Search Results

Search found 6715 results on 269 pages for 'preg match'.

Page 225/269 | < Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232  | Next Page >

• How to improve efficiency in loops?

  - by Jacob Worldly

  I have the following code, which translates the input string into morse code. My code runs through every letter in the string and then through every character in the alphabet. This is very inefficient, because what if I was reading from a very large file, instead of a small alphabet string. Is there any way that I could improve my code, Maybe using the module re, to match my string with the morse code characters? morse_alphabet = ".- -... -.-. -.. . ..-. --. .... .. .--- -.- .-.. -- -. --- .--. --.- .-. ... - ..- ...- .-- -..- -.-- --.." ALPHABET = "abcdefghijklmnopqrstuvwxyz" morse_letters = morse_alphabet.split(" ") result = [] count_character = 0 def t(code): for character in code: count_letter = 0 for letter in ALPHABET: lower_character = code[count_character].lower() lower_letter = letter.lower() if lower_character == lower_letter: result.append(morse_letters[count_letter]) count_letter += 1 count_character += 1 return result

  Read the article

• Spring MVC: How to get the remaining path after the controller path?

  - by Willis Blackburn

  I've spent over an hour trying to find the answer to this question, which seems like it should reflect a common use case, but I can't figure it out! Basically I am writing a file-serving controller using Spring MVC. The URLs are of the format http://www.bighost.com/serve/the/path/to/the/file.jpg, in which the part after "/serve" is the path to the requested file, which may have an arbitrary number of path segments. I have a controller like this: @Controller class ServerController { @RequestMapping(value = "/serve/???") public void serve(???) { } } What I am trying to figure out is: What do I use in place of "???" to make this work? I have two theories about how this should work. The first theory is that I could replace the first "???" in the RequestMapping with a path variable placeholder that has some special syntax meaning "capture to the end of the path." If a regular placeholder looks like "{path}" then maybe I could use "{path:**}" or "{path:/}" or something like that. Then I could use a @PathVariable annotation to refer to the path variable in the second "???". The other theory is that I could replace the first "???" with "**" (match anything) and that Spring would give me an API to obtain the remainder of the path (the part matching the "**"). But I can't find such an API. Thanks for any help you can provide!

  Read the article

• CSS - vertical align text where text can be multiple lines

  - by Sniffer

  Hi all I've been given a design by a graphic designer, which I'm trying to put into HTML and CSS. One of the issues I'm facing is on a user input form. In the design the labels for each input are a fixed width - say 100px. The container for each label/input pair is fixed at 2em. The design I've been given has asked that the text for each label is vertically aligned. So the structure is like this: <containerTag> <label /> <input /> </containerTag> No problems as long as the text is on one line (I would have just used line-height of 2em to match the container), but some of the text in the labels are wrapping to two or even lines. Is there a semantic and nice way to get around this problem? I need something that will work in IE6-9, Firefox 3.5+, Chrome and Safari. Although I am using progressive enhancement, so if there is a solution that will only work on the later browsers, but won't break the older ones, then this would be acceptable. Any help gratefully received! Thanks for your time S

  Read the article

• Speed up an Excel Macro?

  - by N. Lucas

  Right now I have a macro PopulateYearlyValues But it seems to me it's taking way too long Sub PopulateYearlyValues(ByVal Month As Range) Dim c As Double Dim s As Double c = Application.WorksheetFunction.Match(UCase(Month.Value), ActiveSheet.Range("AA5:AX5"), 0) s = (ActiveSheet.Range("AA5").Column - 1) With ActiveSheet Dim i As Integer Dim j As Integer For i = 7 To 44 .Range("G" & i).Value = 0 .Range("H" & i).Value = 0 For j = 1 To c .Range("G" & i).Value = (.Range("G" & i).Value + .Cells(i, s).Offset(0, j)) .Range("H" & i).Value = (.Range("H" & i).Value + .Cells(i, s).Offset(0, (j + 1))) j = j + 1 Next j Next i End With End Sub I have a range G7:H44 that needs to be populated with the SUM of range AA7:AX44 but.. it's only every other column: If Month.Value = "January" G7 = SUM(AA7) H7 = SUM(AB7) ... G44 = SUM(AA44) H44 = SUM(AB44) End If If Month.Value = "April" G7 = SUM(AA7, AC7, AE7, AG7) H7 = SUM(AB7, AD7, AF7, AH7) ... G44 = SUM(AA44, AC44, AE44, AG44) H44 = SUM(AB44, AD44, AF44, AH44) End If But the macro I have is taking way too long.. Is there any other way to do this?

  Read the article

• Error in merging two sequences of timestamps to yield strings

  - by AruniRC

  The code sorts two input sequences - seq01 and seq02 - on the basis of their timestamp values and returns a sequence that denotes which sequence is to be read for the values to be in order. For cases where seq02's timestamp value is lesser than seq01's timestamp value we yield a "2" to the sequence being returned, else a "1". These denote whether at that point seq01 is to be taken or seq02 is to be taken for the data to be in order (by timestamp value). let mergeSeq (seq01:seq<_>) (seq02:seq<_>) = seq { use iter01 = seq01.GetEnumerator() use iter02 = seq02.GetEnumerator() while iter01.MoveNext() do let _,_,time01 = iter01.Current let _,_,time02 = iter02.Current while time02 < time01 && iter02.MoveNext() do yield "2" yield "1" } To test it in the FSI created two sequences a and b, a={1;3;5;...} and b={0;2;4;...}. So the expected values for let c = mergeSeq a b would have been {"2","1","2","1"...}. However I am getting this error: error FS0001: The type ''a * 'b * 'c' does not match the type 'int' EDIT After correcting: let mergeSeq (seq01:seq<_>) (seq02:seq<_>) = seq { use iter01 = seq01.GetEnumerator() use iter02 = seq02.GetEnumerator() while iter01.MoveNext() do let time01 = iter01.Current let time02 = iter02.Current while time02 < time01 && iter02.MoveNext() do yield "2" yield "1" } After running this, there's another error: call MoveNext. Somehow the iteration is not being performed.

  Read the article

• xsl:for-each not supported in this context

  - by alexbf

  Hi! I have this XSLT document : <xsl:stylesheet version="1.0" xmlns:mstns="http://www.w3.org/2001/XMLSchema" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/> <xsl:template match="/MyDocRootElement"> <xs:schema id="DataSet" targetNamespace="http://www.w3.org/2001/XMLSchema" attributeFormDefault="qualified" elementFormDefault="qualified" > <xs:element name="DataSet" msdata:IsDataSet="true"> <xs:complexType> <xs:choice maxOccurs="unbounded"> <xs:element name="Somename"> </xs:element> <xs:element name="OtherName"> </xs:element> <!-- FOR EACH NOT SUPPORTED? --> <xsl:for-each select="OtherElements/SubElement"> <xs:element name="OtherName"> </xs:element> </xsl:for-each> </xs:choice> </xs:complexType> </xs:element> </xs:schema> </xsl:template> </xsl:stylesheet> I have a validation error saying that the "for-each element is not supported in this context" I am guessing it has something to do with the xs namespace validation. Any ideas on how can I make this work? (Exclude validation?) Thanks Alex

  Read the article

• WSDL first for existing service layer

  - by Jurgen H

  I am working on an existing Java project with a typical services - dao setup for which only a webapplication was available. My job is to add webservices on top of the services layer, but the webservices have their own functional analysis and datamodel. The functional analyses ofcource focuses on what is possible in the different service methods. As good practice demands, we used the WSDL first strategy and generated JAXB bound Java classes and a SEI for the webservices. After having implemented the webservices partially, we noticed a 70% match between the datamodel. This resulted in writing converters which take the webservice JAXB classes and map them with the service layer classes. Customer customer = new Customer(); customer.setName(wsCustomer.getName()); customer.setFirstName(wsCustomer.getFirstName(); .. This is a very obvious example, some other mappings where little more complicated. Can anyone give his best practices, experiences, solutions to this kind of situations? Are any of these frameworks usefull? http://transmorph.sourceforge.net/wiki/index.php/Main_Page http://ezmorph.sourceforge.net/ Please don't start a discussion about WSDL first vs code first.

  Read the article

• Stored Procedure: Reducing Table Data

  - by SumGuy

  Hi Guys, A simple question about Stored Procedures. I have one stored procedure collecting a whole bunch of data in a table. I then call this procedure from within another stored procedure. I can copy the data into a new table created in the calling procedure but as far as I can see the tables have to be identical. Is this right? Or is there a way to insert only the data I want? For example.... I have one procedure which returns this: SELECT @batch as Batch, @Count as Qty, pd.Location, cast(pd.GL as decimal(10,3)) as [Length], cast(pd.GW as decimal(10,3)) as Width, cast(pd.GT as decimal(10,3)) as Thickness FROM propertydata pd GROUP BY pd.Location, pd.GL, pd.GW, pd.GT I then call this procedure but only want the following data: DECLARE @BatchTable TABLE ( Batch varchar(50), [Length] decimal(10,3), Width decimal(10,3), Thickness decimal(10,3), ) INSERT @BatchTable (Batch, [Length], Width, Thickness) EXEC dbo.batch_drawings_NEW @batch So in the second command I don't want the Qty and Location values. However the code above keeps returning the error: "Insert Error: Column name or number of supplied values does not match table"

  Read the article

• Invalid quantifer error using Regular Expression (UK Telephone numbers)

  - by Matt

  HI all, as per the title I am getting the error "Invalid Quantifier" Trying to match this reg ex:- ^(((+44\s?\d{4}|(?0\d{4})?)\s?\d{3}\s?\d{3})|((+44\s?\d{3}|(?0\d{3})?)\s?\d{3}\s?\d{4})|((+44\s?\d{2}|(?0\d{2})?)\s?\d{4}\s?\d{4}))(\s?#(\d{4}|\d{3}))?$ Infact ive tried a few UK telephone number regex's from the regex librairy but im getting the same error all the time. If anyone can help id be much appreciative! Just for info, im using the jQuery form validation librairy, and here is my code: - $(document).ready(function(){ //Set Fields to be validated $("#EventForm").validate(); $( "#StartDate" ).datepicker(); $( "#EndDate" ).datepicker(); //Add Postcode Regex Method to Validator Function $.validator.addMethod( "postcode", function(value, element, regexp) { var check = false; var re = new RegExp(regexp); return this.optional(element) || re.test(value); }, "Please enter a valid postcode." ); //Add UK Telephone number Regex Method to Validator Function $.validator.addMethod( "telephone", function(value, element, regexp) { var check = false; var re = new RegExp(regexp); return this.optional(element) || re.test(value); }, "Please enter a valid UK telephone number in the format - 01856 666666." ); //Add Postcode Regular Expression Rule to Postcode Field $("#EventPostcode").rules("add", { postcode: "^([a-zA-Z]){1}([0-9][0-9]|[0-9]|[a-zA-Z][0-9][a-zA-Z]|[a-zA-Z][0-9][0-9]|[a-zA-Z][0-9]){1}([ ])([0-9][a-zA-z][a-zA-z]){1}$"}); $("#EventTelephoneNo").rules("add", { telephone: "^(((\+44\s?\d{4}|\(?0\d{4}\)?)\s?\d{3}\s?\d{3})|((\+44\s?\d{3}|\(?0\d{3}\)?)\s?\d{3}\s?\d{4})|((\+44\s?\d{2}|\(?0\d{2}\)?)\s?\d{4}\s?\d{4}))(\s?\#(\d{4}|\d{3}))?$"}); }); Many thanks

  Read the article

• Solving for the coefficent of linear equations with one known coefficent

  - by CppLearner

  clc; clear all; syms y a2 a3 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % [ 0.5 0.25 0.125 ] [ a2 ] [ y ] % [ 1 1 1 ] [ a3 ] = [ 3 ] % [ 2 4 8 ] [ 6 ] [ 2 ] %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% M = [0.5 0.25 0.125; 1 1 1; 2 4 8]; t = [a2 a3 6]; r = [y 3 2]; sol = M * t' s1 = solve(sol(1), a2) % solve for a2 s2 = solve(sol(2), a3) % solve for a3 This is what I have so far. These are my output sol = conj(a2)/2 + conj(a3)/4 + 3/4 conj(a2) + conj(a3) + 6 2*conj(a2) + 4*conj(a3) + 48 s1 = - conj(a3)/2 - 3/2 - Im(a3)*i s2 = - conj(a2) - 6 - 2*Im(a2)*i sol looks like what we would have if we put them back into equation form: 0.5 * a2 + 0.25 * a3 + 0.125 * a4 a2 + a3 + a4 = 3 2*a2 + 4*a3 + 8*a4 = 2 where a4 is known == 6. My problem is, I am stuck with how to use solve to actually solve these equations to get the values of a2 and a3. s2 solve for a3 but it doesn't match what we have on paper (not quite). a2 + a3 + 6 = 3 should yield a3 = -3 - a2. because of the imaginary. Somehow I need to equate the vector solution sol to the values [y 3 2] for each row.

  Read the article

• font-size/font-family has no effect

  - by kman

  This is a related issue to my previous question. I have modified the code suggested for preface headings to modify the p tags underneath the headings. <xsl:template match="topic[title='Preface']/body/section/p"> <fo:block xsl:use-attribute-sets="preface.p"> <xsl:apply-imports/> </fo:block> </xsl:template> <xsl:attribute-set name="preface.p"> <xsl:attribute name="font-family">Helvetica</xsl:attribute> <xsl:attribute name="color">red</xsl:attribute> <xsl:attribute name="font-size">8pt</xsl:attribute> </xsl:attribute-set> The color changes the desired text - and only the desired text, so I know it is grabbing the correct nodes. However, the font family and size have no effect. Does anyone know of anything I can check that might be over-riding the code?

  Read the article

• How to Map Two Tables To One Class in Fluent NHibernate

  - by Richard Nagle

  I am having a problem with fluent nhiberbate mapping two tables to one class. I have the following database schema: TABLE dbo.LocationName ( LocationId INT PRIMARY KEY, LanguageId INT PRIMARY KEY, Name VARCHAR(200) ) TABLE dbo.Language ( LanguageId INT PRIMARY KEY, Locale CHAR(5) ) And want to build the following class definition: public class LocationName { public virtual int LocationId { get; private set; } public virtual int LanguageId { get; private set; } public virtual string Name { get; set; } public virtual string Locale { get; set; } } Here is my mapping class: public LocalisedNameMap() { WithTable("LocationName"); UseCompositeId() .WithKeyProperty(x => x.LanguageId) .WithKeyProperty(x => x.LocationId); Map(x => x.Name); WithTable("Language", lang => { lang.WithKeyColumn("LanguageId"); lang.Map(x => x.Locale); }); } The problem is with the mapping of the Locale field being from another table, and in particular that the keys between those tables don't match. Whenever I run the application with this mapping I get the following error on startup: Foreign key (FK7FC009CCEEA10EEE:Language [LanguageId])) must have same number of columns as the referenced primary key (LocationName [LanguageId, LocationId]) How do I tell nHibernate to map from LocationName to Language using only the LanguageId field?

  Read the article

• Universal oAuth for objective-c class?

  - by phpnerd211

  I have an app that connects to 6+ social networks via APIs. What I want to do is transfer over my oAuth calls to call directly from the phone (not from the server). Here's what I have (for tumblr): // Set some variables NSString *consumerKey = CONSUMER_KEY_HERE; NSString *sharedSecret = SHARED_SECRET_HERE; NSString *callToURL = @"https://tumblr.com/oauth/access_token"; NSString *thePassword = PASSWORD_HERE; NSString *theUsername = USERNAME_HERE; // Calculate nonce & timestamp NSString *nonce = [[NSString stringWithFormat:@"%d", arc4random()] retain]; time_t t; time(&t); mktime(gmtime(&t)); NSString *timestamp = [[NSString stringWithFormat:@"%d", (int)(((float)([[NSDate date] timeIntervalSince1970])) + 0.5)] retain]; // Generate signature NSString *baseString = [NSString stringWithFormat:@"GET&%@&%@",[callToURL urlEncode],[[NSString stringWithFormat:@"oauth_consumer_key=%@&oauth_nonce=%@&oauth_signature_method=HMAC-SHA1&oauth_timestamp=%@&oauth_version=1.0&x_auth_mode=client_auth&x_auth_password=%@&x_auth_username=%@",consumerKey,nonce,timestamp,thePassword,theUsername] urlEncode]]; NSLog(@"baseString: %@",baseString); const char *cKey = [sharedSecret cStringUsingEncoding:NSASCIIStringEncoding]; const char *cData = [baseString cStringUsingEncoding:NSASCIIStringEncoding]; unsigned char cHMAC[CC_SHA256_DIGEST_LENGTH]; CCHmac(kCCHmacAlgSHA256, cKey, strlen(cKey), cData, strlen(cData), cHMAC); NSData *HMAC = [[NSData alloc] initWithBytes:cHMAC length:sizeof(cHMAC)]; NSString *signature = [HMAC base64EncodedString]; NSString *theUrl = [NSString stringWithFormat:@"%@?oauth_consumer_key=%@&oauth_nonce=%@&oauth_signature=%@&oauth_signature_method=HMAC-SHA1&oauth_timestamp=%@&oauth_version=1.0&x_auth_mode=client_auth&x_auth_password=%@&x_auth_username=%@",callToURL,consumerKey,nonce,signature,timestamp,thePassword,theUsername]; From tumblr, I get this error: oauth_signature does not match expected value I've done some forum scouring, and no oAuth for objective-c classes worked for what I want to do. I also don't want to have to download and implement 6+ social API classes into my project and do it that way.

  Read the article

• Linking Apache to Tomcat with multiple domains.

  - by Royce Thigpen

  Okay, so I've been working for a while on this, and have been searching, but so far I have not found any answers that actually answer what I want to know. I'm a little bit at the end of my rope with this one, but I'm hoping I can figure this out sometime soon. So I have Apache 2 installed and serving up standard webpages, but I also have that linked to a Tomcat instance for one of my domains currently supported. However, I want to add another domain to the server via Apache that points to a separate code base from the one I already have. I have been coming at this from several different angles, and I have determined that I just don't know enough about setting up these servers to really do what I want to do. Little information on my server: Currently running a single Tomcat5.5 instance with Apache 2, using mod_jk to connect them together. I have a worker in workers.properties that points it's "host" field to "localhost" with the correct port my Tomcat instance, so that all works. In my Tomcat server.xml file, I have a host defined as "localhost" that points at my webapp that I am currently serving up, with that host set as the defaultHost as well. One thought I had was that I could add a new worker with a different host than "localhost" (i.e. host2) and then define a new host in my server.xml file called "host2" to match it, but after reading around some on the internet, It seems the "host" of the worker must point to a server, and not a hostname in the Tomcat instance, is this correct? Again, a simple rundown of what I want: Setup in apache/tomcat combo such that www.domain1.com points at "webapp1" and www.domain2.com points at "webapp2".

  Read the article

• re.sub emptying list

  - by jmau5

  def process_dialect_translation_rules(): # Read in lines from the text file specified in sys.argv[1], stripping away # excess whitespace and discarding comments (lines that start with '##'). f_lines = [line.strip() for line in open(sys.argv[1], 'r').readlines()] f_lines = filter(lambda line: not re.match(r'##', line), f_lines) # Remove any occurances of the pattern '\s*<=>\s*'. This leaves us with a # list of lists. Each 2nd level list has two elements: the value to be # translated from and the value to be translated to. Use the sub function # from the re module to get rid of those pesky asterisks. f_lines = [re.split(r'\s*<=>\s*', line) for line in f_lines] f_lines = [re.sub(r'"', '', elem) for elem in line for line in f_lines] This function should take the lines from a file and perform some operations on the lines, such as removing any lines that begin with ##. Another operation that I wish to perform is to remove the quotation marks around the words in the line. However, when the final line of this script runs, f_lines becomes an empty lines. What happened? Requested lines of original file: ## English-Geek Reversible Translation File #1 ## (Moderate Geek) ## Created by Todd WAreham, October 2009 "TV show" <=> "STAR TREK" "food" <=> "pizza" "drink" <=> "Red Bull" "computer" <=> "TRS 80" "girlfriend" <=> "significant other"

  Read the article

• How to work with CTE. There is some error related to anchor.

  - by Shantanu Gupta

  I am creating a hierarchy representaion of a column. But an error occurs Details are Msg 240, Level 16, State 1, Line 1 Types don't match between the anchor and the recursive part in column "DISPLAY" of recursive query "CTE". I know there is some typecasting error. But I dont know how to remove error. Please just dont only sort out my error. I need explanation why this error is coming. When this error occurs. I am trying to sort table on the basis of sort col that i m introducing. I want to add '-' at every level and want to sort accordingly. Please help WITH CTE (PK_CATEGORY_ID, [DESCRIPTION], FK_CATEGORY_ID, DISPLAY, SORT, DEPTH) AS ( SELECT PK_CATEGORY_ID, [DESCRIPTION], FK_CATEGORY_ID, '-' AS DISPLAY, '--' AS SORT, 0 AS DEPTH FROM dbo.L_CATEGORY_TYPE WHERE FK_CATEGORY_ID IS NULL UNION ALL SELECT T.PK_CATEGORY_ID, T.[DESCRIPTION], T.FK_CATEGORY_ID, CAST(DISPLAY+T.[DESCRIPTION] AS VARCHAR(1000)), '--' AS SORT, C.DEPTH +1 FROM dbo.L_CATEGORY_TYPE T JOIN CTE C ON C.PK_CATEGORY_ID = T.FK_CATEGORY_ID --SELECT T.PK_CATEGORY_ID, C.SORT+T.[DESCRIPTION], T.FK_CATEGORY_ID --, CAST('--' + C.SORT AS VARCHAR(1000)) AS SORT, CAST(DEPTH +1 AS INT) AS DEPTH --FROM dbo.L_CATEGORY_TYPE T JOIN CTE C ON C.FK_CATEGORY_ID = T.PK_CATEGORY_ID ) SELECT PK_CATEGORY_ID, [DESCRIPTION], FK_CATEGORY_ID, DISPLAY, SORT, DEPTH FROM CTE ORDER BY SORT

  Read the article

• does entity framework or mysql provider swallows timeout exceptions on enumeration of result?!

  - by Freddy Rios

  I'm trying to make sense of a situation I have using entity framework on .net 3.5 sp1 + MySQL 6.1.2.0 as the provider. It involves the following code: Response.Write("Products: " + plist.Count() + "<br />"); var total = 0; foreach (var p in plist) { //... some actions total++; //... other actions } Response.Write("Total Products Checked: " + total + "<br />"); Basically the total products is varying on each run, and it isn't matching the full total in plist. Its varies widely, from ~ 1/5th to half. There isn't any control flow code inside the foreach i.e. no break, continue, try/catch, conditions around total++, anything that could affect the count. As confirmation, there are other totals captured inside the loop related to the actions, and those match the lower and higher total runs. I don't find any reason to the above, other than something in entity framework or the mysql provider that causes it to end the foreach when retrieving an item. The body of the foreach can have some good variation in time, as the actions involve file & network access, my best shot at the time is that when it takes beyond certain threshold there is some type of timeout in the underlying framework/provider and instead of causing an exception it is silently reporting no more items for enumeration. Can anyone give some light in the above scenario and/or confirm if the entity framework/mysql provider has the above behavior?

  Read the article

• Help with interesting VS2010 and SQL2008 bug

  - by user355770

  Hey So im using Visual Studio 2010 to create a webpage. im calling some tabels from sql server 2008 here is where im confused... The code runs fine no errors. The pages works except im missing my rows in my 3rd column from the table. Everything else shows up. Ive checked to make sure the names are matching everywhere and that in sql the joins and such worked. Its just very weird that i'd be missing my 2 rows from the 3rd column. anyone have any ideas to help?? the error is in the tab called research material else if (tabTagId == "tpArlington_ProjectInformation") { repArlington_ProjectInformation.DataSource = ds; repArlington_ProjectInformation.DataBind(); } else if (tabTagId == "tpArlington_Plan") { repArlington_Plan.DataSource = ds; repArlington_Plan.DataBind(); } else if (tabTagId == "tpArlington_ResearchMaterial") { repArlington_ResearchMaterial.DataSource = ds; repArlington_ResearchMaterial.DataBind(); } else if (Session["projectAbbreviation"].ToString() == "ARLING") { tpArlington_ProjectInformation.HeaderText = "Project Information"; tpArlington_ProjectInformation.Visible = true; tpArlington_Plan.HeaderText = "Plan"; tpArlington_Plan.Visible = true; tpArlington_ResearchMaterial.HeaderText = "ResearchMaterial"; tpArlington_ResearchMaterial.Visible = true; getTabData("tpArlington_ProjectInformation"); getTabData("tpArlington_Plan"); getTabData("tpArlington_ReasearchMaterial"); } the 2 other tabs work perfect. the research material is where the problem is. the stuff in the tab doesn't come up. the text in the tab DOES come up but not the stuff from sql. the stuff in sql looks good, the ids match and everything is joined properly otherwise the other 2 tabs wouldnt work. that is what is confusing me. any suggestions or specific info you need just ask. thanks!

  Read the article

• What's the use of writing tests matching configuration-like code line by line?

  - by Pascal Van Hecke

  Hi, I have been wondering about the usefulness of writing tests that match code one-by-one. Just an example: in Rails, you can define 7 restful routes in one line in routes.rb using: resources :products BDD/TDD proscribes you test first and then write code. In order to test the full effect of this line, devs come up with macros e.g. for shoulda: http://kconrails.com/2010/01/27/route-testing-with-shoulda-in-ruby-on-rails/ class RoutingTest < ActionController::TestCase # simple should_map_resources :products end I'm not trying to pick on the guy that wrote the macros, this is just an example of a pattern that I see all over Rails. I'm just wondering what the use of it is... in the end you're just duplicating code and the only thing you test is that Rails works. You could as well write a tool that transforms your test macros into actual code... When I ask around, people answer me that: "the tests should document your code, so yes it makes sense to write them, even if it's just one line corresponding to one line" What are your thoughts?

  Read the article

• Appropriate uses of Monad `fail` vs. MonadPlus `mzero`

  - by jberryman

  This is a question that has come up several times for me in the design code, especially libraries. There seems to be some interest in it so I thought it might make a good community wiki. The fail method in Monad is considered by some to be a wart; a somewhat arbitrary addition to the class that does not come from the original category theory. But of course in the current state of things, many Monad types have logical and useful fail instances. The MonadPlus class is a sub-class of Monad that provides an mzero method which logically encapsulates the idea of failure in a monad. So a library designer who wants to write some monadic code that does some sort of failure handling can choose to make his code use the fail method in Monad or restrict his code to the MonadPlus class, just so that he can feel good about using mzero, even though he doesn't care about the monoidal combining mplus operation at all. Some discussions on this subject are in this wiki page about proposals to reform the MonadPlus class. So I guess I have one specific question: What monad instances, if any, have a natural fail method, but cannot be instances of MonadPlus because they have no logical implementation for mplus? But I'm mostly interested in a discussion about this subject. Thanks! EDIT: One final thought occured to me. I recently learned (even though it's right there in the docs for fail) that monadic "do" notation is desugared in such a way that pattern match failures, as in (x:xs) <- return [] call the monad's fail. It seems like the language designers must have been strongly influenced by the prospect of some automatic failure handling built in to haskell's syntax in their inclusion of fail in Monad.

  Read the article

• Is DOM not being loaded ?

  - by Daniel

  I went through episode 88 (Dynamic menus) of the railscasts and when I try to load my *js.erb file in the browser shows me that my fetched data from the controller is getting there Controller def dynamic_departments @departments = Department.all end localhost:3000/javascripts/dynamic_departments.js var departments = new Array(); departments.push(new Array(1,'????',1)); departments.push(new Array(2,'???-???',2)); function facultySelected(){ faculty_id = $('falculty_id').getValue(); options = $('department_id').options; options.length = 1; departments.each(function(department){ if(department[0] == faculty_id){ options[options.length] = new Option(department[1],department[2]) } }); if(options.length == 1){ $('department_field').hide(); } else { $('department_field').show(); } } document.observe('dom:loaded', function(){ alert("DOM loaded"); //$('department_field').hide(); //$('faculty_id').observe('change',facultySelected); }); My routes.rb has the match ':controller/:action.:format' Still...after the page's loaded and I change the value of my collection_select or select nothing happens.What am I missing? *I called the 'alert' and commented the rest to test it....still nothing.

  Read the article

• Rails 3, Devise and custom controller action

  - by Johnny Klassy

  routes.rb match 'agencies/stub' => 'agencies#stub', :via => :get resources :agencies Here's the rake routes dump agencies_stub GET /agencies/stub(.:format) {:controller=>"agencies", :action=>"stub"} agencies GET /agencies(.:format) {:action=>"index", :controller=>"agencies"} POST /agencies(.:format) {:action=>"create", :controller=>"agencies"} new_agency GET /agencies/new(.:format) {:action=>"new", :controller=>"agencies"} edit_agency GET /agencies/:id/edit(.:format) {:action=>"edit", :controller=>"agencies"} agency GET /agencies/:id(.:format) {:action=>"show", :controller=>"agencies"} PUT /agencies/:id(.:format) {:action=>"update", :controller=>"agencies"} DELETE /agencies/:id(.:format) {:action=>"destroy", :controller=>"agencies"} Devise is setup to have all agenciesroutes only accessible as admin. The call I'm testing with is http://xyz:12345@localhost:3000/agencies/stub but it doesn't authenticate properly, ie, it doesn't recognize it as admin and throws me back to the Devise login page. The creds are a valid admin account. I'm baffled and have no idea why this is happening. Any insights will be much appreciated.

  Read the article

• Java reflection appropriateness

  - by jsn

  This may be a fairly subjective question, but maybe not. My application contains a bunch of forms that are displayed to the user at different times. Each form is a class of its own. Typically the user clicks a button, which launches a new form. I have a convenience function that builds these buttons, you call it like this: buildButton( "button text", new SelectionAdapter() { @Override public void widgetSelected( SelectionEvent e ) { showForm( new TasksForm( args... ) ); } } ); I do this dozens of times, and it's really cumbersome having to make a SelectionAdapter every time. Really all I need for the button to know is what class to instantiate when it's clicked and what arguments to give the constructor, so I built a function that I call like this instead: buildButton( "button text", TasksForm.class, args... ); Where args is an arbitrary list of objects that you could use to instantiate TasksForm normally. It uses reflection to get a constructor from the class, match the argument list, and build an instance when it needs to. Most of the time I don't have to pass any arguments to the constructor at all. The downside is obviously that if I'm passing a bad set of arguments, it can't detect that at compilation time, so if it fails, a dialog is displayed at runtime. But it won't normally fail, and it'll be easy to debug if it does. I think this is much cleaner because I come from languages where the use of function and class literals is pretty common. But if you're a normal Java programmer, would seeing this freak you out, or would you appreciate not having to scan a zillion SelectionAdapters?

  Read the article

• Why doesn't the spring @Autowire work with java generics

  - by testing123

  Inspired by spring data awesomeness I wanted to create a abstract RESTController that I could extend for a lot of my controllers. I created the following class: @Controller public abstract class RESTController<E, PK extends Serializable, R extends PagingAndSortingRepository<E, PK>> { @Autowired private R repository; @RequestMapping(method=RequestMethod.GET, params={"id"}) @ResponseBody public E getEntity(@RequestParam PK id) { return repository.findOne(id); } ... } I was hoping that the generics would allow me to @Autowire in the repository but I get the following error: SEVERE: Allocate exception for servlet appServlet org.springframework.beans.factory.NoSuchBeanDefinitionException: No unique bean of type [org.springframework.data.repository.PagingAndSortingRepository] is defined: expected single matching bean but found 3: [groupRepository, externalCourseRepository, managedCourseRepository] at org.springframework.beans.factory.support.DefaultListableBeanFactory.doResolveDependency(DefaultListableBeanFactory.java:800) at org.springframework.beans.factory.support.DefaultListableBeanFactory.resolveDependency(DefaultListableBeanFactory.java:707) at org.springframework.beans.factory.annotation.AutowiredAnnotationBeanPostProcessor$AutowiredFieldElement.inject(AutowiredAnnotationBeanPostProcessor.java:478) at org.springframework.beans.factory.annotation.InjectionMetadata.inject(InjectionMetadata.java:87) at org.springframework.beans.factory.annotation.AutowiredAnnotationBeanPostProcessor.postProcessPropertyValues(AutowiredAnnotationBeanPostProcessor.java:284) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1106) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:517) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:294) I understand what the error is telling me, there is more than one match for the @Autowire. I am confused because I thought by creating the following controller it would work: @Controller @RequestMapping(value="/managedCourse") public class ManagedCourseController extends RESTController<ManagedCourse, Long, ManagedCourseRepository> { ... } This is easy enough to work around by doing having a method like this in the RESTController: protected abstract R getRepository(); and then doing this in your implementing class: @Autowired private ManagedCourseRepository repository; @Override protected ManagedCourseRepository getRepository() { return repository; } I was just wondering if someone had any thoughts of how I could get this to work.

  Read the article

• LINQ query to find if items in a list are contained in another list

  - by cjohns

  I have the following code: List<string> test1 = new List<string> { "@bob.com", "@tom.com" }; List<string> test2 = new List<string> { "[email protected]", "[email protected]" }; I need to remove anyone in test2 that has @bob.com or @tom.com. What I have tried is this: bool bContained1 = test1.Contains(test2); bool bContained2 = test2.Contains(test1); bContained1 = false but bContained2 = true. I would prefer not to loop through each list but instead use a Linq query to retrieve the data. bContained1 is the same condition for the Linq query that I have created below: List<string> test3 = test1.Where(w => !test2.Contains(w)).ToList(); The query above works on an exact match but not partial matches. I have looked at other queries but I can find a close comparison to this with Linq. Any ideas or anywhere you can point me to would be a great help.

  Read the article

< Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232  | Next Page >