Search Results

Search found 7126 results on 286 pages for 'wireless router'.

Page 216/286 | < Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >

• How to hack airport extreme to support USB 3G modem?

  - by Mike Caron

  Has anyone out there ever tried to hack the Airport Extreme, specifically with regard to the USB port? There are many cellular routers available that provide WiFi sharing of a USB modem link. However, instead of buying yet another router, I'd like to use my expensive Airport Extreme with it. The AE has a USB port on the back, but it's been said that it only talks to printers. Is there a way to hack the USB driver on the AE to allow it to recognize a USB modem, then use that as the connectivity instead of the LAN? I would imagine that one could use OpenFirmware to boot something on the AE. If one can boot it, then one could provide access using SSH across the lan. Once access is granted, then let the hacking begin... but I don't know how to (a) get the mini-osx on to USB (is it the same as the ATV without a UI?) or (b) how to load up certain things once boot has begun.

  Read the article

• HP Jetdirect 175x and HP Officejet K7103 printsharing

  - by Richard

  I have managed to get this setup working , but it is very unreliable and either the printserver or the printer seem to crash and wont respond after 1 or 2 prints, although I am able to still access the web config of the 175x. I had a similar problem with a linksys wireless print server with the same problem and assumed that a HP print server would do the job better...grrrr!! Anybody any ideas what to do next? It is not possible to flash the printserver, nor the printer as far as I know, so I assume I have some iffy settings in the print server config somewhre. All our users are W7 or Vista BTW. Cheers Richard

  Read the article

• Cisco PIX 515 internet connection

  - by Steve

  We have a ASDL modem connected to a Cisco PIX 515 to a switch. We have managed to get the PIX setup with ethernet1 (inside) with our IP range 192.168.5.1-192.168.5.254 and the internal network is working fine. We are having difficulty getting a connection from the PIX through the router on ethernet0 (outside). We have managed to ping external networks by setting up IMCP echo/echo-reply but are unable to setup any other protocols in a similar manner. Can any one help with a few lines that could be typed into the console that will allow this connection?

  Read the article

• DYNDNS setup with TightVNC on Windows Server 2008 R2

  - by StealthRT

  Hey all, i seem to be having a problem with getting ports to forward on my Windows Server 2008 R2 PC. I already set all my port forwarding for 5900/5800 on my router for my PC's IP address (192.168.1.22) but when i try to use the TightVNC PFPortChecker on port 5900 it tells me its not opened! I can not even connect to my DYNDNS server name (xxxxxxx.dyndns.org). As a side note, i am running Windows XP SP3 within a VirtaulBox inside Windows Server 2008 R2 but running the PFPortChecker in Windows 2008 R2 brings the same results as it does in the VM. I also added them to the Windows Firewall Advanced Security form to add those inbound ports for full access. What could i possibly be missing? Thanks for your time! David

  Read the article

• SSH Tunneling from Windows to Linux/Ubuntu

  - by Mike

  My question is for my girlfriend basicly.... She works at a mall and doesn't do much so she likes to get on myspace and facebook as most girls do and yahoo to check her email. Well she uses her laptop to connect to a wireless network that doesn't allow it.... so I did some research and got putty and connected to my linux box I have here at home and it worked somewhat. My problem is it only views my webpages I have created here on this box it won't go outside of the linux host. I did it like this in putty... port is 1000 and hostname:80 is what I got outa my research then connected after seting up the tunnel bam worked for all webpages on my box but when she puts in www.myspace.com it redirects to my index.php in my var/www and won't travel outside that as I said.. Any help would be much obliged.

  Read the article

• Unable to connect to Adobe Connect

  - by ub3rst4r

  I am having troubles trying to connect my colleges Adobe Connect. I have done the test meeting connection and it will say "Unable to connect". I have tried connecting on 3 other computers and it works with flying colors. I am running Norton 360 on my computer and I also tried it on my other laptop thats also running Norton 360 and it works on that laptop. I also checked my hosts file and that is not the problem because I am able to connect to the server (on port 80) but not the Adobe Connect port (port 1935). The only thing in it is "127.0.0.1 localhost" Here are the details from the log that the test created: Player Version: WIN 11,3,300,271 App-Server returned: code:ok, servers=rtmp://connect.bowvalleycollege.ca:1935/_rtmp://localhost:8506/,rtmpt://connect.bowvalleycollege.ca:443/_rtmp://localhost:8506/ ERROR: FMS Server did not return correctly! Here is my specifications: Windows 7 SP1 x64 Norton 360 v6.3 (latest) It won't connect in Firefox v15, Chrome v19, or IE9 All of my computers are connected through the same router (D-Link DIR-625) Any ideas?

  Read the article

• How to configure wpa_supplicant on RHEL6?

  - by Yang Jy

  I am running a version of RHCE6 on my laptop. I uninstalled the default NetworkManager in order that I could configure the network all in the command line. The Ethernet part is okay, but I have problem bringing up the wireless interface. What I got is: Bringing up interface wlan0: Determining IP information for wlan0... failed; no link present. Check cable? I did exactly what this article says. I am not sure if it is because the article is obsolete or something else. Please help.

  Read the article

• WAN interface responds as LAN when request comes from LAN, is that correct?

  - by Eugenio Miró

  Hi Everyone! I have a problem with my router/modem. I've published an HTTP service from one of my internal computers and when I access the service from the internal lan using the external IP address the modem responds instead of redirecting the call to the forwarded port. I can access the service from outside however, but from the internal network the modem responds to my calls. I'm using a ZTE ZXDSL 831 Series modem with ZXDSL 831IIV7.5.1e_E09_BR1 firmware. Thanks in advance!

  Read the article

• Multiple vlan issue with procurve switch

  - by Chris-AZ

  I have a cisco asa5505 as my rtr/fw(10.1.3.254). I have vlan 1 and vlan 3. Vlan 1 is my default all access vlan. Vlan 3 is my Guest(dmz) vlan. I can't seem to get a dhcp ip address when my laptop is plugged into port 42 on my procurve. I have plugged my laptop directly into the firewall and it gets a dhcp ip fine(the firewall is dhcp server). the firewall is plugged into port 41. Only vlan3 needs to go over port 41. I'm sure I have a bonehead config problem however I'm about ready to pull out what little hair I have left. vlan 1 name "Computers" forbid 45 untagged 1-41,43-44 ip helper-address 10.1.1.16 ip address 10.1.1.1 255.255.255.0 tagged 46-48 no untagged 42,45 exit vlan 3 name "Guest Wireless" ip helper-address 10.1.3.254 ip address 10.1.3.1 255.255.255.0 tagged 41-42,44-48 exit

  Read the article

• Remote control a computer using another computer

  - by Dean

  I've got a main desktop computer at home, I'd like watch movies using it but able to control it afar. For example, I would like to lay on my bed and control the desktop using my own laptop via wireless. I've been looking for solutions to my question. I tried to use remote desktop, I can pause the movie but I then have to go to the pc to log in the OS again. I also tried to bind my desktop to my mobile phone over bluetooth, this works as I can control the mouse etc. but I found I can barely see the mouse pointer when at long distance. I still wish I can use my laptop as a remote control, is this possible?

  Read the article

• Can I get an adapter for usb 3.0 to gigabit, or a gigabit switch with usb 3.0?

  - by techaddict

  Basically I want to be able to attach USB 3.0 external portable hard drives to my network and maintain at least gigabit speeds. I can think of four ways to do this, two of which I know exist: 1) NAS - get an NAS which features USB 3.0 and gigabit 2) Gigabit router with a USB 3.0 port and I want to know if these two exist: 3) gigabit switch (multiple gigabit ports) with at least one USB 3.0 port 4) USB 3.0 to gigabit adapter The gigabit adapter would be similar to this: http://www.addonics.com/products/nas30u2.php except that that is only USB 2.0 so it is not true gigabit, as gigabit is 125MBps but USB 2.0 is only 60MBps, so that adapter only has a maximum transfer speed of 60MBps and the "gigabit" is practically useless.

  Read the article

• Why would the Default Gateway constantly require resetting?

  - by Raven Dreamer

  I've had a (mostly) steady internet connection for the past two months. For the last hour, however, my connectivity has been dropping every 10 minutes or so, and must be reset. So far, I've always been able to fix the issue by running Windows network diagnostics (On Windows 7 64 bit), but the lack of constant internet is making it a pain to try and stream video, download games through steam, etc. Windows always reports a fix by "Resetting the Local Area Connector", telling me: Default Gateway Not Available. What's going on? Is the trouble on my end, or with my ISP? (Timewarner Cable) Things I've Tried: Reinstalling the motherboard's LAN drivers Manually setting a default gateway (gets cleared, reverts to default settings) Unplugged (Hard Reset) the router Unplugged / replugged ethernet cable.

  Read the article

• Setup Cisco RVS4000 QOS for VOIP

  - by andyknas

  Just switched from dedicated T1's with analog phone lines to cable modem with 10/2 uplink. We're having some VOIP call quality issues on the outgoing side when bandwidth is stressed and I need to setup QOS or a VLAN on our RVS4000 router. Currently all phone traffic (talkswitch device and ip phones) are on it's own d-link PoE switch, and all workstations are on a LinkSys 1GB switch. Both switches are plugged into ports on the RVS4000. I'd like to set it up so that the dlink port has ~512Mbsp dedicated to it for voice at all times. It's my understanding that with a VLAN or QOS I can set this up. I've got QOS setup already with port 5060 to have high priority but it doesn't seem to make a difference.

  Read the article

• Why would Firefox not be able to visit Google anymore?

  - by Edward Tanguay

  Lately I've noticed that my Firefox Browser was taking a long time when I would search Google, e.g. 3 seconds before I would see any results. If I search for a three-word phrase, it just hangs trying to connect: I removed all add-ons but it still does this. I thought it might be something with my router, but Chrome, Safari, Opera and Internet Explorer all work fine. Bing works fine in Firefox. Here's my Firefox version information: Otherwise I can still use Firefox, e.g. I'm using it to post this question, but I do notice that when I browse with it, images are often "broken" for a split second before they appear, as if it is having a hard time pulling them from a remote server. Other browsers don't do this. What could be causing Firefox to hang when searching Google?

  Read the article

• Screensaver does not work for one user account, but does for the other

  - by Travesty3

  Both my screensaver and my "turn off monitor" power saver never come on for one user account on my computer, but it does for the other. It worked before. I can't think of anything I did just before this started happening. I'm using Windows 7 Pro SP1 with the default Aero theme, my screensaver is set to Mystify and should come on after 10 minutes. My power saver setting is set to Balanced, the Turn Off Monitor setting is set to 15 minutes, and the Sleep setting is set to Never. This all works absolutely fine on my user account, but if my wife's user account is logged in, it doesn't work. I don't have any antivirus, I'm not using a wireless keyboard or mouse, and I don't have MagicJack. I have restarted the computer many times since I've seen this problem. Anyone have any suggestions?

  Read the article

• Are all bluetooth adapters the same ?

  - by ldigas

  I have a wireless bluetooth mouse which I'm not using. It used to have a bluetooth adapter with it, which I lost a long time ago ... (don't ask). Since my regular mouse just died (bad contact in cable from messing with it too much) I was thinking of buying just the new generic bluetooth adapter ? Are all those adapters the same thing ? Or can this that came with the mouse be somehow different ? Edit by ldigas: How would one find out what bluetooth standard/class/adapter one needs ? (I don't see anything useful written on the sticker on the mouse). Or to put it bluntly - will it work with this one in your opinion ?

  Read the article

• Static IPv6 address advertising and IPv6 autoconfig in Debian/Ubuntu

  - by Pascal

  I have a network that advertises IPv6 addresses through IPv6 autoconfig. To allow DNS lookups and to have fancy IP addresses, we setup "static" IPv6 addresses through /etc/network/interfaces: auto eth0 iface eth0 inet dhcp iface eth0 inet6 static address a:b:c:d:e::f netmask 64 Whenever we now connect through IPv6 Linux uses the IPv6 autoconfig address: a:b:c:d:21d:60ff:fe4a:479 and not the static IPv6 address: a:b:c:d:e::f A server on the other side only sees the autoconfig address. Is there a way to force linux (Debian/Ubuntu) to use the static address for outgoing packets? This is especially interesting for reverse DNS and firewall settings. I don't want to disable the IPv6 autoconfig since I don't have control over the settings the router advertises.

  Read the article

• Unable to access local network when Cisco VPN client is connected

  - by bryanroth

  I'm a developer and don't have much networking expertise, so bear with me. I'm using the Cisco VPN Client 5.0.02.0090 to connect to my work's VPN that way I can RDP into my work computer. Once connected, I can't ping anything on the local network once connected to the VPN thus I am unable to access my work's network. This used to work about two weeks ago but abruptly stopped working today. However, I have the Cisco VPN Client installed on my laptop and I am able to ping and RDP into my work computer from there. Both my desktop and laptop computers are connected to the same router at home. I have tried the following so far: Rebooted my computer Reinstalled VPN client Updated NIC drivers Disabled firewall Opened up ports 500, 4500, and 10000 Any help would be much appreciated. Thanks!

  Read the article

• Mule xml to soap problem

  - by kevfuzz

  Hi, I'm not sure if there many Mule users on here but I'm hoping someone might be able to help me! I'm having a problem calling a webservice from Mule using Axis. I've created a fairly simple example where I have xml in a file being read by Mule, it's then transformed into a Document and sent to the webservice. The relevant code in the mule config looks like this: <inbound> <file:inbound-endpoint path="./files/initial" transformer-refs="FileToString xmlToDom" connector-ref="fileConnector" /> </inbound> <outbound> <pass-through-router> <axis:outbound-endpoint address="http://localhost:8081/holidayService?method=echoXXXX" synchronous="true" style="DOCUMENT" use="LITERAL" /> </pass-through-router> </outbound> However the call for the webservice fails as the above config is generating a SOAP message with an tag just after the tag and closes it just before the tag. The generated SOAP message looks like this: POST /holidayService?method=echoXXXX HTTP/1.1 Content-Type: text/xml X-MULE_ENDPOINT: http://localhost:8081/holidayService?method=echoXXXX SOAPAction: http://localhost:8081/holidayService?method=echoXXXX directory: D:\bea\weblogic92\samples\domains\wl_server\files\processed filename: HolidayRequest.xml method: echoXXXX originalFilename: HolidayRequest.xml style: document use: literal User-Agent: Jakarta Commons-HttpClient/3.1 Host: 127.0.0.1:8081 Content-Length: 1183 <?xml version="1.0" encoding="UTF-8"?> <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <soapenv:Header> <mule:header soapenv:actor="http://www.muleumo.org/providers/soap/1.0" soapenv:mustUnderstand="0" xmlns:mule="http://www.muleumo.org/providers/soap/1.0"> <mule:MULE_CORRELATION_ID>D:\bea\weblogic92\samples\domains\wl_server\files\processed\HolidayRequest.xml</mule:MULE_CORRELATION_ID> <mule:MULE_CORRELATION_GROUP_SIZE>-1</mule:MULE_CORRELATION_GROUP_SIZE> <mule:MULE_CORRELATION_SEQUENCE>-1</mule:MULE_CORRELATION_SEQUENCE> </mule:header> </soapenv:Header> <soapenv:Body> <value0 xsi:type="ns1:DocumentImpl" xmlns="" xmlns:ns1="http://dom.internal.xerces.apache.org.sun.com"> <sch:HolidayRequest xmlns:sch="http://mycompany.com/hr/schemas"> <sch:Holiday> <sch:StartDate>2009-08-13</sch:StartDate> <sch:EndDate>1988-12-12</sch:EndDate> </sch:Holiday> <sch:Employee> <sch:Number>3434</sch:Number> <sch:FirstName>John</sch:FirstName> <sch:LastName>Smith</sch:LastName> </sch:Employee> </sch:HolidayRequest> </value0> </soapenv:Body> </soapenv:Envelope> The webservice works fine in SOAPUI without the tag and from what I've read on the Mule website I don't know why it's being inserted. Any help would be much appreciated, Kevin.

  Read the article

• Forwarding MySQL connection with iptables and differents network interfaces

  - by Emilio Nicolás

  I have a PC with Ubuntu as a router. It has a 3G connection with a public IP to the Internet, and there is a private wireless subnet. So it has two active interfaces: ppp0: public IP (WAN) wlan0: private IP (LAN) With iptables I wannt to forward every MySQL connection (port 3306) to a local machine (10.42.43.10) of the subnet. I type these iptables commands: iptables -A PREROUTING -t nat -i ppp0 -p tcp --dport 3306 -j DNAT --to 10.42.43.10:3306 iptables -A FORWARD -p tcp -i ppp0 -o wlan0 -d 10.42.43.10 --dport 3306 -j ACCEPT But it doesn't work. telnet publicip 3306 fails :-( Any help will be appreciated. Thanks!

  Read the article

• How can I route all network traffic through Sonicwall Netextender VPN Client with Ethernet internet sharing enabled on a mac?

  - by Ryan Smith

  I basically have a sonic wall firewall protecting a server which I want to SSL VPN log into with multiple computers. However, I would like to do this by having those computers (or router with computer) connected to a Mac's ethernet port (the vpn would be over wireless) through the internet sharing feature on the iMac. We use the provided Sonicwall Netextender VPN Client to connect to the firewall / server and would like to only have to use one SSL ID to cover all the computers by only having the central Mac sign in. Can anyone out there help me achieve this or tell me it isn't possible? Thank a lot.

  Read the article

• linksys Rvo16 redundant link config

  - by Adeodatus

  Hi All I have been given an RVO16 to play with. I'm multihomed and I'd like to set it up so that my primary, highest bandwidth link receives all traffic and the other connection is a hot spare basically. I want them both online but only the primary 1 used until it goes down then all traffic should automatically failover to the secondary link. Those of you that have played on an RVO16, can I do this and if so, how? I imagine I'd have it act as a router and pad the route on one so that the other is never used unless the primary is down. How? Thanks all.

  Read the article

• OpenVPN performance: how many concurrent clients are possible?

  - by Steffen Müller

  I am evaluating a system for a client where many OpenVPN clients connect to a OpenVPN server. "Many" means 50000 - 1000000. Why do I do that? The clients are distributed embedded systems, each sitting behind the system owners dsl router. The server needs to be able to send commands to the clients. My first naive approach is to make the clients connect to the server via an openvpn network. This way, the secure communication tunnel can be used in both directions. This means that all clients are always connected to the server. There are many clients summing up over the years. The question is: does the OpenVPN server explode when reaching a certain number of clients? I am already aware of a maximum TCP connection number limit, therefore (and for other reasons) the VPN would have to use UDP transport. OpenVPN gurus, what is your opinion?

  Read the article

• Locate rogue DHCP server

  - by Farseeker

  I know this is a serious long shot, but here we go. In the past week or so, for users connected to a particular switch in our network (there are four dumb switches all connected, and it only affects SOME, not all, users on the one switch) are getting DHCP addresses from a rogue DHCP server. I have physically checked every cable plugged into the switch in question to make sure that none of them have a router or wifi point attached to it. I know the IP of the DHCP server, but I cannot ping it, and it does not have a web interface. Does anyone have any suggestions on what I can do to locate it or shut it down? Unfortuantely all the switches are unmanaged, and as mentioned, there's no physical device (that I can find) plugged in to anything. It's getting critical, because it's screwing up the PXE boot of a whole bunch of thin clients.

  Read the article

• Can't get heroku work with rails 3.x postgresql

  - by framomo86

  I followed Heroku official guides to push rails project to heroku. The application.rb file is ok, I added pg gem and database.yml in the right way. When I push to heroku I get: -----> Preparing app for Rails asset pipeline Detected manifest.yml, assuming assets were compiled locally But when I open heroku via heroku open I get an error. I put heroku logs and get this. Started GET "/" for 93.45.227.255 at 2012-10-11 13:28:04 +0000 2012-10-11T13:28:04+00:00 app[web.1]: Processing by ProductsController#index as HTML 2012-10-11T13:28:04+00:00 app[web.1]: : SELECT a.attname, format_type(a.atttypid, a.atttypmod), d.adsrc, a.attnotnull 2012-10-11T13:28:04+00:00 app[web.1]: ActiveRecord::StatementInvalid (PG::Error: ERROR: relation "products" does not exist 2012-10-11T13:28:04+00:00 app[web.1]: LINE 4: WHERE a.attrelid = '"products"'::regclass 2012-10-11T13:28:04+00:00 heroku[router]: GET gift4.herokuapp.com/ dyno=web.1 queue=0 wait=0ms service=203ms status=500 bytes=643 2012-10-11T13:28:04+00:00 app[web.1]: ): 2012-10-11T13:28:04+00:00 app[web.1]: ON a.attrelid = d.adrelid AND a.attnum = d.adnum 2012-10-11T13:28:04+00:00 app[web.1]: 2012-10-11T13:28:04+00:00 app[web.1]: 2012-10-11T13:28:04+00:00 app[web.1]: ^ 2012-10-11T13:28:04+00:00 app[web.1]: 2012-10-11T13:28:04+00:00 app[web.1]: Completed 500 Internal Server Error in 72ms 2012-10-11T13:28:04+00:00 app[web.1]: FROM pg_attribute a LEFT JOIN pg_attrdef d 2012-10-11T13:28:04+00:00 app[web.1]: WHERE a.attrelid = '"products"'::regclass 2012-10-11T13:28:04+00:00 app[web.1]: AND a.attnum > 0 AND NOT a.attisdropped 2012-10-11T13:28:04+00:00 app[web.1]: ORDER BY a.attnum 2012-10-11T13:28:04+00:00 app[web.1]: app/controllers/products_controller.rb:5:in `index' 2012-10-11T13:28:04+00:00 heroku[router]: GET gift4.herokuapp.com/favicon.ico d So I tried heroku run rake db:reset And get this Heroku client internal error. ! Search for help at: https://help.heroku.com ! Or report a bug at: https://github.com/heroku/heroku/issues/new Error: Operation timed out - connect(2) (Errno::ETIMEDOUT) Backtrace: /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/client/rendezvous.rb:39:in `initialize' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/client/rendezvous.rb:39:in `open' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/client/rendezvous.rb:39:in `block in start' /Users/francescochecco/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/timeout.rb:68:in `timeout' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/client/rendezvous.rb:31:in `start' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/command/run.rb:125:in `rendezvous_session' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/command/run.rb:112:in `run_attached' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/command/run.rb:21:in `index' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/command.rb:206:in `run' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/cli.rb:28:in `start' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/bin/heroku:16:in `<top (required)>' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/bin/heroku:19:in `load' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/bin/heroku:19:in `<main>' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/bin/ruby_noexec_wrapper:14:in `eval' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/bin/ruby_noexec_wrapper:14:in `<main>' Command: heroku run rake db:reset Version: heroku-gem/2.32.6 (x86_64-darwin11.3.0) ruby/1.9.3 autoupdate I tried everything. Anyone could help?

  Read the article

< Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >