Search Results

Search found 38126 results on 1526 pages for 'running'.

Page 216/1526 | < Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >

• Video card not detected in POST on initial boot.

  - by Jeff M

  I have a minor problem with my desktop computer after cleaning it out for dust. When I first boot up the computer, the video card does not get detected so I can't see anything. In POST, I'm getting the "can't detect video card" beeps. The boot sequence continues normally, just without video. However, if I restart it (using the restart button) anytime after POST, it would boot up normally. I have no reason to think that the motherboard, video card or PSU got damaged in the process. It was working fine before, works fine after resetting. Took all the necessary precautions while cleaning. On the initial boot, I can hear the video card's fan power up but immediately power down and try again one more time only to fail. After the beep, resetting gets everything running and sounding normally. I've reseated the card a couple of times and reset the BIOS but doesn't seem to help. I'm hoping I won't have to take it out and remove and reinstall everything again. Does anyone recognize these symptoms to know exactly what the problem is? My guess is that the video card isn't getting enough juice initially to be running stable to be detected. I just don't know what I did (or didn't do) to get it to be in this state. It's not a high priority thing for me at the moment, just means I have to always reset it after initially turning it on but will eventually remove everything and reinstall if it comes to that. I don't think the specs are relevant here but just in case, here's the relevant stuff: Motherboard: Gigabyte P35-DS3P Video: EVGA GeForce 8600 GTS PSU: Antec True Power Trio 650W Built ~2 years ago, still running well

  Read the article

• Windows 8.1 Upgrade: I have to run everything as administrator now?

  - by Robert Dailey

  I was running Windows 8 x64 Professional before and I never had to run programs as administrator to get them to function fully. Examples: Chrome OpenVPN GUI I always have my user under the local "Administrators" group and also disable UAC by putting the slider for it at the very bottom. This always did the trick. After the Windows 8.1 upgrade, I run into a few issues: Running Chrome normally, the Chrome icon doesn't appear in the taskbar. Chrome won't run in the background. OpenVPN GUI has errors when launching. Running both as administrator (Right Click Run as Administrator) fixes those issues and they run perfectly. What has changed in Windows 8.1 upgrade to cause these "problems"? I'm an advanced user, I don't want to have to worry about administrative rights. Any advice on how to fix these problems? EDIT I also get prompted for administrator permission to delete directories under "Program Files" now... that never used to happen before. I can hit Continue and it will allow me to delete, but just another symptom of the problem...

  Read the article

• Why can't I debug my ASP project through a remote desktop connection?

  - by Anthony Benavente

  I just asked this question in Stack Overflow but I figured this stack exchange forum is a better fit. It's been about a month of trying to figure out this problem and we've still not found a solution. We have about seven virtual machines on a server running Windows XP Professional w/ SP 3 all with Visual Studio Interdev and IIS 5.1 installed. Running the programs all work fine, but we just can't debug through remote desktop. When we are logged into the server console (through VM Sphere) and log into one of the virtual machines through there, we are able to debug properly. We figured the issue lies with some kind of permissions for Remote Desktop Users. We've tried nearly every article on the internet (exaggerating of course) and are about to give up hope. One more thing, when we are logged into the virtual machine through the server console and then remote in, the user that was logged into the console is kicked off but debugging works! Does remoting in trick the computer into giving us the correct permissions? I'm really not sure how it works. I know that this technology predates human history, but we are in the process of migrating from ASP Classic to ASP.NET Specs: - Windows XP Professional W/ SP3 - IIS 5.1 - Visual Studio 6 Interdev EDIT: By "debug" I mean running the project with breakpoints. Interdev doesn't stop at breakpoints.

  Read the article

• How to use a common library of environment variables among different languages?

  - by JDS

  We have three main languages with which we perform system tasks: Bash, Ruby, and PHP, and Perl. Four, four main languages. We use managed environment variables to provide authorization info that automated scripts need. For example, a mysql user account and password. We'd like to use one single managed file to maintain these variables. In some instances, for example, in cron, these environment variables are not available. They are made available in CLI scripts because we source the env file in everyone's profile. But something like cron doesn't do that. On the CLI, when the env file is sourced, any given script can access those variables. Bash has them directly, PHP in $_ENV, ruby in ENV, etc. We can't source the file into non-Bash scripts, because most languages implement shell commands by running them in a subshell. We considered parsing the Bash, converting to the script's lang, and running the equivalent of "exec(parsed_output)" on the resulting strings. What is a good solution to providing managed environment vars to scripts running in cron, or similar?

  Read the article

• Trouble getting started with the STEALTH monitoring package

  - by dlanced

  Is anyone here familiar with the Linux-based STEALTH package (for monitoring FS integrity of client systems)? I'm trying to get started with a very simple configuration, but I'm running into trouble (this is running under Ubuntu 14.04): Config line `USE BASE/root/stealth/10.0.0.79' invalid STEALTH (2.11.02) started at Fri, 30 May 2014 15:25:00 +0000 Program terminated due to non-zero exit value for -type f -exec /usr/bin/sha1sum {} \; (EOC Fri May 30 15:25:00 2014 127) Stealth is creating a binary tmp file in the Stealth server root and generating a "report" file in the start directory, but not much else. Regarding the "USE BASE...invalid" error, and just to be sure, I manually created the directories in /root, but it didn't help. And, by the way, I am running stealth with sudo. Everything seems to be configured correctly: I'm able to ssh into root@client from the stealth machine without a password Here's my "policy" file (I've removed the email directives just for simplicity): DEFINE SSHCMD /usr/bin/ssh [email protected] -T -q exec /bin/bash --noprofile DEFINE EXECSHA1 -xdev -perm +u+s,g+s ( -user root -or -group root ) \ -type f -exec /usr/bin/sha1sum {} \; USE BASE/root/stealth/10.0.0.79 USE SSH ${SSHCMD} USE DD /bin/dd USE DIFF /usr/bin/diff USE PIDFILE /var/run/stealth- USE REPORT report USE SH /bin/sh GET /usr/bin/sha1sum /root/tmp LABEL \nchecking the client's /usr/bin/find program CHECK LOG = remote/binfind /usr/bin/sha1sum /usr/bin/find LABEL \nsuid/sgid/executable files uid or gid root on the / partition CHECK LOG = remote/setuidgid /usr/bin/find / ${EXECSHA1} LABEL \nconfiguration files under /etc CHECK LOG = remote/etcfiles \ /usr/bin/find /etc -type f -not -perm /6111 \ -not -regex "/etc/(adjtime\|mtab)"\ -exec /usr/bin/sha1sum {} \; Any ideas? Thanks,

  Read the article

• Random and Selective ARP blindness in VMWare ESXi 4.1

  - by Peter Grace

  We have multiple VMWare ESX servers spread out amongst our company, doing various tasks. One particular ESXi host is exhibiting very peculiar behavior. We detect it when our monitoring system (Orion) notifies us that it can no longer ping the box. Upon jumping on the local console of the guest in question, we see that it cannot ping any new addresses that aren't already in its ARP table. At first we thought that the problem was just related to one of our guests, as the problem seemed to always happen to another guest, DevRedis. However, this afternoon the problem swapped and started happening on ApacheBox rather than DevRedis. When I have been fortunate to catch the problem, I have run tcpdump on both sides of the connection (one side being vmware, the other side being a physical webserver) and have noticed the following course of events: Guest ApacheBox sends an ARP request for the physical address of server WindowsBeast WindowsBeast tenders an ARP is-at back to the network indicating its physical mac address. ApacheBox never sees the ARP is-at response. The ESX host in question is running VMware ESXi, 4.1.0, 348481 The two guests (DevRedis and ApacheBox) are both running CentOS 6.3, however they are running two separate kernel versions ( 2.6.32-279.9.1.el6.x86_64 and 2.6.32-279.el6.x86_64 ) so I'm not entirely sure it's a CentOS problem. Does anyone have any thoughts on what might cause this? Has anyone run into it before?

  Read the article

• Can I boot up a virtual machine natively?

  - by Anshul

  My question is: Is is possible to run a virtual machine natively on your hardware if you have installed the proper drivers etc? In other words, can I use a VHD as a regular hard drive to boot from? The reason I want to do this is that I do both graphics-intensive and audio-intensive work, but my computer is not powerful enough to handle both at the same time and many times I install a bunch of audio programs that I don't want affecting the stability of my graphics programs. Basically I wanted to have sandboxing between the two sets of applications. So I tried running the graphics-intensive programs in a VirtualBox VM and the audio-intensive work natively (simply because it's a pain to route ASIO audio devices in/out of VirtualBox). This kind-of works - the graphics-intensive stuff is tolerable, but still relatively slow, because it's running inside a VM. So my next idea was to just dual-boot and install the graphics and audio programs in separate partitions but I frequently use them in tandem, so it wouldn't be practical to reboot my machine every time I need to use the other set of programs. But I could live with this scenario: If I need to do more audio-intensive stuff, I'll just boot up to the audio partition and run the graphics programs in a VM, and then when I'm working heavily on the graphics part, I'll just boot the graphics partition as a regular OS directly on the hardware. Is this possible? For example by booting up a VHD as a regular hard drive? Or by setting up dual-boot, and every time the audio partition is shut down, synchronize the graphics VM VHD with the native graphics partition? Is it practical, given the above scenario? And if it's not possible, barring buying another computer, can anyone suggest a best-of-all-worlds setup (the two worlds being performance, sandboxing, and running in parallel) for the above scenario? Thanks in advance.

  Read the article

• CPU operating temperature ranges

  - by osij2is

  I have an AMD Phenom II 960T with 2 cores unlocked for a total of 6 cores. I don't overclock at all. I have a Arctic Cooling ACALP64 Heatsink/Fan installed. I'm currently running ESXi 5.0 so I have to go into the BIOS to read the CPU temperatures, which at idle seem to be in the 71-74C range. To me, this is pretty high, but I cannot find any official temperature ranges that AMD says the CPU can work well within. There seems to be a lot of questions on superuser and numerous forums around CPU temperatures but no one seems to have a clear consensus as to what the manufacturer temperature ranges are for specific CPUs. I've tried searching through AMDs site to no avail. At this point, I'd be willing to shut off the 2 extra cores if it keeps the heat down but until I get some sort of tolerance or range for temperature, I have no idea if the CPU is being damaged or not. Can anyone point to a direct source, article, FAQ from AMD that specifically states their CPUs temperature range? Or are CPU temperature ranges so varying that there's no possible baseline? Am I being too paranoid about this? To me, anything over 65C is a bit much and if I'm in the low-mid 70s range with NO VMs running, what can I expect if I have several VMs running?

  Read the article

• How to turn off Windows Azure's "This copy of Windows is not genuine" message?

  - by Sid

  Is there any setting/configuration item to avoid Windows Azure from printing that error on the screen or detecting it? I've put a screenshot below that shows the message when you RDP into the web role. My web role runs on Windows Azure Guest OS 1.17 (variant of Windows Server 2008 SP2) Background: I was explaining our architecture to some outside engineers (NDA'd and all) and had to demystify the webrole as they were unfamiliar with Azure. I RDP'd into the VMs running the Web Role when one of their engineers gasped "are you guys running pirated copies of Windows in the cloud?" I also noticed that within the RDP screen, the Azure machines had "This copy of Windows is not genuine" on the bottom left corner. Now obviously, Microsoft is running their own OS in their own datacenter with no influence from me. So no 'piracy' here, despite that obvious warning. However, they seemed so distracted by this ("how can it be? really? hmmm?") that we wasted more time talking about it than the actual matter at work. Like I said, they have little exposure to Azure but have value add elsewhere. I want to get rid of this so I don't have to explain this in the future. PS Microsoft: If you're going to modify Windows Server <XYZ> into Windows Azure <A.B> , you should also modify the code that verifies product integrity.

  Read the article

• How to remotely connect using perfmon?

  - by user36914

  Suprised there is not a ton of information on google when i search for this but there is not. Lot of people asking the question but i none of them have any good answers. I have a remote computer running hyper-v (server) running a Windows 7 x64 guest (guest). Occasionally i won't be able to remote desktop to guest. I will then remote to server and see that the guest instance is constantly using about 25% of the cpu. WHen i try to connect directly from server i will get the login screen but as soon as i type the password in it will just stay at the windows 7 login screen but the account names will disappear and it will not log in. It responds to pings though. I don't know how else to diagnose other than trying to run perfmon remotely. It only happens like every 3 weeks and i run it 24/7. So i'm trying to run remote desktop remotely. I tested this out on a local vm i have running under vmware. When i try to connect using perfmon to my local vm i get this error: "when attempting to connect to the remote computer the4 following system error occurred: the network path was not found" I found in another past to start the remote registry service and when i start the service i get this error: "No such interface supported" Anyways, how do i remotely connect to another machine with perfmon or if anyone has a better idea how i can diagnose the problem above then let me know.

  Read the article

• How can I use an own asp page as 404 error page on a Windows 7 pro IIS 7.5 local installation

  - by Edelcom

  Running Windows 7 Pro Running local IIS 7.5 ( for web development purposes ) Edited hosts file to be able to use http://www.sitestepper.dev Site build in subfolder of the inetpub/wwwroot/staplijst Site can be viewed using http://www.sitestepper.dev/staplijst/whatever-page.htm I have an http://www.sitestepper.dev/p.asp page I would like to call when an unknown page is requested. This technique works fine on the deployed version of this web site ( deployed on an Windows 2003 server running IIS 7 - not sure about the 7 but it is the version deployed with Windows 2003 server ). I tried ( in the Edit Custom Error Dialog ) : Execute a URL on this site: with value /staplijst/p.asp and Respond with a 302 redirect: with value http://www.sitestepper.dev/staplijst/p.asp I tried this in the properties of the 'Default Web Site' , and I tried this at the staplijst level. Even tried it with values without the /staplijst. I restarted the default web site after each change. And even stopped/started the Web service. But nothing seems to work, I keep getting the 'Server Error In Application "DEFAULT WEB SITE"' , HTTP Error 404.0 error. What am I missing here - probably something obvious, but I don't see it ? Thanks in advance

  Read the article

• Php5-fpm Crash if much visitors

  - by chillah

  I decided to change my OP to Nginx from Litespeed because i read much about the low resource that Nginx would cost. Im running a Wordpress site with 500 users online My www.conf in "/etc/php5/fpm/pool.d" pm.max_children = 200 pm.start_servers = 20 pm.min_spare_servers = 20 pm.max_spare_servers = 60 ;pm.process_idle_timeout = 10s; ;pm.max_requests = 1000 Since i changed that config to higher requests and more children the Site needs longer till it shows me a White blank page. If i restart the php5-fpm prozess then, the site is running fine again. The CPU usage is at 5% if the php5-fpm is crashed and if its running its about 20 to 90%! Heres my Nginx.conf: user www-data; worker_processes 2; pid /var/run/nginx.pid; events { worker_connections 3048; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; # server_tokens off; I already tried changing the settings, tryed all variants but nothing worked. The Mashine: Dualcore 4gb ram

  Read the article

• Setting up /etc/network/interface file for KVM ubuntu 10.10

  - by Charles Thornton

  I am trying to setup KVM on Unbuntu 10.10 IFCONFIG DUMP: hydra(~}$ifconfig eth0 Link encap:Ethernet HWaddr 00:1b:fc:cb:77:eb inet addr:172.20.20.3 Bcast:172.20.20.255 Mask:255.255.255.0 inet6 addr: fe80::21b:fcff:fecb:77eb/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1345 errors:0 dropped:0 overruns:0 frame:0 TX packets:1541 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:820414 (820.4 KB) TX bytes:317708 (317.7 KB) Interrupt:23 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:480 (480.0 B) TX bytes:480 (480.0 B) virbr0 Link encap:Ethernet HWaddr 0a:1e:fb:b4:77:84 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 inet6 addr: fe80::81e:fbff:feb4:7784/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:56 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:8934 (8.9 KB) hydra(~}$ QUESTION:: How should /etc/network/interfaces be setup?? The following attempt just kills my internet connection! --------- /etc/network/interfaces ------------- # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address 172.20.20.3 netmask 255.255.255.0 network 172.20.20.0 broadcast 172.20.20.255 gateway 172.20.20.1 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off What am I doing wrong????

  Read the article

• How do I change the default ftp folder in MacOS X 10.6?

  - by Wild_Eep

  I'm running WordPress 2.9.1 from a Mac running 10.6.3. WordPress is installed to the /Library/WebServer/Documents folder. WordPress has a feature called AutoUpdate. Clicking an autoupdate button will download and install updated versions of the WordPress software, or third-party plugin tools. It's a convenient way to keep things up to date. WordPress uses FTP to download the files. I've enabled FTP and set up a user account and opened the requisite ports in my firewall for FTP traffic. This doesn't seem to be enough for my self-hosted installation, though. I'm sure this feature was originally designed for someone who has access to a remote shared webserver, and that it's merely a configuration challenge related to the FTP setup. I feel that if I can adjust the initial directory that the FTP service presents to the AutoUpdate feature, everything else will work properly. So, my question is, how do I adjust what folder is presented when a given user connects to a Mac running 10.6.3 via FTP?

  Read the article

• Java: compile and run hanging at command prompt

  - by dwwilson66

  I'm having an issue that I'm hoping someone can help with. I'm working on netbook running WinXP Pro SP3, 1.6GHz & 1GB of RAM. I've got a relatively simple java program that I'm able to successfully compile and run on other computers (both XP and Win7), so I suspect my code is working fine--I've verified that all computers are running the same version of Java (build 1.7.0_02-b13). For about the past week, I get maybe three or four compiles and runs at the command prompt (running CMD from within WinXp) before I hang with a blinking cursor after keying my command and pressing enter. If I shut down the command prompt window and restart it, I can compile and run the program just fine--again, pointing to an OS/environment issue rather than code. The only system change I've made in the past week is to uninstall a Lexmark printer that I ditched a year ago, and removing/reinstalling Java. Oh, and an automatic Windows update... :\ I've used this netbook successfully for programming classes for the past year and a half. Anyone familiar with this issue and know of some system tweaks to solve it? I suspect that memory may not be getting cleaned up when the java program quits...only when CMD closes, but don't know any tools to troubleshoot. Ideas?

  Read the article

• Apache Server with memcache, varnish and php slow request times

  - by coolestdude1

  My issue is that these servers are taking rather long for request about 2 seconds on average just to serve files. When we had just one server doing everything it was noticeably faster even with the same web app (Drupal 6 and Drupal 7). I want to get this number down to a reasonable level and so I need some help getting to the bottom of why the request times are so slow. This can cause the webapp to hang on post or put and generally leads to a bad user experience on my sites. PS: I am more of a server newbie so this has confounded me for quite some time. The domains: collabornation.net nptrainingworks.com (they run off the same two webservers using vhost configs) The Gear: Two Rackspace 4 Gig servers running CentOS 6.2 Final They have a mounted file system (gluster) that is used to keep files the same on both machines. They are behind a rackspace load balancer running round robin. Mysql is run using php-pdo and php-mysql as such mysql is run on another instance running memcache on that machine with phpMyAdmin located there as well. Apache version number 2.2.15-15.el6.centos.1 (httpd.x86_64) Varnish version number 3.0.2-1.el5 (varnish.x86_64) PHP version number 5.3.14-1.el6.remi (php.x86_64) Configs Linked Below Apache Conf Vhost Conf Varnish Backends Varnish Defaults Varnish Acl PHP INI Again need some help, much appreciated!

  Read the article

• Ubuntu - wireless connection works great but wired is totally dead

  - by Dan

  I am running Ubuntu 10.04 on my Acer Aspire One netbook. The wireless connection works great, but the wired is totally dead. When I plug the Ethernet wire, the little led next to the port doesn't blink. If I do ifconfig, this is the output: lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1659 errors:0 dropped:0 overruns:0 frame:0 TX packets:1659 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:132304 (132.3 KB) TX bytes:132304 (132.3 KB) wlan0 Link encap:Ethernet HWaddr 18:f4:6a:65:48:1f inet addr:192.168.1.7 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::1af4:6aff:fe65:481f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:94823 errors:0 dropped:0 overruns:0 frame:0 TX packets:81390 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:93028474 (93.0 MB) TX bytes:18002558 (18.0 MB) There is no eth0. Is that normal? In the "Network Connections" GUI there is an entry "Wired connection 1", its "MAC address" field is blank. How can I make the wired connection work?

  Read the article

• Slow tracepath on local LAN

  - by Simone Falcini

  I am on EXSi and I have 2 instances: Ubuntu and CentOS. These are the network configurations Ubuntu eth0 Link encap:Ethernet HWaddr 00:50:56:00:1f:68 inet addr:212.83.153.71 Bcast:212.83.153.71 Mask:255.255.255.255 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:76059 errors:0 dropped:26 overruns:0 frame:0 TX packets:7224 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:6482760 (6.4 MB) TX bytes:2080684 (2.0 MB) eth1 Link encap:Ethernet HWaddr 00:0c:29:46:5a:f2 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:252 errors:0 dropped:0 overruns:0 frame:0 TX packets:608 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:42460 (42.4 KB) TX bytes:82474 (82.4 KB) /etc/iptables.conf *nat :PREROUTING ACCEPT [142:12571] :INPUT ACCEPT [5:1076] :OUTPUT ACCEPT [8:496] :POSTROUTING ACCEPT [8:496] -A POSTROUTING -s 192.168.1.0/24 -o eth0 -j MASQUERADE COMMIT *filter :INPUT ACCEPT [2:72] :FORWARD ACCEPT [4:336] :OUTPUT ACCEPT [6:328] -A INPUT -i eth1 -p tcp -j ACCEPT -A INPUT -i eth1 -p udp -j ACCEPT -A INPUT -i eth0 -p tcp --dport ssh -j ACCEPT COMMIT CentOS eth0 Link encap:Ethernet HWaddr 00:0C:29:74:1C:55 inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe74:1c55/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:499 errors:0 dropped:0 overruns:0 frame:0 TX packets:475 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:68326 (66.7 KiB) TX bytes:82641 (80.7 KiB) The main problem is that if i execute this command from the CentOS instance ssh 192.168.1.2 it takes more than 20s to connect. It seems like it's routing the connection to the wrong network. What could it be? Thanks!

  Read the article

• Xen domU mem-set issue

  - by Casper Langemeijer

  I'm running into a problem on my xen 4.0.1 server (debian squeeze) My host has 32G of memory, Domain-0 has 2048 M assigned to it. (scaled down with xm mem-set Domain-0 2048) top in Domain-0 confirms this. I created a virtual machine config file (using xen-tools) with the following options: memory = '512' maxmem = '2048' Both host and guest machines are running the standard 2.6.32-5-xen-amd64 debian kernel. 'xm create' creates a virtual machine with 512MB of memory as expected. Then 'xm mem-set domU 1024' will not expand the memory to 1024MB running 'xm mem-set domU 400' does set the memory to about 400MB Then 'xm mem-set domU 1024' will expands the memory back to 512MB Based on this, you would say that xm ignores the maxmem and silently sets maxmem to 512, but in the output of xm top the MAXMEM column reads 2G. the MEM column will not go over 512M. The output of xm list tells another story, it shows 1024 when I 'xm mem-set domU 1024'. I've googled myself all away around the internet for this issue and found that most people don't scale back Domain-0. I know I've seen a bugreport about the issue I'm experiencing, but can't find it anymore. Does anyone see what I'm doing wrong here? Hmm.. I just upgraded my kernel to the one provided by debian backports. The issue has gone.

  Read the article

• ubuntu's average load never below "0.00 0.01 0.05"

  - by Karma Fusebox

  I have several ubuntu 12.04 VMs running on a ubuntu 12.04 KVM host. Those of the virtual machines that are totally idle with no services (except syslog and the other "small" standard stuff of a fresh installation) show a constant load of "0.00 0.01 0.05" in top/htop as average 1/5/15. When there are "real" applications running, the load averages behave perfectly normal but they never fall below the mentioned values. While this doesn't affect performance at all and could easily be ignored, it screws up the monitoring graphs in a very annoying way: (Notice how load15 behaves nicely if 0.05 for a short time in the right half of the pic) Unfortunately I don't know what diagnostic outputs might be helpful for you, so here's some default stuff: # top top - 16:31:01 up 1:05, 1 user, load average: 0.00, 0.01, 0.05 Tasks: 62 total, 1 running, 61 sleeping, 0 stopped, 0 zombie Cpu(s): 0.2%us, 0.2%sy, 0.0%ni, 99.2%id, 0.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1019464k total, 73452k used, 946012k free, 6140k buffers Swap: 0k total, 0k used, 0k free, 22504k cached . # free -m total used free shared buffers cached Mem: 995 72 923 0 6 21 -/+ buffers/cache: 43 951 Swap: 0 0 0 . # iostat -x /dev/vda Linux 3.2.0-32-virtual (vm3) 11/15/2012 _x86_64_ (2 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 0.25 0.00 0.65 0.20 0.24 98.66 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util vda 0.14 0.12 0.51 0.22 6.74 1.46 22.50 0.02 23.26 20.64 29.30 7.63 0.56 Need something else? Has anyone ever seen this behavior? Might this be a bug in kvm/ubuntu/kernel 3.x in the end? Thanks a lot!

  Read the article

• how to get ip address of a PPP(Point-to-Point Protocol) network interface?

  - by Xsmael

  I have a Linux machine with two network interfaces, and I'd like to get the IP address of the PPP interface w1g1 but it doesn't show up in ifconfig. There is a public IP on the PPP interface, but there is no internet connection, I'm trying to troubleshoot but I need to get the IP address of the interface and I can't. ifconfig : eth0 Link encap:Ethernet HWaddr 00:30:48:8D:F0:2C inet addr:192.168.2.254 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::230:48ff:fe8d:f02c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9970 errors:0 dropped:567 overruns:0 frame:0 TX packets:4338 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:1441024 (1.3 MiB) TX bytes:915814 (894.3 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:675 errors:0 dropped:0 overruns:0 frame:0 TX packets:675 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:50659 (49.4 KiB) TX bytes:50659 (49.4 KiB) w1g1 Link encap:Point-to-Point Protocol UP POINTOPOINT RUNNING NOARP MTU:240 Metric:1 RX packets:748994 errors:0 dropped:0 overruns:0 frame:0 TX packets:748992 errors:0 dropped:0 overruns:0 carrier:3 collisions:0 txqueuelen:100 RX bytes:179758560 (171.4 MiB) TX bytes:179758080 (171.4 MiB) Interrupt:177 Memory:f881c400-f881e3ff w1g1 is connected to a modem by an RJ45<-Serial cable and the modem is connected to the phone line. The modem is a NOKIA DNT2Mi you can see it here Routing table : 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.254 169.254.0.0/16 dev eth0 scope link default via 192.168.2.180 dev eth0

  Read the article

• How do I get rid of these "There is a problem with your tablet driver" messages?

  - by Adam Rosenfield

  Every time I run certain applications (including but not limited to GIMP, Microsoft Visual Studio, and 3DS Max), I get the following message box: There is a problem with your tablet driver. Please reboot your system. If the problem persists reinstall or update the driver. Obviously I've tried rebooting and that hasn't fixed anything. Secondly, I'm not running a tablet PC. This is just Windows XP SP3 running on a Dell Precision PWS490 desktop workstation. How do I get rid of these error messages? The applications still load normally after dismissing them, but they're rather annoying. Using Process Explorer, I got the call stack from the message box. It's coming from wintab32.dll. Here's the call stack when running GIMP (irrelevant frames omitted): ... 8 USER32.dll!MessageBoxA+0x45 9 wintab32.dll!WTMgrPacketHookExA+0x44a 10 libgdk-win32-2.0-0.dll!gdk_display_list_devices+0x37 ... So, does anyone know how I can get an updated version of wintab32.dll or have any other ideas? I've been keeping my system up to date with Windows Updates. The timestamp on wintab32.dll is 2007-03-30 17:38, and its MD5 sum is ffdc332007c9dc6dd346c8ac2b09a015.

  Read the article

• How does one skip “Windows did not shut down successfully” in Win7-64?

  - by XenonofArcticus

  Migrating an app from an expensive and unreliable dedicated embedded x86 box running WinXP-embedded to COTS hardware (Dell E6410 laptop) running normal Win7-64. At this time, it's not feasible to deploy using Windows 7 embedded. The problem is, that the system is still sort of "embedded". The power could shut off at virtually any time without prior warning. We've stripped the OS down and removed the battery capability so that it will power down as desired. The app never writes to the disk, so it's not like we're going to corrupt anything terribly. The system is essentially idle after our app is up and running (with the exception of some computation, graphics, and TCP/IP and serial communications) so the OS enters a pretty stable state rather quickly. After a power-loss however, it rightly complains that Windows did not shut down successfully and presents the user with the Windows Error Recovery text screen. If left alone, it does eventually move on booting just fine, but we'd like to skip that step if possible. WinXP-embedded is designed to do this automatically, so I know it's possible. I've looked at the Kernel Switches but I didn't see anything documented for "Skip Windows Error Recovery". I've also read extensively on the startup process: http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/windows-nt-6-boot-process.html I know I can disable the auto chkdsk in the registry, but that's not the same thing either. So, how do I streamline the boot process to not hassle the user about a situation that will be the regular normal situation?

  Read the article

• How to start MSSQL Server with corrupt model db

  - by Jordan McGuigan

  After moving some databases around (restoring, deleting, etc) we experienced an issue creating new databases. Specifically, When trying to create a new database MSSQL Server it failed because the "The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run". As some online solutions suggested, we tried to Start and Stop the MSSQL Service. Service would not restart because "Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive" (FYI: the drive has 100gb of free space). Tried restarting the machine the MSSQL Server is running on. When the server came back online, we received the same error. We have tried deleting tempdb.mdf and restoring the modeldb from the templates folder, but neither of these solved the issue. We are unable to connect to the database, even in single user mode. Many of the online solutions have us running SQL commands against the server, but we are unable to connect (even in single user mode) to the DB to run commands against the server. Specific error messages: Database 'model' cannot be opened. It is in the middle of a restore. (Microsoft SQL Server, Error: 927) The SQL Server (MSSQLSERVER) service is starting. The SQL Server (MSSQLSERVER) service could not be started. A service specific error occurred: 1814. We need the server up and running again ASAP.

  Read the article

• "Error 5: Access denied" when installing programs with UAC turned off

  - by Aero

  I'm having some trouble installing msysgit 1.7.3.1preview on Windows 7 Home Premium. I downloaded the setup file from the Google Code and then ran it. Upon running, I got the following error: I have tried downloading and running different older versions of msysgit with no luck. For the record, I have administrative privileges and there are no other user accounts on this Windows machine. Any help would be greatly appreciated. Thanks. UPDATE: I have managed to semi-fix this problem. I turned on User Account Control back to the default setting and and then ran the setup file as an administrator. I successfully managed to install Git. However, this means I have to keep UAC turned on whenever I want to install a new program (I realised that it persists over all programs; not just Git). So it's quite a nuisance. If anybody knows how I could keep UAC disabled whilst still being able to install programs without running their setup files as an administrator, I would be eternally grateful. UPDATE: I have changed the question title to better suit the new situation.

  Read the article

< Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >