Search Results

Search found 38282 results on 1532 pages for 'ubuntu 12 04'.

Page 214/1532 | < Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >

• Ubuntu unstable, showing awkward behavior

  - by Christophe De Troyer

  Let me start off by saying that this problem can't be described in such a way that allows me to find other topics, which have some relevance to this problem. That's why I created this question. In case this question might have been asked before, I apologize. So what is the problem: My computer (Intel Core I5 2500K - with HD3000 graphics -, 6 gb DDR, 1 SSD, 3 HDD's and an Asus P8Z68 mobo) runs Windows on the SDD. But I decided to give Ubuntu a chance to be my daily OS for basic needs since it's open source and I find it a handicap of not being able to work with it. I decided to run the windows installer and install Ubuntu 12.04 to my 320 Gb hdd which was not being used in my computer. After installing it and booting it, it worked great! I spent the rest of the day/night using it, and falling for it. Great, today I booted Ubuntu (I had the choice in the bootloader as I expected). It asked me for my login and it started logging in. Now, after a few (literally) minutes of letting it "boot" I tried determining the cause of this. What I've figured out so far: When I left click on my desktop it freezes completely for a few seconds I have something like tearing in the left side menu (in games, you know) when I move my mouse around It runs well when just hovering around with my mouse, but from the point I click on something it freezes. What have I tried? I ran a HD Tune diagnostic on the HDD but the performance seems to be very close to the stock values, so I'm taking it as a good HDD. I'm trying to get to the drivers update panel for Ubuntu, but with the state it's in, it's taking a lot of time.. Could anyone point me in a direction for troubleshooting this? I'm not really a noob at all, just when using Linux.. :) Thanks in advance! Christophe,

  Read the article

• Read only file system error on ubuntu after partitioning

  - by Ranjith R

  I am not sure if I am the root cause of this problem but this is what I did: I wanted latest ubuntu and latest linux mint together on my thinkpad laptop. Windows 7 was already there. I already had mint. So I put in the USB with ubuntu image and started installing ubuntu. I chose to install side by side. It was taking a long time to finish defragmenting and partitioning. I decided to give up as I became a little impatient and I pressed the skip button. After the skipping, I realized that the partitioning was complete and went ahead with installing ubuntu. Now the linux mint OS starts reporting the file system as read only at least once every day and I have restart and tell the OS to fix errors in hard disk. After I press F key, the system fixes the issues, restarts and all is well again. Is there some way to fix the issue permanently. I think reinstalling will solve the issues, but I can not do it as I have a lot of data and I will have reinstall and configure a lot of softwares that I use daily. I checked the smart check in disk utility and the hard disk seems to be fine Also I checked both the partitions for errors with disk utility and the report says they are fine. Is there something I can do before I reinstall?

  Read the article

• Ubuntu Desktop does not load

  - by Niklas

  If I login on my Ubuntu 14.04, I get the following desktop: This weird behavior appeared after I executed sudo apt-get update && sudo apt-get upgrade and restarted my computer. Don't know why though. To my Ubuntu I have tried the following (nothing seems to work so far) Fix any broken packages: sudo apt-get update sudo apt-get autoclean sudo apt-get clean sudo apt-get autoremove Locate any broken packages and reinstall them: sudo apt-get install debsums sudo apt-get clean sudo debsums_init sudo debsums -cs sudo apt-get install --reinstall $(sudo dpkg -S $(sudo debsums -c) | cut -d : -f 1 | sort -u) Removing some compiz files: rm -r ~/.cache/compizconfig-1 rm -r ~/.compiz Purging of NVIDIA and installing NVIDIA-prime: sudo apt-get install --reinstall ubuntu-desktop sudo apt-get install unity sudo apt-get purge nvidia* bumblebee* sudo apt-get install nvidia-prime sudo shutdown -r now Compizconfig Settings Manager: sudo apt-get install compizconfig-settings-manager export DISPLAY=:0 ccsm // Back to UI and enablement of Unity Plugin Unity replace, which stopped at a while and did nothing afterwards unity --replace Some dconf reset dconf reset -f /org/compiz/ unity --reset-icons &disown Actually dconf did not work and I got this error: error: Cannot autolaunch D-Bus without X11 $DISPLAY Can anybody help me on that? This is my hardware (hope it helps in any way): Intel® Core™ i7-3770 ASUS GTX660TI-DC2-OG-2GD5 (NVIDIA driver is/was installed) ASUS P8Z77-V LX Corsair DIMM 8 GB DDR3-1600 Kit Samsung 830series 2,5" 256 GB (Windows is installed here) Seagate ST31000524AS 1 TB (3/4 are reserved for files; 1/4 is for Ubuntu (16GB swap included))

  Read the article

• apt-get upgrade stuck at the same package

  - by decibyte

  Current status I've started to suspect this is not an Ubuntu issue, but related to the internet connection here at my work. Until I'm sure, Im leaving my question below: Original question I'm stuck, can't upgrade my system. Running sudo apt-get upgrade gives me the following: mmm@alalunga:~$ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done The following packages have been kept back: ginn libgrip0 linux-generic-pae linux-headers-generic-pae linux-image-generic-pae The following packages will be upgraded: apport apport-gtk bind9-host build-essential dhcp3-client dhcp3-common dnsutils eog evince evince-common firefox firefox-branding firefox-dbg firefox-globalmenu firefox-gnome-support firefox-locale-en gimp gimp-data gir1.2-totem-1.0 glib-networking glib-networking-common glib-networking-services gnupg gpgv icedtea-6-jre-cacao icedtea-6-jre-jamvm icedtea-6-plugin icedtea-netx icedtea-netx-common icedtea-plugin isc-dhcp-client isc-dhcp-common libapache2-mod-php5 libart-2.0-2 libbind9-80 libdns81 libevince3-3 libgimp2.0 libisc83 libisccc80 libisccfg82 liblwres80 libssl-dev libssl-doc libssl1.0.0 libtotem0 linux-firmware linux-libc-dev openjdk-6-jre openjdk-6-jre-headless openjdk-6-jre-lib openssl php-pear php5-cli php5-common php5-curl php5-dev php5-gd php5-mysql php5-xsl policykit-1-gnome python-apport python-django python-gst0.10 python-problem-report resolvconf thunderbird thunderbird-globalmenu thunderbird-gnome-support totem totem-common totem-mozilla totem-plugins xserver-xorg-input-synaptics 74 upgraded, 0 newly installed, 0 to remove and 5 not upgraded. Need to get 317 MB/327 MB of archives. After this operation, 1.481 kB of additional disk space will be used. Do you want to continue [Y/n]? Get:1 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:2 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:3 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:4 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:5 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:6 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:7 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] 9% [7 openjdk-6-jre-headless 27,3 MB/27,3 MB 100%] It keeps downloading the package openjdk-6-jre-headless, then does nothing for a while (hanging on what's the last line above), then download the package again. It's at its 13th download attempt at the moment of writing. The actual downloads seem to be done just fine, but whatever it does after downloading seems to be failing. I tried removing openjdk-6, but then it wanted to install openjdk-7 instead, with the same result, hanging at openjdk-7-jre-headless instead. I also tried changing servers from my local (Danish) to the main server. No luck. It's also keeping me from upgrading alle the other packages. What to do? Update After following instructions in the answer by @lpanebr, it is now stuck at the linux-firmware package. So, maybe it's a more general problem than being related to specific package(s)? Although it did download some packages without problems before getting stuck at linux-firmware.

  Read the article

• Cuda GeForce GT 555m (on Ubuntu 12.04 (Virtual Box))

  - by bobby

  I am running Ubuntu 12.04 in a Virtual Box as guest OS. Today I have tried to enable all functions of my graphic card under Ubuntu. But all my efforts were off the mark... because my experience with Linux is relatively small... I have tried the procedure which is described as in http://sn0v.wordpress.com/2012/05/11/installing-cuda-on-ubuntu-12-04/. Running the cuda-filepack always lead to an error like "installing driver canceled". Then I have tried to install the Bumblebee project. But I always get the error that the bumblebee daemon is not started. After some internet research I found a test-command lspci -nn | grep '[030[02]]' which results in 00:02.0 VGA compatible controller [0300]: InnoTek ... [80ee:beef] I've been trying to activate the card you for hours without success. Could you please give me some hints how to activate CUDA? Kind regards

  Read the article

• How to completely integrate Nemo with Ubuntu?

  - by user74660

  I have installed Nemo (a fork of Nautilus created by the Linux Mint Team) in my Ubuntu 12.04.1 LTS with Gnome Shell 3.4.2. I followed the instructions here (https://help.ubuntu.com/community/DefaultFileManager), changing the "inode" and "x-directory" in the file "defaults.list", to make Nemo my default file manager. Now everything works perfectly, except for one thing: opening folders from desktop. I have set the option "Have file manager handle the desktop" on. Cool. The problem is that the desktop seems to be handled by Nautilus only, even if I have set another file manager as default. Every time I double click a folder on the desktop, it is opened by Nautilus, not Nemo. Please, does anybody know how to fix this? Thanks for your time. :)

  Read the article

• Is it possible to extend partition in which I have installed Ubuntu

  - by Santosh

  Before installing my current Ubuntu Oneiric Ocelot I was having 3 partitions on my hard drive (each in NTFS, and divided in 21GBs, 10GBs and 37GBs; approx 80GB). I put in the DVD in DVD-ROM and booted up with it. I was prompt whether to install Ubuntu side by current operating system (Windows 7) or totally remove all operating system. I choose to install side by the current operating system. In next screen I took one of my partition (the one which was of 37GB) and totally formatted it. Then created a ext4 file system of 10GBs on it (here 'it' means partition that was of 37GB, not whole HDD). While proceeding I was asked to make swap partition so I created another swap partition of 5GBs. I have Ubuntu installed, but now I am regretting about that 10GB, I should have done it more since I have much more space on my hard drive. And I have 22GBs of my hard drive useless (neither it is in ntfs nor ext4). I want to increase the size of ext4 partition in which I have installed my Ubuntu; from 10GB to something more.

  Read the article

• Ubuntu cant load sound cart

  - by Reza Marefaty

  I have installed Ubuntu 12 and i cant see any volume controller on it and so no audio player can detect any sound card and nothing shown in system setting - sound - output tab. but i can see my hard ware by typing this command : aplay -l Return : List of PLAYBACK Hardware Devices ** card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: U0x4d90x20 [USB Device 0x4d9:0x20], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 How can i activate sound ? Edit : This info may helep for the solution : sudo lspci | grep Audio 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) 04:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cedar HDMI Audio [Radeon HD 5400/6300 Series]

  Read the article

• What hinders Ubuntu from getting traction in the professional field? [closed]

  - by Prasad

  If this is not the place to ask this, please forgive this Ubuntu cub, I want to ask, what do people do with Ubuntu? As an Ask Ubuntu user I can see that most of the users (including myself) are asking questions about entertainment related problems. Is that all? No commercial use with it? Do people make fun of Ubuntu or just pretending to be Ubuntu users and use Windows secretly? Please don't hate me or make fun of me, I know lots of people trying to make Ubuntu even better, and I know it's better than Windows (if Adobe software just work on Ubuntu, I won't see Windows logo on my monitor anymore). What hinders Ubuntu from getting traction in the professional field?

  Read the article

• Ubuntu 12.04, can't find my home wifi network

  - by Anton

  I've tried several solutions I found on the web, but didn't manage to solve a problem. Since today my laptop won't find my WiFi network, but neighbours' networks are suggested. Another laptop with U12.04 does find one. What do I do? I've Dell Latitude-E4310, 02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01) Subsystem: Dell Inspiron M5010 / XPS 8300 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f2c00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac Kernel modules: bcma, brcmsmac also NetworkManager Tool State: connected (global) - Device: eth1 ----------------------------------------------------------------- Type: 802.11 WiFi Driver: wl State: disconnected Default: no HW Address: 1C:65:9D:7A:45:5C Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Should I provide anything else? Many thanks in advance.

  Read the article

• My laptop with Linux/ Ubuntu isn't working

  - by Andy Campos

  I have a dell laptop with ubuntu linux. A day I tried to start it up and a black screen just appeared that says: GNU GRUB version1.98+20100804-5ubuntu3 (and these clickable options:) -Ubuntu, with Linux 2.6.35-22-generic -Ubuntu, with Linux 2.6.35-22-generic (recovery mode) -Memory test (memtest86+) -Memory test (memtest86+, serial console 115200) When I click the first one, a bunch of text appears like: mount: mounting /dev/disk/by-uuid/8396a225... failed: invalid argument mount: mounting /dev on /root/dev failed: no such file or directory mount: mounting /sys on /root/sys failed: no such file or directory mount: mounting /proc on /root/proc failed: no such file or directory Target file system doesn't have requested /sbin/init No init found. Try passing init= bootarg Enter 'help' for a list of built-in commands BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) (initramfs) When I enter 'help' a bunch more incomprehensible text appears. Whenever I press the enter key all that pops up is (intetramfs) If anyone can make rhyme or reason out of this please, please help me out so it can boot up normally and i can be set. If there's some kind of special code I have to type in or something I know nothing about computers.

  Read the article

• Failed to download repository information (Maveric)

  - by Rhiannon

  I have been through most of the duplicates for this question, and still can't find an answer. I may have missed one but hopefully this isn't a duplicate! Having a problem with updates. I get the "failed to download..."message followed by "Check your internet connection", which is clearing working fine as I am on it now. I click details and get the following **W:Failed to fetch http://archive.ubuntu.com/ubuntu/dists/maverick-updates/multiverse/source/Sources 404 Not Found [IP: 91.189.92.202 80] , W:Failed to fetch http://archive.ubuntu.com/ubuntu/dists/maverick-updates/universe/source/Sources 404 Not Found [IP: 91.189.92.202 80] , W:Failed to fetch http:// archive.ubuntu.com/ubuntu/dists/maverick-updates/multiverse/binary-i386/Packages 404 Not Found [IP: 91.189.92.202 80] , W:Failed to fetch http:// archive.ubuntu.com/ubuntu/dists/maverick-updates/universe/binary-i386/Packages 404 Not Found [IP: 91.189.92.202 80] , W:Failed to fetch http:// archive.ubuntu.com/ubuntu/dists/maverick-security/multiverse/source/Sources 404 Not Found [IP: 91.189.92.202 80] , W:Failed to fetch http:// archive.ubuntu.com/ubuntu/dists/maverick-security/universe/source/Sources 404 Not Found [IP: 91.189.92.202 80] , W:Failed to fetch http:// archive.ubuntu.com/ubuntu/dists/maverick-security/multiverse/binary-i386/Packages 404 Not Found [IP: 91.189.92.202 80] , W:Failed to fetch http:// archive.ubuntu.com/ubuntu/dists/maverick-security/universe/binary-i386/Packages 404 Not Found [IP: 91.189.92.202 80] , E:Some index files failed to download. They have been ignored, or old ones used instead.** All the faults have "maveric" somewhere in them, so I have gone to settings and unticked all the Mavarics I can find, but this problem is still happening. Any ideas? Many thanks

  Read the article

• Why does Ubuntu 13.10 not detect my Win7 partition?

  - by goutham

  I'm trying to install Ubuntu 13.10 alongside Windows 7 on my DELL INSPIRON 14z 5423 laptop and I'm new to all of this. I'm using the Ubuntu 13.10 64-bit ISO burned onto a CD. The first time I tried to install it, Ubuntu said it did not detect any other OS, which meant I only had 4 options: Erase disk and install Ubuntu (I don't want to do this) Encrypt new Ubuntu. Use LVM. Something else. If I choose the Something else option, it brings me to the partition menu and says that I have 1 disk with free space of (500Gb), but that's not true because I have Windows 7. I restarted the laptop several times and booted the CD again and I got exactly the same as I did previously. How do fix this problem and install Ubuntu alongside Windows 7? After executing "sudo fdisk -l" command in terminal ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 314574847 157184000 7 HPFS/NTFS/exFAT /dev/sda3 314574848 629147647 157286400 7 HPFS/NTFS/exFAT /dev/sda4 629147648 976771071 173811712 7 HPFS/NTFS/exFAT After removing one partition I executed command once again ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 629145599 314469376 7 HPFS/NTFS/exFAT /dev/sda3 629147648 976771071 173811712 7 HPFS/NTFS/exFAT

  Read the article

• Ubuntu won't fit 10" netbook's native display

  - by Daniel

  I recently removed Windows 7 Starter from my netbook, and replaced it with Ubuntu 12.10. The problem is some bits of the system doesn't fit the native display resolution of 1024x600 i.e. the bottom bits of Ubuntu is hidden beneath the screen & the only 2 available resolutions are: the default 1024x768 and 800x600. I've also thought about replacing Ubuntu with Lubuntu or Puppy Linux, as the system does run a bit slow, but I can't, as then I won't be able to access the taskbar and application menu which will be hidden beneath the screen. Only Ubuntu with Unity is currently usable, as I can see the Unity Launcher. My Netbook model is HP Mini 210-1004sa, which comes with Intel Graphics Media Accelerator 3150, and has a display 10.1" Active Matrix Colour TFT 1024 x 600. I was able to define a custom resolution 1024x600 using the Q&A: How set my monitor resolution? but when I set that resolution, the desktop area is lowered, with bits of it hidden beneath the screen; & there's a black space left at the top of the screen. I had to revert to the old setting 1024x768 to push the desktop upwards and remove the black space.

  Read the article

• System Slow After Uprading Ubuntu

  - by Aragon N

  i have an ubuntu network machine which has release of 10.04.1 LTS Lucid. on this system i have apache, postgresql and django. for some app. development i have to install php and php-curl... due to being on network, i have exported wmvare machine to internet and firstly i have upgraded system and then install php5 packages on it. After all replacing it with its old place, i have considered that the new system query is some slow according to another. Old system query time : 140 ms New system query time : 9.11 s i have checked /etc/network interface and it seems there is no problem. i have checked /etc/resolv.conf and it seems ok i have checked /etc/nsswitch.conf and only host section is different from old one which old system has hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4 and then i have checked time host -t A services.myapp.com and i got real 0m0.355s user 0m0.010s sys 0m0.020s and now what can i have to check for boosting my system as before?

  Read the article

• mdadm: brakes boot due to "is not ready yet or not present" error

  - by BarsMonster

  This is so damn frustrating :-| I've spent like 20 hours on this nice error, and seems like dozens of people over Internet too, and no clear solution yet. I have non-system RAID-5 of 5 disks, and it's fine. But during boot up it says that "/dev/md0 is not ready yet or not present" and asks to press 'S'. Very nice for Ubuntu Server - I have to bring monitor and keyboard to go next. After this system boots and it's all fine. md0 device works, /proc/mdstat is fine. When I do mount -a - it mounts this array without errors and works fine. As a dumb and shameful workaround I added noauto in /etc/fstab, and did mounting in /etc/rc.local - it works fine then. Any hints how to make it work properly? fstab: UUID=3588dfed-47ae-4c32-9855-2d69df713b86 /var/bigfatdisk ext4 noauto,noatime,data=writeback,barrier=0,nobh,commit=5 0 0 mdadm config: It is autogenerated: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR CENSORED # definitions of existing MD arrays ARRAY /dev/md/0 metadata=1.2 bitmap=/var/md0_intent UUID=efccbeb6:a0a65cd6:470dcdf3:62781188 name=LBox2:0 # This file was auto-generated on Mon, 10 Jan 2011 04:06:55 +0200 # by mkconf 3.1.2-2

  Read the article

• Force startx to run X in a specific resolution and refresh Rate

  - by Z9iT

  From my past experience (using Win-Xp), this particular monitor works only on 60Hz , Best resolution being 1024x768. I have "installed and configured" Ubuntu 12.04 Minimal (on USB stick) so that most of the time terminal is used, however, whenever there is a need to enter GUI, I may issue startx command to go into gnome. However the problem is that on this particular system, issuing this command poses problem because its default refresh rate won't synchronize with the monitor. The display keep on flickering and utterly unreadable. It is visible that gnome has been loaded and default wallpaper and desktop items are visible. But the problem is due to refresh rate different than 60Hz. I am looking for a command attribute to startx command which will force the refresh rate to 60Hz and resolution preferably to 1204x768 I can open terminals with Ctrl+Alt+T and enter commands. Key combinations like Ctrl+Alt+NumPlus works flawlessly in distributions like solaris, but it's not working for me. Also the commands like xrandr -r 60 60 being refresh rate wont work. The same problem is faced even when I boot from a live CD

  Read the article

• accessing live usb files from new hd ubuntu install

  - by Robin Bailey

  After my live USB (ubuntu 12.04 lts) refused to boot, I proceeded to install the same Ubuntu version on the laptop hard drive (a dual boot next to Win xp). This all went well without a hitch. Previous to this, I spent several weeks enjoying and exploring ubuntu from the usb pendrive. During this time I changed lots of settings and customized Firefox and more. Now, I'd like to import the home folder from the usb drive into the new install home folder on the hard disk, which is the purported folder that holds all those special settings to my knowledge. Unfortunately and only being familiar with Windows file systems, the view of the usb file system from the new hdd install is totally perplexing. I can't find anything that looks anywhere close to the original file system. More, I can't find any of the files I had created and stored there, like the LibreOfficeCalc file that has all my passwords (this one is really discouraging) that was stored on the ubuntu desktop. Help me find this file alone and I'll bow down with full apologies to any and all computer gods. Being able to import all those customizing settings into the new install would be a major bonus also, but hey, I'm not greedy. I'll take the passwords file and be happy! And humble! I would be very grateful for some clear, understandable help on this. Thanks

  Read the article

• Ubuntu 13.04 to 13.10: Filesystem check or mount failed

  - by SamHuckaby

  I attempted to upgrade from Ubuntu 13.04 to 13.10 today, and mid upgrade the system started flaking out, and eventually locked up entirely. I was forced to restart the computer, and am now unable to get the computer to boot up at all. When I boot currently, it takes me to the GRUB menu, and I can choose to boot normally, or boot in an older version. I have tried several things, which I list below, but no matter what, when I try to finish booting into Ubuntu, I receive the following error: Filesystem check or mount failed. A maintenance shell will now be started. CONTROL-D will terminate this shell and continue booting after re-trying filesystems. Any further errors will be ignored root@ubuntu-computername:~# I have fun fsck -f and everything appears correct, no errors are reported. and it passes all 5 checks. If I run fdisk -l then I get the following information: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes Disk identifier: 0x00010824 Device Boot Start End Blocks Id System /dev/sda1 * 2048 608456703 304227328 83 Linux /dev/sda2 608458750 625141759 8341505 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 608458752 625141759 8341504 82 Linux swap / Solaris Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0fb4b7e8 Device Boot Start End Blocks Id System /dev/sdb1 8192 625139711 312565760 7 HPFS/NTFS/exFAT I am considering just installing a new OS on the other disk, that currently has nothing on it, and then just attempting to scrape my data off the old disk (thankfully I didn't encrypt the files). Really my question is this: Can I salvage this Ubuntu install, or should I give up and just reinstall?

  Read the article

• Ubuntu 13.04 alongside Windows 8 - How to partition from Windows

  - by mengelkoch

  I plan to install Ubuntu 13.04 alongside Windows 8, and I'm looking for a CLEAR answer on how to conduct partitioning appropriately. I'm very new to all of this so a thorough explanation with minimal jargon would be great. I have an Acer Aspire M5 x64 with 6G RAM. I think I already figured out how to deal with the fast startup, UEFI and SecureBoot issues (I disabled fast startup and disabled Secure Boot). I am able to boot into Ubuntu from a LiveUSB, and I think I am ready to install Ubuntu. Note - despite some advice found here, I do have to disable SecureBoot to boot 13.04 from my LiveUSB. From what I have read here, it seems that I should (at least at first) create the partitions from WITHIN Windows 8, not from the LiveUSB, to avoid reported problems. I have run compmgmt.msc and I see the existing partitions. I see the following: Disk 0: 400 MB Recovery; 300 MB EFI System; Acer (C:) 444.95 GB (Boot, Page File, Crash Dump, Primary Partition); 20 GB Recovery Disk 1: 3.74 GB Primary Partition; 14.90 GB Primary Partition I gather I need to create a mounting point '/' Partition (??), a swap partition, and a home partition. Please explain what these are, how big they should be, how I create them from Windows Disk Management, and anything else I need to know. Eventually, I plan to fully replace Windows 8 with Ubuntu, but for now I want to run alongside Windows 8 and not screw things up. I don't have any critical files saved on this computer yet. Thanks.

  Read the article

• How to diagnose Ubuntu CPU spikes / IO wait?

  - by Jeff Welling

  I'm using Ubuntu and every couple minutes it goes unresponsive for a half second to a full second, which isn't normally a problem but makes trying to code extremely frustrating when your trying to hit backspace or navigate the code and nothing is happening. The problem is, the freezes are so brief that top doesn't have time to show me what is spiking the CPU (assuming something is, but I don't know what else could cause this). Does anyone know how to troubleshoot this performance issue? Edit: I've tried login in with Gnome Classic (No Effects) instead of Unity but it still freezes up every once in awhile. Edit: The CPU graph doesn't seem to be showing any actual spikes so it seems you were right and my original diagnosis of CPU spikes being the problem was incorrect, I now suspect IO wait. I don't recall this happening for the brief few weeks I had Windows 7 Starter running on it though, which leads me to believe it isn't (just?) the hardware.. is there anything I can tweak to improve this? I'm using an Acer Aspire One D257, with Ubuntu 11.10. Edit: Output of dmesg is at http://paste.ubuntu.com/1060054/ and kern.log is at http://paste.ubuntu.com/1060055/

  Read the article

• GNOME changes to KDE on Maverick

  - by Pit

  Hi, I recently made a clean/fresh install of Ubuntu 10.10 an experienced the problem that the theme changes from Gnome to KDE and back randomly and partly. Sometimes after starting my computer I will have a KDE theme. If I then open the Appearance Preferences ( System - Preferences - Appearance ) some applications and the main-menu as well as menu of applications (only upper two centimetres of a application window) will change back to Gnome only by opening it, not changing anything nor saving. I did not choose KDE at any time, nor did I do any changes to the appearance prior to the first occurrence of this bug. On a second computer I updated from 10.04 to 10.10 and experienced the same bug. On this computer I did however change the layout of the minimize;maximise;close buttons by following How do I move the Window buttons from left to right?. But I don't see how this could provoke the bug, especially as it occurs on a second computer. Will doing updates I saw that there a quite a lot of KDE packages being downloaded. Do I even need those if I don't want to use KDE?

  Read the article

• Problem graphics with ATI Radeon x1270 (RS690M) on Ubuntu 12.04

  - by Giuseppe Della Corte

  I'm Italian and so I apologize for my English! I'm a beginner to Ubuntu and I tried it on my desktop PC and it's fantastic, fast and fun! I decided to try it on my netbook Packard Bell DOT M/A and this is the configuration: AMD Athlon L110 1.2GHz 2GB of RAM ATI Radeon x1270 (RS690M) 150GB Hard Disk I installed Ubuntu 12.04 with Wubi (dualboot Windows 7 + Ubuntu 12.04), because the netbook does not have a DVD player! During the installation everything is OK, after it was installed I see mistakes in the graphical display! I see objects that are seen in different colors and moving (buttons, mouse pointer, text bar ... etc ...) At one point came not to see anything, such as this screenshot: The drivers are open, that is already installed in Ubuntu. Windows 7 video card runs fine, can run well Aero (transparent window effects), I can watch movies in HD and play some games with the Catalyst drivers from AMD. Now I ask a favor, you can help me solve this problem? Is there a fix for this driver or drivers different on the Internet? Thanks for your attention, good bye!

  Read the article

• Installing Ubuntu on virtualbox with a windows 8 host

  - by ubershmekel

  Installing ubuntu-13.10-desktop-i386.iso gets me to the graphical login screen but after I enter the password I get a black screen. Ctrl-Alt-F2 brings me to a terminal where I can restart lightdm, enter my password again to see another black screen. The screen saver can actually kick into action there and I was told to update packages, but no unity or other ui, just blackenss. The host is windows8-x64 and Virtualbox 4.3.2. I tried installing ubuntu-12.04.3-desktop-i386.iso but that hung during setup. Is there a way to debug? I'm now trying to install Debian to see if that works but wow the network installer takes its sweet time... Update: Debian does work though it gives me a notification that Gnome 3 failed to load. The visual desktop works though so I don't know if there was a substantive problem.

  Read the article

• Load balancing on Ubuntu Server

  - by SabreWolfy

  I have Ubuntu 10.04.4 server (32-bit) installed on a headless quad-core machine with 2GB RAM. I'm running a command-line analysis which is analyzing a large amount of data, but which does not require a large amount of RAM. The tool does not provide any multi-threading, so the CPU load is sitting at 1.00 (or sometimes just a little over). I ran top and pressed 1 to see the load on each of the cores and noticed that "Cpu1" is always running at 100%. I thought that the load would be distributed between the cores, rather than loading one core all the time. I'm sure I've seen this load-balancing behaviour before in Ubuntu or Debian Desktop versions. Why would the Server edition work differently? The analysis will likely take several hours to run, so loading one core at 100% for many hours while the other 3 remain idle is surely not the best approach?

  Read the article

< Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >