Search Results

Search found 25996 results on 1040 pages for 'memory address'.

Page 217/1040 | < Previous Page | 213 214 215 216 217 218 219 220 221 222 223 224  | Next Page >

• Why can't I connect to computers on my network using our external IP address?

  - by Kivin

  My home network is serviced by an ADSL line. The modem is in bridged mode. The router performs the PPPoE. Three computers are connected to the router: two wired Windows 7 boxes and a Ubuntu Linux box over wifi. The computers are hosting various forms of services including FTP and HTTP. The router has port forwarding mapped from the relevant ports to the reserved IP addresses for the computers. If I attempt to connect to a server inside the network, such as ftp://67.xx.xxx.xxx from inside the network, the request times out. However if I connect using the internally mapped address, such as ftp://192.168.0.100, all is well. This is a nuisance for setting up software, especially on the laptop which needs to be able to phone home from anywhere, and I just don't have enough expertise with networking to know why this is occurring to even have a clue whether it can be solved or not. edit: It should be noted that the servers can be accessible outside the network - say, at the starbucks across the street - perfectly fine, using the ISP provided address and the appropriate port.

  Read the article

• PowerDNS CNAME with multiple A records produces unexpected results

  - by bwight

  This problem from what i can tell is isolated to PowerDNS. The servers are running two packages pdns-static-3.0.1-1.i386.rpm and pdns-recursor-3.3-1.i386.rpm on the most recent version of Amazon Linux. The amazon ec2 loadbalancers are assigned a CNAME with multiple hosts. Below is an example of the actual behavior. Notice how the hosts are always in the same order. [root@localhost ~]# host cache.domain.com cache.domain.com is an alias for xxxxx.us-east-1.elb.amazonaws.com. xxxxx.us-east-1.elb.amazonaws.com has address aaa.aaa.aaa.aaa xxxxx.us-east-1.elb.amazonaws.com has address bbb.bbb.bbb.bbb [root@localhost ~]# host cache.domain.com cache.domain.com is an alias for xxxxx.us-east-1.elb.amazonaws.com. xxxxx.us-east-1.elb.amazonaws.com has address aaa.aaa.aaa.aaa xxxxx.us-east-1.elb.amazonaws.com has address bbb.bbb.bbb.bbb [root@localhost ~]# host cache.domain.com cache.domain.com is an alias for xxxxx.us-east-1.elb.amazonaws.com. xxxxx.us-east-1.elb.amazonaws.com has address aaa.aaa.aaa.aaa xxxxx.us-east-1.elb.amazonaws.com has address bbb.bbb.bbb.bbb Expected behavior is round robin for the hosts [root@localhost ~]# host cache.domain.com cache.domain.com is an alias for xxxxx.us-east-1.elb.amazonaws.com. xxxxx.us-east-1.elb.amazonaws.com has address aaa.aaa.aaa.aaa xxxxx.us-east-1.elb.amazonaws.com has address bbb.bbb.bbb.bbb [root@localhost ~]# host cache.domain.com cache.domain.com is an alias for xxxxx.us-east-1.elb.amazonaws.com. xxxxx.us-east-1.elb.amazonaws.com has address bbb.bbb.bbb.bbb xxxxx.us-east-1.elb.amazonaws.com has address aaa.aaa.aaa.aaa [root@localhost ~]# host cache.domain.com cache.domain.com is an alias for xxxxx.us-east-1.elb.amazonaws.com. xxxxx.us-east-1.elb.amazonaws.com has address aaa.aaa.aaa.aaa xxxxx.us-east-1.elb.amazonaws.com has address bbb.bbb.bbb.bbb The addresses eventually do swap but it seems to be on a 30 minute cache timer changing the TTL of the record doesn't appear to affect anything. It appears as though the resolver has a cache of the response. This adversely affects my application because all of the load is only being sent to one of the loadbalancers (Availability Zones) so if I have servers in two zones then only one zone is under load at a time. Do you know how I can fix this so that each time the host is resolved the order of the addresses is alternating.

  Read the article

• What liability concerns do advertising vendors raise, and how can I address them?

  - by Beofett

  One of the websites I administer wants to provide free advertising in the form of direct links to vendors at an event they are running. Up until now, there has been no advertising whatsoever on the site (or any of our other sites). The site is for a for-profit business. The idea of implicit endorsement of any vendors we advertise has been raised, which brought up the question of what we need to do, if anything, to protect ourselves from any potential problems such endorsement might create. I know that many sites have clauses in their Terms of Service that state that (in a nutshell) they are not responsible for any problems or grievances between the visitors to the site and any vendor advertised or linked. Are there other steps that a website typically takes when considering advertising, such as getting the advertiser to provide some sort of certification that their ad will not violate any trademarks or copyrighted material?

  Read the article

• Site-to-site VPN using MD5 instead of SHA and getting regular disconnection

  - by Steven

  We are experiencing some strange behavior with a site-to-site IPsec VPN that goes down about every week for 30 minutes (Iam told 30 minutes exactly). I don't have access to the logs, so it's difficult to troubleshoot. What is also strange is that the two VPN devices are set to use SHA hash algorithm but apparently end up agreeing to use MD5. Does anybody have a clue? or is this just insufficient information? Edit: Here is an extract of the log of one of the two VPN devices, which is a Cisco 3000 series VPN concentrator. 27981 03/08/2010 10:02:16.290 SEV=4 IKE/41 RPT=16120 xxxxxxxx IKE Initiator: New Phase 1, Intf 2, IKE Peer xxxxxxxx local Proxy Address xxxxxxxx, remote Proxy Address xxxxxxxx, SA (L2L: 1A) 27983 03/08/2010 10:02:56.930 SEV=4 IKE/41 RPT=16121 xxxxxxxx IKE Initiator: New Phase 1, Intf 2, IKE Peer xxxxxxxx local Proxy Address xxxxxxxx, remote Proxy Address xxxxxxxx, SA (L2L: 1A) 27986 03/08/2010 10:03:35.370 SEV=4 IKE/41 RPT=16122 xxxxxxxx IKE Initiator: New Phase 1, Intf 2, IKE Peer xxxxxxxx local Proxy Address xxxxxxxx, remote Proxy Address xxxxxxxx, SA (L2L: 1A) [… same continues for another 15 minutes …] 28093 03/08/2010 10:19:46.710 SEV=4 IKE/41 RPT=16140 xxxxxxxx IKE Initiator: New Phase 1, Intf 2, IKE Peer xxxxxxxx local Proxy Address xxxxxxxx, remote Proxy Address xxxxxxxx, SA (L2L: 1A) 28096 03/08/2010 10:20:17.720 SEV=5 IKE/172 RPT=1291 xxxxxxxx Group [xxxxxxxx] Automatic NAT Detection Status: Remote end is NOT behind a NAT device This end IS behind a NAT device 28100 03/08/2010 10:20:17.820 SEV=3 IKE/134 RPT=79 xxxxxxxx Group [xxxxxxxx] Mismatch: Configured LAN-to-LAN proposal differs from negotiated proposal. Verify local and remote LAN-to-LAN connection lists. 28103 03/08/2010 10:20:17.820 SEV=4 IKE/119 RPT=1197 xxxxxxxx Group [xxxxxxxx] PHASE 1 COMPLETED 28104 03/08/2010 10:20:17.820 SEV=4 AUTH/22 RPT=1031 xxxxxxxx User [xxxxxxxx] Group [xxxxxxxx] connected, Session Type: IPSec/LAN- to-LAN 28106 03/08/2010 10:20:17.820 SEV=4 AUTH/84 RPT=39 LAN-to-LAN tunnel to headend device xxxxxxxx connected 28110 03/08/2010 10:20:17.920 SEV=5 IKE/25 RPT=1291 xxxxxxxx Group [xxxxxxxx] Received remote Proxy Host data in ID Payload: Address xxxxxxxx, Protocol 0, Port 0 28113 03/08/2010 10:20:17.920 SEV=5 IKE/24 RPT=88 xxxxxxxx Group [xxxxxxxx] Received local Proxy Host data in ID Payload: Address xxxxxxxx, Protocol 0, Port 0 28116 03/08/2010 10:20:17.920 SEV=5 IKE/66 RPT=1290 xxxxxxxx Group [xxxxxxxx] IKE Remote Peer configured for SA: L2L: 1A 28117 03/08/2010 10:20:17.930 SEV=5 IKE/25 RPT=1292 xxxxxxxx Group [xxxxxxxx] Received remote Proxy Host data in ID Payload: Address xxxxxxxx, Protocol 0, Port 0 28120 03/08/2010 10:20:17.930 SEV=5 IKE/24 RPT=89 xxxxxxxx Group [xxxxxxxx] Received local Proxy Host data in ID Payload: Address xxxxxxxx, Protocol 0, Port 0 28123 03/08/2010 10:20:17.930 SEV=5 IKE/66 RPT=1291 xxxxxxxx Group [xxxxxxxx] IKE Remote Peer configured for SA: L2L: 1A 28124 03/08/2010 10:20:18.070 SEV=4 IKE/173 RPT=17330 xxxxxxxx Group [xxxxxxxx] NAT-Traversal successfully negotiated! IPSec traffic will be encapsulated to pass through NAT devices. 28127 03/08/2010 10:20:18.070 SEV=4 IKE/49 RPT=17332 xxxxxxxx Group [xxxxxxxx] Security negotiation complete for LAN-to-LAN Group (xxxxxxxx) Responder, Inbound SPI = 0x56a4fe5c, Outbound SPI = 0xcdfc3892 28130 03/08/2010 10:20:18.070 SEV=4 IKE/120 RPT=17332 xxxxxxxx Group [xxxxxxxx] PHASE 2 COMPLETED (msgid=37b3b298) 28131 03/08/2010 10:20:18.750 SEV=4 IKE/41 RPT=16141 xxxxxxxx Group [xxxxxxxx] IKE Initiator: New Phase 2, Intf 2, IKE Peer xxxxxxxx local Proxy Address xxxxxxxx, remote Proxy Address xxxxxxxx, SA (L2L: 1A) 28135 03/08/2010 10:20:18.870 SEV=4 IKE/173 RPT=17331 xxxxxxxx Group [xxxxxxxx] NAT-Traversal successfully negotiated! IPSec traffic will be encapsulated to pass through NAT devices.

  Read the article

• WPF: Reloading app parts to handle persistence as well as memory management.

  - by Ingó Vals

  I created a app using Microsoft's WPF. It mostly handles data reading and input as well as associating relations between data within specific parameters. As a total beginner I made some bad design decision ( not so much decisions as using the first thing I got to work ) but now understanding WPF better I'm getting the urge to refactor my code with better design principles. I had several problems but I guess each deserves it's own question for clarity. Here I'm asking for proper ways to handle the data itself. In the original I wrapped each row in a object when fetched from database ( using LINQ to SQL ) somewhat like Active Record just not active or persistence (each app instance had it's own data handling part). The app has subunits handling different aspects. However as it was setup it loaded everything when started. This creates several problems, for example often it wouldn't be neccesary to load a part unless we were specifically going to work with that part so I wan't some form of lazy loading. Also there was problem with inner persistance because you might create a new object/row in one aspect and perhaps set relation between it and different object but the new object wouldn't appear until the program was restarted. Persistance between instances of the app won't be huge problem because of the small amount of people using the program. While I could solve this now using dirty tricks I would rather refactor the program and do it elegantly, Now the question is how. I know there are several ways and a few come to mind: 1) Each aspect of the program is it's own UserControl that get's reloaded/instanced everytime you navigate to it. This ensures you only load up the data you need and you get some persistancy. DB server located on same LAN and tables are small so that shouldn't be a big problem. Minor drawback is that you would have to remember the state of each aspect so you wouldn't always start at beginners square. 2) Having a ViewModel type object at the base level of the app with lazy loading and some kind of timeout. I would then propegate this object down the visual tree to ensure every aspect is getting it's data from the same instance 3) Semi active record data layer with static load methods. 4) Some other idea What in your opinion is the most practical way in WPF, what does MVVM assume?

  Read the article

• Read only array, deep copy or retrieve copies one by one? (Performance and Memory)

  - by Arthur Wulf White

  In a garbage collection based system, what is the most effective way to handle a read only array if such a structure does not exist natively in the language. Is it better to return a copy of an array or allow other classes to retrieve copies of the objects stored in the array one by one? @JustinSkiles: It is not very broad. It is performance related and can actually be answered specifically for two general cases. You only need very few items: in this situation it's more effective to retrieve copies of the objects one by one. You wish to iterate over 30% or more objects. In this cases it is superior to retrieve all the array at once. This saves on functions calls. Function calls are very expansive when compared to reading directly from an array. A good specific answer could include performance, reading from an array and reading indirectly through a function. It is a simple performance related question.

  Read the article

• Is it possible to efficiently store all possible phone numbers in memory?

  - by Spencer K

  Given the standard North American phone number format: (Area Code) Exchange - Subscriber, the set of possible numbers is about 6 billion. However, efficiently breaking down the nodes into the sections listed above would yield less than 12000 distinct nodes that can be arranged in groupings to get all the possible numbers. This seems like a problem already solved. Would it done via a graph or tree?

  Read the article

• associate dhcp requests with subdomains in dnsmasq

  - by Dezra

  I have dnsmasq running as a dns server with a number of linux boxes using static ips that run several virtual hosts on subdomains. I currently have the following address line in my dnsmasq.conf to map the subdomain of a boxes address to the boxes static ip: address=/.devbox1.mydomain.com/192.168.1.3 address=/.devbox2.mydomain.com/192.168.1.4 e.g. site1.devbox1.mydomain.com > maps to devbox1 static ip, site1 virtual host site2.devbox1.mydomain.com > maps to devbox1 static ip, site2 virtual host site3.devbox2.mydomain.com > maps to devbox2 static ip, site3 virtual host I was wondering if I can change the machines over to DHCP addresses (instead of static) and have dnsmasq use the dhcp ip instead of the static one? Can I modify the address line to refer to the DHCP address (obviously, I cant hardcode the address)? I know I could add mac address to ip allocation, but I want to avoid this if possible.

  Read the article

• Preventing Users From Copying Text From and Pasting It Into TextBoxes

  Many websites that support user accounts require users to enter an email address as part of the registration process. This email address is then used as the primary communication channel with the user. For instance, if the user forgets her password a new one can be generated and emailed to the address on file. But what if, when registering, a user enters an incorrect email address? Perhaps the user meant to enter [email protected], but accidentally transposed the first two letters, entering [email protected]. How can such typos be prevented? The only foolproof way to ensure that the user's entered email address is valid is to send them a validation email upon registering that includes a link that, when visited, activates their account. (This technique is discussed in detail in Examining ASP.NET's Membership, Roles, and Profile - Part 11.) The downside to using a validation email is that it adds one more step to the registration process, which will cause some people to bail out on the registration process. A simpler approach to lessening email entry errors is to have the user enter their email address twice, just like how most registration forms prompt users to enter their password twice. In fact, you may have seen registration pages that do just this. However, when I encounter such a registration page I usually avoid entering the email address twice, but instead enter it once and then copy and paste it from the first textbox into the second. This behavior circumvents the purpose of the two textboxes - any typo entered into the first textbox will be copied into the second. Using a bit of JavaScript it is possible to prevent most users from copying text from one textbox and pasting it into another, thereby requiring the user to type their email address into both textboxes. This article shows how to disable cut and paste between textboxes on a web page using the free jQuery library. Read on to learn more! Read More >

  Read the article

• eAccelerator settings for PHP/Centos/Apache

  - by bobbyh

  I have eAccelerator installed on a server running Wordpress using PHP/Apache on CentOS. I am occassionally getting persistent "white pages", which presumably are PHP Fatal Errors (although these errors don't appear in my error_log). These "white pages" are sprinkled here and there throughout the site. They persist until I go to my eAccelerator control.php page and clear/clean/purge my caches, which suggests to me that I've configured eAccelerator improperly. Here are my current /etc/php.ini settings: memory_limit = 128M; eaccelerator.shm_size="64", where shm.size is "the amount of shared memory eAccelerator should allocate to cache PHP scripts" (see http://eaccelerator.net/wiki/Settings) eaccelerator.shm_max="0", where shm_max is "the maximum size a user can put in shared memory with functions like eaccelerator_put ... The default value is "0" which disables the limit" eaccelerator.shm_ttl="0" - "When eAccelerator doesn't have enough free shared memory to cache a new script it will remove all scripts from shared memory cache that haven't been accessed in at least shm_ttl seconds. By default this value is set to "0" which means that eAccelerator won't try to remove any old scripts from shared memory." eaccelerator.shm_prune_period="0" - "When eAccelerator doesn't have enough free shared memory to cache a script it tries to remove old scripts if the previous try was made more then "shm_prune_period" seconds ago. Default value is "0" which means that eAccelerator won't try to remove any old script from shared memory." eaccelerator.keys = "shm_only" - "These settings control the places eAccelerator may cache user content. ... 'shm_only' cache[s] data in shared memory" On my phpinfo page, it says: memory_limit 128M Version 0.9.5.3 and Caching Enabled true On my eAccelerator control.php page, it says 64 MB of total RAM available Memory usage 77.70% (49.73MB/ 64.00MB) 27.6 MB is used by cached scripts in the PHP opcode cache (I added up the file sizes myself) 22.1 MB is used by the cache keys, which is populated by the Wordpress object cache. My questions are: Is it true that there is only 36.4 MB of room in the eAccelerator cache for total "cache keys" (64 MB of total RAM minus whatever is taken by cached scripts, which is 27.6 MB at the moment)? What happens if my app tries to write more than 22.1 MB of cache keys to the eAccelerator memory cache? Does this cause eAccelerator to go crazy, like I've seen? If I change eaccelerator.shm_max to be equal to (say) 32 MB, would that avoid this problem? Do I also need to change shm_ttl and shm_prune_period to make eAccelerator respect the MB limit set by shm_max? Thanks! :-)

  Read the article

• How to get rid of spam that sends from clients own email address?

  - by MeltingDog

  I've Googled everywhere for a solution for this, but though the same issue appears to be happening to a lot of people, I havent found anything that helped. Several of my clients are receiving loads of spam emails with the senders email being their own. The emails subject line is: Environmental corporation searching for representatives worldwide. The emails are not being sent from any scripts in the sites and all the code appears clean. I have also updated the sites CMS. Would anyone know how to get round this issue? Any help is appreciated!

  Read the article

• Are USB thumb drives as vulnerable to memory loss and failure as HDD?

  - by Xavierjazz

  Are USB thumb drives as vulnerable to memory loss and failure as HDD? Ase they Solid State devices? What is their technology? Thanks.

  Read the article

• Which Open Source Licenses can address concerns for an Open Source Game Engine?

  - by Chris

  I am on a team that is looking to open source an engine we are building. It's intended as an engine for Online RPG style games. We're writing it to work on both desktops and android platforms. I've been over to the OSI http://opensource.org/licenses/category to check out the most common licenses. However, this will be my first time going into an open source project and I wanted to know if the community had some insight into which licenses might be best suited. Key licensing concerns: Removing or limiting our liability (most already seem to cover this, but stating for completeness). We want other developers to be able to take part or all of our project and use it in their own projects with proper accreditation to our project. Licensing should not hinder someone's ability to quickly use the engine. They should be able to download a release and start using it without needing to wait on licensing issues. Game content (gfx, sound, etc.) that is not part of the engine should be allowed to be licensed separately. If someone is using our engine, they can retain full copy right of their content, including engine generated data. Our primary goal is exposure, which is why we're going open source to start with. Both for the project and for the individuals developing it. Are there any licenses that can require accreditation visible to players? While I'd put our primary goal as exposure, for licensing the accreditation is less of a concern. From what I've read through (and have been able to understand) it doesn't seem like any of the licenses cover anything that is produced by the licensed software. Are there any that state this specifically, or does simply not mentioning it leave it open for other licensing? Are there any other concerns that we should consider? Has anyone had any issues using any of these licenses?

  Read the article

• How to forward a [sub]domain to another address? (not just HTTP!)

  - by M. Joanis

  Hello everyone! I have bought domain1.me from GoDaddy... (yeah, I know... but ME domain registrars seemed quite hard to find...) I'm mainly hosted at 1and1. I have registered subdomain sub1.domain1.me and redirected it to my 1and1 account. That should eventually work fine. Then I have registered sub2.domain1.me and tried to redirect it to a box at home. It works #1 when for HTTP. I can access SSH server without any problem when I use the IP directly, but not when using sub2.domain1.me:22. The way I see this, they (GoDaddy) are redirecting only on port 80 (why would they?). I have looked at 1and1 forwarding too and they ask for an URI starting with http so I guess that's the same behavior. What are you guys doing to be able to host stuff from home (HTTP, SSH, SVN, Git, etc. etc.) using a domain name to prevent everyone to have to remember your IP??? Heeeelp! Thanks!

  Read the article

• what should a developer know/address to build commercial Android Apps ?

  - by giulio

  Android and mobile development is an exciting area of development. As it is a new discipline, what would be expected of an android developer to build commercially robust applications in terms of skills ? The problem that I and, i think, many other "noobs" into the technology would like to know are the areas of technical skills and the progression to the required advanced topics that goes beyond the the very basics provided by Google. There is a lot of information that's quite useful but its not organised into categories of discipline nor order.

  Read the article

• Why is multithreading often preferred for improving performance?

  - by user1849534

  I have a question, it's about why programmers seems to love concurrency and multi-threaded programs in general. I'm considering 2 main approaches here: an async approach basically based on signals, or just an async approach as called by many papers and languages like the new C# 5.0 for example, and a "companion thread" that manages the policy of your pipeline a concurrent approach or multi-threading approach I will just say that I'm thinking about the hardware here and the worst case scenario, and I have tested this 2 paradigms myself, the async paradigm is a winner at the point that I don't get why people 90% of the time talk about multi-threading when they want to speed up things or make a good use of their resources. I have tested multi-threaded programs and async program on an old machine with an Intel quad-core that doesn't offer a memory controller inside the CPU, the memory is managed entirely by the motherboard, well in this case performances are horrible with a multi-threaded application, even a relatively low number of threads like 3-4-5 can be a problem, the application is unresponsive and is just slow and unpleasant. A good async approach is, on the other hand, probably not faster but it's not worst either, my application just waits for the result and doesn't hangs, it's responsive and there is a much better scaling going on. I have also discovered that a context change in the threading world it's not that cheap in real world scenario, it's in fact quite expensive especially when you have more than 2 threads that need to cycle and swap among each other to be computed. On modern CPUs the situation it's not really that different, the memory controller it's integrated but my point is that an x86 CPUs is basically a serial machine and the memory controller works the same way as with the old machine with an external memory controller on the motherboard. The context switch is still a relevant cost in my application and the fact that the memory controller it's integrated or that the newer CPU have more than 2 core it's not bargain for me. For what i have experienced the concurrent approach is good in theory but not that good in practice, with the memory model imposed by the hardware, it's hard to make a good use of this paradigm, also it introduces a lot of issues ranging from the use of my data structures to the join of multiple threads. Also both paradigms do not offer any security abut when the task or the job will be done in a certain point in time, making them really similar from a functional point of view. According to the X86 memory model, why the majority of people suggest to use concurrency with C++ and not just an async approach ? Also why not considering the worst case scenario of a computer where the context switch is probably more expensive than the computation itself ?

  Read the article

• Oracle Database In-Memory Launch - Featuring Larry Ellison - June 10 - Joint the live webcast!

  - by Javier Puerta

  For more than three-and-a-half decades, Oracle has defined database innovation. With our market-leading technologies, customers have been able to out-think and out-perform their competition. Soon they will be able to do that even faster. At a live launch event and simultaneous webcast, Larry Ellison will reveal the future of the database. Promote this strategic event to customers.  Watch Larry Ellison on Tuesday, June 10, 2014 19:00 – 20:30 a.m. CET  6:00 pm - 7:30 pm UK  Join the webcast here!

  Read the article

• Oracle Database In-Memory Launch - Featuring Larry Ellison - June 10 - Joint the webcast!

  - by Javier Puerta

  For more than three-and-a-half decades, Oracle has defined database innovation. With our market-leading technologies, customers have been able to out-think and out-perform their competition. Soon they will be able to do that even faster. At a live launch event and simultaneous webcast, Larry Ellison will reveal the future of the database. Promote this strategic event to customers.  Watch Larry Ellison on Tuesday, June 10, 2014 19:00 – 20:30 a.m. CET  6:00 pm - 7:30 pm UK  Join the webcast here!

  Read the article

• Is there any way to force my Linux box to always boot up with a self-assigned IP address?

  - by Jeremy Friesner

  This is perhaps an unusual request: I'm trying to get a Debian Linux box to always give itself a self-assigned IP address (i.e. 169.254.x.y) on boot. In particular, I want it to do that even when there is a DHCP server present on the LAN. That is, it should not request an IP address from the DHCP server. From what I can see in the "man interfaces" text, there is an option for "manual", and an option for "dhcp". Manual assignment won't do, since I need multiple boxes to work on the same LAN without requiring any manual configuration... and "dhcp" does what I want, but only if there is no DHCP server on the LAN. (A requirement is that the functionality of these boxes should not be affected by the presence or absence of a DHCP server). Is there a trick that I can use to get this behavior? EDIT: By "no manual configuration", I mean that I should be able to take this box (headless) to any LAN anywhere, plug in the Ethernet cable, and have it do its thing. I shouldn't have to ssh to the box and edit files to get it working each time it is moved to a different LAN.

  Read the article

• How do I change the grub boot order?

  - by chrisjlee

  I've got windows 7 and ubuntu installed on a shared machine. A lot of the non-developers use windows. Currently the order of boot looks like the following (but not word for word) Ubuntu 11.10 kernelgeneric *86 Ubuntu 11.10 kernelgeneric *86 (safe boot) Memory test Memory test Windows 7 on /sda/blah blah How do i change it to default as windows 7 at the top of the list? Windows 7 on /sda/blah blah Ubuntu 11.10 kernelgeneric *86 Ubuntu 11.10 kernelgeneric *86 (safe boot) Memory test Memory test

  Read the article

• How do I Forward root's email to an external email address?

  - by ErebusBat

  I have a small server (Ubuntu 10.04) at my house and I would like to forward root's email to my gmail hosted domain to get security notifications and what not. I ripped everything out and started from scratch and ran into some other issues. I now have sendmail working in the sense that I can mail [email protected] and get the mail. HOWEVER, adding an address to /root/.forward does not actually forward the message. I get the following in my logs: Dec 22 14:04:37 batcave sendmail[4695]: oBML4bAT004695: to=<root@batcave>, ctladdr=aburns (1000/1000), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30075, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (oBML4bJ9004696 Message accepted for delivery) Dec 22 14:04:39 batcave sm-mta[4698]: STARTTLS=client, relay=[69.145.248.18], version=TLSv1/SSLv3, verify=FAIL, cipher=DES-CBC3-SHA, bits=168/168 Dec 22 14:04:40 batcave sm-mta[4698]: oBML4bJ9004696: to=<[email protected]>, ctladdr=<[email protected]> (1000/1000), delay=00:00:03, xdelay=00:00:03, mailer=relay, pri=120336, relay=[69.145.248.18] [69.145.248.18], dsn=2.0.0, stat=Sent (OK 01/D4-00853-216621D4) You can see where my local sendmail instance accepts it then hands it off to my ISP, but with the wrong address ([email protected]).

  Read the article

• How to capture the screen in DirectX 9 to a raw bitmap in memory without using D3DXSaveSurfaceToFile

  - by cloudraven

  I know that in OpenGL I can do something like this glReadBuffer( GL_FRONT ); glReadPixels( 0, 0, _width, _height, GL_RGB, GL_UNSIGNED_BYTE, _buffer ); And its pretty fast, I get the raw bitmap in _buffer. When I try to do this in DirectX. Assuming that I have a D3DDevice object I can do something like this if (SUCCEEDED(D3DDevice->GetBackBuffer(0, 0, D3DBACKBUFFER_TYPE_MONO, &pBackbuffer))) { HResult hr = D3DXSaveSurfaceToFileA(filename, D3DXIFF_BMP, pBackbuffer, NULL, NULL); But D3DXSaveSurfaceToFile is pretty slow, and I don't need to write the capture to disk anyway, so I was wondering if there was a faster way to do this

  Read the article

• Does gunzip work in memory or does it write to disk?

  - by Ryan Detzel

  We have our log files gzipped to save space. Normally we keep them compressed and just do gunzip -c file.gz | grep 'test' to find important information but we're wondering if it's quicker to keep the files uncompressed and then do the grep. cat file | grep 'test' There has been some discussions about how gzip works if it would make sense that if it reads it into memory and unzips then the first one would be faster but if it doesn't then the second one would be faster. Does anyone know how gzip uncompresses data?

  Read the article

• I'm applying for a position at a startup. To whom should I address my cover letter?

  - by sapphiremirage

  One of the co-founders answered questions about the company when the job was posted, but I feel like I shouldn't assume that he's the one who is in charge of hiring. Since it's relatively new and has a lot of name overlap with other things already on the web, it's hard to find any information about the company online, much less the name of their hiring manager. I'm not even certain that they do have a hiring manager, since I seem to remember that they are just an 8 person team. I've heard that "To whom it may concern" is tacky, and normally I would say something along the lines of "Dear Head of Human Resources", but that clearly doesn't work in this case. Any idea what my salutation should be? Later Edits: Final Version: To Joe Programmer and/or the AwesomeStartup.com hiring team, (+ a few words in first paragraph explaining why I am addressing Joe Programmer) I've already sent the email, so nothing you say here will save me. However, feel free to comment on my decision if you think your words be useful to future generations. Old Version (left here because some people responded to it): To the hiring manager for internships at Awesomestartup.com, Additionally, because so many people made comments about the content of my letter: I did spent several hours writing the cover letter itself and making sure that it was awesome. After spending such a long time working on the important part, I asked this question because I wanted to make sure that it wouldn't get passed over by some human who was having a bad day and decided that my salutation was inappropriate. Not likely when the most likely reader of that email is a programmer type, I know, but I figured that it wouldn't hurt not to be sloppy.

  Read the article

• Obtaining the correct Client IP address when a Physical Load Balancer and a Web Server Configured With Proxy Plug-in Are Between The Client And Weblogic

  - by adejuanc

  Some Load Balancers like Big-IP have build in interoperability with Weblogic Cluster, this means they know how Weblogic understand a header named 'WL-Proxy-Client-IP' to identify the original client ip.The problem comes when you have a Web Server configured with weblogic plug-in between the Load Balancer and the back-end weblogic servers - WL-Proxy-Client-IP this is not designed to go to Web server proxy plug-in. The plug-in will not use a WL-Proxy-Client-IP header that came in from the previous hop (which is this case is the Physical Load Balancer but could be anything), in order to prevent IP spoofing, therefore the plug-in won't pass on what Load Balancer has set for it.So unfortunately under this Architecture the header will be useless. To get the client IP from Weblogic you need to configure extended log format and create a custom field that gets the appropriate header containing the IP of the client.On WLS versions prior to 10.3.3 use these instructions:You can also create user-defined fields for inclusion in an HTTP access log file that uses the extended log format. To create a custom field you identify the field in the ELF log file using the Fields directive and then you create a matching Java class that generates the desired output. You can create a separate Java class for each field, or the Java class can output multiple fields. For a sample of the Java source for such a class, seeJava Class for Creating a Custom ELF Field to import weblogic.servlet.logging.CustomELFLogger;import weblogic.servlet.logging.FormatStringBuffer;import weblogic.servlet.logging.HttpAccountingInfo;/* This example outputs the X-Forwarded-For field into a custom field called MyOriginalClientIPField */public class MyOriginalClientIPField implements CustomELFLogger{ public void logField(HttpAccountingInfo metrics,  FormatStringBuffer buff) {   buff.appendValueOrDash(metrics.getHeader("X-Forwarded-For");  }}In this case we are using 'X-Forwarded-For' but it could be changed for the header that contains the data you need to use.Compile the class, jar it, and prepend it to the classpath.In order to compile and package the class: 1. Navigate to <WLS_HOME>/user_projects/domains/<SOME_DOMAIN>/bin2. Set up an environment by executing: $ . ./setDomainEnv.sh This will include weblogic.jar into classpath, in order to use any of the libraries included under package weblogic.*3. Compile the class by copying the content of the code above and naming the file as:MyOriginalClientIPField.java4. Run javac to compile the class.$javac MyOriginalClientIPField.java5. Package the compiled class into a jar file by executing:$jar cvf0 MyOriginalClientIPField.jar MyOriginalClientIPField.classExpected output is:added manifestadding: MyOriginalClientIPField.class(in = 711) (out= 711)(stored 0%)6. This will produce a file called:MyOriginalClientIPField.jar This way you will be able to get the real client IP when the request is passing through a Load Balancer and a Web server before reaching WLS. Since 10.3.3 it is possible to configure a specific header that WLS will check when getRemoteAddr is called. That can be set on the WebServer Mbean. In this case, set that to be X-Forwarded-For header coming from Load Balancer as well.

  Read the article

< Previous Page | 213 214 215 216 217 218 219 220 221 222 223 224  | Next Page >