really prove that you met the specification?

  Read the article

• How strict should I be in the "do the simplest thing that could possible work" while doing TDD

  - by Support - multilanguage SO

  For TDD you have to Create a test that fail Do the simplest thing that could possible work to pass the test Add more variants of the test and repeat Refactor when a pattern emerge With this approach you're supposing to cover all the cases ( that comes to my mind at least) but I'm wonder if am I being too strict here and if it is possible to "think ahead" some scenarios instead of simple discover them. For instance, I'm processing a file and if it doesn't conform to a certain format I am to throw an InvalidFormatException So my first test was: @Test void testFormat(){ // empty doesn't do anything... processor.validate("empty.txt"); try { processor.validate("invalid.txt"); assert false: "Should have thrown InvalidFormatException"; } catch( InvalidFormatException ife ) { assert "Invalid format".equals( ife.getMessage() ); } } I run it and it fails because it doesn't throw an exception. So the next thing that comes to my mind is: "Do the simplest thing that could possible work", so I : public void validate( String fileName ) throws InvalidFormatException { if(fileName.equals("invalid.txt") { throw new InvalidFormatException("Invalid format"); } } Doh!! ( although the real code is a bit more complicated, I found my self doing something like this several times ) I know that I have to eventually add another file name and other test that would make this approach impractical and that would force me to refactor to something that makes sense ( which if I understood correctly is the point of TDD, to discover the patterns the usage unveils ) but: Q: am I taking too literal the "Do the simplest thing..." stuff?

  Read the article

• DOM class injection in PHP

  - by Adam Kiss

  idea Via jQuery, I was able to mark all :first-child and :last-child elements in document (well, almost all :)) with class first which could I later style (i.e. first li in ul#navigation would be easily adressable as ul#navigation .first). I used following code: var $f = $('*:first-child') $f.addClass('first'); var $l = $('body *:last-child') $l.addClass('last'); question Now, my question is if it's possible to do the same via php, so non-JS users/gadgets could have the same effects and additional styling and also it would be less overkill on browser. So, is it possible to capture output, parse it as html and inject this class easily in php?

  Read the article

• Mocking non-virtual methods in C++ without editing production code?

  - by wk1989

  Hello, I am a fairly new software developer currently working adding unit tests to an existing C++ project that started years ago. Due to a non-technical reason, I'm not allowed to modify any existing code. The base class of all my modules has a bunch of methods for Setting/Getting data and communicating with other modules. Since I just want to unit testing each individual module, I want to be able to use canned values for all my inter-module communication methods. I.e. for a method Ping() which checks if another module is active, I want to have it return true or false based on what kind of test I'm doing. I've been looking into Google Test and Google Mock, and it does support mocking non-virtual methods. However the approach described (http://code.google.com/p/googlemock/wiki/CookBook#Mocking_Nonvirtual_Methods) requires me to "templatize" the original methods to take in either real or mock objects. I can't go and templatize my methods in the base class due to the requirement mentioned earlier, so I need some other way of mocking these virtual methods Basically, the methods I want to mock are in some base class, the modules I want to unit test and create mocks of are derived classes of that base class. There are intermediate modules in between my base Module class and the modules that I want to test. I would appreciate any advise! Thanks, JW EDIT: A more concrete examples My base class is lets say rootModule, the module I want to test is leafModule. There is an intermediate module which inherits from rootModule, leafModule inherits from this intermediate module. In my leafModule, I want to test the doStuff() method, which calls the non virtual GetStatus(moduleName) defined in the rootModule class. I need to somehow make GetStatus() to return a chosen canned value. Mocking is new to me, so is using mock objects even the right approach?

  Read the article

• Help with this reg. exp. in PHP

  - by Jonathan

  Hi, i don't know about regular expressions, I asked here for one that: gets either anything up to the first parenthesis/colon or the first word inside the first parenthesis. This was the answer: preg_match('/(?:^[^(:]+|(?<=^\\()[^\\s)]+)/', $var, $match); I need an improvement, I need to get either anything up to the first parenthesis/colon/quotation marks or the first word inside the first parenthesis. So if I have something like: $var = 'story "The Town in Hell"s Backyard'; // I get this: $match = 'story'; $var = "screenplay (based on)"; // I get this: $match = 'screenplay'; $var = "(play)"; // I get this: $match = 'play'; $var = "original screen"; // I get this: $match = 'original screen'; Thanks!

  Read the article

• Structure map and generics (in XML config)

  - by James D

  Hi I'm using the latest StructureMap (2.5.4.264), and I need to define some instances in the xml configuration for StructureMap using generics. However I get the following 103 error: Unhandled Exception: StructureMap.Exceptions.StructureMapConfigurationException: StructureMap configuration failures: Error: 103 Source: Requested PluginType MyTest.ITest`1[[MyTest.Test,MyTest]] configured in Xml cannot be found Could not create a Type for 'MyTest.ITest`1[[MyTest.Test,MyTest]]' System.ApplicationException: Could not create a Type for 'MyTest.ITest`1[[MyTest.Test,MyTest]]' ---> System.TypeLoadException: Could not loa d type 'MyTest.ITest`1' from assembly 'StructureMap, Version=2.5.4.264, Culture=neutral, PublicKeyToken=e60ad81abae3c223'. at System.RuntimeTypeHandle._GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, Boolean loadTypeFromPartialName) at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark) at System.RuntimeType.PrivateGetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& s tackMark) at System.Type.GetType(String typeName, Boolean throwOnError) at StructureMap.Graph.TypePath.FindType() --- End of inner exception stack trace --- at StructureMap.Graph.TypePath.FindType() at StructureMap.Configuration.GraphBuilder.ConfigureFamily(TypePath pluginTypePath, Action`1 action) A simply replication of the code is as follows: public interface ITest<T> { } public class Test { } public class Concrete : ITest<Test> { } Which I then wish to define in the XML configuration something as follows: <DefaultInstance PluginType="MyTest.ITest`1[[MyTest.Test,MyTest]],MyTest" PluggedType="MyTest.Concrete,MyTest" Scope="Singleton" /> I've been racking my brain, however I can't see what I'm doing wrong - I've used Type.GetType to verify the type actually is valid which it is. Anyone have any ideas? Thanks !

  Read the article

• Retruning reference to object not changing the address in c++

  - by ashish-sangwan

  I am trying to understand function returning reference. For that i have written a simple program :- include using namespace std; class test { int i; friend test& func(); public: test(int j){i=j;} void show(){cout< }; test& func() { test temp(10); return temp; //// Address of temp=0xbfcb2874 } int main() { test obj1(50); // Address of obj1=0xbfcb28a0 func()=obj1; <= Problem:The address of obj1 is not changing obj1.show(); // // Address of obj1=0xbfcb28a0 return 0; } I run the program using gdb and observed that the address of obj1 still remains same but i expect it to get changed to 0xbfcb2874. I am not clear with the concept. Please help. Thanks in advance

  Read the article

< Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >