Search Results

Search found 10603 results on 425 pages for 'device emulation'.

Page 215/425 | < Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >

• can someone explain IOSTAT ouput?

  - by user37197

  i'am having IBM server with Redhat 5 ElsmP connected to the IBM Storage over iSCSI (in sdb ) can someone explain this output from iostat command avg-cpu: %user %nice %system %iowait %steal %idle 12.79 0.01 4.53 72.22 0.00 10.45 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 95.63 48.88 240.95 485589164 2393706728 sdb 29.20 350.49 402.08 3481983365 3994494696 move large file to sdb very slowly,it seem normaly?

  Read the article

• Does a USB hub affect performance?

  - by user1018733

  I have two devices I want maximum throughput and latency with. (Midi drums and midi keyboard for example) Would connecting both to the same USB port via a hub effectively limit the maximum data transfer rate to 1/2 to each of them? I am assuming yes, but I didn't know if USB hubs had a handshaking and priority giving protocol available (e.g. let the device with the longer built up buffer of data communicate first) Thanks

  Read the article

• Error 5 partition table invalid or corrupt

  - by Clodoaldo

  I'm trying to add a second SSD to a Centos 6 system. But I get the Error 5 partition table invalid or corrupt at boot. The system already has a single SSD (sdb) and a pair of HDDs (sd{a,c}) in a RAID 1 array from where it boots. It is as if the new SSD assumes one of the devices of the RAID array. Is it? How to avoid that or rearrange the setup? # cat fstab UUID=967b4035-782d-4c66-b22f-50244fe970ca / ext4 defaults 1 1 UUID=86fd06e9-cdc9-4166-ba9f-c237cfc43e02 /boot ext4 defaults 1 2 UUID=72552a7a-d8ae-4f0a-8917-b75a6239ce9f /ssd ext4 discard,relatime 1 2 UUID=8000e5e6-caa2-4765-94f8-9caeb2bda26e swap swap defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 # ll /dev/disk/by-id/ total 0 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 ata-OCZ-VERTEX3_OCZ-43DSRFTNCLE9ZJXX -> ../../sdb lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-OCZ-VERTEX3_OCZ-43DSRFTNCLE9ZJXX-part1 -> ../../sdb1 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 ata-ST3500413AS_5VMT49E3 -> ../../sdc lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMT49E3-part1 -> ../../sdc1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMT49E3-part2 -> ../../sdc2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMT49E3-part3 -> ../../sdc3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 ata-ST3500413AS_5VMTJNAJ -> ../../sda lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMTJNAJ-part1 -> ../../sda1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMTJNAJ-part2 -> ../../sda2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMTJNAJ-part3 -> ../../sda3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-name-localhost.localdomain:0 -> ../../md0 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-name-localhost.localdomain:1 -> ../../md1 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-name-localhost.localdomain:2 -> ../../md2 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-uuid-a04d7241:8da6023e:f9004352:107a923a -> ../../md1 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-uuid-a22c43b9:f1954990:d3ddda5e:f9aff3c9 -> ../../md0 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-uuid-f403a2d0:447803b5:66edba73:569f8305 -> ../../md2 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 scsi-SATA_OCZ-VERTEX3_OCZ-43DSRFTNCLE9ZJXX -> ../../sdb lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_OCZ-VERTEX3_OCZ-43DSRFTNCLE9ZJXX-part1 -> ../../sdb1 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMT49E3 -> ../../sdc lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMT49E3-part1 -> ../../sdc1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMT49E3-part2 -> ../../sdc2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMT49E3-part3 -> ../../sdc3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMTJNAJ -> ../../sda lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMTJNAJ-part1 -> ../../sda1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMTJNAJ-part2 -> ../../sda2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMTJNAJ-part3 -> ../../sda3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 wwn-0x5000c500383621ff -> ../../sdc lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c500383621ff-part1 -> ../../sdc1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c500383621ff-part2 -> ../../sdc2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c500383621ff-part3 -> ../../sdc3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 wwn-0x5000c5003838b2e7 -> ../../sda lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c5003838b2e7-part1 -> ../../sda1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c5003838b2e7-part2 -> ../../sda2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c5003838b2e7-part3 -> ../../sda3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 wwn-0x5e83a97f592139d6 -> ../../sdb lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5e83a97f592139d6-part1 -> ../../sdb1 # fdisk -l Disk /dev/sdb: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x79298ec9 Device Boot Start End Blocks Id System /dev/sdb1 1 14594 117219328 83 Linux Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d99de Device Boot Start End Blocks Id System /dev/sdc1 1 1275 10240000 fd Linux raid autodetect /dev/sdc2 * 1275 1339 512000 fd Linux raid autodetect /dev/sdc3 1339 60802 477633536 fd Linux raid autodetect Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000b3327 Device Boot Start End Blocks Id System /dev/sda1 1 1275 10240000 fd Linux raid autodetect /dev/sda2 * 1275 1339 512000 fd Linux raid autodetect /dev/sda3 1339 60802 477633536 fd Linux raid autodetect Disk /dev/md0: 10.5 GB, 10484641792 bytes 2 heads, 4 sectors/track, 2559727 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Disk /dev/md2: 489.1 GB, 489095557120 bytes 2 heads, 4 sectors/track, 119408095 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md2 doesn't contain a valid partition table Disk /dev/md1: 524 MB, 524275712 bytes 2 heads, 4 sectors/track, 127997 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md1 doesn't contain a valid partition table # cat /etc/grub.conf default=0 timeout=5 splashimage=(hd2,1)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.32-220.17.1.el6.x86_64) root (hd2,1) kernel /vmlinuz-2.6.32-220.17.1.el6.x86_64 ro root=UUID=967b4035-782d-4c66-b22f-50244fe970ca rd_MD_UUID=f403a2d0:447803b5:66edba73:569f8305 rd_MD_UUID=a22c43b9:f1954990:d3ddda5e:f9aff3c9 rd_NO_LUKS rd_NO_LVM rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=br-abnt2 crashkernel=auto rhgb quiet initrd /initramfs-2.6.32-220.17.1.el6.x86_64.img

  Read the article

• What process is making that sound?

  - by harschware

  My Windows 7 system makes an intermittent ding sound (like a single chime, or bell). I don't know which process does it. So, my question is: Is there software out there that can tell me which processes are currently sending output to the sound device?

  Read the article

• How to mount LUKS partition securely on server

  - by Ency

  I'm curious if it is possible to mount a partition encrypted by cryptsetup with LUKS securely and automatically on Ubuntu 10.0.4 LTS. For example, if I use the key for the encrypted partition, than that key has to be presented on a device that is not encrypted and if someone steals my disk they'll be able to find the key and decrypt the partition. Is there any safe way to mount an encrypted partition? If not, does anything exist to do what I want?

  Read the article

• Tversity DNLA services with Xbox 360

  - by NoCarrier

  I'm hosting a Tversity instance on my Windows 2008 server and sharing some media. My PS3 detects this as a DNLA device and can play back the media just fine. Tversity shows up on my Xbox 360, but when i click on it, it just loads and loads and after a minute it times out and tells me it can't connect. Has anyone successfully gotten this working?

  Read the article

• How to get a Cisco VPN 3000 config as text?

  - by Steven

  We would like to get a Cisco VPN device 3000 series configuration as a text file to look at the actual configuration, but apparently the interface is not a CLI but a graphical interface or menu driven. Is there a way to get access to the complete config as a text? And to copy and paste it to a text file?

  Read the article

• Enabling "USB Printing Support" in Windows 7

  - by Kevin Dente

  I'm trying to use an old parallel-port based printer with a USB-to-parallel port adapter on Windows 7. When I plug it into the USB port on the computer it's listed as an unrecognized device. I know that these cables typically use the "USB Printing Support" driver with makes USB ports show up as printer ports in the printer dialog. Is there a way to manually add USB Printing Support to Windows 7, since it isn't being added automatically?

  Read the article

• Is it possible to use a PC as a external drive via USB?

  - by homemdelata

  I have a bluray player that has a USB interface that allows me to plug external hard drives and pendrives for me to play movies or music files. I was wondering if it's possible to have the PC or notebook or any other computer-like device using a USB-USB cable and make the bluray player detects this as an external drive. Note: I'm using a bluray player as example but it can be the same for DVD players, TV or sound sytems.

  Read the article

• Store ESX5 images on a NAS?

  - by Cylindric

  I have a basic NAS device (Buffallo LinkStation Duo) that can only present SMB fileshares to the network. For testing annd for getting a dying physical machine working I would like to store my VMDK on here. Is that possible, or will I have to find some way of presenting this as an iSCSI target of some sort? I've only used iSCSI or local storage in the past, but this isn't possible at the moment. Thanks.

  Read the article

• ESX guest machine floppy drives

  - by warren

  What purpose does having a virtual floppy drive on a guest in ESX serve? Is there a way to configure ESX by default to NOT include such a device? It's annoying to have to remove it by hand once a new VM is ready to be provisioned.

  Read the article

• How does google maps know my current location on my iTouch?

  - by Tommy

  Using only my home wi-fi, how is google maps able to locate my current position? I know the device doesn't have gps. Also no cellular data to triangulate. I read about skyhook that has a db of popular wifi hot spots but I doubt my house is listed. Any information is appreciated. Thanks

  Read the article

• Configuring an EH-WIC Card on Cisco 1941 Router

  - by Olanrewaju T

  I have a Cisco 1941 Router that has just two ports for Gigabit connection but wanted more so I got a four port Cisco EH-WIC Card and connected it to it. I have been trying to assign IP address to the port GigabitEtnernet 0/0/0 because I have a cable already connected to it whose device I want it facing the router directly because I dont want to NAT its address. I want to assign the physical address on the port. Kinldy help if you understand what I am saying. Regards

  Read the article

• Maximum number of hard drives in a build-your-own NAS solution [closed]

  - by groovehunter

  My IT department has a bunch of older 160/320GB Drives. I'd like to use them in a build-your-own NAS device. What limitations exist in regards to the maximum number of drives that can be connected to typical commodity hardware that might be used in a situation like this? EDIT okay I like to specify my question is what to search for to find a storage controller which can handle many drives. I simply cannot find the right search terms.

  Read the article

• How to flip video feed that's presented upside down?

  - by Zuul

  Skype an other applications running under windows 7 Ultimate are presenting the video captured from the laptop built-in webcam upside down. I've tried many solution that I was able to find regarding issues like this, but to no avail. Some of the most relevant are discussed here: From Skype Support Network, the thread why is my video image of myself upside-down??? From ASUSTek Forums, the thread Built-in camera upside down Both present several potential solutions to this issue, but I've been unable to fix it for the laptop ASUS U6S. What I've already tried: Changing Drivers The driver that works must be the one from Windows, all others available from ASUS drivers either don't install or install but the webcam doesn't provide any video feed. This disallows all options that concern using an older driver or editing the .inf file as to manually adjust the settings. ASUS does not provide drivers for Windows 7, so I've used drivers from Windows Vista 32 Bit. Using the application manycam This application actually solves the issue (temporarily), but creates new ones: If I use the application to flip the video feed, Skype video call cease to work. This application doesn't save the settings, at least I wasn't able to find any way to save the settings I've used to flip the video feed. A computer restart brings all back to how it was, video feed upside down and if the application is still installed, Skype continues to fail on video calls. Regedit I've searched thru Windows Registry Editor as to find any reference to the webcam settings, hopping to find a key with the Flip parameter, since it's up to the driver to flip the image (by what I could ascertain from this problem). Couldn't find any reference to such settings, either they actually don't exist within the Windows Registry or they use some weird name that I could think off. System Configuration I was able to access the webcam system settings from the Windows Device Manager, but the tab that actually has the Image Rotation setting is always disabled. The same goes for the settings available from the Skype webcam options (that essentially is presenting the same settings as Windows Device Manager, just within a custom Skype pop-up). Question: How can I flip the video feed from the laptop's built-in webcam, as to properly see and broadcast the video?

  Read the article

• Is there an equivalent to Airfoil available for Linux?

  - by Chris Adams

  Hi there, I just stumbled across this Airfoil on Mac OS X, which lets me 'throw' music from my laptop to any other linux machine, iPhone or other device hooked up to a better set of speakers than my laptop - here's the page below: http://www.rogueamoeba.com/airfoil/mac/ What tools would I use to recreate this functionality on a linux box - are there any nice GUI interfaces to something like pulse audio (which is what I imagine I'd use ) for doing this? Thanks

  Read the article

• Symbol LL500 Scanner Interface Not Detected

  - by agentfll

  I have an old Symbol LL500 scanner interface box and a scanner to go with it. The box's original cable used one of the old microsoft mouse connectors, but I got a converter to USB. The problem is that when I connect it to my MacBook, the interface powers up and works, but the computer dosen't recognize it or even say that a device is connected. Is there any way to make it see that the interface is there or am I just screwed?

  Read the article

• why allow windows to disable one core? [closed]

  - by saber tabatabaee yazdi

  i teach MCITP for students and when describe about Disabling a Device Drivers , one of them ask me : why allow windows to disable drivers that windows need them? why windows allows to disable drivers, like disable cpu? like disabling graphic card? windows in many cases cant apply but allow to disabling CPU or etc. i am searching and find articles that describe how to disable CPU. but i am not Convinced WHY WE CAN DISABLE THESE drivers!!

  Read the article

• Networking Mac OS X 10.6 and Vista via ethernet?

  - by Moshe

  How can I make Vista home premium access OS X hard drive? and the other way around? I'd like to transfer files via direct ethernet. Plugging in an ethernet cable makes both computers recognize a network, but not the other device. Each firewall is turned off, but no luck. Edit: I don't see Windows Sharing in the Service Column.

  Read the article

• Can I disable the PNP functionality on Windows XP?

  - by Brad

  The reason I want to do this is most of the time I have the computer plugged into a 52" LCD in another room displaying information. Occasionally I need to update the software and to do so I need to see what I am doing so I plug a monitor in locally. Problem is that it automatically adopts the device capabilities of the new monitor and thus changing the settings for the large screen. I then have to go to a networked administration panel for the software to update the resolution settings.

  Read the article

• Enabling "USB Printing Support" in Windows 7

  - by Kevin Dente

  I'm trying to use an old parallel-port based printer with a USB-to-parallel port adapter on Windows 7. When I plug it into the USB port on the computer it's listed as an unrecognized device. I know that these cables typically use the "USB Printing Support" driver with makes USB ports show up as printer ports in the printer dialog. Is there a way to manually add USB Printing Support to Windows 7, since it isn't being added automatically?

  Read the article

• Where route to 169.254.0.0 comes from?

  - by jackhab

  Running CentOS 5.4 Why do I have route to 169.254.0.0 although it does not appear in Network Ethernet Device Route configuration dialog? Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 * 255.255.255.0 U 0 0 0 eth2 169.254.0.0 * 255.255.0.0 U 0 0 0 eth2 default 192.168.1.1 0.0.0.0 UG 0 0 0 eth2 Thanks.

  Read the article

• Windows 8 RP: Sync Apps' list

  - by Tural Teyyuboglu

  I'm testing windows 8 RP. Installed tens of apps from market. What I wanna know is, is there any way to save (or maybe sync with windows live account) installed app list, and install these saved applications in future - RTM version of OS? I mean, somehing like on Apples' devices - icloud features function that I'm talking about. You can install apps on iPhone and sync with iCloud account. Then you can re-install these apps on another device, which signed in with your login into icloud.

  Read the article

• Windows Server not installing audio drivers properly

  - by Adrian

  I am trying to install a dummy sound card on a Windows Server machine (in Amazon EC2 cloud) in order for one of my application to work. I'm trying to accomplish that with Virtual Audio Cable and REAUDIO3. Both tools managed to install a new device on my Windows XP machine, but on Windows Server, no new devices appear. Windows Audio and Plug and Play services are Started and Automatic. ANY ideas are greatly appreciated.

  Read the article

• Can not get sound over hdmi in kubuntu 9.10

  - by user32509

  I have used a hdmi cable to connect my lcd (which is connected with my speakers) with my nvida 275 gtx grafic card. I can not get the sound output to work. The hardware itself is working probably - I tested it under windows. Currently I am running Kubuntu 9.10 64 with Nvidia 190.53. The sound output worked fine before I installed the hdmi connection. (German output - i can change it, if you tell me how :)) aplay -l **** Liste von PLAYBACK Geräten **** Karte 0: Intel [HDA Intel], Gerät 0: ALC889A Analog [ALC889A Analog] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 Karte 0: Intel [HDA Intel], Gerät 1: ALC889A Digital [ALC889A Digital] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 aplay -L front:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog Front speakers surround40:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Intel,DEV=0 HDA Intel, ALC889A Digital IEC958 (S/PDIF) Digital Audio Output null Discard all samples (playback) or generate zero samples (capture) pulse Playback/recording through the PulseAudio sound server And i disabled mute in kmix an all channels :) Edit: lspci -v ... 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) Subsystem: Giga-byte Technology Device a022 Flags: bus master, fast devsel, latency 0, IRQ 22 Memory at ea400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel <?> Capabilities: [130] Root Complex Link <?> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel ... cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.20. lsmod | grep snd_hda_intel snd_hda_intel 31880 2 snd_hda_codec 87584 2 snd_hda_codec_realtek,snd_hda_intel snd_pcm 93160 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd 77096 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device snd_page_alloc 10928 2 snd_hda_intel,snd_pcm I think I am missing the something-hdmi module? Is there such a thing?

  Read the article

< Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >