Search Results

Search found 19586 results on 784 pages for 'machine instruction'.

Page 213/784 | < Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >

  • How do i find out what's preventing delete requests from working in iis7.5 and iis8?

    - by Simon
    Our site has an MVC Rest API. Recently, both the live servers and my development machine stopped accepting DELETE requests, instead returning a 501 Not Implemented response. On my development machine, which is Windows 7 running IIS7.5, the solution was to add these lines to our Web.config, under system.webServer / handlers: <remove name="ExtensionlessUrlHandler-Integrated-4.0" /> ... <add name="ExtensionlessUrlHandler-Integrated-4.0" path="*." verb="GET,HEAD,POST,DEBUG,PUT,DELETE" type="System.Web.Handlers.TransferRequestHandler" resourceType="Unspecified" requireAccess="Script" preCondition="integratedMode,runtimeVersionv4.0" /> However, this didn't work on any of our live servers; not on Sever 2008 + IIS7.5 and not on Server 2012 + IIS8. There are no verbs set up in Request Filtering, and WebDAV is not installed on any of our live servers. The error page gives no further information, and nothing gets recorded in the logs. How do I find out what's preventing DELETE requests from working in iis7.5 and iis8?

    Read the article

  • Error installing Network driver

    - by Simon Carpentier
    I'm tring to install NetLimiter 3 (3.0.0.10, x64) on my Windows 7 x64 machine. At the driver installation step, I'm getting an error: Error 0x8004a029: Couldn't install the network component. (InstallNdisIMDriver) UPDATE 2010-09-20: I received a response to my support request: Hi Simon, It seems that problem is rather on your system than in NL3. Too many networking applications (VPN, Virtual computers) are installed on your machine and they are preventing NL3 from proper installation. In order to install NetLimiter 3, try to disable/temporarily remove these apps. Several users had the same problem and shuffling with adapter and networking software helped them. Please, let us know which action helps you (if any). Sincerely, Jan Bilek Any thoughts on this?

    Read the article

  • can't configure openfire

    - by SnOrfus
    I'm trying to setup openfire on one of the servers here and I've gone through the windows installer, installed the service, started the service and I can't connect to the admin console. If I go to http://127.0.0.1:9090 (or http://127.0.0.1/index.html) all I get is a blank page. I also tried running the GUI instead of the service, and it said that it was listening on 127.0.0.1:9090 and when I navigate there or click "launch admin" I still get a blank page. What could be the problem? It's a windows server 2k3 machine with IIS running (runs a couple of other sites). edit openfire 3.6.4 I installed on my local machine without problems, so it's obviously something on the server that's causing it. There is no firewall installed on that server so I'm not sure what would be stopping it.

    Read the article

  • Help with IPTables - Masquerading + Forwarding, 1-to-1?

    - by Artiom Chilaru
    I've got a clean Ubuntu Server 10.10 with OpenSSH, OpenVPN and vsFTPd installed. The server is running as a VM on the Hyper-V server (hypervisor), has two network interfaces mapped to physical adapters (eth0 and eth1), and a virtual interface with a direct connection to the hypervisor (eth2). The VPN will create a tun0 interface when a client connects. What I want is the remote user, connecting over VPN to be able to connect to the hypervisor (all ports, ping etc). The initial idea was to make the VPN create a tap0 interface, and bridge eth2 to tap0, but this didn't work, unfortunately, as it seems that the adapters don't want to go into promiscuous mode (partially confirmed by MS) At the same time, both the hypervisor and the remove client over VPN can successfully ping/connect to the ubuntu server with no problems. So my plan right now is to try doing some 1-1 masquerading, if possible. Basically, I want every request sent from the VPN client to the ubuntu server to be redurected to the hypervisor instead (with IP translation ofc), and every request from the hypervisor to the ubuntu machine sent to the VPN client (IP translated too). Only 1 client will be connected at a time to the VPN, so I can force limit it to a single IP at all times, if necessary. Is this the right way to go, and if true, how can this be achieved? It's almost like a special case of port-forwarding, except every single port on tun0 is forwarded to a machine in eth2, and every port on the eth2 side forwards to an ip on tun0 I guess it could be done with iptables, but I'm rather new in linux, so I can't do it myself... help? :(

    Read the article

  • Good option for a transparent internet gateway on Mac OS X

    - by Gareth
    Hi I have a small network of Mac systems, and would like to add some internal monitoring of our internet usage, which has recently begun to climb. I would like to configure one of the machines as an internet gateway, and install some monitoring software that could provide graph indications of network usage by machine. The machine would then double as a workstation and as the internet gateway. I can manually configure the machines on the network to use it as a gateway, and would prefer to avoid an explicit http proxy (although it is an option if necessary). What software would serverfault users recommend to provide simple, easily configurable and maintainable network monitoring on Mac OS 10.5.7 (non-server)? The simplest requirement is monitor usage by IP Address, but additional tracking (e.g. destination, protocol, etc) would be useful.

    Read the article

  • Server 2008 Hard Faults

    - by claw
    Hey all, plase bear with me as I haven't looked at a server in a very long time. The problem I am having is with a Windows 2008 Standard FE Service Pack 2 Intel Xeon X3430 @ 2.40 2.39 GHZ 4 GB Memory 64 Bit There seems to be no problems other than the physical memory peaking at 91%, always with over 100 Hard Faults Per Second. To my understanding hard faults should be fairly rare on a machine with. Are there any logs I can show you? Or investigate myself. The general performance of the machine is ok, i can access SBS2008 and change settings fairly smoothly without hangs etc. However, we connect to the server and do quite a bit of SQL via an application. For a record to retrieve say 20 rows, it can take 20+ seconds. Thanks in advance, Jamie EDIT: What the server is used for: IIS ASP Web Service SQL 2008 List item Exchange unable to upload screenshots due to low reputation - why doesnt my SO work here :)

    Read the article

  • Disable Acer eRecovery system

    - by Joel Coehoorn
    The meat of this question is that I'm looking for a way to either require a password before using a recovery partition or "break" the recovery partition (specifically, Acer eRecovery) in a way that I can later "unbreak" only by booting normally into windows first. Here's the full details: I have a set of new Acer Veriton n260g machines in a computer lab. A lot work went into setting up this lab to work well - for example, Office 2007 and other programs needed by the students were installed, all windows updates are applied, and a default desktop is setup. All in all it's several hours work to fully set up one machine. Unfortunately, I don't currently have the ability to easily image these machines, and even if I did I would want to avoid downtime even while an image is restored. Therefore, I've taken steps to lock them down — namely DeepFreeze and a bios password to prevent booting from anywhere but the frozen hard drive. DeepFreeze is an amazing product — as long as you boot from the frozen hard drive, there is no way to actually make permanent changes to that hard drive. Anything you do is wiped after the machine restarts. It lets me give students the leeway to do what they want on lab computers without worrying about them breaking something. The problem is that even with the bios locked and set to only boot from the hard drive, these Acers still have a simple way to choose a different boot source: shut them down and put a paper click in a little hole at the top while you turn it on again. This puts them into the "Acer eRecovery" mode. This by itself is no big deal — you can still power cycle with no impact. But if you then click through the menu to reset the machine (we're now past the point of curiosity and on to intent) it will wipe the hard drive and restore it to the original state. Of course, a few students have already figured this out and reset a couple machines. That's unfortunate, but inevitable. I don't want to destroy the ability to do this entirely (which I could by repartitioning the drives to remove the recovery partition) but I would like a way to require a password first, or "break" the recovery system in a way that I can "unbreak" only if I first un-freeze the hard drive in DeepFreeze. Any ideas?

    Read the article

  • New Outlook 2003 message, cursor sometimes goes to body, sometimes goes to "To:" field

    - by normalocity
    I've got an Outlook 2003 client that, when you click on "New message", about half the time the cursor defaults to being in the "body" of the message, and the other half of the time it defaults to the cursor being in the "To:" field. Anyone know why this might be happening? Thought it might be related to having Word set, or not set, to be the default email editor, but that had no effect. Also, this particular user reports that, on their previous machine, it always defaults to the "To:" field. I happen to still have that machine around, unmodified from when it was removed from the, and they are correct - it never goes to the body. I also read that some people had this issue and turned off the "Outlook today" feature to fix it, with mixed results. However, in this case the "Outlook today" feature isn't even turned on.

    Read the article

  • Wireless not working on desktop with Asus USB-N13 (B1) wireless adapter

    - by user900749
    I am trying to connect my desktop to a wireless network. I have purchased an ASUS USB-N13 B1 adapter. I have followed instructions for installing drivers and disabling conflicting drivers. I have thoroughly searched and could not find a solution. The adapter is recognized and powered on. I have entered the ssid and password information into the wireless network configuration. Other machines can connect to this wireless network, and the machine can connect online via ethernet without issue. Here is the output of some commands which summarize my configuration, and might give some clues : ~$ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS" ~$ uname -a Linux petra 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux ~$ lsusb Bus 001 Device 006: ID 0b05:17ab ASUSTek Computer, Inc. ~$ dmesg [ 1883.823150] wlan0: authenticate with 48:5b:39:e7:25:5e (try 1) [ 1884.020027] wlan0: authenticate with 48:5b:39:e7:25:5e (try 2) [ 1884.220025] wlan0: authenticate with 48:5b:39:e7:25:5e (try 3) [ 1884.420023] wlan0: authentication with 48:5b:39:e7:25:5e timed out Any assistance would be appreciated as I have been trying to get this machine online for several weeks now to no avail. Sincerely, Michael.

    Read the article

  • XP Restart After Power Failure

    - by Jim
    Hello, I've almost got my power settings sorted and was hoping someone could help? If I'm running XP and the power is cut, when the power is restored my machine auto restarts (this is what I want!) However, if I shutdown my machine properly (from the start menu & without touching the PC power button!), then switch the power off at the socket, then switch the power back on, the PC does not automatically restart. It's like the bios(?) recieives a message saying "aha, genuine shutdown and not a power cut, therefore do not restart on power restore." I want my PC to restart everytime it sees power restored from the socket? Any way round this? Anyone seen this before? I've upgraded my bios. Thanks in advance, Jim

    Read the article

  • Generic socket 940 CPU fan interchangeable with HP part number 411454-001

    - by ConcernedOfTunbridgeWells
    Hi, I'm trying to find a generic CPU fan that will fit the air duct in an XW9300. Note that there are two CPU fan mounting schemes used on this machine. One with two grommets in the motherboard that the CPU fan screws into and one with a plastic collar and base plate. The form factor I'm looking for is the former (see picture below): Two HP part numbers for fans in this form factor are 411454-001 (shown below) and 416055-001. Note that the dimensions are important as the machine has an air duct that fits over the fan. Can anyone tell me the manufacturer and model of an equivalent generic part? Better yet, do you know somewhere (preferrably in the UK) that I can obtain such an item from?

    Read the article

  • Connect to virtual host computer from within virtualbox

    - by Nicky De Maeyer
    I'm currently developing on an ubuntu karmic. For this I've installed lampp with a virtual host on apache so http://myproject/ is mapped to my project's root directory. Now to test the website in IE I've installed an XP machine on a virtualBox OSE. Ive managed to get the virtual host working on the XP by adding its to the hostfile, like this: 255.255.255.255 myproject where 255.255.255.255 is the ip adress of the host computer (my ubuntu). Now every day when I come to work and plug in my computer to the network, my IP has changed. so When i boot the XP I have to change the IP in the hostfile to my new IP. Is there any way where I can set the ip to somthing the XP will recognise as the host machine? I've tried replacing the IP in the hostfile by the host computer name, but that does not seem to work... This would make my like a bit easier :)

    Read the article

  • Tomcat and IIS6 on one server, multiple websites

    - by Rafe
    Windows Server 2003 with IIS6 and Tomcat 6.0.26. Three sites running on this server. One is PHP, one is ASP and the third uses Tomcat. The first two work flawlessly. The third is being a pain. Tomcat is installed and if called on the server itself by IP address xxx.xxx.xxx.xxx:8080 shows the welcome page. Calling the same address from an external machine gives a 'could not connect' error. Calling the ip address from within the server on standard port 80 gives me an error 324 (net::ERR_EMPTY_RESPONSE). Have tried using httpcfg to force listening only on ports within the ip range I'm using in a manner similar to question 35650 located here on serverfault but with no success. There are actually ten ip addresses on this machine but I'm only using three of them at this point. Any pointers on troubleshooting this would be appreciated!

    Read the article

  • Small Business Server services will not start, and remote desktop and UAC are broken

    - by Stephen Jennings
    Yesterday I began setting up a server with Windows Small Business Server 2008. All I am configuring it for right now is to be a domain controller and Exchange server. I completed the initial setup of SBS then started looking through different connection options (allowing VPN versus using a TS Gateway). After I rebooted one time, I started having three not-obviously-related issues: First, I could no longer remote desktop into the computer. I ran TCPView and saw that it was no longer listening on port 3389. I checked everything in Terminal Service Configuration but everything shows the computer ought to be allowing connections. Also, when I tried to use anything that required user account control elevation, the UAC dialog never popped up and the program that was waiting just froze. If I try to run "regedit" from the Run box, for example, it never appears. When I run in safe mode which does not run with UAC, I was able to access everything. I didn't want to deal with it, so I turned off UAC and rebooted. Finally, in the Windows SBS Console, there are status indicators for Security, Updates, Backup, and Other Alerts. The first three get stuck saying "Querying". Looking in the computer alerts, I have events showing the following services stopped: Background Intelligent Transfer Service KtmRm for Distributed Transaction Coordinator Distributed Transaction Coordinator Microsoft Exchange Information Store Microsoft Exchange System Attendant Microsoft Exchange Transport Windows Remote Management Update Services Windows Update I figured I must have configured something wrong accidentally and I couldn't find anything using Google explaining what might be the case, so I just decided to format the hard drive and reinstall SBS from scratch. I did this and everything was working last night, but I just turned the machine back on and it is doing the same thing again! On my second install, I did not configure anything except the following (all from SBS Console): Connect to the Internet (set IP and router address) Turn off customer feedback. Set up internet address. Decline to use a Smart Host for email. Added one standard user account. Since this happened again and I was very careful the second time not to configure anything outside of the SBS Console, I feel like there's something else going on. Right now the machine is on an isolated network that does have internet access. My desktop is the only other machine plugged into this network. Any and all help is appreciated (before I tear my hair out!)

    Read the article

  • Swap, Swapiness and Standby: swapping starts when waking up

    - by mdo
    I'm running running Ubuntu 12.04 on a Lenovo W500 (Core2Duo T9400, 4GB Ram) Current kernel: 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux -- but the problems exists since a couple of months, surviving quite a few software (includig kernel) updates I regularly put my machine into suspend-to-ram (S3) and when the machine comes back up Ubuntu starts to swap out processes. I was able to observe that the used swap-space starts to grow right after the box returns. See munin graphs below, the gap (obviously) shows the timeframe in STR. Needless to say that the box becomes unusable while swapping, load goes up beyond 10. What I've done so far: lowered swappiness from default (60) to 10 (via /etc/sysctl.conf: vm.swappiness=10) -- this has improved the situation much, but sometimes the problem comes back, I have not found a trigger (like memory usage) for this for now lowered swappiness to 5 -- perhaps this has brought an improvement again Before going to STR the box ran stable without (swapping) problems for hours. Today when the issue showed up again I used this script (- http://stackoverflow.com/questions/479953/how-to-find-out-which-processes-are-swapping-in-linux) to find what processes have the most used swap space. The result after the swap orgy is like that (all PIDs with more than 10M usage): Overall swap used: 2121344 kB ======================================== kB pid name ======================================== 439520 17491 java 208148 22719 firefox 136640 4337 /usr/bin/quodli 120852 5271 chrome 81832 5264 chrome 74284 17003 chrome 65368 16960 chrome 57088 3675 chrome 56184 30923 chrome 54412 11331 chrome 54264 3878 chrome 51508 18382 chrome 50088 3163 zeitgeist-fts 49772 15543 chrome 41344 15355 compiz 35040 1161 mysqld 32124 18374 chrome 30940 11339 chrome 30044 5752 chrome 28780 4235 plugin-containe 24576 31246 empathy-chat 23840 17703 chrome 22512 3207 ubuntuone-syncd 21588 1937 ntop 18336 2021 asterisk 17200 3915 chrome 13964 1935 Xorg 12036 10679 chrome 11104 30782 empathy 11056 2889 python 10932 16565 knotify4 The java instance at the top is IntelliJ. IntelliJ, Firefox and Chrome also were all used right before the box was put to STR. So my question is: can I somehow prevent these swapouts AND why do they happen? Is it perhaps related to some misidentification of idle processes? I'm not looking for resolutions like: turn off swap buy more RAM Thanks in advance!

    Read the article

  • Internet connection slower than network connection speed

    - by Mike Pateras
    I've got a computer connected to a wireless router on a different floor. When I look at the network connection, I'm told the signal strength is low, and that I've got a connection of about 26mbps (often higher). However, my internet connection on that machine is very slow. Speedtests show it at about 1-2mbps, and it really shows when loading pages and video. I have fiber optic internet access, and the machine that's connected to the router/modem via cable gets the 20mbps on speed tests, and is extremely fast in every day use. My question is, is the advertised 26mbps+ connection speed perhaps inaccurate, and that my wireless bandwidth is the likely bottleneck here? Or is the signal strength what's key here? And what might I do about this? Power cycling the router helped a bit, a speed test went as high as 6mbps after doing that.

    Read the article

  • How can I get past a BSOD 07b when booting from a VHD?

    - by Dan
    I thought I'd be clever and use disk2vhd at the end of my contract to backup my machine so I could easily restore it when I started my new contract, no matter what the buffoons had done with it in the meantime. I didn't count on them losing it. I'm trying to boot this new machine from the VHD. I get the windows logo and then a 07B bluescreen error, something to do with the disk, and it won't boot even in safe mode. The cure apparently is to run sysprep but I can't run that unless I can boot into the VHD so... I can mount the disk, is there a way to modify it

    Read the article

  • Deploy virtual PC based on snapshot using Hyper-V

    - by user27786
    I have a server with Hyper-V configured, it is easy to create a new virtual machine using the management tools, but it can take some time. I often see those hosts that say "We can have your server ready in 5 seconds". And I wonder how do they manage this? I would also like to deploy a full functional clean server in 5 seconds. So how is this done? Is it by first installing a clean server, then take a snapshot of that for later to deploy a new server based on that snapshot? I tried doing this, but I did not find any where to install a new virtual machine based on the snapshot. Anyone got any thoughts to share on this?

    Read the article

  • Tablet pen loses pressure sensitivity after screensaver

    - by Rohit Nair
    Tablet: Genius MousePen 8x6 System: Windows 7 64-bit The question says it all. When I first boot up my machine, the tablet works fine, with pressure sensitivity functionality. However, if I leave the machine long enough for the screensaver to start up, when I return, the tablet works just like a mouse, and does not respond to changes in pen pressure. Unplugging and replugging the device does not fix the problem. Disabling and enabling the device in device manager does not fix the problem. When I try to use the tablet config tool -before- screensaver, the pressure config works fine. It gives you a little area where you can draw to test out the pressure. When I try to use the same tool -after- screensaver, the moment I click on that drawing area, the config tool freezes.

    Read the article

  • ssh port forwarding freezes after 10 simultaneous connections

    - by Marko Kevac
    Hello. I am using port forwarding to utilize proxy server which is on remote machine. Remote machine hostname is remotemachine. Proxy is listening on 8118 port. I am translating this port to local port 5223. ssh -vvv -N remotemachine -L 5223:localhost:8118 Everything is fine if I don't use more than 10 simultaneous connections, when ssh just freezes. It no longer send data trough port forwarding. I.e. ab -c 10 -t 5 -X 'localhost:5223' 'http://www.google.ru/' works, but ab -c 20 -t 5 -X 'localhost:5223' 'http://www.google.ru/' causes ssh to freeze MaxSessions 30 parameter in /etc/ssh/sshd_config didn't helped at all. What can I do to remove this 10 connection limit? Nothing interesting in -vvv output =(

    Read the article

  • How to copy directories using debugfs?

    - by STM
    The debugfs manpage gives the impression that the command 'rdump . .' will recursively copy all files found on the specified filesystem from the debugfs cwd to the native filesystem's cwd. Instead I seem to receive a syntax error, and no copy is initiated? These are the commands I run: cd /path/to/transfer/destination debugfs /dev/sda1 -R rdump . . My task is to copy the entire contents of a clean yet unmountable USB storage device to its host machine's HD. The host machine does not support the inode size used by the USB device's filesystem (256) and its software is not upgradeable, so my intention was to use debugfs to transfer the files. If anyone has any other suggestions for this task I'd be grateful.

    Read the article

  • How to share internet connection on Mac os x to Virtualbox vm's using Host-only

    - by redben
    In one line : is the following possible : Airport <- osx bridge - vbox-Host-only - vm's On a mac os x, i have virtual box with a virtual machine. For now i have configured 2 interfaces for my virtual machine eth0 is normal bridge for my vm to acces the internet (when airport is connected) eth1 is set to host-only so i can access my vm from the host when there is no wifi/aiport is down. So basically it's like Adapter 1 when there is Wifi, Adapter 2 when there is not. I'd like to have only one configuration to make it simpler. I thought i could just keep the Host only configuration, and on the host (os x) go to internet sharing and select "share from airport" to vboxnet0 (the vb virtual interface). Only to find out that vboxnet0 dosn't show up in the interfaces list on os x preferences. I know that on a linux host you could install something called bridge-utils and use that to bridge the two insterfaces. Is there any thing like that for Mac ?

    Read the article

  • how to access locally deployed webapp on ipodtouch ?

    - by abhinav
    Hi, I have a wifi network at home with a couple of laptops. I am running a Tapestry webapp on my machine. I can access this webapp from the other laptop if I use the IP address of my machine (I mean enter something like : http://192.168.1.53:8080/webapp/index.html). Now, I also want to access the same webapp through my iPodTouch which is also in this wifi network. However, when I try to do so in Safari on iPodTouch, it fails. Could someone point out what's the problem here ? Thanks, Abhinav

    Read the article

  • Virtual box - How to add disks and move var, opt and home to them?

    - by Jarrod Roberson
    I created a CentOS 5.6 Guest OS Virtual Machine. I made the first disk 10GB, I am rapidly outgrowing it. It was suggested that I make disks for my /var, /opt and /home directories and move them so I can better manage the disks for backing up and what not. This sounds like a good idea. I know how to create the disks in Virtual Box. I have dug around Google and the internet in general and all my attempts at doing this have failed. Snapshots are awesome! I can get the drives fdisked, and I have had limited success mounting them to /mnt/var, /mnt/home and /mnt/opt, but even in single user mode ( init 1 ) I can't get the entire contents of the directories to move over, and then the machine won't reboot correctly. cd /var cp * -ax /mnt/var The /var directory in particular is not wanting to move everything to the new location. How do I format, mount and move the /var, /opt and /home to my new disks?

    Read the article

< Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >