Search Results

Search found 10501 results on 421 pages for 'hardware firewall'.

Page 213/421 | < Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >

• How to install missing Sound Drivers in Ubuntu?

  - by Sakamoto Kazuma

  I seem to be missing drivers for my Gateway laptop MA7. I have looked in System-Admin-Hardware Drivers, but it does not show up in there.There are also no devices listed in Sound-Hardware. I'm guessing at this point that I don't have the driver installed. However, I get the following output: admin@machine001:~$ cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xd8240000 irq 22 admin@machine001:~$ And my lspci shows: 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8038 PCI-E Fast Ethernet Controller (rev 14) 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) 04:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 04:09.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller 04:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) I have also checked alsamixer, and nothing is muted. No headphones plugged into headphone jack either. So the question now is, how do I get sound to work on my laptop? It doesn't work for any application.

  Read the article

• Building an SSL server farm

  - by dan

  I'm interested in building the the architecture in the article referenced below. I currently have a modestly-priced layer-4 load balancer and my application servers are the SSL endpoints. I want to put an SSL server farm in between my load balancer and my app servers. Then I will put another inexpensive load balancer between the SSL farm and my app servers, to do layer-7 routing. My web application has a fairly high amount of consumer traffic, that 6 servers can handle at about 50% capacity. Additionally, I have infrastructure traffic that is several orders of magnitude heavier than my consumer traffic. This is data coming in from all over the world that must integrate with my web application in real time. In total I have 18 app servers to handle all the traffic, plus 6 database servers. I will be adding 6 more app servers over the next 2 weeks and another 6 the 2 weeks after that. Conservatively, I estimate I will need to scale to 120 servers by the end of the year. My motivation right now is to separate the consumer traffic from the infrastructure traffic. The consumer traffic is higher priority than the infrastructure traffic and I cannot allow a stampede on the infrastructure side to take down my consumer-facing servers. Having a website that is always up is the top priority. However if there is a failure in one of the consumer app servers, I want to route that traffic to the servers designated for infrastructure traffic. The complication is that all the traffic is addressed using the same hostname and is nearly 100% https. The only way in my case to distinguish infrastructure from consumer traffic is by URL (poor architecture I inherited), so I need a layer 7 load balancer to be able to route. However for that to work I need either a fancy hardware-based SSL terminator or an SSL server farm as described above. Because my user base is rapidly scaling, I worry that if I go down the hardware path it will become very expensive very fast, especially since I will need 4 of everything for high availability (2 identical setups in 2 facilities). Meanwhile, the above diagram seems very flexible and more horizontally scalable. Has anyone built this before? Are there pre-built configurations? What considerations should I make and what software should I use (I've heard of people using apache with mod-ssl, nginx, and stunnel)? Also, when does it make sense to buy an expensive load balancer vs building an SSL server farm? http://1wt.eu/articles/2006_lb/index_05.html

  Read the article

• Detect damage done by virus

  - by user38471

  Hey, this morning after I went to college a virus infected my pc without any user interaction at my end. When I came home my computer was completely frozen and infected with lots of trojans. I have not typed anything important since returning so keys cannot be logged. However I want to know exactly when my computer crashed from the time of infection to see what could potentially be done remotely by a hacker. The virus my pc was diagonosed with was "fakespypro" http://www.microsoft.com/security/portal/Threat/Encyclopedia/Entry.aspx?Name=Win32%2fFakeSpypro on a fully updated windows 7 installation with firewall enabled. My computer was connected to an internal dorm room network, so probably that has had to do something with it. Any further information about how I could backtrace this virus infection or ways to discover what data might be stolen would be greatly appriciated.

  Read the article

• Configuring vsftpd with nginx on ubuntu

  - by arby

  I have vsftpd installed on Ubuntu 12.04LTS along with nginx, php, and sql on an Amazon ec2 instance. The web server is good to go, but I'm having trouble connecting to the FTP server. I'm not quite sure how to set the privileges or what configuration options I might be missing. By default, the location of the web root is at /usr/share/nginx/www and it is owned by root:root. The web server runs as user www-data in the group www-data. I've opened port 21 and set the passive ports in the ec2 backend and ufw firewall. In vsftpd.conf, I have: ... anonymous_enable=NO local_enable=YES local_umask=0027 chroot_local_user=YES pasv_enable=YES pas_max_port=12100 pasv_min_port=12000 port_enable=YES ... Now, I'm unsure how to create the FTP user that when I login, displays my web directory with write access. I've tried it a few different ways, but I keep running into errors (either no connection, no write access, or very slow timeouts.)

  Read the article

• Making internal website available publicly (Win 2008 Server)

  - by endigo

  I have an IIS 7 web site that is running on a Windows 2008 Server (64-bit) VMWare on a Windows 2008 Server (64-bit) Host on my local network. My router is a Firebox XEdge and it has port 80 directed to the IP of the server on VMWare. I can reach the web site from inside the network, but I cannot reach the site from outside the network. I have other web sites that are working through the Firebox, and I am confident that it is configured correctly. I suspect that Windows 2008 server is blocking routed or public addresses, but I have shut down the firewall on the Server that is running on VMWare and the AVG Anti-virus to no avail. How can I make my site available publicly.

  Read the article

• Cannot access https sites through any browser on Win XP?

  - by manwood

  This isnt a firewall issue, I can telnet to gmail with no problems, but all browsers (chrome, IE, firefox) return a This web page is not available. error when tring to access it through the browser. I can access the same pages, using the same browsers, on the same machine, but through a different user account with no problem. What the hell is going on? Help appreciated. Edit: This is definitely a windows setup issue - I have just created a new admin account and can access https with problems. This is seriously infuriating.

  Read the article

• Servers behind load balancer

  - by Tom

  We have a CISCO hardware load balancer with two web servers behind it. We'd like to force some URLs to only be served by one of the machines. Firstly, is the job of the load balancer? or would a better approach be create a subdomain such as http://assets.example.com which would be automatically be routed to one of the servers?

  Read the article

• What are the consequences of Rooting an Android Phone?

  - by Chris Weber

  Will I have any bad consequences if I root my phone (HTC Incredible on Verizon)? Specifically wondering about updates from Verizon, HTC, etc? I'd like to to this to gain full access to the hardware (LED flashlight, etc), because there isn't a good solution (that doesn't require a full reboot of phone afterward).

  Read the article

• Forwarding ports with ssh on Linux

  - by Patrick Klingemann

  I have a database server, let's call it: dbserver I have a web server with access to my dbserver, let's call it: webserver I have a development machine that I'd like to use to access a database on dbserver, let's call it: dev dbserver has a firewall rule set to allow TCP requests from webserver to dbserver:1433 I'd like to set up a tunnel from dev:1433 to dbserver:1433, so all requests to 1433 on dev are passed along to dbserver:1433 My sshd_config on webserver has the following rules set: AllowTcpForwarding yes GatewayPorts yes This is what I've tried: ssh -v -L localhost:1433:dbserver:1433 webserver In another terminal: telnet localhost 1433 Results in: Trying ::1... Connected to localhost. Escape character is '^]'. Connection closed by foreign host. Any idea what I'm doing wrong here? Thanks in advance!

  Read the article

• In TCP/IP terms, how does a download speed limiter in an office work?

  - by TessellatingHeckler

  Assume an office of people, they want to limit HTTP downloads to a max of 40% bandwidth of their internet connection speed so that it doesn't block other traffic. We say "it's not supported in your firewall", and they say the inevitable line "we used to be able to do it with our Netgear/DLink/DrayTek". Thinking about it, a download is like this: HTTP GET request Server sends file data as TCP packets Client acknowledges receipt of TCP packets Repeat until download finished. The speed is determined by how fast the server sends data to you, and how fast you acknowledge it. So, to limit download speed, you have two choices: 1) Instruct the server to send data to you more slowly - and I don't think there's any protocol feature to request that in TCP or HTTP. 2) Acknowledge packets more slowly by limiting your upload speed, and also ruin your upload speed. How do devices do this limiting? Is there a standard way?

  Read the article

• IP assignment in a /28 block

  - by mks

  Need help on setting up firewall router. My config is as below: Public static network ID: x.x.x.48/28 gateway: x.x.x.49 available IP for the hosts: x.x.x.52 to 62 gw_eth0 <-- fw_eth0 - fw_eth1 <-- dmz_switch Four servers are connected on dmz_switch (say s1, s2, s3, s4) all have to use public static IP address from the above block. Any recommendation on IP assignment and route setup? Do I need to subnet the above block further or simply use /32 netmask and point-to-point static routes in the above setup?

  Read the article

• Domain Computers Not Listed In Network

  - by Giawa

  Our network computers are all connected to a domain, and I can see them if I search the active directory (I can click 'search active directory' and then select 'computers' and then Find Now, and all of the computers will appear). However, the computers are not listed in the network browser on any of our computers (Win XP, Win7, Linux, etc) which are connected to the domain. DC is running Windows Server 2008 (Windows Server Standard) with a configured DNS and DHCP server. All of the IPs on our local network are static IPs, although I can't see how that would make a difference. I can still connect to computers on the network via \\computer_name, but I cannot browse them in 'network' or in 'my network places'. The computer browser service is not started on the DC, but I tried starting that and it had no effect. DC currently has the firewall configured as 'off' to try to debug this problem. Thanks in advance

  Read the article

• How do I disable administrator prompt in Windows 8?

  - by Arnold Zokas

  I am using Windows 8 Enterprise on my development machine. Most of the time, I need full administrator for debugging, changing system files, etc. In Windows 7, setting UAC to "never notify" would disable any administrator prompts. In Windows 8 this is no longer the case. Even with UAC disabled I get prompted to grant programs elevated privileges. Is there a way disable this behaviour? Note: I am fully aware of the repercussions. I have antivirus, firewall, etc and am generally quite careful about what I download or install on my machine.

  Read the article

• p2v v2v v2p tool from open source?

  - by neolix

  we have centos, fedora, ubuntu server and desktop we are looking for good open source tool for p2v v2v v2p and we are not using vmware here only we use xen or kvm. Same of the server shifted to new hardware and same of the server on xen or kvm. Can same help me !!

  Read the article

• My D-Link's Ethernet bridge downlink just got 10-30x slower?

  - by Jay Levitt

  TL;DR: I unplugged my network to move my desk, and now downloading via my DIR-655's Ethernet LAN bridge is 10-30x slower than the Ethernet switch it's plugged into. Background My network is SMC cable modem <-> Cisco firewall <-> Netgear switch <-> D-Link WiFi† | | | | SMC8014 ASA-5505 GS608v2 gigE DIR-655 rev A3 gigE †The DIR-655 is used as an access point, not a router (although what D-Link calls an access point, I'd call a bridge). The "WAN" port is unused; the Netgear connects to the built-in 4-port Ethernet LAN switch, inside the built- in router/firewall. Endpoints: MacBook Pro 17" mid-2010 iPhone 4S Fedora 12 Linux server running reasonably fast dual-Athlon X2, VelociRaptors, etc. All cables are <10 feet, mostly CAT-5e, some CAT-6, all premade. All WiFi endpoints are within three feet of the D-Link. Yesterday I unplugged and rearranged stuff, and now connecting via the D-Link - even through the wired switch, right next to the incoming network cable - is 30x slower than connecting directly to the Netgear switch, on both my MacBook and iPhone. How I'm measuring "slower" I'm mostly using http://speedtest.net, which of course only really measures broadband speeds. I've also installed http://www.speedtest.net/mini.php on my local server, but can't test the iPhone with that. Results Speedtest.net, closest server over Comcast business-class: CONFIG | PING (ms) | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> Netgear | 9 | 31.6 | 6.8 Mac <-> Ethernet <-> D-Link | 8 | 4.1 | 6.0 Mac <-> WiFi <-> D-Link | 9 | 1.4 | 2.9 iPhone <-> WiFi <-> D-Link | 67 | 0.4 | 1.6 Speedtest Mini on Linux PC: CONFIG | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> NetGear | 97.2 | 76.9 Mac <-> Ethernet <-> D-Link | 8.2 | 24.2 Mac <-> WiFi <-> D-Link | 1.0 | 8.6 Slow typing in SSH: Mac <-> Ethernet <-> Netgear <-> Linux PC: smooth Mac <-> Ethernet <-> D-Link <-> Linux PC: choppy Note that D-Link upload speeds are normal on broadband, slower locally (but I'd believe that's a D-Link limitation), and always faster than the downloads! Since ssh is choppy just with slow typing, I don't believe it's a throttling-type problem either; that's not a lot of bandwidth. What I've tried Swapping all "good" and "bad" cables Re-plugging "bad" cable from D-Link to Netgear and watching it be the "good" cable pulling cables away from power lines Verify that the Mac auto-detects the D-Link as gigE Try to verify the link speed of the D-Link <- Netgear connection, but the firmware doesn't report that Verify that the D-Link sees no TX/RX errors or collisions Use different Ethernet ports on both Netgear and D-Link Reset the D-Link to factory settings Upgrade the D-Link firmware from 1.21 to 1.35NA, 2010/11/12, the latest Reboot everything at least once On the Mac, disable Wi-Fi during the Ethernet tests, and unplug Ethernet during the Wi-Fi tests Using iStumbler, verify that the D-Link isn't picking overloaded Wi-Fi channels (usually just 1-5 neighbors on my and adjacent channels, average for my apt building) Verify that the only client connected to the Wi-Fi was the iPhone Verify that nothing was being chatty on my network according to the WISH log Enable and disable all sorts of D-Link settings, including forcing WAN auto-detect to gigE So. I don't mind buying a new access point—I wouldn't mind having a dual-link network—but as a guy who's been networking since gated v4 was a drastic rewrite, and who often used physical sniffers in the days before Wireshark, I'm baffled. I hate being baffled. What could I possibly have changed that would result in this? How can I measure it? All I can think of is a static zap—thick carpet, socks, HVAC—but I didn't feel one, and does that really happen anymore? Can I test if it's Ethernet vs. TCP layer slowness? I'm not familiar with modern network utilities; it's hard to Google without hitting "Q: Why is my network slow? A: Is your microwave on?" If I don't get an answer here, will someone big and powerful help me migrate it to serverfault without getting screamed back here? In the words of Inigo Montoya, "I must know." Don't get all Dread Pirate Roberts on me.

  Read the article

• IIS cannot access itself

  - by dave

  We are on a corporate network that uses ISA and I am having issues trying to not have requests go through ISA. I have IIS7 on my local Windows 7 machine that has websites and a service layer. The websites access the service layer using a xxxx.servicelayer.local address that is set up in my HOSTS file to point to 127.0.0.1. I have Windows Firewall client which I have disabled. I have tried both adding this address into IE so that it does not go through ISA and also disabled this section altogether. When the website (which is actually IIS making the request to itself) tries to access the service layer I receive an ISA error that proxy authentication has failed. Considering that everything I can see to configure is set to not go through the proxy, ISA, I cannot see how this is actually going through the proxy and giving this error. Is there something within Windows 7 that forces the proxy setting, some sort of caching or similar?

  Read the article

• Rack layout tools

  - by Luke

  I'm wondering if there's any tools (preferably offline) that would allow me to layout all of the new equipment that will be going into several standard racks. Currently I'm using Excel to map out all of the slots columns for the data but I suspect that there is some better method of doing this. Suggestions? Edit: Dell has an online tool, but doesn't seem very good at actually saving the data that you're working on (and obviously it's geared towards Dell hardware).

  Read the article

• SHH Tunnel for Remote Desktop via Intermediary Server

  - by Mihai Todor

  I've seen many examples of SSH tunnels on the nets, but I'm still having no luck with this. Here's the setup: Windows 7 PC in a private network, sitting behind a firewall, with PowerShellInsider SSH server set up and working fine. Public access Linux server, which has access to the PC. Windows 7 laptop, at home, from which I wish to do remote desktop on the PC. Now, here's what I've tried so far: SSH tunnel from my laptop to the Linux server: ssh -f my_user@LINUX_SERVER -L 6666:LINUX_SERVER_IP:6666 -N SSH to the Linux server where I've set up a tunnel to the PC: ssh -f 'PRIVATE_DOMAIN\my_user'@PC_NAME -L 6666:PC_IP:3389 -N Unfortunately, I must be doing something wrong, because it doesn't seem to work. Any ideas why or, at least, any suggestions on how can I try to debug this setup? At the moment, I have access to all 3 machines (non-root on Linux), so I can test whatever I want...

  Read the article

• How do I diagnose Windows XP failure to automatically suspend on idle?

  - by Software Monkey

  Since upgrading my hardware (mobo, CPU and memory) a couple months ago my computer no longer automatically suspends and hibernates after the configured idle periods. Both functions work just fine manually, but if I leave the computer on overnight it's still active the next morning even though it's configured to sleep after 3 hours and hibernate after 6 hours. How do I diagnose the cause of this?

  Read the article

• Unable to connect my computer from LAN (http, smb) in UBUNTU 10.04

  - by Abdul Majeed

  I installed ubuntu 10.04, Apache, PHP, mysql, smb. Everything work fine in locally in my IP. When i trying to access my computer from LAN (other computer), it shows unable to connect. when i ping my IP from remote computer, its pinging OK. I can access internet, and all other systems (http, smb). But the problem is no one can't access my computer remotely in my LAN network. My ip is 192.168.85.105 and i want access(Appaceh,SMB) from 192.168.85.10. Is there any proxy firewall settings? I had tried following commands.. sudo iptables -F or sudo iptables-restore [logout require] If it does not work then try to disable net-filter sudo ufw --disable Please give me the solution.

  Read the article

• Dell E6400 Display issue - "doubling up" intermittently

  - by alex

  I've got a Dell E6400 It's suddenly developed an intermittent fault with the display Every now and again, it seems to boot up with "double vision" By that I mean, its split horizontally, with each half showing the same thing, but with low resolution, and looks grainy - if that makes sense (I will try to get a couple of pictures if I can) I haven't changed any hardware or anything. I have re-built windows, to see if that fixed the problem, it didn't. I've upgraded the BIOS to see if that would help, still same problem. I'm out of ideas :-(

  Read the article

• Public DNS Server fails on Windows Amazon EC2

  - by Adroidist

  I have started a new Windows server instance on Amazon EC2. The security group has the following rules: Ports Protocol Source 22 tcp 0.0.0.0/0 80 tcp 0.0.0.0/0 443 tcp 0.0.0.0/0 3389 tcp 0.0.0.0/0 53 udp 0.0.0.0/0 -1 icmp 0.0.0.0/0 I am able to ping the public DNS server of the machine and i can connect to it using Windows Remote Desktop connection. However, when i put in my web browser the public DNS server, it fails to connect. Morever, I used filezilla and putty (and in both I loaded the private key .pem) but i receive connection timed out. I disabled the firewall on both my pc and the instance (which I entered using Remote desktop connection). Can you please tell me what I am missing?

  Read the article

• What Are Some Good Open Source Alternatives to Active Directory?

  - by Laz

  I'm looking for a good open-source alternative to active directory that can handle: Authorization/Authentication Group Policy Replication and Trust Monitoring In addition, are there any consolidated systems out there that handle these responsibilities? Edit: Since a lot have asked for more details, I am trying to offer a service setting up an infrastructure for organizations, hardware/software setups, right now I am looking at a Linux stack, both desktops and servers, however a hybrid stack is possible, and I am investigating alternatives.

  Read the article

• Is there a way to suppress keyboard sounds picked up by a desktop microphone in Windows 7?

  - by Dave Andersen

  The problem I'd like to solve is that my desktop microphone picks up all my keystrokes very loudly compared with my voice. Even just lightly tapping a key without depressing it causes a loud click to be picked up. I'd like a way to filter out this type of sound, while picking up voice normally. Is there any software input equalizer/filter that could do this? Or alternatively, some sort of hardware hack?

  Read the article

• Accessing Windows 7 Printer from Ubuntu Linux via LPR/LPD or Samba

  - by nitbuntu

  Hi, I'm having difficulty printing from my Linux (Ubuntu 10.04) based PC to a printer connected to a Windows 7 machine. I was trying to connect using Samba (version 3.5.6) but this always brings up an authentication screen which never accepts any password I use. So I read somewhere that an alternative is to access the Windows printer via LPR/LPD. I added an LPR/LPD printer in Windows 7, but even within Windows 7, I am not able to print as the print que monitor shows as 'printer busy'. The printer in question is an Epson Stylus DX7400 and works fine when using the standard USB ports....but doesn't when I use with the LPR/LPD ports. I even opened up the TCP/IP port 515 in my McAfee firewall without any success. Any help with this would be highly appreciated. Additionally, does anyone have any idea how I can get Samba working for me?

  Read the article

< Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >