Search Results

Search found 2066 results on 83 pages for 'cable'.

Page 23/83 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

  • assign auto static ip on ubuntu 10.04

    - by ronakin
    I'm trying to set auto static ip. I've set the content of /etc/network/interfaces to be: auto lo auto eth0 iface eth0 inet static address 192.168.1.2 netmask 255.255.255.0 gateway 192.168.1.1. and /etc/resolv.conf to be: nameserver 192.168.1.1. It seems that the ip address have set successfully. However, when I plug out the lan cable and then plug it back, the ip address is not set. How can I make it automatically set the static ip when the lan cable is connected?

    Read the article

  • MacBook Pro (with DVI) to HDMI, including audio - possible?

    - by Jason
    I have a MacBook Pro with DVI. I'd like to hook it up to my living room TV for movies and such but I want to keep it out of the way. I already have HDMI cables run to the basement where I have a cable box. Is there something I could you to connect the MBP video and audio to HDMI so I only need the one cable to the TV? I'm looking for a quality picture but I don't want to spend a ton of $. I've googled a bit, but I'm looking for some recommendations.

    Read the article

  • Windows 7 Line In Delay Issue

    - by CheeseConQueso
    Not sure if this question should be posted on a different stack exchange site, so if you find that it should not be posted here, please move it. Either way, if you know the solution, please advise. I'm running Windows 7 Pro 32-bit on my Dell Latitude 2100 netbook and I'm having an issue with the line in device/driver/functionality. The device & driver are stock: Driver Date: 7/13/2009 Driver Version: 6.1.7600.16385 I'm almost sure that the manufacturer of the sound card is RealTek. The problem is that there is a delay (when monitoring input) between the source and the speakers. My setup is bass guitar running through a 12' long instrument cable (1/4") with a 1/4" female to 1/8" male adapter into the line in port on the computer. Then the 15' long headphones/line out cable goes into a standard set of powered speakers. How do I get rid of this delay? Thanks for any help.

    Read the article

  • Postfix to deliver mail to a virtual address mailbox

    - by Chloe
    Postfix version 2.6.6, Dovecot Version 2.0.9 I want to setup Postfix + Dovecot. Dovecot seems to be working. I can authenticate. However, the mailbox is empty! Nothing will get delivered! I followed many tutorials on Postfix + Dovecot but they seem to want to complicate things by using Dovecot LDA or MySQL. I just want it to be very simple and having Postfix deliver to the virtual mail boxes are fine. I don't need MySQL either. I already set up a custom password file that Dovecot uses for authentication and I can login to POP3 with SSL. I can see from the logs that Postfix is delivering to the system user accounts (the catch-all), instead of the virtual users that I set up in Dovecot. The SMTP + SSL authentication seems to work also. I can also see from the logs that Dovecot is checking the correct virtual mail folder. I just need to figure out how to get Postfix to deliver to the virtual mail boxes. I have the following which I believe are relevant. Let me know what other settings you need to see: alias_maps = hash:/etc/aliases mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mydomain = xxx.com myhostname = mail.xxx.com mynetworks = 99.99.99.99, 99.99.99.99 myorigin = $mydomain relay_domains = $mydestination, xxx.com, domain2.net, domain3.com sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtpd_recipient_restrictions = reject_non_fqdn_sender reject_non_fqdn_recipient reject_unknown_recipient_domain permit_sasl_authenticated check_relay_domains smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_type = dovecot smtpd_sender_restrictions = check_sender_mx_access cidr:/etc/postfix/bogus_mx reject_invalid_hostname reject_unknown_sender_domain reject_non_fqdn_sender virtual_mailbox_base = /var/spool/vmail virtual_mailbox_domains = xxx.com, domain2.net, domain3.com virtual_minimum_uid = 444 Postfix master.cf: submission inet n - - - - smtpd -o smtpd_tls_security_level=encrypt -o smtpd_sasl_auth_enable=yes -o smtpd_sasl_type=dovecot -o smtpd_sasl_path=private/auth -o smtpd_sasl_security_options=noanonymous -o smtpd_sasl_local_domain=$myhostname -o smtpd_client_restrictions=permit_sasl_authenticated,reject -o smtpd_sender_login_maps=hash:/etc/postfix/virtual -o smtpd_sender_restrictions=reject_sender_login_mismatch -o smtpd_recipient_restrictions=reject_non_fqdn_recipient,reject_unknown_recipient_domain,permit_sasl_authenticated,reject Dovecot related: mail_location = maildir:~/Maildir passdb { args = /etc/dovecot/users.conf driver = passwd-file } service auth { unix_listener /var/spool/postfix/private/auth { mode = 0660 user = postfix } } The virtual mail user: vmail:x:444:99:virtual mail users:/var/spool/vmail:/sbin/nologin Here is the /var/log/maillog when I try to send something to myself: Oct 25 22:10:05 308321 postfix/smtpd[2200]: connect from user-999.cable.mindspring.com[99.99.99.99] Oct 25 22:10:05 308321 postfix/smtpd[2200]: D224BD4753: client=user-999.cable.mindspring.com[99.99.99.99], sasl_method=LOGIN, [email protected] Oct 25 22:10:06 308321 postfix/cleanup[2207]: D224BD4753: message-id=<7DC3C163CFFC483AB6226F8D3D9969D2@dumbopc> Oct 25 22:10:06 308321 postfix/qmgr[2168]: D224BD4753: from=<[email protected]>, size=1385, nrcpt=1 (queue active) Oct 25 22:10:06 308321 postfix/smtpd[2200]: disconnect from user-999.cable.mindspring.com[99.99.99.99] Oct 25 22:10:06 308321 postfix/local[2208]: D224BD4753: to=<[email protected]>, orig_to=<[email protected]>, relay=local, delay=1.1, delays=0.53/0.02/0/0.51, dsn=2.0.0, status=sent (delivered to mailbox) Oct 25 22:10:06 308321 postfix/qmgr[2168]: D224BD4753: removed

    Read the article

  • DVI to HDMI - displaying bad.

    - by TutorialPoint
    I currently have a computer with a ASUS EAH5770 (ATi Radeon HD 5770) 1GB GDDR5 video card, and 4GB ram, 2.6 GHZ i5 processor. I just switched from a DVI (the blue one) to an HDMI cable. (Bigben Flat cable HDMI 1.3c) I use a Samsung SyncMaster 2032 MW, which has a HDMI input. The weird thing is, that my screen is off-the-corner of the tv (so it's too wide) (1920x1080), and windows icons and text are not displaying well, though 1080p videos in YouTube are looking brilliant, just like pictures. So i think it has something to do with Windows. I already have the ATI Catalyst Control Center with the drivers i received with my video card. I do not currently know how to fix these problems. Do i have to reinstall Windows or so? Or is it (hopefully) easier?

    Read the article

  • Best labeler for the server room?

    - by Matt Simmons
    Right now, I've got a Brother P-touch labeler that prints four or five sizes of text on one long label. It has features such as italics and bold. It's...non-ideal. What do you use in your server room? I have heard of labelers that will print vertically as well as horizontally, or which can produce labels for cable management as well. I also think it would be great to be able to produce barcodes for my tapes (LTO-3). So basically, I would like a labeler that prints normal, can print cable labels, and can print barcodes. Unicorn optional. Any ideas, or could you even suggest the best labeler for each solution?

    Read the article

  • High fan speed after return from suspend (on Ubuntu)

    - by Bolo
    Hi, I've got a HP ProBook 5310m laptop with Ubuntu 10.04 (32 bit). When I return from suspend, the fan speed is usually very high: FDTZ sensor reports "90 °C". Yes, the units are wrong, since FDTZ does not report temperature, but fan speed – that's probably just a small bug in reporting. Interestingly, when I plug or unplug the power cable for a moment, the fan speed returns back to normal. My questions: Where can I report this problem? Is it about ACPI support in the kernel? What is the address of the relevant bug tracker? As a workaround for now, how can I programmatically trigger a behavior equivalent to (un)plugging the power cable. More generally, how can I force ACPI to recalculate fan speed? Ideally, I'm looking for something like echo foo > /proc/bar. Thanks in advance!

    Read the article

  • Sound problems in Windows 7

    - by Plastkort
    hi! I hope I reached the correct forum for this question. I have a media computer with a third party audio card (Soundblaster audigy SE) I use a coaxial digital audio cable connected to a Onkyo TX SR508. if I use normal audio, the sound seems very low, I have to set volume atleast to 62 in my amplifier to hear anything, however if I set digital SPDIF I have no means of controlling the audio volume from the PC (only from the amplifier) and this can be nasty if I toggle between movies that uses Digital AC3/THX and movies wihtouth, if I look at movies capable of AC3 the volume gets VERY loud if amp is set to 62, 32 is more than enough volume when using passthrough. so this bothers me is how can I get the same amount of volume with or without digital output? I tried also other soundcards, internal red light Digital audio cable... if I connect to my television I get ok sound on any sound source via HDMI... help :)

    Read the article

  • Computer sending data while turned of

    - by Nicklas Ansman
    I have a some what strange problem (which could have and easy and obvious solution for all I know). My problem is that when I've booted ubuntu (now 10.4 but same problem with 9.10) and turns it off it starts sending a HUGE amount of data via the ethernet cable, so much in fact that my router can't handle it and stops responding. As far as I can tell the computer is completely turned off with no fans spinning. I can add that if I boot windows I do not have this problem, just when exiting ubuntu. There are two "fixes" for my problem: Pull the ethernet cable until the next boot Turn off power to the PSU and wait for the capacitors to unload Is there anyone who knows what could be going on? I'd be happy to post some logs or conf-files. Currently I'm using the ethernet port on my motherboard which is a Asus P6T Deluxe V2 with an updated version of the BIOS (maybe not the latest but since it only happens when I've been in ubuntu I don't wanna mess with the BIOS too much). Regards Nicklas

    Read the article

  • RGB to DVI adapter not working for Projector-to-PC

    - by user897052
    We have a wall-mounted projector (dell 4320) with VGA In and the other end of the cable is RGB. We have an RGB to DVI-I adapter (w/ DIP switches) inorder to plug the cable into a PC (video card has 1 VGA and 1 DVI-I port). We had no problems until recently, when the PCs hard drive crashed. After re-imaging the PC, the computer no longer "sees" the projector (the computer doesn't detect the projector as a second monitor anymore). The PC is an older Dell with an after-market video card and runs win XP. I also tried it on a new HP box (win 7), but had to add a DVI-I to DVI-D adapter. Any ideas?

    Read the article

  • Sony Bravia (KDL-32EX402) audio connection fails

    - by Rasmus
    Hey. I'm having trouble connecting my computers audio to the TV (Sony Bravia KDL-32EX402). I'm using a standard AUX cable (some kind of adapter for L/R to go into the headphone plug on the computer). I'm connecting the other end to the back of the TV, it doesn't actually say "AUDIO IN" but it has to be (is also right below the "HDMI 1 AUDIO IN). When changing to "PC-mode" and setting the audio input to "PC" nothing happens. (but the pictures get's transmitted fine by VGA). I have checked that it's not the PC's headphone port, nor the AUX cable. What to do, what to do ?

    Read the article

  • How do I tell if my firewire connection is running as 400 or 800?

    - by Tom
    I have a MacBook Pro with FireWire 800 and a freecom external harddrive that has USB3, FireWire 400 and 800. I am using a Nikkai FireWire 800 cable that has 800 connector on one end and a 400 connector on the other end. The 800 connector is attached to the MacBook pro and the 400 connector is attached to the freecom drive. Is there any way to tell what connection has been established? I looked at disk utility and it simply said 'FireWire'. Is there a command-line tool that would give more information? If it's 400, I plan to swap the cable for 800 connector at both ends.

    Read the article

  • How to show disconnect network drives

    - by Jake
    Windows 7 and Vista laptops in my company domain has network drives set up by Win2k8 Server GPO. Normally, when the laptops has ethernet cable plugged in before boot, the network drives connect and appear as expected at the end of startup sequence. However, when the laptop has ethernet cable unplugged, the network drives are not connected, which is fine, but the disconnected icons disappear as well. i.e. the drives are not set up. At the end of the startup sequence, upon reaching desktop, the wireless adapters will connect to the network and the laptop will be able to find the network drive. Hence I want the drives to be setup nonetheless, so that the next attempt to connect, say, via a desktop shortcut, will reestablish the network drive connection. How can this be done?

    Read the article

  • Can a switch consume bandwidth?

    - by aashiq
    I have a network with a router and a switch. At first my ISP's optical fiber is connected with media converter input port. Than Ethernet cable (output port of Media converter) is connected with the switch. Then an output Ethernet cable is connected with our inner Microtik router. Then this router is connected with another LAN switch. From this switch we have got every connection other switch. It is our total network structure. Our bandwidth is 2 Mbps. From the 11th of March our MRTG graph shows high all the time even when my all switch is switched off except LAN switch. That's why our line is breaking up (Voice call). How could be it possible? My all PC's bandwidth is limited but when connected PC with media converter directly then the graph shows normal. That's why I can't blame my ISP.

    Read the article

  • Has anyone had luck getting an external hard drive working with a PCMCIA USB card?

    - by Carl
    I would like to know if anyone has had any success in getting and external 2.5" IDE hard drive in an external case (w/USB cable) working when plugged into a PCMCIA USB card. My hard drive doesn't work when plugged into my HT-Link Cardbus/PCMCIA USB 2.0 2-port card (NEC / 32-bit). My MP3 player will work fine when plugged into it. I tried plugging in both of the USB cables that are one one end (Y cable), and it doesn't make a difference. I read the problem may be insufficient power.

    Read the article

  • CPU fan making noise. heat sink or replace...

    - by user32185
    CPU fan is making noise ...i figured out reasons: Cable is hitting the fan causing a vibration. And may be also CPU fan is loose causing vibration... suggest options... i cleaned the fan ...but found that there is no heatsink compound /paste between processor and the fan..is it ok ..should i apply heat sink compound. How to correct the cable vibration... My processor is p4 2.4 ghz motherboard intel 845gvsr if i have to buy new fan ..which brand should i go for ..and estimated cost ?!

    Read the article

  • How to send Bluetooth audio to non-Bluetooth speakers?

    - by wonsungi
    In short, I am looking for a Bluetooth-3.5 mini stereo converter. What is this type of device called, and what are some of the best models (is there a difference in audio quality/lag)? I wish to connect some speakers (Altec Lansing inMotion IM7), which does not support Bluetooth, to my laptop (Lenovo X301) wirelessly. Currently, I can connect my laptop's headphone jack to the AUX jack on my speakers via a mini stereo cable. How do I replace this cable with some type of Bluetooth setup? I am not sure what this Bluetooth device is called. I thought I found something, but it actually does the opposite of what I need (3.5 mini stereo-Bluetooth). (My OS is Vista Enterprise, if that matters)

    Read the article

  • Netgear VPN can't access specific server

    - by Critologist
    I have a Netgear FVS318N configured with a VPN. I'm trying to access my call recorder with the provided software from another office. I've already setup the VPN connection, and it works. I can connect and ping the remote router and a few other things on the network. However, I can't ping or connect to my call recorder. If I move outside of the office network (i.e. connect directly to the cable modem or via a mobile hotspot), I can connect and ping the call recorder just fine. The office has a simple Linksys WRT54G router and is using AT&T Uverse. The remote location is using Charter Cable with a Netgear FVS318N. Has anyone ever encountered anything like this before? I've setup an identical VPN previously for a different client using similar hardware and never encountered this. Thanks in advance!

    Read the article

  • Unable to extend desktop

    - by CSharperWithJava
    I'm trying to hook up my TV to my computer as a gaming/multimedia center but I'm having troubles setting it up. I have a custom built machine running Windows 7 RC. It has an ATI Radeon 4800 video card with 2 dvi output and 1 S-video output. I have an s-video to composite adapter that connects to my tv. (It's an old TV with only Cable, composite, and s-video connections). I can switch the desktop to my TV without a problem, but I can't duplicate or extend my desktop onto it. I've installed the latest drivers and Catalyst Control Center, but it won't let it work any more readily than Windows would. Any suggestions? Would using an s-video cable instead of the adapter change anything? (The only reason I use the adapter is because it came with the graphics card) (Edit) I installed the latest drivers and I can now duplicate the screen (show on one monitor and on the TV), but I still can't extend the desktop.

    Read the article

  • Mini DV and DVI Conversion

    - by Kairan
    Video card is: AMD HD 6950 My video card comes with 1xHDMI, 2xDVI, and 2xMini DV ports. I have always used VGA and DVI only. I have the HDMI already connected. I want to hook up 2 more display. One of the display can take a VGA only, the other is an LCD TV so it has VGA, HDMI, Component. I am wondering: 1) What is the best output port to use for the second two monitors? The miniDV or the DVI? 2) I need to run a long cable maybe 15-25 feet, this might change the answer to question 1, is an HDMI long cable 20+ ft going to be better than a 20ft DVI or miniDV ?

    Read the article

  • Is there a switch that will connect directly to my modem and allow my router to serve only as a WiFi connection?

    - by Abner
    Details . . Devices . Internets -50Mbps Cable Internet Modem - Motorola Surfboard Extreme Router - Netgear WNDR3700v3 Switch - D-Link DGS-1008G Wired Ethernet Cable - Cat6_24Awg_ Device Configuration - Modem\Router\Switch . . Internet Usage . Wired Demand XBOX 360 1 Gaming PC 2 PC - HD video . WiFi Demand 3 android + 1 Laptop for browsing and group video chat simultaneously . . Specifics . I am experiencing problems with network speeds and reliability on both wired and wireless connections. On many occasions I experience WiFi Speeds that vary between the 15mbps to 0.50 mbs (or less) and ping ranging from 15ms to 500ms. These results are from when I notice problems with internet lag and run speedtest.net to get details of problems. I have a stretched out floor-plan and old building materials drastically affecting my cellphone signal strength as well). After Reading the "Known Issues" Section on the webpage below http://www.dd-wrt.com/wiki/index.php/Netgear_WNDR3700#Known_Issues I bought the switch and Cat6 cable to increase speed and relieve stress on router in an attempt to fix the symptoms. I thought I'd use the router in a Modem\Switch\Router configuration. I thought I'd only have to use the router for mobile WiFi connections like android or Laptops when necessary (hopefully eliminating the problem caused by the router when subjected to all those demanding Ethernet connections) When I started unboxing the switch, I noticed the manual of this DGS-1008G shows it being connected in the Modem\Router\Switch order and not in the Modem\Switch\Router configuration I was aiming for. I have not been able to find a solid plan to remedy my specific problem without buying another expensive router. I would like to get the speeds I am paying for without buying another router. (My WiFi Adapters would also need to be updated if new router is required, meaning more $$$). I can always sell the switch and get a better one that will bypass the router because my most demanding internet connections are Wired. . . Questions Can I accomplish a Modem\Switch\Router configuration with current switch? Is there a different way to get the wired speed I need while providing WiFi only when necessary? . .

    Read the article

  • How do I hookup a dual video card Crossfire rig to a single monitor?

    - by Alexed
    I just received a new Alienware box preinstalled with two nice shiny ATI 6950 graphics cards. My goal is to use both of them to give me really good resolution and frame rate on my single monitor. There's zero documentation with the Alienware box and nothing I can find online. Do I just plug the monitor into one of the cards, and expect the two cards to do magic internally? The ATI Crossfire website indicates a need for an "external crossfirex connection cable". Do I need to buy one of these? If so, what kind of cable is it? The AMD Catalyst Control Center shows the second card as "Linked" but when I go to the AMD Overdrive section, the second card is at zero temperature, and clock, suggesting it's not actually doing anything. What do I need to do to make use of both cards? Is it something that doesn't kick in until I do something graphically intensive?

    Read the article

  • Do 24pin motherboard wires have to be in a certain order?

    - by jasondavis
    I am wanting to sleeve all the wires in my new PC. On my 24pin motherboard connection cable, I must remove the end plastic connector piece from all the wires to sleeve them all individually. I have a couple questions about this cable though. 1) When I put all the wires back into the connector, must they be in the same order they are in now? 2) I have taken a low quality iphone photo below so you cannot see to well, but in a couple spots I marked with arrows, there is actually 2 wires going into a single slot. I am not sure what to do with those, do all 24pin motherboard connectors have some slots where 2 wires go in like that?

    Read the article

  • How can you convert audio (3.5mm) to S/PDIF?

    - by SSumner
    I have a monitor that I want to use as my 'TV' for my gaming system. I connect it via HDMI, so sound and video go through the monitor, but I want sound to my headphones, which travels via optical (S/PDIF) cable. The monitor (Dell U2713HM) has a 3.5mm audio jack on it for line out, but I couldn't find anything that simply plugs in an converts the analog audio signal to a digital one so I can plug in a S/PDIF cable. What sort of device do I need to do this? (I am not asking for shopping recommendations, merely what options allow this conversion. I would prefer the smallest option, as space is limited).

    Read the article

  • Browsing is much slower on one PC wired to the same router - why?

    - by deanalt
    Wife is not happy. It takes about 5 seconds to open a google window, versus about 1 second on the faster computer which is about 3 years old itself. Yes, it is an older computer (5 -6 years old, I'd guess), surely with less RAM, but for simple browsing, should it matter? Both are hardwired to the same Netgear Rangemax router. Both use fixed IP addresses. Both are XP. Both have about 8 feet of cable to the router. I have the fastest service my cable provides. Probably irrelevant but ...two newer MACs are connected wirelessely during the summer and they are even faster, but I think that's the difference in browsers. If you could point me to a list of process of elimination steps that would be most appreciated. Thanks Dean

    Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >