Search Results

Search found 12431 results on 498 pages for 'errors'.

Page 218/498 | < Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >

• Windows 2008R2 two node failover cluster creation fails

  - by Francois Wolmarans

  We have just installed two Windows 2008R2 Enterprise machines with identical hardware. When running the cluster validation everything is ok. When creating the cluster it fails with the following error: An error occurred while creating the cluster. An error occurred creating cluster 'CLUSTER04'. The parameter is incorrect The logfile on the first node where we are running our config from, does not show any errors. On the second node we get: The Cluster service is shutting down because quorum was lost. This could be due to the loss of network connectivity between some or all nodes in the cluster, or a failover of the witness disk. I've double checked and all communication between the servers are fine. Even when creating a one node cluster it gives the error. There are other failover clusters we have setup without any issues.

  Read the article

• SQLServer 2008 Fails to start under NT AUTHORITY/NETWORK SERVICE account

  - by braincells2pixels

  Not sure what changed but looks like my security credentials have been monkeyed with. Since yesterday evening after I disconnected from our corporate network and rebooted my laptop at home, I am unable to start the instance of SQL2K8. The service is set to run under NT AUTHORITY\NETWORK SERVICE account. The event log records an Access Denied error on the Master.mdf. Switching the account to Local System starts the service but our application runs into security errors. Any clues? TIA

  Read the article

• Running mysqlimport on a MyISAM table for hours, Data_length stays at 0

  - by Yuriy

  I'm trying to import a fairly large file (5Gb, ~130M records) into a MyISAM table (mysql 5.1.61). It's been running for more than 5 hours now with no errors displayed, and I can see "LOAD DATA INFILE ..." in the process list. However, when I run SHOW TABLE STATUS, "Data_length" for the table being updated is still 0. I wonder if that's normal - if not, I should probably abort the import to see what's wrong. "Update_time" displayed by SHOW TABLE STATUS is up-to-date and changes quickly. Is it normal for "Data_length" to remain zero while mysqlimport is successfully running?

  Read the article

• How to install a wiki server

  - by gvalero87

  I would like to install a wiki on my server so I can let people I know to edit documents. So, I don't wan it to be as open as wikipedia. I would like something as google docs (the thing is google docs doesn't handle images and tables on documents very well), doesn't have to be in real time as google does it. The first thing I noticed looking over internet there are different solutions. Maybe what I'm looking for is the easiest one to install. If a want to use the wiki technology don't have to much time investing on errors. Thanks for your opinions

  Read the article

• Backing up Hyper-V VMs using "wbadmin" failing on Windows Server 2012

  - by Ederson

  I'm trying to backup a single VM using "wbdamin". I'm using this command-line: wbadmin start backup -backupTarget:d: -hyperv:VM_Machine_Name -quiet But the backup have no success. Looking at my Events, I get the following information: Source: SSP Event ID: 16387 Level: Error "Writer Microsoft Hyper-V VSS Writer experienced some error during snapshot creation. More info: ." ============================= Source: Backup Event ID: 521 Level: Error "The backup operation that started at '?2014?-?06?-?11T15:38:44.459000000Z' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '0x8100010C'. Please review the event details for a solution, and then rerun the backup operation once the issue is resolved." ============================= Source: VSS No Event Errors. I didn't find any info about "0x8100010C" error code through the web and I'm stuck. Anyone know how to fix this?

  Read the article

• is my ddclient conf right ?

  - by Luc

  Hello, I bought my domain.tld and like to have it points toward my home server. I then created a zoneedit account and setted the zoneedit dns in my domain setting in my registrar web interface. I then installed ddclient on a machine behind my router, with the following conf: Configuration file for ddclient generated by debconf # /etc/ddclient.conf protocol=zoneedit1 use=if, if=eth0 server=www.zoneedit.com login=my_zoneedit_login password=my_zone_edit_password domain.tld When I open a browser and check http://domain.tld I have a site under contruction (from registrar dotsterparking). Is my ddclient conf correct ? Where can I find the errors (while updating my IP) if any ? Thanks a lot, Luc

  Read the article

• SQL Server agent died

  - by Manjot

  3 SQL server agents stopped and didn't restart automatically untill we manually restarted them. SQL servers are on SQL 2005 X86 standard edition. The error message that was reported in Application log was: Faulting application sqlagent90.exe, version 2005.90.4211.0, stamp 49837478, faulting module kernel32.dll, version 5.2.3790.4480, stamp 49c51f0a, debug? 0, fault address 0x0000bef7. No errors were reported in SQL server logs or SQl agent logs. Does anyone know what this means? I tried to Google but no luck. Thanks in advance!

  Read the article

• Recording Skype Video

  - by Leah Peterson

  I have two problems - When doing a Skype video call, I can't see the other person. Skype says both my input and output are fast/good. I need a good recording program that will save both sides at once in a podcast. I've been playing around with Vodburner, but it seems to be very temperamental. I can't get anything longer than 30 seconds to save and even when if it does save, the file isn't compatible with Windows Live Movie Maker, even when I change the extension to .MP4 or .WMV. I tried to downlowd the format changer http://www.mediacoderhq.com/ that Vodburner suggests, but only got errors. I'm using Windows 7 with 62 GB free.

  Read the article

• My server is running out of memory, despite having all swap free

  - by Biohazard

  I am using Debian 6 (Squeeze). The server has 4gb of memory in it, and 8gb of swap. I'm starting to get memory alloc errors at high application load times, but from top command: Mem: 4055944k total, 3915436k used, 140508k free, 10444k buffers Swap: 7999480k total, 0k used, 7999480k free, 3604496k cached The system isn't even trying to use the swap? Why would this be happening? I would like to upgrade the primary memory, but this isn't possible just right now. Thanks.

  Read the article

• Apache service hung and incoming requests not accepted

  - by Gnanam

  Hi, My production server is running Apache v2.2.4 with mod_mono v1.2.4 on CentOS release 5.2 (Final). Suddenly, Apache service hung during normal usage time (approx. 1 pm EDT). Traffic is not too high at this time. This is the first time we're noticing this kind of behaviour in our server. I noticed from access log that even subsequent requests are also not received, even though there were incoming requests. I then manually tried to invoke my application call from web browser, it never returned successfully but it was still loading. I found no unusual behaviour/activity in: 1) Apache access_log and error_log 2) No kernel level errors found in /var/log/messages I've no other option but ended up restarting Apache service. Any idea on what would cause Apache to hang and thereby not allowing subsequent incoming requests? How do I debug/diagnose when this happens next time? Experts advice/recommendation on this are highly appreciated.

  Read the article

• Can I find which script outputs which error?

  - by ibrahim

  There is a script which calls other scripts and they call others... I don't know exactly which scripts are called and how many of them. I only know that some of them are adding iptables rules and I get this error when I call root script. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. My problem is that I can not find which script outputs this errors. Is there any way or tool to learn that?

  Read the article

• Postgres error messages in Apache error log

  - by Warren Pena

  I'm running Apache 2.2, PHP 5.2, and Postgres 8.2 on Windows, and I'm seeing something funky in Apache's error.log file. Occasionally, I'll see the message "row number -1 is out of range 0..-1" pop up over and over. Unlike all the other lines in that log file, there's no timestamp or log level. Just that exact string. Googling around, it appears that message is, character for character, a common Postgres error message, but is not an Apache error. I've seen it happen multiple times, and on several different servers. I can't seem to reproduce it, though. I've tried throwing all sorts of error ridden database queries and result set inquiries at Postgres via PHP, and none of them seem to trigger that line being written to the log file. Is it possible for Postgres errors to be ending up in my Apache log file, and if so, how? What would trigger an error message like that? Thanks!

  Read the article

• SMTP port open - but not open

  - by Frederik Nielsen

  As some of you might know, I am setting up an exchange server. Now I ran into another problem: I cannot connect to the SMTP service from outside the server! The ports are opened in the gateway device (a ZyXEL USG50), Windows firewall is off. I see the packets travekl through the ZyXEL firewall, and I can also see the packets with wireshark on the server, so I know they are getting all the way in to the server. I also know it receives them, and sends out the reply - and this is where things go bad! Analyzing with wireshark, I get these errors in the return packets: Header checksum: 0x0000 [incorrect, should be 0x0779 (may be caused by "IP checksum offload"?)] And: Acknowledgment Number: 0x8e3337d1 [should be 0x00000000 because ACK flag is not set] What the (sorry my French) hell is going on? I really cant figure it out.. Thanks in advance.

  Read the article

• What's constitute an entry on the IPTables and how to find out which client it is originated from

  - by cbd

  I have a Billion BiPac 7700N Modem/Router/Access Point and I connect another router (TP-Link TL-WR1043ND) in wan-bypass mode to extend the wireless coverage. Lately, I noticed that the connection through TP-Link has been dropping out quite regularly. Having read some posts on the Internet, I checked system log on 7700N and found that there are many "nf_conntract: expectation table full" errors, which I suppose the iptables are full. My questions: What does constitute an entry on the iptable? Is it a client or a connection (which means one client can have multiple connections) How could I find out where are those connections originated from? Note: Many reported that the issue is usually related to having torrents running but I don't have any torrents running. Thank you.

  Read the article

• Exchange 2013 Internal Relay via Smart Host

  - by Matt Clements

  Thank you for your help in advance! I am currently setting up an Exchange 2013 server, to replace our old POP3/SMTP system, however we would like to roll this out gradually when convenient for our staff. Our plan is therefore: Setup Exchange 2013 to retrieve email via POP Connector - Done Setup Exchange 2013 to send ALL mail via a SmartHost - Issues I have set the domains in Mail Flow Accepted Domains to Internal Relay, enabled a Smart Host for * as the domain name, and disabled/deleted the accounts that are not setup yet; however Exchange just bounces the emails with no errors.

  Read the article

• MySQL moving ibdata & ib_logfile

  - by XoR

  I'm trying to move ibdata & ib_logfile on ssd drive. I tried this way, but it don't work: service mysql stop cd /var/lib/ cp -ra mysql mysql_backup cp -a mysql/ibdata1 mysql/ib_logfile* /ssd_drive/mysql my.cnf looks like this (relevant parts): innodb_log_group_home_dir=/ssd_drive/mysql innodb_data_home_dir=/ssd_drive/mysql After all changes I get following errors: InnoDB: Unable to lock /ssd_drive/mysql/ibdata1, error: 13 InnoDB: Check that you do not already have another mysqld process Do I need to remove some lock files, or there is something else that I forgot... Also I setup mysql apparmor so it can rw on this directory, and rebooted afterward: /usr/sbin/mysqld { ................. /ssd_drive/mysql/* rw, ................. }

  Read the article

• Proper way for changing MAC address in a linux VM?

  - by HappyDeveloper

  I tried to change the MAC address in a ubuntu VM (virtualbox), but after that it threw lots of errors during boot, and then I had no internet connection. Then I saw that the interface was renamed to eth1, so I edited /etc/network/interfaces to change eth0 to eth1, rebooted (didn't know how to restart the network), and boot was now faster and internet worked fine. But now after every time I log in, I get 1 or 2 error messages that say nothing, they only ask me if I want to report them. So I was wondering, is there was a proper way to change MAC address, to avoid these issues?

  Read the article

• Filemaker 10 Advanced sending email via script & SMTP

  - by Sean

  We are using a windows server box to run the databases but we have found via the headers that the emails are send from the local workstation. We have moved to a new email system and have set up a local linux server to securely send email out of our network to devices that do not support new protocols and encryption. But once we set up the script in filemaker 10 advanced (the local machine os x) we set it to the ip of our local box with no authentication but it does not send out an email. It creates a connection we see in the logs on the linux box but nothing more, additionally you can start a telnet connection with no issues. We have also made sure that there are no additional issue that we can see in our firewall policies. Any ideas where we should start? Does Filemaker 10 advanced log errors anywhere because I could not find any log files.

  Read the article

• Vista locks up after ~10h. of activity

  - by Naomi

  Hi everybody, I am experiencing a problem: Windows Vista completely freezes/locks up lately... It happened today twice - the mouse and keyboard stopped responding and I had to re-boot. I checked the Application Events Log and I see these two errors: Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected. and then The following boot-start or system-start driver(s) failed to load: SASDIFSV SASKUTIL I checked Help online and it points to http://technet.microsoft.com/en-us/library/cc756390%28WS.10%29.aspx and suggests Updating the drivers. I'm not sure why would I have problem with drivers and if so, how can I find out which drivers to update? Can you please help me? Thanks in advance.

  Read the article

• Help make sense of a KillDisk error/log

  - by user284194

  I have a hard drive that I've been trying to reformat. I tried reformatting it in the windows XP and 7 installers, and in an Ubuntu live cd with gparted. I tried using dd to 'zero' the drive as well with no success. Finally I ran across KillDisk after a search. I tried to zero the disk again with KillDisk and after 8 hours of zeroing I get the following errors in the log: ----------------------------------------Erase Session Begin--------------------------------------- 2010-03-23 19:35:54 Active@ KILLDISK for Windows Build 5.1.39 started Target: WDC WD2500KS-00MJB0 232.9 GB Located on: WDC WD2500KS-00MJB0 (Serial number: WD-WCANK9604799) Erase method: One Pass Zeros (1 pass) Passes: 1 Bad (unwritable) sectors detected from 1701 to 488397167 on Hard Disk 1. Error (the handle is invalid) refreshing device Hard Disk 1. Error (the handle is invalid) reading sector 0 on 81h. 2010-03-24 02:28:25 Total number of erased device(s): 0, partition(s): 0 -----------------------------------------Erase Session End---------------------------------------- Is the drive dead?

  Read the article

• Microsoft Excel 2013

  - by Dan LaMoreaux

  We use a spreadsheet as our timecards. The template is stores on the server with links to it on the individual Desktops. I am trying to figgure out the VB so that wnen the cell for username (B5) is blank, the VB will place next sundays date in (B7). After the user enters thier name in B5, I need it to not change B7 again. If I use a formula in B7 "=IF(B5="",TODAY()+8-WEEKDAY(TODAY()),B7)" i need to enable the curcular calcualtions, which don't follow from the template to the spreadsheet, thus causing errors for every individual. Corporate says that they need to be in Excel, because of the import software. Otherwise I'd use Word and the "CreateDate" function. I've been trying to learn the VB to do it, but I was hoping that soem expert could whip out the code in 5 min. flat and just let me disect it.

  Read the article

• Will disk cloning resolve bad stripes on RAID?

  - by user13323

  Hi. We have a logical RAID1 drive in bad stripes state, which kept that status even after replacement and rebuilding of both drives, and gives errors in Windows logs about failure of writing to disk. IBM support suggests erasing and re-creating the RAID, then re-installing the Windows. The resulting down-time unacceptible for us, so we want to clone the RAID (via Acronis True Image), erase and re-create the RAID, then dump the cloned data back. Following IBM logic where RAID erasing and re-creation resets the whole RAID meta-data, this should clear the bad-stripes status, and start from a blank page. Question is if such strategy is possible, and will produce the desired effect? Any idea is appreciated - thanks in advance!

  Read the article

• Why does iis produce 500 response on all requests?

  - by HMR

  In IIS 7.5 on Windows webserver 2008 I get a 500 response on any request. Checking in firebug if I'm being forwarded but the request is made and no forwarding, just get 500 response with a page that looks like Symfony response page. Disabled all url re writes and requested index.html (still get 500) checked error pages under featured settings and detailed errors is checked. Checked the php error log and no writes have been made for several days. I think someone has fiddled with the IIS server settings and got it to return 500 for any request (even locally) but I'm not able to find what it is. [UPDATE] While I was writing this and listing things I've tried I tried selecting detailed error messages at the root node, not the site node. Looks like some idiot changed file permissions so that IIS can no longer read the config file.

  Read the article

• IIS Logs not getting created

  - by Chris

  Hi I have a site running on IIS 6. I have turned on logging on the website tab of IIS and specified a directory for it to write to. Set it to an hourly schedule. However no logs are ever created. Have reset iis. checked disk space and permissions on the directory it is writing to but no logs are ever created. I can see this did work once, as there are logs created in the system32/logfiles directory from about a year ago. Even if I specify that directory nothing new gets created This is on a hosted service What else can I check? Is there any place that errors would be written to that might give me a clue as to what is going on? Have tried event viewer but nothing untoward in there Would appreciate any pointers on this

  Read the article

• Disk full, du tells different. How to further investigate?

  - by initall

  I have a SCSI disk in a server (hardware Raid 1), 32G, ext3 filesytem. df tells me that the disk is 100% full. If I delete 1G this is correctly shown. However, if I run a du -h -x / then du tells me that only 12G are used (I use -x because of some Samba mounts). So my question is not about subtle differences between the du and df commands but about how I can find out what causes this huge difference? I rebooted the machine for a fsck that went w/out errors. Should I run badblocks? lsof shows me no open deleted files, lost+found is empty and there is no obvious warn/err/fail statement in the messages file. Feel free to ask for further details of the setup.

  Read the article

< Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >