Search Results

Search found 562 results on 23 pages for 'malcolm jones'.

Page 23/23 | < Previous Page | 19 20 21 22 23 

  • Looking Back at MIX10

    - by WeigeltRo
    It’s the sad truth of my life that even though I’m fascinated by airplanes and flight in general since my childhood days, my body doesn’t like flying. Even the ridiculously short flights inside Germany are taking their toll on me each time. Now combine this with sitting in the cramped space of economy class for many hours on a transatlantic flight from Germany to Las Vegas and back, and factor in some heavy dose of jet lag (especially on my way eastwards), and you get an idea why after coming back home I had this question on my mind: Was it really worth it to attend MIX10? This of course is a question that will also be asked by my boss at Comma Soft (for other reasons, obviously), who decided to send me and my colleague Jens Schaller, to the MIX10 conference. (A note to my German readers: An dieser Stelle der Hinweis, dass Comma Soft noch Silverlight-Entwickler und/oder UI-Designer für den Standort Bonn sucht – aussagekräftige Bewerbungen bitte an [email protected]) Too keep things short: My answer is yes. Before I’ll go into detail, let me ask the heretical questions whether tech conferences in general still make sense. There was a time, where actually being at a tech conference gave you a head-start in regard to learning about new technologies. Nowadays this is no longer true, where every bit of information and every detail is immediately twittered, blogged and whatevered to death. In the case of MIX10 you even can download the video-taped sessions shortly after. So: Does visiting a conference still make sense? It depends on what you expect from a conference. It should be clear to everybody that you’ll neither get exclusive information, nor receive training in a small group. What a conference does offer that sitting in front of your computer does not can be summarized as follows: Focus Being away from work and home will help you to focus on the presented information. Of course there are always the poor guys who are haunted by their work (with mails and short text messages reporting the latest showstopper problem), but in general being out of your office makes a huge difference. Inspiration With the focus comes the emotional involvement. I find it much easier to absorb information if I feel that certain vibe when sitting in a session. This still means that I have put work into reviewing the information later, but it’s a better starting point. And all the impressions collected at a (good) conference combined lead to a higher motivation – be it by the buzz (“this is gonna be sooo cool!”) or by the fear to fall behind (“man, we’ll have work on this, or else…”). People At a conference it’s pretty easy to get into contact with other people during breakfast, lunch and other breaks. This is a good opportunity to get a feel for what other development teams are doing (on a very general level of course, nobody will tell you about their secret formula) and what they are thinking about specific technologies. So MIX10 did offer focus, inspiration and people, but that would have meant nothing without valuable content. When I (being a frontend developer with a strong interest in UI/UX) planned my visit to MIX10, I made the decision to focus on the "soft" topics of design, interaction and user experience. I figured that I would be bombarded with all the technical details about Silverlight 4 anyway in the weeks and months to come. Actually, I would have liked to catch a few technical sessions, but the agenda wasn’t exactly in favor of people interested in any kind of Silverlight and UI/UX/Design topics. That’s one of my few complaints about the conference – I would have liked one more day and/or more sessions per day. Overall, the quality of the workshops and sessions was pretty high. In fact, looking back at my collection of conferences I’ve visited in the past I’d say that MIX10 ranks somewhere near the top spot. Here’s an overview of the workshops/sessions I attended (I’ll leave out the keynotes): Day 0 (Workshops on Sunday) Design Fundamentals for Developers Robby Ingebretsen is the man! Great workshop in three parts with the perfect mix of examples, well-structured definition of terminology and the right dose of humor. Robby was part of the WPF team before founding his own company so he not only has a strong interest in design (and the skillz!) but also the technical background.   Design Tools and Techniques Originally announced to be held by Arturo Toledo, the Rosso brothers from ArcheType filled in for the first two parts, and Corrina Black had a pretty general part about the Windows Phone UI. The first two thirds were a mixed bag; the two guys definitely knew what they were talking about, and the demos were great, but the talk lacked the preparation and polish of a truly great presentation. Corrina was not allowed to go into too much detail before the keynote on Monday, but the session was still very interesting as it showed how much thought went into the Windows Phone UI (and there’s always a lot to learn when people talk about their thought process). Day 1 (Monday) Designing Rich Experiences for Data-Centric Applications I wonder whether there was ever a test-run for this session, but what Ken Azuma and Yoshihiro Saito delivered in the first 15 minutes of a 30-minutes-session made me walk out. A commercial for a product (just great: a video showing a SharePoint plug-in in an all-Japanese UI) combined with the most generic blah blah one could imagine. EPIC FAIL.   Great User Experiences: Seamlessly Blending Technology & Design I switched to this session from the one above but I guess I missed the interesting part – what I did catch was what looked like a “look at the cool stuff we did” without being helpful. Or maybe I was just in a bad mood after the other session.   The Art, Technology and Science of Reading This talk by Kevin Larson was very interesting, but was more a presentation of what Microsoft is doing in research (pretty impressive) and in the end lacked a bit the helpful advice one could have hoped for.   10 Ways to Attack a Design Problem and Come Out Winning Robby Ingebretsen again, and again a great mix of theory and practice. The clean and simple, yet effective, UI of the reader app resulted in a simultaneous “wow” of Jens and me. If you’d watch only one session video, this should be it. Microsoft has to bring Robby back next year! Day 2 (Tuesday) Touch in Public: Multi-touch Interaction Design for Kiosks & Architectural Experiences Very interesting session by Jason Brush, a great inspiration with many details to look out for in the examples. Exactly what I was hoping for – and then some!   Designing Bing: Heart and Science How hard can it be to design the UI for a search engine? An input field and a list of results, that should be it, right? Well, not so fast! The talk by Paul Ray showed the many iterations to finally get it right (up to the choice of a specific blue for the links). And yes, I want an eye-tracking device to play around with!   The Elephant in the Room When Nishant Kothary presented a long list of what his session was not about, I told to myself (not having the description text present) “Am I in the wrong talk? Should I leave?”. Boy, was I wrong. A great talk about human factors in the process of designing stuff.   An Hour with Bill Buxton Having seen Bill Buxton’s presentation in the keynote, I just had to see this man again – even though I didn’t know what to expect. Being more or less unplanned and intended to be more of a conversation, the session didn’t provide a wealth of immediately useful information. Nevertheless Bill Buxton was impressive with his huge knowledge of seemingly everything. But this could/should have been a session some when in the evening and not in parallel to at least two other interesting talks. Day 3 (Wednesday) Design the Ordinary, Like the Fixie This session by DL Byron and Kevin Tamura started really well and brought across the message to keep things simple. But towards the end the talk lost some of its steam. And, as a member of the audience pointed out, they kind of ignored their own advice when they used a fancy presentation software other then PowerPoint that sometimes got in the way of showing things.   Developing Natural User Interfaces Speaking of alternative presentation software, Joshua Blake definitely had the most remarkable alternative to PowerPoint, a self-written program called NaturalShow that was controlled using multi-touch on a touch screen. Not a PowerPoint-killer, but impressive nevertheless. The (excellent) talk itself was kind of eye-opening in regard to what “multi-touch support” on various platforms (WPF, Silverlight, Windows Phone) actually means.   Treat your Content Right The talk by Tiffani Jones Brown wasn’t even on my planned schedule, but somehow I ended up in that session – and it was great. And even for people who don’t necessarily have to write content for websites, some points made by Tiffani are valid in many places, notably wherever you put texts with more than a single word into your UI. Creating Effective Info Viz in Microsoft Silverlight The last session of MIX10 I attended was kind of disappointing. At first things were very promising, with Matthias Shapiro giving a brief but well-structured introduction to info graphics and interactive visualizations. Then the live-coding began and while the result was interesting, too much time was spend on wrestling to get the code working. Ending earlier than planned, the talk was a bit light on actual content, but at least it included a nice list of resources. Conclusion It could be felt all across MIX10, UIs will take a huge leap forward; in fact, there are enough examples that have already. People who both have the technical know-how and at least a basic understanding of design (“literacy” as Bill Buxton called it) are in high demand. The concept of the MIX conference and initiatives like design.toolbox shows that Microsoft understands very well that frontend developers have to acquire new knowledge besides knowing how to hack code and putting buttons on a form. There are extremely exciting times before us, with lots of opportunity for those who are eager to develop their skills, that is for sure.

    Read the article

  • CodePlex Daily Summary for Saturday, June 09, 2012

    CodePlex Daily Summary for Saturday, June 09, 2012Popular ReleasesARCBots API Program: ARCBots API Program v3 STABLE: Stable Release, you can find the update notes in the source code.Microsoft SQL Server Product Samples: Database: AdventureWorks Sample Reports 2008 R2: AdventureWorks Sample Reports 2008 R2.zip contains several reports include Sales Reason Comparisons SQL2008R2.rdl which uses Adventure Works DW 2008R2 as a data source reference. For more information, go to Sales Reason Comparisons report.RULI Chain Code Image Generator: RULI Chain Code BW Image Generator v. 0.4: added features: - 3x3 bitmask support - 7x7 bitmask support - app icon added some refactoring for later library-creationThe Chronicles of Asku: Alpha Test v1.1: Welcome to the Chronicles of Asku alpha test. The current state of the game is 2 tomb floors, level 10 cap, and almost all core systems in the game, excluding a store that you buy armor in. This is just a test for downloading the game, and severe bug hunts... INSTRUCTIONS: When you download the folder, right click within the folder and select EXTRACT ALL Run Setup.exe Follow any on screen instructions DO NOT TRY TO LOAD A CHARACTER IF YOU HAVE NEVER SAVED ONE BEFORE Patch 1.1 -Added a...Json.NET: Json.NET 4.5 Release 7: Fix - Fixed Metro build to pass Windows Application Certification Kit on Windows 8 Release Preview Fix - Fixed Metro build error caused by an anonymous type Fix - Fixed ItemConverter not being used when serializing dictionaries Fix - Fixed an incorrect object being passed to the Error event when serializing dictionaries Fix - Fixed decimal properties not being correctly ignored with DefaultValueHandlingLINQ Extensions Library: 1.0.3.0: New to release 1.0.3.0:Combinatronics: Combinations (unique) Combinations (with repetition) Permutations (unique) Permutations (with repetition) Convert jagged arrays to fixed multidimensional arrays Convert fixed multidimensional arrays to jagged arrays ElementAtMax ElementAtMin ElementAtAverage New set of array extension (1.0.2.8):Rotate Flip Resize (maintaing data) Split Fuse Replace Append and Prepend extensions (1.0.2.7) IndexOf extensions (1.0.2.7) Ne...Audio Pitch & Shift: Audio Pitch And Shift 4.5.0: Added Instruments tab for modules Open folder content feature Some bug fixesPython Tools for Visual Studio: 1.5 Beta 1: We’re pleased to announce the release of Python Tools for Visual Studio 1.5 Beta. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including: • Supports CPython, IronPython, Jython and PyPy • Python editor with advanced member, signature intellisense and refactoring • Code navigation: “Find all refs”, goto definition, and object browser • Local and remote debugging •...Circuit Diagram: Circuit Diagram 2.0 Beta 1: New in this release: Automatically flip components when placing Delete components using keyboard delete key Resize document Document properties window Print document Recent files list Confirm when exiting with unsaved changes Thumbnail previews in Windows Explorer for CDDX files Show shortcut keys in toolbox Highlight selected item in toolbox Zoom using mouse scroll wheel while holding down ctrl key Plugin support for: Custom export formats Custom import formats Open...Umbraco CMS: Umbraco CMS 5.2 Beta: The future of Umbracov5 represents the future architecture of Umbraco, so please be aware that while it's technically superior to v4 it's not yet on a par feature or performance-wise. What's new? For full details see our http://progress.umbraco.org task tracking page showing all items complete for 5.2. In a nutshellPackage Builder Starter Kits Dynamic Extension Methods Querying / IsHelpers Friendly alt template URLs Localization Various bug fixes / performance enhancements Gett...JayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.0.5: JayData is a unified data access library for JavaScript developers to query and update data from different sources like WebSQL, IndexedDB, OData, Facebook or YQL. See it in action in this 6 minutes video New features in JayData 1.0.5http://jaydata.org/blog/jaydata-1.0.5-is-here-with-authentication-support-and-more http://jaydata.org/blog/release-notes Sencha Touch 2 module (read-only)This module can be used to bind data retrieved by JayData to Sencha Touch 2 generated user interface. (exam...32feet.NET: 3.5: This version changes the 32feet.NET library (both desktop and NETCF) to use .NET Framework version 3.5. Previously we compiled for .NET v2.0. There are no code changes from our version 3.4. See the 3.4 release for more information. Changes due to compiling for .NET 3.5Applications should be changed to use NET/NETCF v3.5. Removal of class InTheHand.Net.Bluetooth.AsyncCompletedEventArgs, which we provided on NETCF. We now just use the standard .NET System.ComponentModel.AsyncCompletedEvent...DotNetNuke® Links: 06.02.01: Added new DNN 6.2.0 beta social feature "friends" BugfixesApplication Architecture Guidelines: Application Architecture Guidelines 3.0.7: 3.0.7Jolt Environment: Jolt v2 Stable: Many new features. Follow development here for more information: http://www.rune-server.org/runescape-development/rs-503-client-server/projects/298763-jolt-environment-v2.html Setup instructions in downloadSharePoint Euro 2012 - UEFA European Football Predictor: havivi.euro2012.wsp (1.5): New fetures:Multilingual Support Max users property in Standings Web Part Games time zone change (UTC +1) bug fix - Version 1.4 locking problem http://euro2012.codeplex.com/discussions/358262 bug fix - Field Title not found (v.1.3) German SP http://euro2012.codeplex.com/discussions/358189#post844228 Bug fix - Access is denied.for users with contribute rights Bug fix - Installing on non-English version of SharePoint Bug fix - Title Rules Installing SharePoint Euro 2012 PredictorSharePoint E...myManga: myManga v1.0.0.4: ChangeLogUpdating from Previous Version: Extract contents of Release - myManga v1.0.0.4.zip to previous version's folder. Replaces: myManga.exe BakaBox.dll CoreMangaClasses.dll Manga.dll Plugins/MangaReader.manga.dll Plugins/MangaFox.manga.dll Plugins/MangaHere.manga.dll Plugins/MangaPanda.manga.dllMVVM Light Toolkit: V4RC (binaries only) including Windows 8 RP: This package contains all the latest DLLs for MVVM Light V4 RC. It includes the DLLs for Windows 8 Release Preview. An updated Nuget package is also available at http://nuget.org/packages/MvvmLightLibsPreviewExtAspNet: ExtAspNet v3.1.7: +2012-06-03 v3.1.7 -?????????BUG,??????RadioButtonList?,AJAX????????BUG(swtseaman、????)。 +?Grid?BoundField、HyperLinkField、LinkButtonField、WindowField??HtmlEncode?HtmlEncodeFormatString(TiDi)。 -HtmlEncode?HtmlEncodeFormatString??????true,??????HTML????????。 -??????Asp.Net??GridView?BoundField?????????。 -http://msdn.microsoft.com/en-us/library/system.web.ui.webcontrols.boundfield.htmlencode -?Grid?HyperLinkField、WindowField??UrlEncode??,????URL??(???true)。 -?????????????,?????????????...LiveChat Starter Kit: LCSK v1.5.2: New features: Visitor location (City - Country) from geo-location Pass configuration via javascript for the chat box New visitor identification (no more using the IP address as visitor identification) To update from 1.5.1 Run the /src/1.5.2-sql-updates.txt SQL script to update your database tables. If you have it installed via NuGet, simply update your package and the file will be included so you can run the update script. New installation The easiest way to add LCSK to your app is by...New ProjectsAdvanceWars: Advance Wars For NetARCBots API Program: This is a simple API program designed for quick use for the ARCBots API.AutoUpdaterdotNET: AutoUpdater.NET is a class library that allows .net developers to easily add auto update functionality to their project.C++ AMP Conformance Test Suite: C++ AMP Conformance Test Suite contains a set of tests to aid in verifying compiler, library, and runtime behaviors as specified in the C++ AMP open specification. DynamicObjectProxy: DOP (Dynamic Object Proxy) é uma biblioteca que permite que qualquer método de qualquer objeto possa ser interceptado através de um proxy dinâmico. Ao interceptar um método, pode-se decorar o objeto, alterando ou recuperando informações sobre o seu comportamento. Extremamente útil para logs, verificações de transações, etc. DOP (Dynamic Object Proxy) is a library that contains classes that makes it possible that any method of any object can be intercepted by a dynamic proxy. By interceptin...EAIP: ???????? Flatland: Artificial life, or A-Life, is a broad and ever emerging field that has found its applications in almost any field: economics, medicine, traffic planning, shopping habits, patterns in music. And it is evident that work with modelling logical life in artificial environments is a necessity for the future software developer. Abbots novella "Flatland: A Romance of Many Dimensions" describes the two dimensional world "Flatland", where life is geometrical shapes that have human-like emotions, but...GameAudioSystem: Simple Audio Game System written with OpenAL to be used with Ogre3D.HyperionSS2P - Simple scan to pdf solution: Simple scan to pdf solution.Issue Impala: Issue Impala is a powerful and elegant issue tracker.KoekyGL Wrapper: A .net wrapper for OpenGL aimed at making it easy to use OpenGL.Marik Sample Project: This is a sample by KitMongoDB Managment Client: Development MongoDB Web client. HTML 5 jQuery. One page web application. When Windows 8 metro is released then Metro style application To.MongoDB.Dynamic: MongoDB.Dynamic is a personal project that I’ve started when I was developing my first application targeting MongoDB as DBMS, using the “official driver” MongoDB.Driver, supported by 10gen. The objective is to provide a lightweight library with some interesting features that speed up development for desktop/web applications that accesses MongoDB databases. MongoDB.Dynamic is oriented to interfaces. You don’t need to create concrete classes of your entities, all you need to do is setup your...My Google Workspace: An easy way to create documents search at Google and read your emails and Much moreqzgfjava: git????,?android??“??”???SP Sticky Notes: SP Sticky Notes allows your users to add sticky notes to a page on your SharePoint site.Weather3: It's Metro Style AppXNA Scumm: This is a rewrite of the ScummVM engine using XNA. ScummVM is an engine that runs old school LucasArts graphical adventure games. It is written completely in C# and the first version will run on PC and Xbox 360. A Windows phone version will probably follow. Of course, you will need to own the original games in order to use it. I will start my work by The Secret of Monkey Island, more specifically the VGA CD version. Monkey Island 2: LeChuck's Revenge and Indiana Jones 4 and Fate of Atl...YoG Community Game: This project is a game, being developed by several members of the Yogscast Community Forums. It is a top-down shooter, based around the protagonist 'Joe', and his adventures through TV shows every day.

    Read the article

  • CodePlex Daily Summary for Tuesday, September 25, 2012

    CodePlex Daily Summary for Tuesday, September 25, 2012Popular ReleasesRawr: Rawr 5.0.0: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...Coevery - Free CRM: Coevery 1.0.0.26: The zh-CN issue has been solved. We also add a project management module.VidCoder: 1.4.1 Beta: Updated to HandBrake 4971. This should fix some issues with stuck PGS subtitles. Fixed build break which prevented pre-compiled XML serializers from showing up. Fixed problem where a preset would get errantly marked as modified when re-opening the encode settings window or importing a new preset.D3 Loot Tracker: 1.3: Added the ability to reload a previous session to be able to resume it. Removed goblin detection, let's keep this an item tracking utility only. Fixed a bug with crafting sound setting not working properly. Completely re-styled the UI.JSLint for Visual Studio 2010: 1.4.0: VS2012 support is alphaBlackJumboDog: Ver5.7.2: 2012.09.23 Ver5.7.2 (1)InetTest?? (2)HTTP?????????????????100???????????Player Framework by Microsoft: Player Framework for Windows 8 (Preview 6): IMPORTANT: List of breaking changes from preview 5 Added separate samples download with .vsix dependencies instead of source dependencies Support for FreeWheel SmartXML ad responses Support for Smooth Streaming SDK DownloaderPlugins Support for VMAP and TTML polling for live scenarios Support for custom smooth streaming byte stream and scheme handlers Support for new play time and position tracking plugin Added IsLiveChanged event Added AdaptivePlugin.MaxBitrate property Add...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.8: Version: 2.5.0.8 (Milestone 8): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete WAF: Mark the class DataModel as serializable. InfoMan: Minor improvements. InfoMan: Add unit tests for all modules. Othe...LogicCircuit: LogicCircuit 2.12.9.20: Logic Circuit - is educational software for designing and simulating logic circuits. Intuitive graphical user interface, allows you to create unrestricted circuit hierarchy with multi bit buses, debug circuits behavior with oscilloscope, and navigate running circuits hierarchy. Changes of this versionToolbars on text note dialog are more flexible now. You can select font face, size, color, and background of text you are typing. RAM now can be initialized to one of the following: random va...SiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor (1.1.2020.421): New features: Disable a specific part of SiteMap to keep the data without displaying them in the CRM application. It simply comments XML part of the sitemap (thanks to rboyers for this feature request) Right click an item and click on "Disable" to disable it Items disabled are greyed and a suffix "- disabled" is added Right click an item and click on "Enable" to enable it Refresh list of web resources in the web resources pickerHigLabo: HigLabo_20120919: Add XXXAsync method to all Client class for async await pattern. (HttpClient,BoxNetClient,DropboxClient,FacebookClient,FtpClient,RssClient,SugarSyncClient,TwitterClient,WindowsLiveClient) Add all api to HigLabo.Net.Ftp project. Add strong name to all assembly. Add HttpBodyMultipartFormData to provide upload multipart form data with http protocol. Add HttpBodyFormUrlEncodedData to provide form url encoded post data with http protocol. FacebookClient,RssClient,WindowsLiveClient,BoxNetClient cl...AJAX Control Toolkit: September 2012 Release: AJAX Control Toolkit Release Notes - September 2012 Release Version 60919September 2012 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4.5 – AJAX Control Toolkit for .NET 4.5 and sample site (Recommended). AJAX Control Toolkit .NET 4 – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - The current version of the AJAX Control Toolkit is not compatible with ...Sense/Net CMS - Enterprise Content Management: SenseNet 6.1.2 Community Edition: Sense/Net 6.1.2 Community EditionMain new featuresOur current release brings a lot of bugfixes, including the resolution of js/css editing cache issues, xlsx file handling from Office, expense claim demo workspace fixes and much more. Besides fixes 6.1.2 introduces workflow start options and other minor features like a reusable Reject client button for approval scenarios and resource editor enhancements. We have also fixed an issue with our install package to bring you a flawless installation...Solution Extender for Microsoft Dynamics CRM 2011: Solution Extender (2.0.0.6): Fix a problem when serializing entity records (this fix the problem when exporting queues)Visual C++ Directories Editor: VC++ Directories 2012 Editor v1.0 ML (x32-x64): version 1.0 ML for Visual C++ 2012WinRT XAML Toolkit: WinRT XAML Toolkit - 1.2.3: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features AsyncUI extensions Controls and control extensions Converters Debugging helpers Imaging IO helpers VisualTree helpers Samples Recent changes NOTE: Namespace changes DebugConsol...Python Tools for Visual Studio: 1.5 RC: PTVS 1.5RC Available! We’re pleased to announce the release of Python Tools for Visual Studio 1.5 RC. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, etc. support. The primary new feature for the 1.5 release is Django including Azure support! The http://www.djangoproject.com is a pop...Launchbar: Lanchbar 4.0.0: This application requires .NET 4.5 which you can find here: www.microsoft.com/visualstudio/downloadsAssaultCube Reloaded: 2.5.4 -: Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we try to package for those OSes. Try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compile your own for Linux (source included) Changelog: New logo Improved airstrike! Reset nukes...Extended WPF Toolkit: Extended WPF Toolkit - 1.7.0: Want an easier way to install the Extended WPF Toolkit?The Extended WPF Toolkit is available on Nuget. What's new in the 1.7.0 Release?New controls Zoombox Pie New features / bug fixes PropertyGrid.ShowTitle property added to allow showing/hiding the PropertyGrid title. Modifications to the PropertyGrid.EditorDefinitions collection will now automatically be applied to the PropertyGrid. Modifications to the PropertyGrid.PropertyDefinitions collection will now be reflected automaticaly...New ProjectsAffine transformations (Iterated function system): Small app for generating fractals using iterated function system.aspnet mvc store: Lite ASP.NET MVC CMSAugmented Reality: .Autocomplete: AutocompleteBCS to provide stock information in SharePoint 2013: This .Net assembly BCS external system provides live, read only data on Dow Jones 30 stocks details from MSN money webservices.Blood Alcohol Measurement Tool: Az alkalmazás kijelzi a felhasználó véralkoholszint változását az elfogyasztott alkoholos italok függvényében.Busqueda Incremental con un TEXTBOX: Hola, aqui estoy de nuevo con un aporte mas para la comunidad, en muchos foros he visto que estan buscando como hacer una busqueda incremental en un TEXTBOX.CRM 2011: Reassign or Transfer Personal Views: This Project allows CRM Administrator to quickly transfer (i.e. assign) advanced find views from one CRM user to another CRM user. ctripITSM doc: this is a documentation share for ctripITSM projectet Sprint 3: etsprint3Finance App for Windows 8: This is an WinJS Windows 8 application that computes various financial metrics.gadgets: Windows Sidebar Gargetsjprj: jprjKerosene ORM: Kerosene is a self-adaptive and configuration-less ORM library, with a SQL syntax based on C# dynamics, WCF, and Entity Framework capabilities for POCO objects.Lobster: ?? ?? ?????????.My Google Map: MyGoogleMap est un outils de génération de carte. Onestop.Contrib.CustomAdmin: Onestop.Contrib.CustomAdmin is a Theme for Orchard CMS providing for changing the admin dashboard elements such as Title and Logo.Onestop.Contrib.Disqus: Onestop.Contrib.Disqus is an advanced commenting module for Orchard CMS that uses Disqus.Onestop.Contrib.LayoutSelector: Onestop.Contrib.LayoutSelector is a simple part for switching to different versions of Layout.cshtml when editing Orchard content items.Onestop.Contrib.Navigation: Onestop.Contrib.Navigation is an advanced Menu Management system designed for Orchard CMS. Onestop.Contrib.Seo: Onestop.Contrib.Seo is an advanced Search Engine Optimization module for Orchard CMSOnestop.Contrib.SlideShow: Onestop.Contrib.SlideShow is an advanced module for managing slide animations on a page.pf2012: Simple HTML5 game as PF2012 electronic greeting.PHP-2012: this is for php for schoolPruebaProyecto: Carmen Asencio AmbrosioPulawJS: MVC Platform for JavaScript. Inspired by Zend FrameworkRevolution Emulator: Habbo Hotel flash emulator targeting the .NET 4.5 VM, written in C#.Ruby Rookie: This Project is for learning Ruby purposesSISLOG_Proy2: SISLOGSkyShellEx: SkyShellEx allows to sync any folder to SkyDrive via a simple ShellExtension. The sync option appears on the context menu of folders where applicable. sosoft: Sosoft Project.C# WinForm.Include Alarm Clock.sound9: sound9testddgit09242012: dTFS Agile Work Item Rollover: This is a command line utility used to rollover incomplete work from one sprint to the next. The tool has both interactive and silent modes, allowing you to seTFS Deployment Studio: Helps deploying applications built using TFS to the servers where they belong.TreeView In-place Editing in MVVM: This project demonstrates a clean way of doing the in-place editing in the WPF TreeView controlUniSoft: Teste source controlValidation Framework for .NET: Framework for validation of method paramters and return values.WarOfDev: war of developer, make your coding interesting . Waterhouse: A C# console application that takes various text inputs and converts it to Morse Code by blinking the numlock indicator.Web Package Pro: in dev

    Read the article

  • Highlighting rows and columns in an HTML table using JQuery

    - by nikolaosk
    A friend of mine was seeking some help regarding HTML tables and JQuery. I have decided to write a few posts demonstrating the various techniques I used with JQuery to achieve the desired functionality. ?here are other posts in my blog regarding JQuery.You can find them all here.I have received some comments from visitors of this blog that are "complaining" about the length of the blog posts. I will not write lengthy posts anymore...I mean I will try not to do so..We will demonstrate this with a step by step example. I will use Visual Studio 2012 Ultimate. You can also use Visual Studio 2012 Express Edition. You can also use VS 2010 editions. 1) Launch Visual Studio. Create an ASP.Net Empty Web application. Choose an appropriate name for your application.2) Add a web form, default.aspx page to the application.3) Add a table from the HTML controls tab control (from the Toolbox) on the default.aspx page4) Now we need to download the JQuery library. Please visit the http://jquery.com/ and download the minified version.5) We will add a stylesheet to the application (Style.css)5) Obviously at some point we need to reference the JQuery library and the external stylesheet. In the head section ? add the following lines.   <link href="Style.css" rel="stylesheet" type="text/css" />       <script src="jquery-1_8_2_min.js" type="text/javascript"></script> 6) Now we need to highlight the rows when the user hovers over them.7) First we need to type the HTML markup<body>    <form id="form1" runat="server">    <div>        <h1>Liverpool Legends</h1>        <table style="width: 50%;" border="1" cellpadding="10" cellspacing ="10">            <thead>                <tr><th>Defenders</th><th>MidFielders</th><th>Strikers</th></tr>            </thead>            <tbody>            <tr>                <td>Alan Hansen</td>                <td>Graeme Souness</td>                <td>Ian Rush</td>            </tr>            <tr>                <td>Alan Kennedy</td>                <td>Steven Gerrard</td>                <td>Michael Owen</td>            </tr>            <tr>                <td>Jamie Garragher</td>                <td>Kenny Dalglish</td>                <td>Robbie Fowler</td>            </tr>            <tr>                <td>Rob Jones</td>                <td>Xabi Alonso</td>                <td>Dirk Kuyt</td>            </tr>                </tbody>        </table>            </div>    </form></body>8) Now we need to write the simple rules in the style.css file.body{background-color:#eaeaea;}.hover { background-color:#42709b; color:#ff6a00;} 8) Inside the head section we also write the simple JQuery code.  <script type="text/javascript"> $(document).ready(function() { $('tr').hover( function() { $(this).find('td').addClass('hover'); }, function() { $(this).find('td').removeClass('hover'); } ); }); </script>9) Run your application and see the row changing background color and text color every time the user hovers over it. Let me explain how this functionality is achieved.We have the .hover style rule in the style.css file that contains some properties that define the background color value and the color value when the mouse will be hovered on the row.In the JQuery code we do attach the hover() event to the tr elements.The function that is called when the hovering takes place, we search for the td element and through the addClass function we apply the styles defined in the .hover class rule in the style.css file.I remove the .hover rule styles with the removeClass function. Now let's say that we want to highlight only alternate rows of the table.We need to add another rule in the style.css.alternate { background-color:#42709b; color:#ff6a00;} The JQuery code (comment out the previous JQuery code) follows  <script type="text/javascript">        $(document).ready(function() {                     $('table tr:odd').addClass('alternate');        });    </script>  When I run my application through VS I see the following result You can do that with columns as well. You can highlight alternate columns as well.The JQuery code (comment out the previous JQuery code) follows  <script type="text/javascript">        $(document).ready(function() {                      $('td:nth-child(odd)').addClass('alternate');        });    </script>  In this script I use the nth-child() method in the JQuery code.This method retrieves all the elements that are nth children of their parent.Have a look at the picture below to see the resultsYou can also change color to each individual cell when hovered on.The JQuery code (comment out the previous JQuery code) follows    <script type="text/javascript">        $(document).ready(function() {          $('td').hover(                  function() {                 $(this).addClass('hover');               },                function() {                    $(this).removeClass('hover');                }                );        });    </script> Have a look at the picture below to see the results. Hope it helps!!!

    Read the article

  • Pain Comes Instantly

    - by user701213
    When I look back at recent blog entries – many of which are not all that current (more on where my available writing time is going later) – I am struck by how many of them focus on public policy or legislative issues instead of, say, the latest nefarious cyberattack or exploit (or everyone’s favorite new pastime: coining terms for the Coming Cyberpocalypse: “digital Pearl Harbor” is so 1941). Speaking of which, I personally hope evil hackers from Malefactoria will someday hack into my bathroom scale – which in a future time will be connected to the Internet because, gosh, wouldn’t it be great to have absolutely everything in your life Internet-enabled? – and recalibrate it so I’m 10 pounds thinner. The horror. In part, my focus on public policy is due to an admitted limitation of my skill set. I enjoy reading technical articles about exploits and cybersecurity trends, but writing a blog entry on those topics would take more research than I have time for and, quite honestly, doesn’t play to my strengths. The first rule of writing is “write what you know.” The bigger contributing factor to my recent paucity of blog entries is that more and more of my waking hours are spent engaging in “thrust and parry” activity involving emerging regulations of some sort or other. I’ve opined in earlier blogs about what constitutes good and reasonable public policy so nobody can accuse me of being reflexively anti-regulation. That said, you have so many cycles in the day, and most of us would rather spend it slaying actual dragons than participating in focus groups on whether dragons are really a problem, whether lassoing them (with organic, sustainable and recyclable lassos) is preferable to slaying them – after all, dragons are people, too - and whether we need lasso compliance auditors to make sure lassos are being used correctly and humanely. (A point that seems to evade many rule makers: slaying dragons actually accomplishes something, whereas talking about “approved dragon slaying procedures and requirements” wastes the time of those who are competent to dispatch actual dragons and who were doing so very well without the input of “dragon-slaying theorists.”) Unfortunately for so many of us who would just get on with doing our day jobs, cybersecurity is rapidly devolving into the “focus groups on dragon dispatching” realm, which actual dragons slayers have little choice but to participate in. The general trend in cybersecurity is that powers-that-be – which encompasses groups other than just legislators – are often increasingly concerned and therefore feel they need to Do Something About Cybersecurity. Many seem to believe that if only we had the right amount of regulation and oversight, there would be no data breaches: a breach simply must mean Someone Is At Fault and Needs Supervision. (Leaving aside the fact that we have lots of home invasions despite a) guard dogs b) liberal carry permits c) alarm systems d) etc.) Also note that many well-managed and security-aware organizations, like the US Department of Defense, still get hacked. More specifically, many powers-that-be feel they must direct industry in a multiplicity of ways, up to and including how we actually build and deploy information technology systems. The more prescriptive the requirement, the more regulators or overseers a) can be seen to be doing something b) feel as if they are doing something regardless of whether they are actually doing something useful or cost effective. Note: an unfortunate concomitant of Doing Something is that often the cure is worse than the ailment. That is, doing what overseers want creates unfortunate byproducts that they either didn’t foresee or worse, don’t care about. After all, the logic goes, we Did Something. Prescriptive practice in the IT industry is problematic for a number of reasons. For a start, prescriptive guidance is really only appropriate if: • It is cost effective• It is “current” (meaning, the guidance doesn’t require the use of the technical equivalent of buggy whips long after horse-drawn transportation has become passé)*• It is practical (that is, pragmatic, proven and effective in the real world, not theoretical and unproven)• It solves the right problem With the above in mind, heading up the list of “you must be joking” regulations are recent disturbing developments in the Payment Card Industry (PCI) world. I’d like to give PCI kahunas the benefit of the doubt about their intentions, except that efforts by Oracle among others to make them aware of “unfortunate side effects of your requirements” – which is as tactful I can be for reasons that I believe will become obvious below - have gone, to-date, unanswered and more importantly, unchanged. A little background on PCI before I get too wound up. In 2008, the Payment Card Industry (PCI) Security Standards Council (SSC) introduced the Payment Application Data Security Standard (PA-DSS). That standard requires vendors of payment applications to ensure that their products implement specific requirements and undergo security assessment procedures. In order to have an application listed as a Validated Payment Application (VPA) and available for use by merchants, software vendors are required to execute the PCI Payment Application Vendor Release Agreement (VRA). (Are you still with me through all the acronyms?) Beginning in August 2010, the VRA imposed new obligations on vendors that are extraordinary and extraordinarily bad, short-sighted and unworkable. Specifically, PCI requires vendors to disclose (dare we say “tell all?”) to PCI any known security vulnerabilities and associated security breaches involving VPAs. ASAP. Think about the impact of that. PCI is asking a vendor to disclose to them: • Specific details of security vulnerabilities • Including exploit information or technical details of the vulnerability • Whether or not there is any mitigation available (as in a patch) PCI, in turn, has the right to blab about any and all of the above – specifically, to distribute all the gory details of what is disclosed - to the PCI SSC, qualified security assessors (QSAs), and any affiliate or agent or adviser of those entities, who are in turn permitted to share it with their respective affiliates, agents, employees, contractors, merchants, processors, service providers and other business partners. This assorted crew can’t be more than, oh, hundreds of thousands of entities. Does anybody believe that several hundred thousand people can keep a secret? Or that several hundred thousand people are all equally trustworthy? Or that not one of the people getting all that information would blab vulnerability details to a bad guy, even by accident? Or be a bad guy who uses the information to break into systems? (Wait, was that the Easter Bunny that just hopped by? Bringing world peace, no doubt.) Sarcasm aside, common sense tells us that telling lots of people a secret is guaranteed to “unsecret” the secret. Notably, being provided details of a vulnerability (without a patch) is of little or no use to companies running the affected application. Few users have the technological sophistication to create a workaround, and even if they do, most workarounds break some other functionality in the application or surrounding environment. Also, given the differences among corporate implementations of any application, it is highly unlikely that a single workaround is going to work for all corporate users. So until a patch is developed by the vendor, users remain at risk of exploit: even more so if the details of vulnerability have been widely shared. Sharing that information widely before a patch is available therefore does not help users, and instead helps only those wanting to exploit known security bugs. There’s a shocker for you. Furthermore, we already know that insider information about security vulnerabilities inevitably leaks, which is why most vendors closely hold such information and limit dissemination until a patch is available (and frequently limit dissemination of technical details even with the release of a patch). That’s the industry norm, not that PCI seems to realize or acknowledge that. Why would anybody release a bunch of highly technical exploit information to a cast of thousands, whose only “vetting” is that they are members of a PCI consortium? Oracle has had personal experience with this problem, which is one reason why information on security vulnerabilities at Oracle is “need to know” (we use our own row level access control to limit access to security bugs in our bug database, and thus less than 1% of development has access to this information), and we don’t provide some customers with more information than others or with vulnerability information and/or patches earlier than others. Failure to remember “insider information always leaks” creates problems in the general case, and has created problems for us specifically. A number of years ago, one of the UK intelligence agencies had information about a non-public security vulnerability in an Oracle product that they circulated among other UK and Commonwealth defense and intelligence entities. Nobody, it should be pointed out, bothered to report the problem to Oracle, even though only Oracle could produce a patch. The vulnerability was finally reported to Oracle by (drum roll) a US-based commercial company, to whom the information had leaked. (Note: every time I tell this story, the MI-whatever agency that created the problem gets a bit shirty with us. I know they meant well and have improved their vulnerability handling/sharing processes but, dudes, next time you find an Oracle vulnerability, try reporting it to us first before blabbing to lots of people who can’t actually fix the problem. Thank you!) Getting back to PCI: clearly, these new disclosure obligations increase the risk of exploitation of a vulnerability in a VPA and thus, of misappropriation of payment card data and customer information that a VPA processes, stores or transmits. It stands to reason that VRA’s current requirement for the widespread distribution of security vulnerability exploit details -- at any time, but particularly before a vendor can issue a patch or a workaround -- is very poor public policy. It effectively publicizes information of great value to potential attackers while not providing compensating benefits - actually, any benefits - to payment card merchants or consumers. In fact, it magnifies the risk to payment card merchants and consumers. The risk is most prominent in the time before a patch has been released, since customers often have little option but to continue using an application or system despite the risks. However, the risk is not limited to the time before a patch is issued: customers often need days, or weeks, to apply patches to systems, based upon the complexity of the issue and dependence on surrounding programs. Rather than decreasing the available window of exploit, this requirement increases the available window of exploit, both as to time available to exploit a vulnerability and the ease with which it can be exploited. Also, why would hackers focus on finding new vulnerabilities to exploit if they can get “EZHack” handed to them in such a manner: a) a vulnerability b) in a payment application c) with exploit code: the “Hacking Trifecta!“ It’s fair to say that this is probably the exact opposite of what PCI – or any of us – would want. Established industry practice concerning vulnerability handling avoids the risks created by the VRA’s vulnerability disclosure requirements. Specifically, the norm is not to release information about a security bug until the associated patch (or a pretty darn good workaround) has been issued. Once a patch is available, the notice to the user community is a high-level communication discussing the product at issue, the level of risk associated with the vulnerability, and how to apply the patch. The notices do not include either the specific customers affected by the vulnerability or forensic reports with maps of the exploit (both of which are required by the current VRA). In this way, customers have the tools they need to prioritize patching and to help prevent an attack, and the information released does not increase the risk of exploit. Furthermore, many vendors already use industry standards for vulnerability description: Common Vulnerability Enumeration (CVE) and Common Vulnerability Scoring System (CVSS). CVE helps ensure that customers know which particular issues a patch addresses and CVSS helps customers determine how severe a vulnerability is on a relative scale. Industry already provides the tools customers need to know what the patch contains and how bad the problem is that the patch remediates. So, what’s a poor vendor to do? Oracle is reaching out to other vendors subject to PCI and attempting to enlist then in a broad effort to engage PCI in rethinking (that is, eradicating) these requirements. I would therefore urge all who care about this issue, but especially those in the vendor community whose applications are subject to PCI and who may not have know they were being asked to tell-all to PCI and put their customers at risk, to do one of the following: • Contact PCI with your concerns• Contact Oracle (we are looking for vendors to sign our statement of concern)• And make sure you tell your customers that you have to rat them out to PCI if there is a breach involving the payment application I like to be charitable and say “PCI meant well” but in as important a public policy issue as what you disclose about vulnerabilities, to whom and when, meaning well isn’t enough. We need to do well. PCI, as regards this particular issue, has not done well, and has compounded the error by thus far being nonresponsive to those of us who have labored mightily to try to explain why they might want to rethink telling the entire planet about security problems with no solutions. By Way of Explanation… Non-related to PCI whatsoever, and the explanation for why I have not been blogging a lot recently, I have been working on Other Writing Venues with my sister Diane (who has also worked in the tech sector, inflicting upgrades on unsuspecting and largely ungrateful end users). I am pleased to note that we have recently (self-)published the first in the Miss Information Technology Murder Mystery series, Outsourcing Murder. The genre might best be described as “chick lit meets geek scene.” Our sisterly nom de plume is Maddi Davidson and (shameless plug follows): you can order the paper version of the book on Amazon, or the Kindle or Nook versions on www.amazon.com or www.bn.com, respectively. From our book jacket: Emma Jones, a 20-something IT consultant, is working on an outsourcing project at Tahiti Tacos, a restaurant chain offering Polynexican cuisine: refried poi, anyone? Emma despises her boss Padmanabh, a brilliant but arrogant partner in GD Consulting. When Emma discovers His-Royal-Padness’s body (verdict: death by cricket bat), she becomes a suspect.With her overprotective family and her best friend Stacey providing endless support and advice, Emma stumbles her way through an investigation of Padmanabh’s murder, bolstered by fusion food feeding frenzies, endless cups of frou-frou coffee and serious surfing sessions. While Stacey knows a PI who owes her a favor, landlady Magda urges Emma to tart up her underwear drawer before the next cute cop with a search warrant arrives. Emma’s mother offers to fix her up with a PhD student at Berkeley and showers her with self-defense gizmos while her old lover Keoni beckons from Hawai’i. And everyone, even Shaun the barista, knows a good lawyer. Book 2, Denial of Service, is coming out this summer. * Given the rate of change in technology, today’s “thou shalts” are easily next year’s “buggy whip guidance.”

    Read the article

  • ?Oracle Database 12c????Information Lifecycle Management ILM?Storage Enhancements

    - by Liu Maclean(???)
    Oracle Database 12c????Information Lifecycle Management ILM ?????????Storage Enhancements ???????? Lifecycle Management ILM ????????? Automatic Data Placement ??????, ??ADP? ?????? 12c???????Datafile??? Online Move Datafile, ????????????????datafile???????,??????????????? ????(12.1.0.1)Automatic Data Optimization?heat map????????: ????????? (CDB)?????Automatic Data Optimization?heat map Row-level policies for ADO are not supported for Temporal Validity. Partition-level ADO and compression are supported if partitioned on the end-time columns. Row-level policies for ADO are not supported for in-database archiving. Partition-level ADO and compression are supported if partitioned on the ORA_ARCHIVE_STATE column. Custom policies (user-defined functions) for ADO are not supported if the policies default at the tablespace level. ADO does not perform checks for storage space in a target tablespace when using storage tiering. ADO is not supported on tables with object types or materialized views. ADO concurrency (the number of simultaneous policy jobs for ADO) depends on the concurrency of the Oracle scheduler. If a policy job for ADO fails more than two times, then the job is marked disabled and the job must be manually enabled later. Policies for ADO are only run in the Oracle Scheduler maintenance windows. Outside of the maintenance windows all policies are stopped. The only exceptions are those jobs for rebuilding indexes in ADO offline mode. ADO has restrictions related to moving tables and table partitions. ??????row,segment???????????ADO??,?????create table?alter table?????? ????ADO??,??????????????,???????????????? storage tier , ?????????storage tier?????????, ??????????????ADO??????????? segment?row??group? ?CREATE TABLE?ALERT TABLE???ILM???,??????????????????ADO policy? ??ILM policy???????????????? ??????? ????ADO policy, ?????alter table  ???????,?????????????? CREATE TABLE sales_ado (PROD_ID NUMBER NOT NULL, CUST_ID NUMBER NOT NULL, TIME_ID DATE NOT NULL, CHANNEL_ID NUMBER NOT NULL, PROMO_ID NUMBER NOT NULL, QUANTITY_SOLD NUMBER(10,2) NOT NULL, AMOUNT_SOLD NUMBER(10,2) NOT NULL ) ILM ADD POLICY COMPRESS FOR ARCHIVE HIGH SEGMENT AFTER 6 MONTHS OF NO ACCESS; SQL> SELECT SUBSTR(policy_name,1,24) AS POLICY_NAME, policy_type, enabled 2 FROM USER_ILMPOLICIES; POLICY_NAME POLICY_TYPE ENABLED -------------------- -------------------------- -------------- P41 DATA MOVEMENT YES ALTER TABLE sales MODIFY PARTITION sales_1995 ILM ADD POLICY COMPRESS FOR ARCHIVE HIGH SEGMENT AFTER 6 MONTHS OF NO ACCESS; SELECT SUBSTR(policy_name,1,24) AS POLICY_NAME, policy_type, enabled FROM USER_ILMPOLICIES; POLICY_NAME POLICY_TYPE ENABLE ------------------------ ------------- ------ P1 DATA MOVEMENT YES P2 DATA MOVEMENT YES /* You can disable an ADO policy with the following */ ALTER TABLE sales_ado ILM DISABLE POLICY P1; /* You can delete an ADO policy with the following */ ALTER TABLE sales_ado ILM DELETE POLICY P1; /* You can disable all ADO policies with the following */ ALTER TABLE sales_ado ILM DISABLE_ALL; /* You can delete all ADO policies with the following */ ALTER TABLE sales_ado ILM DELETE_ALL; /* You can disable an ADO policy in a partition with the following */ ALTER TABLE sales MODIFY PARTITION sales_1995 ILM DISABLE POLICY P2; /* You can delete an ADO policy in a partition with the following */ ALTER TABLE sales MODIFY PARTITION sales_1995 ILM DELETE POLICY P2; ILM ???????: ?????ILM ADP????,???????: ?????? ???? activity tracking, ????2????????,???????????????????: SEGMENT-LEVEL???????????????????? ROW-LEVEL????????,??????? ????????: 1??????? SEGMENT-LEVEL activity tracking ALTER TABLE interval_sales ILM  ENABLE ACTIVITY TRACKING SEGMENT ACCESS ???????INTERVAL_SALES??segment level  activity tracking,?????????????????? 2? ??????????? ALTER TABLE emp ILM ENABLE ACTIVITY TRACKING (CREATE TIME , WRITE TIME); 3????????? ALTER TABLE emp ILM ENABLE ACTIVITY TRACKING  (READ TIME); ?12.1.0.1.0?????? ??HEAT_MAP??????????, ?????system??session?????heap_map????????????? ?????????HEAT MAP??,? ALTER SYSTEM SET HEAT_MAP = ON; ?HEAT MAP??????,??????????????????????????  ??SYSTEM?SYSAUX????????????? ???????HEAT MAP??: ALTER SYSTEM SET HEAT_MAP = OFF; ????? HEAT_MAP????, ?HEAT_MAP??? ?????????????????????? ?HEAT_MAP?????????Automatic Data Optimization (ADO)??? ??ADO??,Heat Map ?????????? ????V$HEAT_MAP_SEGMENT ??????? HEAT MAP?? SQL> select * from V$heat_map_segment; no rows selected SQL> alter session set heat_map=on; Session altered. SQL> select * from scott.emp; EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO ---------- ---------- --------- ---------- --------- ---------- ---------- ---------- 7369 SMITH CLERK 7902 17-DEC-80 800 20 7499 ALLEN SALESMAN 7698 20-FEB-81 1600 300 30 7521 WARD SALESMAN 7698 22-FEB-81 1250 500 30 7566 JONES MANAGER 7839 02-APR-81 2975 20 7654 MARTIN SALESMAN 7698 28-SEP-81 1250 1400 30 7698 BLAKE MANAGER 7839 01-MAY-81 2850 30 7782 CLARK MANAGER 7839 09-JUN-81 2450 10 7788 SCOTT ANALYST 7566 19-APR-87 3000 20 7839 KING PRESIDENT 17-NOV-81 5000 10 7844 TURNER SALESMAN 7698 08-SEP-81 1500 0 30 7876 ADAMS CLERK 7788 23-MAY-87 1100 20 7900 JAMES CLERK 7698 03-DEC-81 950 30 7902 FORD ANALYST 7566 03-DEC-81 3000 20 7934 MILLER CLERK 7782 23-JAN-82 1300 10 14 rows selected. SQL> select * from v$heat_map_segment; OBJECT_NAME SUBOBJECT_NAME OBJ# DATAOBJ# TRACK_TIM SEG SEG FUL LOO CON_ID -------------------- -------------------- ---------- ---------- --------- --- --- --- --- ---------- EMP 92997 92997 23-JUL-13 NO NO YES NO 0 ??v$heat_map_segment???,?v$heat_map_segment??????????????X$HEATMAPSEGMENT V$HEAT_MAP_SEGMENT displays real-time segment access information. Column Datatype Description OBJECT_NAME VARCHAR2(128) Name of the object SUBOBJECT_NAME VARCHAR2(128) Name of the subobject OBJ# NUMBER Object number DATAOBJ# NUMBER Data object number TRACK_TIME DATE Timestamp of current activity tracking SEGMENT_WRITE VARCHAR2(3) Indicates whether the segment has write access: (YES or NO) SEGMENT_READ VARCHAR2(3) Indicates whether the segment has read access: (YES or NO) FULL_SCAN VARCHAR2(3) Indicates whether the segment has full table scan: (YES or NO) LOOKUP_SCAN VARCHAR2(3) Indicates whether the segment has lookup scan: (YES or NO) CON_ID NUMBER The ID of the container to which the data pertains. Possible values include:   0: This value is used for rows containing data that pertain to the entire CDB. This value is also used for rows in non-CDBs. 1: This value is used for rows containing data that pertain to only the root n: Where n is the applicable container ID for the rows containing data The Heat Map feature is not supported in CDBs in Oracle Database 12c, so the value in this column can be ignored. ??HEAP MAP??????????????????,????DBA_HEAT_MAP_SEGMENT???????? ???????HEAT_MAP_STAT$?????? ??Automatic Data Optimization??????: ????1: SQL> alter system set heat_map=on; ?????? ????????????? scott?? http://www.askmaclean.com/archives/scott-schema-script.html SQL> grant all on dbms_lock to scott; ????? SQL> grant dba to scott; ????? @ilm_setup_basic C:\APP\XIANGBLI\ORADATA\MACLEAN\ilm.dbf @tktgilm_demo_env_setup SQL> connect scott/tiger ; ???? SQL> select count(*) from scott.employee; COUNT(*) ---------- 3072 ??? 1 ?? SQL> set serveroutput on SQL> exec print_compression_stats('SCOTT','EMPLOYEE'); Compression Stats ------------------ Uncmpressed : 3072 Adv/basic compressed : 0 Others : 0 PL/SQL ???????? ???????3072?????? ????????? ????policy ???????????? alter table employee ilm add policy row store compress advanced row after 3 days of no modification / SQL> set serveroutput on SQL> execute list_ilm_policies; -------------------------------------------------- Policies defined for SCOTT -------------------------------------------------- Object Name------ : EMPLOYEE Subobject Name--- : Object Type------ : TABLE Inherited from--- : POLICY NOT INHERITED Policy Name------ : P1 Action Type------ : COMPRESSION Scope------------ : ROW Compression level : ADVANCED Tier Tablespace-- : Condition type--- : LAST MODIFICATION TIME Condition days--- : 3 Enabled---------- : YES -------------------------------------------------- PL/SQL ???????? SQL> select sysdate from dual; SYSDATE -------------- 29-7? -13 SQL> execute set_back_chktime(get_policy_name('EMPLOYEE',null,'COMPRESSION','ROW','ADVANCED',3,null,null),'EMPLOYEE',null,6); Object check time reset ... -------------------------------------- Object Name : EMPLOYEE Object Number : 93123 D.Object Numbr : 93123 Policy Number : 1 Object chktime : 23-7? -13 08.13.42.000000 ?? Distnt chktime : 0 -------------------------------------- PL/SQL ???????? ?policy?chktime???6??, ????set_back_chktime???????????????“????”?,?????????,???????? ?????? alter system flush buffer_cache; alter system flush buffer_cache; alter system flush shared_pool; alter system flush shared_pool; SQL> execute set_window('MONDAY_WINDOW','OPEN'); Set Maint. Window OPEN ----------------------------- Window Name : MONDAY_WINDOW Enabled? : TRUE Active? : TRUE ----------------------------- PL/SQL ???????? SQL> exec dbms_lock.sleep(60) ; PL/SQL ???????? SQL> exec print_compression_stats('SCOTT', 'EMPLOYEE'); Compression Stats ------------------ Uncmpressed : 338 Adv/basic compressed : 2734 Others : 0 PL/SQL ???????? ??????????????? Adv/basic compressed : 2734 ??????? SQL> col object_name for a20 SQL> select object_id,object_name from dba_objects where object_name='EMPLOYEE'; OBJECT_ID OBJECT_NAME ---------- -------------------- 93123 EMPLOYEE SQL> execute list_ilm_policy_executions ; -------------------------------------------------- Policies execution details for SCOTT -------------------------------------------------- Policy Name------ : P22 Job Name--------- : ILMJOB48 Start time------- : 29-7? -13 08.37.45.061000 ?? End time--------- : 29-7? -13 08.37.48.629000 ?? ----------------- Object Name------ : EMPLOYEE Sub_obj Name----- : Obj Type--------- : TABLE ----------------- Exec-state------- : SELECTED FOR EXECUTION Job state-------- : COMPLETED SUCCESSFULLY Exec comments---- : Results comments- : --- -------------------------------------------------- PL/SQL ???????? ILMJOB48?????policy?JOB,?12.1.0.1??J00x???? ?MMON_SLAVE???M00x???15????????? select sample_time,program,module,action from v$active_session_history where action ='KDILM background EXEcution' order by sample_time; 29-7? -13 08.16.38.369000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.17.38.388000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.17.39.390000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.23.38.681000000 ?? ORACLE.EXE (M002) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.32.38.968000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.33.39.993000000 ?? ORACLE.EXE (M003) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.33.40.993000000 ?? ORACLE.EXE (M003) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.36.40.066000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.37.42.258000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.37.43.258000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.37.44.258000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.38.42.386000000 ?? ORACLE.EXE (M001) MMON_SLAVE KDILM background EXEcution select distinct action from v$active_session_history where action like 'KDILM%' KDILM background CLeaNup KDILM background EXEcution SQL> execute set_window('MONDAY_WINDOW','CLOSE'); Set Maint. Window CLOSE ----------------------------- Window Name : MONDAY_WINDOW Enabled? : TRUE Active? : FALSE ----------------------------- PL/SQL ???????? SQL> drop table employee purge ; ????? ???? ????? spool ilm_usecase_1_cleanup.lst @ilm_demo_cleanup ; spool off

    Read the article

  • Help with Design for Vacation Tracking System (C#/.NET/Access/WebServices/SOA/Excel) [closed]

    - by Aaronaught
    I have been tasked with developing a system for tracking our company's paid time-off (vacation, sick days, etc.) At the moment we are using an Excel spreadsheet on a shared network drive, and it works pretty well, but we are concerned that we won't be able to "trust" employees forever and sometimes we run into locking issues when two people try to open the spreadsheet at once. So we are trying to build something a little more robust. I would like some input on this design in terms of maintainability, scalability, extensibility, etc. It's a pretty simple workflow we need to represent right now: I started with a basic MS Access schema like this: Employees (EmpID int, EmpName varchar(50), AllowedDays int) Vacations (VacationID int, EmpID int, BeginDate datetime, EndDate datetime) But we don't want to spend a lot of time building a schema and database like this and have to change it later, so I think I am going to go with something that will be easier to expand through configuration. Right now the vacation table has this schema: Vacations (VacationID int, PropName varchar(50), PropValue varchar(50)) And the table will be populated with data like this: VacationID | PropName | PropValue -----------+--------------+------------------ 1 | EmpID | 4 1 | EmpName | James Jones 1 | Reason | Vacation 1 | BeginDate | 2/24/2010 1 | EndDate | 2/30/2010 1 | Destination | Spectate Swamp 2 | ... | ... I think this is a pretty good, extensible design, we can easily add new properties to the vacation like the destination or maybe approval status, etc. I wasn't too sure how to go about managing the database of valid properties, I thought of putting them in a separate PropNames table but it gets complicated to manage all the different data types and people say that you shouldn't put CLR type names into a SQL database, so I decided to use XML instead, here is the schema: <VacationProperties> <PropertyNames>EmpID,EmpName,Reason,BeginDate,EndDate,Destination</PropertyNames> <PropertyTypes>System.Int32,System.String,System.String,System.DateTime,System.DateTime,System.String</PropertyTypes> <PropertiesRequired>true,true,false,true,true,false</PropertiesRequired> </VacationProperties> I might need more fields than that, I'm not completely sure. I'm parsing the XML like this (would like some feedback on the parsing code): string xml = File.ReadAllText("properties.xml"); Match m = Regex.Match(xml, "<(PropertyNames)>(.*?)</PropertyNames>"; string[] pn = m.Value.Split(','); // do the same for PropertyTypes, PropertiesRequired Then I use the following code to persist configuration changes to the database: string sql = "DROP TABLE VacationProperties"; sql = sql + " CREATE TABLE VacationProperties "; sql = sql + "(PropertyName varchar(100), PropertyType varchar(100) "; sql = sql + "IsRequired varchar(100))"; for (int i = 0; i < pn.Length; i++) { sql = sql + " INSERT VacationProperties VALUES (" + pn[i] + "," + pt[i] + "," + pv[i] + ")"; } // GlobalConnection is a singleton new SqlCommand(sql, GlobalConnection.Instance).ExecuteReader(); So far so good, but after a few days of this I then realized that a lot of this was just a more specific kind of a generic workflow which could be further abstracted, and instead of writing all of this boilerplate plumbing code I could just come up with a workflow and plug it into a workflow engine like Windows Workflow Foundation and have the users configure it: In order to support routing these configurations throw the workflow system, it seemed natural to implement generic XML Web Services for this instead of just using an XML file as above. I've used this code to implement the Web Services: public class VacationConfigurationService : WebService { [WebMethod] public void UpdateConfiguration(string xml) { // Above code goes here } } Which was pretty easy, although I'm still working on a way to validate that XML against some kind of schema as there's no error-checking yet. I also created a few different services for other operations like VacationSubmissionService, VacationReportService, VacationDataService, VacationAuthenticationService, etc. The whole Service Oriented Architecture looks like this: And because the workflow itself might change, I have been working on a way to integrate the WF workflow system with MS Visio, which everybody at the office already knows how to use so they could make changes pretty easily. We have a diagram that looks like the following (it's kind of hard to read but the main items are Activities, Authenticators, Validators, Transformers, Processors, and Data Connections, they're all analogous to the services in the SOA diagram above). The requirements for this system are: (Note - I don't control these, they were given to me by management) Main workflow must interface with Excel spreadsheet, probably through VBA macros (to ease the transition to the new system) Alerts should integrate with MS Outlook, Lotus Notes, and SMS (text messages). We also want to interface it with the company Voice Mail system but that is not a "hard" requirement. Performance requirements: Must handle 250,000 Transactions Per Second Should be able to handle up to 20,000 employees (right now we have 3) 99.99% uptime ("four nines") expected Must be secure against outside hacking, but users cannot be required to enter a username/password. Platforms: Must support Windows XP/Vista/7, Linux, iPhone, Blackberry, DOS 2.0, VAX, IRIX, PDP-11, Apple IIc. Time to complete: 6 to 8 weeks. My questions are: Is this a good design for the system so far? Am I using all of the recommended best practices for these technologies? How do I integrate the Visio diagram above with the Windows Workflow Foundation to call the ConfigurationService and persist workflow changes? Am I missing any important components? Will this be extensible enough to support any scenario via end-user configuration? Will the system scale to the above performance requirements? Will we need any expensive hardware to run it? Are there any "gotchas" I should know about with respect to cross-platform compatibility? For example would it be difficult to convert this to an iPhone app? How long would you expect this to take? (We've dedicated 1 week for testing so I'm thinking maybe 5 weeks?) Many thanks for your advices, Aaron

    Read the article

  • Design for Vacation Tracking System

    - by Aaronaught
    I have been tasked with developing a system for tracking our company's paid time-off (vacation, sick days, etc.) At the moment we are using an Excel spreadsheet on a shared network drive, and it works pretty well, but we are concerned that we won't be able to "trust" employees forever and sometimes we run into locking issues when two people try to open the spreadsheet at once. So we are trying to build something a little more robust. I would like some input on this design in terms of maintainability, scalability, extensibility, etc. It's a pretty simple workflow we need to represent right now: I started with a basic MS Access schema like this: Employees (EmpID int, EmpName varchar(50), AllowedDays int) Vacations (VacationID int, EmpID int, BeginDate datetime, EndDate datetime) But we don't want to spend a lot of time building a schema and database like this and have to change it later, so I think I am going to go with something that will be easier to expand through configuration. Right now the vacation table has this schema: Vacations (VacationID int, PropName varchar(50), PropValue varchar(50)) And the table will be populated with data like this: VacationID | PropName | PropValue -----------+--------------+------------------ 1 | EmpID | 4 1 | EmpName | James Jones 1 | Reason | Vacation 1 | BeginDate | 2/24/2010 1 | EndDate | 2/30/2010 1 | Destination | Spectate Swamp 2 | ... | ... I think this is a pretty good, extensible design, we can easily add new properties to the vacation like the destination or maybe approval status, etc. I wasn't too sure how to go about managing the database of valid properties, I thought of putting them in a separate PropNames table but it gets complicated to manage all the different data types and people say that you shouldn't put CLR type names into a SQL database, so I decided to use XML instead, here is the schema: <VacationProperties> <PropertyNames>EmpID,EmpName,Reason,BeginDate,EndDate,Destination</PropertyNames> <PropertyTypes>System.Int32,System.String,System.String,System.DateTime,System.DateTime,System.String</PropertyTypes> <PropertiesRequired>true,true,false,true,true,false</PropertiesRequired> </VacationProperties> I might need more fields than that, I'm not completely sure. I'm parsing the XML like this (would like some feedback on the parsing code): string xml = File.ReadAllText("properties.xml"); Match m = Regex.Match(xml, "<(PropertyNames)>(.*?)</PropertyNames>"; string[] pn = m.Value.Split(','); // do the same for PropertyTypes, PropertiesRequired Then I use the following code to persist configuration changes to the database: string sql = "DROP TABLE VacationProperties"; sql = sql + " CREATE TABLE VacationProperties "; sql = sql + "(PropertyName varchar(100), PropertyType varchar(100) "; sql = sql + "IsRequired varchar(100))"; for (int i = 0; i < pn.Length; i++) { sql = sql + " INSERT VacationProperties VALUES (" + pn[i] + "," + pt[i] + "," + pv[i] + ")"; } // GlobalConnection is a singleton new SqlCommand(sql, GlobalConnection.Instance).ExecuteReader(); So far so good, but after a few days of this I then realized that a lot of this was just a more specific kind of a generic workflow which could be further abstracted, and instead of writing all of this boilerplate plumbing code I could just come up with a workflow and plug it into a workflow engine like Windows Workflow Foundation and have the users configure it: In order to support routing these configurations throw the workflow system, it seemed natural to implement generic XML Web Services for this instead of just using an XML file as above. I've used this code to implement the Web Services: public class VacationConfigurationService : WebService { [WebMethod] public void UpdateConfiguration(string xml) { // Above code goes here } } Which was pretty easy, although I'm still working on a way to validate that XML against some kind of schema as there's no error-checking yet. I also created a few different services for other operations like VacationSubmissionService, VacationReportService, VacationDataService, VacationAuthenticationService, etc. The whole Service Oriented Architecture looks like this: And because the workflow itself might change, I have been working on a way to integrate the WF workflow system with MS Visio, which everybody at the office already knows how to use so they could make changes pretty easily. We have a diagram that looks like the following (it's kind of hard to read but the main items are Activities, Authenticators, Validators, Transformers, Processors, and Data Connections, they're all analogous to the services in the SOA diagram above). The requirements for this system are: (Note - I don't control these, they were given to me by management) Main workflow must interface with Excel spreadsheet, probably through VBA macros (to ease the transition to the new system) Alerts should integrate with MS Outlook, Lotus Notes, and SMS (text messages). We also want to interface it with the company Voice Mail system but that is not a "hard" requirement. Performance requirements: Must handle 250,000 Transactions Per Second Should be able to handle up to 20,000 employees (right now we have 3) 99.99% uptime ("four nines") expected Must be secure against outside hacking, but users cannot be required to enter a username/password. Platforms: Must support Windows XP/Vista/7, Linux, iPhone, Blackberry, DOS 2.0, VAX, IRIX, PDP-11, Apple IIc. Time to complete: 6 to 8 weeks. My questions are: Is this a good design for the system so far? Am I using all of the recommended best practices for these technologies? How do I integrate the Visio diagram above with the Windows Workflow Foundation to call the ConfigurationService and persist workflow changes? Am I missing any important components? Will this be extensible enough to support any scenario via end-user configuration? Will the system scale to the above performance requirements? Will we need any expensive hardware to run it? Are there any "gotchas" I should know about with respect to cross-platform compatibility? For example would it be difficult to convert this to an iPhone app? How long would you expect this to take? (We've dedicated 1 week for testing so I'm thinking maybe 5 weeks?)

    Read the article

  • Jquery Live Function

    - by marharépa
    Hi! I want to make this script to work as LIVE() function. Please help me! $(".img img").each(function() { $(this).cjObjectScaler({ destElem: $(this).parent(), method: "fit" }); }); the cjObjectScaler script (called in the html header) is this: (thanks for Doug Jones) (function ($) { jQuery.fn.imagesLoaded = function (callback) { var elems = this.filter('img'), len = elems.length; elems.bind('load', function () { if (--len <= 0) { callback.call(elems, this); } }).each(function () { // cached images don't fire load sometimes, so we reset src. if (this.complete || this.complete === undefined) { var src = this.src; // webkit hack from http://groups.google.com/group/jquery-dev/browse_thread/thread/eee6ab7b2da50e1f this.src = '#'; this.src = src; } }); }; })(jQuery); /* CJ Object Scaler */ (function ($) { jQuery.fn.cjObjectScaler = function (options) { /* user variables (settings) ***************************************/ var settings = { // must be a jQuery object method: "fill", // the parent object to scale our object into destElem: null, // fit|fill fade: 0 // if positive value, do hide/fadeIn }; /* system variables ***************************************/ var sys = { // function parameters version: '2.1.1', elem: null }; /* scale the image ***************************************/ function scaleObj(obj) { // declare some local variables var destW = jQuery(settings.destElem).width(), destH = jQuery(settings.destElem).height(), ratioX, ratioY, scale, newWidth, newHeight, borderW = parseInt(jQuery(obj).css("borderLeftWidth"), 10) + parseInt(jQuery(obj).css("borderRightWidth"), 10), borderH = parseInt(jQuery(obj).css("borderTopWidth"), 10) + parseInt(jQuery(obj).css("borderBottomWidth"), 10), objW = jQuery(obj).width(), objH = jQuery(obj).height(); // check for valid border values. IE takes in account border size when calculating width/height so just set to 0 borderW = isNaN(borderW) ? 0 : borderW; borderH = isNaN(borderH) ? 0 : borderH; // calculate scale ratios ratioX = destW / jQuery(obj).width(); ratioY = destH / jQuery(obj).height(); // Determine which algorithm to use if (!jQuery(obj).hasClass("cf_image_scaler_fill") && (jQuery(obj).hasClass("cf_image_scaler_fit") || settings.method === "fit")) { scale = ratioX < ratioY ? ratioX : ratioY; } else if (!jQuery(obj).hasClass("cf_image_scaler_fit") && (jQuery(obj).hasClass("cf_image_scaler_fill") || settings.method === "fill")) { scale = ratioX < ratioY ? ratioX : ratioY; } // calculate our new image dimensions newWidth = parseInt(jQuery(obj).width() * scale, 10) - borderW; newHeight = parseInt(jQuery(obj).height() * scale, 10) - borderH; // Set new dimensions & offset jQuery(obj).css({ "width": newWidth + "px", "height": newHeight + "px"//, // "position": "absolute", // "top": (parseInt((destH - newHeight) / 2, 10) - parseInt(borderH / 2, 10)) + "px", // "left": (parseInt((destW - newWidth) / 2, 10) - parseInt(borderW / 2, 10)) + "px" }).attr({ "width": newWidth, "height": newHeight }); // do our fancy fade in, if user supplied a fade amount if (settings.fade > 0) { jQuery(obj).fadeIn(settings.fade); } } /* set up any user passed variables ***************************************/ if (options) { jQuery.extend(settings, options); } /* main ***************************************/ return this.each(function () { sys.elem = this; // if they don't provide a destObject, use parent if (settings.destElem === null) { settings.destElem = jQuery(sys.elem).parent(); } // need to make sure the user set the parent's position. Things go bonker's if not set. // valid values: absolute|relative|fixed if (jQuery(settings.destElem).css("position") === "static") { jQuery(settings.destElem).css({ "position": "relative" }); } // if our object to scale is an image, we need to make sure it's loaded before we continue. if (typeof sys.elem === "object" && typeof settings.destElem === "object" && typeof settings.method === "string") { // if the user supplied a fade amount, hide our image if (settings.fade > 0) { jQuery(sys.elem).hide(); } if (sys.elem.nodeName === "IMG") { // to fix the weird width/height caching issue we set the image dimensions to be auto; jQuery(sys.elem).width("auto"); jQuery(sys.elem).height("auto"); // wait until the image is loaded before scaling jQuery(sys.elem).imagesLoaded(function () { scaleObj(this); }); } else { scaleObj(jQuery(sys.elem)); } } else { console.debug("CJ Object Scaler could not initialize."); return; } }); }; })(jQuery);

    Read the article

  • Remove/squash entries in a vertical hash

    - by Forkrul Assail
    I have a grid that represents an X, Y matrix, stored as a hash here. Some points on the X Y matrix may have values (as type string), and some may not. A typical grid could look like this: {[9, 5]=>"Alaina", [10, 3]=>"Courtney", [11, 1]=>"Gladys", [8, 7]=>"Alford", [14, 11]=>"Lesley", [17, 2]=>"Lawson", [0, 5]=>"Katrine", [2, 1]=>"Tyra", [3, 3]=>"Fredy", [1, 7]=>"Magnus", [6, 9]=>"Nels", [7, 11]=>"Kylie", [11, 0]=>"Kellen", [10, 2]=>"Johan", [14, 10]=>"Justice", [0, 4]=>"Barton", [2, 0]=>"Charley", [3, 2]=>"Magnolia", [1, 6]=>"Maximo", [7, 10]=>"Olga", [19, 5]=>"Isadore", [16, 3]=>"Delfina", [17, 1]=>"Noe", [20, 11]=>"Francis", [10, 5]=>"Creola", [9, 3]=>"Bulah", [8, 1]=>"Lempi", [11, 7]=>"Raquel", [13, 11]=>"Jace", [1, 5]=>"Garth", [3, 1]=>"Ernest", [2, 3]=>"Malcolm", [0, 7]=>"Alejandrin", [7, 9]=>"Marina", [6, 11]=>"Otilia", [16, 2]=>"Hailey", [20, 10]=>"Brandt", [8, 0]=>"Madeline", [9, 2]=>"Leanne", [13, 10]=>"Jenifer", [1, 4]=>"Humberto", [3, 0]=>"Nicholaus", [2, 2]=>"Nadia", [0, 6]=>"Abigail", [6, 10]=>"Zola", [20, 5]=>"Clementina", [23, 3]=>"Alvah", [19, 11]=>"Wallace", [11, 5]=>"Tracey", [8, 3]=>"Hulda", [9, 1]=>"Jedidiah", [10, 7]=>"Annetta", [12, 11]=>"Nicole", [2, 5]=>"Alison", [0, 1]=>"Wilma", [1, 3]=>"Shana", [3, 7]=>"Judd", [4, 9]=>"Lucio", [5, 11]=>"Hardy", [19, 10]=>"Immanuel", [9, 0]=>"Uriel", [8, 2]=>"Milton", [12, 10]=>"Elody", [5, 10]=>"Alexanne", [1, 2]=>"Lauretta", [0, 0]=>"Louvenia", [2, 4]=>"Adelia", [21, 5]=>"Erling", [18, 11]=>"Corene", [22, 3]=>"Haskell", [11, 11]=>"Leta", [10, 9]=>"Terrence", [14, 1]=>"Giuseppe", [15, 3]=>"Silas", [12, 5]=>"Johnnie", [4, 11]=>"Aurelie", [5, 9]=>"Meggie", [2, 7]=>"Phoebe", [0, 3]=>"Sister", [1, 1]=>"Violet", [3, 5]=>"Lilian", [18, 10]=>"Eusebio", [11, 10]=>"Emma", [15, 2]=>"Theodore", [14, 0]=>"Cassidy", [4, 10]=>"Edmund", [2, 6]=>"Claire", [0, 2]=>"Madisen", [1, 0]=>"Kasey", [3, 4]=>"Elijah", [17, 11]=>"Susana", [20, 1]=>"Nicklaus", [21, 3]=>"Kelsie", [10, 11]=>"Garnett", [11, 9]=>"Emanuel", [15, 1]=>"Louvenia", [14, 3]=>"Otho", [13, 5]=>"Vincenza", [3, 11]=>"Tate", [2, 9]=>"Beau", [5, 7]=>"Jason", [6, 1]=>"Jayde", [7, 3]=>"Lamont", [4, 5]=>"Curt", [17, 10]=>"Mack", [21, 2]=>"Lilyan", [10, 10]=>"Ruthe", [14, 2]=>"Georgianna", [4, 4]=>"Nyasia", [6, 0]=>"Sadie", [16, 11]=>"Emil", [21, 1]=>"Melba", [20, 3]=>"Delia", [3, 10]=>"Rosalee", [2, 8]=>"Myrtle", [7, 2]=>"Rigoberto", [14, 5]=>"Jedidiah", [13, 3]=>"Flavie", [12, 1]=>"Evie", [8, 9]=>"Olaf", [9, 11]=>"Stan", [20, 2]=>"Judge", [5, 5]=>"Cassie", [7, 1]=>"Gracie", [6, 3]=>"Armando", [4, 7]=>"Delia", [3, 9]=>"Marley", [16, 10]=>"Robyn", [2, 11]=>"Richie", [12, 0]=>"Gilberto", [13, 2]=>"Dedrick", [9, 10]=>"Liam", [5, 4]=>"Jabari", [7, 0]=>"Enola", [6, 2]=>"Lela", [3, 8]=>"Jade", [2, 10]=>"Johnson", [15, 5]=>"Willow", [12, 3]=>"Fredrick", [13, 1]=>"Beau", [9, 9]=>"Carlie", [8, 11]=>"Daisha", [6, 5]=>"Declan", [4, 1]=>"Carolina", [5, 3]=>"Cruz", [7, 7]=>"Jaime", [0, 9]=>"Anthony", [1, 11]=>"Esta", [13, 0]=>"Shaina", [12, 2]=>"Alec", [8, 10]=>"Lora", [6, 4]=>"Emely", [4, 0]=>"Rodger", [5, 2]=>"Cedrick", [0, 8]=>"Collin", [1, 10]=>"Armani", [16, 5]=>"Brooks", [19, 3]=>"Eleanora", [18, 1]=>"Alva", [7, 5]=>"Melissa", [5, 1]=>"Tabitha", [4, 3]=>"Aniya", [6, 7]=>"Marc", [1, 9]=>"Marjorie", [0, 11]=>"Arvilla", [19, 2]=>"Adela", [7, 4]=>"Zakary", [5, 0]=>"Emely", [4, 2]=>"Alison", [1, 8]=>"Lorenz", [0, 10]=>"Lisandro", [17, 5]=>"Aylin", [18, 3]=>"Giles", [19, 1]=>"Kyleigh", [8, 5]=>"Mary", [11, 3]=>"Claire", [10, 1]=>"Avis", [9, 7]=>"Manuela", [15, 11]=>"Chesley", [18, 2]=>"Kristopher", [24, 3]=>"Zola", [8, 4]=>"Pietro", [10, 0]=>"Delores", [11, 2]=>"Timmy", [15, 10]=>"Khalil", [18, 5]=>"Trudie", [17, 3]=>"Rafael", [16, 1]=>"Anthony"} What I need to do though, is basically remove all the empty entries. Let's say [17,3] = Raphael does not have an element in front of if (let's say - no [16,3] exists) then [17,3] should become [16,3] etc. So basically all empty items will be popped off the vertical (row) structure of the hash. Are there functions I should have a look at or is there an easy squash-like method that would just remove blanks and adjust and move other items? Thanks in advance for your help.

    Read the article

  • Server compromised. Bounce message contains many email addresses message was not sent to

    - by Tim Duncklee
    This is not a dupe. Please read and understand the issue before marking this as a duplicate question that has been answered already. Several customers are reporting bounce messages like the one below. At first I thought their computers had a virus but then I received one that was server generated so the problem is with the server. I've inspected the logs and these email addresses do not appear in the logs. The only thing I see that I do not remember seeing in the past are entries like this: Apr 30 13:34:49 psa86 qmail-queue-handlers[20994]: hook_dir = '/var/qmail//handlers/before-queue' Apr 30 13:34:49 psa86 qmail-queue-handlers[20994]: recipient[3] = '[email protected]' Apr 30 13:34:49 psa86 qmail-queue-handlers[20994]: handlers dir = '/var/qmail//handlers/before-queue/recipient/[email protected]' I've searched here and the web and maybe I'm just not entering the right search terms but I find nothing on this issue. Does anyone know how a hacker would attach additional email addresses to a message at the server and have them not appear in the logs? CentOS release 5.4, Plesk 8.6, QMail 1.03 Hi. This is the qmail-send program at psa.aaaaaa.com. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. <[email protected]>: 82.201.133.227 does not like recipient. Remote host said: 550 #5.1.0 Address rejected. Giving up on 82.201.133.227. <[email protected]>: 64.18.7.10 does not like recipient. Remote host said: 550 No such user - psmtp Giving up on 64.18.7.10. <[email protected]>: 173.194.68.27 does not like recipient. Remote host said: 550-5.1.1 The email account that you tried to reach does not exist. Please try 550-5.1.1 double-checking the recipient's email address for typos or 550-5.1.1 unnecessary spaces. Learn more at 550 5.1.1 http://support.google.com/mail/bin/answer.py?answer=6596 w8si1903qag.18 - gsmtp Giving up on 173.194.68.27. <[email protected]>: 207.115.36.23 does not like recipient. Remote host said: 550 5.2.1 <[email protected]>... Addressee unknown, relay=[174.142.62.210] Giving up on 207.115.36.23. <[email protected]>: 207.115.37.22 does not like recipient. Remote host said: 550 5.2.1 <[email protected]>... Addressee unknown, relay=[174.142.62.210] Giving up on 207.115.37.22. <[email protected]>: 207.115.37.20 does not like recipient. Remote host said: 550 5.2.1 <[email protected]>... Addressee unknown, relay=[174.142.62.210] Giving up on 207.115.37.20. <[email protected]>: 207.115.37.23 does not like recipient. Remote host said: 550 5.2.1 <[email protected]>... Addressee unknown, relay=[174.142.62.210] Giving up on 207.115.37.23. <[email protected]>: 207.115.36.22 does not like recipient. Remote host said: 550 5.2.1 <[email protected]>... Addressee unknown, relay=[174.142.62.210] Giving up on 207.115.36.22. <[email protected]>: 74.205.16.140 does not like recipient. Remote host said: 553 sorry, that domain isn't in my list of allowed rcpthosts; no valid cert for gatewaying (#5.7.1) Giving up on 74.205.16.140. <[email protected]>: 207.115.36.20 does not like recipient. Remote host said: 550 5.2.1 <[email protected]>... Addressee unknown, relay=[174.142.62.210] Giving up on 207.115.36.20. <[email protected]>: 207.115.37.21 does not like recipient. Remote host said: 550 5.2.1 <[email protected]>... Addressee unknown, relay=[174.142.62.210] Giving up on 207.115.37.21. <[email protected]>: 192.169.41.23 failed after I sent the message. Remote host said: 554 qq Sorry, no valid recipients (#5.1.3) --- Below this line is a copy of the message. Return-Path: <[email protected]> Received: (qmail 15962 invoked from network); 1 May 2013 06:49:34 -0400 Received: from exprod6mo107.postini.com (64.18.1.18) by psa.aaaaaa.com with (DHE-RSA-AES256-SHA encrypted) SMTP; 1 May 2013 06:49:34 -0400 Received: from aaaaaa.com (exprod6lut001.postini.com [64.18.1.199]) by exprod6mo107.postini.com (Postfix) with SMTP id 47F80B8CA4 for <[email protected]>; Wed, 1 May 2013 03:49:33 -0700 (PDT) From: "Support" <[email protected]> To: [email protected] Subject: Detected Potential Junk Mail Date: Wed, 1 May 2013 03:49:33 -0700 Dear [email protected], junk mail protection service has detected suspicious email message(s) since your last visit and directed them to your Message Center. You can inspect your suspicious email at: ... UPDATE: After not seeing this problem for a while, I personally sent a message and immediately got a bounce with several bad addresses that I know I did not send to. These are addresses that are not on my system or on the server. This problem happens with both Mac and Windows clients and with messages generated from Postini and sent to users on my system. This is NOT backscatter. If it was backscatter it would not have the contents of my message in it. UPDATE #2 Here is another bounce. This one was sent by me and the bounce came back immediately. Hi. This is the qmail-send program at psa.aaaaaa.com. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. <[email protected]>: 71.74.56.227 does not like recipient. Remote host said: 550 5.1.1 <[email protected]>... User unknown Giving up on 71.74.56.227. <[email protected]>: Connected to 208.34.236.3 but sender was rejected. Remote host said: 550 5.7.1 This system is configured to reject mail from 174.142.62.210 [174.142.62.210] (Host blacklisted - Found on Realtime Black List server 'bl.mailspike.net') <[email protected]>: 66.96.80.22 failed after I sent the message. Remote host said: 552 sorry, mailbox [email protected] is over quota temporarily (#5.1.1) <[email protected]>: 83.145.109.52 does not like recipient. Remote host said: 550 5.1.1 <[email protected]>: Recipient address rejected: User unknown in virtual mailbox table Giving up on 83.145.109.52. <[email protected]>: 69.49.101.234 does not like recipient. Remote host said: 550 5.7.1 <[email protected]>... H:M12 [174.142.62.210] Connection refused due to abuse. Please see http://mailspike.org/anubis/lookup.html or contact your E-mail provider. Giving up on 69.49.101.234. <[email protected]>: 212.55.154.36 does not like recipient. Remote host said: 550-The account has been suspended for inactivity 550 A conta do destinatario encontra-se suspensa por inactividade (#5.2.1) Giving up on 212.55.154.36. <[email protected]>: 199.168.90.102 failed after I sent the message. Remote host said: 552 Transaction [email protected] failed, remote said "550 No such user" (#5.1.1) <[email protected]>: 98.136.217.192 failed after I sent the message. Remote host said: 554 delivery error: dd Sorry your message to [email protected] cannot be delivered. This account has been disabled or discontinued [#102]. - mta1210.sbc.mail.gq1.yahoo.com --- Below this line is a copy of the message. Return-Path: <[email protected]> Received: (qmail 2618 invoked from network); 2 Jun 2013 22:32:51 -0400 Received: from 75-138-254-239.dhcp.jcsn.tn.charter.com (HELO ?192.168.0.66?) (75.138.254.239) by psa.aaaaaa.com with SMTP; 2 Jun 2013 22:32:48 -0400 User-Agent: Microsoft-Entourage/12.34.0.120813 Date: Sun, 02 Jun 2013 21:32:39 -0500 Subject: Refinance From: Tim Duncklee <[email protected]> To: Scott jones <[email protected]> Message-ID: <CDD16A79.67344%[email protected]> Thread-Topic: Reference Thread-Index: Ac5gAp2QmTs+LRv0SEOy7AJTX2DWzQ== Mime-version: 1.0 Content-type: multipart/mixed; boundary="B_3453053568_12034440" > This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. --B_3453053568_12034440 Content-type: multipart/related; boundary="B_3453053568_11982218" --B_3453053568_11982218 Content-type: multipart/alternative; boundary="B_3453053568_12000660" --B_3453053568_12000660 Content-type: text/plain; charset="ISO-8859-1" Content-transfer-encoding: quoted-printable Scott, ... email body here ... Here are the relevant log entries: Jun 2 22:32:50 psa qmail-queue[2616]: mail: all addreses are uncheckable - need to skip scanning (by deny mode) Jun 2 22:32:50 psa qmail-queue[2616]: scan: the message(drweb.tmp.i2SY0n) sent by [email protected] to [email protected] should be passed without checks, because contains uncheckable addresses Jun 2 22:32:50 psa qmail-queue-handlers[2617]: Handlers Filter before-queue for qmail started ... Jun 2 22:32:50 psa qmail-queue-handlers[2617]: [email protected] Jun 2 22:32:50 psa qmail-queue-handlers[2617]: [email protected] Jun 2 22:32:50 psa qmail-queue-handlers[2617]: hook_dir = '/var/qmail//handlers/before-queue' Jun 2 22:32:50 psa qmail-queue-handlers[2617]: recipient[3] = '[email protected]' Jun 2 22:32:50 psa qmail-queue-handlers[2617]: handlers dir = '/var/qmail//handlers/before-queue/recipient/[email protected]' Jun 2 22:32:51 psa qmail: 1370226771.060211 starting delivery 57: msg 1540285 to remote [email protected] Jun 2 22:32:51 psa qmail: 1370226771.060402 status: local 0/10 remote 1/20 Jun 2 22:32:51 psa qmail: 1370226771.060556 new msg 4915232 Jun 2 22:32:51 psa qmail: 1370226771.060671 info msg 4915232: bytes 687899 from <[email protected]> qp 2618 uid 2020 Jun 2 22:32:51 psa qmail-remote-handlers[2619]: Handlers Filter before-remote for qmail started ... Jun 2 22:32:51 psa qmail-queue-handlers[2617]: starter: submitter[2618] exited normally Jun 2 22:32:51 psa qmail-remote-handlers[2619]: from= Jun 2 22:32:51 psa qmail-remote-handlers[2619]: [email protected] Jun 2 22:32:51 psa qmail: 1370226771.078732 starting delivery 58: msg 4915232 to remote [email protected] Jun 2 22:32:51 psa qmail: 1370226771.078825 status: local 0/10 remote 2/20 Jun 2 22:32:51 psa qmail-remote-handlers[2621]: Handlers Filter before-remote for qmail started ... Jun 2 22:32:51 psa qmail-remote-handlers[2621]: [email protected] Jun 2 22:32:51 psa qmail-remote-handlers[2621]: [email protected]

    Read the article

  • In Flex, how to drag a component into a column of DataGrid (not the whole DataGrid)?

    - by Yousui
    Hi guys, I have a custom component: <?xml version="1.0" encoding="utf-8"?> <s:Group xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx="library://ns.adobe.com/flex/mx"> <fx:Declarations> </fx:Declarations> <fx:Script> <![CDATA[ [Bindable] public var label:String = "don't know"; [Bindable] public var imageName:String = "x.gif"; ]]> </fx:Script> <s:HGroup paddingLeft="8" paddingTop="8" paddingRight="8" paddingBottom="8"> <mx:Image id="img" source="assets/{imageName}" /> <s:Label text="{label}"/> </s:HGroup> </s:Group> and a custom render, which will be used in my DataGrid: <?xml version="1.0" encoding="utf-8"?> <s:MXDataGridItemRenderer xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx="library://ns.adobe.com/flex/mx" focusEnabled="true" xmlns:components="components.*"> <s:VGroup> <components:Person label="{dataGridListData.label}"> </components:Person> </s:VGroup> </s:MXDataGridItemRenderer> This is my application: <?xml version="1.0" encoding="utf-8"?> <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600" xmlns:services="services.*"> <s:layout> <s:VerticalLayout/> </s:layout> <fx:Script> <![CDATA[ import mx.collections.ArrayCollection; import mx.controls.Alert; import mx.controls.Image; import mx.rpc.events.ResultEvent; import mx.utils.ArrayUtil; ]]> </fx:Script> <fx:Declarations> <fx:XMLList id="employees"> <employee> <name>Christina Coenraets</name> <phone>555-219-2270</phone> <email>[email protected]</email> <active>true</active> <image>assets/001.png</image> </employee> <employee> <name>Joanne Wall</name> <phone>555-219-2012</phone> <email>[email protected]</email> <active>true</active> <image>assets/002.png</image> </employee> <employee> <name>Maurice Smith</name> <phone>555-219-2012</phone> <email>[email protected]</email> <active>false</active> <image>assets/003.png</image> </employee> <employee> <name>Mary Jones</name> <phone>555-219-2000</phone> <email>[email protected]</email> <active>true</active> <image>assets/004.png</image> </employee> </fx:XMLList> </fx:Declarations> <s:HGroup> <mx:DataGrid dataProvider="{employees}" width="100%" dropEnabled="true"> <mx:columns> <mx:DataGridColumn headerText="Employee Name" dataField="name"/> <mx:DataGridColumn headerText="Email" dataField="email"/> <mx:DataGridColumn headerText="Image" dataField="image" itemRenderer="renderers.render1"/> </mx:columns> </mx:DataGrid> <s:List dragEnabled="true" dragMoveEnabled="false"> <s:dataProvider> <s:ArrayCollection> <fx:String>aaa</fx:String> <fx:String>bbb</fx:String> <fx:String>ccc</fx:String> <fx:String>ddd</fx:String> </s:ArrayCollection> </s:dataProvider> </s:List> </s:HGroup> </s:Application> Now what I want to do is let the user drag an one or more item from the left List component and drop at the third column of the DataGrid, then using the dragged data to create another <components:Person /> object. So in the final result, maybe the first line contains just one <components:Person /> object at the third column, the second line contains two <components:Person /> object at the third column and so on. Can this be implemented in Flex? How? Great thanks.

    Read the article

< Previous Page | 19 20 21 22 23