Search Results

Search found 17129 results on 686 pages for 'wifi configuration'.

Page 221/686 | < Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >

• Can only bring up one of two interfaces

  - by mstaessen

  I'm having a bizarre issue with my HP Proliant DL 360 G4p server. It has two gigabit ethernet interfaces but I can bring up only one of them. This is starting to freak me out and that's why I turned here. I'm running the x64 ubuntu 11.10 server edition. lshw -c network shows that the second interface is disabled. I have no idea why ans how to enable it. $ sudo lshw -c network *-network:0 description: Ethernet interface product: NetXtreme BCM5704 Gigabit Ethernet vendor: Broadcom Corporation physical id: 2 bus info: pci@0000:02:02.0 logical name: eth0 version: 10 serial: 00:18:71:e3:6d:26 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 66MHz capabilities: pcix pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 duplex=full firmware=5704-v3.27b, ASFIPMIc v2.36 ip=10.48.8.x latency=64 link=yes mingnt=64 multicast=yes port=twisted pair speed=100Mbit/s resources: irq:25 memory:fdf70000-fdf7ffff *-network:1 DISABLED description: Ethernet interface product: NetXtreme BCM5704 Gigabit Ethernet vendor: Broadcom Corporation physical id: 2.1 bus info: pci@0000:02:02.1 logical name: eth1 version: 10 serial: 00:18:71:e3:6d:25 capacity: 1Gbit/s width: 64 bits clock: 66MHz capabilities: pcix pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 firmware=5704-v3.27b latency=64 link=no mingnt=64 multicast=yes port=twisted pair resources: irq:26 memory:fdf60000-fdf6ffff If I try to ifup eth1, then I get $ sudo ifup eth1 Ignoring unknown interface eth1=eth1. I figured that's what happens when there is no eth1 listed in /etc/network/interfaces. But when I add the configuration for eth1, I still can't ifup. $ sudo ifup eth1 RTNETLINK answers: File exists Failed to bring up eth1. I've also tried ifconfig eth1 up but without any result. For clarity, I have added a masked version of /etc/network/interfaces. I don't think it is the cause of the problem though. $ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 10.48.8.x netmask 255.255.255.y network 10.48.8.z broadcast 10.48.8.t gateway 10.48.8.u auto eth1 iface eth1 inet static address 193.190.253.x netmask 255.255.255.y network 193.190.253.z broadcast 193.190.253.t gateway 193.190.253.u I really need some help fixing this. It's driving me crazy. Thanks.

  Read the article

• Wireless problems on HP

  - by Sat93

  I'm not able to enable Wireless using the hardware switch on my HP ProBook4430s. Because of this the Enable Wireless option is greyd out and I cannot enable it. The greyd out option can be seen in the screenshot below. The results of iwconfig for my system are as follows, lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off eth0 no wireless extensions. Also I tried to do the following, sudo ifconfig wlan0 up but I got an error as below, SIOCSIFFLAGS: Operation not possible due to RF-kill Also the result of sudo rfkill list all for my system is as follows, 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 2: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 3: hci0: Bluetooth Soft blocked: no Hard blocked: no How do I fix this problem? Thanku!

  Read the article

• puppet agent doesn't retrieve files from master

  - by nicmon

  I have a very basic question regarding to Puppet 3.0.1 configuration. I setup a puppet master server (CentOS) with 2 agents (CentOS and Windows 7), all 3 can ping and access each other. There is no error at all. I have copied a file under /etc/puppet/files/test2.txt my site.pp (/etc/puppet/manifests) contains these lines: node default { include test file { "/tmp/testmaster.txt": owner => root, group => root, mode => 644, source => "puppet:///files/test2.txt" } } but there will no file be created on agent servers under /tmp/ once I run "puppet agent --test" here is the output: [root@agent1 ~]# puppet agent --test Info: Retrieving plugin Info: Caching catalog for agent1.mydomain.com Info: Applying configuration version '1354267916' Finished catalog run in 0.02 seconds "puppet apply /etc/puppet/manifests/site.pp" creates the testmaster.txt under /tmp/ on master.

  Read the article

• Getting wireless to work on Ubuntu 11.10 (on a mac machine)

  - by yayu

  I have a 2008 white 13.3 inch macbook that now solely runs ubuntu. However, I cannot get wifi or cable to work on it. Regarding the cable, it atleast tries to connect but eventually disconnects from the wired network. Here is the output for lspci (pastebin) I tried installing b43-fwcutter and firmware-b43 but get errors. (I loaded them from a thumb drive and tried sudo dpkg -i). I cannot understand these instructions from the documentation, as I cannot locate the pool directory. b43-fwcutter is located on the Ubuntu install media under ../pool/main/b/b43-fwcutter/ and patch is located under ../pool/main/p/patch/ or both in the official repositories online. Note: In some versions (10.04 and 11.04 at least) there is not a /pool/main/p/patch/ If this file is missing then you don't need it. In this case you only need to install /pool/main/b/b43-fwcutter by following the instructions below.

  Read the article

• IIS7 folder permissions

  - by Eanna

  I build a basic WCF service that I now want to host in IIS7 under Windows Server 2008 R2. I added the service as an application under the default web site but whenever i try to run the application I get the following error: HTTP Error 500.19 - Internal Server Error The requested page cannot be accessed because the related configuration data for the page is invalid. Config Error - Cannot read configuration file due to insufficient permissions The only way I can get this service working is if i choose to "connect as" the server Administrator when adding the service. the "application user (pass-through authentication)" option does not seem to work. Could anyone help me out, I've just started using IIS7 and have no idea what to do... Thanks

  Read the article

• SEO, IIS 7 and web.config in subfolder issue

  - by tesicg

  We have ASP.NET application that has sub-folder with .aspx pages and separate web.config file in it. The .aspx pages in that sub-folder behave as separate site. In the web.config file at application level, I set the rule that removing trailing slashes: <rewrite> <rules> <rule name="RemoveTrailingSlashRule1" stopProcessing="true"> <match url="(.*)/$" /> <conditions> <add input="{REQUEST_FILENAME}" matchType="IsDirectory" negate="true" /> <add input="{REQUEST_FILENAME}" matchType="IsFile" negate="true" /> </conditions> <action type="Redirect" redirectType="Permanent" url="{R:1}" /> </rule> </rules> </rewrite> I expect this rule will propagate downward to sub-folder as well. To access the site in sub-folder we should type: http://concert.local/elki/ and get it without trailing slash as: http://concert.local/elki But, the trailing slash remains. The web.config file in sub-folder looks as following: <configuration> <system.webServer> <defaultDocument> <files> <add value="Sections.aspx" /> </files> </defaultDocument> </system.webServer> </configuration>

  Read the article

• Announcing Two Papers Addressing the RPAS Fusion Client

  - by Oracle Retail Documentation Team

  Oracle Retail has published two documents to My Oracle Support addressing the Retail Predictive Application Server (RPAS) Fusion Client, a web-based rich client developed using the latest Oracle Application Development Framework (ADF). The Fusion Client provides an enhanced user experience for communicating with the RPAS server. Oracle Retail Predictive Application Server Fusion Client Getting Started Guide Doc ID 1492759.1The Retail Predictive Application Server (RPAS) is a configurable platform that provides capabilities such as a multidimensional database structure, batch and online processing, a configurable user interface, a configurable calculation engine, user security, and utility functions such as importing and exporting, all on a highly scalable technical environment that can be deployed on a variety of hardware. This paper addresses typical questions that arise during setting up and deploying the Fusion Client, provides performance recommendations, and highlights the differences between the Classic Client and the Fusion Client. Oracle Retail RPAS Fusion Client Performance Issue Report Doc ID 1493747.1Performance issues can be frustrating for customers, and Oracle Retail will strive to assist you as you attempt to enhance the performance of your systems. To ensure the timeliest processing of your issue, retailers and partners are encouraged to respond as thoroughly as possible to each question in this document, which can be sent back for analysis by logging a Service Request and following typical Customer Support processes. The sections of the document solicit information about the following: Performance Issue Description Performance Issue Details System Configuration Data Application Configuration Data Performance Log Files

  Read the article

• AWS:EC2:: Could not connect FTP client?

  - by heathub

  My Server OS: Amazon Linux I am trying to set up ftp. I have: Installed vsftpd open port 20-21 open port 1024 - 1048 Basically, I followed every of these steps Start vsftpd service (the status indicate [ok]) I use filezilla for my ftp client. Here is my setting/configuration: Host: ec2-XX-XX-XXX-XX.compute-1.amazonaws.com Port: -(blank, but I have tried 20 and 21 though) Server Type: FTP - File Transder Protocol Logon Type: Normal Username: (tried root and ec2-user) Transfer mode: Tried passive and active I always has this error: Status: Waiting to retry... Status: Resolving address of ec2-XX-XX-XXX-XX.compute-1.amazonaws.com Status: Connecting to XX.XX.XXX.XX:21... Error: Connection timed out Error: Could not connect to server Have I missed any configuration/settings? EDIT After execute the /sbin/iptables -L -n Here is the result: Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination

  Read the article

• How to customize live Ubuntu CD?

  - by karthick87

  I would like to customize Ubuntu live CD by installing some additional packages. I have followed this link but it doesn't seems to work. Can anyone provide clear instructions? Thanks in advance! Customization Packages that I want to install: Thunderbird Samba SSH Changes that I need: Remove Games menu from the Application menu Firefox shortcut on desktop Radiance as the default theme Different default Ubuntu wallpaper Note I do not prefer Remastersys, manual way will be appreciated. updates I want the panel to be placed at the bottom. I want to paste my samba configuration file instead of default samba configuration. And i have few firefox shortcuts and Folders, i have to show that in Desktop. Also it will be nice if you say me how to change the icon sets. Recent Updates I have customized ubuntu 10.10 with firefox shortcuts and few folders on desktops. Everything went smooth. But the installer gets crashes after choosing the timezone. How do i fix this issue? Also setting wallpaper affects the login screen. The wallpaper which i set is displayed on the login screen also. I just want the default one for the login screen.

  Read the article

• Putting Ubuntu Server on to a networked HDD

  - by SimplySimon

  Firstly, I know very little about servers and secondly the 1Tb HDD I have has network capabilities, but no software is installed on it, so when connected to the computer it is seen as a network connection, but not as a drive. Any advice on how to get started would be great. Up until now, I have been using it as a USB drive which worked well, but when this is sorted, I would like it to be connected directly to our BT HomeHub accessible through the WiFi for all the family to use as a film and back up repository. I would then be able to set up individual accounts for each family member to use and may be, if possible, make it accessible from outside locations. The First question then is: How can I install Ubuntu server on the 1Tb HDD attached directly to the computers network port but which doesn't show up in Nautilus? HDD Western Digital 1.0Tb LBA 1953525168 Model: WD10EACS-00DB0 DCM: DHRNHT2CF

  Read the article

• Transfer Win8 user settings between profiles [closed]

  - by GlennFerrieLive

  Possible Duplicate: How do I sync grouped Windows Store apps between devices? Is there a way for me to copy/save/transfer my "start menu" configuration, meaning the grouping and ordering of the elements on the Start screen, between user profiles? Is it in the registry? I am open to manual or "coded" suggestions. UPDATE: I'd like to VETO this closing. I am aware of the "roaming" profile behavior. I want to COPY my configuration BETWEEN profiles on the same machine.... DIFFERENT profile DIFFERENT person. I like the way my start screen is set up. i want to set my wife up with the same layout.

  Read the article

• How can I join two simple home networks together using an ethernet cable?

  - by Ilia Jerebtsov

  I want to join two different home networks together like so: PC A1 PC A2 PC B1 PC B2 \ / \ / Gateway A <----- ethr. cable -----> Gateway B | | ADSL modem A ADSL modem B Both networks are of the basic residential type with identical configuration, with all PCs running Vista/7. The point is to temporarily join two apartments in a building for gaming and file sharing, and the holy grail would be: PCs on network A can access PCs on network B and vice-versa (file shares and gaming). Each network uses its own internet connection. Data between networks shouldn't take a trip through the internet (broadband upload speeds are severely capped) A network's internet access should continue working if the joining cable is disconnected with minimal configuration changes. How closely can this be achieved?

  Read the article

• Desktop goes blurry / granulated

  - by Bonfire

  After few minutes using, desktop and fonts in unity-menu goes blurry. See screenshot.! In all applications (browser etc.) graphics seem to be allright. After rebooting problem disappears for few minutes. Changing the wallpaper also makes the desktop clear (for a while) but fonts are still blurry. I have ubuntu 12.04 and windows xp dualbooted. lspci: 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) 00:02.1 Display controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) lshw -c video: *-display:0 description: VGA compatible controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:16 memory:d0100000-d017ffff ioport:30c0(size=8) memory:c0000000-cfffffff memory:d0180000-d01bffff *-display:1 UNCLAIMED description: Display controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 02 width: 32 bits clock: 33MHz capabilities: cap_list configuration: latency=0 resources: memory:40000000-4007ffff Have you got any ideas to get this solved? Thank you very much! Bonfire

  Read the article

• Can't connect to wireless network in Lubuntu

  - by mike

  I have a CISCO 802.11b WIFI Mini PCI LAN card in my IBM ThinkPad T30 laptop. Is this wireless card compatible with Lubuntu? I ran it off a Live CD and it showed the network I want to connect to – but it just won't connect. I tried installing Lubuntu and during installation it also tried to connect to the same network and still nothing. I know that the wireless network is working correctly because I can connect to it with all my other devices and it works on this very same laptop when I am running Windows.

  Read the article

• Using my System as the server- need advice

  - by Ashwin

  We are deploying my web application in my system in jboss. And I am planning to use my system as the server as well. There are no html pages or jsp pages deployed. The client requests for resources and the server provides the resources in the form of objects. We are also using databases(Postgresql-15 tables) as the database server(this will also reside in my machine). My system configuration is Windows Vista, 2.3 GHZ, 4GB Ram, 32 bit. There can be many requests coming in at the same time. So is this configuration enough? Should we go with a different Operating System like Windows Server? I have never used Windows Server OS. How will it be different from other windows operating systems? Or if you feel please some other OS will be good in this situation, please suggest.

  Read the article

• Easily manage vsftpd virtual users?

  - by Phil

  I have a vsftpd server configured with many virtual users. logins are stored in a Berkeley DB file One configuration file exists for each user to define his permissions (read-only or read-write, home directory, etc.). To do that, I use the user_config_dir parameter (set in vsftpd.conf). I am wondering if it would be possible to manage these virtual users from a simple GUI (such as web interface). I have found some tools but they are limited to generic vsftpd configuration, not virtual users management. Otherwise, PAM-MySQL seems to be a good way to manage users efficiently but only username/password and logs can be stored in database, not permissions. Finally, I've found this thread, but the solution is a bit awkward... Is there any way to easily manage the vsftpd users ?

  Read the article

• How to turn off screen (DPMS) together with locking session in KDE?

  - by gertvdijk

  First of all, I'm aware a similar question for GNOME is asked here: "Switch off laptop backlight when locking screen". Objective I would like to turn off my screen on locking the session for power saving reasons. Actual problem Locking the screen on Kubuntu (KDE) inevitably triggers the screensaver as far as I can see. There's no screensaver option other than 'Blank screen' together with its background colour set to black that comes just close to my goal. It blanks the screen, but doesn't turn off the screen. Screen's backlight will still be on and not saving any power. Current workaround A workaround via a script + shortcut key is possible, however, it's just a workaround since it doesn't trigger on all ways to lock the session. Therefore, I think it should be possible to have it done more elegantly, for example by providing this option in KDE's configuration dialog of the screensaver. The workaround I am now using is the following. A script that locks the screen and turns off the screen: #!/bin/bash qdbus org.freedesktop.ScreenSaver /ScreenSaver Lock xset dpms force standby and let it run with a shortcut key via a custom menu entry. It works. Here's why I consider it to be a workaround rather than a solution. It doesn't work for other ways to trigger the locking of the session. My actual question(s) Do I need to touching/patching KDE's source? If not what are my options? If so, could someone point me to where I can get started? what do you think is the recommended place in the GUI for configuration? I'm using Kubuntu 12.04 and willing to upgrade to KDE 4.9 or waiting for the 12.10 release.

  Read the article

• Server monitoring for medium scale UNIX network

  - by nbartolomeo

  I'm looking for suggestions for a good monitoring tools, or tools, to handle a mixed Linux (RedHat 4-5) and HPUX environment. Currently we are using Hobbit which is working reasonably well but it is becoming harder to keep track of what alerts are sent out for what servers. Features I'd like to see: Easy configuration of servers. The ability to monitor CPU, network, memory, and specific processes I've looked into Nagios but from what I have seen it won't be easy to set up the configuration for all of our servers ~200 and that without installing a plugin into each agent I won't be able to monitor processes.

  Read the article

• How-To: Run CMSDK against a RAC cluster

  - by frank.closheim

  Using CMSDK in a production environment often requires a robust, reliable and failover enabled repository. When using Oracle Real Application Cluster (RAC) with your CMSDK repository you need to have a specific configuration in place to support such a setup. This post will explain the configuration steps required when running CMSDK 9.0.4.6 with Oracle WebLogic Server (WLS).In the previous CMSDK 9.0.4.2 version a RAC enabled connect string looked like this: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = rac1)(PORT = 1521))(ADDRESS = (PROTOCOL = TCP)(HOST = rac2)(PORT = 1521))(LOAD_BALANCE = NO)(FAILOVER = ON)(CONNECT_DATA =(SERVICE_NAME = rac)(failover_mode = (type=select)(method=basic)))CMSDK 9.0.4.6 makes use of data sources to connect to the underlying database. These data sources are configured inside your Application Server, such as Oracle WebLogic Server.In Oracle WebLogic Server 10.3.4, a single data source implementation has been introduced to support an RAC cluster. It responds to Fast Application Notification (FAN) events to provide Fast Connection Failover (FCF), Runtime Connection Load-Balancing (RCLB), and RAC instance graceful shutdown. XA affinity is supported at the global transaction Id level. The new feature is called WebLogic Active GridLink for RAC; which is implemented as the GridLink data source within WebLogic Server.This GridLink data source also works with Oracle Single Client Access Name (SCAN). SCAN is a feature used in RAC environments that provides a single name for clients to access any Oracle Database running in a cluster. You can think of SCAN as a cluster alias for databases in the cluster. The benefit is that the client’s connect information does not need to change if you add or remove nodes or databases in the cluster.The CMSDK 9.0.4.6 documentation describes how to create a regular JDBC data source named jdbc/OracleDS. Please refer to the following document which describes in detail how to create a GridLink data source in WLS.

  Read the article

• How to enable systemd instantiated service with puppet?

  - by Richard Pena

  I've got the following puppet service: service { "[email protected]": provider => systemd, ensure => running, enable => true, } When I try to apply this configuration on my client, it throws the following error: err: /Stage[main]//Node[puppetclient]/Service[[email protected]]/enable: change from false to true failed: Could not enable [email protected]: The service is running fine and I can make sure it's started on system boot by adding a symlink to getty.target.wants: ln -s /lib/systemd/system/[email protected] /etc/systemd/system/getty.target.wants/[email protected] Of source, I could go ahead and remove "enable = true" from the service definition and include a the symlink manually in the puppet configuration, but shouldn't puppet take care of this? Am I doing something terribly wrong?

  Read the article

• Load old kernel module while keeping current

  - by legion

  So I was wondering if there is anyway that I would be able to load an old iwlwifi from a 2.6 kernel while still using the 3.2 kernel and if there was a guide to doing so? I need to be able to do so because my wireless card is.... well the new kernels have broken all support for my card, which is a Intel Ultimate-N 6300. I'm extremely upset with how badly they broke support for this card to the point where I can't connect to any router that isn't wifi N enabled and even then only a select few routers work, it amazes me as to how awful it is and whats more amazing is how well it worked in 2.6 kernels. I've tried all the work arounds that have been discussed to try and fix this, and the only thing I have found that works is running a 2.6 kernel. However I would like to be able to keep my 3.2 kernel and just load up an old version of iwlwifi that actually supports it, is there anyway to do this?

  Read the article

• EDQ Technical Enablement for OPN (Prague - June 17-19)

  - by milomir.vojvodic

  Oracle Enterprise Data Quality (EDQ) Technical Enablement and Partner Training Trusted Data for Your Enterprise Applications Oracle Enterprise Data Quality helps organizations achieve maximum value from their business-critical applications by delivering fit-for-purpose data. These products also enable individuals and collaborative teams to quickly and easily identify and resolve any problems in underlying data. With Oracle Enterprise Data Quality, customers can identify new opportunities, improve operational efficiency, and more efficiently comply with industry or governmental regulation. Oracle Enterprise Data Quality is designed to serve as a very channel friendly platform to OPN.  This means that pre-built extensions, components and even complete business solutions can readily be built and shared.  This allows our customers/partners to be highly efficient in how they deploy custom business solutions, but also allows our partners to develop specialized components, domain knowledge and even complete business solutions. Training is suitable for: · Database administrators · Architects · Technical staff Objectives of the training: After completing this course, participants should: · Have an understanding of the core functionality of EDQ across profiling, auditing, transforming, parsing and matching data · Be able to describe some of the key capabilities and benefits delivered by EDQ · Be able to create and run standalone EDQ processes and jobs · Be ready to start working with data from customers and (with practice) be able to demonstrate EDQ to customers Agenda 17th June Fundamentals For Demoing (Profile, Audit, Transform and More) Profiling Auditing Transforming Writing and exporting data Jobs and scheduling Publishing, packaging and copying EDQ processes Introduction to the Customer Data Extension Pack Realtime Processing via Web Services The Server Console Run Profiles Data Interfaces Sampling Publishing metrics to the Dashboard Users and security 18th June Matching Matching overview Basic matching configuration Matching rule hierarchies Clustering Merging Reviewing possible matches Outputting Match Data Case study 19th June Address Verification Address Verification Overview Configuration Accuracy Flags Parsing Parsing Overview Phrase profiling Tailoring a CDEP Parser Base Tokenization Classification Reclassification Selection Resolution Register Here Don’t miss this FREE event. Space is limited. Oracle University V Parku 2294/4 148 00 Praha 4 17.6. – 19.6. 2014 09:00 a.m.– 17:30 p.m.

  Read the article

• Dual displays not working with Xinerama in Ubuntu 12.04

  - by user68489

  I just upgraded from Ubuntu 10.10 to 12.04. I had been using a display configuration just like the one described at http://bitkickers.blogspot.com/2009/08/rotate-just-one-monitor-with.html without any problems under 10.10. I have an nvidia Quadro FX 380 and have upgraded to the latest drivers (295.49). Everything appears to be fine when the system first boots up. However, after logging in, the left screen goes black, and the right screen displays what should be displayed on the left screen. Logging into Ubuntu 2D somewhat improves things. The left screen correctly displays the left portion of the desktop but the right screen contains a duplicate view of the left screen. Turning off Xinerama and enabling TwinView appears to fix the issues but does not allow the right monitor to be rotated. Since the display problems start to occur only after logging on, I thought it might have to do with carryover user configuration from 10.10 but the problems persist even when logging in as a guest. Clicking on System Settings - Displays results in the error message "Could not get screen information - RANDR extension is not present." Any help would be greatly appreciated.

  Read the article

• Working with Active Directory and Windows Small Business Server 2008

  - by AreYouSerious

  I have to say that in most of my time as a network engineer I have had the opportunity to play with servers, but mostly it's been to put our management software on, and that was about it. I have been a Systems Network Engineer for about three months now, and as such I have been respnosible for the configuration of our test devices... this being said, I have had to start working through how to configure and apply such things as GPO through a new forest, domain and OU. This being said I have configured about three different GPO's and applied them to different locations. The first laptop that I brought into the domain took the default Domain group Policy... this was cool, I got excited... then When I tried to bring in the second Laptop, it didn't take the policy. I looked at the configuration, and the default domain policy was applied to domain computers, however since the laptop resides in the SBS Computers of the OU that was created, SBS created individual policies for XP and Vista for that OU, which I was unaware of. So the default policy for that ou overrode the domain policy and none of the options that were defined in the Domain policy were applied... this being said, I am now working on putting the default Domain as an applicable policy in the OU, thus I won't have to reconfigure another policy to mirror the Domain Policy... here goes nothing!!!.... More to follow Later.

  Read the article

• Allowing users in from an IP address without certificate client authentication

  - by John

  I need to allow access to my site without SSL certificates from my office network and with SSL certificates outside. Here is my configuration: <Directory /srv/www> AllowOverride All Order deny,allow Deny from all # office network static IP Allow from xxx.xxx.xxx.xxx SSLVerifyClient require SSLOptions +FakeBasicAuth AuthName "My secure area" AuthType Basic AuthUserFile /etc/httpd/ssl/index Require valid-user Satisfy Any </Directory> When I'm inside network and have certificate - I can access. When I'm inside network and haven't certificate - I can't access, it requires certificate. When I'm outside network and have certificate - I can't access, it shows me basic login screen When I'm outside network and haven't certificate - I can't access, it shows me basic login screen and following configuration works perfectly <Directory /srv/www> AllowOverride All Order deny,allow Deny from all Allow from xxx.xxx.xxx.xxx AuthUserFile /srv/www/htpasswd AuthName "Restricted Access" AuthType Basic Require valid-user Satisfy Any </Directory>

  Read the article

< Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >