Search Results

Search found 12431 results on 498 pages for 'errors'.

Page 222/498 | < Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >

• Slow file operations, possible I/O error but chkdsk says OK

  - by mikolajek

  I've recently faced a strange problem. I use Directory Opus file manager that suddenly started to report an I/O error when trying to copy files onto one of my disks. The Windows Explorer did copy those files but it was extremely slow. I run chkdsk on this drive (ca. 300GB) and it took it over two days to complete! However it reported no errors found. I run Hard Disk Sentinel that says the drive is OK. But the files still read and write extremely slow! Can anyone advise me what to do? I have a spare space I am copying my files for backup now but should I get rid of this disk? Or can I try to "heal" it somehow? Many thanks for your ideas!

  Read the article

• md5sum repeatedly gives different checksum for same file on same machine

  - by Joel

  I have a very small and quite old hard drive disk, about 32G. On to this disk I have copied a largish tar file, about 5G. When I run md5sum to generate a checksum on this file I repeatedly get different results (on the same machine and the same file). This obviously should not happen. If I repeat the experiment with a much smaller file, as expected the checksum is the same each time. I can only assume that because the large file is spanning most of the disk, and it is an old drive, I am experiencing a lot of read errors on the hard drive - and it needs replacing? Could there be any other good reason for this? Something I can do to fix the problem other than buying a new disk? Update: sha1sum also produces inconsistent results.

  Read the article

• HAProxy MySQL Failover is not starting

  - by thiesdiggity

  I am trying to setup HAProxy with MySQL failover with Ubuntu. I used a setup similar to this serverfault question, however I am getting the following error when starting haproxy: [ALERT] 341/220001 (17405) : parsing [/etc/haproxy/haproxy.cfg:29] : unknown option 'mysql-check'. [ALERT] 341/220001 (17405) : Error(s) found in configuration file : /etc/haproxy/haproxy.cfg [ALERT] 341/220001 (17405) : Fatal errors found in configuration. I even tried installing the lastest version of HAProxy (1.4.22). Does anyone know how to fix this? I have Google'd the heck out of it and can't find any solution. Thanks for your time!

  Read the article

• starting nginx via upstart

  - by Chiggsy

  Background: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=10.04 DISTRIB_CODENAME=lucid DISTRIB_DESCRIPTION="Ubuntu 10.04 LTS" I've built nginx, and I'd like to use upstart to start it: nginx upstart script from the site: description "nginx http daemon" start on runlevel 2 stop on runlevel 0 stop on runlevel 1 stop on runlevel 6 console owner exec /usr/sbin/nginx -c /etc/nginx/nginx.conf -g "daemon off;" respawn I get "unknown job" when i try to use initctl to run it, which I just learned apparently means there is an error, ( what's wrong with "Error" to describe errors?) Can someone point me in the right direction ? I've read the documentation , as it is, and it seems kind of sparse for a SysV init replacement... but whatever just need to add this job to the list, run it, and get on with what's left of my life... Any tips? EDIT: initctl version init (upstart 0.6.5)

  Read the article

• Can you set CIFS permisions from EMC Command Line?

  - by TJ.

  I am in the process of migrating file shares from my EMC NS-20 to my new VNXe 3100. I am using a RoboCopy script to move the files but am getting errors on some files and folders. I have Domain Admin privileges but when I go to view the security permissions on the folders it says I don't have permissions. I have tried taking ownership to get around the permissions issue but that fails too. So as a last resort can I set permissions on this folder from the EMC console or Web management console?

  Read the article

• Generate a certificate with Openssl and import the same certificate using keytool

  - by Safari

  I have a question about the SSL during the use of CAS in LIferay. I have generate the certificate using Openssl (I flollowed this tutorial) on my CAS Server and now I would to import the certificate using keytool on the Liferay machine. To import the certificate with keytool I use this command: keytool -import -alias tomcatLiferay -file /myopensslcertificate.crt But when I import the .crt certificate file and I check the CAS connection I get the message: SSL Error. IF I try to generate the certificate using keytool (keytool -genkey...) on the CAS server end I import this certificate using keytool -import .... I can connect to the CAS server and I not see any errors... I think that I use a wrong way to generate the certificate with openssl or a wrong way to import the certificate (generated with openssl) with keytool.

  Read the article

• /tmp/ read-only

  - by Chirag

  When I'm trying delete some of the old eaccelerator files it gives me following errors rm: cannot remove `/tmp/eaccelerator/7/2/eaccelerator-0502.02065984': Read-only file system What can I do it fix it? Filesystem Size Used Avail Use% Mounted on /dev/sda2 226G 127G 88G 60% / /dev/sdc1 227G 102G 114G 48% /disk1 /dev/sda1 99M 18M 77M 19% /boot tmpfs 4.0G 0 4.0G 0% /dev/shm /dev/sdb1 459G 182G 255G 42% /home4 /usr/tmpDSK 485M 325M 135M 71% /tmp That's my output from the server. Also what commands can I use to unmount and mount it? And should I do it while my web server is running?

  Read the article

• Sub-process /usr/bin/dpkg returned an error code (1)

  - by rohit

  Hey friends i am getting the following error when i am trying to purge shorewall root@aptosid:/etc# apt-get purge shorewall Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: shorewall* 0 upgraded, 0 newly installed, 1 to remove and 3 not upgraded. 1 not fully installed or removed. After this operation, 1,843 kB disk space will be freed. Do you want to continue [Y/n]? (Reading database ... 212702 files and directories currently installed.) Removing shorewall ... : not found/shorewall: 25: /etc/default/shorewall: :q Stopping "Shorewall firewall": not done (check /var/log/shorewall-init.log). invoke-rc.d: initscript shorewall, action "stop" failed. dpkg: error processing shorewall (--purge): subprocess installed pre-removal script returned error exit status 1 configured to not write apport reports Errors were encountered while processing: shorewall E: Sub-process /usr/bin/dpkg returned an error code (1) root@aptosid:/etc# please help me out ...........?

  Read the article

• Reviewing firewall rules

  - by chmeee

  I need to review firewall rules of a CheckPoint firewall for a customer (with 200+ rules). I have used FWDoc in the past to extract the rules and convert them to other formats but there was some errors with exclusions. I then analyze them manually to produce an improved version of the rules (usually in OOo Calc) with comments. I know there are several visualization techniques but they all go down to analyzing the traffic and I want static analysis. So I was wondering, what process do you follow to analyze firewall rules? What tools do you use (not only for Checkpoint)?

  Read the article

• GTA 4 crashes while trying to run it

  - by Damian

  Hi! I got those two errors when I'm trying to run GTA4: Description: Critical runtime problem Problem signature: Event Name Problem: APPLICATION CRASH System RAM: -1 Available RAM: -532590592 Number of CPUs: 4 Video Card Manufacturer: NVIDIA Video Card Description: NVIDIA GeForce 9800 GT Video Card Driver Version: 8.17.0012.5919 Version system OS: 6.1.7600.2.0.0.256.1 ID settings Regional: 1045 And the second error: Problem signature: Event Name Problem: BEX Name Application: GTAIV.exe Version Application: 1.0.7.0 Timestamp Application: 4bd9efbe Module Name error: StackHash_fea7 Module Version with the error: 0.0.0.0 Timestamp module with error: 00000000 Exception Offset: 0000b513 Code exception: c0000005 Data exception: 00000008 System Version OS: 6.1.7600.2.0.0.256.1 ID settings Regional: 1045 Additional Information 1: fea7 Additional information 2: fea78afc140967119290cc27385e0510 Additional Information 3: 20ce Additional Information 4: 20ce3e492a2aa7e5b8cfe9b7b1f05b42 My PC spec: Proc: Intel i5 (4x2,66ghz) RAM: 8GB DDR3 1066mhz Graphics: ASUS EN9800GT/DI/1GD3 OS: WINDOWS 7 64-bit I think it should work well on my PC, I couldn't find the solution to get it working so I hope You can help me. P.S. Sorry for my English - I'm from Poland.

  Read the article

• Preparing Automatic Repair appears out of nowhere & takes forever?

  - by Jörg B.

  I shutdown my work machine (Windows 8.1 Pro) without any errors appearing (and without installing any new software and especially no new drivers the last couple days) yesterday evening, turned it on this morning and it automatically started into 'Preparing Automatic Repair' mode. 1st of - is there any way to get more information WHY this is appearing out of the blue and.. 2ndly, how long is this usually supposed to take? This is a rather beefy machine (Intel 3770k / 4 core 3.9ghz, Intel SSDs only and 32 gb of ram) but this screen has been 'loading' for almost 1.5 hours now. Is there any sort of debug/verbose mode that would give me ANY indication what's going on?

  Read the article

• Not enough storage is available to process this command

  - by Mohit

  I am getting this error on almost all of the operations on a Windows 7 pro 32 bit machine. By operations I mean anything I do. Update a repo from subversion. Access a local IIS Site. Copy a big folder. Run an installer.and sometime if I try again. It get solved. I think there is something wrong wit windows7 . I searched around and found posts suggesting to increase IRPStackSize value in registry I did that no Luck. I am using Microsoft Security Essentials Version: 1.0.1961.0 as my antivirus package Once this errors starts popping up. I have to restart and then in after some random time. It starts showing up again. Any help is appreciated. I am losing lot of my time in restarting my system or retrying again and again.

  Read the article

• Group policy issues

  - by Alex Berry

  We are having an issue on one of our clients relatively new sbs installs. The domain consists of a single SBS 2011 server with 4 windows 7 clients and 3 xp clients. Most of the time everything is fine however roughly every 3 days windows 7 clients start timing out when trying to receive computer group policy. This results in hour long delays before getting to the login screen in the morning. This is accompanied by event ID 6006, win login errors stating it took 3599 seconds to process policy. Once they've booted they can log in without issue however gpupdate fails again on computer policy and gpresult comes back with access denied, even when run as domain admin... At this point if we restart the server the network is fine for 3 days. I thought perhaps it might be ipv6 or smb2, but disabling ipv6 on the clients doesn't help and the clients can browse the sysvol folder freely on smb2 anyway. Does anyone have any ideas or routes I can take to further diagnose the issue? Thanks in advance :)

  Read the article

• Google Chrome never renders fonts properly / no smoothing etc

  - by Christian Ivicevic

  A while ago I started using Chrome and no longer Firefox, however I found out something weird which maybe force me to return to Firefox if I can not fix this. I am coding a homepage and the output was in Chrome ugly, in Firefox not. I thought "ok this is maybe due to bad code"... however I found out that the same problems occurs on different sites like Facebook too. The font is not smoothed and it is not nice to read. Here is an example, although I have censored nearly everything... Bad Chrome Rendering Good Firefox Rendering You may need to open up in a new tab to see the errors in detail. Now I want to know, whether this is just Chrome trolling me or maybe something else. EDIT I tried it out under Ubuntu on my PC and it works well... seems to be an error on Windows/Chrome on Windows.

  Read the article

• Windows XP SP3 TCP/IP No buffer space available

  - by Natalia

  I have the exactly same problem as here: Windows XP TCP/IP No buffer space available On Windows XP Pro, SP3 if one does an experiment where one tries to open TCP/IP sockets in a loop (bascially, listen port 7000, listen port 7001, etc.) After approx 649 open sockets, one will start getting errors: No buffer space available (maximum connections reached?) I've tried to edit the registry as described here http://smallvoid.com/article/winnt-tcpip-max-limit.html I set MaxUserPort = 65534 and MaxFreeTcbs = 2000, but it didn't help. What else can I do? I need 1000 server sockets. Here is the error stack: 05.04.2012 10:23:57 java.net.SocketException: No buffer space available (maximum connections reached?): listen at sun.nio.ch.ServerSocketChannelImpl.listen(Native Method) at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:127) at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:59) at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:52) at channelserver.NIOAppServer.initSelector(NIOAppServer.java:40) at channelserver.NIOAppServer.(NIOAppServer.java:27) at channelserver.NIOServer.main(NIOServer.java:433) at channelserver.NIOServer.main(NIOServer.java:438)

  Read the article

• How to stop a Linux LVM volume group?

  - by thkala

  I am currently dealing with a multiple disk failure on a Linux LVM Volume Group that is backed up by a RAID-5 md device. One disk has been taken out completely and another one is showing a limited number of corrupt sectors, due to what seems to have been a misbehaving power supply. The problem is that once an I/O error hits, md takes the array down, since it does not have enough devices for it to be operational. Where md the only one involved, I could mdadm --stop the array and then recreate it to get all devices active again. Unfortunately, the array is a PV in an LVM volume group and I cannot seem to get the kernel to release it. vgchange -an does not seem to do anything, bar spew out a couple of I/O errors. I am obviously missing something, but how in the name of -insert-favorite-deity- do I get LVM to release the underlying PV without rebooting the server?

  Read the article

• Windows 8.1 won't accept my Media Center Pack Product Key

  - by Daniel

  I just installed Windows 8.1 Pro as an upgrade from an ISO torrent. I was able to activate my original Windows 8 key successfully. However, I tried to activate my Media Center Pack key that I purchased for Windows 8 and it errors out the first try. When I try to activate it again, it then says "This key won't work. Check it and try again, or try a different key.". Do I have to purchase the key again? Thanks

  Read the article

• Report Builder 2.0 - Creating DataSet - User Not Authorized

  - by Fahad

  Hello, we are currently using SQL Server Reporting Services and we would like to use Report Builder so our customers can create reports themselves. I have created a User on the server. I have added this user to the SQLServerMSSQLUser and SQLServerReportServerUser groups. I have given this User db_datareader access to the required database and to the Reporting Services database. I've also tried giving the User db_owner access to the Reporting Services db's. And on the Report Manager, this User is a System_User, but has all access (every checkbox is checked). When I connect using Report Builder, I can select the Report Model to create a DataSource, but when I try to create a DataSet, I get the following error: An error occurred while connection to datasource 'DataSource1'. The details are: 'User Not Authorized'. Does anyone know what server permissions I forgot to set? I'm assuming it's a Windows permissions issue because I do not see any database login errors in the event logs.

  Read the article

• Xerox Workcentre 3119 and Linux

  - by Milan Babuškov

  I'm trying to get Xerox Workcentre 3119 printer to work on Linux. It's a multifunction device (printer and scanner). I run the CUPS web interface at: http://localhost:631/ and it recognizes it on USB port and even suggests Gutenprint driver from the list. When I try to print a test page, the printer goes through "warming up" process (i.e. lights blink and sound is heard) but does not print anything. There are no errors in /var/log/cups/error_log and access_log shows as if everything is ok. The printer works fine in Windows XP. Does anyone have any experience with this printer on Linux?

  Read the article

• Canot send SMS using gammu-smsd

  - by khalid hussain

  I am trying to send SMS using gammu-smsd, but it does not work. Modem: Huawei E1550 Steps: #vi /etc/gammu-smsdrc port= /dev/ttyUSB0 connection = at Then restarted gammu-smsd: # /etc/init.d/gammu-smsd restart SMS Sending test echo "Test message" | gammu-smsd-inject TEXT 335123456 It does not send SMS. Log Sep 27 14:19:25 Dell-Laptop gammu-smsd[10285]: Going to 30 seconds sleep because of too much connection errors Sep 27 14:19:55 Dell-Laptop gammu-smsd[10285]: Starting phone communication... Sep 27 14:19:55 Dell-Laptop gammu-smsd[10285]: Error at init connection: Error opening device, it doesn't exist. (DEVICENOTEXIST[4])

  Read the article

• Can't connect using Jail SFTP account

  - by Fazal

  I've been following this tutorial "Limiting Access with SFTP Jails on Debian and Ubuntu" and whilst I've had no errors setting it up, I've had issues on Ubuntu 10.04LTS logging in as a user on a virtualhost. I've changed my SSH port to 22022, and enter all the credentials when attempting to login. I ran these commands to add a user to the virtualhost: # useradd -d /srv/www/[domain] [username] # passwd [username] # usermod -G filetransfer [username] # chown [username]:[username] /srv/www/[domain]/public_html I should add that this is the only time I've setup the user they have no other /home directories or such. The directory that does exist is at /srv/www/example.com/public_html When I try using a desktop package such as cyberduck to login to the site, I keep getting a "Login failed with this username or password". I am completely lost as what to do next... The reason why I'm trying this method is because I want my clients to use SFTP and not FTP to upload files to their websites. Any help or direction is appreciated.

  Read the article

• mod_rewrite rules to run fcgi for different subdomains

  - by Anthony Hiscox

  On my shared hosting server (Hostmonster) I have django (actually pinax) setup so that a .htaccess mod_rewrite rule rewrites the request to a pinax.fcgi file: RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*)$ pinax.fcgi/$1 [QSA,L] What I would like to do is have a different pinax.fcgi file get called depending on the domain used (or subdomain), something like this: RewriteCond %{HTTP_HOST} ^subdomain\.domain\.com$ [NC] RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*)$ pinax2.fcgi/$1 [QSA,L] RewriteCond %{HTTP_HOST} ^domain\.com$ [NC] RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*)$ pinax.fcgi/$1 [QSA,L] This is stored in a .htaccess file in my ROOT public_html folder (not in the public_html/subdomain/ folder), but unfortunately just results in internal redirect errors. How can I write these rules so that they use a different fcgi file for different domains?

  Read the article

• Setting up mutt for gmail

  - by highBandWidth

  I am trying to set up mutt for gmail. I am following instructions at http://crunchbanglinux.org/wiki/howto/howto_setup_mutt_with_gmail_imap, however, after putting set from = "[email protected]" set realname = "Your Real Name" set imap_user = "[email protected]" set imap_pass = "yourpassword" (with my details, of course), I get $ mutt Error in $HOME/.muttrc, line 12: imap_user: unknown variable Error in $HOME/.muttrc, line 13: imap_pass: unknown variable source: errors in $HOME/.muttrc Press any key to continue... If I try to send an email, it doesn't work because instead of IMAP, it tries to send email directly from my localhost's mail system. Mutt says it is version Mutt 1.4.2.3i.

  Read the article

• Are folders and filenames starting with "icon" illegal in SMB?

  - by dash-tom-bang

  Are five letter filenames starting with "icon" illegal in SMB? I just got a Drobo FS, in part to back up the computers in my house, and it does not accept folders named 'icons', 'iconv', or indeed I tried a bunch of other icon plus one letter names. I got errors on creation of these folders although now I don't remember the exact error. It has been confirmed with Drobo support that they "veto" files and folders named like this, due to them being illegal in the SMB spec. My Google skills so far have not been sufficient to turning any information on this up, however, so I wonder if anyone knows what's up? Sadly I can create these files and folders from my Mac, which I guess connects using AFP? But then I can't see them on my Windows machines. This is of little help if it is my Windows machines that I want to back up, and those being the ones with folders named like this. Thanks.

  Read the article

• Replicating EFS encrypted files

  - by floyd

  Recently I attempted to configure Microsoft's DFSR on Windows 2008 R2 to replicate a folder which was encrypted with EFS. The setup gave no errors or warnings, but later I read that DFSR does not support EFS in any way. There were also event logs in the DFSR event log indicating an encrypted file was found and wont be replicated. http://technet.microsoft.com/en-us/library/cc773238(v=ws.10).aspx#BKMK_052 My question is, are there any tools that would allow this to occur? Software based preferably.This would be replicating over LAN to destination node for two servers on the same domain.

  Read the article

< Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >