Search Results

Search found 8555 results on 343 pages for 'virtualbox networking'.

Page 227/343 | < Previous Page | 223 224 225 226 227 228 229 230 231 232 233 234  | Next Page >

• External HDD connecting via USB disconnects wireless LAN connection

  - by Kensai

  Strange problem. I have this MEDION Akoya PC that has a dedicated bay to slide an external HDD sold separately. It's very handy indeed cause the slot is providing a fast USB 3 connection and power to the HDD unit, without extra cables. All works fine except this show-stopper behavior to disconnect me from the router once I slide in the unit and it powers up. The moment I connect the unit the (normally) three-four WiFi connections I see in my neighborhood disappear and my own to the router loses its signal strength (no Internet traffic is possible). After a while it throws me off that one as well, never to connect me again as long as the unit is powered. Once I disconnect the HDD the various signals come back and it automatically reconnects to my own. What takes? Are we in front of a serious design fault by MEDION here? Does the spinning of the HDD on top of the PC cause electromagnetic interference strong enough to throw off my WiFi connectivity? Is it a simple USB problem? Some kind of strange hardware conflict? Where should I look?

  Read the article

• Can I use Server Monitor with a non-server Mac?

  - by Chris

  I have a computer I use as a simple file and web server. I am simply desiring to be able to monitor load, traffic, memory usage, etc via Server Monitor. I have also downloaded an app for my iPhone which does the same thing, but it uses the same protocol that Server Monitor does. Is it possible to get Server Monitor to recognize my non-server box as a server so I can monitor this information? For reference, I am running 10.4.ll on this PPC box. Thanks in advance!

  Read the article

• How do I connect my Windows XP laptop to the internet?

  - by rubysiddhi

  Hello fellow super users, The Past I have a Acer Travelmate 2300 laptop running Windows XP. 6 months ago I moved into a new apartment and got a new internet connection set up. After getting an internet connection installed in my apartment I reinstalled Windows XP and at the same time wiped my drive clean losing all the original Acer software and drivers. Once XP was reinstalled I had to find all the drivers again to get the Travelmate laptop connected to the internet. So, using my Vista laptop which was connected fine, I went to the Acer Travelmate Series drivers download page to download the necessary drivers. I transferred them to my Acer XP machine and installed them the best I could (there were no easy instructions so I just had to find all the executables and run them). I eventually got connected to the internet but not exactly in the way I had hoped for. The Present To be connected to the internet I need to have an Ethernet cord connecting my computer (via the Ethernet port) to my router. This is a problem since it defeats the purpose of having a Wireless LAN card in my Acer laptop. One of the programs I downloaded from the Acer Travelmate Series page was the Acer Wireless LAN Configuration Utility. This program allows me to see the current network I am connected to and all the available networks I could potentially connect to. It reminds me of XP's Wireless Network Connection window/utility where you can see all available wireless networks, refresh the network list and connect to one of the networks. I should mention that my ISP set up a security enabled wireless network with WPA. This network requires a network key if you want to connect to it. I guess my Vista computer has the network key entered into it already. The problem is that I do not know what the network key is. Now obviously you would say just contact my ISP to get the key. And I will but there is just one extra weird issue. I am able to connect to another unsecured wireless network in the Wireless Network Connection window/utility. I can be on it as long as my Ethernet cable is plugged in. So this is not really wireless is it? And this indicates that even if I do get that network key password from my ISP, I will only solve one of the two problems I have. I will only solve being able to get online as long as I am connected to my router via the Ethernet cable. The Main Questions So how do I enable my acer IPN2220 Wireless LAN Card so that I can use my Acer laptop from anywhere with in my apartment? Or should I first get the network key from my ISP to access my security enabled wireless network? And then deal with getting the acer IPN2220 Wireless LAN Card working? Hard & Learned VS Easy & Stupid Of course contacting the ISP would be easier. Have em just come in here and do there thing. The problem with that is that they do not speak English (yeah, im in Poland) and it'd be a hell of a time trying to understand what they are doing (uncomfortable looking over their shoulder). Also, I want to learn how to do this task myself so that I can fix the problem if it ever happens again. You know, be more self sufficient. I look forward to helpful replies. Thanks, Xaviour

  Read the article

• Two Network Adapters on Hyper-V Host - Best way to configure?

  - by GoNorthWest

  I have two physical network adapters installed in my Hyper-V host. I want one to be dedicated to the host, and the other to provide external network services to the VMs. Would the appropriate configuration be as such: Leave the first physical network adapter alone, assigning it the host IP, but not using it to create any Virtual Netorks For the second physical adapter, I would create an External Network, along with a Microsoft Virtual Switch, and use that to provide network services to the VMs. Each virtual NIC for the VM would be associated with that External Network. A static IP would be assigned to this adapter, and each VM would be assigned a static IP as well. The above seems reasonable to me, but I'm not sure if it's correct. Does anyone have any thoughts? Thanks! Mark

  Read the article

• How can I capture a process's network traffic?

  - by Yassin

  I would like to capture the traffic generated by a specific process (using Wireshark or other packet sniffer). Does anyone know how to do it? Thanks!

  Read the article

• Is there a good tool for monitoring network activity on Mac OS X?

  - by xentek

  Is there a good bit of software on Mac OS X that I can use to monitor incoming and outgoing network activity? Nothing too geeky, I just want something simple to use. I'm on version 10.6 (Snow Leopard) if that helps.

  Read the article

• Network connection via USB

  - by Fco

  Can I get my Nexus One/Android on my local network over USB instead of WiFi and browse to my computer's IP address, the one to which the phone would be connected to, via USB? For instance, let's say my computer has an IP address 100.1.1.1 and when I go to it from the computer I would go to my localhost and see a website I've set up locally in the computer. Then, I connect my phone to that computer via USB. Can I then go to 100.1.1.1 from the browser and see the same website? All this through the USB, no WiFi?

  Read the article

• How can I solve Windows PPTP VPN issues?

  - by Robin M

  I'm having persistent problems with Windows PPTP VPN connections. The VPN appears up whilst the tunnel won't transfer traffic (ping to a remote IP within the VPN works for a while, and then fails). The client receives routing information via DHCP. When the connection fails, the routing table is still correct so I don't think it's a routing problem. My internet connection is via an ADSL2 line. There's software to deal with PPTP problems, like TunnelRat, but I don't want to install v1.1 of the .NET framework and I'd rather get to the bottom of the problem (I have multiple VPN connections and some are more unreliable than others). What can I do to get to the bottom of this? Alternatively, what can I do to keep the connection alive?

  Read the article

• Setting up Relays in Windows

  - by Auditor

  I'm trying to setup a pivoting relay with netcat on Windows, replicating a scenario easily possible by using pipes in Linux. Assume machine A can route to machine B and machine B can route to machine C. If machine A needs to route to machine C, we can setup a relay on machine B which can pivot data back and forth for us using command redirectors and spl filetype pipe. Assume: machine C has nc -nlvp 3306 -e cmd.exe machine A has nc -nlvp 80 IF machine B was Linux we could have done mkfifo pipe nc -nv 127.0.0.1 80 0<pipe | nc -nv 127.0.0.1 3306 1>pipe so on machine B if we do nc -nv 127.0.0.1 80 0<&4 | nc -nv 127.0.0.1 3306 1>&4 Per this site, I should be able to achieve what I can with Linux, but unfortunately it is not working.

  Read the article

• Mac | Router not assigning the IP address.

  - by Vaibhav Bajpai

  I recently installed Mac OS X 10.6, however the ethernet state is down. The assigned IP is 169.x.x.x. When booted the live USB of Ubuntu, I properly get an IP assigned in the range 192.168.1.x from the router 192.168.1.1 I am using the same router and same ethernet line. I tried to ping to 192.168.1.1 from my Mac and I get a host down message. I tried to manually assign the IP and set the router IP to 192.168.1.1 but still the router is unreachable.

  Read the article

• Can i connect my modem's ethernet and usb slot to two computers simultaneously??

  - by Rajasekar

  I have NETGEAR BROADBAND MODEM. I had a desktop and laptop. I had connected internet to dekstop by using Ehternet slot on my modem to my ethernet slot on my Desktop. I need internet connection on my Laptop too. There is another slot in modem which can be connect using USB cable. Whether i can connect the laptop with that USB slot in my modem and use both the computer's internet? whether it will work??

  Read the article

• ubuntu 12.04 kvm virtual server network setup, can't get the machine to be connectable

  - by xyious

  I have worked on my Ubuntu Server host for weeks now and I just can not manage to get the virtual machines into the network.... here's what I need to do: I need to be able to create virtual machines that have IP addresses that can be reached from the outside (192.168 network). I need to be able to connect to the virtual machines through ssh, ftp, http and preferably https, anything else doesn't matter that much. So far everything seems simple enough and I have a lot of leeway in terms of IP address range and server/client configuration. I have the option of taking part of a /24 net as most IPs aren't used, and if it's absolutely necessary I have the option of creating a new /24 subnet. Also have the option of reformatting and reinstalling OS on the host and recreating the virtual machines as nothing has been done other than trying to get virtual machines to work. I would prefer if the virtual machines were just part of the normal network which would be 192.168.5.0/24. The host machine has 2 network cards so I don't even necessarily need the Host to be connectable in the same /24 network. I have tried (I think) just about everything from about 5 different tutorials on bridging (giving br0 the same IP that eth0 used to have (Host is able to connect to VM and vice versa, VM doesn't have outside network access), having eth0 set up like it always was and having br0 have a different IP (same as above), NAT with port forwarding (which I would have preferred not to use but will if it works), turning off one of the hosts network cards and just using one of them, different subnets.... etc. I do know my way around iptables fairly well.... Host is 64bit Ubuntu Server 12.04, using libvirt/kvm. edits: Local network is 192.168.5.0/24, host has static ip 192.168.5.254, GW .5.1 which is also nameserver. We have a second Local network at 192.168.10.0/24 with .10.1 GW, but both hosts and VMs were supposed to go into the .5 subnet. The .10 subnet isn't required, but it wouldn't be horrible if the Host were only accessible in the .10 subnet.

  Read the article

• Network-related icons suddenly removed

  - by Velcro

  Hello, On a fresh Windows 7 installation, I created some shortcuts icons to network shares on the Desktop. Without any warning, these icons are sometimes and randomly deleted from Desktop. I totally don't understand what it happens! They are not hidden, they just are simply deleted. This behavior occurs on one computer in my company. Others Windows 7 computers are not affected by that. And also it's the first time I encounter that. Do you have an idea about this problem? Thanks.

  Read the article

• How to configure linux routing/filtering to send packets out one interface, over a bridge and into another interface on the same box

  - by rj75

  I'm trying to test a ethernet bridging device. I have multiple ethernet ports on a linux box. I would like to send packets out one interface, say eth0 with IP 192.168.1.1, to another interface, say eth1 with IP 192.168.1.2, on the same subnet. I realize that normally you don't configure two interfaces on the same subnet, and if you do the kernel routes directly to each interface, rather than over the wire. How can I override this behavior, so that traffic to 192.168.1.2 goes out the 192.168.1.1 interface, and visa-versa? Thanks in advance!

  Read the article

• Wireless Internet Connection Sharing in Ubuntu

  - by klutch2

  As the title states, I need to share a wireless connection with a laptop running Ubuntu as the AP. The setup will be as follows: Corporate WiFi <<== Laptop <<== Other Devices i.e. (iPad, iPhone) I want to be able to connect the "Other Devices" via WiFi to the laptop. I have thought of setting up an ad-hoc network by connecting to the Corporate WiFi and then setting up a new network and hoping the connection to both would stay, but that doesn't seem to work. If I set up the ad-hoc network by itself, I can see it from my "Other Devices". The reason I need this is because for some reason, my iPad and my iPhone will not connect to my corporate WiFi and I need to use them so I want to use my laptop to share the connection and act as an AP for my "Other Devices". My laptop is a Chrome CR-48 running Ubuntu and as some of you might know, it does not have an ethernet port, so having a wired connecting and then setting up a network is out of question. I want to connect to the Corporate WiFi and share that connection by having the laptop act as an AP for other devices.

  Read the article

• How can I use my Windows 7 computer to share WiFi connection with PCs that don't have wireless?

  - by Tom Auger

  Long story short: modem and wireless router are downstairs and we're having a LAN party where some visitors don't have wireless. There's no way to run the length of cabling required, so looking for options. My Windows 7 Home Premium PC has a wireless-n connection, and I'd like to see if I can use it as a "hub" or switch of sorts, running an ethernet cable out of the back and into a switch, then splitting off to the other PCs. Is this an option? I know with Internet sharing, you can set up your PC as a wireless access point, but I want to do the opposite.

  Read the article

• Network connectivity issue

  - by kubiej21

  I am a novice cisco user and I am trying to investigate as to why one of our connections went down. We have a fiber network ring that is operating just fine. Connected to this ring via ethernet, is a lone 3560. This connection has worked flawlessly for the past year and a half. This morning, I noticed that I could not connect to that remote switch. I checked the configurations on both switches, and nothing has changed (as I expected). In the field, the port lights were flashing, indicating that some sort of communication is occurring. There is only 1 ethernet cable that has been run between these two locations, so testing an alternate path is not possible. What else can I do to fix this connection?

  Read the article

• Two NICs, one server.

  - by kobrien

  I have two NICs on a fresh install of Ubuntu 10.04 LTS. Both are config'd be dhcp. Both cards are on the same lan with same gateway. everything about the cards is the same except the IPs they get, which is what I want. What I'm trying to achieve is having both NICs operational at the same time. Currently when the server boots, it activates both NICs, but the server can't resolve any domains. If I ifdown one of them and bring it back up, the server is able to resolve domains, but the NIC I bring up won't respond to any traffic. Any ideas?

  Read the article

• How do I justify to my management that we need a bandwidth upgrade?

  - by Sandeep

  I work in an office with a 8mbps line and about a 100 people. Our internet has slowed to crawl over the past few months, as we added headcount. However, using speedtest.net or other sites, still shows bandwidth as 8mbps. Now, how do I justify to management that we indeed need to upgrade our bandwidth ? Please note that I dont have access to our main routers or any network equipment. I can only use my system (windows+linux dual boot) to make a case for a reasonable justification. help!

  Read the article

• Website ocasionally does not load on first click

  - by tfe

  Today I noticed that my website hosted on a virtual server ocasionally does not load on first click. I click on some link, browser starts loading page but nothing loads and does not not appear any error message (like "connection reset by peer etc). Nothing. When I click the same link again, page loads immediately. The same situation on 2 computers in different browsers. It happends not always, maybe on each 20... or 30 click. Sites from other servers load without this problem. Any ideas what can cause this problem?

  Read the article

• I need a wirless interenet card thingy for my stationary computer

  - by user60859

  Going to move my stationary computer and hook it up to the TV. Which is far away from the wireless router. So i'm going to need a way to go on the Internet wirelessly from my stationary computer. I was looking at some of those.. wireless pci adapter things. But i have no idea which one would be compatible with my computer. How can i tell? oh i have a pentium 4, Windows XP like 600 megs of ram in case any of that matters.

  Read the article

• What are the methods of separating network spaces in a LAN?

  - by dash17291

  Please detail me the methods. My thoughts: put the servers in separate (sub)networks the servers are forced to go through the firewall but no NAT is required assign more IP addresses to the internal interface of the server choosing gateway addresses from the clients and servers IP address ranges split DNS Netfilter/{iptables, ipset} could be heavily involved, I'm talking about Linux servers. See for example: Destination NAT Onto the Same Network from internal clients Please do not explain what is NAT or DNS. This is a theoretical question, but my poor English knowledge prevent me to describe it in a fancy fashion.

  Read the article

• How can one restrict network activity to only the VPN on a Mac and prevent unsecured internet activity?

  - by John

  I'm using Mac OS and connect to a VPN to hide my location and IP (I have the 'send all traffic over VPN connection' box checked in teh Network system pref), I wish to remain anonymous and do not wish to reveal my actual IP, hence the VPN. I have a prefpan called pearportVPN that automatically connects me to my VPN when I get online. The problem is, when I connect to the internet using Airport (or other means) I have a few seconds of unsecured internet connection before my Mac logs onto my VPN. Therefore its only a matter of time before I inadvertently expose my real IP address in the few seconds it takes between when I connect to the internet and when I log onto my VPN. Is there any way I can block any traffic to and from my Mac that does not go through my VPN, so that nothing can connect unless I'm logged onto my VPN? I suspect I would need to find a third party app that would block all traffic except through the Server Address, perhaps Intego Virus Barrier X6 or little snitch, but I'm afraid I'm not sure which is right or how to configure them. Any help would be much appreciated. Thanks!

  Read the article

• Protocol (or service publish/discovery) to detect devices in network

  - by Gobliins

  we connect some embedded devices in a network. What i am looking for now, is a way to find the devices IP and identify them. We work with Windows PC´s and i am about to write a C# tool that should do this. I thought about send a udp broadcast and in the ack i.e. is the device´s ip, which would mean the device needs a daemon runnig to assign an ip itself. Running a service (like a printer) on the device, and on the PC just lookup for the service. I read about some things like apipa, zeroconf, ipv4 local link, bonjour, dns-sd, mdns, bonjour; They can automatically assign ip´s and publish services in a network. My Question is, can someone recommend me what would be good for my task? -The protocol or Service should be low on ressource (memory/cpu usage) use. -Are there some standard protocolls to use? -Is DNS a good idea or would it be to ressource consumpting just for finding a device´s IP? -Should also work when no dhcp servers are around. edit: To clarify a bit: The IP configuration is automatic. The problem to focus is how to tell the PC which IP in the network (or a direct connection in this vase there would only be one) belongs to the device (identity).

  Read the article

• Regarding the functioning of the HTTP server

  - by Luv

  As all of us uses the HTTP protocol for accessing the web, and request at the port number 80 of the server, now suppose i want to browse or download a file then i will request to the HTTP server by specifying the complete URL. If the server is having file, it would return it if it is not having the file then what will it do? I think it will make the request to the appropriate server which would be having this file and get the file and return to us. In this way does the HTTP server acts as an intermediate between the client and the server? Please correct me if i am wrong here. Many many thanx in advance

  Read the article

< Previous Page | 223 224 225 226 227 228 229 230 231 232 233 234  | Next Page >