Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 230/1359 | < Previous Page | 226 227 228 229 230 231 232 233 234 235 236 237  | Next Page >

• Cannot install ubuntu on Asus UX51VZ

  - by Andrey Frunt

  I removed Win8, changed partition table from GPT to MBR and installed Win7. The problem is that I don't see the grub after I installed ubuntu and only win7 boots. Any ideas? I tried to reinstall all of listed above about 5 times but with no success :( I tried both 13.04 and 13.10 UPD: I also tried Boot-Repair and it installed the grub2 for me but unfortunately only with options to run ubuntu, so I repaired bootrecord using windows tools to have an ability to run to windows. Anyway I still cannot configure the dual boot. Please help :)

  Read the article

• Can't reinstall VLC

  - by David matthews

  I use VLC a lot. And when 2.0 came out Ubuntu did not update to that version, the REPO had the older version even months later, So I added the daily repo: http://ppa.launchpad.net/videolan/stable-daily/ubuntu and that worked for a while, after a few months later I received a 'Distribution upgrade' and when I installed it, it removed VLC. when I tried to re-install it gave me a bunch of unmet dependency's, so I disabled the source, ran apt-get update, and tried to install the older VLC, that did not work either. I eventually found a web page, and it helped me get it working, and I was also able to get the 'Stable Daily' working too But last night, I got another 'distro upgrade' and it uninstalled VLC again. when I try to reinstall from daily I get: The following packages have unmet dependencies: vlc : Depends: fonts-freefont-ttf but it is not installable Depends: vlc-nox (= 2.0.3+git20121005+r392-0~r42~precise1) but it is not going to be installed Depends: libvlccore5 (>= 2.0.0) but it is not going to be installed Recommends: vlc-plugin-notify (= 2.0.3+git20121005+r392-0~r42~precise1) but it is not going to be installed Recommends: vlc-plugin-pulse (= 2.0.3+git20121005+r392-0~r42~precise1) but it is not going to be installed E: Unable to correct problems, you have held broken packages. and from the default source: vlc : Depends: vlc-nox (= 2.0.3-0ubuntu0.12.04.1) but it is not going to be installed Depends: libvlccore5 (>= 2.0.0) but it is not going to be installed Recommends: vlc-plugin-notify (= 2.0.3-0ubuntu0.12.04.1) but it is not going to be installed vlc-plugin-pulse : Depends: vlc-nox (= 2.0.3-0ubuntu0.12.04.1) but it is not going to be installed Depends: libvlccore5 (>= 2.0.0) but it is not going to be installed E: Unable to correct problems, you have held broken packages. Any ideas? I am using ubuntu 12.04 64bit.

  Read the article

• Wifi installation issues on Ubuntu 10.10

  - by SlyrNemesis

  Linux newbie here, anyway so here is the problem, I run Ubuntu 10.10 and I have a Sitecom 300N x2 Wireless Network dongle with chipset 8192SU, I used ndiswrapper to install my Windows Wireless driver because Sitecom doesn't have a linux driver, it says hardware present but it doesn't find any Wireless networks, nor does it connect to one. What can I do? The command "dmesg | grep ndis" gave this output in the terminal: [ 9.999954] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 11.111901] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisAllocateNetBufferAndNetBufferList' [ 11.111973] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMIndicateReceiveNetBufferLists' [ 11.112099] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMRegisterMiniportDriver' [ 11.112161] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisAllocateMdl' [ 11.112220] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMDeregisterMiniportDriver' [ 11.112280] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisFreeNetBufferListPool' [ 11.112339] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisAllocateNetBufferListPool' [ 11.112399] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisFreeMdl' [ 11.112457] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMAllocatePort' [ 11.112515] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMNetPnPEvent' [ 11.112573] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMFreePort' [ 11.112631] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMSendNetBufferListsComplete' [ 11.112780] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMSetMiniportAttributes' [ 11.112848] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisOpenConfigurationEx' [ 11.112946] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMIndicateStatusEx' [ 11.113017] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMOidRequestComplete' [ 11.113112] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisAllocateMemoryWithTagPriority' [ 11.113200] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisAllocateIoWorkItem' [ 11.113271] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisFreeIoWorkItem' [ 11.113342] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisQueueIoWorkItem' [ 11.113413] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisFreeNetBufferList' [ 11.113481] ndiswrapper (import:233): unknown symbol: WDFLDR.SYS:'WdfVersionBind' [ 11.113547] ndiswrapper (import:233): unknown symbol: WDFLDR.SYS:'WdfVersionBindClass' [ 11.113613] ndiswrapper (import:233): unknown symbol: WDFLDR.SYS:'WdfVersionUnbindClass' [ 11.113680] ndiswrapper (import:233): unknown symbol: WDFLDR.SYS:'WdfVersionUnbind' [ 11.113742] ndiswrapper (load_sys_files:206): couldn't prepare driver 'net8192su' [ 11.148888] ndiswrapper (load_wrap_driver:108): couldn't load driver net8192su; check system log for messages from 'loadndisdriver' [ 11.365200] usbcore: registered new interface driver ndiswrapper [ 12.818573] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.819183] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.819796] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.820505] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.821115] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.821726] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.822339] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.822948] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.823560] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.824204] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy

  Read the article

• How do I export banshee library settings to another machine?

  - by nityabaddha

  I am trying to downgrade my distro. The thing is, I have spent some few hours organising my music library and I do not want to lose my database. I have checked 'write meta data to files'. And so, my understanding is, that if I just import those same mp3s into a new library, those files will be arranged in the same order in the library. But this doesn't sound like a safe enough option. I'm moving from 11.10 to 10.04. Any help would be greatly appreciated. newbie

  Read the article

• Installation Problems & Antivirus

  - by Sagar Walvekar

  We have just migrated our systems from Windows to Ubuntu. We have more than 50 systems previously running Windows XP & Windows 7. After the release of 12.04 we decided to switch to Ubuntu. While we were installing Ubuntu 12.04 on Pentium 4 systems we have faced some issues. We tried it with a USB flash driver & CD. The typical configuration of the system is as follows: Pentium 4 with HT & 512 MB RAM, 40/80 GB IDE / SATA HDD. In windows there were several partitions and data on all the drives in all the systems. We have addressed this by taking backup of the C: drive on other drives & while installing Ubuntu we have just deleted & the C drive & recreated Linux partitions as follows - /root , /Boot, /Home & Swap.(in 10 GB) The problem is that the Linux gets installed without any error. However when I restart the system after the installation the system hangs in while detecting the HDD in BIOS and the system fails to start until I remove the HDD. When I installed the previous Ubuntu version it worked fine, without any hassle. Also if we install Ubuntu 12.04 on same HDD on any other higher capacity system & reconnected to old system it works fine. How can I fix this problem? Also, is there is any Antivirus which will give me real time protection on ubuntu 11 & higher versions with both 32 & 64 Bits?

  Read the article

• Why do we have non-free software in the official repositories?

  - by fluteflute

  The Ubuntu wiki describes the "sections" of the official Ubuntu repositories as follows: Main - Officially supported software. Restricted - Supported software that is not available under a completely free license. Universe - Community maintained software, i.e. not officially supported software. Multiverse - Software that is not free. I thought that software in the Ubuntu repositories had to be open source, however doesn't the description of the Multiverse directly contradicts this?

  Read the article

• How can I force X to start in a computer without a monitor?

  - by Javier Rivera

  I have I computer that have no monitor attached. When I boot it X fails to start because there is no monitor detected. If I boot it with a monitor attached and after X is started I remove the monitor everything works fine. Details and Background: This computer is a kind of hardware consolidation server. It's only purpose is to run two Virtual Box VM's that run Windows XP and some important but seldom used (once or twice a month) programs. For a couple of time it has been lying in a corner with an old monitor attached to it and working great. But space in the office was getting scarce and I moved the computer to the server room. There is no monitor attached to it there (no space), and sometimes the computer is rebooted. When it boots without monitor X is not started, the vms don't start and I get called to solve the problem.

  Read the article

• Does the hdd run more in ubuntu?

  - by starcorn

  Hello, This is something that's been bothering me, and I would like to know if it's an issue that's known. OK, I have monitored the hdd temperature, for a couple of days, when running in Ubuntu and Windows7. I have both OS installed on the same laptop, and I'm using Speedfan to monitor the hdd temp in Windows7, and hddtemp to monitor on Ubuntu. When running on windows7 the hdd usually stay around 37-39. This is on the load of when just web browsing, watch movies, and programming. And when I do the same thing on Ubuntu the hdd will go to 40-42. Most of the time however it stay 41-42 degree. Btw, even when just idling in Ubuntu the hdd will go over 40 degrees. This isn't a really big issue maybe since I read that hdd can handle temperature to at least 60 degree. However since the hdd is located just where I put my right palm, so it is quite disturbing at some times. Is this temperature the same for you guys which are running Ubuntu 10.10 on a laptop?

  Read the article

• Can't get bonding and bridging to work for KVM

  - by user9546

  Hi everyone. I can't for the life of me get bonding and bridging to work for the KVM setup I'm building. I'm using a fresh install (not an upgrade) of Ubuntu Server 10.10. I have 4 NICs on the same subnet (two intended for each of my two VMs). I'm trying to achieve the setup that Uthark describes here. But following his guidelines didn't work for me. My eth0 and eth1 did not come up, and "brctl show" showed that br0 didn't have any interfaces (the bond). I assumed it didn't work because he's using 10.4, and this article says there's a recent change in bonding: [I can't post more than one hyperlink per post because I'm a newbie.] I had to use this article to get my interfaces to work at all on the same subnet, which is why I have the post-up lines on some of my interfaces: [I can't post more than one hyperlink per post because I'm a newbie.] I installed ifenslave and ethtool. I also created /etc/modprobe.d/aliases.conf with the following content: alias bond0 bonding options bonding mode=6 miimon=100 downdelay=200 updelay=200 And I included "bonding" in /etc/modules So, after several approaches, here is my latest interfaces file: auto lo iface lo inet loopback auto eth5 iface eth5 inet manual auto br5 iface br5 inet static post-up /sbin/ip rule add from [network].79 lookup 10 post-up /sbin/ip route add table 10 default via [network].1 src [network].79 dev br5 address [network].79 netmask 255.255.255.0 network [network].0 broadcast [network].255 gateway [network].1 bridge_ports eth5 bridge_stp off bridge_fd 0 bridge_maxwait 0 auto eth2 iface eth2 inet manual auto br2 iface br2 inet static post-up /sbin/ip rule add from [network].78 lookup 11 post-up /sbin/ip route add table 11 default via [network].1 src [network].78 dev br2 address [network].78 netmask 255.255.255.0 network [network].0 broadcast [network].255 gateway [network].1 bridge_ports eth2 bridge_stp off bridge_fd 0 bridge_maxwait 0 iface eth0 inet manual iface eth1 inet manual auto bond0 iface bond0 inet static bond_miimon 100 bond_mode balance-alb up /sbin/ifenslave bond0 eth0 eth1 down /sbin/ifenslave -d bond0 eth0 eth1 auto br0 iface br0 inet static address [network].60 netmask 255.255.255.0 network [network].0 broadcast [network].255 gateway [network].1 bridge_ports bond0 eth2, eth5, br2, and br5 all seem to be working fine. The only other thing I could find that looked suspicious is an error regarding bonding in /var/log/messages: kernel: [ 3.828684] bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. even though there is a bond-miimon line in /etc/network/interfaces (if that's what they're talking about). Also, the bond seems to go in and out of promiscuous mode several times on boot: Jan 20 14:19:02 kvmhost kernel: [ 3.902378] device bond0 entered promiscuous mode Jan 20 14:19:02 kvmhost kernel: [ 3.902390] device bond0 left promiscuous mode Jan 20 14:19:02 kvmhost kernel: [ 3.902393] device bond0 entered promiscuous mode Jan 20 14:19:02 kvmhost kernel: [ 3.902397] device bond0 left promiscuous mode Jan 20 14:19:03 kvmhost kernel: [ 4.998990] device bond0 entered promiscuous mode Jan 20 14:19:03 kvmhost kernel: [ 4.999005] device bond0 left promiscuous mode Jan 20 14:19:03 kvmhost kernel: [ 4.999008] device bond0 entered promiscuous mode Jan 20 14:19:03 kvmhost kernel: [ 4.999012] device bond0 left promiscuous mode Any advice would be greatly appreciated. It seems that this must be possible, based on other posts, but I can't see what I'm doing wrong. Thanks.

  Read the article

• Network really slow with TL-WN951N wireless card

  - by Sam

  I literally just installed ubuntu and it seems to be working great except the network is deadly slow. I'm running a TL-WN951N wireless card which can download at about 600-700 KB/s in windows but in Ubuntu the max speed it seems to get is around 5KB/s. I guess I should note that my WAP is only wireless-G but like I said, I can get much better speeds in Windows. I'm testing the speeds by downloading files from here: http://mirror.internode.on.net/pub/test/ Anyone have any idea? I saw some people recommend downloading drivers and compiling them myself but I'm really really new to all of this so would appreciate someone babying me through it so I don't brick my computer! Here are the results of lspci -v: 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Flags: bus master, fast devsel, latency 0, IRQ 44 I/O ports at c000 [size=256] Memory at e9110000 (64-bit, prefetchable) [size=4K] Memory at e9100000 (64-bit, prefetchable) [size=64K] [virtual] Expansion ROM at e9120000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 05:02.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) Subsystem: Atheros Communications Inc. Device 3071 Flags: bus master, 66MHz, medium devsel, latency 168, IRQ 18 Memory at e9200000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k Kernel modules: ath9k

  Read the article

• Teamviewer in notification area only

  - by bisi

  Hello, I was wondering if there was a simple way to close Teamviewer to the notification area like I would close Skype? EDIT: Just to clarify my initial post, I want to enable Teamviewer in the notification area so that I can close it in my open programs bar (click on x), and it would still be running in the notification area (Skype does that, I can option Banshee and Rythmbox to do that, and Transmission does this too). AllTray puts it into the notification area, but the x still closes Teamviewer completely, and I have not found an optional setting in Teamviewer either. Thanks for the answer though Karni! ;) Thank you, bisi

  Read the article

• Live Mail folder and Thunderbird

  - by Umair Mustafa

  Me Friends Hello, Guys I'm facing a small issue and that is, I created a New account(MS live Email account) on Thunderbird and set the incoming protocol to IMAP and "pop3.live.com" Port No 995 , SSL to SSL/TLS and Outgoing protocol to SMTP and "smtp.live.com" Port No 25 , SSL to STARTTLS Now What I want is that there are sub folders in my Web based Live Email account which are not appearing when I create the account in Thunderbird. Please tell me how to get this thing done

  Read the article

• How to remove desktop environments?

  - by MyNameIs...

  I installed few environments that I wanted to try out on Ubuntu 12.04, but none of them worked at all. It could be that I installed them all at the same time, meaning the OS didn't get a chance to work everything out, but either way, they didn't work. I would now like to remove them. The one's that I installed are Fluxbox, OpenBox, XFCE, and MATE. I installed them through the help of this site. Everything seemed to have been working properly until I actually tried to use the shells and nothing loaded at all. Except for Fluxbox, I think that one worked. I want to know of any way to repair or perhaps just remove the packages entirely. I might have already removed them because I did the apt-get remove command on all of them, but they were still in the list on the login screen.

  Read the article

• How do I get brightness controls working properly on an Eee PC 1001P?

  - by Terry

  Is there a solution to the low screen brightness issue with the Eee PC 1001P and release 12.04? When I use the brightness control, the screen goes through three adjustment cycles of dark to semi bright, but never gets to bright. As you index the control up, brightness increases, then suddenly cuts back to dark. use the brightness button to further increase the brightness and the same cycle happens. As though there are three distinct brightness events, each one setting back to low level. Under no circumstances other than initial boot up can you get to a bright screen. I just finished installing 12.04 on two Acer (Gateway netbooks) with no brightness issue. Just on the Eee PC 1001P Eee PC model is 1001P

  Read the article

• Can't remove the libpcap0.8 package

  - by Yogesh

  I am getting error when running apt-get remove root@System:~/Downloads# sudo apt-get remove The following packages have unmet dependencies: libpcap0.8 : Breaks: libpcap0.8:i386 (!= 1.4.0-2) but 1.5.3-2 is installed libpcap0.8:i386 : Breaks: libpcap0.8 (!= 1.5.3-2) but 1.4.0-2 is installed libpcap0.8-dev : Depends: libpcap0.8 (= 1.5.3-2) but 1.4.0-2 is installed E: Unmet dependencies. Try using -f. and when I ran apt-get remove -f this is what happens: root@System:~/Downloads# sudo apt-get remove -f The following extra packages will be installed: libpcap0.8 The following packages will be upgraded: libpcap0.8 1 upgraded, 0 newly installed, 0 to remove and 365 not upgraded. 2 not fully installed or removed. Need to get 0 B/110 kB of archives. After this operation, 13.3 kB of additional disk space will be used. Do you want to continue? [Y/n] y (Reading database ... 163539 files and directories currently installed.) Preparing to unpack .../libpcap0.8_1.5.3-2_amd64.deb ... Unpacking libpcap0.8:amd64 (1.5.3-2) over (1.4.0-2) ... dpkg: error processing archive /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb (--unpack): trying to overwrite shared '/usr/share/man/man7/pcap-filter.7.gz', which is different from other instances of package libpcap0.8:amd64 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Processing triggers for man-db (2.6.7.1-1) ... Errors were encountered while processing: /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) root@System:~/Downloads# clear root@System:~/Downloads# sudo apt-get remove -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libpcap0.8 The following packages will be upgraded: libpcap0.8 1 upgraded, 0 newly installed, 0 to remove and 365 not upgraded. 2 not fully installed or removed. Need to get 0 B/110 kB of archives. After this operation, 13.3 kB of additional disk space will be used. Do you want to continue? [Y/n] y (Reading database ... 163539 files and directories currently installed.) Preparing to unpack .../libpcap0.8_1.5.3-2_amd64.deb ... Unpacking libpcap0.8:amd64 (1.5.3-2) over (1.4.0-2) ... dpkg: error processing archive /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb (--unpack): trying to overwrite shared '/usr/share/man/man7/pcap-filter.7.gz', which is different from other instances of package libpcap0.8:amd64 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Processing triggers for man-db (2.6.7.1-1) ... Errors were encountered while processing: /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) root@System:~/Downloads# root@System:~/Downloads# sudo apt-get check Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: libpcap0.8 : Breaks: libpcap0.8:i386 (!= 1.4.0-2) but 1.5.3-2 is installed libpcap0.8:i386 : Breaks: libpcap0.8 (!= 1.5.3-2) but 1.4.0-2 is installed libpcap0.8-dev : Depends: libpcap0.8 (= 1.5.3-2) but 1.4.0-2 is installed E: Unmet dependencies. Try using -f. root@System:~/Downloads# apt-cache policy libpcap0.8:amd64 libpcap0.8 libpcap0.8-dev libpcap0.8: Installed: 1.4.0-2 Candidate: 1.5.3-2 Version table: 1.5.3-2 0 500 http://in.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages *** 1.4.0-2 0 100 /var/lib/dpkg/status libpcap0.8: Installed: 1.4.0-2 Candidate: 1.5.3-2 Version table: 1.5.3-2 0 500 http://in.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages *** 1.4.0-2 0 100 /var/lib/dpkg/status libpcap0.8-dev: Installed: 1.5.3-2 Candidate: 1.5.3-2 Version table: *** 1.5.3-2 0 500 http://in.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages 100 /var/lib/dpkg/status root@System:~/Downloads# root@System:~/Downloads# sudo apt-get -f remove libpcap0.8 libpcap0.8-dev libpcap0.8-dev:i386 libpcap0.8:i386 Reading package lists... Done Building dependency tree Reading state information... Done Package 'libpcap0.8-dev:i386' is not installed, so not removed. Did you mean 'libpcap0.8-dev'? You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: libpcap-dev : Depends: libpcap0.8-dev but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). root@System:~/Downloads# sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libpcap0.8 The following packages will be upgraded: libpcap0.8 1 upgraded, 0 newly installed, 0 to remove and 365 not upgraded. 2 not fully installed or removed. Need to get 0 B/110 kB of archives. After this operation, 13.3 kB of additional disk space will be used. Do you want to continue? [Y/n] y (Reading database ... 163539 files and directories currently installed.) Preparing to unpack .../libpcap0.8_1.5.3-2_amd64.deb ... Unpacking libpcap0.8:amd64 (1.5.3-2) over (1.4.0-2) ... dpkg: error processing archive /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb (--unpack): trying to overwrite shared '/usr/share/man/man7/pcap-filter.7.gz', which is different from other instances of package libpcap0.8:amd64 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Processing triggers for man-db (2.6.7.1-1) ... Errors were encountered while processing: /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) root@System:~/Downloads#

  Read the article

• Intel graphics Ubuntu 12.04.3 LTS: does not detect second monitor

  - by user206551

  I have some problems to get the second monitor working on my Ubuntu 12.04.3 LTS. If I click on the detect button it does not work. Info about my system: $uname -a Linux LabTop2 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:22:28 UTC 2013 i686 i686 i386 GNU/Linux $cat /etc/*-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.3 LTS" NAME="Ubuntu" VERSION="12.04.3 LTS, Precise Pangolin" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu precise (12.04.3 LTS)" VERSION_ID="12.04" $lspci |grep VGA 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) $lsmod | grep video uvcvideo 72250 0 videobuf2_core 39385 1 uvcvideo videodev 96131 2 uvcvideo,videobuf2_core videobuf2_vmalloc 12920 1 uvcvideo videobuf2_memops 13042 1 videobuf2_vmalloc video 19116 1 i915 $xrandr -q xrandr: Failed to get size of gamma for output default Screen 0: minimum 1366 x 768, current 1368 x 768, maximum 1368 x 768 default connected 1368x768+0+0 0mm x 0mm 1366x768 0.0 1368x768 0.0* Before upgrading the system, xrand -q showed my much more resolution options and the other monitor. I have tried to install intel-linux-graphics-installer but this version of ubuntu is not supported Any help will be apreciated!!

  Read the article

• Retrieve a command from another, remote bash session

  - by Oli

  So I was on our laptop, SSH'd into my desktop, dropping some mad bashfu skill. There was one command I ran which was particularly skilful. I'm now about minute walk from the laptop and I really want that command here on my desktop, so that I can run it again. I realise I've already spent more time that it would have taken to rewrite it, but this has raised a common issue I have with bash history. I know I can force it to update each command, but I haven't... so: Is there any way to get a history from a different, live bash session?

  Read the article

• dependency problems now not able to install or remove any package

  - by Manish gour

  I was installing wvdial, now I do not need that, but because of that machine got problem with dependencies, and due to that I am unable to install any package, please help, Below is my stack trace: The following packages have unmet dependencies: libqt3-mt:i386: Depends: libjpeg62 but it is not installed libusb-dev: Depends: libusb-0.1-4 (= 2:0.1.12-14) but 2:0.1.12-20 is installed dependency problems:i386: Depends: libc6 (= 2.4) but 2.15-0ubuntu10.4 is installed Depends: libuniconf4.4 but it is not installed Depends: libwvstreams4.4-base but it is not installed Depends: libwvstreams4.4-extras but it is not installed Depends: libxplc0.3.13 but it is not installed Depends: ppp (= 2.3.0) but it is not installed

  Read the article

• Qualcomm Gobi WWAN modem no longer appears in Network Manager

  - by Andy E

  Not sure what happened here. I installed Cinnamon on my Ubuntu 12.10 environment yesterday, rebooted when finished and everything was working fine. I even used my WWAN modem after my fixed line broadband went down. However, after starting my machine this morning and seeing that my fixed line is still having problems (intermittently), I clicked the network applet and my WWAN device wasn't listed. It's not in the main network manager window either. It is still present on the system, however: $ lsusb Bus 001 Device 003: ID 05ca:18b0 Ricoh Co., Ltd Sony Vaio Integrated Webcam Bus 001 Device 004: ID 05c6:9221 Qualcomm, Inc. Gobi Wireless Modem (QDL mode) Bus 002 Device 005: ID 04e8:6865 Samsung Electronics Co., Ltd Bus 002 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub Bus 003 Device 002: ID 147e:1000 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor Bus 008 Device 002: ID 044e:3017 Alps Electric Co., Ltd BCM2046 Bluetooth Device Debug output from modem-manager, refers to a device that is blacklisted: modem-manager[10186]: [1355478137.024491] [mm-manager.c:866] device_added(): (tty/ttyUSB0): port's parent device is blacklisted modem-manager[10186]: [1355478137.024607] [mm-manager.c:875] device_added(): (tty/ttyS0): port's parent platform driver is not whitelisted modem-manager[10186]: [1355478137.024700] [mm-manager.c:875] device_added(): (tty/ttyS1): port's parent platform driver is not whitelisted ... I couldn't see anything relevant in the debug output for network-manager, but I've created a paste for it just in case. In /lib/udev/rules.d/77-mm-qdl-device-blacklist.rules, I found the following line that matches the device IDs from the lsusb output: # Generic Gobi QDL device ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9221", ENV{ID_MM_DEVICE_IGNORE}="1" I tried commenting out the second line and restarting network-manager/modem-manager but it didn't help. I've no idea where to go from here, does anyone else have any ideas?

  Read the article

• What are the common maintenance tasks on ubuntu?

  - by DaNieL

  When i was using windows, i used to run defrags, ccleaner and revouninstaller once a month to keep the system and the registry clean. I know ubuntu (and all linux distro) has a different system structure and doesnt need defrags, but i've heard there are some mainenance tasks that help to keep the system clean (for example, sudo apt-get clean or sudo apt-get autoremove) How many of those commands/software (and please explain what they do and if they can compromise the system stability) do you know and use regularly?

  Read the article

• Wireless hotkey not working on samsung rv 509

  - by Nirmik

  I have a Samsung NP-RV509-A0GIN laptop and LINUX UBUNTU 11.10 installed on it. all the Fn key combinations work except for the Fn+F9 i.e the wireless or the WLAN key. I am not able to switch off my wireless port as the key is not working. I can switch off the bluetooth from the bluetooth menu and disable wireless from the networking menu but this doesnt switch off the port.The indication light for wireless still keeps glowing. I tried many things but it is not working still. Can anyone please help me out with the Fn+F9(WLAN) hotkey problem?

  Read the article

• How to properly set up a network bridge using bridge-utils using wlan0 as the internet "source"?

  - by Miguel Azevedo

  Hey everyone this is my first post so go easy on me. I currently have a laptop with Ubuntu Studio 12.04 Beta 2 that is supplying a wireless internet connection to a windows 7 desktop computer that's connected directly to the laptop through Ethernet. I'm using the "shared to other computers" method in network manager but I believe it doesn't work with what I want to do. I would like to have the windows computer on the same subnet as every other computer in my house (192.168.1.x) so I can use LAN applications (MIDI over WiFi, Bonjour etc.) on the windows computer without having to run a massive cable to the router. I've been googling endlessly and tried multiple configurations in the /etc/network/interfaces file without success. All of them would report "cannot add wlan0 to bridge" Is there a specific way to make this work? What am I missing? Thank you

  Read the article

• Upgrading to Gnome 3.4 breaks Unity and gnome-shell

  - by mac

  I have upgraded my gnome shell to 3.4 in Ubuntu 11.10 through sudo add-apt-repository ppa:ricotz/testing sudo add-apt-repository ppa:gnome3-team/gnome3 sudo apt-get update && sudo apt-get dist-upgrade sudo apt-get install gnome-shell But it broke my system. Gnome shell is completely broken - When I login it just shows desktop wallpaper and nothing else. And importantly Unity is also broken. Attaching the screenshot Some main issues 1)Two menus are appearing now - Global menu as well as application menu 2)Icons on top-right panel are appearing weirdly 3)My Default Ambiance Theme also got screwed. Instead of black color menus, I am seeing white color menus. How do I fix them? Or Do I have an option to revert back to original settings or will reinstalling Unity/Gnome Shell helps ?

  Read the article

• How to configure apache / php / postfix website emails when using vhosts?

  - by Alistair Buxton

  I have a LAMP webserver configured to serve multiple websites. Each virtual host has various PHP applications, mainly Wordpress. When users sign up to the Wordpress sites, email is sent by PHP through to postfix, and then on to the receiver. The problem is that postfix is identifying itself to the remote server with the contents of /etc/hostname, which is not a fully qualified domain name. Some mail servers reject this and the mail bounces. Additionally, the return path is being set to one of the vitual host domains, seemingly at random. I could set /etc/hostname to one of the website domain names, but then the emails from the other websites would have a wrong server in the headers, and this would not fix the return-path issue. Possibly related, apache2 says "could not determine the server's fully qualified domain name" on startup. How do I fix this so that each website can send email without revealing the other websites hosted on the server?

  Read the article

• System starts without sound in Lubuntu

  - by cipricus

  When I log in the sound is muted. Why is that? This image is from the Xfce mixer, while the lxde volume does not show that the sound is off. So, I can see the sound muted only in Xfce Mixer. But I can also start the sound in another application, Pulse Audio Volume Control, if I change a setting in Output Devices from Analog Mono Output to LFE on Mono Separate Devices: The Analog Mono Output option here sets in fact the Xfce Mixer in the mute position from the first image. Could this be related to managing sessions (and therefore to these question)? This happens in LXDE session as well as in Lubuntu session. Starting sound and logging out and in between any of these two sessions would mute the volume as shown. Starting the volume in one of these and logging out and then logging in into the Gnome session, the sound would be off; but then, after starting sound, logging out of Gnome and then logging in into any session, the sound would not be muted. But after restart it would be so no matter the session.

  Read the article

< Previous Page | 226 227 228 229 230 231 232 233 234 235 236 237  | Next Page >