Search Results

Search found 27097 results on 1084 pages for 'document library'.

Page 229/1084 | < Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >

• Where should I start with debugging my exchange server?

  - by joadha

  I'm (foolishly?) attempting to install Exchange on top of Windows Server 2008 (64-bit) over Virtual Box running on Mac OSX Lion. Everything went smoothly until I got to the "Readiness Checks" tab. Readiness failed spectacularly on Hub Transport Role and Mailbox Role prereqs. Before I go too far down the rabbit hole in attempting to remedy this, I was hoping I could get some input on where to start in all of this. I already set up the following Active Directory roles, but it didn't seem to help: Active Directory Domain Services Active Directory Lightweight Directory Services I also enabled an Application Server role. Those three are the only roles I've set up-- I cannot locate within Server Manager the Organization Manager role or any of the other roles referenced in the list of borkedness below. Is this a typical experience in Exchange installation? Is there a tutorial created by somebody outside of Microsoft? Here's the output from Readiness Checks: Summary: 5 item(s). 2 succeeded, 3 failed. Elapsed time: 00:00:53 Configuring Prerequisites Completed Elapsed Time: 00:00:00 Languages Prerequisites Completed Elapsed Time: 00:00:09 Hub Transport Role Prerequisites Failed Error: Active Directory does not exist or cannot be contacted. Click here for help... http://go.microsoft.com/fwlink/? linkid=30939&l=en&v=ExBPA.14&id=51e5500d-8b18-4eee-bb8e-925d063b60a1 Error: You must be a member of the 'Organization Management' role group or 'Enterprise Admins' group to continue. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=1d750594-9222-44d7-8f80-45e522e889e6 Error: Setup encountered a problem while validating the state of Active Directory: Could not find information about the local domain. Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex28883C&l=0&cl=cp Error: You must be logged on as an Exchange organization administrator to install or upgrade the first Hub Transport server role in the topology. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=e58f51fd-2c66-4a4b-914a-628dccf9a09f Error: The 'IIS 6 Metabase Compatibility' component is not installed. Install the component via Server Manager. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=0a71c4f6-68de-40f7-94cf-74b73cbda37b Error: The 'IIS 7 Basic Authentication' component required. Install the component via Server Manager. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=41a25c5e-0d39-4e55-a1f0-7be885982236 Error: The 'IIS 7 Windows Authentication' component is required. Install the component via Server Manager. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=41a25c5e-0d39-4e55-a1f0-7be885982236 Error: The 'IIS 7 .NET Extensibility' component is required. Install the component via Server Manager. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=5f29a861-f472-4f11-a23a-04155373f5ed Error: This computer is not part of a Windows domain. Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex28883C&l=0&cl=cp Error: The user is not logged on to a Windows domain Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex28883C&l=0&cl=cp Warning: This computer requires the Microsoft Office 2010 Filter Packs. Please install the software from http://go.microsoft.com/fwlink/?LinkID=191548 Warning: The 'IIS 6 Management Console' component is recommended as it allows for the administration of all server roles. Install the component via Server Manager. Warning: Setup cannot verify that the 'Host' (A) record for this computer exists within the DNS database on server 10.1.10.1. Elapsed Time: 00:00:15 Client Access Role Prerequisites Failed Error: Active Directory does not exist or cannot be contacted. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=51e5500d-8b18-4eee-bb8e-925d063b60a1 Error: Unable to read data from the Metabase. Ensure that Microsoft Internet Information Services is installed. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=a4a4d339-4009-4fb7-b842-ca2ba79f13f0 Error: The World Wide Web (W3SVC) service is either disabled or not installed on this computer. You must exit Setup, install the required component, then restart the Setup process. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=9eeaa77f-4d46-4d9a-9c36-f262a075392b Error: You must be a member of the 'Organization Management' role group or 'Enterprise Admins' group to continue. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=1d750594-9222-44d7-8f80-45e522e889e6 Error: Setup encountered a problem while validating the state of Active Directory: Could not find information about the local domain. Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex28883C&l=0&cl=cp Error: You must be logged on as an Exchange organization administrator to install or upgrade the first Client Access server role in the topology. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=e58f51fd-2c66-4a4b-914a-628dccf9a09f Error: The 'IIS 6 Metabase Compatibility' component is not installed. Install the component via Server Manager. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=0a71c4f6-68de-40f7-94cf-74b73cbda37b Error: The 'IIS 6 Management Console' component is not installed. Install the component via Server Manager. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=0a71c4f6-68de-40f7-94cf-74b73cbda37b Error: The 'IIS 7 Dynamic Content Compression' component is required. Install the component via Server Manager. Click here for help... http://go.microsoft.com/fwlink/? linkid=30939&l=en&v=ExBPA.14&id=41a25c5e-0d39-4e55-a1f0-7be885982236 Error: The 'IIS 7 Static Content Compression' component is required. Install the component via Server Manager. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=41a25c5e-0d39-4e55-a1f0-7be885982236 Error: The 'IIS 7 Basic Authentication' component required. Install the component via Server Manager. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=41a25c5e-0d39-4e55-a1f0-7be885982236 Error: The 'IIS 7 Windows Authentication' component is required. Install the component via Server Manager. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=41a25c5e-0d39-4e55-a1f0-7be885982236 Error: The 'IIS 7 Digest Authentication' component is required. Install the component via Server Manager. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=41a25c5e-0d39-4e55-a1f0-7be885982236 Error: The 'IIS 7 .NET Extensibility' component is required. Install the component via Server Manager. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=5f29a861-f472-4f11-a23a-04155373f5ed Error: This computer is not part of a Windows domain. Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex28883C&l=0&cl=cp Error: The user is not logged on to a Windows domain Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex28883C&l=0&cl=cp Warning: Setup cannot verify that the 'Host' (A) record for this computer exists within the DNS database on server 10.1.10.1. Elapsed Time: 00:00:14 Mailbox Role Prerequisites Failed Error: Active Directory does not exist or cannot be contacted. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=51e5500d-8b18-4eee-bb8e-925d063b60a1 Error: Unable to read data from the Metabase. Ensure that Microsoft Internet Information Services is installed. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=a4a4d339-4009-4fb7-b842-ca2ba79f13f0 Error: The World Wide Web (W3SVC) service is either disabled or not installed on this computer. You must exit Setup, install the required component, then restart the Setup process. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=9eeaa77f-4d46-4d9a-9c36-f262a075392b Error: You must be a member of the 'Organization Management' role group or 'Enterprise Admins' group to continue. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=1d750594-9222-44d7-8f80-45e522e889e6 Error: Setup encountered a problem while validating the state of Active Directory: Could not find information about the local domain. Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex28883C&l=0&cl=cp Error: You must be logged on as an Exchange organization administrator to install or upgrade the first Mailbox server role in the topology. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=e58f51fd-2c66-4a4b-914a-628dccf9a09f Error: The 'IIS 6 Metabase Compatibility' component is not installed. Install the component via Server Manager. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=0a71c4f6-68de-40f7-94cf-74b73cbda37b Error: The 'IIS 6 Management Console' component is not installed. Install the component via Server Manager. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=0a71c4f6-68de-40f7-94cf-74b73cbda37b Error: The 'IIS 7 Basic Authentication' component required. Install the component via Server Manager. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=41a25c5e-0d39-4e55-a1f0-7be885982236 Error: The 'IIS 7 Windows Authentication' component is required. Install the component via Server Manager. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=41a25c5e-0d39-4e55-a1f0-7be885982236 Error: The 'IIS 7 .NET Extensibility' component is required. Install the component via Server Manager. Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=5f29a861-f472-4f11-a23a-04155373f5ed Error: This computer is not part of a Windows domain. Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex28883C&l=0&cl=cp Error: The user is not logged on to a Windows domain Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex28883C&l=0&cl=cp Warning: This computer requires the Microsoft Office 2010 Filter Packs. Please install the software from http://go.microsoft.com/fwlink/?LinkID=191548 Warning: Setup cannot verify that the 'Host' (A) record for this computer exists within the DNS database on server 10.1.10.1. Elapsed Time: 00:00:14

  Read the article

• Time machine disk icon on boot disk

  - by Ben Lings

  The icon for Macintosh HD (my boot disk) shows as a Time Machine disk. There is a file .com.apple.timemachine.supported in the root of the disk. If I delete the file and restart the computer, the icon goes back to a normal HD icon. However, the .com.apple.timemachine.supported file is recreated at some point on boot because when I log in again, the file has been recreated. If then reboot again, the icon goes back to being a Time Machine one. Any ideas about what is creating this file and why? More importantly - how can I get it to stop? It looks like something thinks the boot disk should be a Time Machine volume, but what? Console.app shows the following messages at approximately hourly intervals: 19/01/2010 19:23:54 /System/Library/CoreServices/backupd[7459] Starting standard backup 19/01/2010 19:23:54 /System/Library/CoreServices/backupd[7459] Cookie file is not readable or does not exist at path: /.<12 hex digits of MAC address for en0> 19/01/2010 19:23:54 /System/Library/CoreServices/backupd[7459] Volume at path / does not appear to be the correct backup volume for this computer. (Cookies do not match) 19/01/2010 19:23:59 /System/Library/CoreServices/backupd[7459] Backup failed with error: 18 Other possibly relevant information: The boot HD isn't the original - the original failed so this is a SuperDuper'd clone of the original drive. I used to use the same disk for a SuperDuper clone as for Time Machine. These are the same same symptoms as this and this.

  Read the article

• How do I start nginx on port 80 at OS X login?

  - by Bryson

  I installed Nginx using homebrew and after completing the installation the following message was displayed: In the interest of allowing you to run `nginx` without `sudo`, the default port is set to localhost:8080. If you want to host pages on your local machine to the public, you should change that to localhost:80, and run `sudo nginx`. You'll need to turn off any other web servers running port 80, of course. You can start nginx automatically on login running as your user with: mkdir -p ~/Library/LaunchAgents cp #{prefix}/org.nginx.nginx.plist ~/Library/LaunchAgents/ launchctl load -w ~/Library/LaunchAgents/org.nginx.nginx.plist Though note that if running as your user, the launch agent will fail if you try to use a port below 1024 (such as http's default of 80.) But I want Nginx, on port 80, running at login and I don't want to have to open terminal and type in sudo nginx to do it. I want it to load from a plist file like Redis and PostgreSQL do. I moved the plist to /Library/LaunchAgents/ from the user folder equivalent and changed its ownership, also tried setting the user directive in the nginx.conf file and still the same error message in Console.app: nginx: [emerg] bind() to 0.0.0.0:80 failed (13: Permission denied) (along with another message telling me that since nginx was being run without super-user privileges, the user directive was being ignored)

  Read the article

• "Could not claim interface on camera: -6" when trying to connect usb camera (Kinect)

  - by rzetterberg

  I have installed the freenect library from openkinect.org. With that library there is a demo application which you can run from the terminal to test out the Kinect. However when I run this command I get the following output: richard@behemoth:~$ sudo freenect-glview Kinect camera test Number of devices found: 1 Could not claim interface on camera: -6 Could not open device This particular error is thrown by the library libusb by the function libusb_claim_interface and the error -6 corresponds to the LIBUSB_ERROR_BUSY. So my guess is that it has something to do with mounting the usb, rather than specifically the freenect library or the Kinect itself. So my question is how can I find out what resource is using this interface and how can I free it so that I can access it? Edit: What I have tried so far (just to be sure): Rebooted Plugged-out, plugged-in Tried different usb ports Restarted udev Additional information that might be useful: /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=1c73f217-ac8d-451b-8390-7a680628a856 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=bb49bd29-07ec-45a0-bbab-46fb8362b06b none swap sw 0 0 sudo uname -r: Linux behemoth 3.0.0-14-generic-pae #23-Ubuntu SMP Mon Nov 21 22:07:10 UTC 2011 i686 i686 i386 GNU/Linux cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=11.10 DISTRIB_CODENAME=oneiric DISTRIB_DESCRIPTION="Ubuntu 11.10"

  Read the article

• how to import mesh animation from cinema4d into blender ?

  - by George Profenza

  I need to import a mesh animation from Cinema4D into Blender. I tried to do that using Collada.The Collada 1.3 importer doesn't seem to do anything, the Collada 1.4 importer seems to work, but the animation didn't get imported into Blender. After reading this post, I tried modifying the animation nodes in the collada files, as explained in the post: <library animation> <animation> <animation> data <animation> <animation> data <animation> <animation> <library animation> to this: <library animation> <animation> data <animation> <animation> data <animation> <library animation> , but that doesn't work for me. I get an errors when the file is parsed. Any hints on how to import a mesh animation from Cinema4D into Blender ?

  Read the article

• MAMP - Host name changes to first vhost SSL entry for project with two localhosts

  - by user1322092

  I have two projects that are a copy of each other on my Mac with MAMP. They both have SSL pages. However, whenever I hit the a secured SSL page of project 2, the base_url or host changes to project1 instead of remaining project2. I know this is an issue with the vhosts, because if I switch the order of the entries, the reverse happens. Here's my config files: /Applications/MAMP/conf/extra/httpd-ssl.conf <VirtualHost _default_:443> DocumentRoot "/Applications/MAMP/htdocs/proj1" ServerName proj1.localhost:443 ErrorLog "/Applications/MAMP/Library/logs/error_log" TransferLog "/Applications/MAMP/Library/logs/access_log" SSLEngine on SSLCertificateFile "/Applications/MAMP/conf/apache/ssl/server.crt" SSLCertificateKeyFile "/Applications/MAMP/conf/apache/ssl/server.key" </VirtualHost> <VirtualHost _default_:443> DocumentRoot "/Applications/MAMP/htdocs/proj2" ServerName proj2.localhost:443 ErrorLog "/Applications/MAMP/Library/logs/error_log" TransferLog "/Applications/MAMP/Library/logs/access_log" SSLEngine on SSLCertificateFile "/Applications/MAMP/conf/apache/ssl/server.crt" SSLCertificateKeyFile "/Applications/MAMP/conf/apache/ssl/server.key" </VirtualHost> -------------------- cat /etc/hosts ## # Host Database # # localhost is used to configure the loopback interface # when the system is booting. Do not change this entry. ## 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost 127.0.0.1 proj1.localhost 127.0.0.1 proj2.localhost

  Read the article

• Problems building nodejs on MacOS Snow Leopard

  - by mrwooster

  I am having trouble building nodejs on MacOS Snow Leopard. I think it might have something to do with my PATH variable not being set correctly for the developer tools location. For some reason, the Developer tools (gcc, g++, make etc) are all stored in /Developer/usr/bin I added it to my PATH variable as follows: $ export PATH=$PATH:/Developer/usr/bin $ echo $PATH /opt/local/bin:/opt/local/sbin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/local/git/bin:/usr/X11/bin:/Developer/usr/bin When i try to configure it complains about not finding open-ssl, ok, not a big problem. So I try with --without-ssl : $ ./configure --without-ssl Checking for program g++ or c++ : /Developer/usr/bin/g++ Checking for program cpp : /Developer/usr/bin/cpp Checking for program ar : /usr/bin/ar Checking for program ranlib : /Developer/usr/bin/ranlib Checking for g++ : ok Checking for program gcc or cc : /Developer/usr/bin/gcc Checking for gcc : ok Checking for library dl : yes Checking for library util : yes Checking for library rt : not found --- libeio --- Checking for library pthread : yes Checking for function pthread_create : not found /Users/Guy/git_src/node/node/deps/libeio/wscript:13: error: the configuration failed (see '/Users/Guy/git_src/node/node/build/config.log') Anyone know how I can get round this? I am suspicious that it might be something to do with the PATH or another ENV variable, but not sure. Thanks G

  Read the article

• Digital Asset Management, iPhoto / Aperture server... alternative

  - by Sisyphus

  Afternoon, Clients, 10 : All Apples running either Leopard or Snow Leopard Server : Snow Leopard server, (and I have a old Dell Poweredge 650 at home running Gentoo 2.6, if anybody as a Linux solution). The situation: I work in small design company with 8 people, at present we are looking to consolidate all our image files onto one location, at present we each use our preferred single user DAM solution, be it, Adobe Bridge, iPhoto/Aperture (some don't bother at all) The filetypes commonly used are .psd, .pdf, .eps, .tiff, .jpg and RAW image files. Ideally what is needed: Centralised on one server, but allows us to search via spotlight (not essential, but would be nice) Include searchable metadata information such as date, location, title Open-source or as low cost as possibly Allow simultaneous users to import files So far, I have looked at a few open source DAM, systems, such as Razuna, Gallery (not strictly DAM), ResourceSpace, Notre-DAM, while these are brilliant and open-source, they don't integrate as smoothly with the Desktop as iPhoto and aperture. For iPhoto and aperture, I have tried creating a Shared library on the server (a tad laggy), and also using a drive with no permissions, put a library and letting each client read from it, however if they want to put images onto the library only, it's only supports one user at a time writing to the library... Any ideas what could fulfill our needs? Or is it time to bite the bullet for FinalCut Server? Thanks in advance.

  Read the article

• need to stop mysql server on my mac os x

  - by al0ne evenings

  I just installed xampp on my mac os x. When I tried start mysql it display a message that mysql is already running on this computer. In order to start mysql stop first mysql. I tried following ways to stop it but neither of them works. mysqladmin version sudo /usr/local/mysql/mysql.server stop //mysql.server command not found mysqladmin -u root -p password shutdown //restarts the server but not shutdown when i use which mysql command it shows this path /usr/local/bin/mysql and when I issue ps aux | grep mysqld command I get following output zafarsaleem 85209 0.0 0.3 2699804 13204 ?? S 7:51AM 0:00.88 /Applications/MAMP/Library/bin/mysqld --basedir=/Applications/MAMP/Library --datadir=/Applications/MAMP/db/mysql --plugin-dir=/Applications/MAMP/Library/lib/plugin --lower-case-table-names=0 --log-error=/Applications/MAMP/logs/mysql_error_log.err --pid-file=/Applications/MAMP/tmp/mysql/mysql.pid --socket=/Applications/MAMP/tmp/mysql/mysql.sock --port=8889 zafarsaleem 85093 0.0 0.0 2435488 924 ?? S 7:51AM 0:00.03 /bin/sh /Applications/MAMP/Library/bin/mysqld_safe --port=8889 --socket=/Applications/MAMP/tmp/mysql/mysql.sock --lower_case_table_names=0 --pid-file=/Applications/MAMP/tmp/mysql/mysql.pid --log-error=/Applications/MAMP/logs/mysql_error_log zafarsaleem 86693 0.0 0.0 2425480 180 s004 R+ 8:30AM 0:00.00 grep mysqld zafarsaleem 86507 0.0 0.3 2678756 11364 ?? S 8:07AM 0:00.63 /usr/local/Cellar/mysql/5.5.20/bin/mysqld --basedir=/usr/local/Cellar/mysql/5.5.20 --datadir=/usr/local/var/mysql --plugin-dir=/usr/local/Cellar/mysql/5.5.20/lib/plugin --max-allowed-packet=32M --log-error=/usr/local/var/mysql/Zafars-MacBook-Pro-2.local.err --pid-file=/usr/local/var/mysql/Zafars-MacBook-Pro-2.local.pid zafarsaleem 86447 0.0 0.0 2435488 920 ?? S 8:07AM 0:00.02 /bin/sh /usr/local/bin/mysqld_safe --max_allowed_packet=32M Please help. How can I resolve this issue.

  Read the article

• How to combine try_files and sendfile on Nginx?

  - by hcalves

  I need Nginx to serve a file relative from document root if it exists, then fallback to an upstream server if it doesn't. This can be accomplished with something like: server { listen 80; server_name localhost; location / { root /var/www/nginx/; try_files $uri @my_upstream; } location @my_upstream { internal; proxy_pass http://127.0.0.1:8000; } } Fair enough. The problem is, my upstream is not serving the contents of URI directly, but instead, returning X-Accel-Redirect with a location relative to document root (it generates this file on-the-fly): % curl -I http://127.0.0.1:8000/animals/kitten.jpg__100x100__crop.jpg HTTP/1.0 200 OK Date: Mon, 26 Nov 2012 20:58:25 GMT Server: WSGIServer/0.1 Python/2.7.2 X-Accel-Redirect: animals/kitten.jpg__100x100__crop.jpg Content-Type: text/html; charset=utf-8 Apparently, this should work. The problem though is that Nginx tries to serve this file from some internal default document root instead of using the one specified in the location block: 2012/11/26 18:44:55 [error] 824#0: *54 open() "/usr/local/Cellar/nginx/1.2.4/htmlanimals/kitten.jpg__100x100__crop.jpg" failed (2: No such file or directory), client: 127.0.0.1, server: localhost, request: "GET /animals/kitten.jpg__100x100__crop.jpg HTTP/1.1", upstream: "http://127.0.0.1:8000/animals/kitten.jpg__100x100__crop.jpg", host: "127.0.0.1:80" How do I force Nginx to serve the file relative to the right document root? According to XSendfile documentation the returned path should be relative, so my upstream is doing the right thing.

  Read the article

• How do I fix a corrupt calendar cache?

  - by Blacklight Shining

  I was tailing /var/log/system.log and noticed a sudden wall of text. Looking closer, I saw it was an error CalendarAgent got while trying to save something: Nov 18 11:42:45 rainbow-dash.local CalendarAgent[12321]: CoreData: error: (11) Fatal error. The database at /Users/blackl/Library/Calendars/Calendar Cache is corrupted. SQLite error code:11, 'database disk image is malformed' Nov 18 11:42:45 rainbow-dash.local CalendarAgent[12321]: Core Data: annotation: -executeRequest: encountered exception = Fatal error. The database at /Users/blackl/Library/Calendars/Calendar Cache is corrupted. SQLite error code:11, 'database disk image is malformed' with userInfo = { NSFilePath = "/Users/blackl/Library/Calendars/Calendar Cache"; NSSQLiteErrorDomain = 11; } 2 messages repeated several times Nov 18 11:42:49 rainbow-dash.local CalendarAgent[12321]: [com.apple.calendar.store.log.subscription] [WARNING: CalSubscriptionSession :: persistError :: save failed] This entire sequence is repeated many times throughout the log. file said the file in question was a SQLite 3.x database, so I did a bit of searching and came up with a way to check those. blackl% cp -i ~/Library/Calendars/Calendar\ Cache /tmp blackl% sqlite3 /tmp/Calendar\ Cache SQLite version 3.7.12 2012-04-03 19:43:07 Enter ".help" for instructions Enter SQL statements terminated with a ";" sqlite> pragma integrity_check ; *** in database main *** Main freelist: Bad ptr map entry key=863 expected=(2,0) got=(5,21) On page 21 at right child: 2nd reference to page 863 This is followed by a few dozen lines like these: rowid <number> missing from index <name> and then: wrong # of entries in index <name> I'm at a bit of a loss as to what to do now—I couldn't find anything on how to fix the errors that I found. Also, it would probably be a good idea to disable Calendar Agent so it doesn't try to use the database while it's being fixed (that's why I copied it to /tmp before running sqlite3 on it.) How do I disable CalendarAgent and fix its cache?

  Read the article

• Apache wont start after attempting to install SSL

  - by yummm

  Below is what my VirtualHosts look like in httpd.conf <VirtualHost *:80> # Admin email, Server Name (domain name) and any aliases ServerAdmin [email protected] ServerName mydomain.com ServerAlias www.mydomain.com # Index file and Document Root (where the public files are located) DirectoryIndex index.php DocumentRoot /home/mydomain/public_html/mydomain.com/public # Custom log file locations LogLevel warn ErrorLog /home/mydomain/public_html/mydomain.com/log/error.log CustomLog /home/mydomain/public_html/mydomain.com/log/access.log combined </VirtualHost> <VirtualHost *:443> SSLEngine on SSLCertificateFile /etc/httpd/conf/ssl.crt/mydomain.com.crt SSLCertificateKeyFile /etc/httpd/conf/ssl.key/mydomain.com.key ServerName mydomain.com DirectoryIndex index.php DocumentRoot /home/mydomain/public_html/mydomain.com/public </VirtualHost> I'm using the latest version of Apache on CentOS and there isn't any error being generated. Apache just will not start. Any ideas what I'm doing wrong? UPDATE - Found these messages in the error log: [Tue Mar 16 02:07:57 2010] [error] Init: Private key not found [Tue Mar 16 02:07:57 2010] [error] SSL Library Error: 218710120 error:0D094068:asn1 encoding routines:d2i_ASN1_SET:bad tag [Tue Mar 16 02:07:57 2010] [error] SSL Library Error: 218529960 error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag [Tue Mar 16 02:07:57 2010] [error] SSL Library Error: 218595386 error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 error [Tue Mar 16 02:07:57 2010] [error] SSL Library Error: 218734605 error:0D09A00D:asn1 encoding routines:d2i_PrivateKey:ASN1 lib

  Read the article

• fatal error 'stdio.h' Python 2.7 on Mc OS X 10.7.5 [closed]

  - by DjangoRocks

  I have this weird issue on my Mac OS X 10.7.5 /Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33:10: fatal error: 'stdio.h' file not found What caused the above error? This error has been bugging me and i can't install mysql-python as i'm stuck with this step. I'm using Python 2.7.3. Things like Google App Engine ( python ), python script, tornado generally works on my mac. But not mysql-python. I've install MySQL using the dmg image and have copied the mysql folder to /usr/local/ How do i fix this? ======UPDATE====== I've ran the command, and tried to install mysql-python by running sudo python setup.py install. But received the following: running install running bdist_egg running egg_info writing MySQL_python.egg-info/PKG-INFO writing top-level names to MySQL_python.egg-info/top_level.txt writing dependency_links to MySQL_python.egg-info/dependency_links.txt writing MySQL_python.egg-info/PKG-INFO writing top-level names to MySQL_python.egg-info/top_level.txt writing dependency_links to MySQL_python.egg-info/dependency_links.txt reading manifest file 'MySQL_python.egg-info/SOURCES.txt' reading manifest template 'MANIFEST.in' writing manifest file 'MySQL_python.egg-info/SOURCES.txt' installing library code to build/bdist.macosx-10.6-intel/egg running install_lib running build_py copying MySQLdb/release.py -> build/lib.macosx-10.6-intel-2.7/MySQLdb running build_ext gcc-4.2 not found, using clang instead building '_mysql' extension clang -fno-strict-aliasing -fno-common -dynamic -g -O2 -DNDEBUG -g -O3 -Dversion_info=(1,2,4,'rc',5) -D__version__=1.2.4c1 -I/usr/local/mysql/include -I/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7 -c _mysql.c -o build/temp.macosx-10.6-intel-2.7/_mysql.o -Os -g -fno-common -fno-strict-aliasing -arch x86_64 In file included from _mysql.c:29: /Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33:10: fatal error: 'stdio.h' file not found #include <stdio.h> ^ 1 error generated. error: command 'clang' failed with exit status 1 What other possible ways can i fix it? thanks! Best Regards.

  Read the article

• How to install RMagick RubyGem on Mac OS X 10.6 Snow Leopard?

  - by misbehavens

  I am getting this error while trying to install RMagick: $ sudo gem install rmagick Building native extensions. This could take a while... ERROR: Error installing rmagick: ERROR: Failed to build gem native extension. /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/bin/ruby extconf.rb checking for Ruby version >= 1.8.5... yes checking for gcc... yes checking for Magick-config... no Can't install RMagick 2.13.1. Can't find Magick-config in /usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin:/opt/local/bin:/usr/local/git/bin:~/bin:/usr/local/bin:/usr/local/mysql/bin:/usr/local/pear/bin *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Provided configuration options: --with-opt-dir --without-opt-dir --with-opt-include --without-opt-include=${opt-dir}/include --with-opt-lib --without-opt-lib=${opt-dir}/lib --with-make-prog --without-make-prog --srcdir=. --curdir --ruby=/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/bin/ruby Gem files will remain installed in /Library/Ruby/Gems/1.8/gems/rmagick-2.13.1 for inspection. Results logged to /Library/Ruby/Gems/1.8/gems/rmagick-2.13.1/ext/RMagick/gem_make.out How can I install the RMagick RubyGem on Snow Leopard?

  Read the article

• SQLRelay MySQL compatibility layer in php-cgi.

  - by sybreon

  I am investigating the use of sqlrelay as a middle-layer between an application that uses MySQL with a PostgreSQL backend. I assume that this is something that it can do to ease backend migration. But for the moment, I am just experimenting with a MySQL application accessing a MySQL backend through the sqlrelay layer. app => sqlrelay lib => mysql client lib => tcp => mysql server I followed the instructions for the MySQL drop-in replacement and it works. I can connect to the backend MySQL server using both sqlrsh and mysql client application. It will work for most MySQL applications by using LD_PRELOAD with the compatibility layer library. The instructions recommend re-compiling php to support it. I would prefer not doing something so drastic. They also recommend setting the LD_PRELOAD for apachectl as a method for the apache/php stack. However, this does not work with lighttpd/php-cgi. I have wrapped php-cgi with a shell script that sets LD_PRELOAD before running the cgi script. LD_PRELOAD=/usr/lib/libmysql50sqlrelay-0.39.4.so.1 /usr/bin/php5-cgi $@ I can see LD_PRELOAD correctly set in phpinfo() but the cgi scripts all fail and are unable to connect to the database. According to the mysql client, the compatibility library should report itself as a 5.0.0 client but the phpinfo module reports itself as the actual 5.0.51a client library used. This means that the compatibility library was not used. Is there someone who has had some success doing something similar?

  Read the article

• Difference in performance: local machine VS amazon medium instance

  - by user644745

  I see a drastic difference in performance matrix when i run it with apache benchmark (ab) in my local machine VS production hosted in amazon medium instance. Same concurrent requests (5) and same total number of requests (111) has been run against both. Amazon has better memory than my local machine. But there are 2 CPUs in my local machine vs 1 CPU in m1.medium. My internet speed is very low at the moment, I am getting Transfer rate as 25.29KBps. How can I improve the performance ? Do not know how to interpret Connect, Processing, Waiting and total in ab output. Here is Localhost: Server Hostname: localhost Server Port: 9999 Document Path: / Document Length: 7631 bytes Concurrency Level: 5 Time taken for tests: 1.424 seconds Complete requests: 111 Failed requests: 102 (Connect: 0, Receive: 0, Length: 102, Exceptions: 0) Write errors: 0 Total transferred: 860808 bytes HTML transferred: 847155 bytes Requests per second: 77.95 [#/sec] (mean) Time per request: 64.148 [ms] (mean) Time per request: 12.830 [ms] (mean, across all concurrent requests) Transfer rate: 590.30 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 0 0 0.5 0 1 Processing: 14 63 99.9 43 562 Waiting: 14 60 96.7 39 560 Total: 14 63 99.9 43 563 And this is production: Document Path: / Document Length: 7783 bytes Concurrency Level: 5 Time taken for tests: 33.883 seconds Complete requests: 111 Failed requests: 0 Write errors: 0 Total transferred: 877566 bytes HTML transferred: 863913 bytes Requests per second: 3.28 [#/sec] (mean) Time per request: 1526.258 [ms] (mean) Time per request: 305.252 [ms] (mean, across all concurrent requests) Transfer rate: 25.29 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 290 297 14.0 293 413 Processing: 897 1178 63.4 1176 1391 Waiting: 296 606 135.6 588 1171 Total: 1191 1475 66.0 1471 1684

  Read the article

• Server error 500: Undefinable problem with my Zend Framework based site

  - by sanders

  Lately I had to reinstall my development site on my ubuntu machine since my system crashed after an os update. 4 days later my site is still not running as it should. Whenever i do an action which has in it an action on a database, it stops working. For example when Registring a new user, i get the following error: [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP Notice: Trying to get property of non-object in /var/www/nrka2/application/bootstrap/Bootstrap.php on line 169, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP Stack trace:, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 1. {main}() /var/www/nrka2/public/index.php:0, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 2. require() /var/www/nrka2/public/index.php:2, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 3. Zend_Application->bootstrap() /var/www/nrka2/application/application.php:23, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 4. Zend_Application_Bootstrap_BootstrapAbstract->bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application.php:355, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 5. Zend_Application_Bootstrap_BootstrapAbstract->_bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:583, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 6. Zend_Application_Bootstrap_BootstrapAbstract->_executeResource() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:619, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 7. Bootstrap->_initViewSettings() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:666, referer: http://nrka2/user/register [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP Notice: Trying to get property of non-object in /var/www/nrka2/application/bootstrap/Bootstrap.php on line 169, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP Stack trace:, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 1. {main}() /var/www/nrka2/public/index.php:0, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 2. require() /var/www/nrka2/public/index.php:2, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 3. Zend_Application->bootstrap() /var/www/nrka2/application/application.php:23, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 4. Zend_Application_Bootstrap_BootstrapAbstract->bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application.php:355, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 5. Zend_Application_Bootstrap_BootstrapAbstract->_bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:583, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 6. Zend_Application_Bootstrap_BootstrapAbstract->_executeResource() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:619, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 7. Bootstrap->_initViewSettings() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:666, referer: http://nrka2/css/main.css My Bootstrap class looks like this: <?php class Bootstrap extends Zend_Application_Bootstrap_Bootstrap{ /** * * @var unknown_type */ public $frontcontroller; /** * * @var unknown_type */ protected $_logger; /** * * @var unknown_type */ protected $_acl; /** * * @var unknown_type */ protected $_auth; /** * Setup the logging */ protected function _initLogging() { $this->bootstrap('frontController'); $logger = new Zend_Log(); $writer = 'production' == $this->getEnvironment() ? new Zend_Log_Writer_Stream(APPLICATION_PATH . '/../data/logs/app.log') : new Zend_Log_Writer_Firebug(); $logger->addWriter($writer); if ('production' == $this->getEnvironment()) { $filter = new Zend_Log_Filter_Priority(Zend_Log::CRIT); $logger->addFilter($filter); } $this->_logger = $logger; Zend_Registry::set('log', $logger); } protected function _initDefaultModuleAutoloader(){ $this->_logger->info('Bootstrap '. __METHOD__); $this->_resourceLoader = new Zend_Application_Module_Autoloader(array( 'namespace' => 'EventManager', 'basePath' => APPLICATION_PATH . '/modules/eventManager', )); $this->_resourceLoader->addResourceTypes(array( 'modelResource' => array( 'path' => 'models/resources', 'namespace' => 'Resource', ), 'service' => array( 'path' => 'services', 'namespace' => 'Service' ), )); } // @todo develop this function protected function _initDbProfiler(){ $this->_logger->info('Bootstrap ' . __METHOD__); if ('production' !== $this->getEnvironment()) { $this->bootstrap('db'); $profiler = new Zend_Db_Profiler_Firebug('All DB Queries'); $profiler->setEnabled(true); $this->getPluginResource('db')->getDbAdapter()->setProfiler($profiler); } } /** * Add Controller Action Helpers */ protected function _initActionHelpers() { $this->_logger->info('Bootstrap ' . __METHOD__); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_Acl()); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_RedirectCommon()); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_Service()); } /** * * @return unknown_type */ protected function _initRoutes(){ $this->_logger->info('Initialize Routes '. __METHOD__); $this->bootstrap('frontController'); $router = $this->frontController->getRouter(); $route = new Zend_Controller_Router_route( 'register', array( 'controller' => 'user', 'action' => 'register' ) ); $router->addRoute('register',$route); $route = new Zend_Controller_Router_route( 'login', array( 'controller' => 'user', 'action' => 'login' ) ); $router->addRoute('login',$route); $route = new Zend_Controller_Router_route( 'logout', array( 'controller' => 'user', 'action' => 'logout' ) ); $router->addRoute('logout',$route); } /** * * @return void */ protected function _initLocale(){ $this->_logger->info('Bootstrap '.__METHOD__); $locale = new Zend_Locale('nl_NL'); Zend_Registry::set('Zend_Locale', $locale); } protected function _initAcl(){ $this->_acl = new EventManager_Service_Acl(); } /** * * @return void */ protected function _initViewSettings(){ $this->_logger->info('Bootstrap '.__METHOD__); $this->bootstrap('view'); $this->bootstrap('Acl'); $this->_view = $this->getResource('view'); //set encoding and doctype $this->_view->setEncoding('UTF-8'); $this->_view->doctype('XHTML1_STRICT'); $this->_view->headMeta()->appendHttpEquiv('Content-Type', 'text/html; charset=UTF-8'); $this->_view->headMeta()->appendHttpEquiv('Content-Language', 'en-US'); //@todo op een later moment moeten hier nog de stylesheets worden toegevoegd $this->_view->headLink()->appendStylesheet('/css/main.css'); //$this->_view->headTitle('Event Manager'); /* Set the head style. $this->_view->headTitle->headStyle(); */ $this->_view->headTitle()->setSeparator(' - '); $this->_auth = Zend_Auth::getInstance(); $navigation = new Zend_Config_Xml(APPLICATION_PATH.'/configs/navigation.xml','nav'); $navContainer = new Zend_Navigation($navigation); $this->_view->navigation($navContainer)->setAcl($this->_acl)->setRole($this->_auth->getStorage()->read()->usr_role); //THIS IS LINE 169!!!!!!!!! } /** * Add graceful error handling to the dispatch, this will handle * errors during Front Controller dispatch. */ public function run() { $errorHandling = $this->getOption('errorhandling'); try { parent::run(); } catch(Exception $e) { if (true == (bool) $errorHandling['graceful']) { $this->__handleErrors($e, $errorHandling['email']); } else { throw $e; } } } /** * Handle errors gracefully, this will work as long as the views, * and the Zend classes are available * * @param Exception $e * @param string $email */ protected function __handleErrors(Exception $e, $email) { header('HTTP/1.1 500 Internal Server Error'); $view = new Zend_View(); $view->addScriptPath(dirname(__FILE__) . '/../views/scripts'); echo $view->render('fatalError.phtml'); if ('' != $email) { $mail = new Zend_Mail(); $mail->setSubject('Fatal error in application Storefront'); $mail->addTo($email); $mail->setBodyText( $e->getFile() . "\n" . $e->getMessage() . "\n" . $e->getTraceAsString() . "\n" ); @$mail->send(); } } } I have tried to debug my code, but everyting goes well until I do somethign with the db. But I don't know what goes wrong with the db. I don't get any clear error messages. Can someone help me? Some more possible interesting data: [bootstrap] resources.db.adapter = "PDO_MYSQL" resources.db.isdefaulttableadapter = true resources.db.params.dbname = "ladosa" resources.db.params.username = "root" resources.db.params.password = "root" resources.db.params.hostname = "localhost" resources.db.params.charset = "UTF8" resources.db.params.profiler.enabled = true resources.db.params.profiler.class = Zend_Db_Profiler_Firebug Autoloadernamespaces[] = "Zend_" Autoloadernamespaces[] = "SF_" phpsettings.display_errors = 0 phpsettings.error_reporting = 8191 phpSettings.date.timezone = "Europe/Amsterdam" bootstrap.path = APPLICATION_PATH"/bootstrap/Bootstrap.php" pluginPaths.resource_ = APPLICATION_PATH"/resources" resources.frontcontroller.moduledirectory = APPLICATION_PATH"/modules" resources.frontcontroller.defaultmodule = "eventManager" resources.frontcontroller.params.prefixDefaultModule = true resources.frontcontroller.exceptions = false resources.view[] = "" resources.layout.layoutPath = APPLICATION_PATH "/layouts/scripts" resources.view.encoding = "UTF-8" resources.view.title = Rode kruis Vrijwilligers applicatie ;resources.view.helperPath.Default_View_Helper = APPLICATION_PATH "/modules/eventManager/views/helpers" resources.layout.layout = "main" [production:bootstrap] [development:bootstrap] ;resources.frontController.throwExceptions = 1 ;phpSettings.display_startup_errors=1 ;phpSettings.display_errors = 1 ;resources.frontcontroller.throwerrors = [test:production] btw. I CAN login to my database command line with the given username and password. Update: today i decided to investigate on my http request and i came to an error 500. My apache logs don't give any related information, I think. I posted the logs above. Any idea's?

  Read the article

• Server error 500: Undefinable problem with my Zend Framework based site

  - by sanders

  Hello everyone, Lately I had to reinstall my development site on my ubuntu machine since my system crashed after an os update. 4 days later my site is still not running as it should. Whenever i do an action which has in it an action on a database, it stops working. For example when Registring a new user, i get the following error: [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP Notice: Trying to get property of non-object in /var/www/nrka2/application/bootstrap/Bootstrap.php on line 169, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP Stack trace:, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 1. {main}() /var/www/nrka2/public/index.php:0, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 2. require() /var/www/nrka2/public/index.php:2, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 3. Zend_Application->bootstrap() /var/www/nrka2/application/application.php:23, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 4. Zend_Application_Bootstrap_BootstrapAbstract->bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application.php:355, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 5. Zend_Application_Bootstrap_BootstrapAbstract->_bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:583, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 6. Zend_Application_Bootstrap_BootstrapAbstract->_executeResource() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:619, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 7. Bootstrap->_initViewSettings() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:666, referer: http://nrka2/user/register [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP Notice: Trying to get property of non-object in /var/www/nrka2/application/bootstrap/Bootstrap.php on line 169, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP Stack trace:, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 1. {main}() /var/www/nrka2/public/index.php:0, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 2. require() /var/www/nrka2/public/index.php:2, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 3. Zend_Application->bootstrap() /var/www/nrka2/application/application.php:23, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 4. Zend_Application_Bootstrap_BootstrapAbstract->bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application.php:355, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 5. Zend_Application_Bootstrap_BootstrapAbstract->_bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:583, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 6. Zend_Application_Bootstrap_BootstrapAbstract->_executeResource() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:619, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 7. Bootstrap->_initViewSettings() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:666, referer: http://nrka2/css/main.css My Bootstrap class looks like this: <?php class Bootstrap extends Zend_Application_Bootstrap_Bootstrap{ /** * * @var unknown_type */ public $frontcontroller; /** * * @var unknown_type */ protected $_logger; /** * * @var unknown_type */ protected $_acl; /** * * @var unknown_type */ protected $_auth; /** * Setup the logging */ protected function _initLogging() { $this->bootstrap('frontController'); $logger = new Zend_Log(); $writer = 'production' == $this->getEnvironment() ? new Zend_Log_Writer_Stream(APPLICATION_PATH . '/../data/logs/app.log') : new Zend_Log_Writer_Firebug(); $logger->addWriter($writer); if ('production' == $this->getEnvironment()) { $filter = new Zend_Log_Filter_Priority(Zend_Log::CRIT); $logger->addFilter($filter); } $this->_logger = $logger; Zend_Registry::set('log', $logger); } protected function _initDefaultModuleAutoloader(){ $this->_logger->info('Bootstrap '. __METHOD__); $this->_resourceLoader = new Zend_Application_Module_Autoloader(array( 'namespace' => 'EventManager', 'basePath' => APPLICATION_PATH . '/modules/eventManager', )); $this->_resourceLoader->addResourceTypes(array( 'modelResource' => array( 'path' => 'models/resources', 'namespace' => 'Resource', ), 'service' => array( 'path' => 'services', 'namespace' => 'Service' ), )); } // @todo develop this function protected function _initDbProfiler(){ $this->_logger->info('Bootstrap ' . __METHOD__); if ('production' !== $this->getEnvironment()) { $this->bootstrap('db'); $profiler = new Zend_Db_Profiler_Firebug('All DB Queries'); $profiler->setEnabled(true); $this->getPluginResource('db')->getDbAdapter()->setProfiler($profiler); } } /** * Add Controller Action Helpers */ protected function _initActionHelpers() { $this->_logger->info('Bootstrap ' . __METHOD__); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_Acl()); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_RedirectCommon()); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_Service()); } /** * * @return unknown_type */ protected function _initRoutes(){ $this->_logger->info('Initialize Routes '. __METHOD__); $this->bootstrap('frontController'); $router = $this->frontController->getRouter(); $route = new Zend_Controller_Router_route( 'register', array( 'controller' => 'user', 'action' => 'register' ) ); $router->addRoute('register',$route); $route = new Zend_Controller_Router_route( 'login', array( 'controller' => 'user', 'action' => 'login' ) ); $router->addRoute('login',$route); $route = new Zend_Controller_Router_route( 'logout', array( 'controller' => 'user', 'action' => 'logout' ) ); $router->addRoute('logout',$route); } /** * * @return void */ protected function _initLocale(){ $this->_logger->info('Bootstrap '.__METHOD__); $locale = new Zend_Locale('nl_NL'); Zend_Registry::set('Zend_Locale', $locale); } protected function _initAcl(){ $this->_acl = new EventManager_Service_Acl(); } /** * * @return void */ protected function _initViewSettings(){ $this->_logger->info('Bootstrap '.__METHOD__); $this->bootstrap('view'); $this->bootstrap('Acl'); $this->_view = $this->getResource('view'); //set encoding and doctype $this->_view->setEncoding('UTF-8'); $this->_view->doctype('XHTML1_STRICT'); $this->_view->headMeta()->appendHttpEquiv('Content-Type', 'text/html; charset=UTF-8'); $this->_view->headMeta()->appendHttpEquiv('Content-Language', 'en-US'); //@todo op een later moment moeten hier nog de stylesheets worden toegevoegd $this->_view->headLink()->appendStylesheet('/css/main.css'); //$this->_view->headTitle('Event Manager'); /* Set the head style. $this->_view->headTitle->headStyle(); */ $this->_view->headTitle()->setSeparator(' - '); $this->_auth = Zend_Auth::getInstance(); $navigation = new Zend_Config_Xml(APPLICATION_PATH.'/configs/navigation.xml','nav'); $navContainer = new Zend_Navigation($navigation); $this->_view->navigation($navContainer)->setAcl($this->_acl)->setRole($this->_auth->getStorage()->read()->usr_role); //THIS IS LINE 169!!!!!!!!! } /** * Add graceful error handling to the dispatch, this will handle * errors during Front Controller dispatch. */ public function run() { $errorHandling = $this->getOption('errorhandling'); try { parent::run(); } catch(Exception $e) { if (true == (bool) $errorHandling['graceful']) { $this->__handleErrors($e, $errorHandling['email']); } else { throw $e; } } } /** * Handle errors gracefully, this will work as long as the views, * and the Zend classes are available * * @param Exception $e * @param string $email */ protected function __handleErrors(Exception $e, $email) { header('HTTP/1.1 500 Internal Server Error'); $view = new Zend_View(); $view->addScriptPath(dirname(__FILE__) . '/../views/scripts'); echo $view->render('fatalError.phtml'); if ('' != $email) { $mail = new Zend_Mail(); $mail->setSubject('Fatal error in application Storefront'); $mail->addTo($email); $mail->setBodyText( $e->getFile() . "\n" . $e->getMessage() . "\n" . $e->getTraceAsString() . "\n" ); @$mail->send(); } } } I have tried to debug my code, but everyting goes well until I do somethign with the db. But I don't know what goes wrong with the db. I don't get any clear error messages. Can someone help me? Some more possible interesting data: [bootstrap] resources.db.adapter = "PDO_MYSQL" resources.db.isdefaulttableadapter = true resources.db.params.dbname = "ladosa" resources.db.params.username = "root" resources.db.params.password = "root" resources.db.params.hostname = "localhost" resources.db.params.charset = "UTF8" resources.db.params.profiler.enabled = true resources.db.params.profiler.class = Zend_Db_Profiler_Firebug Autoloadernamespaces[] = "Zend_" Autoloadernamespaces[] = "SF_" phpsettings.display_errors = 0 phpsettings.error_reporting = 8191 phpSettings.date.timezone = "Europe/Amsterdam" bootstrap.path = APPLICATION_PATH"/bootstrap/Bootstrap.php" pluginPaths.resource_ = APPLICATION_PATH"/resources" resources.frontcontroller.moduledirectory = APPLICATION_PATH"/modules" resources.frontcontroller.defaultmodule = "eventManager" resources.frontcontroller.params.prefixDefaultModule = true resources.frontcontroller.exceptions = false resources.view[] = "" resources.layout.layoutPath = APPLICATION_PATH "/layouts/scripts" resources.view.encoding = "UTF-8" resources.view.title = Rode kruis Vrijwilligers applicatie ;resources.view.helperPath.Default_View_Helper = APPLICATION_PATH "/modules/eventManager/views/helpers" resources.layout.layout = "main" [production:bootstrap] [development:bootstrap] ;resources.frontController.throwExceptions = 1 ;phpSettings.display_startup_errors=1 ;phpSettings.display_errors = 1 ;resources.frontcontroller.throwerrors = [test:production] btw. I CAN login to my database command line with the given username and password. Update: today i decided to investigate on my http request and i came to an error 500. My apache logs don't give any related information, I think. I posted the logs above. Any idea's?

  Read the article

• Merge changes in Microsoft Word documents

  - by Álvaro G. Vicario

  I'm using Microsoft Word 2002 to maintain some documentation. The documents are stored in a version control repository (Subversion) together with the source code it documents. My Subversion client (TortoiseSVN) comes with a little VBA script that allows to leverage the built-in revisions feature when merging different branches. In other words, when I want to copy changes from one document to another, Word compares both documents (source and target) and builds a third document that has the contents of the source doc tagged as revisions, so I can then review differences one by one and confirm or discard changes. While this is handy, it also means that making a single change to the source document forces me to review all the differences between both documents and discard all of them except the only actual change. My questions is... Do you know about an application or plug-in that's able to find the differences between two Word documents and apply those differences to a third document? (I know 2002 is very old but that's what my company gives me; I'm open to solutions that use newer versions though.)

  Read the article

• Is there a command like pstree for libraries?

  - by flashnode

  I need to determine whether a library named libunaSA.so is being called directly by the process or by another library called libtoki2.so. I guess what I'm looking for is a pstree for libraries. The system is running RHEL 5.3 Beta. This output shows the two libraries in the process map # grep -e toki -e una /proc/2335/maps 0043f000-004ad000 r-xp 00000000 08:02 543465 /usr/lib/libtoki2.so 004ad000-004c5000 rwxp 0006d000 08:02 543465 /usr/lib/libtoki2.so 01185000-01397000 r-xp 00000000 08:02 543503 /usr/lib/libunaSA.so 01397000-013dc000 rwxp 00211000 08:02 543503 /usr/lib/libunaSA.so This output shows that only the libtoki2.so library is in the current cache # ldconfig -p | grep -e una -e toki libtoki2.so (libc6) => /usr/lib/libtoki2.so libtoki.so.4.4.1 (libc6) => /usr/lib/libtoki.so.4.4.1 libtoki.so.2 (libc6) => /usr/lib/libtoki.so.2 I attached strace to the running process but it doesn't provide much output # strace -p 2335 Process 2335 attached - interrupt to quit futex(0xb7ef5bd8, FUTEX_WAIT, 2336, NULL Here's the output to ldd for each library # ldd /usr/lib/libtoki2.so linux-gate.so.1 => (0x00a0a000) libdl.so.2 => /lib/libdl.so.2 (0x001bd000) libstdc++-libc6.2-2.so.3 => /usr/lib/libstdc++-libc6.2-2.so.3 (0x00f3f000) libm.so.6 => /lib/libm.so.6 (0x00b27000) libc.so.6 => /lib/libc.so.6 (0x0043d000) /lib/ld-linux.so.2 (0x00742000) libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00110000) # ldd /usr/lib/libunaSA.so linux-gate.so.1 => (0x00244000) libpthread.so.0 => /lib/libpthread.so.0 (0x00baf000) libdl.so.2 => /lib/libdl.so.2 (0x007fa000) libstdc++-libc6.2-2.so.3 => /usr/lib/libstdc++-libc6.2-2.so.3 (0x009ce000) libm.so.6 => /lib/libm.so.6 (0x00c96000) libc.so.6 => /lib/libc.so.6 (0x004a2000) /lib/ld-linux.so.2 (0x00742000) libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00a9f000)

  Read the article

• How to disable irritating Office File Validation security alert?

  - by Rabarberski

  I have Microsoft Office 2007 running on Windows 7. Yesterday I updated Office to the latest service pack, i.e. SP3. This morning, when opening an MS Word document (.doc format, and a document I created myself some months ago) I was greeted with a new dialog box saying: Security Alert - Office File Validation WARNING: Office File Validation detected a problem while trying to open this file. Opening this is probably dangerous, and may allow a malicious user to take over your computer. Contact the sender and ask them to re-save and re-send the file. For more security, verify in person or via the phone that they sent the file. Including two links to some microsoft blabla webpage. Obviously the document is safe as I created it myself some months ago. How to disable this irritating dialog box? (On a sidenote, a rethorical question: Will Microsoft never learn? I consider myself a power user in Word, but I have no clue what could be wrong with my document so that it is considered dangerous. Let alone more basic users of Word. Sigh....)

  Read the article

• ProxyPass for specific vhost with mod_rewrite

  - by Steve Robbins

  I have a web server that it set up to dynamically server different document roots for different domains <VirtualHost *:80> <IfModule mod_rewrite.c> # Stage sites :: www.[document root].server.company.com => /home/www/[document root] RewriteCond %{HTTP_HOST} ^www\.[^.]+\.server\.company\.com$ RewriteRule ^(.+) %{HTTP_HOST}$1 [C] RewriteRule ^www\.([^.]+)\.server\.company\.com(.*) /home/www/$1/$2 [L] </IfModule> </VirtualHost> This makes it so that www.foo.server.company.com will serve the document root of server.company.com:/home/www/foo/ For one of these sites, I need to add a ProxyPass, but I only want it to be applied to that one site. I tried something like <VirtualHost *:80> <Directory /home/www/foo> UseCanonicalName Off ProxyPreserveHost On ProxyRequests Off ProxyPass /services http://www-test.foo.com/services ProxyPassReverse /services http://www-test.foo.com/services </Directory> </VirtualHost> But then I get these errors ProxyPreserveHost not allowed here ProxyPass|ProxyPassMatch can not have a path when defined in a location. How can I set up a ProxyPass for a single virtual host?

  Read the article

• AWS elastic load balancer basic issues

  - by Jones

  I have an array of EC2 t1.micro instances behind a load balancer and each node can manage ~100 concurrent users before it starts to get wonky. i would THINK if i have 2 such instances it would allow my network to manage 200 concurrent users... apparently not. When i really slam the server (blitz.io) with a full 275 concurrents, it behaves the same as if there is just one node. it goes from 400ms response time to 1.6 seconds (which for a single t1.micro is expected, but not 6). So the question is, am i simply not doing something right or is ELB effectively worthless? Anyone have some wisdom on this? AB logs: Loadbalancer (3x m1.medium) Document Path: /ping/index.html Document Length: 185 bytes Concurrency Level: 100 Time taken for tests: 11.668 seconds Complete requests: 50000 Failed requests: 0 Write errors: 0 Non-2xx responses: 50001 Total transferred: 19850397 bytes HTML transferred: 9250185 bytes Requests per second: 4285.10 [#/sec] (mean) Time per request: 23.337 [ms] (mean) Time per request: 0.233 [ms] (mean, across all concurrent requests) Transfer rate: 1661.35 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 1 2 4.3 2 63 Processing: 2 21 15.1 19 302 Waiting: 2 21 15.0 19 261 Total: 3 23 15.7 21 304 Single instance (1x m1.medium direct connection) Document Path: /ping/index.html Document Length: 185 bytes Concurrency Level: 100 Time taken for tests: 9.597 seconds Complete requests: 50000 Failed requests: 0 Write errors: 0 Non-2xx responses: 50001 Total transferred: 19850397 bytes HTML transferred: 9250185 bytes Requests per second: 5210.19 [#/sec] (mean) Time per request: 19.193 [ms] (mean) Time per request: 0.192 [ms] (mean, across all concurrent requests) Transfer rate: 2020.01 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 1 9 128.9 3 3010 Processing: 1 10 8.7 9 141 Waiting: 1 9 8.7 8 140 Total: 2 19 129.0 12 3020

  Read the article

• Word 2010 creates multiple processes... sometimes

  - by Bill Sambrone

  I've run into a strange behavior when I migrated our users from Office 2007 / Vista to Office 2010 / Windows 7 (all 32-bit). They use a web based document management system called NetDocuments which stores all their .doc/.docx files. Generally, when they click on a doc from the browser window it fires up Word and opens the doc. Word has an add-in in it from NetDocs as well so it can upload the changed document directly back to the NetDocs server. I get a phone call when Word crashes, and every single time it has crashed I have witnessed multiple winword.exe processes running in task manager. I used process explorer to see what created the process, and it is all Internet Explorer. So far I have rolled them back to IE8 and the problem happens less frequently, but it still happens. When I try to duplicate the problem, I can make it happen sometimes if I open multiple documents very quickly. Using lightning fast alt-tab reflexes, I DO see that a 2nd WinWord process is created when a user clicks on a document, then it closes once the document is open. I think what is happening is that the secondary WinWord process that does some sort of NetDocs voodoo is getting stuck open. This behavior is new to Word 2010 / Windows 7 and google searching isn't coming up with much. I have seen a few posts that this is a known issue in certain circumstances and there is no "fix", but I thought it would good to ask others on this. Thanks!

  Read the article

• Mac OS X: Update Python for Shell

  - by Nathan G.

  So, I see similar questions, but none of the answers work for me. I updated Python to 3.1.3 from 2.6.1. Everything works, except: When I type python into Terminal, I get: Python 2.6.1 (r261:67515, Jun 24 2010, 21:47:49) [GCC 4.2.1 (Apple Inc. build 5646)] on darwin Type "help", "copyright", "credits" or "license" for more information. >>> So, how do I change the version of Python that runs in the Shell? I've tried the script that they provide. It adds their directory to my $PATH, but it still doesn't change the version that'd displayed from Terminal. Here's what I get when I echo $PATH: /Library/Frameworks/Python.framework/Versions/3.1/bin:/Library/Frameworks/Python.framework/Versions/3.1/bin:/Library/Frameworks/Python.framework/Versions/3.1/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin It appears that the script provided has added their directory for every time I ran the script (I tried it a few times, naturally). I'll gives links to caps of what is in the other relevant folders it mentions: /Library/Frameworks/Python.framework/Versions/3.1/bin /usr/local/bin /usr/bin Thakns in advance for any ideas!

  Read the article

< Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >