Search Results

Search found 30087 results on 1204 pages for 'default package'.

Page 224/1204 | < Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >

• Lost connectivity after configuring multiple network adapters on separate networks

  - by Dave Long

  I am trying to setup an Ubuntu hosting server, currently just for development, and the server has two NICs, each sitting on a different network. eth0 is on 192.168.200.* and eth1 is on 192.168.101.* and each one has a static IP. eth0 is the public facing NIC card and eth1 is strictly for internal access to the server. I initially only setup eth0 and added the eth1 card when I needed it. eth0 was working find until I added eth1, now, can't get any connectivity on eth0 unless I pull eth1 out of the box. The configuration on each system is as follows: auto eth0 iface eth0 inet static address 192.168.200.94 netmask 255.255.255.0 network 192.168.200.0 broadcast 192.168.200.255 gateway 192.168.200.253 auto eth1 iface eth1 inet static address 192.168.101.64 netmask 255.255.255.0 network 192.168.101.0 broadcast 192.168.101.255 gateway 192.168.101.254 Again eth0 worked fine until I added eth1. I have seen this happen with Windows servers if you have a Default Gateway setup for both NICs, but I am not sure if this works the same on Ubuntu. My resolv.conf file looks like so: nameserver 192.168.101.59 nameserver 192.168.101.58 domain domain.local search domain.local Per request here is the Routing table 192.168.101.0 * 255.255.255.0 U 0 0 0 eth1 192.168.200.0 * 255.255.255.0 U 0 0 0 eth0 default 192.168.101.254 0.0.0.0 UG 100 0 0 eth1 default 192.168.200.253 0.0.0.0 UG 100 0 0 eth0

  Read the article

• ubuntu linux updates don't update to latest version, why?

  - by djahma

  I'm using ubuntu and any now and then new updates are offered for installation. However I've noticed these updates don't necessarily offer the latest update for any one package, but why? For example, today, under ubuntu 11.04 I'm beeing offered to update the linux kernel from version 2.6.38.12 to 2.6.38.13, but on my secondary computer running xubuntu 11.10 the kernel version is already 3.0!? Other examples are the nautilus package which remains at version 2.32 in ubuntu 11.04 and which is already at version 3.2.1 on xubuntu 11.10, or mono JIT compiler sticking to 2.6.7 in 11.04 but already at 2.10.5 in 11.10. So, does anyone has a clue as to why these updates are updating my system to old versions?

  Read the article

• Ubuntu Software Center and Update Manager fail to open

  - by Giancarlo Palmiotti

  After attempting to install Google Chrome i386 the installation failed. I then proceeded to the AMD64 to see if it was the problem but...... My computer froze and I forced shut down. Now apport has a message saying An Error occurred please run Package Manager to fix the problem E:the package google-chrome-stable needs to be reinstalled but but i cant find an archive on it) This usually means your packages have unmet dependencies. Solution anyone PS:Update manager does not work and I don't have Snyaptic. The file itself failed at the real real end and froze everything but the cursor.

  Read the article

• Wordpress serving PHP but not CSS or JS

  - by Jason

  I'm trying to set up an Amazon EC2 instance to run a Django app and a WP instance side by side, differing only by the incoming URL. Initially, accessing the site via mysite.com/wordpress worked, but I also needed to catch the incoming requests from a subdomain address blog.mysite.com. To do that, I created a default file in /etc/apache2/sites-enabled and included two virtualhost directives, one of which was <VirtualHost *:80> ServerName www.blog.mysite.com <Directory /var/www/wordpress> Order deny,allow Allow from all </Directory> </VirtualHost> This created some errors with the other virtualhost, so I restored the default 000-default file configuration and restarted. Now, accessing mysite.com/wordpress takes forever, and even then the CSS and JS files are not loading. Iside the Firebug Net tab, I can see the HTML response, but the CSS and JS files are not loading at all. What happened here?

  Read the article

• How do I change the Admin password on a Ubee DVW3201B?

  - by Iszi

  I must admit that I feel rather foolish having to ask this. I recently switched ISPs, and the new one gave us a Ubee DVW3201B as our home gateway. I want to change the Administrator username/password from the defaults, but I've been having some difficulty. Every time, after I save the new username and password, I'm prompted to re-authenticate to the administration interface. It fails no matter what I try. I've tried using: New username / New password Default username / New password Default username / Default password None of the above works. This has happened twice now, with my only recourse after failure being to do a reset to factory defaults (press and hold the hard reset button for 10 seconds). Is there something I'm missing?

  Read the article

• Nullable types and ?? operator C# [en-US]

  - by ruimachado

  Nullable types vs Non-nullable types   While developing our C# projects its frequent the null comparison operation to avoid null exceptions. This simple operation is mainly coded using the "var x = null" code example inside an if clause. However not all types of variables are nullable, which means that setting a variable to null is not allowed in every cases, it depends on what kind of type are you defining. But what if there was an extension to your non-nullable type that would convert your variable types to nullable? This extension really exists. As I said before in C# you have nullable types which represent all the values of an underlying type, and an additional null value and can be declared easily using "T?", where T is the type of the variable and for example the normal int type cannot be null, so its a non-nullable type, however if you define a "int?" your variable can be null, what you do is convert a non-nullable type to a nullable type. Example: int x=null;     Not allowed     int? x=null;   Allowed     While using nullable types you can check if a variable is null the same way you do it with nullable types:     But what about setting a default value when a certain variable is null?   In this cases the c# .net framework let you set a default value when you try to assign a nullable type to a non-nullable type, using the ?? operator. If you don't use this operator you can still catch the InvalidOperationException which is throw in this cases. For example  without the ?? operator :     Using the ?? operator your code becomes cleaner and more easy to read and you get a bonus, you can set a default value for multiple variables using the ?? in a chain set.     That’s it,   Thanks, Rui Machado rpmachado.wordpress.com

  Read the article

• VM6 To Ship Updated SMB Virtualization Software

  The latest upgrade to VM6's VMex small business virtualization package aims to streamline the user interface in order to help customers reduce operating costs.

  Read the article

• Hulu desktop stopped working on my Dell

  - by jwdinkc

  After last weeks flash update Hulu desktop no longer works on my Dell laptop though it still works on my HP Desktop. Here's what CLI tells me on the Dell: Inspiron-1564:~$ huludesktop Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory I tried: sudo apt-get install libvdpau_nvidia.so but got E: Unable to locate package libvdpau_nvidia.so and E: Couldn't find any package by regex 'libvdpau_nvidia.so' Hulu does work through the browser and through XBMC. XBMC just doesn't seem to match the video quality of the Hulu Desktop. I don't really know why a nvidia.so is needed for my Intel graphics that comes on Dell Insiron 1564's. anyway. So, do you guys have a solution?

  Read the article

• How does Amazon ec2-user get its sudo rights

  - by Johan

  I am looking for where the default Amazon AMI linux image sets up the privileges for the default ec2-user account. After logging in with this account I can use sudo successfully. Checking via the sudoers file, which I open by running visudo (with no other options) I see a few default settings and permissions for root ALL ALL So ... Where is the permissions for ec2-user assigned? I have not yet tried to add a new permission but ultimately I want to resign ec2-user for systems management tasks and use a non-full root user for administering the applications (stop and start mysql, httpd, edit apache's vhost files, and upload / edit web content under the web root)

  Read the article

• Apply email retention policy to Inbox but not subfolders?

  - by NaOH

  Our official email policy states that email older than 90 days in the Inbox is moved to Deleted Items, not including subfolders of the Inbox. This wasn't a problem to implement in Exchange 2003. In 2010, however, it appears that Policy Tags applied to the Inbox also apply to its subfolders. How can I prevent this from occuring? EDIT: Here is the output of Get-RetentionPolicy: RunspaceId : b6a05d43-3e56-4348-9d0e-2d2bf7e6c283 RetentionId : 56417b54-af3b-4c14-bd3c-9dcf9bdd133e RetentionPolicyTagLinks : {Junk E-mail - 7 Days, Deleted Items - 7 Days, Sent Items - 90 Days, Inbox - 90 Days} AdminDisplayName : ExchangeVersion : 1.0 (0.0.0.0) Name : Default Company Policy DistinguishedName : CN=Default Company Policy,CN=Retention Policies Container,CN=Company,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=com Identity : Default Company Policy Guid : 56417b54-af3b-4c14-bd3c-9dcf9bdd133e ObjectCategory : domain.com/Configuration/Schema/ms-Exch-Mailbox-Recipient-Template ObjectClass : {top, msExchRecipientTemplate, msExchMailboxRecipientTemplate} WhenChanged : 2/8/2013 2:18:11 PM WhenCreated : 2/8/2013 2:11:18 PM WhenChangedUTC : 2/8/2013 10:18:11 PM WhenCreatedUTC : 2/8/2013 10:11:18 PM OrganizationId : OriginatingServer : server.domain.com IsValid : True

  Read the article

• How to structure my java packages

  - by MightyPork

  I have a Java library, quite a huge one. I'm asking regarding Best Practices of structuring the source. For example, the logging sybsystem: Option 1: All in one package, named to sort nicely Log - static accessor LogMonitor - interface for log minotor LogMonitorBase - abstract class LogMonitorStdout - print log to console LogWriter - interface for file logger LogWriterSimple - log writer with just one log file LogWriterArchiving - log writer that handles old log files Option 2: Subpackages for Monitors and Writers, with better names Log monitors/LogMonitor monitors/BaseMonitor monitors/StdoutMonitor writers/LogWriter writers/SimpleLog writers/ArchivingLog The second maybe looks better, but perhaps it's not so practical from the java point of view (two extra packages). What do you suggest as the best practice here? A lot in one package, grouped by naming prefixes, or a lot of subpackages with better names?

  Read the article

• Is it possible to use binary nvidia driver with GeForce 7300 SE?

  - by jrennie

  I have an Nvidia GeForce 7300 SE. It worked fine with the nvidia driver when I was using 10.10. When I upgraded to 12.04, the (nvidia-current) binary driver failed---I couldn't even get a login screen. The "nouveau" driver works okay, but the display is quite sluggish. I've read about the fact that my GeForce is blacklisted (here and here). But, when I tried the suggested workaround of using nvidia-173, I discovered that it wouldn't install because of a failed dependency: xorg-video-abi-10 (Package not available). The "precise" nvidia-173 package page notes this (dependency bug?) So, my real question: is there a GeForce 7300 SE workaround for 12.04?

  Read the article

• Linux router with diffent gateways for incomming and outgoing connections

  - by nkout

  I have the following topology: LAN Users:192.168.1.2 - 254 (192.168.1.0/24) gateway1: 192.168.2.2/24 used for all outgoing connections of LAN users (default gateway) gateway2: 192.168.3.2/24 used for incoming services (destination NAT, ports 80,443 are forwarded to 192.168.2.1) linux router-server R eth0 192.168.1.1/24: LAN eth1 192.168.2.1/24: WWAN1 eth2 192.168.3.1/24: WWAN2 I want to: route all outgoing traffic coming from LAN and R via 192.168.2.2 route the responses to incoming connections via 192.168.3.2 My config: ifconfig eth0 up 192.168.1.1 netmask 255.255.255.0 ifconfig eth1 up 192.168.2.1 netmask 255.255.255.0 ifconfig eth2 up 192.168.3.1 netmask 255.255.255.0 echo 0 >/proc/sys/net/ipv4/ip_forward route add default gw 192.168.2.2 iptables -t nat -A POSTROUTING -d !192.168.0.0/16 -j MASQUERADE I want to add iptables rule to mark incoming traffic from WWAN2 and send back the responses to WWAN2, while keeping default gateway on WWAN1

  Read the article

• How to failover to local account on a cisco switch/router if radius server fails?

  - by 3d1l

  I have the following configuration on a switch that I testing for RADIUS authentication: aaa new-model aaa authenticaton login default group radius local aaa authentication enable default group radius enable aaa authorization exec default group radius local enable secret 5 XXXXXXXXX ! username admin secret 5 XXXXXXXXX ! ip radius source-interface FastEthernet0/1 radius-server host XXX.XXX.XXX.XXX auth-port 1812 acct-port 1813 key XXXXXXXXX radius-server retransmit 3 ! line con 0 line vty 5 15 Radius authentication is working just fine but if the server is not available I can not log into the router with the ADMIN account. What's wrong there? Thanks!

  Read the article

• Changed folder icon in WinXP and now clicking a folder opens in a new window.

  - by widgisoft

  I got bored and decided to change my folder icon from the boring yellow default. Somewhere in my experiments, I discovered that anytime I open a folder it opens in a "search" window. This happened because when I go to the "(file folder)" type, the only option in there is "find" that is not supposed to be the default; upon saving this form XP tries to do me a favour and sets this as the new default. Now whenever I try to click a folder it opens the search window. How do I fix this?

  Read the article

• Dynamic quicklist: how to reference to .desktop file? (installed in /opt)

  - by Nick Lemaire

  I'm trying to create a dynamic quicklist for an application I'm developing in quickly. This is the line of code I use to try and connect to the .desktop file: self.launcher = Unity.LauncherEntry.get_for_desktop_id("my-app.desktop") For testing purposes, I've found that when using quickly run I should copy the .desktop file to ~/.local/share/applications. When I do this, the quicklist shows up correctly. However, when packaging my app using quickly package --extras, and installing this package, I get a launcher without quicklist. Does this have something to do with my app being installed in /opt? Meaning my desktop file is located somewhere else? Should I use another reference to the desktop file?

  Read the article

• pc dont work at full speed

  - by kubilas

  motherboard gigabyte GA-8I915PL-G, pentium 4 630 3,0 ghz dont run at default speed ; fsb 800, cpu host 200, cpu 3000 mhz but run some time at fsb 533 cpu host 133 cpu 2025 mhz some time at fsb 75 and cpu 1128 mhz only. when i set in easy tune default parametrs pc dont work. some time i clear cmos and i can set in bios default parametrs, some time clearing cmos dont help, bios i update. how i can fix this problem? sorry about my bad english.

  Read the article

• maxItemsInObjectGraph limit required to be changed for server and client

  - by Michael Freidgeim

  We have a wcf service, that expects to return a huge XML data. It worked ok in testing, but in production it failed with error  "Maximum number of items that can be serialized or deserialized in an object graph is '65536'. Change the object graph or increase the MaxItemsInObjectGraph quota."The MSDN article about   dataContractSerializer xml configuration  element  correctly  describes maxItemsInObjectGraph attribute default as 65536, but documentation for of the DataContractSerializer.MaxItemsInObjectGraph property and DataContractJsonSerializer.MaxItemsInObjectGraph Property are talking about Int32.MaxValue, which causes confusion, in particular because Google shows properties articles before configuration articles.When we changed the value in WCF service configuration, it didn't help, because the similar change must be ALSO done on client.There are similar posts:http://stackoverflow.com/questions/6298209/how-to-fix-maxitemsinobjectgraph-error/6298356#6298356You need to set the MaxItemsInObjectGraph on the dataContractSerializer using a behavior on both the client and service. See  for an example.http://devlicio.us/blogs/derik_whittaker/archive/2010/05/04/setting-maxitemsinobjectgraph-for-wcf-there-has-to-be-a-better-way.aspxhttp://stackoverflow.com/questions/2325321/maxitemsinobjectgraph-ignored/4455209#4455209 I had forgot to place this setting in my client app.config file.http://stackoverflow.com/questions/9191167/maximum-number-of-items-that-can-be-serialized-or-deserialized-in-an-object-graphttp://stackoverflow.com/questions/5867304/datacontractjsonserializer-and-maxitemsinobjectgraph?rq=1 -It seems that DataContractJsonSerializer.MaxItemsInObjectGraph has actual default 65536, because there is no configuration for JSON serializer, but  it complains about the limit.I believe that MS should clarify the properties documentation re default limit and make more specific error messages to distinguish server side and client side errors.Note, that as a workaround it's possible to use commonBehaviors section which can be defined only in machine.config:<commonBehaviors> <behaviors> <endpointBehaviors> <dataContractSerializer maxItemsInObjectGraph="..." /> </endpointBehaviors> </behaviors></commonBehaviors>v

  Read the article

• Windows 7 Boot Loader - Remove 30 second waiting time

  - by derekhh

  I've installed Fedora 17 and Windows 7 on two different hard disks as a dual-boot system. The default boot loader is GRUB 2 maintained and configured in Fedora 17. When I startup and choose "Windows 7 bootloader (on /dev/sda1)" in GRUB 2, Windows 7 boot loader will appear, with only Windows 7 as the only choice and also the default operating system, with a 30 second waiting time if no input is detected. I'm trying to see if it is possible to remove this 30-second waiting time. I've tried to follow the instructions on the Web by configuring default operating system in the control panel but seems there is something wrong with it. I've also tried to use "bcdedit enum /all" but still receives error prompts. Update: Added my boot tab screen in msconfig.

  Read the article

• SharePoint Session Management - which SQL Server option?

  - by frumious

  We're developing some custom web parts for our WSS 3 intranet, and have just run into something we'd like to use ASP.NET sessions for. This isn't currently enabled on the development server. We'd like to use SQL Server as the storage mechanism, because the production environment is a web farm with very simple load-balancing. There are 3 options you can choose from to set up the SQL Server session storage, tempdb, default separate DB, named DB. Both tempdb and default separate DB create a new DB to store certain information in; tempdb stores the actual session info in tempdb, which doesn't survive a reboot, and default separate DB stores everything in the new DB. Since you've got to create the new DB either way, my question is this: why would you ever choose to store the session info in tempdb? The only thing I can think of is if you'd like to have the ability to wipe the session by rebooting the server, but that seems quite apocalyptic!

  Read the article

• Visual Studio 2010: Extension Manager

  - by Natasa Gavrilovic

  If you still didn’t explore Extension Manager under Tools in Visual Studio 2010 now it’s the time!   VS2010 can be expended to include add-ons you wish to have. The Extension Manager list is pretty extensive, where most of them are ‘still work in progress’ tools but, at least, it is worth trying.   Listed below are top ranked ones that should help to enhance your coding experience:   ·         Productivity Power Tools – set of small gadgets: Auto Brace Completion, Quick Access, Column Guides, Align Assignments, Triple Click etc. ·         PowerCommands  ·         Visual Studio Web Standards Update –newly released update for support HTML5 and CSS3 ·         MVC Scaffolding - scaffold elements from entities ·         NuGet Package Manager – automated package manager tool   Online the Extension manager is locaated ats Visual Studio Gallery.   Another good place is CodePlex. It is open source software website focusing on .NET that contains more than 20 000 add-ons tagged in more than 20 different categories.   Feel free to add a comment how your VS is ‘customized’ and what will be your recommendation.   N.

  Read the article

• Changing Wallpaper on 12.04 Login Screen

  - by userIsAMonkey

  I'm using this link but seems to be not working on 12.04, here's the Terminal message below: Are there other softwares/tips for changing the login screen? I'm also using link but seems outdated. Failed to fetch http://ppa.launchpad.net/claudiocn/slm/ubuntu/dists/precise/main/source/Sources 404 Not Found W: Failed to fetch http://ppa.launchpad.net/claudiocn/slm/ubuntu/dists/precise/main/binary-amd64/Packages 404 Not Found W: Failed to fetch http://ppa.launchpad.net/claudiocn/slm/ubuntu/dists/precise/main/binary-i386/Packages 404 Not Found E: Some index files failed to download. They have been ignored, or old ones used instead. law@ubuntu:~$ sudo apt-get install simple-lightdm-manager Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package simple-lightdm-manager

  Read the article

• Installing ImageMagick for C(++) on Ubuntu 12.10

  - by user167747

  I'm having a hard time installing the ImageMagick software for Ubuntu 12.10. So, I want the C and C++ API, not much more. Now when I go to imagemagick.org, they have a binary package for unix, namely an rpm. When I download and launch it, RPM complains that firstly I should be using alien, and secondly there are like 10000 missing dependencies. If I use alien to create a deb file, and the install it via the software center, the package does indeed install, but only the command line interface - no includes, anything. Same with apt-get imagemagick. (BTW - wtf, they don't have support for ubuntu?) I tried compiling from source (which I shoudn't be doing anyway - I'm not expecting much customization am I?), and then the includes are present, but the programs won't compile complaining about "undefined reference" and then a list of everything that isn't pure C (and I'm using the command imagemagick.org told me to use, namely cc -o wand pkg-config --cflags --libs MagickWand wand.c) so clearly I'm doing something wrong. Any help would be much appreciated.

  Read the article

• Reduced Tree View in NetBeans IDE 7.2

  - by Geertjan

  Right-click within the Projects window in NetBeans IDE 7.2 and from the "View Java Packages As" menu, you can now choose "Reduced Tree".I never really understood the difference between "Reduced Tree" and the already existing "Tree". But it makes sense when you see it. Here's Reduced Tree view: And here's Tree view, where you can see that the "actions" and "nodes" packages above each have their own top level package nodes, which takes up more space than the above: What's cool is that your selected package view is persisted across restarts of the IDE. To be complete, here's the List view, which is the third option you have in the "View Java Packages As" menu: Seems to me like the new Reduced Tree view combines the best of the Tree view with the best of the List view! Related issue: http://netbeans.org/bugzilla/show_bug.cgi?id=53192

  Read the article

• reinstalling totem 3.0.1 from source

  - by user1537727

  I have totem 3.0.1 installed on my system, but I wish to install from source the same and when I do so i am presented with the following dependency errors. How can this be possible? configure: error: Package requirements ( glib-2.0 >= 2.27.92 gio-2.0 >= 2.27.92 gtk+-3.0 >= 2.99.3 gdk-x11-3.0 >= 2.99.3 gmodule-2.0 totem-plparser >= 2.32.4 gstreamer-tag-0.10 >= 0.10.26 cairo) were not met: No package 'totem-plparser' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables DEPENDENCY_CFLAGS and DEPENDENCY_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.

  Read the article

< Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >