Search Results

Search found 12448 results on 498 pages for 'offline mode'.

Page 231/498 | < Previous Page | 227 228 229 230 231 232 233 234 235 236 237 238  | Next Page >

  • How do I configure wvdial to connect using a micromax 353g usb modem?

    - by user72209
    I have Micromax 353g usb modem . M using Ubuntu 11.04... I installed wvdail nd configured wvdial.conf as [Dialer Defaults] Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Init3 = ATS7=60 S30=0 S0=0 Init4 = AT+CGDCONT=1,"aircelgprs.pr" Password = Aircel Phone = *99***# Modem Type = USB Modem Stupid Mode = 1 Baud = 7200000 New PPD = yes Dial Attempts = 1 Modem = /dev/ttyUSB2 ISDN = 0 Username = aircel aftr commanding wvdial it says --> WvDial: Internet dialer version 1.61 --> Initializing modem. --> Sending: ATZ --> Sending: ATQ0 --> Re-Sending: ATZ --> Modem not responding. unable to connect plz help

    Read the article

  • How to give control over keyboard back to X server after Alt + SysRq + R trick

    - by Øystein Tråsdahl
    Situation: an application freezes the X server and no keyboard input works. So I use Alt+SysRq+R to take the keyboard out of raw mode (make the kernel take control of the keyboard away from the X server). I can then type Ctrl+Alt+F1, kill the bad processes, and everything works again. So far so good. But the keyboard is still in the hands of the kernel, making Alt+Left/Right shortcuts for Decr_Console/Incr_Console. This is annoying, and I want to give control over the keyboard back to the X server. I have tried typing Alt+SysRq+R again, this does not switch things back. I have also tried the command kbd_mode -u, but nothing changes. Any advice?

    Read the article

  • Change screen resolution from terminal

    - by Keith
    When I enabled my Nvidia graphics card, it changed the resolution of my screen to larger than my screen. As the result I cannot access any functions that were previously on the right side of my screen. How do I undo this? I originally had 8.04 and was able to change the resolution to whatever I wanted. I'm a new user and can copy and paste commands from a post to terminal mode but that's about it. I have no idea what they are or what they mean.

    Read the article

  • ANTLRWorks 2: Early Access Preview 10

    - by Geertjan
    I took a quick look at how the ANTLRWorks 2 project is getting on... and discovered that today, March 23, the new early access preview 10 has been released: http://www.antlr.org/wiki/display/ANTLR4/1.+Overview Downloaded it immediately and was impressed when browsing through the Java.g file that I also found on the Antlr site: (Click to enlarge the image above.) On the page above, the following enhancements are listed: Add tooltips for rule references Finally fixed the navigator update bug Major improvements to code completion Fix legacy mode Many performance and stability updates I've blogged before about how the developers on the above project consider their code completion to be "scary fast". Some discussions have taken place about how code developed by the ANTLRWorks team could be contributed to the NetBeans project, since NetBeans IDE and ANTLRWorks 2 are both based on the NetBeans Platform.

    Read the article

  • Real-Time Multi-User Gaming Platform

    - by Victor Engel
    I asked this question at Stack Overflow but was told it's more appropriate here, so I'm posting it again here. I'm considering developing a real-time multi-user game, and I want to gather some information about possibilities before I do some real development. I've thought about how best to ask the question, and for simplicity, the best way that occurred to me was to make an analogy to the field (or playground) game darebase. In the field game of darebase, there are two or more bases. To start, there is one team on each base. The game is a fancy game of tag. When two people meet out in the field, the person who left his base most recently timewise captures the other person. They then return to that person's base. Play continues until everyone is part of the same team. So, analogizing this to an online computer game, let's suppose there are an indefinite number of bases. When a person starts up the game, he has a team that is located at, for example, his current GPS coordinates. It could be a virtual world, but for sake of argument, let's suppose the virtual world corresponds to the player's actual GPS coordinates. The game software then consults the database to see where the closest other base is that is online, and the two teams play their game of virtual tag. Note that the user of the other base could have a different base than the one run by the current user as the closest base to him, in which case, he would be in two simultaneous battles, one with each base. When they go offline, the state of their players is saved on a server somewhere. Game logic calls for the players to have some automaton-logic of some sort, so they can fend for themselves in a limited way using basic rules, until their user goes online again. The user doesn't control the players' movements directly, but issues general directives that influence the players' movement logic. I think this analogy is good enough to frame my question. What sort of platforms are available to develop this sort of game? I've been looking at smartfoxserver, but I'm not convinced yet that it is the best option or even that it will work at all. One possibility, of course, would be to roll out my own web server, but I'd rather not do that if there is an existing service out there already that I could tap into. I will be developing for iOS devices at first. So any suggestions would be greatly appreciated. I think I need to establish the architecture first before proceeding with this project. Note that darbase is not the game I intend to implement, but, upon reflection, that might not be a bad idea either.

    Read the article

  • Google I/O 2012 - Advanced Design for Engineers

    Google I/O 2012 - Advanced Design for Engineers Alex Faaborg, Christian Robertson Design isn't black magic, it's a field that people can learn. In this talk two elite designers from Google will give you an advanced crash course in interactive and visual design. Topics will include mental models, natural mappings, metaphors, mode errors, visual hierarchies, typography and gestalt principles. Correctly applied this knowledge can drastically improve the quality of your work. For all I/O 2012 sessions, go to developers.google.com From: GoogleDevelopers Views: 158 9 ratings Time: 55:50 More in Science & Technology

    Read the article

  • how to launch grub menu for ubuntu guests in virtualbox?

    - by Ubuntuser
    I have ubuntu 12.04 alpha installed in virtualbox. When the virtual machine is started, it boots directly to the login screen without showing the grub menu. How can I get the grub menu to show up on start? Please note: the graphics is broken after recent updates, so i cannot login and make the changes. it is stuck at the screen "Ubuntu is running on low graphics mode" and the mouse and other keys do not work. [URL=http://img862.imageshack.us/i/screenshotat20120127171.png/][IMG]http://img862.imageshack.us/img862/9783/screenshotat20120127171.th.png[/IMG][/URL]

    Read the article

  • How to prevent WLAN connection from dropping permanently?

    - by Chris
    I have a desktop with a Fritz USB WLAN N stick and tried Ubuntu 12.04. Installation went fine and WLAN is working. However, connection drops permanent. Reconnecting manually fixes it but after a few minutes it drops again. It's connected to a Vodafone 802 box with WLAN N fix set. It seems that it works when I switch off N mode. But I need to test. Can someone confirm this issue or is there another solution? I have another machine with 12.04 (HP 625 laptop) running where connection is stable.

    Read the article

  • What is the best way to implement paginated text editing in Python?

    - by W.F
    I'm trying to build a formatted text editor in python. I need the editor to be paginated on edit mode. Same as in all popular word processors - when the user is editing the document what he/she sees is a representation of the actual, physical, page. I've tried looking into PySide but I can't find any ready solution to this, nor I can work out a way to do it myself. I am totally open to new technologies, so if you think Python is not the right choice here I would love to hear about new stuff (especially when I'm this new to UI coding). It only needs to be cross-platform and let me do rapid development (hence me looking for an out-of-the-box solution to this). Please suggest the best way to implement this. Please also note that I am looking for either a ready solution or an advice on how to tackle this. Thank you very much !

    Read the article

  • Color indication in Visual Studio 2012

    - by Jalpesh P. Vadgama
    This post will be a part of Visual Studio 2012 series. Before some days Microsoft has released the release candidate version of Visual Studio 2012. Today I got installed Visual Studio 2012 and once I loaded the visual studio 2012 first things I noticed that there is purple color blank strip is there at bottom. After doing some R and D on internet I have found that it is used for the different indication. The purple color indicates that there is no project loaded now. Once you open the project this line will be of blue color like below. Once you run and F5 and debug it, the color will change to orange like below . Isn’t that great? A simple color indicator for each mode in visual studio 2012. Stay tuned for the more. I am going to put some more post about Visual Studio 2012. Till then happy programing

    Read the article

  • How to make the emacs not to pop up a window when using tab-completion?

    - by Jinx
    When I use the emacs shell mode or in gdb, when I type double tab, the emacs pop up a new window which always cover an existed window. While in terminal, when I type double tab, to complete a directory, the terminal just print all the candidates in the same window. Can I make the emacs not to pop up a new window when I use this feature? edit this is I wanna do , but it's wrong, can somebody fix this? ;remove annoying poped-up windows (defun rm-popup-window () (other-window) (kill-this-buffer) (other-window) ) (global-set-key [C-'] 'rm-popup-window);

    Read the article

  • I upgraded my ubuntu server from 13.04 to 13.10 Bugs I faced

    - by kirankumar kotari
    On upgrade from 13.04 to 13.10 my system is hanged. So after waiting for 30 min. I tried to restart. Some file are corrupted. I inserted my 13.04 disk and started in rescue mode. Finally My system started Then, I upgraded some apps again. Now my system upgraded to 13.10. Finally Done. But, Now the bugs raised. On my start key I got only my online services. No other applications, recently used, music, video icons are not showing. I am facing huge problem. I am unable to see my application what i installed. I checked in unity tweak tool all are fine. So, I ask any one to solve this issue.

    Read the article

  • ssis 2012 timeouts

    - by Alex Bransky
    Originally posted on: http://geekswithblogs.net/influent1/archive/2014/05/30/156699.aspxI started getting timeouts from SSIS 2012 using the SSISDB and I couldn't make any sense of them, they seemed random.  When things were bad I couldn't even expand the Integration Services Catalogs node in SSMS.  Just by sheer luck I figured out the problem: too much data was being logged in SSISDB and the data file was up to 180 GB, with the log file at 500 GB.  I switched it to simple mode and shrank the log file, then changed the retention period to 90 days instead of 365.  Now I need to see what else I can do to keep it running smoothly...Note this:  http://www.ssistalk.com/2012/07/16/ssis-2012-beware-the-ssis-server-maintenance-job/

    Read the article

  • Why have mp3 files ripped with Lame always have 128 kbit/s irrespect of settings?

    - by Takkat
    Using Sound Juicer I am able to rip Cds very conveniently. I would like to rip them in about 256 kbit/s variable bitrate. To accomplish this I have defined the settings for mp3 in gnome-audio-profiles-properties as follows: audio/x-raw-int,rate=44100,channels=2 ! lame name=enc mode=0 vbr-quality=0 ! id3v2mux where vbr-quality=0 should give me a variable bitrate averaging 245 kbit/s. The resulting files however always say they are in 128 kbit/s. Is this only a tagging bug or is indeed the bitrate that low? How could I find out?

    Read the article

  • Solaris 11 JDK installation

    - by user20121221
    JAVA -JDK install on Solaris 11 pkg list -s jdk-7 pkg install jdk-7 ls /usr/jdk/instances jdk1.5.0 jdk1.6.0 mv jdk1.7.0_07 /usr/jdk/instances/jdk1.7.0 ls -l total 9 drwxr-xr-x 5 root bin 5 Sep 4 16:08 instances lrwxrwxrwx 1 root root 18 Jul 14 11:11 jdk1.6.0_26 -> instances/jdk1.6.0 lrwxrwxrwx 1 root root 8 Sep 4 16:09 latest -> jdk1.6.0 drwxr-xr-x 4 root bin 4 Jul 14 11:04 packages rm latest ln -s instances/jdk1.7.0 jdk1.7.0_07 ln -s jdk1.7.0_07 latest cd /usr/ ls -ld java lrwxrwxrwx 1 root root 12 Sep 4 16:12 java -> jdk/jdk1.6.0 rm java ln -s jdk/latest java java -version java version "1.7.0_07"Java(TM) SE Runtime Environment (build 1.7.0_07-b10)Java HotSpot(TM) Server VM (build 23.3-b01, mixed mode) stop firefox cd /usr/lib/firefox/plugins rm libnpjp2.so ln -s /usr/jdk/jdk1.7.0_07/jre/lib/i386/libnpjp2.so libnpjp2.so start firefox

    Read the article

  • What's Bringing SharePoint 2007 Server to a hault?

    - by juanlarios
    I've been having issues with my teste environment and I'm hoping someone has run into this problem and can point me in the right direction. I noticed: SharePoint Server Memory is through the roof at times and so is the CPU usage. Most of CPU usage is a sql proccess. Running out of disk space all the time. I looked in the Logs located in the 12 hive and sure enough I have 1G log files that are hard to open because of the size. The following are the 3 error messages that are flooding my SharePoint logs:   04/05/2010 16:02:36.99     OWSTIMER.EXE (0x0B94)                       0x0BA4    Windows SharePoint Services       Timer                             5uuf    Monitorable    The previous instance of the timer job 'Variations Propagate Page Job Definition', id '{F9A73EB4-90FE-4574-AD99-B4034056F915}' for service '{F89169F9-707B-4588-9ED0-E6D399FE5E3D}' is still running, so the current instance will be skipped.  Consider increasing the interval between jobs.    04/05/2010 15:59:51.51     OWSTIMER.EXE (0x0B94)                       0x0BA4    Windows SharePoint Services       Timer                             5uuf    Monitorable    The previous instance of the timer job 'Profile Synchronization', id '{A05E3439-8DCD-449A-9D9E-46D601CACAA2}' for service '{F89169F9-707B-4588-9ED0-E6D399FE5E3D}' is still running, so the current instance will be skipped.  Consider increasing the interval between jobs.     04/05/2010 15:56:25.53     OWSTIMER.EXE (0x0B94)                       0x0BA4    Windows SharePoint Services       Timer                             5uuf    Monitorable    The previous instance of the timer job 'Scheduled Unpublish', id '{6298F93F-388D-46B9-809E-CEDBB8659661}' for service '{F89169F9-707B-4588-9ED0-E6D399FE5E3D}' is still running, so the current instance will be skipped.  Consider increasing the interval between jobs.     04/05/2010 15:54:14.73     OWSTIMER.EXE (0x0B94)                       0x0BA4    Windows SharePoint Services       Timer                             5uuf    Monitorable    The previous instance of the timer job 'Config Refresh', id '{C42DA970-3DA3-4AA2-94E5-8499C5B80A3E}' for service '{7F6D2CBE-8071-4A30-B313-7C9989FC2D87}' is still running, so the current instance will be skipped.  Consider increasing the interval between jobs.       I'm googling around but haven't found much. I know one other person posted something about this back in 2008, but no answers were reached. I have already checked the databases to see if any of them have gone offline for whatever reason, but from SQL everything is fine. I recently re-created an SSP and deleted an old ssp. So I thought maybe that was causing it, and who knows? maybe that causes some of the problems or maybe all. I'm running configuration wizard and see if anything changes. Please if someone has had similar issues let me know.

    Read the article

  • Why do node packages put a comma on a newline?

    - by SomeKittens
    I'm learning node.js and am trying out Express. My first app had this code: var express = require('express') , routes = require('./routes') , user = require('./routes/user') , http = require('http') , path = require('path'); Reading through the mongoose tutorial gives me this: var mongoose = require('mongoose') , db = mongoose.createConnection('localhost', 'test'); On strict mode, JSHint gives me app.js: line 6, col 32, Bad line breaking before ','. Which shows that I'm not the only one out there who's bugged by this syntax. Is there any reason to declare vars this way instead of adding the comma at the end of the line?

    Read the article

  • udev rule gives wrong group ownership

    - by Tirithen
    I have added a udev rule for my Arduino, but the symlink gets the ownership "root root" instead of "root dialout". $ cat /etc/udev/rules.d/47-Arduino.rules SUBSYSTEM=="usb", ATTR{idVendor}=="2341", ATTR{idProduct}=="0001", MODE="0666", SYMLINK+="arduino", GROUP="dialout" $ ls -la /dev/ar* lrwxrwxrwx 1 root root 15 sep 8 11:02 /dev/arduino -> bus/usb/003/007 $ ls -la /dev/bus/usb/003/007 crw-rw-r-- 1 root dialout 189, 262 sep 8 11:12 /dev/bus/usb/003/007 My user is a member of the group "dialout" but I still get "Permission Denied" error when I'm trying to communicate with the device. There are also no problems when I'm using the "default" device "/etc/ttyACM3". $ ls -la /dev/ttyACM3 crw-rw---- 1 root dialout 166, 3 sep 8 11:12 /dev/ttyACM3 I have tried to restart both the udev service and reboot my computer. How can I fix this?

    Read the article

  • Ubuntu doesn't find hdds with higher clock rates

    - by user136243
    I dual boot windows 7 64-bit and ubuntu 13.10 64-bit on separate disks, and utilize some overclocking from the BIOS. Windows works fine, however ubuntu can't seem to find any hard drives, except for at stock cpu speeds. While attempting to boot it says Gave up waiting for root device... and ALERT! /dev/sdb7 does not exist. Dropping to shell! A bootable usb stick still works, but gparted doesn't detect any other drives. Have tried: Boot-repair Changing SATA mode in BIOS Newer kernels Older ubuntu versions Not sure it's relevant, but the motherboard is a Gigabyte GA-A75M-UD2H with the newest BIOS version, the CPU an AMD Llano. This is hardly a fatal error, but it's inconvenient to change BIOS settings whenever I want to switch OS, and furthermore I'm quite curious about why it won't work. I'd appreciate any insight into what the actual problem is. So how can I resolve this issue ?

    Read the article

  • Getting the Dell XPS 16 Synaptics touchpad to work after hibernation

    - by Aron Rotteveel
    I am currently experimenting with using Ubuntu as a my main OS instead of Windows 7. So far, pretty much everything is working fine, except for an issue that I am having with my touchpad. I have a Dell XPS 16 (1640) with a Synaptics touchpad. It works out of the box, but it seems that it stops working after returning from hibernation mode. This problem has also been addressed in an earlier bug, but judging from this bugreport, it should be fixed by now. I am running the 2.6.35-23-generic-pae kernel. Any ideas?

    Read the article

  • Problems installing 13.10 inside VMWare Player 4

    - by Thomas S.
    In the past I had no problems installing Ubuntu 12.04 inside VMWare Player 4.0.4 on my Windows 7 Pro machine. Now I installed Ubuntu 13.10 and have a couple of problems: the default screensize (even during the installation) is gigantic I've told Ubuntu to automatically login - after reboot the gigantic screen occurs without showing anything, without doing anything on mouse clicks, Ctrl+Alt+Backspace does not work switching to console using Ctrl+Alt+F1...F6 works, but is incredible slow invoking 'sudo reboot now' does not succeed, it prints Killing all remining processes... [fail] Restoring resolver state... [ OK ] Will now switch to single-user mode root@ubuntu1310:~# invoking now 'shutdown now' will soon show the same error. What I need to do to get Ubuntu 13.10 up and running in VMWare Player?

    Read the article

  • WIFI card intel r 2200 will not work

    - by Telemarkhero
    I have installed 12.04 on a Fujitsu Siemens Amilo Pro. Wifi card does not work. Have tried various threads but none have the same problem. Think I have the correct firmware but the following comes up: gill@ubuntu:~$ iwconfig lo no wireless extensions. eth1 IEEE 802.11bg ESSID:off/any Mode:Managed Channel:0 Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power=off Sensitivity=8/0 Retry limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. Also gill@ubuntu:~$ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes There is a power switch for wifi but it does not do anything in Ubuntu. Any pointers greatfully received.

    Read the article

  • Desktop dims when Thunderbird and Firefox are launched

    - by deshmukh
    I am running Ubuntu 12.04 (almost default install regularly updated) Unity interface on ASUS X53U (AMD Brazos Dual Core C60 with 2GB RAM). On launching Thunderbird and Firefox, the application dims and the cursor changes to wait mode. In case of Thunderbird, this is most pronounced with the wait time of up to a minute. Memory status checked with free indicates around 500MB of free memory on such occasions. The OS is stable and I can switch to a different work-space, etc. What could this be? Is this something normal?

    Read the article

  • The resulting .iso doesn't work - MultiCD

    - by Ravi
    Burning a separate CD for each distribution (Ubuntu, Kubuntu etc.) is cumbersome. I found MultiCD which promises me to have a single DVD which can hold several distributions. It is very great tool. Main Problem : The resulting .iso created from multicd doesn't work in a USB pen drive through I haven't tested it in a DVD. Running the .iso through pen drive (I mean booting from pen drive) doesn't work. I cannot even run it in live mode or can install it. Concern : I think if I burn the .iso to a DVD then might it will work. But considering it doesn't work in the pen drive, Will it work on the DVD? So how to fix it? If you know other method to make a multi CD/DVD then please tell me.

    Read the article

  • WINDOWS 7 DEAD BLUE SCREEN DOES NOT REBOOT OR INSTALL NEW WIN OS

    - by ADAM
    Windows died. So, I installed ubuntu, and have had difficulties downloading apps from the internet like skype or realplayer... etc. And It does not recognize my password. I needed to install drivers for my wireless from cd-rom. It does not show where to save new downloaded files and programs, and app and does not show how to install like windows does. So I would like to go back to windows. Window does not not start up anymore and I can not get safe mode with F8. It goes to black screen only and none of other parameters work when press f8! Any help is highly valued.

    Read the article

< Previous Page | 227 228 229 230 231 232 233 234 235 236 237 238  | Next Page >