Search Results

Search found 8037 results on 322 pages for 'hardware hacking'.

Page 232/322 | < Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >

• Synaptics error "no touchpad found" at startup on HP laptop

  - by Sandra

  I know there are a lot of topics on the synaptics touchpad not working, but I can't seem to find the answer to my problem anywhere. Please forgive me if I missed it. Here is what happened. After using the "ambient light" F11 key on my HP laptop (Compaq nc8430), the touchpad was disabled and I couldn't get it to work. Then I found this thread : "Synaptic touchpad on laptop not working". And Salem's answer totally solved my problem, both for the session fix and for the permanent fix. But since then, after each reboot I get the same error pop-up, with the following content: No touchpad found. No touchpad was found in this system. If the system has a touchpad, please make sure that the synaptics driver is properly installed and configured. If your touchpad is not found, though the driver is installed and configured correctly, please compile detailed information about your touchpad hardware and report this issue to the issue tracker. Needless to say, the driver is indeed installed, activated and configured (even though it's kind of useless now, since I guess the .conf file I created is doing all the work). I know it's a minor issue, because the touchpad does work properly, but it's getting really annoying... So, could anyone please help me fix this error pop-up problem ? Thank you !

  Read the article

• Ethernet card not detected on Ubuntu Server 12.04

  - by Dana

  My onboard ethernet isn't detected after a re-install of Server 12.04. For reasons I won't get into here, I had to put the server's drive into another machine to install Ubuntu, then swap back into the server. So the server starts up fine, except for the "Waiting for network configuration". I read in another article that Server, by default, doesn't handle new mac addresses for hardware changes dynamically, unlike Ubuntu Desktop, but a look at /etc/udev/rules.d/70-persistent-net.rules shows only one ethernet interface. Shouldn't it show both the old, and the new? lspci -vv shows an ethernet interface, so what the heck is going on? I should mention that the onboard LAN is enabled in the BIOS. And I know this isn't important, but all this started when I changed some network configuration settings in webmin before the re-install. It couldn't download any updates, so I tinkered a little. Broke, it, installed FreeNAS, which worked, but I didn't like it, then went back to Ubuntu Server, and now I'm in this pickle. Thanks for any advice!

  Read the article

• SQLAuthority News – Deployment guide for Microsoft SharePoint Foundation 2010

  - by pinaldave

  SharePoint and SQL Server both goes together – hands to hand. SharePoint installation is very interesting. At various organizations, the installation is very different and have various needs. SQL Server installation with SharePoint is equally important and I have often seen that it is being neglected. Microsoft has published the Deployment Guide for SharePoint Foundation. It talks about various database aspects as well. For optimal sharepoint installation the required version of SQL Server, including service packs and cumulative updates must be installed on the database server. The installation must include any additional features, such as SQL Analysis Services, and the appropriate SharePoint Foundation logins have to be added and configured. The database server must be hardened and, if it is required, databases must be created by the DBA. For more information, see: Hardware and software requirements (SharePoint Foundation 2010) Harden SQL Server for SharePoint environments (SharePoint Foundation 2010) Deploy by using DBA-created databases (SharePoint Foundation 2010) Deployment guide for Microsoft SharePoint Foundation 2010 Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: SharePoint

  Read the article

• Key announcements from Oracle Openworld - Video series

  - by Javier Puerta

  If you missed Oracle Openworld now you have the opportunity to watch a series of four 15-min webcasts with the key announcements, explained by EMEA key executives. Oracle OpenWorld I, OMN - Part 1 OPENWORLD I: Oracle's Cloud. interview with Alan HartwellGaye Hudson and Steve Walker, EMEA Corporate Communications take a look at Oracle's announcements leading up to Oracle Open World and talk to Alan Hartwell, VP Sales, Engineered Solutions, Exadata, Exalogic about Oracle's cloud offering. Oracle Open World II , OMN Part 2 OPENWORLD II: Engineered Systems with Alan HartwellGaye Hudson, VP Corporate Communications, EMEA talks to Alan Hartwell, VP Sales, Engineered Solutions, Exadata, Exalogic about Oracle's Engineered Systems, parallel hardware and software; Exalytics, Big Data Appliance & Enterprise Manager. Oracle OpenWorld III, OMN Part 3 OPENWORLD III: HW with John Abel, Storage with Luc Gheysens Gaye Hudson and Steve Walker talk to John Abel, Chief Technology Architect, Oracle Server and Storage, EMEA about SPARC SuperCluster and T4; and to Luc Gheysens, Senior Director, Storage Sales Specialist, EMEA about ZFS Storage and Pillar Axiom 600. Oracle OpenWorld IV, OMN Part 4 OPENWORLD IV: Oracle Fusion Applications with Noel ColoeGaye Hudson, VP Corporate Communications, EMEA talks to Noel Coloe, Head of Western Europe Applications Sales Development about Oracle Fusion Applications, a new paradigm in Enterprise applications.

  Read the article

• Items Affecting Performance of the MySQL Database

  - by Antoinette O'Sullivan

  To learn about the many factors that can affect the performance of the MySQL Database, take the MySQL Performance Tuning course. You will learn: How your hardware and operating system can affect performance How to set up and logging to improve performance Best practices for backup and recovery And much more You can take this 4-day instructor-led course through the following formats: Training-on-Demand: Start training within 24 hours of registering for training, following lectures at your own pace through streaming video and booking time on a lab environment to suit your schedule. Live-Virtual Event: Attend a live event from your own desk, no travel required. Choose from a selection of events on the schedule to suit different time-zones. In-Class Event: Travel to an education center to attend this course. Below is a selection of events already on the schedule.  Location  Date  Delivery Language  Brussels, Beligum  10 November 2014  English  Sao Paolo, Brazil  25 August 2014  Brazilian Portuguese  London, England  20 October 2014  English  Milan, Italy  20 October 2014  Italian  Rome, Italy  1 December 2014  Italian  Riga, Latvia  29 September 2014  Latvian  Petaling Jaya, Malaysia  22 September 2014  English  Utrecht, Netherlands  10 November 2014  English  Warsaw, Poland  1 September 2014  Polish  Barcelona, Spain  14 October 2014  Spanish To register for an event, request an additional event, or learn more about the authentic MySQL Curriculum, go to http://education.oracle.com/mysql.

  Read the article

• Firefox 4 crashing in VNC

  - by MacThePenguin

  On my desktop PC I've been using Kubuntu 10.04 for about a year. Recently I've updated Firefox to version 4 using aptitude and the mozilla-team/firefox-stable repository. Since then, I can't run it when I'm logged in through a VNC session. Firefox crashes immediately: when I try to run it from the console I get this error: ###!!! ABORT: X_ShmPutImage: BadShmSeg (invalid shared segment parameter); 3 requests ago: file /build/buildd/firefox-4.0.1+build1+nobinonly/build-tree/mozilla/toolkit/xre/nsX11ErrorHandler.cpp, line 203 ###!!! ABORT: X_ShmPutImage: BadShmSeg (invalid shared segment parameter); 3 requests ago: file /build/buildd/firefox-4.0.1+build1+nobinonly/build-tree/mozilla/toolkit/xre/nsX11ErrorHandler.cpp, line 203 Firefox works fine when I run it directly from the PC. Firefox 3.x worked fine also from a VNC session. I tried to turn off the hardware acceleration from the Firefox preferences, but that doesn't fix the problem. firefox --sync, firefox -safe-mode and firefox -ProfileManager also crash the same way. Any idea how to troubleshoot this? Thanks. Edit: additional info. I run vnc (RealVNC 4.1.1) from xinetd, this is the config I use: service Xvnc { type = UNLISTED disable = no socket_type = stream protocol = tcp wait = yes user = root server = /usr/bin/Xvnc4 server_args = -inetd :1 -desktop vnc5901 -query localhost -geometry 1160x675 -depth 16 -once -DisconnectClients=0 -NeverShared passwordFile=/path/to/vnc/password -render port = 5901 }

  Read the article

• Guest Blog: Secure your applications based on your business model, not your application architecture, by Yaldah Hakim

  - by Darin Pendergraft

  Today’s businesses are looking for new ways to engage their customers, embrace mobile applications, while staying in compliance, improving security and driving down costs.  For many, the solution to that problem is to host their applications with a Cloud Services provider, but concerns that a hosted application will be less secure continue to cause doubt. Oracle is recognized by Gartner as a leader in the User Provisioning and Identity and Access Governance magic quadrants, and has helped thousands of companies worldwide to secure their enterprise applications and identities.  Now those same world class IDM capabilities are available as a managed service, both for enterprise applications, as well has Oracle hosted applications. --- Listen to our IDM in the cloud podcast to hear Yvonne Wilson, Director of the IDM Practice in Cloud Service, explain how Oracle Managed Services provides IDM as a service ---Selecting OracleManaged Cloud Services to deploy and manage Oracle Identity Management Services is a smart business decision for a variety of reasons. Oracle hosted Identity Management infrastructure is deployed securely, resilient to failures, and supported by Oracle experts. In addition, Oracle  Managed Cloud Services monitors customer solutions from several perspectives to ensure they continue to work smoothly over time. Customers gain the benefit of Oracle Identity Management expertise to achieve predictable and effective results for their organization.Customers can select Oracle to host and manage any number of Oracle IDM products as a service as well as other Oracle’s security products, providing a flexible, cost effective alternative to onsite hardware and software costs.Security is a major concern for all organizations- making it increasingly important to partner with a company like Oracle to ensure consistency and a layered approach to security and compliance when selecting a cloud provider.  Oracle Cloud Service makes this possible for our customers by taking away the headache and complexity of managing Identity management infrastructure and other security solutions. For more information:http://www.oracle.com/us/solutions/cloud/managed-cloud-services/overview/index.htmlTwitter-https://twitter.com/OracleCloudZoneFacebook - http://www.facebook.com/OracleCloudComputing

  Read the article

• What are the packages/libraries I should install before compiling Python from source?

  - by Lennart Regebro

  Once in a while I need to install a new Ubuntu (I used it both for desktop and servers) and I always forget a couple of libraries I should have installed before compiling, meaning I have to recompile, and it's getting annoying. So now I want to make a complete list of all library packages to install before compiling Python (and preferably how optional they are). This is the list I compiled with below help and by digging in setup.py. It is complete for Ubuntu 10.04 and 11.04 at least: build-essential (obviously) libz-dev (also pretty common and essential) libreadline-dev (or the Python prompt is crap) libncursesw5-dev libssl-dev libgdbm-dev libsqlite3-dev libbz2-dev More optional: tk-dev libdb-dev Ubuntu has no packages for v1.8.5 of the Berkeley database, nor (for obvious reasons) the Sun audio hardware, so the bsddb185 and sunaudiodev modules will still not be built on Ubuntu, but all other modules are built with the above packages installed. Python 2.5 and Python 2.6 also needs to have LDFLAGS set on Ubuntu 11.04 and later, to handle the new multi-arch layout: export LDFLAGS="-L/usr/lib/$(dpkg-architecture -qDEB_HOST_MULTIARCH)" For Python 2.6 and 2.7 you also need to explicitly enable SSL after running the ./configure script and before running make. In Modules/Setup there are lines like this: #SSL=/usr/local/ssl #_ssl _ssl.c \ # -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \ # -L$(SSL)/lib -lssl -lcrypto Uncomment these lines and change the SSL variable to /usr: SSL=/usr _ssl _ssl.c \ -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \ -L$(SSL)/lib -lssl -lcrypto Python 2.6 also needs Modules/_ssl.c modified to be used with OpenSSL 1.0, which is used in Ubuntu 11.10. At around line 300 you'll find this: else if (proto_version == PY_SSL_VERSION_SSL3) self->ctx = SSL_CTX_new(SSLv3_method()); /* Set up context */ else if (proto_version == PY_SSL_VERSION_SSL2) self->ctx = SSL_CTX_new(SSLv2_method()); /* Set up context */ else if (proto_version == PY_SSL_VERSION_SSL23) self->ctx = SSL_CTX_new(SSLv23_method()); /* Set up context */ Change that into: else if (proto_version == PY_SSL_VERSION_SSL3) self->ctx = SSL_CTX_new(SSLv3_method()); /* Set up context */ #ifndef OPENSSL_NO_SSL2 else if (proto_version == PY_SSL_VERSION_SSL2) self->ctx = SSL_CTX_new(SSLv2_method()); /* Set up context */ #endif else if (proto_version == PY_SSL_VERSION_SSL23) self->ctx = SSL_CTX_new(SSLv23_method()); /* Set up context */ This disables SSL_v2 support, which apparently is gone in OpenSSL1.0.

  Read the article

• .wine-pipelight folder not present

  - by DaimyoKirby

  Following the instructions on the pipelight installation page, I installed pipelight on Ubuntu 14.04. However, upon opening firefox the .wine-pipelight folder isn't present in my home folder, and I get the following errors: [PIPELIGHT:LIN:unknown] attached to process. [PIPELIGHT:LIN:unknown] checking environment variable PIPELIGHT_SILVERLIGHT5_1_CONFIG. [PIPELIGHT:LIN:unknown] searching for config file pipelight-silverlight5.1. [PIPELIGHT:LIN:unknown] trying to load config file from '/home/alden/.config/pipelight-silverlight5.1'. [PIPELIGHT:LIN:silverlight5.1] basicplugin.c:427:checkSilverlightGraphicDriver(): error in execlp command - probably silverlightGraphicDriverCheck not found or missing execute permission. [PIPELIGHT:LIN:silverlight5.1] basicplugin.c:441:checkSilverlightGraphicDriver(): GPU driver check - Your driver is not in the whitelist, hardware acceleration disabled. [PIPELIGHT:LIN:silverlight5.1] using wine prefix directory /home/alden/.wine-pipelight. [PIPELIGHT:LIN:silverlight5.1] checking plugin installation - this might take some time. [PIPELIGHT:LIN:silverlight5.1] basicplugin.c:374:checkPluginInstallation(): error in execvp command - probably dependencyInstaller/sandbox not found or missing execute permission. [PIPELIGHT:LIN:silverlight5.1] basicplugin.c:384:checkPluginInstallation(): Plugin installer did not run correctly (exitcode = 1). [PIPELIGHT:LIN:silverlight5.1] basicplugin.c:108:attach(): plugin not correctly installed - aborting. I've reinstalled quite a few times and ran through many of the common fixes offered on the pipelight Launchpad pages and here on AskUbunta and still it fails to run. Is there a reason why this folder isn't present, or why I'm getting these errors? Edit: Oddly enough, the .wine-pipelight folder is created wtih I open Nitro, although this still doesn't fix the issue.

  Read the article

• Only One Month to OpenWorld-San Francisco!

  - by Stephen Slade

  From around the world, the city is expecting 50,000+ guests to flock to this annual extravaganza.  Over 2,000 sessions will focus on Oracle’s latest product offerings, customer case studies, panels of experts and a variety of other hardware, technology, middleware and applications. For those interested  in the latest capabilities delivered by Oracle’s supply chain applications, the ‘Focus-On’ documents are now avaiable to help guide you in your schedule builder. Schedule builder allows the capability to create a personalized agenda for the sessions you wish to attend, such as: Monday October 1, 2012 TIME TITLE LOCATION  3:15 pm –4:15 pm General Session: Supply Chain Management—Strategy, Update, and Roadmap Richard Jewell, Senior Vice President, Applications Development, Oracle Moscone West Level 2 Room 3014 Tuesday October 2, 2012 TIME TITLE LOCATION  10:15 am –11:15 am Oracle Fusion Supply Chain Management: Overview, Strategy, Customer Experiences, and Roadmap Jon Chorley, CSO & VP, Product Strategy, Oracle Moscone West  Level 2 Room 2006 There is an exciting lineup of about 100 supply chain sessions at OpenWorld. Contact your sales rep or Oracle Partner to obtain a copy of the most current Focus-On document, segmented by pillars such as Manufacturing, Maintenance/EAM, Value Chain Planning, Value Chain Execution, Procurement and Agile/Product Lifecycle Management.  They will provide you with a better informed view to schedule your time in San Francisco.

  Read the article

• New technical product guide for Sun Ray clients

  - by Jaap

  In the Oracle online documentation system a new Sun Ray clients Technical Product guide has been published. The document provides detailed information about the similarities and differences between the three Sun Ray client hardware models: Sun Ray 3, Sun Ray 3 plus and Sun Ray 3i. From the description of the Technical Product guide I want to quote the following section: "......Since Sun Ray 3 Series Clients have no local operating system and require no local management, they eliminate the complexity, expenses, and security vulnerabilities associated with other thin client and PC solutions. ......" This is always one of the great advantages of Sun Ray clients compared to other thin clients (which are actually low-fat PCs where you have to manage thin client OS images). The guide lists the features and technical specifications of the Sun Ray Client such as number of ports, chassis, graphics, network interfaces, power supply, operating conditions, MTBF, reliability, and other standards. The guide also contains a separate chapter about environmental data. As you may know, the Sun Ray 3 Series clients are designed specifically to be sensitive to a spectrum of environmental concerns and standards, from materials to manufacturing processes to shipping, operation, and end of life. The Sun Ray 3 Series clients complies to environmental standards and certifications such as Energy Star 5.0, EPEAT, WEEE and RoHS (see the Oracle policy for RoHS and REACH).

  Read the article

• Trouble installing Server 12.10 - Dead keyboard, Blank Screen, Network Config

  - by Mikey

  Installing 12.10 server from cd - minimal installation: basic system, ssh server,postgreSQL, manual updates. Hardware is brand new HP server that also runs Win 2003 Server Standard as a DNC excellently - I installed the grub boot manager on the primary partition and it is working fine - can boot to Win or Ubuntu without issue. Everything seemed to go OK on the installation - BUT when I restarted the system after install and booted to Ubuntu, I got the command prompt for Ubuntu, but the keyboard was UNREPSONSIVE - dead. There is nothing wrong with the keyboard - works fine if I boot to Win. With a completely unrepsonsive keyboard I had to hit the power switch - when I restarted and booted to Ubuntu, Ubuntu started but no command prompt came up at all - just black screen. I powered down and rebooted to advanced Ubuntu options - it tried to reinstall/initliaze a long list of packages - when it got to 'waiting for network configuration' it waited, then a message 'waiting 60 seconds for network configuration'... it waited 60 seconds and then I got a 'failed to configure network message' and it continued. Finally it finished, I hit enter and got to a prompt - but again, keyboard UNREPSONSIVE - dead. I went through this several times - tried 'repairing broken installation' option and also reinstalling entirely - always same results. I am flummoxed. The only clue I have is that for the Windows DNC config, the IP address is static - not via DHCP. But I don't think that should impact Ubuntu at all - perhaps I am mistaken. What is wrong?

  Read the article

• 2D graphics - why use spritesheets?

  - by Columbo

  I have seen many examples of how to render sprites from a spritesheet but I havent grasped why it is the most common way of dealing with sprites in 2d games. I have started out with 2d sprite rendering in the few demo applications I've made by dealing with each animation frame for any given sprite type as its own texture - and this collection of textures is stored in a dictionary. This seems to work for me, and suits my workflow pretty well, as I tend to make my animations as gif/mng files and then extract the frames to individual pngs. Is there a noticeable performance advantage to rendering from a single sheet rather than from individual textures? With modern hardware that is capable of drawing millions of polygons to the screen a hundred times a second, does it even matter for my 2d games which just deal with a few dozen 50x100px rectangles? The implementation details of loading a texture into graphics memory and displaying it in XNA seems pretty abstracted. All I know is that textures are bound to the graphics device when they are loaded, then during the game loop, the textures get rendered in batches. So it's not clear to me whether my choice affects performance. I suspect that there are some very good reasons most 2d game developers seem to be using them, I just don't understand why.

  Read the article

• File saving disabled 'Saving has been disabled by system admin'

  - by Gubuntu

  I have coded my own html website recently, and today wished to add a Google calender object to it. I have not put this website on the web because it is for my own personal use and I can't buy a domain. So I just have a folder on my pc that I load the index.html from now and then. As I was saying, today I got an error while trying to save the Google calender object in. I am system admin on my PC, in fact no one else uses but me, except when I have friends round, but for once my PC seems to think I'm some standard account user, because I couldn't save. I thought of clicking close and seeing if it came up with save as, but it didn't, it said 'Are you sure you want to close without saving?' or something along the lines of that, and 'Saving has been disabled by your system admin.' I couldn't do anything. I tried looking at the settings of the file, and it had me as read only in one of the selections, so I changed that to read & write, but to no avail. I did not save as root when I last edited the file, so I don't get what's going on. Help! P.S. This is on Ask Ubuntu not Superuser because it is on my Ubuntu PC and it appears to be a problem with Ubuntu not root or hardware.

  Read the article

• How to check system performance?

  - by Woltan

  Hi all, I am a new Ubuntu user and really like the look and the features of the OS. However, I have a feeling that the performance could be better. With that I mean: Somehow the scrolling within firefox of sites seems laggy. I do not know how I should measure it but there is a difference. Not that it is unusable but it is aggravating. Java programs are running really slow. As a comparison (I know it is not a fair one), I tried to run a game using wine. The graphic specifications using windows were much higher (1600x1200) with a high level of detail, and in ubuntu with the lowest level of detail 1024x768 was the maximum. (My graphics card is a GeForce GTS 450 with 1gb RAM) Coming to my question: Is there a way to measure the performance of 3D acceleration, java applets, firefox scrolling etc. with a tool and compare it with lets say a windows OS or other users having almost the same hardware? Maybe it is a setup issue where some fundamental drivers are missing or something!? Any help, link, suggestion is appreciated! Cherio Woltan

  Read the article

• Lightest weight ubuntu desktop for text editing in big terminal windows?

  - by Kevin Pauli

  I have an older windows laptop onto which I'm installing ubuntu within a VM. My goal is just to use terminal-based linux tools such as vim and shell scripting. I don't give a hoot about any gui for this box. So I first installed ubuntu minimalcd and chose "Basic Ubuntu Server". Upon boot, the text-based terminal came up and I logged in, but the problem is it only gives me 80 columns. I want to do terminal mode vim but have a couple hundred columns to take advantage of my large monitor. If you happen to know how to do that, please see my question here . This post is assuming that the other question is not answerable, and that I will need a desktop to get more than 80 columns in a terminal window. So if that is the case, I want the lightest weight one possible, because this is older hardware and all I want is the ability to have nice big text-based terminal windows for editing text. From the ubuntu minimal CD, I see options for Edubuntu, Kubuntu, etc. Which one of the available desktops would be a good choice for my needs?

  Read the article

• Intel 82576 Network card

  - by No1_Melman

  I have an Intel dual port pcie NIC card with two 82576 interfaces according to ubuntu 12.04. I run the command sudo lshw -html > /home/melman/Documents/hardware.html and it shows both of the interfaces but they're grayed out?! How can enable them? ifconfig output: bond0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:192.168.100.2 Bcast:192.168.100.255 Mask:255.255.255.0 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth0 Link encap:Ethernet HWaddr e0:69:95:d1:db:ff inet addr:192.168.10.63 Bcast:192.168.10.255 Mask:255.255.255.0 inet6 addr: fe80::e269:95ff:fed1:dbff/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2903 errors:0 dropped:0 overruns:0 frame:0 TX packets:2627 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1524738 (1.5 MB) TX bytes:430196 (430.1 KB) Interrupt:20 Memory:f7f00000-f7f20000 eth3 Link encap:Ethernet HWaddr 00:50:b6:50:a7:f9 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth4 Link encap:Ethernet HWaddr 00:1b:21:6e:99:77 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Memory:f7c00000-f7c20000 eth5 Link encap:Ethernet HWaddr 00:1b:21:6e:99:76 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Memory:f7c20000-f7c40000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:246 errors:0 dropped:0 overruns:0 frame:0 TX packets:246 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:17584 (17.5 KB) TX bytes:17584 (17.5 KB)

  Read the article

• Stop Your Mouse from Waking Up Your Windows 7 Computer

  - by The Geek

  If you use Sleep Mode on your PC, have you ever noticed that moving your mouse will wake the computer from sleep mode? If you would prefer to only have the PC wake up when you hit a key instead, there’s a simple tweak. Just type Mouse into the start menu search box, or the Control Panel search box, and then open up the Mouse Properties panel. Find the Hardware tab, select your mouse in the list, and then click the Properties button. You’ll have to click the “Change settings” button before you can see the Power Management tab… And now, you can uncheck the box from “Allow this device to wake the computer”. That’s all there is to it. Similar Articles Productive Geek Tips Stop the Mouse From Waking Up Your Computer from Sleep ModeFix "Sleep Mode Randomly Waking Up" Issue in Windows VistaTemporarily Disable Windows Update’s Automatic Reboot in Win7 or VistaDisable Aero Snap (the Mouse Drag Window Arranging Feature in Windows 7)New Year’s Resolutions: Use Your Computer as an Alarm Clock the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi LocPDF is a Visual PDF Search Tool Download Free iPad Wallpapers at iPad Decor Get Your Delicious Bookmarks In Firefox’s Awesome Bar

  Read the article

• Using USB to Ethernet with Linux Ubuntu 12.04

  - by Sriram

  Being a newbie, Please excuse if the technical Jargon used is not an universally accepted one :) I have a particular device (say device A) whose USB2.0 driver is available from Linux community. Linux UBUNTU12.04 based PC is able to detect that device via the available driver. My requirement is to ensure that PC can exchange the command as well as data with the device A over TCP/IP packets (In other words, instead of just a USB Based driver, there should be a TCP/IP wrapper over the device USB driver and still does the same job as the USB driver was doing before) Bought an USB (Female) to RJ-45 adapter,connected Device A (male) USB to the USB Female end of the adapter and the Ethernet end connected to the router. PC also is connected to the same router so that both Device A and the PC have the IP address in the same subnet range. So the packets produced by the device A can be routed to the PC via some binding( not sure how I can achieve this, but conceptual idea) Here are the issues I can see as of now 1) USB to RJ-45 is just a hardware signal conversion and not a NIC in itself and hence no MAC/IP ADDRESS assigned. Can we bind a virtual NIC created in PC with this connector? 2) Any available USB TO IP command as well as data translation wrappers available? e.g. command for the device A on Ethernet converted to command for the device A on USB which is then acted upon the device as a command from the USB driver There is some missing link in my understanding and hence it would be of great help if you can bounce off some ideas on how I can take this forward so that Device A and PC exchange data over IP. Thanks and Regards, Sriram

  Read the article

• Acceptable sound quality: stereo needed for an Android game?

  - by Thomas Calc

  I have various simple short sound effects (damage sound, dying sound, thunderbolt, fanfare, breaking) for a game that is developed for Android currently. I use OGG files: 96kbps VBR, 44.1KHz, 2 channels (that means stereo, right?). I read the other stackexchange topics about "acceptable sound quality", but they're too general, address too many things. My experience is that even with 80kbps, my effects sound OK. But I tested it on a limited number of Android devices (including a Sony Ericsson Xperia Neo and a HTC Desire HD). My questions: For mobile phones and tablets, generally, what parameters are recommended? Won't my 80kbps sounds be bad on a newer device (such as a modern tablet)? I don't hear any difference between stereo and mono (2 channels vs. 1 channel, right?), is there any noticeable difference at all for mobile phones / tablets? (in terms of the player experience) May it worth it at all? I assume that stereo sounds take much more in memory (when they're decoded to PCM), despite of the fact that the compressed OGG size is practically the same. Reacting to Roy T.'s great comment: Actually, I couldn't measure the PCM size (Android decodes OGG internally), but I thought that stereo will take more space than mono when uncompressed After throwing out one of the WAV channels in Audacity, and re-exporting it: The new WAV file size is half than before The OGG file size is practically the same as before The sound effects and game music was recorded by my friend who is an experienced hobby musician/composer, but he knows little about computers & software so he just gave me some high-quality WAV files generated via his hardware.These were stereo, but if I check them in Audacity, both channels appear to be exactly the same.Can I consider them the same (= moving to mono), or might there be some unnoticeable differences to the human eye?

  Read the article

• IoT? Time for Enterprise Architecture

  - by OTN ArchBeat

  Of course you've been listening to the latest OTN ArchBeat Podcast on the challenges and opportunities in the Internet of Things. If so, you'll also be interested in ZDNet blogger Joe McKendricks' recent post, Will the 'Internet of Things' make CIOs' jobs harder?. In that post McKendrick offers this important bit of advice that will certainly have architects saying "I told you so." Enterprises need to develop architectural approaches to the management of data. Meaning the development of repeatable processes to source, ingest, transform and store information. For years, IT managers simply bought more hardware and addressed data with on-off integration projects. Now it's time for enterprise architecture. IoT is an important new phase in the evolution of enterprise IT. Challenging? You bet! But meeting any such challenge requires big, broad thinking and planning. In that context Enterprise Architecture has always been important. But as IoT gains traction and speed, enterprise architecture should be top of mind for all concerned.

  Read the article

• Suitability of ground fog using layered alpha quads?

  - by Nick Wiggill

  A layered approach would use a series of massive alpha-textured quads arranged parallel to the ground, intersecting all intervening terrain geometry, to provide the illusion of ground fog quite effectively from high up, looking down, and somewhat less effectively when inside the fog and looking toward the horizon (see image below). Alternatively, a shader-heavy approach would instead calculate density as function of view distance into the ground fog substrate, and output the fragment value based on that. Without having to performance-test each approach myself, I would like first to hear others' experiences (not speculation!) on what sort of performance impact the layered alpha texture approach is likely to have. I ask specifically due to the oft-cited impacts of overdraw (not sure how fill-rate bound your average desktop system is). A list of games using this approach, particularly older games, would be immensely useful: if this was viable on pre DX9/OpenGL2 hardware, it is likely to work fine for me. One big question is in regards to this sort of effect: (Image credit goes to Lume of lume.com) Notice how the vertical fog gradation is continuous / smooth. OTOH, using textured quad layers, I can only assume that layers would be mighty obvious when walking through them -- the more sparse they were, the more obvious this would be. This is in contrast to where fog planes are aligned to face the player every frame, where this coarseness would be much less obvious.

  Read the article

• Very slow write access to SSD disks on some Asus P8Z77 motherboards

  - by lenik

  I have Asus P8Z77-V LK motherboard, that ran Mint 13 (based on Ubuntu 12.04) just perfectly, but recently I've tried to install Mint 17 and noticed abysmal write performance. Write speed on SSD disk was about 1.5MB/sec, when it's supposed to be in 150-250MB/sec range. For write testing I've used dd if=/dev/zero of=/dev/sda bs=10M count=10 while booted up from LiveCD. I have also tested the read speed with hdparm -tT /dev/sda and got about 440MB/sec -- that's normal. I can tell, the read performance has not degraded at all and is not an issue here. Since I had a few different SSD disks and few motherboards, I've tested and tested and here are results: Asus P8H77 works fine with Mint13, has very slow write speed starting from Mint14. Asus P8Z77-V LK works with Mint13, has very slow write speed starting from Mint14. Asus P8Z77-V PRO works with Mint13, and works just fine with Mint14, 15, 16 and 17. The only difference between "PRO" version and others is that it has extra SATA controller onboard (in addition to the Z77 chipset SATA controller) providing extra 2 SATA ports. SSD disks work fine with "PRO" version when connected to the native SATA ports as well as to the ports provided by extra SATA controller, so this does not look like a hardware issue. As far as I can tell, there's something changed in the kernel while going from 3.2 to 3.5, that affects the detection of onboard SATA controller for Asus P8*77 motherboards, that screws up the write speed for SSD drives. Could anyone shed some light on how to fix this issue or, possibly, give a pointer to a more suitable place to ask this question?

  Read the article

• xorg, nvidia, log-in all hosed - how can I completely reset graphics set-up/settings?

  - by Fred Hamilton

  I just did a fresh install of Mythbuntu 12.04.1 on my Intel MB with nVidia 9500GT graphics card. Hardware's been working great with 10.10 for about 2 years. Background: (optional - feel free to skip to question) I was trying to get my component video output to generate 720p, messing around with the nvidia drivers, and now the entire display system is hosed. I can SSH in and get a terminal. Depending on which nvidia package I install/remove, I get: Garbage on screen (after I "apt-get remove nvidia*") A low-res graphical log-in screen where I can log in as fred or guest. If I log in as fred, it displays some text mode status line then goes right back to the log-in screen. If I log in as guest, I actually get the full Ubuntu desktop, but I need to be able to log in as fred. Other times I get an error: "API mismatch: the NVIDIA kernel module has version 304.43, but this NVIDIA driver component has version 295.49." I've googled around, including trying this thread with the same error message, but to no effect. Question: How can I just reset x settings, drivers, everything display-related to the exact same way it was after a fresh install?

  Read the article

• Cinnamon Settings Panel Blank After v 2.0.6

  - by Cinnamon Challenge

  After cinnamon upgrade to 2.0.6-20131026040307-precise via synaptic, the "cinnamon settings" gui or window is broken. It appears blank, only showing the configuration category icons for "Appearance", "Preferences", "Hardware", and "Administration". The icons that should be within these categories are gone. I don't know if cinnamon-control-center was removed during the last cinnamon update, but this issue began on Oct. 25. When running cinnamon-settings from terminal, several errors appear such as this: Could not load screen module; is the cinnamon-control-center package installed? /usr/lib/cinnamon-settings/modules/cs_user.py:112: Warning: g_object_unref: assertion `G_IS_OBJECT (object)' failed file_icon = Gio.FileIcon().new(file) (cinnamon-settings.py:5471): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkMenuItem, but as a GtkBin subclass a GtkMenuItem can only contain one widget at a time; it already contains a widget of type GtkAccelLabel Could not find network module; is the cinnamon-control-center package installed? cinnamon-control-center is not installed in synaptic, and when the module is marked for installation, unity is selected for removal. Is there any way to get this function back without removing unity? Release: Ubuntu 12.04 (precise) Kernel: 3.2.0-55-generic Desktop: Cinnamon 2.0.6-20131026040307-precise Some settings are still accessible through terminal by appending the name of the function to the command: cinnamon-settings panel cinnamon-settings calendar cinnamon-settings themes cinnamon-settings applets cinnamon-settings windows cinnamon-settings fonts cinnamon-settings hotcorner

  Read the article

< Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >