Search Results

Search found 6103 results on 245 pages for 'logical tree'.

Page 224/245 | < Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >

  • Trigger Happy

    - by Tim Dexter
    Its been a while, I know, we’ll say no more OK? I’ll just write …In the latest BIP 11.1.1.6 release and if I’m really honest; the release before this (we'll call it dot 5 for brevity.) The boys and gals in the engine room have been real busy enhancing BIP with some new functionality. Those of you that use the scheduling engine in OBIEE may already know and use the ‘conditional scheduling’ feature. This allows you to be more intelligent about what reports get run and sent to folks on a scheduled basis. You create a ‘trigger’ analysis (answer) that is executed at schedule time prior to the main report. When the schedule rolls around, the trigger is run, if it returns rows, then the main report is run and delivered. If there are no rows returned, then the main report is not run. Useful right? Your users are not bombarded with 20 reports in their inbox every week that they need to wade throu. They get a handful that they know they need to look at. If you ensure you use conditional formatting in the report then they can find the anomalous data in the reports very quickly and move on to the rest of their day more quickly. You could even think of OBIEE as a virtual team member, scouring the data on your behalf 24/7 and letting you know when its found an issue.BI Publisher, wanting the team t-shirt and the khaki pants, has followed suit. You can now set up ‘triggers’ for it to execute before it runs the main report. Just like its big brother, if the scheduled report trigger returns rows of data; it then executes the main report. Otherwise, the report is skipped until the next schedule time rolls around. Sound familiar?BIP differs a little, in that you only need to construct a query to act as the trigger rather than a complete report. Let assume we have a monthly wage by department report on a schedule. We only want to send the report to managers if their departmental wages reach and/or exceed a certain amount. The toughest part about this is coming up with the SQL to test the business rule you want to implement. For my example, its not that tough: select d.department_name, sum(e.salary) as wage_total from employees e, departments d where d.department_id = e.department_id group by d.department_name having sum(e.salary) > 230000 We're looking for departments where the wage cost is greater than 230,000 Dexter Dollars! With a bit of messing I found out you can parametrize the query. Users can then set a value at schedule time if they need to. To create the trigger is straightforward enough. You can create multiple triggers for users to select at schedule time. Notice I also used a parameter in the query, :wamount. Note the matching parameter in the tree on the left. You also dont need to return multiple columns, one is fine, the key is if there are rows returned. You can build the rest of your report as usual. At scheduling time the Schedule tab has a bit more on it. If your users want to set the trigger, they check the Use Trigger box. The page will then pop fields to pick the appropriate trigger they want to use, even a trigger on another data model if needed. Note it will also ask for the parameter value associated with the trigger. At this point you should note that the data model does not make a distinction between trigger and data model (extract) parameters. So users will see the parameters on the General and Schedule tabs. If per chance you do need to just have a trigger parameters. You can just hide them from the report using the Parameters popup in the report designer, just un-check the 'Show' box I have tested the opposite case where you do not want main report parameters seen in the trigger section. BIP handles that for you! Once the report hits its allotted schedule time, the trigger is executed. Based on the results the report will either run or be 'skipped.' Now, you have a smarter scheduler that will only deliver reports when folks need to see them and take action on the contents. More official info here for developers and here for users.

    Read the article

  • Waterfall Model (SDLC) vs. Prototyping Model

    The characters in the fable of the Tortoise and the Hare can easily be used to demonstrate the similarities and differences between the Waterfall and Prototyping software development models. This children fable is about a race between a consistently slow moving but steadfast turtle and an extremely fast but unreliable rabbit. After closely comparing each character’s attributes in correlation with both software development models, a trend seems to appear in that the Waterfall closely resembles the Tortoise in that Waterfall Model is typically a slow moving process that is broken up in to multiple sequential steps that must be executed in a standard linear pattern. The Tortoise can be quoted several times in the story saying “Slow and steady wins the race.” This is the perfect mantra for the Waterfall Model in that this model is seen as a cumbersome and slow moving. Waterfall Model Phases Requirement Analysis & Definition This phase focuses on defining requirements for a project that is to be developed and determining if the project is even feasible. Requirements are collected by analyzing existing systems and functionality in correlation with the needs of the business and the desires of the end users. The desired output for this phase is a list of specific requirements from the business that are to be designed and implemented in the subsequent steps. In addition this phase is used to determine if any value will be gained by completing the project. System Design This phase focuses primarily on the actual architectural design of a system, and how it will interact within itself and with other existing applications. Projects at this level should be viewed at a high level so that actual implementation details are decided in the implementation phase. However major environmental decision like hardware and platform decision are typically decided in this phase. Furthermore the basic goal of this phase is to design an application at the system level in those classes, interfaces, and interactions are defined. Additionally decisions about scalability, distribution and reliability should also be considered for all decisions. The desired output for this phase is a functional  design document that states all of the architectural decisions that have been made in regards to the project as well as a diagrams like a sequence and class diagrams. Software Design This phase focuses primarily on the refining of the decisions found in the functional design document. Classes and interfaces are further broken down in to logical modules based on the interfaces and interactions previously indicated. The output of this phase is a formal design document. Implementation / Coding This phase focuses primarily on implementing the previously defined modules in to units of code. These units are developed independently are intergraded as the system is put together as part of a whole system. Software Integration & Verification This phase primarily focuses on testing each of the units of code developed as well as testing the system as a whole. There are basic types of testing at this phase and they include: Unit Test and Integration Test. Unit Test are built to test the functionality of a code unit to ensure that it preforms its desired task. Integration testing test the system as a whole because it focuses on results of combining specific units of code and validating it against expected results. The output of this phase is a test plan that includes test with expected results and actual results. System Verification This phase primarily focuses on testing the system as a whole in regards to the list of project requirements and desired operating environment. Operation & Maintenance his phase primarily focuses on handing off the competed project over to the customer so that they can verify that all of their requirements have been met based on their original requirements. This phase will also validate the correctness of their requirements and if any changed need to be made. In addition, any problems not resolved in the previous phase will be handled in this section. The Waterfall Model’s linear and sequential methodology does offer a project certain advantages and disadvantages. Advantages of the Waterfall Model Simplistic to implement and execute for projects and/or company wide Limited demand on resources Large emphasis on documentation Disadvantages of the Waterfall Model Completed phases cannot be revisited regardless if issues arise within a project Accurate requirement are never gather prior to the completion of the requirement phase due to the lack of clarification in regards to client’s desires. Small changes or errors that arise in applications may cause additional problems The client cannot change any requirements once the requirements phase has been completed leaving them no options for changes as they see their requirements changes as the customers desires change. Excess documentation Phases are cumbersome and slow moving Learn more about the Major Process in the Sofware Development Life Cycle and Waterfall Model. Conversely, the Hare shares similar traits with the prototyping software development model in that ideas are rapidly converted to basic working examples and subsequent changes are made to quickly align the project with customers desires as they are formulated and as software strays from the customers vision. The basic concept of prototyping is to eliminate the use of well-defined project requirements. Projects are allowed to grow as the customer needs and request grow. Projects are initially designed according to basic requirements and are refined as requirement become more refined. This process allows customer to feel their way around the application to ensure that they are developing exactly what they want in the application This model also works well for determining the feasibility of certain approaches in regards to an application. Prototypes allow for quickly developing examples of implementing specific functionality based on certain techniques. Advantages of Prototyping Active participation from users and customers Allows customers to change their mind in specifying requirements Customers get a better understanding of the system as it is developed Earlier bug/error detection Promotes communication with customers Prototype could be used as final production Reduced time needed to develop applications compared to the Waterfall method Disadvantages of Prototyping Promotes constantly redefining project requirements that cause major system rewrites Potential for increased complexity of a system as scope of the system expands Customer could believe the prototype as the working version. Implementation compromises could increase the complexity when applying updates and or application fixes When companies trying to decide between the Waterfall model and Prototype model they need to evaluate the benefits and disadvantages for both models. Typically smaller companies or projects that have major time constraints typically head for more of a Prototype model approach because it can reduce the time needed to complete the project because there is more of a focus on building a project and less on defining requirements and scope prior to the start of a project. On the other hand, Companies with well-defined requirements and time allowed to generate proper documentation should steer towards more of a waterfall model because they are in a position to obtain clarified requirements and have to design and optimal solution prior to the start of coding on a project.

    Read the article

  • SQL University: What and why of database testing

    - by Mladen Prajdic
    This is a post for a great idea called SQL University started by Jorge Segarra also famously known as SqlChicken on Twitter. It’s a collection of blog posts on different database related topics contributed by several smart people all over the world. So this week is mine and we’ll be talking about database testing and refactoring. In 3 posts we’ll cover: SQLU part 1 - What and why of database testing SQLU part 2 - What and why of database refactoring SQLU part 2 – Tools of the trade With that out of the way let us sharpen our pencils and get going. Why test a database The sad state of the industry today is that there is very little emphasis on testing in general. Test driven development is still a small niche of the programming world while refactoring is even smaller. The cause of this is the inability of developers to convince themselves and their managers that writing tests is beneficial. At the moment they are mostly viewed as waste of time. This is because the average person (let’s not fool ourselves, we’re all average) is unable to think about lower future costs in relation to little more current work. It’s orders of magnitude easier to know about the current costs in relation to current amount of work. That’s why programmers convince themselves testing is a waste of time. However we have to ask ourselves what tests are really about? Maybe finding bugs? No, not really. If we introduce bugs, we’re likely to write test around those bugs too. But yes we can find some bugs with tests. The main point of tests is to have reproducible repeatability in our systems. By having a code base largely covered by tests we can know with better certainty what a small code change can break in other parts of the system. By having repeatability we can make code changes with confidence, since we know we’ll see what breaks in other tests. And here comes the inability to estimate future costs. By spending just a few more hours writing those tests we’d know instantly what broke where. Imagine we fix a reported bug. We check-in the code, deploy it and the users are happy. Until we get a call 2 weeks later about a certain monthly process has stopped working. What we don’t know is that this process was developed by a long gone coworker and for some reason it relied on that same bug we’ve happily fixed. There’s no way we could’ve known that. We say OK and go in and fix the monthly process. But what we have no clue about is that there’s this ETL job that relied on data from that monthly process. Now that we’ve fixed the process it’s giving unexpected (yet correct since we fixed it) data to the ETL job. So we have to fix that too. But there’s this part of the app we coded that relies on data from that exact ETL job. And just like that we enter the “Loop of maintenance horror”. With the loop eventually comes blame. Here’s a nice tip for all developers and DBAs out there: If you make a mistake man up and admit to it. All of the above is valid for any kind of software development. Keeping this in mind the database is nothing other than just a part of the application. But a big part! One reason why testing a database is even more important than testing an application is that one database is usually accessed from multiple applications and processes. This makes it the central and vital part of the enterprise software infrastructure. Knowing all this can we really afford not to have tests? What to test in a database Now that we’ve decided we’ll dive into this testing thing we have to ask ourselves what needs to be tested? The short answer is: everything. The long answer is: read on! There are 2 main ways of doing tests: Black box and White box testing. Black box testing means we have no idea how the system internals are built and we only have access to it’s inputs and outputs. With it we test that the internal changes to the system haven’t caused the input/output behavior of the system to change. The most important thing to test here are the edge conditions. It’s where most programs break. Having good edge condition tests we can be more confident that the systems changes won’t break. White box testing has the full knowledge of the system internals. With it we test the internal system changes, different states of the application, etc… White and Black box tests should be complementary to each other as they are very much interconnected. Testing database routines includes testing stored procedures, views, user defined functions and anything you use to access the data with. Database routines are your input/output interface to the database system. They count as black box testing. We test then for 2 things: Data and schema. When testing schema we only care about the columns and the data types they’re returning. After all the schema is the contract to the out side systems. If it changes we usually have to change the applications accessing it. One helpful T-SQL command when doing schema tests is SET FMTONLY ON. It tells the SQL Server to return only empty results sets. This speeds up tests because it doesn’t return any data to the client. After we’ve validated the schema we have to test the returned data. There no other way to do this but to have expected data known before the tests executes and comparing that data to the database routine output. Testing Authentication and Authorization helps us validate who has access to the SQL Server box (Authentication) and who has access to certain database objects (Authorization). For desktop applications and windows authentication this works well. But the biggest problem here are web apps. They usually connect to the database as a single user. Please ensure that that user is not SA or an account with admin privileges. That is just bad. Load testing ensures us that our database can handle peak loads. One often overlooked tool for load testing is Microsoft’s OSTRESS tool. It’s part of RML utilities (x86, x64) for SQL Server and can help determine if our database server can handle loads like 100 simultaneous users each doing 10 requests per second. SQL Profiler can also help us here by looking at why certain queries are slow and what to do to fix them.   One particular problem to think about is how to begin testing existing databases. First thing we have to do is to get to know those databases. We can’t test something when we don’t know how it works. To do this we have to talk to the users of the applications accessing the database, run SQL Profiler to see what queries are being run, use existing documentation to decipher all the object relationships, etc… The way to approach this is to choose one part of the database (say a logical grouping of tables that go together) and filter our traces accordingly. Once we’ve done that we move on to the next grouping and so on until we’ve covered the whole database. Then we move on to the next one. Database Testing is a topic that we can spent many hours discussing but let this be a nice intro to the world of database testing. See you in the next post.

    Read the article

  • Problems with opening CHM Help files from Network or Internet

    - by Rick Strahl
    As a publisher of a Help Creation tool called Html Help Help Builder, I’ve seen a lot of problems with help files that won't properly display actual topic content and displays an error message for topics instead. Here’s the scenario: You go ahead and happily build your fancy, schmanzy Help File for your application and deploy it to your customer. Or alternately you've created a help file and you let your customers download them off the Internet directly or in a zip file. The customer downloads the file, opens the zip file and copies the help file contained in the zip file to disk. She then opens the help file and finds the following unfortunate result:     The help file  comes up with all topics in the tree on the left, but a Navigation to the WebPage was cancelled or Operation Aborted error in the Help Viewer's content window whenever you try to open a topic. The CHM file obviously opened since the topic list is there, but the Help Viewer refuses to display the content. Looks like a broken help file, right? But it's not - it's merely a Windows security 'feature' that tries to be overly helpful in protecting you. The reason this happens is because files downloaded off the Internet - including ZIP files and CHM files contained in those zip files - are marked as as coming from the Internet and so can potentially be malicious, so do not get browsing rights on the local machine – they can’t access local Web content, which is exactly what help topics are. If you look at the URL of a help topic you see something like this:   mk:@MSITStore:C:\wwapps\wwIPStuff\wwipstuff.chm::/indexpage.htm which points at a special Microsoft Url Moniker that in turn points the CHM file and a relative path within that HTML help file. Try pasting a URL like this into Internet Explorer and you'll see the help topic pop up in your browser (along with a warning most likely). Although the URL looks weird this still equates to a call to the local computer zone, the same as if you had navigated to a local file in IE which by default is not allowed.  Unfortunately, unlike Internet Explorer where you have the option of clicking a security toolbar, the CHM viewer simply refuses to load the page and you get an error page as shown above. How to Fix This - Unblock the Help File There's a workaround that lets you explicitly 'unblock' a CHM help file. To do this: Open Windows Explorer Find your CHM file Right click and select Properties Click the Unblock button on the General tab Here's what the dialog looks like:   Clicking the Unblock button basically, tells Windows that you approve this Help File and allows topics to be viewed.   Is this insecure? Not unless you're running a really old Version of Windows (XP pre-SP1). In recent versions of Windows Internet Explorer pops up various security dialogs or fires script errors when potentially malicious operations are accessed (like loading Active Controls), so it's relatively safe to run local content in the CHM viewer. Since most help files don't contain script or only load script that runs pure JavaScript access web resources this works fine without issues. How to avoid this Problem As an application developer there's a simple solution around this problem: Always install your Help Files with an Installer. The above security warning pop up because Windows can't validate the source of the CHM file. However, if the help file is installed as part of an installation the installation and all files associated with that installation including the help file are trusted. A fully installed Help File of an application works just fine because it is trusted by Windows. Summary It's annoying as all hell that this sort of obtrusive marking is necessary, but it's admittedly a necessary evil because of Microsoft's use of the insecure Internet Explorer engine that drives the CHM Html Engine's topic viewer. Because help files are viewing local content and script is allowed to execute in CHM files there's potential for malicious code hiding in CHM files and the above precautions are supposed to avoid any issues. © Rick Strahl, West Wind Technologies, 2005-2012 Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • ASP.NET MVC: Using ProfileRequiredAttribute to restrict access to pages

    - by DigiMortal
    If you are using AppFabric Access Control Services to authenticate users when they log in to your community site using Live ID, Google or some other popular identity provider, you need more than AuthorizeAttribute to make sure that users can access the content that is there for authenticated users only. In this posting I will show you hot to extend the AuthorizeAttribute so users must also have user profile filled. Semi-authorized users When user is authenticated through external identity provider then not all identity providers give us user name or other information we ask users when they join with our site. What all identity providers have in common is unique ID that helps you identify the user. Example. Users authenticated through Windows Live ID by AppFabric ACS have no name specified. Google’s identity provider is able to provide you with user name and e-mail address if user agrees to publish this information to you. They both give you unique ID of user when user is successfully authenticated in their service. There is logical shift between ASP.NET and my site when considering user as authorized. For ASP.NET MVC user is authorized when user has identity. For my site user is authorized when user has profile and row in my users table. Having profile means that user has unique username in my system and he or she is always identified by this username by other users. My solution is simple: I created my own action filter attribute that makes sure if user has profile to access given method and if user has no profile then browser is redirected to join page. Illustrating the problem Usually we restrict access to page using AuthorizeAttribute. Code is something like this. [Authorize] public ActionResult Details(string id) {     var profile = _userRepository.GetUserByUserName(id);     return View(profile); } If this page is only for site users and we have user profiles then all users – the ones that have profile and all the others that are just authenticated – can access the information. It is okay because all these users have successfully logged in in some service that is supported by AppFabric ACS. In my site the users with no profile are in grey spot. They are on half way to be users because they have no username and profile on my site yet. So looking at the image above again we need something that adds profile existence condition to user-only content. [ProfileRequired] public ActionResult Details(string id) {     var profile = _userRepository.GetUserByUserName(id);     return View(profile); } Now, this attribute will solve our problem as soon as we implement it. ProfileRequiredAttribute: Profiles are required to be fully authorized Here is my implementation of ProfileRequiredAttribute. It is pretty new and right now it is more like working draft but you can already play with it. public class ProfileRequiredAttribute : AuthorizeAttribute {     private readonly string _redirectUrl;       public ProfileRequiredAttribute()     {         _redirectUrl = ConfigurationManager.AppSettings["JoinUrl"];         if (string.IsNullOrWhiteSpace(_redirectUrl))             _redirectUrl = "~/";     }              public override void OnAuthorization(AuthorizationContext filterContext)     {         base.OnAuthorization(filterContext);           var httpContext = filterContext.HttpContext;         var identity = httpContext.User.Identity;           if (!identity.IsAuthenticated || identity.GetProfile() == null)             if(filterContext.Result == null)                 httpContext.Response.Redirect(_redirectUrl);          } } All methods with this attribute work as follows: if user is not authenticated then he or she is redirected to AppFabric ACS identity provider selection page, if user is authenticated but has no profile then user is by default redirected to main page of site but if you have application setting with name JoinUrl then user is redirected to this URL. First case is handled by AuthorizeAttribute and the second one is handled by custom logic in ProfileRequiredAttribute class. GetProfile() extension method To get user profile using less code in places where profiles are needed I wrote GetProfile() extension method for IIdentity interface. There are some more extension methods that read out user and identity provider identifier from claims and based on this information user profile is read from database. If you take this code with copy and paste I am sure it doesn’t work for you but you get the idea. public static User GetProfile(this IIdentity identity) {     if (identity == null)         return null;       var context = HttpContext.Current;     if (context.Items["UserProfile"] != null)         return context.Items["UserProfile"] as User;       var provider = identity.GetIdentityProvider();     var nameId = identity.GetNameIdentifier();       var rep = ObjectFactory.GetInstance<IUserRepository>();     var profile = rep.GetUserByProviderAndNameId(provider, nameId);       context.Items["UserProfile"] = profile;       return profile; } To avoid round trips to database I cache user profile to current request because the chance that profile gets changed meanwhile is very minimal. The other reason is maybe more tricky – profile objects are coming from Entity Framework context and context has also HTTP request as lifecycle. Conclusion This posting gave you some ideas how to finish user profiles stuff when you use AppFabric ACS as external authentication provider. Although there was little shift between us and ASP.NET MVC with interpretation of “authorized” we were easily able to solve the problem by extending AuthorizeAttribute to get all our requirements fulfilled. We also write extension method for IIdentity that returns as user profile based on username and caches the profile in HTTP request scope.

    Read the article

  • Elegance, thy Name is jQuery

    - by SGWellens
    So, I'm browsing though some questions over on the Stack Overflow website and I found a good jQuery question just a few minutes old. Here is a link to it. It was a tough question; I knew that by answering it, I could learn new stuff and reinforce what I already knew: Reading is good, doing is better. Maybe I could help someone in the process too. I cut and pasted the HTML from the question into my Visual Studio IDE and went back to Stack Overflow to reread the question. Dang, someone had already answered it! And it was a great answer. I never even had a chance to start analyzing the issue. Now I know what a one-legged man feels like in an ass-kicking contest. Nevertheless, since the question and answer were so interesting, I decided to dissect them and learn as much as possible. The HTML consisted of some divs separated by h3 headings.  Note the elements are laid out sequentially with no programmatic grouping: <h3 class="heading">Heading 1</h3> <div>Content</div> <div>More content</div> <div>Even more content</div><h3 class="heading">Heading 2</h3> <div>some content</div> <div>some more content</div><h3 class="heading">Heading 3</h3> <div>other content</div></form></body>  The requirement was to wrap a div around each h3 heading and the subsequent divs grouping them into sections. Why? I don't know, I suppose if you screen-scrapped some HTML from another site, you might want to reformat it before displaying it on your own. Anyways… Here is the marvelously, succinct posted answer: $('.heading').each(function(){ $(this).nextUntil('.heading').andSelf().wrapAll('<div class="section">');}); I was familiar with all the parts except for nextUntil and andSelf. But, I'll analyze the whole answer for completeness. I'll do this by rewriting the posted answer in a different style and adding a boat-load of comments: function Test(){ // $Sections is a jQuery object and it will contain three elements var $Sections = $('.heading'); // use each to iterate over each of the three elements $Sections.each(function () { // $this is a jquery object containing the current element // being iterated var $this = $(this); // nextUntil gets the following sibling elements until it reaches // an element with the CSS class 'heading' // andSelf adds in the source element (this) to the collection $this = $this.nextUntil('.heading').andSelf(); // wrap the elements with a div $this.wrapAll('<div class="section" >'); });}  The code here doesn't look nearly as concise and elegant as the original answer. However, unless you and your staff are jQuery masters, during development it really helps to work through algorithms step by step. You can step through this code in the debugger and examine the jQuery objects to make sure one step is working before proceeding on to the next. It's much easier to debug and troubleshoot when each logical coding step is a separate line of code. Note: You may think the original code runs much faster than this version. However, the time difference is trivial: Not enough to worry about: Less than 1 millisecond (tested in IE and FF). Note: You may want to jam everything into one line because it results in less traffic being sent to the client. That is true. However, most Internet servers now compress HTML and JavaScript by stripping out comments and white space (go to Bing or Google and view the source). This feature should be enabled on your server: Let the server compress your code, you don't need to do it. Free Career Advice: Creating maintainable code is Job One—Maximum Priority—The Prime Directive. If you find yourself suddenly transferred to customer support, it may be that the code you are writing is not as readable as it could be and not as readable as it should be. Moving on… I created a CSS class to enhance the results: .section{ background-color: yellow; border: 2px solid black; margin: 5px;} Here is the rendered output before:   …and after the jQuery code runs.   Pretty Cool! But, while playing with this code, the logic of nextUntil began to bother me: What happens in the last section? What stops elements from being collected since there are no more elements with the .heading class? The answer is nothing.  In this case it stopped collecting elements because it was at the end of the page.  But what if there were additional HTML elements? I added an anchor tag and another div to the HTML: <h3 class="heading">Heading 1</h3> <div>Content</div> <div>More content</div> <div>Even more content</div><h3 class="heading">Heading 2</h3> <div>some content</div> <div>some more content</div><h3 class="heading">Heading 3</h3> <div>other content</div><a>this is a link</a><div>unrelated div</div> </form></body> The code as-is will include both the anchor and the unrelated div. This isn't what we want.   My first attempt to correct this used the filter parameter of the nextUntil function: nextUntil('.heading', 'div')  This will only collect div elements. But it merely skipped the anchor tag and it still collected the unrelated div:   The problem is we need a way to tell the nextUntil function when to stop. CSS selectors to the rescue! nextUntil('.heading, a')  This tells nextUntil to stop collecting elements when it gets to an element with a .heading class OR when it gets to an anchor tag. In this case it solved the problem. FYI: The comma operator in a CSS selector allows multiple criteria.   Bingo! One final note, we could have broken the code down even more: We could have replaced the andSelf function here: $this = $this.nextUntil('.heading, a').andSelf(); With this: // get all the following siblings and then add the current item$this = $this.nextUntil('.heading, a');$this.add(this);  But in this case, the andSelf function reads real nice. In my opinion. Here's a link to a jsFiddle if you want to play with it. I hope someone finds this useful Steve Wellens CodeProject

    Read the article

  • Do you know your ADF "grace period?"

    - by Chris Muir
    What does the term "support" mean to you in context of vendors such as Oracle giving your organization support with our products? Over the last few weeks I'm taken a straw poll to discuss this very question with customers, and I've received a wide array of answers much to my surprise (which I've paraphrased): "Support means my staff can access dedicated resources to assist them solve problems" "Support means I can call Oracle at anytime to request assistance" "Support means we can expect fixes and patches to bugs in Oracle software" The last expectation is the one I'd like to focus on in this post, keep it in mind while reading this blog. From Oracle's perspective as we're in the business of support, we in fact offer numerous services which are captured on the table in the following page. As the text under the table indicates, you should consult the relevant Oracle Lifetime Support brochures to understand the length of time Oracle will support Oracle products. As I'm a product manager for ADF that sits under the FMW tree of Oracle products, let's consider ADF in particular. The FMW brochure is found here. On page 8 and 9 you'll see the current "Application Development Framework 11gR1 (11.1.1.x)" and "Application Development Framework 11gR2 (11.1.2)" releases are supported out to 2017 for Extended Support. This timeframe is pretty standard for Oracle's current released products, though as new releases roll in we should see those dates extended. On page 8 of the PDF note the comment at the end of this page that refers to the Oracle Support document 209768.1: For more-detailed information on bug fix and patch release policies, please refer to the “Error Correction Support Policy” on MyOracle Support. This policy document is important as it introduces Oracle's Error Correction Support Policy which addresses "patches and fixes". You can find it attached the previous Oracle Support document 209768.1. Broadly speaking while Oracle does provide "generalized support" up to 2017 for ADF, the Error Correction Support Policy dictates when Oracle will provide "patches and fixes" for Oracle software, and this is where the concept of the "grace period" comes in. As Oracle releases different versions of Oracle software, say 11.1.1.4.0, you are fully supported for patches and fixes for that specific version. However when we release the next version, say 11.1.1.5.0, Oracle provides at minimum of 3 months to a maximum of 1 year "grace period" where we'll continue to provide patches and fixes for the previous version. This gives you time to move from 11.1.1.4.0 to 11.1.1.5.0 without being unsupported for patches and fixes. The last paragraph does generalize as I've attempted to highlight the concept of the grace period rather than the specific dates for any version. For specific ADF and FMW versions and their respective grace periods and when they terminated you must visit Oracle Support Note 1290894.1. I'd like to include a screenshot here of the relevant table from that Oracle Support Note but as it is will be frequently updated it's better I force you to visit that note. Be careful to heed the comment in the note: According to policy, the Grace Period has passed because a newer Patch Set has been released for more than a year. Its important to note that the Lifetime Support Policy and Error Correction Support Policy documents are the single source of truth, subject to change, and will provide exceptions when required. This My Oracle Support document is providing a summary of the Grace Period dates and time lines for planning purposes. So remember to return to the policy document for all definitions, note 1290894.1 is a summary only and not guaranteed to be up to date or correct. A last point from Oracle's perspective. Why doesn't Oracle provide patches and fixes for all releases as long as they're supported? Amongst other reasons, it's a matter of practicality. Consider JDeveloper 10.1.3 released in 2005. JDeveloper 10.1.3 is still currently supported to 2017, but since that version was released there has been just under 20 newer releases of JDeveloper. Now multiply that across all Oracle's products and imagine the number of releases Oracle would have to provide fixes and patches for, and maintain environments to test them, build them, staff to write them and more, it's simple beyond the capabilities of even a large software vendor like Oracle. So the "grace period" restricts that patches and fixes window to something manageable. In conclusion does the concept of the "grace period" matter to you? If you define support as "getting assistance from Oracle" then maybe not. But if patches and fixes are important to you, then you need to understand the "grace period" and operate within the bounds of Oracle's Error Correction Support Policy. Disclaimer: this blog post was written July 2012. Oracle Support policies do change from time to time so the emphasis is on you to double check the facts presented in this blog.

    Read the article

  • Wildcards!

    - by Tim Dexter
    Yes, its been a while, Im sorry, mumble, mumble ... no excuses. Well other than its been, as my son would say 'hecka busy.' On a brighter note I see Kan has been posting some cool stuff in my absence, long may he continue! I received a question today asking about using a wildcard in a template, something like: <?if:INVOICE = 'MLP*'?> where * is the wildcard Well that particular try does not work but you can do it without building your own wildcard function. XSL, the underpinning language of the RTF templates, has some useful string functions - you can find them listed here. I used the starts-with function to achieve a simple wildcard scenario but the contains can be used in conjunction with some of the others to build something more sophisticated. Assume I have a a list of friends and the amounts of money they owe me ... Im very generous and my interest rates a pretty competitive :0) <ROWSET> <ROW> <NAME>Andy</NAME> <AMT>100</AMT> </ROW> <ROW> <NAME>Andrew</NAME> <AMT>60</AMT> </ROW> <ROW> <NAME>Aaron</NAME> <AMT>50</AMT> </ROW> <ROW> <NAME>Alice</NAME> <AMT>40</AMT> </ROW> <ROW> <NAME>Bob</NAME> <AMT>10</AMT> </ROW> <ROW> <NAME>Bill</NAME> <AMT>100</AMT> </ROW> Now, listing my friends is easy enough <for-each:ROW> <NAME> <AMT> <end for-each> but lets say I just want to see all my friends beginning with 'A'. To do that I can use an XPATH expression to filter the data and tack it on to the for-each expression. This is more efficient that using an 'if' statement just inside the for-each. <?for-each:ROW[starts-with(NAME,'A')]?> will find me all the A's. The square braces denote the start of the XPATH expression. starts-with is the function Im calling and Im passing the value I want to check i.e. NAME and the string Im looking for. Just substitute in the characters you are looking for. You can of course use the function in a if statement too. <?if:starts-with(NAME,'A')?><?attribute@incontext:color;'red'?><?end if?> Notice I removed the square braces, this will highlight text red if the name begins with an 'A' You can even use the function to do conditional calculations: <?sum (AMT[starts-with(../NAME,'A')])?> Sum only the amounts where the name begins with an 'A' Notice the square braces are back, its a function we want to apply to the AMT field. Also notice that we need to use ../NAME. The AMT and NAME elements are at the same level in the tree, so when we are at the AMT level we need the ../ to go up a level to then come back down to test the NAME value. I have built out the above functions in a sample template here. Huge prizes for the first person to come up with a 'true' wildcard solution i.e. if NAME like '*im*exter* demand cash now!

    Read the article

  • Master Data

    - by david.butler(at)oracle.com
    Let's take a deeper look at what we mean when we talk about 'Master' data. In its most general sense, master data is data that exists in more than one operational application. These are the applications that automate business processes. These applications require significant amounts of data to function correctly.  This includes data about the objects that are involved in transactions, as well as the transaction data itself.  For example, when a customer buys a product, the transaction is managed by a sales application.  The objects of the transaction are the Customer and the Product.  The transactional data is the time, place, price, discount, payment methods, etc. used at the point of sale. Many thousands of transactional data attributes are needed within the application. These important data elements are local to the applications and have no bearing on other applications. Harmonization and synchronization across applications is not necessary. The Customer and Product objects of the transaction also have a large number of attributes. Customer for example, includes hierarchies, hierarchical and matrixed relationships, contacts, classifications, preferences, accounts, identifiers, profiles, and addresses galore for 'ship to', 'mail to'; 'service at'; etc. Dozens of attributes exist for individuals, hundreds for organizations, and thousands for products. This data has meaning beyond any particular application. It exists in many applications and drives the vital cross application enterprise business processes. These are the processes that define and differentiate the organization. At every decision point, information about the objects of the process determines the direction of the process flow. This is the nature of the data that exists in more than one application, and this is why we call it 'master data'. Let me elaborate. Parties Oracle has developed a party schema to model all participants in your daily business operations. It models people, organizations, groups, customers, contacts, employees, and suppliers. It models their accounts, locations, classifications, and preferences.  And most importantly, it models the vast array of hierarchical and matrixed relationships that exist between all the participants in your real world operations.  The model logically separates people and organizations from their relationships and accounts.  This separation creates flexibility unmatched in the industry and accounts for the fact that the Oracle schema for Customers, Suppliers, and Accounts is a true superset of the wide variety of commercial and homegrown customer models in existence. Sites Sites are places where business is conducted. They can be addresses, clusters such as retail malls, locations within a cluster, floors within a building, places where meters are located, rooms on floors, etc.  Fully understanding all attributes of a site is key to many business processes. Attributes such as 'noise abatement policy' at a point of delivery, or the size of an oven in a business kitchen drive day-to-day activities such as delivery schedules or food promotions. Typically this kind of data is siloed in departments and scattered across applications and spreadsheets.  This leads to conflicting information and poor operational efficiencies. Oracle's Global Single Schema can hold all site attributes in one place and enables a single version of authoritative site information across the enterprise. Products and Services The Oracle Global Single Schema also includes a number of entities that define the products and services a company creates and offers for sale. Key entities include Items organized into Catalogs and Price Lists. The Catalog structures provide for the ability to capture different views of a product such as engineering, manufacturing, and service which are based on a unified product model. As a result, designers, manufacturing engineers, purchasers and partners can work simultaneously on a common product definition. The Catalog schema allows for unlimited attributes, combines them into meaningful groups, and maps them to catalog categories to track these different types of information. The model also maps an unlimited number of functional structures for each item. For example, multiple Bills of Material (BOMs) can be constructed representing requirements BOM, features BOM, and packaging BOM for an item. The Catalog model also supports hierarchical information about each item and all standard Global Data Synchronization attributes. Business Processes Utilizing Linked Data Entities Each business entity codified into a centralized master data environment significantly improves the efficiency of the automated business processes that use the consolidated data.  When all the key business entities used by an organization's process are so consolidated, the advantages are multiplied.  The primary reason for business process breakdowns (i.e. data errors across application boundaries) is eliminated. All processes are positively impacted and business process automation is itself automated.  I like to use the "Call to Resolution" business process as an example to help illustrate this important point. It involves call center applications, service applications, RMA applications, transportation applications, inventory applications, etc. Customer, Site, Product and Supplier master data must all be correct and consistent across these applications.  What's more, the data relationships between customer and product, and product and suppliers must be right. This is the minimum quality needed to insure the business process flows without error. But that is not the end of the story. Critical master data attributes such as customer loyalty, profitability, credit worthiness, and propensity to buy can optimize the call center point of contact component of the process. Critical product information such as alternative parts or equivalent products can optimize the resolution selected by the process. A comprehensive understanding of the 'service at' location can help insure multiple trips are avoided in the process. Full supplier information on reliability, delivery delays, and potential alternates can prevent supplier exceptions and play a significant role in optimizing the process.  In other words, these master data attributes enable the optimization of the "Call to Resolution" enterprise business process. Master data supports and guides business process flows. Thus the phrase 'Master Data' is indeed appropriate. MDM is the software that houses, manages, and governs the master data that resides in all applications and controls the enterprise business processes. A complete master data solution takes a data model that holds fully attributed master data entities and their inter-relationships. Oracle has this model. Oracle, with its deep understanding of application data is the logical choice for managing all your master data within the enterprise whether or not your organization actually runs any Oracle Applications.

    Read the article

  • Source-control 'wet-work'?

    - by Phil Factor
    When a design or creative work is flawed beyond remedy, it is often best to destroy it and start again. The other day, I lost the code to a long and intricate SQL batch I was working on. I’d thought it was impossible, but it happened. With all the technology around that is designed to prevent this occurring, this sort of accident has become a rare event.  If it weren’t for a deranged laptop, and my distraction, the code wouldn’t have been lost this time.  As always, I sighed, had a soothing cup of tea, and typed it all in again.  The new code I hastily tapped in  was much better: I’d held in my head the essence of how the code should work rather than the details: I now knew for certain  the start point, the end, and how it should be achieved. Instantly the detritus of half-baked thoughts fell away and I was able to write logical code that performed better.  Because I could work so quickly, I was able to hold the details of all the columns and variables in my head, and the dynamics of the flow of data. It was, in fact, easier and quicker to start from scratch rather than tidy up and refactor the existing code with its inevitable fumbling and half-baked ideas. What a shame that technology is now so good that developers rarely experience the cleansing shock of losing one’s code and having to rewrite it from scratch.  If you’ve never accidentally lost  your code, then it is worth doing it deliberately once for the experience. Creative people have, until Technology mistakenly prevented it, torn up their drafts or sketches, threw them in the bin, and started again from scratch.  Leonardo’s obsessive reworking of the Mona Lisa was renowned because it was so unusual:  Most artists have been utterly ruthless in destroying work that didn’t quite make it. Authors are particularly keen on writing afresh, and the results are generally positive. Lawrence of Arabia actually lost the entire 250,000 word manuscript of ‘The Seven Pillars of Wisdom’ by accidentally leaving it on a train at Reading station, before rewriting a much better version.  Now, any writer or artist is seduced by technology into altering or refining their work rather than casting it dramatically in the bin or setting a light to it on a bonfire, and rewriting it from the blank page.  It is easy to pick away at a flawed work, but the real creative process is far more brutal. Once, many years ago whilst running a software house that supplied commercial software to local businesses, I’d been supervising an accounting system for a farming cooperative. No packaged system met their needs, and it was all hand-cut code.  For us, it represented a breakthrough as it was for a government organisation, and success would guarantee more contracts. As you’ve probably guessed, the code got mangled in a disk crash just a week before the deadline for delivery, and the many backups all proved to be entirely corrupted by a faulty tape drive.  There were some fragments left on individual machines, but they were all of different versions.  The developers were in despair.  Strangely, I managed to re-write the bulk of a three-month project in a manic and caffeine-soaked weekend.  Sure, that elegant universally-applicable input-form routine was‘nt quite so elegant, but it didn’t really need to be as we knew what forms it needed to support.  Yes, the code lacked architectural elegance and reusability. By dawn on Monday, the application passed its integration tests. The developers rose to the occasion after I’d collapsed, and tidied up what I’d done, though they were reproachful that some of the style and elegance had gone out of the application. By the delivery date, we were able to install it. It was a smaller, faster application than the beta they’d seen and the user-interface had a new, rather Spartan, appearance that we swore was done to conform to the latest in user-interface guidelines. (we switched to Helvetica font to look more ‘Bauhaus’ ). The client was so delighted that he forgave the new bugs that had crept in. I still have the disk that crashed, up in the attic. In IT, we have had mixed experiences from complete re-writes. Lotus 123 never really recovered from a complete rewrite from assembler into C, Borland made the mistake with Arago and Quattro Pro  and Netscape’s complete rewrite of their Navigator 4 browser was a white-knuckle ride. In all cases, the decision to rewrite was a result of extreme circumstances where no other course of action seemed possible.   The rewrite didn’t come out of the blue. I prefer to remember the rewrite of Minix by young Linus Torvalds, or the rewrite of Bitkeeper by a slightly older Linus.  The rewrite of CP/M didn’t do too badly either, did it? Come to think of it, the guy who decided to rewrite the windowing system of the Xerox Star never regretted the decision. I’ll agree that one should often resist calls for a rewrite. One of the worst habits of the more inexperienced programmer is to denigrate whatever code he or she inherits, and then call loudly for a complete rewrite. They are buoyed up by the mistaken belief that they can do better. This, however, is a different psychological phenomenon, more related to the idea of some motorcyclists that they are operating on infinite lives, or the occasional squaddies that if they charge the machine-guns determinedly enough all will be well. Grim experience brings out the humility in any experienced programmer.  I’m referring to quite different circumstances here. Where a team knows the requirements perfectly, are of one mind on methodology and coding standards, and they already have a solution, then what is wrong with considering  a complete rewrite? Rewrites are so painful in the early stages, until that point where one realises the payoff, that even I quail at the thought. One needs a natural disaster to push one over the edge. The trouble is that source-control systems, and disaster recovery systems, are just too good nowadays.   If I were to lose this draft of this very blog post, I know I’d rewrite it much better. However, if you read this, you’ll know I didn’t have the nerve to delete it and start again.  There was a time that one prayed that unreliable hardware would deliver you from an unmaintainable mess of a codebase, but now technology has made us almost entirely immune to such a merciful act of God. An old friend of mine with long experience in the software industry has long had the idea of the ‘source-control wet-work’,  where one hires a malicious hacker in some wild eastern country to hack into one’s own  source control system to destroy all trace of the source to an application. Alas, backup systems are just too good to make this any more than a pipedream. Somehow, it would be difficult to promote the idea. As an alternative, could one construct a source control system that, on doing all the code-quality metrics, would systematically destroy all trace of source code that failed the quality test? Alas, I can’t see many managers buying into the idea. In reading the full story of the near-loss of Toy Story 2, it set me thinking. It turned out that the lucky restoration of the code wasn’t the happy ending one first imagined it to be, because they eventually came to the conclusion that the plot was fundamentally flawed and it all had to be rewritten anyway.  Was this an early  case of the ‘source-control wet-job’?’ It is very hard nowadays to do a rapid U-turn in a development project because we are far too prone to cling to our existing source-code.

    Read the article

  • How to create a virtual network with Azure Connect

    - by Herve Roggero
    If you are trying to establish a virtual network between machines located in disparate networks, you can either use VPN, Virtual Network or Azure Connect. If you want to establish a connection between machines located in Windows Azure, you should consider using the Virtual Network service. If you want to establish a connection between local machines and Virtual Machines in Windows Azure, you may be able to use your existing VPN device (assuming you have one), as long as the device is supported by Microsoft. If the VPN device you are using isn’t supported, or if you are trying to create a virtual network between machines from disparate networks (such as machines located in another cloud provider), you can use Azure Connect. This blog post explains how Azure Connect can help you create virtual networks between multiple servers in the cloud, various servers in different cloud environments, and on-premise. Note: Azure Connect is currently in Technical Preview. About Azure Connect Let’s do a quick review of Azure Connect. This technology implements an IPSec tunnel from machines to to a relay service located in the Microsoft cloud (Azure). So in essence, Azure Connect doesn’t provide a point-to-point connection between machines; the network communication is tunneled through the relay service. The relay service in turn offers a mechanism to enforce basic communication rules that you define through Groups. We will review this later. You could network two or more VMs in the Azure cloud (although you should consider using a Virtual Network if you go this route), or servers in the Azure cloud and other machines in the Amazon cloud for example, or even two or more on-premise servers located in different locations for which a direct network connection is not an option. You can place any number of machines in your topology. Azure Connect gives you great flexibility on how you want to build your virtual network across various environments. So Azure Connect makes sense when you want to: Connect machines located in different cloud providers Connect on-premise machines running in different locations Connect Azure VMs with on-premise (if you do not have a VPN device, or if your device is not supported) Connect Azure Roles (Worker Roles, Web Roles) with on-premise servers or in other cloud providers The diagram below shows you a high level network topology that involves machines in the Windows Azure cloud, other cloud providers and on-premise. You should note that the only required component in this diagram is the Relay itself. The other machines are optional (although your network is useful only if you have two or more machines involved). Relay agents are currently available in three geographic areas: US, Europe and Asia. You can change which region you want to use in the Windows Azure management portal. High Level Network Topology With Azure Connect Azure Connect Agent Azure Connect establishes a virtual network and creates virtual adapters on your machines; these virtual adapters communicate through the Relay using IPSec. This is achieved by installing an agent (the Azure Connect Agent) on all the machines you want in your network topology. However, you do not need to install the agent on Worker Roles and Web Roles; that’s because the agent is already installed for you. Any other machine, including Virtual Machines in Windows Azure, needs the agent installed.  To install the agent, simply go to your Windows Azure portal (http://windows.azure.com) and click on Networks on the bottom left panel. You will see a list of subscriptions under Connect. If you select a subscription, you will be able to click on the Install Local Endpoint icon on top. Clicking on this icon will begin the download and installation process for the agent. Activating Roles for Azure Connect As previously mentioned, you do not need to install the Azure Connect Agent on Worker Roles and Web Roles because it is already loaded. However, you do need to activate them if you want the roles to participate in your network topology. To do this, you will need to click on the Get Activation Token icon. The activation token must then be copied and placed in the configuration file of your roles. For more information on how to perform this step, visit MSDN at http://msdn.microsoft.com/en-us/library/windowsazure/gg432964.aspx. Firewall Rules Note that specific firewall rules must exist to allow the agent to communicate through the Relay. You will need to allow TCP 443 and ICMPv6. For additional information, please visit MSDN at http://msdn.microsoft.com/en-us/library/windowsazure/gg433061.aspx. CA Certificates You can optionally require agents to sign their activation request with the Relay using a trusted certificate issued by a Certificate Authority (CA). Click on Activation Options to learn more. Groups To create your network topology you must first create a group. A group represents a logical container of endpoints (or machines) that can communicate through the Relay. You can create multiple groups allowing you to manage network communication differently. For example you could create a DEVELOPMENT group and a PRODUCTION group. To add an endpoint you must first install an agent that will create a virtual adapter on the machine on which it is installed (as discussed in the previous section). Once you have created a group and installed the agents, the machines will appear in the Windows Azure management portal and you can start assigning machines to groups. The next figure shows you that I created a group called LocalGroup and assigned two machines (both on-premise) to that group. Groups and Computers in Azure Connect As I mentioned previously you can allow these machines to establish a network connection. To do this, you must enable the Interconnected option in the group. The following diagram shows you the definition of the group. In this topology I chose to include local machines only, but I could also add worker roles and web roles in the Azure Roles section (you must first activate your roles, as discussed previously). You could also add other Groups, allowing you to manage inter-group communication. Defining a Group in Azure Connect Testing the Connection Now that my agents have been installed on my two machines, the group defined and the Interconnected option checked, I can test the connection between my machines. The next screenshot shows you that I sent a PING request to DEVLAP02 from DEVDSK02. The PING request was successful. Note however that the time is in the hundreds of milliseconds on average. That is to be expected because the machines are connecting through the Relay located in the cloud. Going through the Relay introduces an extra hop in the communication chain, so if your systems rely on high performance, you may want to conduct some basic performance tests. Sending a PING Request Through The Relay Conclusion As you can see, creating a network topology between machines using the Azure Connect service is simple. It took me less than five minutes to create the above configuration, including the time it took to install the Azure Connect agents on the two machines. The flexibility of Azure Connect allows you to create a virtual network between disparate environments, as long as your operating systems are supported by the agent. For more information on Azure Connect, visit the MSDN website at http://msdn.microsoft.com/en-us/library/windowsazure/gg432997.aspx. About Herve Roggero Herve Roggero, Windows Azure MVP, is the founder of Blue Syntax Consulting, a company specialized in cloud computing products and services. Herve's experience includes software development, architecture, database administration and senior management with both global corporations and startup companies. Herve holds multiple certifications, including an MCDBA, MCSE, MCSD. He also holds a Master's degree in Business Administration from Indiana University. Herve is the co-author of "PRO SQL Azure" from Apress and runs the Azure Florida Association (on LinkedIn: http://www.linkedin.com/groups?gid=4177626). For more information on Blue Syntax Consulting, visit www.bluesyntax.net. Special Thanks I would like thank those that helped me figure out how Azure Connect works: Marcel Meijer - http://blogs.msmvps.com/marcelmeijer/ Michael Wood - Http://www.mvwood.com Glenn Block - http://www.codebetter.com/glennblock Yves Goeleven - http://cloudshaper.wordpress.com/ Sandrino Di Mattia - http://fabriccontroller.net/ Mike Martin - http://techmike2kx.wordpress.com

    Read the article

  • Clean way to use mutable implementation of Immutable interfaces for encapsulation

    - by dsollen
    My code is working on some compost relationship which creates a tree structure, class A has many children of type B, which has many children of type C etc. The lowest level class, call it bar, also points to a connected bar class. This effectively makes nearly every object in my domain inter-connected. Immutable objects would be problematic due to the expense of rebuilding almost all of my domain to make a single change to one class. I chose to go with an interface approach. Every object has an Immutable interface which only publishes the getter methods. I have controller objects which constructs the domain objects and thus has reference to the full objects, thus capable of calling the setter methods; but only ever publishes the immutable interface. Any change requested will go through the controller. So something like this: public interface ImmutableFoo{ public Bar getBar(); public Location getLocation(); } public class Foo implements ImmutableFoo{ private Bar bar; private Location location; @Override public Bar getBar(){ return Bar; } public void setBar(Bar bar){ this.bar=bar; } @Override public Location getLocation(){ return Location; } } public class Controller{ Private Map<Location, Foo> fooMap; public ImmutableFoo addBar(Bar bar){ Foo foo=fooMap.get(bar.getLocation()); if(foo!=null) foo.addBar(bar); return foo; } } I felt the basic approach seems sensible, however, when I speak to others they always seem to have trouble envisioning what I'm describing, which leaves me concerned that I may have a larger design issue then I'm aware of. Is it problematic to have domain objects so tightly coupled, or to use the quasi-mutable approach to modifying them? Assuming that the design approach itself isn't inherently flawed the particular discussion which left me wondering about my approach had to do with the presence of business logic in the domain objects. Currently I have my setter methods in the mutable objects do error checking and all other logic required to verify and make a change to the object. It was suggested that this should be pulled out into a service class, which applies all the business logic, to simplify my domain objects. I understand the advantage in mocking/testing and general separation of logic into two classes. However, with a service method/object It seems I loose some of the advantage of polymorphism, I can't override a base class to add in new error checking or business logic. It seems, if my polymorphic classes were complicated enough, I would end up with a service method that has to check a dozen flags to decide what error checking and business logic applies. So, for example, if I wanted to have a childFoo which also had a size field which should be compared to bar before adding par my current approach would look something like this. public class Foo implements ImmutableFoo{ public void addBar(Bar bar){ if(!getLocation().equals(bar.getLocation()) throw new LocationException(); this.bar=bar; } } public interface ImmutableChildFoo extends ImmutableFoo{ public int getSize(); } public ChildFoo extends Foo implements ImmutableChildFoo{ private int size; @Override public int getSize(){ return size; } @Override public void addBar(Bar bar){ if(getSize()<bar.getSize()){ throw new LocationException(); super.addBar(bar); } My colleague was suggesting instead having a service object that looks something like this (over simplified, the 'service' object would likely be more complex). public interface ImmutableFoo{ ///original interface, presumably used in other methods public Location getLocation(); public boolean isChildFoo(); } public interface ImmutableSizedFoo implements ImmutableFoo{ public int getSize(); } public class Foo implements ImmutableSizedFoo{ public Bar bar; @Override public void addBar(Bar bar){ this.bar=bar; } @Override public int getSize(){ //default size if no size is known return 0; } @Override public boolean isChildFoo return false; } } public ChildFoo extends Foo{ private int size; @Override public int getSize(){ return size; } @Override public boolean isChildFoo(); return true; } } public class Controller{ Private Map<Location, Foo> fooMap; public ImmutableSizedFoo addBar(Bar bar){ Foo foo=fooMap.get(bar.getLocation()); service.addBarToFoo(foo, bar); returned foo; } public class Service{ public static void addBarToFoo(Foo foo, Bar bar){ if(foo==null) return; if(!foo.getLocation().equals(bar.getLocation())) throw new LocationException(); if(foo.isChildFoo() && foo.getSize()<bar.getSize()) throw new LocationException(); foo.setBar(bar); } } } Is the recommended approach of using services and inversion of control inherently superior, or superior in certain cases, to overriding methods directly? If so is there a good way to go with the service approach while not loosing the power of polymorphism to override some of the behavior?

    Read the article

  • Customizing UPK outputs (Part 2 - Player)

    - by [email protected]
    There are a few things that can be done to give the Player output a personalized look to match your corporate branding. In my previous post, I talked about changing the logo. In addition to the logo, you can change the graphic in the heading, button colors, border colors and many other items. Prior to making any customizations, I strongly recommend making a copy of the existing Player style. This will give you a backup in case things go wrong. I'd also recommend that you create your own brand. This way, when you install the newest updates from us, your brand will remain intact. Creating your own brand is pretty easy. Make sure you have modify permissions on the publishing styles directory, if you are using a multi-user installation. Under the Publishing/Styles folder, create a new folder with your company name. Copy all the publishing styles from the UPK folder to your newly created folder. Now, when you go through the Publishing wizard, you will have two categories to choose from: the UPK category or your custom category. Now, for updating the Player output. First, the graphic that appears on the right hand side of the Player. If you're using a multi-user installation, check out the player style from your custom brand. Open the player style. Open the img folder. The file named "banner_image.png" represents the graphic that appears on the right hand side of the player. It is currently sized at 425 x 54. Try to keep your graphic about the same size. Rename your graphic file to be "banner_image.png", and drag it into the img folder. Save the package. Check in the package if you are in a multi-user installation. You've just updated the banner heading! Next, let's work on updating some of the other colors in the player. All the customizable areas are located in the skin.css file which is in the root of the Player style. Many of our customers update the colors to match their own theme. You don't have to be a programmer to make these changes, honest. :) To change the colors in the player: Make a copy of the original skin.css file. (This is to make sure you have a working version to revert to, in case something goes wrong.) Open the skin.css file from the Player package. You can edit it using Notepad. Make the desired changes. Save the file. Save the package. Publish to view your new changes. When you open the skin.css, you will see groupings like this: .headerDivbar { height: 21px; background-color: #CDE2FD; } Change the value of the background-color to the color of your choice. Note that you cannot use "red" as a color, but rather you should enter the hexadecimal color code. If you don't know the color code, search the web for "hexadecimal colors" and you'll find many sites to provide the information. Here are a few of the variables that you can update. Heading: .headerDivbar -this changes the color of the banner that appears under the graphic Button colors: .navCellOn - changes the color of the mode buttons when your mouse is hovering on them. .navCellOff - changes the color of the mode buttons when the mouse is not over them Lines: .thorizontal - this is the color of the horizontal lines surrounding the outline .tvertical - this is the color of the vertical lines on the left and right margin in the outline. .tsep - this is the color of the line that separates the outline from the content area Search frame: .tocSearchColor - this is the color of the search area .tocFrameText - this is the background color of the TOC tree. Hint: If you want to try out the changes prior to updating the style, you can update the skin.css in some content you've already published for the player (it's located in the css folder of the player package). This way, you can immediately see the changes without going through publishing. Once you're happy with the changes, update the skin.css in player style. Want to customize more? Refer to the "Customizing the Player" section of the Content Development manual for more details on all the options in the skin.css that can be changed, and pictures of what each variable controls. I'd love to see how you've customized the player for your corporate needs. Also, if there are other areas of the player you'd like to modify but have not been able to, let us know. Feel free to share your thoughts in the comments. --Maria Cozzolino, Manager of Requirements & UI Design for UPK

    Read the article

  • Elegance, thy Name is jQuery

    - by SGWellens
    So, I'm browsing though some questions over on the Stack Overflow website and I found a good jQuery question just a few minutes old. Here is a link to it. It was a tough question; I knew that by answering it, I could learn new stuff and reinforce what I already knew: Reading is good, doing is better. Maybe I could help someone in the process too. I cut and pasted the HTML from the question into my Visual Studio IDE and went back to Stack Overflow to reread the question. Dang, someone had already answered it! And it was a great answer. I never even had a chance to start analyzing the issue. Now I know what a one-legged man feels like in an ass-kicking contest. Nevertheless, since the question and answer were so interesting, I decided to dissect them and learn as much as possible. The HTML consisted of some divs separated by h3 headings.  Note the elements are laid out sequentially with no programmatic grouping: <h3 class="heading">Heading 1</h3> <div>Content</div> <div>More content</div> <div>Even more content</div><h3 class="heading">Heading 2</h3> <div>some content</div> <div>some more content</div><h3 class="heading">Heading 3</h3> <div>other content</div></form></body>  The requirement was to wrap a div around each h3 heading and the subsequent divs grouping them into sections. Why? I don't know, I suppose if you screen-scrapped some HTML from another site, you might want to reformat it before displaying it on your own. Anyways… Here is the marvelously, succinct posted answer: $('.heading').each(function(){ $(this).nextUntil('.heading').andSelf().wrapAll('<div class="section">');}); I was familiar with all the parts except for nextUntil and andSelf. But, I'll analyze the whole answer for completeness. I'll do this by rewriting the posted answer in a different style and adding a boat-load of comments: function Test(){ // $Sections is a jQuery object and it will contain three elements var $Sections = $('.heading'); // use each to iterate over each of the three elements $Sections.each(function () { // $this is a jquery object containing the current element // being iterated var $this = $(this); // nextUntil gets the following sibling elements until it reaches // an element with the CSS class 'heading' // andSelf adds in the source element (this) to the collection $this = $this.nextUntil('.heading').andSelf(); // wrap the elements with a div $this.wrapAll('<div class="section" >'); });}  The code here doesn't look nearly as concise and elegant as the original answer. However, unless you and your staff are jQuery masters, during development it really helps to work through algorithms step by step. You can step through this code in the debugger and examine the jQuery objects to make sure one step is working before proceeding on to the next. It's much easier to debug and troubleshoot when each logical coding step is a separate line. Note: You may think the original code runs much faster than this version. However, the time difference is trivial: Not enough to worry about: Less than 1 millisecond (tested in IE and FF). Note: You may want to jam everything into one line because it results in less traffic being sent to the client. That is true. However, most Internet servers now compress HTML and JavaScript by stripping out comments and white space (go to Bing or Google and view the source). This feature should be enabled on your server: Let the server compress your code, you don't need to do it. Free Career Advice: Creating maintainable code is Job One—Maximum Priority—The Prime Directive. If you find yourself suddenly transferred to customer support, it may be that the code you are writing is not as readable as it could be and not as readable as it should be. Moving on… I created a CSS class to see the results: .section{ background-color: yellow; border: 2px solid black; margin: 5px;} Here is the rendered output before:   …and after the jQuery code runs.   Pretty Cool! But, while playing with this code, the logic of nextUntil began to bother me: What happens in the last section? What stops elements from being collected since there are no more elements with the .heading class? The answer is nothing.  In this case it stopped because it was at the end of the page.  But what if there were additional HTML elements? I added an anchor tag and another div to the HTML: <h3 class="heading">Heading 1</h3> <div>Content</div> <div>More content</div> <div>Even more content</div><h3 class="heading">Heading 2</h3> <div>some content</div> <div>some more content</div><h3 class="heading">Heading 3</h3> <div>other content</div><a>this is a link</a><div>unrelated div</div> </form></body> The code as-is will include both the anchor and the unrelated div. This isn't what we want.   My first attempt to correct this used the filter parameter of the nextUntil function: nextUntil('.heading', 'div')  This will only collect div elements. But it merely skipped the anchor tag and it still collected the unrelated div:   The problem is we need a way to tell the nextUntil function when to stop. CSS selectors to the rescue: nextUntil('.heading, a')  This tells nextUntil to stop collecting sibling elements when it gets to an element with a .heading class OR when it gets to an anchor tag. In this case it solved the problem. FYI: The comma operator in a CSS selector allows multiple criteria.   Bingo! One final note, we could have broken the code down even more: We could have replaced the andSelf function here: $this = $this.nextUntil('.heading, a').andSelf(); With this: // get all the following siblings and then add the current item$this = $this.nextUntil('.heading, a');$this.add(this);  But in this case, the andSelf function reads real nice. In my opinion. Here's a link to a jsFiddle if you want to play with it. I hope someone finds this useful Steve Wellens CodeProject

    Read the article

  • Unmet Dependencies with kdelibs5-data

    - by Jitesh
    I was trying to install Amarok 1.4 on Ubuntu 12.04 (Gnome-classic), by following this instructions. Problem started after giving these two commands dpkg -i kdelibs5-data_4.6.2-0ubuntu4_all.deb dpkg -i kdelibs-data_3.5.10.dfsg.1-5ubuntu2_all.deb Now, immediately after these commands, Ubuntu Updater popped up and gave me an error that the package catalog is broken and needs to be repaired. Nothing can be installed or removed till then. It also offered a suggestion to run apt-get install -f. I tried that, but again got the same error.Also tried apt-get clean followed by apt-get install -f. Again got the following output: jitesh@jitesh-desktop:~$ sudo apt-get clean jitesh@jitesh-desktop:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: kdelibs5-data The following packages will be upgraded: kdelibs5-data 1 upgraded, 0 newly installed, 0 to remove and 18 not upgraded. 2 not fully installed or removed. Need to get 2,832 kB of archives. After this operation, 2,998 kB disk space will be freed. Do you want to continue [Y/n]? y Get:1 http: //in.archive.ubuntu.com/ubuntu/precise-updates/main kdelibs5-data all 4:4.8.4a-0ubuntu0.2 [2,832 kB] Fetched 2,832 kB in 32s (86.6 kB/s) dpkg: dependency problems prevent configuration of kdelibs5-data: libplasma3 (4:4.8.4a-0ubuntu0.2) breaks kdelibs5-data (<< 4:4.6.80~) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. kate-data (4:4.8.4-0ubuntu0.1) breaks kdelibs5-data (<< 4:4.6.90) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. katepart (4:4.8.4-0ubuntu0.1) breaks kdelibs5-data (<< 4:4.6.90) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. dpkg: error processing kdelibs5-data (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of kdelibs-data: kdelibs-data depends on kdelibs5-data; however: Package kdelibs5-data is not configured yet. No apport report written because MaxReports is reached already dpkg: error processing kdelibs-data (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: kdelibs5-data kdelibs-data W: Duplicate sources.list entry http://archive.canonical.com/ubuntu/ precise/partner i386 Packages (/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_precise_partner_binary-i386_Packages) W: You may want to run apt-get update to correct these problems E: Sub-process /usr/bin/dpkg returned an error code (1) As I thought the error was related to configuring kdelibs, I tried to configure using dpkg. But got the following errors: jitesh@jitesh-desktop:~$ sudo dpkg --configure -a dpkg: dependency problems prevent configuration of kdelibs5-data: libplasma3 (4:4.8.4a-0ubuntu0.2) breaks kdelibs5-data (<< 4:4.6.80~) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. kate-data (4:4.8.4-0ubuntu0.1) breaks kdelibs5-data (<< 4:4.6.90) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. katepart (4:4.8.4-0ubuntu0.1) breaks kdelibs5-data (<< 4:4.6.90) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. dpkg: error processing kdelibs5-data (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of kdelibs-data: kdelibs-data depends on kdelibs5-data; however: Package kdelibs5-data is not configured yet. dpkg: error processing kdelibs-data (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: kdelibs5-data kdelibs-data jitesh@jitesh-desktop:~$ Now I dont have any idea how to proceed. I am unable to install anything from Software Centre or using Terminal now. Some basic info: Core2Duo, dual booting Ubuntu 12.04 with Win7. Fresh install of Ubuntu 12.04 (not upgrade). Incidentally, I had first upgraded from 10.04 and had succesfully installed Amarok 1.4 following this same method. But due to other issues, i had to format and do a clean install of 12.04. Now when I tried to install Amarok 1.4, I'm getting these errors. I also have digiKam and k3b installed, if that can be of any help. I use digiKam a lot, so removing KDE is not feasible for me. Any help on this issue will be highly appreciated. Thanks in advance.

    Read the article

  • Solaris 11 SRU / Update relationship explained, and blackout period on delivery of new bug fixes eliminated

    - by user12244672
    Relationship between SRUs and Update releases As you may know, Support Repository Updates (SRUs) for Oracle Solaris 11 are released monthly and are available to customers with an appropriate support contract.  SRUs primarily deliver bug fixes.  They may also deliver low risk feature enhancements. Solaris Update are typically released once or twice a year, containing support for new hardware, new software feature enhancements, and all bug fixes available at the time the Update content was finalized.  They also contain a significant number of new bug fixes, for issues found internally in Oracle and complex customer bug fixes which  require significant "soak" time to ensure their efficacy prior to release. Changes to SRU and Update Naming Conventions We're changing the naming convention of Update releases from a date based format such as Oracle Solaris 10 8/11 to a simpler "dot" version numbering, e.g. Oracle Solaris 11.1. Oracle Solaris 11 11/11 (i.e. the initial Oracle Solaris 11 release) may be referred to as 11.0. SRUs will simply be named as "dot.dot" releases, e.g. Oracle Solaris 11.1.1, for SRU1 after Oracle Solaris 11.1. Many Oracle products and infrastructure tools such as BugDB and MOS are tailored towards this "dot.dot" style of release naming, so these name changes align Oracle Solaris with these conventions. No Blackout Periods on Bug Fix Releases The Oracle Solaris 11 release process has been enhanced to eliminate blackout periods on the delivery of new bug fixes to customers. Previously, Oracle Solaris Updates were a superset of all preceding bug fix deliveries.  This made for a very simple update message - that which releases later is always a superset of that which was delivered previously. However, it had a downside.  Once the contents of an Update release were frozen prior to release, the release of new bug fixes for customer issues was also frozen to maintain the Update's superset relationship. Since the amount of change allowed into the final internal builds of an Update release is reduced to mitigate risk, this throttling back also impacted the release of new bug fixes to customers. This meant that there was effectively a 6 to 9 week hiatus on the release of new bug fixes prior to the release of each Update.  That wasn't good for customers awaiting critical bug fixes. We've eliminated this hiatus on the delivery of new bug fixes in Oracle Solaris 11 by allowing new bug fixes to continue to be released in SRUs even after the contents of the next Update release have been frozen. The release of SRUs will remain contiguous, with the first SRU released after the Update release effectively being a superset of both the the Update release and all preceding SRUs*.  That is, later SRUs are supersets of the content of previous SRUs. Therefore, the progression path from the final SRUs prior to the Update release is to the first SRU after the Update release, rather than to the Update release itself. The timeline / logical sequence of releases can be shown as follows: Updates: 11.0                                                11.1                               11.2     etc.                  \                                                         \                                    \ SRUs:       11.0.1, 11.0.2,...,11.0.12, 11.0.13, 11.1.1, 11.1.2,...,11.1.x, 11.2.1, etc. For example, for systems with Oracle Solaris 11 11/11 SRU12.4 or later installed, the recommended update path is to Oracle Solaris 11.1.1 (i.e. SRU1 after Solaris 11.1) or later rather than to the Solaris 11.1 release itself.  This will ensure no bug fixes are "lost" during the update. If for any reason you do wish to update from SRU12.4 or later to the 11.1 release itself - for example to update a test system - the instructions to do so are in the SRU12.4 README, https://updates.oracle.com/Orion/Services/download?type=readme&aru=15564533 For systems with Oracle Solaris 11 11/11 SRU11.4 or earlier installed, customers can update to either the 11.1 release or any 11.1 SRU as both will be supersets of their current version. Please do read the README of the SRU you are updating to, as it will contain important installation instructions which will save you time and effort. *Nerdy details: SRUs only contain the latest change delta relative to the Update on which they are based.  Their dependencies will, however, effectively pull in the Update content.  Customers maintaining a local Repo (e.g. behind their firewall), need to add both the 11.1 content and the relevant SRU content to their Repo, to enable the SRU's dependencies to be resolved.  Both will be available from the standard Support Repo and from MOS.  This is no different to existing SRUs for Oracle Solaris 11.0, whereby you may often get away with using just the SRU content to update, but the original 11.0 content may be needed in the Repo to resolve dependencies.

    Read the article

  • Data-driven animation states

    - by user8363
    I'm trying to handle animations in a 2D game engine hobby project, without hard-coding them. Hard coding animation states seems like a common but very strange phenomenon, to me. A little background: I'm working with an entity system where components are bags of data and subsystems act upon them. I chose to use a polling system to update animation states. With animation states I mean: "walking_left", "running_left", "walking_right", "shooting", ... My idea to handle animations was to design it as a data driven model. Data could be stored in an xml file, a rdbms, ... And could be loaded at the start of a game / level/ ... This way you can easily edit animations and transitions without having to go change the code everywhere in your game. As an example I made an xml draft of the data definitions I had in mind. One very important piece of data would simply be the description of an animation. An animation would have a unique id (a descriptive name). It would hold a reference id to an image (the sprite sheet it uses, because different animations may use different sprite sheets). The frames per second to run the animation on. The "replay" here defines if an animation should be run once or infinitely. Then I defined a list of rectangles as frames. <animation id='WIZARD_WALK_LEFT'> <image id='WIZARD_WALKING' /> <fps>50</fps> <replay>true</replay> <frames> <rectangle> <x>0</x> <y>0</y> <width>45</width> <height>45</height> </rectangle> <rectangle> <x>45</x> <y>0</y> <width>45</width> <height>45</height> </rectangle> </frames> </animation> Animation data would be loaded and held in an animation resource pool and referenced by game entities that are using it. It would be treated as a resource like an image, a sound, a texture, ... The second piece of data to define would be a state machine to handle animation states and transitions. This defines each state a game entity can be in, which states it can transition to and what triggers that state change. This state machine would differ from entity to entity. Because a bird might have states "walking" and "flying" while a human would only have the state "walking". However it could be shared by different entities because multiple humans will probably have the same states (especially when you define some common NPCs like monsters, etc). Additionally an orc might have the same states as a human. Just to demonstrate that this state definition might be shared but only by a select group of game entities. <state id='IDLE'> <event trigger='LEFT_DOWN' goto='MOVING_LEFT' /> <event trigger='RIGHT_DOWN' goto='MOVING_RIGHT' /> </state> <state id='MOVING_LEFT'> <event trigger='LEFT_UP' goto='IDLE' /> <event trigger='RIGHT_DOWN' goto='MOVING_RIGHT' /> </state> <state id='MOVING_RIGHT'> <event trigger='RIGHT_UP' goto='IDLE' /> <event trigger='LEFT_DOWN' goto='MOVING_LEFT' /> </state> These states can be handled by a polling system. Each game tick it grabs the current state of a game entity and checks all triggers. If a condition is met it changes the entity's state to the "goto" state. The last part I was struggling with was how to bind animation data and animation states to an entity. The most logical approach seemed to me to add a pointer to the state machine data an entity uses and to define for each state in that machine what animation it uses. Here is an xml example how I would define the animation behavior and graphical representation of some common entities in a game, by addressing animation state and animation data id. Note that both "wizard" and "orc" have the same animation states but a different animation. Also, a different animation could mean a different sprite sheet, or even a different sequence of animations (an animation could be longer or shorter). <entity name="wizard"> <state id="IDLE" animation="WIZARD_IDLE" /> <state id="MOVING_LEFT" animation="WIZARD_WALK_LEFT" /> </entity> <entity name="orc"> <state id="IDLE" animation="ORC_IDLE" /> <state id="MOVING_LEFT" animation="ORC_WALK_LEFT" /> </entity> When the entity is being created it would add a list of states with state machine data and an animation data reference. In the future I would use the entity system to build whole entities by defining components in a similar xml format. -- This is what I have come up with after some research. However I had some trouble getting my head around it, so I was hoping op some feedback. Is there something here what doesn't make sense, or is there a better way to handle these things? I grasped the idea of iterating through frames but I'm having trouble to take it a step further and this is my attempt to do that.

    Read the article

  • Source-control 'wet-work'?

    - by Phil Factor
    When a design or creative work is flawed beyond remedy, it is often best to destroy it and start again. The other day, I lost the code to a long and intricate SQL batch I was working on. I’d thought it was impossible, but it happened. With all the technology around that is designed to prevent this occurring, this sort of accident has become a rare event.  If it weren’t for a deranged laptop, and my distraction, the code wouldn’t have been lost this time.  As always, I sighed, had a soothing cup of tea, and typed it all in again.  The new code I hastily tapped in  was much better: I’d held in my head the essence of how the code should work rather than the details: I now knew for certain  the start point, the end, and how it should be achieved. Instantly the detritus of half-baked thoughts fell away and I was able to write logical code that performed better.  Because I could work so quickly, I was able to hold the details of all the columns and variables in my head, and the dynamics of the flow of data. It was, in fact, easier and quicker to start from scratch rather than tidy up and refactor the existing code with its inevitable fumbling and half-baked ideas. What a shame that technology is now so good that developers rarely experience the cleansing shock of losing one’s code and having to rewrite it from scratch.  If you’ve never accidentally lost  your code, then it is worth doing it deliberately once for the experience. Creative people have, until Technology mistakenly prevented it, torn up their drafts or sketches, threw them in the bin, and started again from scratch.  Leonardo’s obsessive reworking of the Mona Lisa was renowned because it was so unusual:  Most artists have been utterly ruthless in destroying work that didn’t quite make it. Authors are particularly keen on writing afresh, and the results are generally positive. Lawrence of Arabia actually lost the entire 250,000 word manuscript of ‘The Seven Pillars of Wisdom’ by accidentally leaving it on a train at Reading station, before rewriting a much better version.  Now, any writer or artist is seduced by technology into altering or refining their work rather than casting it dramatically in the bin or setting a light to it on a bonfire, and rewriting it from the blank page.  It is easy to pick away at a flawed work, but the real creative process is far more brutal. Once, many years ago whilst running a software house that supplied commercial software to local businesses, I’d been supervising an accounting system for a farming cooperative. No packaged system met their needs, and it was all hand-cut code.  For us, it represented a breakthrough as it was for a government organisation, and success would guarantee more contracts. As you’ve probably guessed, the code got mangled in a disk crash just a week before the deadline for delivery, and the many backups all proved to be entirely corrupted by a faulty tape drive.  There were some fragments left on individual machines, but they were all of different versions.  The developers were in despair.  Strangely, I managed to re-write the bulk of a three-month project in a manic and caffeine-soaked weekend.  Sure, that elegant universally-applicable input-form routine was‘nt quite so elegant, but it didn’t really need to be as we knew what forms it needed to support.  Yes, the code lacked architectural elegance and reusability. By dawn on Monday, the application passed its integration tests. The developers rose to the occasion after I’d collapsed, and tidied up what I’d done, though they were reproachful that some of the style and elegance had gone out of the application. By the delivery date, we were able to install it. It was a smaller, faster application than the beta they’d seen and the user-interface had a new, rather Spartan, appearance that we swore was done to conform to the latest in user-interface guidelines. (we switched to Helvetica font to look more ‘Bauhaus’ ). The client was so delighted that he forgave the new bugs that had crept in. I still have the disk that crashed, up in the attic. In IT, we have had mixed experiences from complete re-writes. Lotus 123 never really recovered from a complete rewrite from assembler into C, Borland made the mistake with Arago and Quattro Pro  and Netscape’s complete rewrite of their Navigator 4 browser was a white-knuckle ride. In all cases, the decision to rewrite was a result of extreme circumstances where no other course of action seemed possible.   The rewrite didn’t come out of the blue. I prefer to remember the rewrite of Minix by young Linus Torvalds, or the rewrite of Bitkeeper by a slightly older Linus.  The rewrite of CP/M didn’t do too badly either, did it? Come to think of it, the guy who decided to rewrite the windowing system of the Xerox Star never regretted the decision. I’ll agree that one should often resist calls for a rewrite. One of the worst habits of the more inexperienced programmer is to denigrate whatever code he or she inherits, and then call loudly for a complete rewrite. They are buoyed up by the mistaken belief that they can do better. This, however, is a different psychological phenomenon, more related to the idea of some motorcyclists that they are operating on infinite lives, or the occasional squaddies that if they charge the machine-guns determinedly enough all will be well. Grim experience brings out the humility in any experienced programmer.  I’m referring to quite different circumstances here. Where a team knows the requirements perfectly, are of one mind on methodology and coding standards, and they already have a solution, then what is wrong with considering  a complete rewrite? Rewrites are so painful in the early stages, until that point where one realises the payoff, that even I quail at the thought. One needs a natural disaster to push one over the edge. The trouble is that source-control systems, and disaster recovery systems, are just too good nowadays.   If I were to lose this draft of this very blog post, I know I’d rewrite it much better. However, if you read this, you’ll know I didn’t have the nerve to delete it and start again.  There was a time that one prayed that unreliable hardware would deliver you from an unmaintainable mess of a codebase, but now technology has made us almost entirely immune to such a merciful act of God. An old friend of mine with long experience in the software industry has long had the idea of the ‘source-control wet-work’,  where one hires a malicious hacker in some wild eastern country to hack into one’s own  source control system to destroy all trace of the source to an application. Alas, backup systems are just too good to make this any more than a pipedream. Somehow, it would be difficult to promote the idea. As an alternative, could one construct a source control system that, on doing all the code-quality metrics, would systematically destroy all trace of source code that failed the quality test? Alas, I can’t see many managers buying into the idea. In reading the full story of the near-loss of Toy Story 2, it set me thinking. It turned out that the lucky restoration of the code wasn’t the happy ending one first imagined it to be, because they eventually came to the conclusion that the plot was fundamentally flawed and it all had to be rewritten anyway.  Was this an early  case of the ‘source-control wet-job’?’ It is very hard nowadays to do a rapid U-turn in a development project because we are far too prone to cling to our existing source-code.

    Read the article

  • Five development tools I can't live without

    - by bconlon
    When applying to join Geeks with Blogs I had to specify the development tools I use every day. That got me thinking, it's taken a long time to whittle my tools of choice down to the selection I use, so it might be worth sharing. Before I begin, I appreciate we all have our preferred development tools, but these are the ones that work for me. Microsoft Visual Studio Microsoft Visual Studio has been my development tool of choice for more years than I care to remember. I first used this when it was Visual C++ 1.5 (hats off to those who started on 1.0) and by 2.2 it had everything I needed from a C++ IDE. Versions 4 and 5 followed and if I had to guess I would expect more Windows applications are written in VC++ 6 and VB6 than any other language. Then came the not so great versions Visual Studio .Net 2002 (7.0) and 2003 (7.1). If I'm honest I was still using v6. 2005 was better and 2008 was simply brilliant. Everything worked, the compiler was super fast and I was happy again...then came 2010...oh dear. 2010 is a big step backwards for me. It's not encouraging for my upcoming WPF exploits that 2010 is fronted in WPF technology, with the forever growing Find/Replace dialog, the issues with C++ intellisense, and the buggy debugger. That said it is still my tool of choice but I hope they sort the issue in SP1. I've tried other IDEs like Visual Age and Eclipse, but for me Visual Studio is the best. A really great tool. Liquid XML Studio XML development is a tricky business. The W3C standards are often difficult to get to the bottom of so it's great to have a graphical tool to help. I first used Liquid Technologies 5 or 6 years back when I needed to process XML data in C++. Their excellent XML Data Binding tool has an easy to use Wizard UI (as compared to Castor or JAXB command line tools) and allows you to generate code from an XML Schema. So instead of having to deal with untyped nodes like with a DOM parser, instead you get an Object Model providing a custom API in C++, C#, VB etc. More recently they developed a graphical XML IDE with XML Editor, XSLT, XQuery debugger and other XML tools. So now I can develop an XML Schema graphically, click a button to generate a Sample XML document, and click another button to run the Wizard to generate code including a Sample Application that will then load my Sample XML document into the generated object model. This is a very cool toolset. Note: XML Data Binding is nothing to do with WPF Data Binding, but I hope to cover both in more detail another time. .Net Reflector Note: I've just noticed that starting form the end of February 2011 this will no longer be a free tool !! .Net Reflector turns .Net byte code back into C# source code. But how can it work this magic? Well the clue is in the name, it uses reflection to inspect a compiled .Net assembly. The assembly is compiled to byte code, it doesn't get compiled to native machine code until its needed using a just-in-time (JIT) compiler. The byte code still has all of the information needed to see classes, variables. methods and properties, so reflector gathers this information and puts it in a handy tree. I have used .Net Reflector for years in order to understand what the .Net Framework is doing as it sometimes has undocumented, quirky features. This really has been invaluable in certain instances and I cannot praise enough kudos on the original developer Lutz Roeder. Smart Assembly In order to stop nosy geeks looking at our code using a tool like .Net Reflector, we need to obfuscate (mess up) the byte code. Smart Assembly is a tool that does this. Again I have used this for a long time. It is very quick and easy to use. Another excellent tool. Coincidentally, .Net Reflector and Smart Assembly are now both owned by Red Gate. Again kudos goes to the original developer Jean-Sebastien Lange. TortoiseSVN SVN (Apache Subversion) is a Source Control System developed as an open source project. TortoiseSVN is a graphical UI wrapper over SVN that hooks into Windows Explorer to enable files to be Updated, Committed, Merged etc. from the right click menu. This is an essential tool for keeping my hard work safe! Many years ago I used Microsoft Source Safe and I disliked CVS type systems. But TortoiseSVN is simply the best source control tool I have ever used. --- So there you have it, my top 5 development tools that I use (nearly) every day and have helped to make my working life a little easier. I'm sure there are other great tools that I wish I used but have never heard of, but if you have not used any of the above, I would suggest you check them out as they are all very, very cool products. #

    Read the article

  • We've completed the first iteration

    - by CliveT
    There are a lot of features in C# that are implemented by the compiler and not by the underlying platform. One such feature is a lambda expression. Since local variables cannot be accessed once the current method activation finishes, the compiler has to go out of its way to generate a new class which acts as a home for any variable whose lifetime needs to be extended past the activation of the procedure. Take the following example:     Random generator = new Random();     Func func = () = generator.Next(10); In this case, the compiler generates a new class called c_DisplayClass1 which is marked with the CompilerGenerated attribute. [CompilerGenerated] private sealed class c__DisplayClass1 {     // Fields     public Random generator;     // Methods     public int b__0()     {         return this.generator.Next(10);     } } Two quick comments on this: (i)    A display was the means that compilers for languages like Algol recorded the various lexical contours of the nested procedure activations on the stack. I imagine that this is what has led to the name. (ii)    It is a shame that the same attribute is used to mark all compiler generated classes as it makes it hard to figure out what they are being used for. Indeed, you could imagine optimisations that the runtime could perform if it knew that classes corresponded to certain high level concepts. We can see that the local variable generator has been turned into a field in the class, and the body of the lambda expression has been turned into a method of the new class. The code that builds the Func object simply constructs an instance of this class and initialises the fields to their initial values.     c__DisplayClass1 class2 = new c__DisplayClass1();     class2.generator = new Random();     Func func = new Func(class2.b__0); Reflector already contains code to spot this pattern of code and reproduce the form containing the lambda expression, so this is example is correctly decompiled. The use of compiler generated code is even more spectacular in the case of iterators. C# introduced the idea of a method that could automatically store its state between calls, so that it can pick up where it left off. The code can express the logical flow with yield return and yield break denoting places where the method should return a particular value and be prepared to resume.         {             yield return 1;             yield return 2;             yield return 3;         } Of course, there was already a .NET pattern for expressing the idea of returning a sequence of values with the computation proceeding lazily (in the sense that the work for the next value is executed on demand). This is expressed by the IEnumerable interface with its Current property for fetching the current value and the MoveNext method for forcing the computation of the next value. The sequence is terminated when this method returns false. The C# compiler links these two ideas together so that an IEnumerator returning method using the yield keyword causes the compiler to produce the implementation of an Iterator. Take the following piece of code.         IEnumerable GetItems()         {             yield return 1;             yield return 2;             yield return 3;         } The compiler implements this by defining a new class that implements a state machine. This has an integer state that records which yield point we should go to if we are resumed. It also has a field that records the Current value of the enumerator and a field for recording the thread. This latter value is used for optimising the creation of iterator instances. [CompilerGenerated] private sealed class d__0 : IEnumerable, IEnumerable, IEnumerator, IEnumerator, IDisposable {     // Fields     private int 1__state;     private int 2__current;     public Program 4__this;     private int l__initialThreadId; The body gets converted into the code to construct and initialize this new class. private IEnumerable GetItems() {     d__0 d__ = new d__0(-2);     d__.4__this = this;     return d__; } When the class is constructed we set the state, which was passed through as -2 and the current thread. public d__0(int 1__state) {     this.1__state = 1__state;     this.l__initialThreadId = Thread.CurrentThread.ManagedThreadId; } The state needs to be set to 0 to represent a valid enumerator and this is done in the GetEnumerator method which optimises for the usual case where the returned enumerator is only used once. IEnumerator IEnumerable.GetEnumerator() {     if ((Thread.CurrentThread.ManagedThreadId == this.l__initialThreadId)               && (this.1__state == -2))     {         this.1__state = 0;         return this;     } The state machine itself is implemented inside the MoveNext method. private bool MoveNext() {     switch (this.1__state)     {         case 0:             this.1__state = -1;             this.2__current = 1;             this.1__state = 1;             return true;         case 1:             this.1__state = -1;             this.2__current = 2;             this.1__state = 2;             return true;         case 2:             this.1__state = -1;             this.2__current = 3;             this.1__state = 3;             return true;         case 3:             this.1__state = -1;             break;     }     return false; } At each stage, the current value of the state is used to determine how far we got, and then we generate the next value which we return after recording the next state. Finally we return false from the MoveNext to signify the end of the sequence. Of course, that example was really simple. The original method body didn't have any local variables. Any local variables need to live between the calls to MoveNext and so they need to be transformed into fields in much the same way that we did in the case of the lambda expression. More complicated MoveNext methods are required to deal with resources that need to be disposed when the iterator finishes, and sometimes the compiler uses a temporary variable to hold the return value. Why all of this explanation? We've implemented the de-compilation of iterators in the current EAP version of Reflector (7). This contrasts with previous version where all you could do was look at the MoveNext method and try to figure out the control flow. There's a fair amount of things we have to do. We have to spot the use of a CompilerGenerated class which implements the Enumerator pattern. We need to go to the class and figure out the fields corresponding to the local variables. We then need to go to the MoveNext method and try to break it into the various possible states and spot the state transitions. We can then take these pieces and put them back together into an object model that uses yield return to show the transition points. After that Reflector can carry on optimising using its usual optimisations. The pattern matching is currently a little too sensitive to changes in the code generation, and we only do a limited analysis of the MoveNext method to determine use of the compiler generated fields. In some ways, it is a pity that iterators are compiled away and there is no metadata that reflects the original intent. Without it, we are always going to dependent on our knowledge of the compiler's implementation. For example, we have noticed that the Async CTP changes the way that iterators are code generated, so we'll have to do some more work to support that. However, with that warning in place, we seem to do a reasonable job of decompiling the iterators that are built into the framework. Hopefully, the EAP will give us a chance to find examples where we don't spot the pattern correctly or regenerate the wrong code, and we can improve things. Please give it a go, and report any problems.

    Read the article

  • YouTube Scalability Lessons

    - by Bertrand Matthelié
    @font-face { font-family: "Arial"; }@font-face { font-family: "Courier New"; }@font-face { font-family: "Wingdings"; }@font-face { font-family: "Calibri"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }h2 { margin: 12pt 0cm 3pt; page-break-after: avoid; font-size: 14pt; font-family: "Times New Roman"; font-style: italic; }a:link, span.MsoHyperlink { color: blue; text-decoration: underline; }a:visited, span.MsoHyperlinkFollowed { color: purple; text-decoration: underline; }span.Heading2Char { font-family: Calibri; font-weight: bold; font-style: italic; }div.Section1 { page: Section1; }ol { margin-bottom: 0cm; }ul { margin-bottom: 0cm; } Very interesting blog post by Todd Hoff at highscalability.com presenting “7 Years of YouTube Scalability Lessons in 30 min” based on a presentation from Mike Solomon, one of the original engineers at YouTube: …. The key takeaway away of the talk for me was doing a lot with really simple tools. While many teams are moving on to more complex ecosystems, YouTube really does keep it simple. They program primarily in Python, use MySQL as their database, they’ve stuck with Apache, and even new features for such a massive site start as a very simple Python program. That doesn’t mean YouTube doesn’t do cool stuff, they do, but what makes everything work together is more a philosophy or a way of doing things than technological hocus pocus. What made YouTube into one of the world’s largest websites? Read on and see... Stats @font-face { font-family: "Arial"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }div.Section1 { page: Section1; } 4 billion Views a day 60 hours of video is uploaded every minute 350+ million devices are YouTube enabled Revenue double in 2010 The number of videos has gone up 9 orders of magnitude and the number of developers has only gone up two orders of magnitude. 1 million lines of Python code Stack @font-face { font-family: "Arial"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }div.Section1 { page: Section1; } Python - most of the lines of code for YouTube are still in Python. Everytime you watch a YouTube video you are executing a bunch of Python code. Apache - when you think you need to get rid of it, you don’t. Apache is a real rockstar technology at YouTube because they keep it simple. Every request goes through Apache. Linux - the benefit of Linux is there’s always a way to get in and see how your system is behaving. No matter how bad your app is behaving, you can take a look at it with Linux tools like strace and tcpdump. MySQL - is used a lot. When you watch a video you are getting data from MySQL. Sometime it’s used a relational database or a blob store. It’s about tuning and making choices about how you organize your data. Vitess- a  new project released by YouTube, written in Go, it’s a frontend to MySQL. It does a lot of optimization on the fly, it rewrites queries and acts as a proxy. Currently it serves every YouTube database request. It’s RPC based. Zookeeper - a distributed lock server. It’s used for configuration. Really interesting piece of technology. Hard to use correctly so read the manual Wiseguy - a CGI servlet container. Spitfire - a templating system. It has an abstract syntax tree that let’s them do transformations to make things go faster. Serialization formats - no matter which one you use, they are all expensive. Measure. Don’t use pickle. Not a good choice. Found protocol buffers slow. They wrote their own BSON implementation, which is 10-15 time faster than the one you can download. ...Contiues. Read the blog Watch the video

    Read the article

  • How do I cleanly design a central render/animation loop?

    - by mtoast
    I'm learning some graphics programming, and am in the midst of my first such project of any substance. But, I am really struggling at the moment with how to architect it cleanly. Let me explain. To display complicated graphics in my current language of choice (JavaScript -- have you heard of it?), you have to draw graphical content onto a <canvas> element. And to do animation, you must clear the <canvas> after every frame (unless you want previous graphics to remain). Thus, most canvas-related JavaScript demos I've seen have a function like this: function render() { clearCanvas(); // draw stuff here requestAnimationFrame(render); } render, as you may surmise, encapsulates the drawing of a single frame. What a single frame contains at a specific point in time, well... that is determined by the program state. So, in order for my program to do its thing, I just need to look at the state, and decide what to render. Right? Right. But that is more complicated than it seems. My program is called "Critter Clicker". In my program, you see several cute critters bouncing around the screen. Clicking on one of them agitates it, making it bounce around even more. There is also a start screen, which says "Click to start!" prior to the critters being displayed. Here are a few of the objects I'm working with in my program: StartScreenView // represents the start screen CritterTubView // represents the area in which the critters live CritterList // a collection of all the critters Critter // a single critter model CritterView // view of a single critter Nothing too egregious with this, I think. Yet, when I set out to flesh out my render function, I get stuck, because everything I write seems utterly ugly and reminiscent of a certain popular Italian dish. Here are a couple of approaches I've attempted, with my internal thought process included, and unrelated bits excluded for clarity. Approach 1: "It's conditions all the way down" // "I'll just write the program as I think it, one frame at a time." if (assetsLoaded) { if (userClickedToStart) { if (critterTubDisplayed) { if (crittersDisplayed) { forEach(crittersList, function(c) { if (c.wasClickedRecently) { c.getAgitated(); } }); } else { displayCritters(); } } else { displayCritterTub(); } } else { displayStartScreen(); } } That's a very much simplified example. Yet even with only a fraction of all the rendering conditions visible, render is already starting to get out of hand. So, I dispense with that and try another idea: Approach 2: Under the Rug // "Each view object shall be responsible for its own rendering. // "I'll pass each object the program state, and each can render itself." startScreen.render(state); critterTub.render(state); critterList.render(state); In this setup, I've essentially just pushed those crazy nested conditions to a deeper level in the code, hiding them from view. In other words, startScreen.render would check state to see if it needed actually to be drawn or not, and take the correct action. But this seems more like it only solves a code-aesthetic problem. The third and final approach I'm considering that I'll share is the idea that I could invent my own "wheel" to take care of this. I'm envisioning a function that takes a data structure that defines what should happen at any given point in the render call -- revealing the conditions and dependencies as a kind of tree. Approach 3: Mad Scientist renderTree({ phases: ['startScreen', 'critterTub', 'endCredits'], dependencies: { startScreen: ['assetsLoaded'], critterTub: ['startScreenClicked'], critterList ['critterTubDisplayed'] // etc. }, exclusions: { startScreen: ['startScreenClicked'], // etc. } }); That seems kind of cool. I'm not exactly sure how it would actually work, but I can see it being a rather nifty way to express things, especially if I flex some of JavaScript's events. In any case, I'm a little bit stumped because I don't see an obvious way to do this. If you couldn't tell, I'm coming to this from the web development world, and finding that doing animation is a bit more exotic than arranging an MVC application for handling simple requests - responses. What is the clean, established solution to this common-I-would-think problem?

    Read the article

  • SOA Suite Integration: Part 3: Loading files

    - by Anthony Shorten
    One of the most common scenarios in SOA Integration is the loading of a file into the product from an external source. In Oracle SOA Suite there is a File Adapter that can process many file types into your BPEL process. For this example I will use the File Adapter to load a file of user and emails to update the user object within the Oracle Utilities Application Framework. Remember you can repeat this process with other objects and other file types. Again I am illustrating the ease of integration. The first thing is to create an empty BPEL process that will hold our flow. In Oracle JDeveloper this can be achieved by specifying the Define Service Later template (as other templates have predefined inputs and outputs and in this case we want to specify those). So I will create simpleFileLoad process to house our process. You will start with an empty canvas so you need to first specify the load part of the process using the File Adapter. Select the File Adapter from the Component Palette under BPEL Services and drag and drop it to the left side Partner Links (left is input). You name the Service. In this case I chose LoadFile. Press Next. We will define the interface as part of the wizard so select Define from operation and schema (specified later). Press Next. We are going to choose Read File to denote that we will read the file and specify the default Operation Name as Read. Press Next. The next step is to tell the Adapter the location of the files, how to process them and what to do with them after they have been processed. I am using hardcoded locations in this example but you can have logical locations as well. Press Next. I am now going to tell the adapter how to recognize the files I want to load. In my case I am using CSV files and more importantly I am tell the adapter to run the process for each record in the file it encounters. Press Next. Now, I tell the adapter how often I want to poll for the files. I have taken the defaults. Press Next. At this stage I have no explanation of the format of the input. So I am going to invoke the Native Format Wizard which will guide me through the process of creating the file input format. Clicking the purple cog icon will start the wizard. After an introduction screen (not shown), you specify the format of the input file. The File Adapter supports multiple format types. For this example, I will use Delimited as I am going to load a CSV file. Press Next. The best way for the wizard to work is with a sample. I have a sample file and the wizard will ask how much of the file to use as a template. I will use the defaults. Note: If you are using a language that has other languages other than US-ASCII, it is at this point you specify the character set to use.  Press Next. The sample contains multiple instances of a single record type. The wizard supports complex types as well. We will use the appropriate setting for our file. Press Next. You have to specify the file element and the record element. This will be used by the input wizard to translate the CSV data into an XML structure (this will make sense later). I am using LoadUsers as my file delimiter (root element) and User Record as my record root element. Press Next. As the file is CSV the delimiter is "," so I will also specify that the End Of Line (EOL) indicator indicates the end of a record. Press Next. Up until this point your have not given the columns their names. In my case my sample includes the column names in the first record. This is not always the case but you can specify the names and formats of columns in this dialog (not shown). Press Next. The wizard now generates the schema for the input file. You can specify a name for the schema. I have used userupdate.xsd. We want to verify the schema so press Test. You can test the schema by specifying an input sample. and pressing the green play button. You will see the delimiters you specified earlier for the file and the records. Press Ok to continue. A confirmation screen will be displayed showing you the location of the schema in your project. Press Finish to return to the File Adapter configuration. You will now see the schema and elements prepopulated from the wizard. Press Next. The File Adapter configuration is now complete. Press Finish. Now you need to receive the input from the LoadFile component so we need to place a Receive node in the BPEL process by drag and dropping the Receive component from the Component Palette under BPEL Constructs onto the BPEL process. We link the receive process with the LoadFile component by dragging the left most connect node of the Receive node to the LoadFile component. Once the link is established you need to name the Receive node appropriately and as in the post of the last part of this series you need to generate input variables for the BPEL process to hold the input records in. You need to now add the product Web Service. The process is the same as described in the post of the last part of this series. You drop the Web Service BPEL Service onto the right side of the process and fill in the details of the WSDL URL . You also have to add an Invoke node to call the service and generate the input and outputs variables for the call in the Invoke node. Now, to get the inputs from File to the service. You have to use a Transform (you can use an Assign action but a Transform action is more flexible). You drag and drop the Transform component from the Component Palette under Oracle Extensions and place it between the Receive and Invoke nodes. We name the Transform Node, Mapper File and associate the source of the mapping the schema from the Receive node and the output will be the input variable from the Invoke node. We now build the transform. We first map the user and email attributes by drag and drop the elements from the left to the right. The reason we needed to use the transform is that we will be telling the AS-User service that we want to issue an update action. Remember when we registered the service we actually used Read as the default. If we do not otherwise inform the service to use the Update action it will use the Read action instead (which is not desired). To specify the update action you need to click on the transactionType node on the right and select Set Text to set the action. You need to specify the transactionType of UPD (for update). The mapping is now complete. The final BPEL process is ready for deployment. You then deploy the BPEL process to the server and to test the service by simply dropping a file, in the same pattern/name as you specified, in the directory you specified in the File Adapter. You will see each record as a separate instance entry in the Fusion Middleware Control console. You can now load files into the product. You can repeat this process for each type of file to process. While this was a simple example it illustrates the method of loading data can be achieved using SOA Suite in conjunction with our products.

    Read the article

  • D2K to OA Framework Transition

    - by PRajkumar
    What is the difference between D2K form and OA Framework? It is a very innocent but important question for someone that desires to make transition from D2K to OA Framework. I hope you have already read and implemented OA Framework Getting Started. I will re-visit my own experience of implementing HelloWorld program in "OA Framework". When I implemented HelloWorld a year ago, I had no clue as to what I was doing & why I was doing those steps. I merely copied the steps from Oracle Tutorial without understanding them. Hence in this blog, I will try to explain in simple manner the meaning of OA Framework HelloWorld Program and compare the steps to D2K form [where possible]. To keep things simple, only basics will be discussed. Following key Steps were needed for HelloWorld Step 1 Create a new Workspace and a new Project as dictated by Oracle's tutorial. When defining project, you will specify a default package, which in this case was oracle.apps.ak.hello This means the following: - ak is the short name of the Application in Oracle           [means fnd_applications.short_name] hello is the name of your project Step 2 Next, you will create a OA Page within hello project Think OA Page as the fmx file itself in D2K. I am saying so because this page gets attached to the form function. This page will be created within hello project, hence the package name oracle.apps.ak.hello.webui Note the webui, it is a convention to have page in webui, means this page represents the Web User Interface You will assign the default AM [OAApplicationModule]. Think of AM "Connection Manager" and "Transaction State Manager" for your page          I can't co-relate this to anything in D2k, as there is no concept of Connection Pooling and that D2k is not stateless. Reason being that as soon as you kick off a D2K Form, it connects to a single session of Oracle and sticks to that single Oracle database session. So is not the case in OAF, hence AM is needed. Step 3 You create Region within the Page. ·         Region is what will store your fields. Text input fields will be of type messageTextInput. Think of Canvas in D2K. You can have nested regions. Stacked Canvas in D2K comes the closest to this component of OA Framework Step 4 Add a button to one of the nested regions The itemStyle should be submitButton, in case you want the page to be submitted when this button is clicked There is no WHEN-BUTTON-PRESSED trigger in OAF. In Framework, you will add a controller java code to handle events like Form Submit button clicks. JDeveloper generates the default code for you. Primarily two functions [should I call methods] will be created processRequest [for UI Rendering Handling] and processFormRequest          Think of processRequest as WHEN-NEW-FORM-INSTANCE, though processRequest is very restrictive. Note What is the difference between processRequest and processFormRequest? These two methods are available in the Default Controller class that gets created. processFormRequest This method is commonly used to react/respond to the event that has taken place, for example click of a button. Some examples are if(oapagecontext.getParameter("Cancel") != null) (Do your processing for Cancellation/ Rollback) if(oapagecontext.getParameter("Submit") != null) (Do your validations and commit here) if(oapagecontext.getParameter("Update") != null) (Do your validations and commit here) In the above three examples, you could be calling oapagecontext.forwardImmediately to re-direct the page navigation to some other page if needed. processRequest In this method, usually page rendering related code is written. Effectively, each GUI component is a bean that gets initialised during processRequest. Those who are familiar with D2K forms, something like pre-query may be written in this method. Step 5 In the controller to access the value in field "HelloName" the command is String userContent = pageContext.getParameter("HelloName"); In D2k, we used :block.field. In OAFramework, at submission of page, all the field values get passed into to OAPageContext object. Use getParameter to access the field value To set the value of the field, use OAMessageTextInputBean field HelloName = (OAMessageTextInputBean)webBean.findChildRecursive("HelloName"); fieldHelloName.setText(pageContext,"Setting the default value" ); Note when setting field value in controller: Note 1. Do not set the value in processFormRequest Note 2. If the field comes from View Object, then do not use setText in controller Note 3. For control fields [that are not based on View Objects], you can use setText to assign values in processRequest method Lets take some notes to expand beyond the HelloWorld Project Note 1 In D2K-forms we sort of created a Window, attached to Canvas, and then fields within that Canvas. However in OA Framework, think of Page being fmx/Window, think of Region being a Canvas, and fields being within Regions. This is not a formal/accurate understanding of analogy between D2k and Framework, but is close to being logical. Note 2 In D2k, your Forms fmb file was compiled to fmx. It was fmx file that was deployed on mid-tier. In case of OAF, your OA Page is nothing but a XML file. We call this MDS [meta data]. Whatever name you give to "Page" in OAF, an XML file of the same name gets created. This xml file must then be loaded into database by using XML Importer command. Note 3 Apart from MDS XML file, almost everything else is merely deployed to your mid-tier. Usually this is underneath $JAVA_TOP/oracle/apps/../.. All java files will go underneath java top/oracle/apps/../.. etc. Note 4 When building tutorial, ignore the steps for setting "Attribute Sets". These are not mandatory. Oracle might just have developed their tutorials without including these. Think of these like Visual Attributes of D2K forms Note 5 Controller is where you will write any java code in OA Framework. You can create a Controller per Page or have a different Controller for each of the Regions with the same Page. Note 6 In the method processFormRequest of the Controller, you can access the values of the page by using notation pageContext.getParameter("<fieldname here>"). This method processFormRequest is executed when the OAF Screen/Page is submitted by click of a button. Note 7 Inside the controller, all the Database Related interactions for example interaction with View Objects happen via Application Module. But why so? Because Application Module Manages the transaction state of the Application. OAApplicationModuleImpl oaapplicationmoduleimpl = OAApplicationModuleImpl)oapagecontext.getApplicationModule(oawebbean); OADBTransaction oadbtransaction = OADBTransaction)oaapplicationmoduleimpl.getDBTransaction(); Note 8 In D2K, we have control block or a block based on database view. Similarly, in OA Framework, if the field does not have view Object attached, then it is like a control field. Hence in HelloWorld example, field HelloName is a control field [in D2K terminology]. A view Object can either be based on a view/table, synonym or on a SQL statement. Note 9 I wish to access the fields in multi record block that is based on view Object. Can I do this in Controller? Sure you can. To traverse through those records, do the below ·         Get the reference to the View Object using (OAViewObject)oapagecontext.getApplicationModule(oawebbean).findViewObject("VO Name Here") ·         Loop through the records in View Objects using count returned from oaviewobject.getFetchedRowCount() ·         For each record, fetch the value of the fields within the loop as oracle.jbo.Row row = oaviewobject.getRowAtRangeIndex(loop index here); (String)row.getAttribute("Column name of VO here ");

    Read the article

  • laptop crashed: why?

    - by sds
    my linux (ubuntu 12.04) laptop crashed, and I am trying to figure out why. # last sds pts/4 :0 Tue Sep 4 10:01 still logged in sds pts/3 :0 Tue Sep 4 10:00 still logged in reboot system boot 3.2.0-29-generic Tue Sep 4 09:43 - 11:23 (01:40) sds pts/8 :0 Mon Sep 3 14:23 - crash (19:19) this seems to indicate a crash at 09:42 (= 14:23+19:19). as per another question, I looked at /var/log: auth.log: Sep 4 09:17:02 t520sds CRON[32744]: pam_unix(cron:session): session closed for user root Sep 4 09:43:17 t520sds lightdm: pam_unix(lightdm:session): session opened for user lightdm by (uid=0) no messages file syslog: Sep 4 09:24:19 t520sds kernel: [219104.819975] CPU0: Package power limit normal Sep 4 09:43:16 t520sds kernel: imklog 5.8.6, log source = /proc/kmsg started. kern.log: Sep 4 09:24:19 t520sds kernel: [219104.819969] CPU1: Package power limit normal Sep 4 09:24:19 t520sds kernel: [219104.819971] CPU2: Package power limit normal Sep 4 09:24:19 t520sds kernel: [219104.819974] CPU3: Package power limit normal Sep 4 09:24:19 t520sds kernel: [219104.819975] CPU0: Package power limit normal Sep 4 09:43:16 t520sds kernel: imklog 5.8.6, log source = /proc/kmsg started. Sep 4 09:43:16 t520sds kernel: [ 0.000000] Initializing cgroup subsys cpuset Sep 4 09:43:16 t520sds kernel: [ 0.000000] Initializing cgroup subsys cpu I had a computation running until 9:24, but the system crashed 18 minutes later! kern.log has many pages of these: Sep 4 09:43:16 t520sds kernel: [ 0.000000] total RAM covered: 8086M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 128K num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 256K num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 512K num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 1M num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 8M num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] *BAD*gran_size: 64K chunk_size: 32M num_reg: 10 lose cover RAM: -16M Sep 4 09:43:16 t520sds kernel: [ 0.000000] *BAD*gran_size: 64K chunk_size: 64M num_reg: 10 lose cover RAM: -16M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 10 lose cover RAM: 0G Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 256M num_reg: 10 lose cover RAM: 0G Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 512M num_reg: 10 lose cover RAM: 0G Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 10 lose cover RAM: 0G Sep 4 09:43:16 t520sds kernel: [ 0.000000] *BAD*gran_size: 64K chunk_size: 2G num_reg: 10 lose cover RAM: -1G does this mean that my RAM is bad?! it also says Sep 4 09:43:16 t520sds kernel: [ 2.944123] EXT4-fs (sda1): INFO: recovery required on readonly filesystem Sep 4 09:43:16 t520sds kernel: [ 2.944126] EXT4-fs (sda1): write access will be enabled during recovery Sep 4 09:43:16 t520sds kernel: [ 3.088001] firewire_core: created device fw0: GUID f0def1ff8fbd7dff, S400 Sep 4 09:43:16 t520sds kernel: [ 8.929243] EXT4-fs (sda1): orphan cleanup on readonly fs Sep 4 09:43:16 t520sds kernel: [ 8.929249] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 658984 ... Sep 4 09:43:16 t520sds kernel: [ 9.343266] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 525343 Sep 4 09:43:16 t520sds kernel: [ 9.343270] EXT4-fs (sda1): 56 orphan inodes deleted Sep 4 09:43:16 t520sds kernel: [ 9.343271] EXT4-fs (sda1): recovery complete Sep 4 09:43:16 t520sds kernel: [ 9.645799] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) does this mean my HD is bad? As per FaultyHardware, I tried smartctl -l selftest, which uncovered no errors: smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-30-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Momentus 7200.4 Device Model: ST9500420AS Serial Number: 5VJE81YK LU WWN Device Id: 5 000c50 0440defe3 Firmware Version: 0003LVM1 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Mon Sep 10 16:40:04 2012 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 109) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103b) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 117 099 034 Pre-fail Always - 162843537 3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 571 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 069 060 030 Pre-fail Always - 17210154023 9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 174362787320258 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 571 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 1 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 061 043 045 Old_age Always In_the_past 39 (0 11 44 26) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 84 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 20 193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 2434 194 Temperature_Celsius 0x0022 039 057 000 Old_age Always - 39 (0 15 0 0) 195 Hardware_ECC_Recovered 0x001a 041 041 000 Old_age Always - 162843537 196 Reallocated_Event_Count 0x000f 095 095 030 Pre-fail Always - 4540 (61955, 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 4545 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Googling for the messages proved inconclusive, I can't even figure out whether the messages are routine or catastrophic. So, what do I do now?

    Read the article

< Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >