ip port - Page 213 - Developer IT

Dns caching for sockets

- by Poma

I'm connecting to some websites through socks proxy server. In my case its very good to implement dns cache, so proxy don't need to resolve website's ip address. So, I performed DNS lookup, but don't know where to supply IP address. mySocket.Connect uses proxy's ip address so it isn't right place. I tried to place it in http header GET http://11.22.33.44/index.html HTTP/1.1 - this doesn't work (even in browser) since website is on virtual hosting. It seems that Host header is right place for resolved ip address. Am I right? Will proxy resolve host name (since it's still there in GET header) or not?

Read the article

redirecting domain to nameservers in heroku?

- by user163352

i have configured my domain to heroku ip's 75.101.163.44 75.101.145.87 174.129.212.2 But its not redirecting my app to domain..error says There is no app configured at that hostname. Perhaps the app owner has renamed it, or you mistyped the URL. did each heroku app has unique ip address.if so how to get the unique ip and how to redirect it to domain.. thanks..

Read the article

Sockets, Threads and Services in android, how to make them work together ?

- by Spredzy

Hi all, I am facing a probleme with threads and sockets I cant figure it out, if someone can help me please i would really appreciate. There are the facts : I have a service class NetworkService, inside this class I have a Socket attribute. I would like it be at the state of connected for the whole lifecycle of the service. To connect the socket I do it in a thread, so if the server has to timeout, it would not block my UI thread. Problem is, into the thread where I connect my socket everything is fine, it is connected and I can talk to my server, once this thread is over and I try to reuse the socket, in another thread, I have the error message Socket is not connected. Questions are : - Is the socket automatically disconnected at the end of the thread? - Is their anyway we can pass back a value from a called thread to the caller ? Thanks a lot, Here is my code public class NetworkService extends Service { private Socket mSocket = new Socket(); private void _connectSocket(String addr, int port) { Runnable connect = new connectSocket(this.mSocket, addr, port); new Thread(connect).start(); } private void _authentification() { Runnable auth = new authentification(); new Thread(auth).start(); } private INetwork.Stub mBinder = new INetwork.Stub() { @Override public int doConnect(String addr, int port) throws RemoteException { _connectSocket(addr, port); _authentification(); return 0; } }; class connectSocket implements Runnable { String addrSocket; int portSocket; int TIMEOUT=5000; public connectSocket(String addr, int port) { addrSocket = addr; portSocket = port; } @Override public void run() { SocketAddress socketAddress = new InetSocketAddress(addrSocket, portSocket); try { mSocket.connect(socketAddress, TIMEOUT); PrintWriter out = new PrintWriter(mSocket.getOutputStream(), true); out.println("test42"); Log.i("connectSocket()", "Connection Succesful"); } catch (IOException e) { Log.e("connectSocket()", e.getMessage()); e.printStackTrace(); } } } class authentification implements Runnable { private String constructFirstConnectQuery() { String query = "toto"; return query; } @Override public void run() { BufferedReader in; PrintWriter out; String line = ""; try { in = new BufferedReader(new InputStreamReader(mSocket.getInputStream())); out = new PrintWriter(mSocket.getOutputStream(), true); out.println(constructFirstConnectQuery()); while (mSocket.isConnected()) { line = in.readLine(); Log.e("LINE", "[Current]- " + line); } } catch (IOException e) {e.printStackTrace();} } }

Read the article

nginx error: (99: Cannot assign requested address)

- by k-g-f

I am running Ubuntu Hardy 8.04 and nginx 0.7.65, and when I try starting my nginx server: $ sudo /etc/init.d/nginx start I get the following error: Starting nginx: [emerg]: bind() to IP failed (99: Cannot assign requested address) where "IP" is a placeholder for my IP address. Does anybody know why that error might be happening? This is running on EC2. My nginx.conf file looks like this: user www-data www-data; worker_processes 4; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; access_log /usr/local/nginx/logs/access.log; sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 3; gzip on; gzip_comp_level 2; gzip_proxied any; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; include /usr/local/nginx/sites-enabled/*; } and my /usr/local/nginx/sites-enabled/example.com looks like: server { listen IP:80; server_name example.com; rewrite ^/(.*) https://example.com/$1 permanent; } server { listen IP:443 default ssl; ssl on; ssl_certificate /etc/ssl/certs/myssl.crt; ssl_certificate_key /etc/ssl/private/myssl.key; ssl_protocols SSLv3 TLSv1; ssl_ciphers ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:-LOW:-SSLv2:-EXP; server_name example.com; access_log /home/example/example.com/log/access.log; error_log /home/example/example.com/log/error.log; }

Read the article

Need help configurating my Tomcat server

- by gablin

I just reinstalled my entire server, and now I can't seem to get my JSP-based website to work on Tomcat anymore. I use the same server.xml file, which worked perfectly before the reinstallation, but no longer. Here's the content of the server.xml file which worked before:  <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />  <Listener className="org.apache.catalina.core.JasperListener" />  <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />  <GlobalNamingResources>  <Resource name="UserDatabase" auth="Container" type="org.apache.catalina.UserDatabase" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" pathname="conf/tomcat-users.xml" /> </GlobalNamingResources>  <Service name="Catalina">    <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" />      <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />   <Engine name="Catalina" defaultHost="localhost">      <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/>        <Host name="www.rebootradio.nu"> <Alias>rebootradio.nu</Alias> <Context path="" docBase="D:/services/http/rebootradio.nu" debug="1" reloadable="true"/> </Host> </Engine> </Service> </Server> The JSP site doesn't use any WAR files or anything like that; there's just a default.jsp in the specified folder D:/services/http/rebootradio.nu which loads the site. As I said, this configuration worked before, but now with the latest verion of XAMPP and Tomcat it doesn't work anymore. All I get is a 404 message saying The requested resource () is not available.

Read the article

How to flush DNS cache in Windows Mobile programmatically?

- by Bounded

Hello, My windows mobile application (written in C# with the compact framework) needs to know if a particular machine is active or not. To achieve this goal, I thought to use a ping mechanism. I tried to use the Ping class implemented in the opennetcf framework (the System.Net.NetworkInformation.Ping class for the .NET Framework is not part of the compact framework). Because I give to the Ping.Send function a host name, it first tries to resolve this host name and to retrieve an IP address. But i observe the following problem : If the first dns resolution fails (because the network is down at this moment), and if the application tries immediately again to send the ping, it fails too, even if the network is note down anymore. I check with a famous network protocol analyzer and i saw that only the requests concerning the first dns resolution are sent. The requests concerning the dns resolution of the second ping are not sent. Why is the second dns request not sent ? Is there any dns cache mechanism on such Windows Mobile devices ? If yes, can this mechanism beeing flushed programmatically ? EDIT : I gave up finding a solution to this DNS flush. I chose to ping an IP adress instead of a name machine. The problem of pinging an hard coded adress IP is that we have to be 100% sure that this IP will not change. The gateway IP can be used because it's always reachable (if it does not, it means the network is down).

Read the article

Setting variables in shell script by running commands

- by rajya vardhan

>cat /tmp/list1 john jack >cat /tmp/list2 smith taylor It is guaranteed that list1 and list2 will have equal number of lines. f(){ i=1 while read line do var1 = `sed -n '$ip' /tmp/list1` var2 = `sed -n '$ip' /tmp/list2` echo $i,$var1,$var2 i=`expr $i+1` echo $i,$var1,$var2 done < $INFILE } So output of f() should be: 1,john,smith 2,jack,taylor But getting 1,p,p 1+1,p,p If i replace following: var1 = `sed -n '$ip' /tmp/list1` var2 = `sed -n '$ip' /tmp/list2` with this: var1=`head -$i /tmp/vip_list|tail -1` var2=`head -$i /tmp/lb_list|tail -1` Then output: 1,john,smith 1,john,smith Not an expert of shell, so please excuse if sounds childish :)

Read the article

CORBA Naming Service returns incorrect location of a registered object

- by dave-keiture

Hi experts, I have a simple setup with several objects registered at orbd. Remote client initializes connection to the ORB and tries to resolve a reference to the Naming Serice (IDL:omg.org/CosNaming/NamingContextExt:1.0). So far it's all fine - ORB returns giop.iiop.host/giop.iiop.port pair. When reference to the Naming Service is resolved, client tries to resolve_str() one of the registered objects. This time, Naming Service returns completely different pair giop.iiop.host/giop.iiop.port for the object (not the host/port of a Naming Service) - I don't know anything about them. When client tries to call a method on a resolved object, it fails, as the host/port pair is not configured in the firewall. Could you please explain, why it's happening? Thanks in advance!

Read the article

Given a trace of packets, how would you group them into flows?

- by zxcvbnm

I've tried it these ways so far: 1) Make a hash with the source IP/port and destination IP/port as keys. Each position in the hash is a list of packets. The hash is then saved in a file, with each flow separated by some special characters/line. Problem: Not enough memory for large traces. 2) Make a hash with the same key as above, but only keep in memory the file handles. Each packet is then put into the hash[key] that points to the right file. Problems: Too many flows/files (~200k) and it might run out of memory as well. 3) Hash the source IP/port and destination IP/port, then put the info inside a file. The difference between 2 and 3 is that here the files are opened and closed for each operation, so I don't have to worry about running out of memory because I opened too many at the same time. Problems: WAY too slow, same number of files as 2 so also impractical. 4) Make a hash of the source IP/port pairs and then iterate over the whole trace for each flow. Take the packets that are part of that flow and place them into the output file. Problem: Suppose I have a 60 MB trace that has 200k flows. This way, I would process, say, a 60 MB file 200k times. Maybe removing the packets as I iterate would make it not so painful, but so far I'm not sure this would be a good solution. 5) Split them by IP source/destination and then create a single file for each one, separating the flows by special characters. Still too many files (+50k). Right now I'm using Ruby to do it, which might've been a bad idea, I guess. Currently I've filtered the traces with tshark so that they only have relevant info, so I can't really make them any smaller. I thought about loading everything in memory as described in 1) using C#/Java/C++, but I was wondering if there wouldn't be a better approach here, especially since I might also run out of memory later on even with a more efficient language if I have to use larger traces. In summary, the problem I'm facing is that I either have too many files or that I run out of memory. I've also tried searching for some tool to filter the info, but I don't think there is one. The ones I've found only return some statistics and wouldn't scan for every flow as I need.

Read the article

undefined reference to function, despite giving reference in c

- by Jamie Edwards

I'm following a tutorial, but when it comes to compiling and linking the code I get the following error: /tmp/cc8gRrVZ.o: In function `main': main.c:(.text+0xa): undefined reference to `monitor_clear' main.c:(.text+0x16): undefined reference to `monitor_write' collect2: ld returned 1 exit status make: *** [obj/main.o] Error 1 What that is telling me is that I haven't defined both 'monitor_clear' and 'monitor_write'. But I have, in both the header and source files. They are as follows: monitor.c: // monitor.c -- Defines functions for writing to the monitor. // heavily based on Bran's kernel development tutorials, // but rewritten for JamesM's kernel tutorials. #include "monitor.h" // The VGA framebuffer starts at 0xB8000. u16int *video_memory = (u16int *)0xB8000; // Stores the cursor position. u8int cursor_x = 0; u8int cursor_y = 0; // Updates the hardware cursor. static void move_cursor() { // The screen is 80 characters wide... u16int cursorLocation = cursor_y * 80 + cursor_x; outb(0x3D4, 14); // Tell the VGA board we are setting the high cursor byte. outb(0x3D5, cursorLocation >> 8); // Send the high cursor byte. outb(0x3D4, 15); // Tell the VGA board we are setting the low cursor byte. outb(0x3D5, cursorLocation); // Send the low cursor byte. } // Scrolls the text on the screen up by one line. static void scroll() { // Get a space character with the default colour attributes. u8int attributeByte = (0 /*black*/ << 4) | (15 /*white*/ & 0x0F); u16int blank = 0x20 /* space */ | (attributeByte << 8); // Row 25 is the end, this means we need to scroll up if(cursor_y >= 25) { // Move the current text chunk that makes up the screen // back in the buffer by a line int i; for (i = 0*80; i < 24*80; i++) { video_memory[i] = video_memory[i+80]; } // The last line should now be blank. Do this by writing // 80 spaces to it. for (i = 24*80; i < 25*80; i++) { video_memory[i] = blank; } // The cursor should now be on the last line. cursor_y = 24; } } // Writes a single character out to the screen. void monitor_put(char c) { // The background colour is black (0), the foreground is white (15). u8int backColour = 0; u8int foreColour = 15; // The attribute byte is made up of two nibbles - the lower being the // foreground colour, and the upper the background colour. u8int attributeByte = (backColour << 4) | (foreColour & 0x0F); // The attribute byte is the top 8 bits of the word we have to send to the // VGA board. u16int attribute = attributeByte << 8; u16int *location; // Handle a backspace, by moving the cursor back one space if (c == 0x08 && cursor_x) { cursor_x--; } // Handle a tab by increasing the cursor's X, but only to a point // where it is divisible by 8. else if (c == 0x09) { cursor_x = (cursor_x+8) & ~(8-1); } // Handle carriage return else if (c == '\r') { cursor_x = 0; } // Handle newline by moving cursor back to left and increasing the row else if (c == '\n') { cursor_x = 0; cursor_y++; } // Handle any other printable character. else if(c >= ' ') { location = video_memory + (cursor_y*80 + cursor_x); *location = c | attribute; cursor_x++; } // Check if we need to insert a new line because we have reached the end // of the screen. if (cursor_x >= 80) { cursor_x = 0; cursor_y ++; } // Scroll the screen if needed. scroll(); // Move the hardware cursor. move_cursor(); } // Clears the screen, by copying lots of spaces to the framebuffer. void monitor_clear() { // Make an attribute byte for the default colours u8int attributeByte = (0 /*black*/ << 4) | (15 /*white*/ & 0x0F); u16int blank = 0x20 /* space */ | (attributeByte << 8); int i; for (i = 0; i < 80*25; i++) { video_memory[i] = blank; } // Move the hardware cursor back to the start. cursor_x = 0; cursor_y = 0; move_cursor(); } // Outputs a null-terminated ASCII string to the monitor. void monitor_write(char *c) { int i = 0; while (c[i]) { monitor_put(c[i++]); } } void monitor_write_hex(u32int n) { s32int tmp; monitor_write("0x"); char noZeroes = 1; int i; for (i = 28; i > 0; i -= 4) { tmp = (n >> i) & 0xF; if (tmp == 0 && noZeroes != 0) { continue; } if (tmp >= 0xA) { noZeroes = 0; monitor_put (tmp-0xA+'a' ); } else { noZeroes = 0; monitor_put( tmp+'0' ); } } tmp = n & 0xF; if (tmp >= 0xA) { monitor_put (tmp-0xA+'a'); } else { monitor_put (tmp+'0'); } } void monitor_write_dec(u32int n) { if (n == 0) { monitor_put('0'); return; } s32int acc = n; char c[32]; int i = 0; while (acc > 0) { c[i] = '0' + acc%10; acc /= 10; i++; } c[i] = 0; char c2[32]; c2[i--] = 0; int j = 0; while(i >= 0) { c2[i--] = c[j++]; } monitor_write(c2); } monitor.h: // monitor.h -- Defines the interface for monitor.h // From JamesM's kernel development tutorials. #ifndef MONITOR_H #define MONITOR_H #include "common.h" // Write a single character out to the screen. void monitor_put(char c); // Clear the screen to all black. void monitor_clear(); // Output a null-terminated ASCII string to the monitor. void monitor_write(char *c); #endif // MONITOR_H common.c: // common.c -- Defines some global functions. // From JamesM's kernel development tutorials. #include "common.h" // Write a byte out to the specified port. void outb ( u16int port, u8int value ) { asm volatile ( "outb %1, %0" : : "dN" ( port ), "a" ( value ) ); } u8int inb ( u16int port ) { u8int ret; asm volatile ( "inb %1, %0" : "=a" ( ret ) : "dN" ( port ) ); return ret; } u16int inw ( u16int port ) { u16int ret; asm volatile ( "inw %1, %0" : "=a" ( ret ) : "dN" ( port ) ); return ret; } // Copy len bytes from src to dest. void memcpy(u8int *dest, const u8int *src, u32int len) { const u8int *sp = ( const u8int * ) src; u8int *dp = ( u8int * ) dest; for ( ; len != 0; len-- ) *dp++ =*sp++; } // Write len copies of val into dest. void memset(u8int *dest, u8int val, u32int len) { u8int *temp = ( u8int * ) dest; for ( ; len != 0; len-- ) *temp++ = val; } // Compare two strings. Should return -1 if // str1 < str2, 0 if they are equal or 1 otherwise. int strcmp(char *str1, char *str2) { int i = 0; int failed = 0; while ( str1[i] != '\0' && str2[i] != '\0' ) { if ( str1[i] != str2[i] ) { failed = 1; break; } i++; } // Why did the loop exit? if ( ( str1[i] == '\0' && str2[i] != '\0' || (str1[i] != '\0' && str2[i] =='\0' ) ) failed =1; return failed; } // Copy the NULL-terminated string src into dest, and // return dest. char *strcpy(char *dest, const char *src) { do { *dest++ = *src++; } while ( *src != 0 ); } // Concatenate the NULL-terminated string src onto // the end of dest, and return dest. char *strcat(char *dest, const char *src) { while ( *dest != 0 ) { *dest = *dest++; } do { *dest++ = *src++; } while ( *src != 0 ); return dest; } common.h: // common.h -- Defines typedefs and some global functions. // From JamesM's kernel development tutorials. #ifndef COMMON_H #define COMMON_H // Some nice typedefs, to standardise sizes across platforms. // These typedefs are written for 32-bit x86. typedef unsigned int u32int; typedef int s32int; typedef unsigned short u16int; typedef short s16int; typedef unsigned char u8int; typedef char s8int; void outb ( u16int port, u8int value ); u8int inb ( u16int port ); u16int inw ( u16int port ); #endif //COMMON_H main.c: // main.c -- Defines the C-code kernel entry point, calls initialisation routines. // Made for JamesM's tutorials <www.jamesmolloy.co.uk> #include "monitor.h" int main(struct multiboot *mboot_ptr) { monitor_clear(); monitor_write ( "hello, world!" ); return 0; } here is my makefile: C_SOURCES= main.c monitor.c common.c S_SOURCES= boot.s C_OBJECTS=$(patsubst %.c, obj/%.o, $(C_SOURCES)) S_OBJECTS=$(patsubst %.s, obj/%.o, $(S_SOURCES)) CFLAGS=-nostdlib -nostdinc -fno-builtin -fno-stack-protector -m32 -Iheaders LDFLAGS=-Tlink.ld -melf_i386 --oformat=elf32-i386 ASFLAGS=-felf all: kern/kernel .PHONY: clean clean: -rm -f kern/kernel kern/kernel: $(S_OBJECTS) $(C_OBJECTS) ld $(LDFLAGS) -o $@ $^ $(C_OBJECTS): obj/%.o : %.c gcc $(CFLAGS) $< -o $@ vpath %.c source $(S_OBJECTS): obj/%.o : %.s nasm $(ASFLAGS) $< -o $@ vpath %.s asem Hopefully this will help you understand what is going wrong and how to fix it :L Thanks in advance. Jamie.

Read the article

Malware - Technical anlaysis

- by nullptr

Note: Please do not mod down or close. Im not a stupid PC user asking to fix my pc problem. I am intrigued and am having a deep technical look at whats going on. I have come across a Windows XP machine that is sending unwanted p2p traffic. I have done a 'netstat -b' command and explorer.exe is sending out the traffic. When I kill this process the traffic stops and obviously Windows Explorer dies. Here is the header of the stream from the Wireshark dump (x.x.x.x) is the machines IP. GNUTELLA CONNECT/0.6 Listen-IP: x.x.x.x:8059 Remote-IP: 76.164.224.103 User-Agent: LimeWire/5.3.6 X-Requeries: false X-Ultrapeer: True X-Degree: 32 X-Query-Routing: 0.1 X-Ultrapeer-Query-Routing: 0.1 X-Max-TTL: 3 X-Dynamic-Querying: 0.1 X-Locale-Pref: en GGEP: 0.5 Bye-Packet: 0.1 GNUTELLA/0.6 200 OK Pong-Caching: 0.1 X-Ultrapeer-Needed: false Accept-Encoding: deflate X-Requeries: false X-Locale-Pref: en X-Guess: 0.1 X-Max-TTL: 3 Vendor-Message: 0.2 X-Ultrapeer-Query-Routing: 0.1 X-Query-Routing: 0.1 Listen-IP: 76.164.224.103:15649 X-Ext-Probes: 0.1 Remote-IP: x.x.x.x GGEP: 0.5 X-Dynamic-Querying: 0.1 X-Degree: 32 User-Agent: LimeWire/4.18.7 X-Ultrapeer: True X-Try-Ultrapeers: 121.54.32.36:3279,173.19.233.80:3714,65.182.97.15:5807,115.147.231.81:9751,72.134.30.181:15810,71.59.97.180:24295,74.76.84.250:25497,96.234.62.221:32344,69.44.246.38:42254,98.199.75.23:51230 GNUTELLA/0.6 200 OK So it seems that the malware has hooked into explorer.exe and hidden its self quite well as a Norton Scan doesn't pick anything up. I have looked in Windows firewall and it shouldn't be letting this traffic through. I have had a look into the messages explorer.exe is sending in Spy++ and the only related ones I can see are socket connections etc... My question is what can I do to look into this deeper? What does malware achieve by sending p2p traffic? I know to fix the problem the easiest way is to reinstall Windows but I want to get to the bottom of it first, just out of interest.

Read the article

Decrypting data from a secure socket

- by Ronald

I'm working on a server application in Java. I've successfully got past the handshake portion of the communication process, but how do I go about decrypting my input stream? Here is how I set up my server: import java.io.IOException; import java.net.ServerSocket; import java.net.Socket; import java.util.ArrayList; import java.util.HashMap; import javax.net.ServerSocketFactory; import javax.net.ssl.SSLServerSocket; import javax.net.ssl.SSLServerSocketFactory; import org.json.me.JSONException; import dictionary.Dictionary; public class Server { private static int port = 1234; public static void main(String[] args) throws JSONException { System.setProperty("javax.net.ssl.keyStore", "src/my.keystore"); System.setProperty("javax.net.ssl.keyStorePassword", "test123"); System.out.println("Starting server on port: " + port); HashMap<String, Game> games = new HashMap<String, Game>(); final String[] enabledCipherSuites = { "SSL_RSA_WITH_RC4_128_SHA" }; try{ SSLServerSocketFactory socketFactory = (SSLServerSocketFactory) SSLServerSocketFactory.getDefault(); SSLServerSocket listener = (SSLServerSocket) socketFactory.createServerSocket(port); listener.setEnabledCipherSuites(enabledCipherSuites); Socket server; Dictionary dict = new Dictionary(); Game game = new Game(dict); //for testing, creates 1 global game. while(true){ server = listener.accept(); ClientConnection conn = new ClientConnection(server, game, "User"); Thread t = new Thread(conn); t.start(); } } catch(IOException e){ System.out.println("Failed setting up on port: " + port); e.printStackTrace(); } } } I used a BufferedReader to get the data send from the client: BufferedReader d = new BufferedReader(new InputStreamReader(socket.getInputStream())); After the handshake is complete it appears like I'm getting encrypted data. I did some research online and it seems like I might need to use a Cipher, but I'm not sure. Any ideas?

Read the article

slow DNS resolution

- by Ehsan

I have a DNS server that resolves all queries for an internal group of servers. It is a bind on CentOS 5.5 (same as RHEL5) and I have set it up to allow recursion and resolve direction without any forwarders. The problem I am facing is that it takes a freakishly long amount of time to resolve a name for the first time. (in the magnitudes of 20 sec) This causes clients to give timeout. When I set it to forward all to Google's public DNS, i.e. 8.8.8.8+8.8.4.4, it works very nicely (within a second). I tried monitoring the traffic on the net to see why it is doing this: [root@ns1 ~]# tcpdump -nnvvvA -s0 udp tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 23:06:36.137797 IP (tos 0x0, ttl 64, id 35903, offset 0, flags [none], proto: UDP (17), length: 60) 172.17.1.10.36942 > 172.17.1.4.53: [udp sum ok] 19773+ A? www.paypal.com. (32) E..<[email protected]... .....N.5.(6.M=...........www.paypal.com..... 23:06:36.140594 IP (tos 0x0, ttl 64, id 56477, offset 0, flags [none], proto: UDP (17), length: 71) 172.17.1.4.6128 > 192.35.51.30.53: [udp sum ok] 10105 [1au] A? www.paypal.com. ar: . OPT UDPsize=4096 (43) E..G....@........#3....5.3fR'y...........www.paypal.com.......)........ 23:06:38.149756 IP (tos 0x0, ttl 64, id 13078, offset 0, flags [none], proto: UDP (17), length: 71) 172.17.1.4.52425 > 192.54.112.30.53: [udp sum ok] 54892 [1au] A? www.paypal.com. ar: . OPT UDPsize=4096 (43) [email protected]&.....6p....5.3.q.l...........www.paypal.com.......)........ 23:06:40.159725 IP (tos 0x0, ttl 64, id 43016, offset 0, flags [none], proto: UDP (17), length: 71) 172.17.1.4.24059 > 192.42.93.30.53: [udp sum ok] 11205 [1au] A? www.paypal.com. ar: . OPT UDPsize=4096 (43) E..G....@..@.....*].]..5.3..+............www.paypal.com.......)........ 23:06:41.141403 IP (tos 0x0, ttl 64, id 35904, offset 0, flags [none], proto: UDP (17), length: 60) 172.17.1.10.36942 > 172.17.1.4.53: [udp sum ok] 19773+ A? www.paypal.com. (32) E..<.@..@..@... .....N.5.(6.M=...........www.paypal.com..... 23:06:42.169652 IP (tos 0x0, ttl 64, id 44001, offset 0, flags [none], proto: UDP (17), length: 60) 172.17.1.4.9141 > 192.55.83.30.53: [udp sum ok] 1184 A? www.paypal.com. (32) E..<[email protected].#..5.(...............www.paypal.com..... 23:06:42.207295 IP (tos 0x0, ttl 54, id 38004, offset 0, flags [none], proto: UDP (17), length: 205) 192.55.83.30.53 > 172.17.1.4.9141: [udp sum ok] 1184- q: A? www.paypal.com. 0/3/3 ns: paypal.com. NS ns1.isc-sns.net., paypal.com. NS ns2.isc-sns.com., paypal.com. NS ns3.isc-sns.info. ar: ns1.isc-sns.net. AAAA 2001:470:1a::1, ns1.isc-sns.net. A 72.52.71.1, ns2.isc-sns.com. A 38.103.2.1 (177) E....t..6./A.7S......5#..................www.paypal.com..................ns1.isc-sns.net..............ns2.isc-sns...............ns3.isc-sns.info..,.......... ..p.............,..........H4G..I..........&g.. (this goes on for a few more seconds) If you look carefully, you will see that the first 3-4 root servers did not respond at all. This wastes 7-8 seconds, until one of them responded. Do you think I have setup something wrong here? Interestingly, when I dig directly from the root servers that did not respond, the always respond very fast (showing the firewall/nat is not the issue here). E.g. dig www.paypal.com @192.35.51.30 works perfectly, consistently, and very fast. What do you think about this mystery?

Read the article

Adding row to DataGridView from Thread

- by she hates me

Hello, I would like to add rows to DataGridView from two seperate threads. I tried something with delegates and BeginInvoke but doesn't work. Here is my row updater function which is called from another function in a thread. public delegate void GRIDLOGDelegate(string ulke, string url, string ip = ""); private void GRIDLOG(string ulke, string url, string ip = "") { if (this.InvokeRequired) { // Pass the same function to BeginInvoke, // but the call would come on the correct // thread and InvokeRequired will be false. object[] myArray = new object[3]; myArray[0] = ulke; myArray[1] = url; myArray[2] = ip; this.BeginInvoke(new GRIDLOGDelegate(GRIDLOG), new object[] { myArray }); return; } //Yeni bir satir daha olustur string[] newRow = new string[] { ulke, url, ip }; dgLogGrid.Rows.Add(newRow); }

Read the article

Close TCP connection when owner process is already killed

- by Otiel

I have a Windows service that - when it starts - opens some WCF services to listen on the 8000 port. It happens that this service crashes sometimes. When it does, the TCP connection is not released, thus causing my service to throw an exception if I try to start it again: AddressAlreadyInUseException: There is already a listener on IP endpoint 0.0.0.0:8000 Some observations: When running CurrPorts or netstat -ano, I can see that the 8000 port is still in use (in LISTENING state) and is owned by the Process ID XXX that corresponded to my service process ID. But my service has already crashed, and does not appear in the Task Manager anymore. Thus I can't kill the process to free the port! Of course, running taskkill /PID XXX returns: ERROR: The process "XXX" not found. When running CurrPorts or netstat -b, I can see that the process name involved in creating the listening port is System, and not as MyService.exe (whereas it is MyService.exe when my service is running). I tried to use CurrPorts to close the connection, but I always get the following error message: Failed to close one or more TCP connections. Be aware that you must run this tool as admin in order to close TCP connections. (Useless to say, I do run CurrPorts as Administrator...) TCPView is not much help either: the process name associated to the 8000 port is <non-existent>, and doing "End process" or "Close connection" has no effect. I tried to see if there was not a child process associated with the PID XXX using Process Explorer, but no luck here. If I close my service properly (before it crashes), the TCP connection is correctly released. This is normal, as I close the WCF service hosts in the OnStop() event of my service. The only way I found to release the connection is to restart the server (which is not convenient in a production environment as you can guess). Waiting does not help, the TCP connection is never released. How can I close the connection without restarting the Windows server? PS: found some questions extremely similar to mine.

Read the article

Using PHP to read a web page with fsockopen(), but fgets is not working

- by asdasd

Im using this code here: http://www.digiways.com/articles/php/httpredirects/ public function ReadHttpFile($strUrl, $iHttpRedirectMaxRecursiveCalls = 5) { // parsing the url getting web server name/IP, path and port. $url = parse_url($strUrl); // setting path to '/' if not present in $strUrl if (isset($url['path']) === false) $url['path'] = '/'; // setting port to default HTTP server port 80 if (isset($url['port']) === false) $url['port'] = 80; // connecting to the server] // reseting class data $this->success = false; unset($this->strFile); unset($this->aHeaderLines); $this->strLocation = $strUrl; $fp = fsockopen ($url['host'], $url['port'], $errno, $errstr, 30); // Return if the socket was not open $this-success is set to false. if (!$fp) return; $header = 'GET / HTTP/1.1\r\n'; $header .= 'Host: '.$url['host'].$url['path']; if (isset($url['query'])) $header .= '?'.$url['query']; $header .= '\r\n'; $header .= 'Connection: Close\r\n\r\n'; // sending the request to the server echo "Header is: ".str_replace('\n', '\n', $header).""; $length = strlen($header); if($length != fwrite($fp, $header, $length)) { echo 'error writing to header, exiting'; return; } // $bHeader is set to true while we receive the HTTP header // and after the empty line (end of HTTP header) it's set to false. $bHeader = true; // continuing untill there's no more text to read from the socket while (!feof($fp)) { echo "in loop"; // reading a line of text from the socket // not more than 8192 symbols. $good = $strLine = fgets($fp, 128); if(!$good) { echo 'bad'; return; } // removing trailing \n and \r characters. $strLine = ereg_replace('[\r\n]', '', $strLine); if ($bHeader == false) $this-strFile .= $strLine.'\n'; else $this-aHeaderLines[] = trim($strLine); if (strlen($strLine) == 0) $bHeader = false; echo "read: $strLine"; return; } echo "after loop"; fclose ($fp); } This is all I get: Header is: GET / HTTP/1.1\r\n Host: www.google.com/\r\n Connection: Close\r\n\r\n in loopbad So it fails the fgets($fp, 128);

Read the article

How does the socket API accept() function work?

- by Eli Bendersky

The socket API is the de-facto standard for TCP/IP and UDP/IP communications (that is, networking code as we know it). However, one of its core functions, accept() is a bit magical. To borrow a semi-formal definition: accept() is used on the server side. It accepts a received incoming attempt to create a new TCP connection from the remote client, and creates a new socket associated with the socket address pair of this connection. In other words, accept returns a new socket through which the server can communicate with the newly connected client. The old socket (on which accept was called) stays open, on the same port, listening for new connections. How does accept work? How is it implemented? There's a lot of confusion on this topic. Many people claim accept opens a new port and you communicate with the client through it. But this obviously isn't true, as no new port is opened. You actually can communicate through the same port with different clients, but how? When several threads call recv on the same port, how does the data know where to go? I guess it's something along the lines of the client's address being associated with a socket descriptor, and whenever data comes through recv it's routed to the correct socket, but I'm not sure. It'd be great to get a thorough explanation of the inner-workings of this mechanism.

Read the article

boost::asio::async_resolve Problem

- by Moo-Juice

Hi All, I'm in the process of constructing a Socket class that uses boost::asio. To start with, I made a connect method that took a host and a port and resolved it to an IP address. This worked well, so I decided to look in to async_resolve. However, my callback always gets an error code of 995 (using the same destination host/port as when it worked synchronously). code: Function that starts the resolution: // resolve a host asynchronously template<typename ResolveHandler> void resolveHost(const String& _host, Port _port, ResolveHandler _handler) const { boost::asio::ip::tcp::endpoint ret; boost::asio::ip::tcp::resolver::query query(_host, boost::lexical_cast<std::string>(_port)); boost::asio::ip::tcp::resolver r(m_IOService); r.async_resolve(query, _handler); }; // eo resolveHost Code that calls this function: void Socket::connect(const String& _host, Port _port) { // Anon function for resolution of the host-name and asynchronous calling of the above auto anonResolve = [this](const boost::system::error_code& _errorCode, boost::asio::ip::tcp::resolver_iterator _epIt) { // raise event onResolve.raise(SocketResolveEventArgs(*this, !_errorCode ? (*_epIt).host_name() : String(""), _errorCode)); // perform connect, calling back to anonymous function if(!_errorCode) connect(*_epIt); }; // Resolve the host calling back to anonymous function Root::instance().resolveHost(_host, _port, anonResolve); }; // eo connect The message() function of the error_code is: The I/O operation has been aborted because of either a thread exit or an application request And my main.cpp looks like this: int _tmain(int argc, _TCHAR* argv[]) { morse::Root root; TextSocket s; s.connect("somehost.com", 1234); while(true) { root.performIO(); // calls io_service::run_one() } return 0; } Thanks in advance!

Read the article

Parameters with dots on the URI

- by robertokl

In my application, there is a resource, machine, and a nested resource from machine: ip. I want to be able to access the URI of an Ip typing the ip address. The URI should be something like this: /machines/m123/ips/192.168.0.1.xml Where "m123" is the name of the machine and "192.168.0.1" is one of the ips of that machine. The problem here is that rails miss understand the dots from the ip and the format. When I try to access this page, i get: No route matches "/machines/m123/ips/192.168.0.1.xml" And if I replace the dots for any other character it works, witch means that rails isn't handling the dots on the URI. Is there any way to enter a more complex regexp on the routes to make sure rails can treat it the way I want? I'm using rails 2.3.5 and ruby 1.8.7. Thank you.

Read the article

Socket read() hangs for a while when there is no data to read.

- by janesconference

Hi' I'm writing a simple http port forwarder. I read data from port 80, and pass the data to my lighttpd server, on port 8080. As long as I write() data on the socket on port 8080 (forwarding the request) there's no problem, but when I read() data from that socket (forwarding the response), the last read() hangs a lot (about 1 or 2 seconds) before realizing there's no more data and returning 0. I tried to set the socket to non-blocking, but this doesn't work, as sometimes it returns EWOULDBLOCKING even if there's some data left (lighttpd + cgi can be quite slow). I tried to set a timeout with select(), but, as above, a slow cgi could timeout the socket when there's actually some data to transmit. How would you do?

Read the article

Prepopulate drop-box according to another drop-box choice in Django Admin

- by onorua

I have models like this: class User(models.Model): Switch = models.ForeignKey(Switch, related_name='SwitchUsers') Port = models.ForeignKey(Port) class Switch(models.Model): Name = models.CharField(max_length=50) class Port(models.Model): PortNum = models.PositiveIntegerField() Switch = models.ForeignKey(Switch, related_name = "Ports") When I'm in Admin interface and choose Switch from Switches available, I would like to have Port prepopulated accordingly with Ports from the related Switch. As far as I understand I need to create some JS script to prepopulate it. Unfortunately I don't have this experience, and I would like to keep things simple as it possible and don't rewrite all Django admin interface. Just add this functionality for one Field. Could you please help me with my problem? Thank you.

Read the article

Connecting Java se Client to Glassfish

- by Henrik Bierbum Bacher

We are having some difficulties connecting our Java SE standalone client with the EJB module deployed on a remote GlassFish server. Pointers to how we are supposed to connect our client would be appreciated. The client code we currently has to get the initial context: props.setProperty("org.omg.CORBA.ORBInitialHost", "*remotehost*"); props.setProperty("org.omg.CORBA.ORBInitialPort", "portNumber"); javax.naming.InitialContext ic = new javax.naming.InitialContext(props); *We have tried several different port numbers; 3700, 7676, 8080.. The closest we are getting, got us the error: "Error in GIOP magic". I read that jms are using port 7676 as a broker port for a bunch of dynamically generated ports, but can't figure out how to specify those ports in order to create proper port-forwards.

Read the article

how to multithread on a python server

- by user3732790

HELP please i have this code import socket from threading import * import time HOST = '' # Symbolic name meaning all available interfaces PORT = 8888 # Arbitrary non-privileged port s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) print ('Socket created') s.bind((HOST, PORT)) print ('Socket bind complete') s.listen(10) print ('Socket now listening') def listen(conn): odata = "" end = 'end' while end == 'end': data = conn.recv(1024) if data != odata: odata = data print(data) if data == b'end': end = "" print("conection ended") conn.close() while True: time.sleep(1) conn, addr = s.accept() print ('Connected with ' + addr[0] + ':' + str(addr[1])) Thread.start_new_thread(listen,(conn)) and i would like it so that when ever a person comes onto the server it has its own thread. but i can't get it to work please someone help me. :_( here is the error code: Socket created Socket bind complete Socket now listening Connected with 127.0.0.1:61475 Traceback (most recent call last): File "C:\Users\Myles\Desktop\test recever - Copy.py", line 29, in <module> Thread.start_new_thread(listen,(conn)) AttributeError: type object 'Thread' has no attribute 'start_new_thread' i am on python version 3.4.0 and here is the users code: import socket #for sockets import time s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) print('Socket Created') host = 'localhost' port = 8888 remote_ip = socket.gethostbyname( host ) print('Ip address of ' + host + ' is ' + remote_ip) #Connect to remote server s.connect((remote_ip , port)) print ('Socket Connected to ' + host + ' on ip ' + remote_ip) while True: message = input("> ") #Set the whole string s.send(message.encode('utf-8')) print ('Message send successfully') data = s.recv(1024) print(data) s.close

Read the article

How to connect to a network of activemq brokers from a client application?

- by subh

I have setup a network of brokers in activemq, how do i connect to that from my client application I tried with network:static:(tcp://master1.IP:61616,tcp://master2.IP:61617) and but I get the following exception javax.jms.JMSException: Uncategorized exception occured during JMS processing; nested exception is javax.jms.JMSException: Could not create Transport. Reason: java.io.IOException: Transport scheme NOT recognized: [network]; With static:(tcp://master1.IP:61616,tcp://master2.IP:61617) I get exception javax.jms.JMSException: Uncategorized exception occured during JMS processing; nested exception is javax.jms.JMSException: Could not create Transport. Reason: java.io.IOException: Transport scheme NOT recognized: [static]; Thanks

Read the article

SPF record doesn't work (not sure which DNS server to tweak)

- by Ion

Problem: Google (and perhaps others) marks our emails as SPF neutral. Let me give you some background about the setup: initially got a dedicated server (Hetzner) with Plesk installed to host a domain/web application, let's say: bigjaws.com. Plesk automatically creates a DNS zone for it with some records for the various services it provides out of the box, e.g. webmail.bigjaws.com as a CNAME to bigjaws.com to provide Horde/whatever, etc. Let me point out four relevant of these records (where XXX.XXX.XXX.158 is our dedicated IP): bigjaws.com. A XXX.XXX.XXX.158 mail.bigjaws.com. A XXX.XXX.XXX.158 bigjaws.com MX (10) mail.bigjaws.com. bigjaws.com. TXT v=spf1 +a +mx -all The above records are not(?) valid anymore though, because after using this dedicated server for a while, our site got bigger and bigger so we decided to move our operations over to AWS (EC2, RDS, ELB, etc), but we retained the mail functionality as is, i.e. emails from [email protected] are sent by connecting to our dedicated server where Plesk takes care of things. This was decided in order not to setup anything from scratch. Of course for all DNS-related things we now use Route53. In Route53 I have the following records: mail.schoox.com. A XXX.XXX.XXX.158 bigjaws.com. MX (10) mail.bigjaws.com bigjaws.com. SPF "v=spf1 +ip4:XXX.XXX.XXX.158 +mx ~all" From my understanding of SPF, the SPF status should have been passed: I designate that all email being sent by bigjaws.com from XXX.XXX.XXX.158 are valid/not spam (I added +mx there but I'm not sure if needed). When a mail server receives an email, doesn't it lookup the SPF record of the domain and checks against the IP it got the email from? Checking with spfquery: root@box:~# spfquery -ip XXX.XXX.XXX.158 -sender [email protected] -rcpt-to [email protected] StartError Context: Failed to query MAIL-FROM ErrorCode: (2) Could not find a valid SPF record Error: No DNS data for 'bigjaws.com'. EndError noneneutral Please see http://www.openspf.org/Why?id=employee1%40bigjaws.com&ip=XXX.XXX.XXX.158&receiver=spfquery : Reason: default spfquery: XXX.XXX.XXX.158 is neither permitted nor denied by domain of bigjaws.com Received-SPF: neutral (spfquery: XXX.XXX.XXX.158 is neither permitted nor denied by domain of bigjaws.com) client-ip=XXX.XXX.XXX.158; [email protected]; If I go to the address listed above (openspf.org) it tells me that the message should have been accepted(!): spfquery rejected a message that claimed an envelope sender address of [email protected]. spfquery received a message from static.158.XXX.XXX.XXX.clients.your-server.de (XXX.XXX.XXX.158) that claimed an envelope sender address of [email protected]. The domain bigjaws.com has authorized static.158.XXX.XXX.XXX.clients.your-server.de (XXX.XXX.XXX.158) to send mail on its behalf, so the message should have been accepted. It is impossible for us to say why it was rejected. What should I do? If the problem persists, contact the bigjaws.com postmaster. Also, here are some headers from an email sent by one of our [email protected] addresses to a gmail.com address (by the way, bigjaws.de listed in the "Received: from" field was the initial domain hosted on the dedicated server before adding the .com one -- both are still listed as separate subscriptions under Plesk). Delivered-To: [email protected] Received: by 10.14.177.70 with SMTP id c46csp289656eem; Wed, 23 Oct 2013 01:11:00 -0700 (PDT) X-Received: by 10.14.102.66 with SMTP id c42mr306186eeg.47.1382515860386; Wed, 23 Oct 2013 01:11:00 -0700 (PDT) Return-Path: <[email protected]> Received: from bigjaws.de (static.158.XXX.XXX.XXX.clients.your-server.de. [XXX.XXX.XXX.158]) by mx.google.com with ESMTPS id l4si19438578eew.161.2013.10.23.01.10.59 for <[email protected]> (version=TLSv1 cipher=RC4-SHA bits=128/128); Wed, 23 Oct 2013 01:10:59 -0700 (PDT) Received-SPF: neutral (google.com: XXX.XXX.XXX.158 is neither permitted nor denied by best guess record for domain of [email protected]) client-ip=XXX.XXX.XXX.158; Authentication-Results: mx.google.com; spf=neutral (google.com: XXX.XXX.XXX.158 is neither permitted nor denied by best guess record for domain of [email protected]) [email protected] DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=default; d=bigjaws.com; b=WwRAS0WKjp9lO17iMluYPXOHzqRcOueiQT4rPdvy3WFf0QzoXiy6rLfxU/Ra53jL1vlPbwlLNa5gjoJBi7ZwKfUcvs3s02hJI7b3ozl0fEgJtTPKoCfnwl4bLPbtXNFu; h=Received:Received:Message-ID:Date:From:User-Agent:MIME-Version:To:Subject:Content-Type:Content-Transfer-Encoding; Received: (qmail 22722 invoked from network); 23 Oct 2013 10:10:59 +0200 Received: from hostname.static.ISP.com (HELO ?192.168.1.60?) (YYY.YYY.ISP.IP) by static.158.XXX.XXX.XXX.clients.your-server.de. with ESMTPSA (DHE-RSA-AES256-SHA encrypted, authenticated); 23 Oct 2013 10:10:59 +0200 Message-ID: <[email protected]> Date: Wed, 23 Oct 2013 11:11:00 +0300 From: BigJaws Employee <[email protected]> User-Agent: Mozilla/5.0 (Windows NT 6.2; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.0.1 MIME-Version: 1.0 To: [email protected] Subject: test SPF Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit test SPF Any ideas why SPF is not working correctly? Also, are there any DNS settings that are not needed anymore and create a problem?

Search Results

Search found 18781 results on 752 pages for 'ip port'.

Page 213/752 | < Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220 | Next Page >

- by Poma

- by user163352

- by Spredzy

- by k-g-f

- by gablin

- by Bounded

- by rajya vardhan

- by dave-keiture

- by zxcvbnm

- by Jamie Edwards

- by nullptr

- by Ronald

- by Ehsan

- by she hates me

- by Otiel

- by asdasd

- by Eli Bendersky

- by Moo-Juice

- by robertokl

- by janesconference

- by onorua

- by Henrik Bierbum Bacher

- by user3732790

- by subh

- by Ion

< Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220 | Next Page >