Search Results

Search found 105755 results on 4231 pages for 'learn sql server'.

Page 232/4231 | < Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >

• WGet from one site on a server to another site on the same server

  - by JoshReedSchramm

  Hey all, I've recently been asked to administer a couple ubuntu boxes running web servers. I'm a dev by trade so if this question is fairly noob please forgive. We have about a dozen sites running on this box. 2 of our sites need to talk back and forth over a restful api. Unfortunately we are having issues with the sited connection to each other via wget. When we try and run wget manually from the command line from the server pointing to a site also on that server it hangs and eventually times out. If we do the same thing from outside the server to the same site on the server it works. Is there something that could be preventing sites on the same server from communicating with each other? The same thing happens pinging the site from the server.

  Read the article

• Unattended Install of Zend Server license

  - by Zoop - Josh

  I have a Zend Server 5.6 development license and I wanted to know if there is a way to apply the license during install, rather than via the web interface after it has installed. I ask because I administer our server environment via Rightscale and have automated the creation of the server, however it still requires manual input for the license details. We regularly fire up a staging server to do final tests before pushing to production and it would be great if it were completely hands off.

  Read the article

• Restore a database with LDF file only

  - by Martin

  First of all, i know how stupid it is not to have a any backup. I can't help it, but i have to (try) to solve it. I have a transaction log (LDF) file from a SQL Server 2000 database that contains all transactions since the creation of the database. No truncation has been done. The MDF file is gone. Probably because of some disk failure. There is no backup. Not from the original database and not from the transaction log. I have tried to link the transaction log to a new clean database. But (ofcourse) that failed because SQL Server checks the identity of both files. I have read about software that can read the transaction log. ApexSQL seems to do that. I tried to install the trial version but it gives weird errors when trying to start the program. Anyone knows a solution for me? It may contain third party software, but i prefer a clean SQL Server solution.

  Read the article

• In-Place DC Upgrade from Server 2003R2 Standard to 2008 Enterprise

  - by Yadhu Tony

  We have a Domain controller in server 2008 Enterprise and Additional DC in server 2003 R2. Now I need to upgrade Additional Domain controller to Server 2008 Enterprise and raise the domain functional level to 2008. The DC is running with Active Directory, DNS and DHCP. The server is installed in VMware ESXi 4.0. Please guide me to carry out the upgrade. Also I want to know about the possible risk of in-place upgrade, if any.

  Read the article

• Cannot install SQL Server CE 4

  - by Manos Dilaverakis

  I'm trying to install SQL Server CE 4 on a WinXP Pro SP3 machine. I double-click on the file and absolutely nothing happens. There is nothing in the event viewer and the only effect I can see is the addition of an empty, randomly named folder in C:\ which looks something like C:\7c59aaeb5e43f6bdcb2430e923 I've tried this with both SQL Server CE 4 and the SP1 version. I've tried disabling the AV (Nod32) file protection but it didn't make a difference. I've checked the installed program list in case it's already installed, but I don't see it anywhere. I checked in C:\Program Files\Microsoft SQL Server Compact Edition\ and there's only the \3.5 folder in there from the already installed 3.5 version. Does anyone know what's going on or how I can further diagnose the problem? Edit in response to Ramhound: I have .NET 4 installed. Why, does it need a particular version? Edit in response to leinad13 I tried Process Explorer and filtered by the name of the temporary folder created. I see the following, but can't make much sense of it.

  Read the article

• Send email from different domains to different external IP's on a single server

  - by user140429

  I have set up a windows 2008 R2 server to route email from Exchange 2010 using SMTP Server in IIS. I have 3 seperate domains and would like to route each one through a different internal and external IP for (IP Reputation etc), at the minute it is only using the primary IP on the server to route email externally. Is this at all possible using SMTP Server in IIS, or is there any other software available to do this?

  Read the article

• Can you install Windows Messaging on Windows Server Core 2008 R2

  - by user179632

  We have Windows Server Core 2008 R2. We have successfully installed .NET and the Visual C++ runtimes. Our application requires the ability to post messages to an MSMQ server To be clear we do not want to install MSMQ server on the machine. However we want to be able to post messages to a remote MSMQ server so we need to install the client parts of Windows Messaging. Has anybody succeeded in doing this?

  Read the article

• OS X Server: SMTP Server problem

  - by plucked

  Hi, I have problem to setup my mail server. My system is a OS X 10.6.2. Server. I configured the mail server so far, but I cannot connect to the smtp server correctly. Correctly means that I can connect via telnet (and do the "HELO") from another server within the same serverrack, but not from outside. But when I try to telnet my http server, it works fine from outside. I already checked my firewall rules with "sudo ipfw list" and the port 25 is not blocked in any case. What could be the problem with connecting to port 25 via telnet from outside of the serverrack? Cheers

  Read the article

• Can LINQ-to-SQL omit unspecified columns on insert so a database default value is used?

  - by Todd Ropog

  I have a non-nullable database column which has a default value set. When inserting a row, sometimes a value is specified for the column, sometimes one is not. This works fine in TSQL when the column is omitted. For example, given the following table: CREATE TABLE [dbo].[Table1]( [id] [int] IDENTITY(1,1) NOT NULL, [col1] [nvarchar](50) NOT NULL, [col2] [nvarchar](50) NULL, CONSTRAINT [PK_Table1] PRIMARY KEY CLUSTERED ([id] ASC) ) GO ALTER TABLE [dbo].[Table1] ADD CONSTRAINT [DF_Table1_col1] DEFAULT ('DB default') FOR [col1] The following two statements will work: INSERT INTO Table1 (col1, col2) VALUES ('test value', '') INSERT INTO Table1 (col2) VALUES ('') In the second statement, the default value is used for col1. The problem I have is when using LINQ-to-SQL (L2S) with a table like this. I want to produce the same behavior, but I can't figure out how to make L2S do that. I want to be able to run the following code and have the first row get the value I specify and the second row get the default value from the database: var context = new DataClasses1DataContext(); var row1 = new Table1 { col1 = "test value", col2 = "" }; context.Table1s.InsertOnSubmit(row1); context.SubmitChanges(); var row2 = new Table1 { col2 = "" }; context.Table1s.InsertOnSubmit(row2); context.SubmitChanges(); If the Auto Generated Value property of col1 is False, the first row is created as desired, but the second row fails with a null error on col1. If Auto Generated Value is True, both rows are created with the default value from the database. I've tried various combinations of Auto Generated Value, Auto-Sync and Nullable, but nothing I've tried gives the behavior I want. L2S does not omit the column from the insert statement when no value is specified. Instead it does something like this: INSERT INTO Table1 (col1, col2) VALUES (null, '') ...which of course causes a null error on col1. Is there some way to get L2S to omit a column from the insert statement if no value is given? Or is there some other way to get the behavior I want? I need the default value at the database level because not all row inserts are done via L2S, and in some cases the default value is a little more complex than a hard coded value (e.g. creating the default based on another field) so I'd rather avoid duplicating that logic.

  Read the article

• SQL efficiency argument, add a column or solvable by query?

  - by theTurk

  I am a recent college graduate and a new hire for software development. Things have been a little slow lately so I was given a db task. My db skills are limited to pet projects with Rails and Django. So, I was a little surprised with my latest task. I have been asked by my manager to subclass Person with a 'Parent' table and add a reference to their custodian in the Person table. This is to facilitate going from Parent to Form when the custodian, not the Parent, is the FormContact. Here is a simplified, mock structure of a sql-db I am working with. I would have drawn the relationship tables if I had access to Visio. We have a table 'Person' and we have a table 'Form'. There is a table, 'FormContact', that relates a Person to a Form, not all Persons are related to a Form. There is a relationship table for Person to Person relationships (Employer, Parent, etc.) I've asked, "Why this couldn't be handled by a query?" Response, Inefficient. (Really!?!) So, I ask, "Why not have a reference to the Form? That would be more efficient since you wouldn't be querying the FormContacts table with the reference from child/custodian." Response, this would essentially make the Parent is a FormContact. (Fair enough.) I went ahead an wrote a query to get from non-FormContact Parent to Form, and tested on the production server. The response time was instantaneous. *SOME_VALUE* is the Parent's fk ID. SELECT FormID FROM FormContact WHERE FormContact.ContactID IN (SELECT SourceContactID FROM ContactRelationship WHERE (ContactRelationship.RelatedContactID = *SOME_VALUE*) AND (ContactRelationship.Relationship = 'Parent')); If I am right, "This is an unnecessary change." What should I do, defend my position or should I concede to the managers request? If I am wrong. What is my error? Is there a better solution than the manager's?

  Read the article

• Why won't C# accept a (seemingly) perfectly good Sql Server CE Query?

  - by VoidKing

  By perfectly good sql query, I mean to say that, inside WebMatrix, if I execute the following query, it works to perfection: SELECT page AS location, (len(page) - len(replace(UPPER(page), UPPER('o'), ''))) / len('o') AS occurences, 'pageSettings' AS tableName FROM PageSettings WHERE page LIKE '%o%' UNION SELECT pageTitle AS location, (len(pageTitle) - len(replace(UPPER(pageTitle), UPPER('o'), ''))) / len('o') AS occurences, 'ExternalSecondaryPages' AS tableName FROM ExternalSecondaryPages WHERE pageTitle LIKE '%o%' UNION SELECT eventTitle AS location, (len(eventTitle) - len(replace(UPPER(eventTitle), UPPER('o'), ''))) / len('o') AS occurences, 'MainStreetEvents' AS tableName FROM MainStreetEvents WHERE eventTitle LIKE '%o%' Here i am using 'o' as a static search string to search upon. No problem, but not exeactly very dynamic. Now, when I write this query as a string in C# and as I think it should be (and even as I have done before) I get a server-side error indicating that the string was not in the correct format. Here is a pic of that error: And (although I am only testing the output, should I get it to quit erring), here is the actual C# (i.e., the .cshtml) page that queries the database: @{ Layout = "~/Layouts/_secondaryMainLayout.cshtml"; var db = Database.Open("Content"); string searchText = Request.Unvalidated["searchText"]; string selectQueryString = "SELECT page AS location, (len(page) - len(replace(UPPER(page), UPPER(@0), ''))) / len(@0) AS occurences, 'pageSettings' AS tableName FROM PageSettings WHERE page LIKE '%' + @0 + '%' "; selectQueryString += "UNION "; selectQueryString += "SELECT pageTitle AS location, (len(pageTitle) - len(replace(UPPER(pageTitle), UPPER(@0), ''))) / len(@0) AS occurences, 'ExternalSecondaryPages' AS tableName FROM ExternalSecondaryPages WHERE pageTitle LIKE '%' + @0 + '%' "; selectQueryString += "UNION "; selectQueryString += "SELECT eventTitle AS location, (len(eventTitle) - len(replace(UPPER(eventTitle), UPPER(@0), ''))) / len(@0) AS occurences, 'MainStreetEvents' AS tableName FROM MainStreetEvents WHERE eventTitle LIKE '%' + @0 + '%'"; @:beginning <br/> foreach (var row in db.Query(selectQueryString, searchText)) { @:entry @:@row.location &nbsp; @:@row.occurences &nbsp; @:@row.tableName <br/> } } Since it is erring on the foreach (var row in db.Query(selectQueryString, searchText)) line, that heavily suggests that something is wrong with my query, however, everything seems right to me about the syntax here and it even executes to perfection if I query the database (mind you, un-parameterized) directly. Logically, I would assume that I have erred somewhere with the syntax involved in parameterizing this query, however, my double and triple checking (as well as, my past experience at doing this) insists that everything looks fine here. Have I messed up the syntax involved with parameterizing this query, or is something else at play here that I am overlooking? I know I can tell you, for sure, as it has been previously tested, that the value I am getting from the query string is, indeed, what I would expect it to be, but as there really isn't much else on the .cshtml page yet, that is about all I can tell you.

  Read the article

• httpd high cpu usage slowing down server response

  - by max

  my client has a image sharing website with about 100.000 visitor per day it has been slowed down considerably since this morning when i checked processes i've notice high cpu usage from http .... some has suggested ddos attack ... i'm not a webmaster and i've no idea whts going on top top - 20:13:30 up 5:04, 4 users, load average: 4.56, 4.69, 4.59 Tasks: 284 total, 3 running, 281 sleeping, 0 stopped, 0 zombie Cpu(s): 12.1%us, 0.9%sy, 1.7%ni, 69.0%id, 16.4%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 16037152k total, 15875096k used, 162056k free, 360468k buffers Swap: 4194288k total, 888k used, 4193400k free, 14050008k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 4151 apache 20 0 277m 84m 3784 R 50.2 0.5 0:01.98 httpd 4115 apache 20 0 210m 16m 4480 S 18.3 0.1 0:00.60 httpd 12885 root 39 19 4296 692 308 S 13.0 0.0 11:09.53 gzip 4177 apache 20 0 214m 20m 3700 R 12.3 0.1 0:00.37 httpd 2219 mysql 20 0 4257m 198m 5668 S 11.0 1.3 42:49.70 mysqld 3691 apache 20 0 206m 14m 6416 S 1.7 0.1 0:03.38 httpd 3934 apache 20 0 211m 17m 4836 S 1.0 0.1 0:03.61 httpd 4098 apache 20 0 209m 17m 3912 S 1.0 0.1 0:04.17 httpd 4116 apache 20 0 211m 17m 4476 S 1.0 0.1 0:00.43 httpd 3867 apache 20 0 217m 23m 4672 S 0.7 0.1 1:03.87 httpd 4146 apache 20 0 209m 15m 3628 S 0.7 0.1 0:00.02 httpd 4149 apache 20 0 209m 15m 3616 S 0.7 0.1 0:00.02 httpd 12884 root 39 19 22336 2356 944 D 0.7 0.0 0:19.21 tar 4054 apache 20 0 206m 12m 4576 S 0.3 0.1 0:00.32 httpd another top top - 15:46:45 up 5:08, 4 users, load average: 5.02, 4.81, 4.64 Tasks: 288 total, 6 running, 281 sleeping, 0 stopped, 1 zombie Cpu(s): 18.4%us, 0.9%sy, 2.3%ni, 56.5%id, 21.8%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 16037152k total, 15792196k used, 244956k free, 360924k buffers Swap: 4194288k total, 888k used, 4193400k free, 13983368k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 4622 apache 20 0 209m 16m 3868 S 54.2 0.1 0:03.99 httpd 4514 apache 20 0 213m 20m 3924 R 50.8 0.1 0:04.93 httpd 4627 apache 20 0 221m 27m 4560 R 18.9 0.2 0:01.20 httpd 12885 root 39 19 4296 692 308 S 18.9 0.0 11:51.79 gzip 2219 mysql 20 0 4257m 199m 5668 S 18.3 1.3 43:19.04 mysqld 4512 apache 20 0 227m 33m 4736 R 5.6 0.2 0:01.93 httpd 4520 apache 20 0 213m 19m 4640 S 1.3 0.1 0:01.48 httpd 4590 apache 20 0 212m 19m 3932 S 1.3 0.1 0:00.06 httpd 4573 apache 20 0 210m 16m 3556 R 1.0 0.1 0:00.03 httpd 4562 root 20 0 15164 1388 952 R 0.7 0.0 0:00.08 top 98 root 20 0 0 0 0 S 0.3 0.0 0:04.89 kswapd0 100 root 39 19 0 0 0 S 0.3 0.0 0:02.85 khugepaged 4579 apache 20 0 209m 16m 3900 S 0.3 0.1 0:00.83 httpd 4637 apache 20 0 209m 15m 3668 S 0.3 0.1 0:00.03 httpd ps aux [root@server ~]# ps aux | grep httpd root 2236 0.0 0.0 207524 10124 ? Ss 15:09 0:03 /usr/sbin/http d -k start -DSSL apache 3087 2.7 0.1 226968 28232 ? S 20:04 0:06 /usr/sbin/http d -k start -DSSL apache 3170 2.6 0.1 221296 22292 ? R 20:05 0:05 /usr/sbin/http d -k start -DSSL apache 3171 9.0 0.1 225044 26768 ? R 20:05 0:17 /usr/sbin/http d -k start -DSSL apache 3188 1.5 0.1 223644 24724 ? S 20:05 0:03 /usr/sbin/http d -k start -DSSL apache 3197 2.3 0.1 215908 17520 ? S 20:05 0:04 /usr/sbin/http d -k start -DSSL apache 3198 1.1 0.0 211700 13000 ? S 20:05 0:02 /usr/sbin/http d -k start -DSSL apache 3272 2.4 0.1 219960 21540 ? S 20:06 0:03 /usr/sbin/http d -k start -DSSL apache 3273 2.0 0.0 211600 12804 ? S 20:06 0:03 /usr/sbin/http d -k start -DSSL apache 3279 3.7 0.1 229024 29900 ? S 20:06 0:05 /usr/sbin/http d -k start -DSSL apache 3280 1.2 0.0 0 0 ? Z 20:06 0:01 [httpd] <defun ct> apache 3285 2.9 0.1 218532 21604 ? S 20:06 0:04 /usr/sbin/http d -k start -DSSL apache 3287 30.5 0.4 265084 65948 ? R 20:06 0:43 /usr/sbin/http d -k start -DSSL apache 3297 1.9 0.1 216068 17332 ? S 20:06 0:02 /usr/sbin/http d -k start -DSSL apache 3342 2.7 0.1 216716 17828 ? S 20:06 0:03 /usr/sbin/http d -k start -DSSL apache 3356 1.6 0.1 217244 18296 ? S 20:07 0:01 /usr/sbin/http d -k start -DSSL apache 3365 6.4 0.1 226044 27428 ? S 20:07 0:06 /usr/sbin/http d -k start -DSSL apache 3396 0.0 0.1 213844 16120 ? S 20:07 0:00 /usr/sbin/http d -k start -DSSL apache 3399 5.8 0.1 215664 16772 ? S 20:07 0:05 /usr/sbin/http d -k start -DSSL apache 3422 0.7 0.1 214860 17380 ? S 20:07 0:00 /usr/sbin/http d -k start -DSSL apache 3435 3.3 0.1 216220 17460 ? S 20:07 0:02 /usr/sbin/http d -k start -DSSL apache 3463 0.1 0.0 212732 15076 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3492 0.0 0.0 207660 7552 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3493 1.4 0.1 218092 19188 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3500 1.9 0.1 224204 26100 ? R 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3501 1.7 0.1 216916 17916 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3502 0.0 0.0 207796 7732 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3505 0.0 0.0 207660 7548 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3529 0.0 0.0 207660 7524 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3531 4.0 0.1 216180 17280 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3532 0.0 0.0 207656 7464 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3543 1.4 0.1 217088 18648 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3544 0.0 0.0 207656 7548 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3545 0.0 0.0 207656 7560 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3546 0.0 0.0 207660 7540 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3547 0.0 0.0 207660 7544 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3548 2.3 0.1 216904 17888 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3550 0.0 0.0 207660 7540 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3551 0.0 0.0 207660 7536 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3552 0.2 0.0 214104 15972 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3553 6.5 0.1 216740 17712 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3554 6.3 0.1 216156 17260 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3555 0.0 0.0 207796 7716 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3556 1.8 0.0 211588 12580 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3557 0.0 0.0 207660 7544 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3565 0.0 0.0 207660 7520 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3570 0.0 0.0 207660 7516 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL apache 3571 0.0 0.0 207660 7504 ? S 20:08 0:00 /usr/sbin/http d -k start -DSSL root 3577 0.0 0.0 103316 860 pts/2 S+ 20:08 0:00 grep httpd httpd error log [Mon Jul 01 18:53:38 2013] [error] [client 2.178.12.67] request failed: error reading the headers, referer: http://akstube.com/image/show/27023/%D9%86%DB%8C%D9%88%D8%B4%D8%A7-%D8%B6%DB%8C%D8%BA%D9%85%DB%8C-%D9%88-%D8%AE%D9%88%D8%A7%D9%87%D8%B1-%D9%88-%D9%87%D9%85%D8%B3%D8%B1%D8%B4 [Mon Jul 01 18:55:33 2013] [error] [client 91.229.215.240] request failed: error reading the headers, referer: http://akstube.com/image/show/44924 [Mon Jul 01 18:57:02 2013] [error] [client 2.178.12.67] Invalid method in request [Mon Jul 01 18:57:02 2013] [error] [client 2.178.12.67] File does not exist: /var/www/html/501.shtml [Mon Jul 01 19:21:36 2013] [error] [client 127.0.0.1] client denied by server configuration: /var/www/html/server-status [Mon Jul 01 19:21:36 2013] [error] [client 127.0.0.1] File does not exist: /var/www/html/403.shtml [Mon Jul 01 19:23:57 2013] [error] [client 151.242.14.31] request failed: error reading the headers [Mon Jul 01 19:37:16 2013] [error] [client 2.190.16.65] request failed: error reading the headers [Mon Jul 01 19:56:00 2013] [error] [client 151.242.14.31] request failed: error reading the headers Not a JPEG file: starts with 0x89 0x50 also there is lots of these in the messages log Jul 1 20:15:47 server named[2426]: client 203.88.6.9#11926: query (cache) 'www.xxxmaza.com/A/IN' denied Jul 1 20:15:47 server named[2426]: client 203.88.6.9#26255: query (cache) 'www.xxxmaza.com/A/IN' denied Jul 1 20:15:48 server named[2426]: client 203.88.6.9#20093: query (cache) 'www.xxxmaza.com/A/IN' denied Jul 1 20:15:48 server named[2426]: client 203.88.6.9#8672: query (cache) 'www.xxxmaza.com/A/IN' denied Jul 1 15:45:07 server named[2426]: client 203.88.6.9#39352: query (cache) 'www.xxxmaza.com/A/IN' denied Jul 1 15:45:08 server named[2426]: client 203.88.6.9#25382: query (cache) 'www.xxxmaza.com/A/IN' denied Jul 1 15:45:08 server named[2426]: client 203.88.6.9#9064: query (cache) 'www.xxxmaza.com/A/IN' denied Jul 1 15:45:09 server named[2426]: client 203.88.23.9#35375: query (cache) 'xxxmaza.com/A/IN' denied Jul 1 15:45:09 server named[2426]: client 203.88.6.9#61932: query (cache) 'www.xxxmaza.com/A/IN' denied Jul 1 15:45:09 server named[2426]: client 203.88.23.9#4423: query (cache) 'xxxmaza.com/A/IN' denied Jul 1 15:45:09 server named[2426]: client 203.88.6.9#40229: query (cache) 'www.xxxmaza.com/A/IN' denied Jul 1 15:45:14 server named[2426]: client 203.88.23.9#46128: query (cache) 'xxxmaza.com/A/IN' denied Jul 1 15:45:14 server named[2426]: client 203.88.6.10#62128: query (cache) 'www.xxxmaza.com/A/IN' denied Jul 1 15:45:14 server named[2426]: client 203.88.23.9#35240: query (cache) 'xxxmaza.com/A/IN' denied Jul 1 15:45:14 server named[2426]: client 203.88.6.10#36774: query (cache) 'www.xxxmaza.com/A/IN' denied Jul 1 15:45:14 server named[2426]: client 203.88.23.9#28361: query (cache) 'xxxmaza.com/A/IN' denied Jul 1 15:45:14 server named[2426]: client 203.88.6.10#14970: query (cache) 'www.xxxmaza.com/A/IN' denied Jul 1 15:45:14 server named[2426]: client 203.88.23.9#20216: query (cache) 'www.xxxmaza.com/A/IN' denied Jul 1 15:45:14 server named[2426]: client 203.88.23.10#31794: query (cache) 'xxxmaza.com/A/IN' denied Jul 1 15:45:14 server named[2426]: client 203.88.23.9#23042: query (cache) 'www.xxxmaza.com/A/IN' denied Jul 1 15:45:14 server named[2426]: client 203.88.6.10#11333: query (cache) 'www.xxxmaza.com/A/IN' denied Jul 1 15:45:14 server named[2426]: client 203.88.23.10#41807: query (cache) 'xxxmaza.com/A/IN' denied Jul 1 15:45:14 server named[2426]: client 203.88.23.9#20092: query (cache) 'www.xxxmaza.com/A/IN' denied Jul 1 15:45:14 server named[2426]: client 203.88.6.10#43526: query (cache) 'www.xxxmaza.com/A/IN' denied Jul 1 15:45:15 server named[2426]: client 203.88.23.9#17173: query (cache) 'www.xxxmaza.com/A/IN' denied Jul 1 15:45:15 server named[2426]: client 203.88.23.9#62412: query (cache) 'www.xxxmaza.com/A/IN' denied Jul 1 15:45:15 server named[2426]: client 203.88.23.10#63961: query (cache) 'xxxmaza.com/A/IN' denied Jul 1 15:45:15 server named[2426]: client 203.88.23.10#64345: query (cache) 'xxxmaza.com/A/IN' denied Jul 1 15:45:15 server named[2426]: client 203.88.23.10#31030: query (cache) 'xxxmaza.com/A/IN' denied Jul 1 15:45:16 server named[2426]: client 203.88.6.9#17098: query (cache) 'www.xxxmaza.com/A/IN' denied Jul 1 15:45:16 server named[2426]: client 203.88.6.9#17197: query (cache) 'www.xxxmaza.com/A/IN' denied Jul 1 15:45:16 server named[2426]: client 203.88.6.9#18114: query (cache) 'www.xxxmaza.com/A/IN' denied Jul 1 15:45:16 server named[2426]: client 203.88.6.9#59138: query (cache) 'www.xxxmaza.com/A/IN' denied Jul 1 15:45:17 server named[2426]: client 203.88.6.9#28715: query (cache) 'www.xxxmaza.com/A/IN' denied Jul 1 15:48:33 server named[2426]: client 203.88.23.9#26355: query (cache) 'xxxmaza.com/A/IN' denied Jul 1 15:48:34 server named[2426]: client 203.88.23.9#34473: query (cache) 'xxxmaza.com/A/IN' denied Jul 1 15:48:34 server named[2426]: client 203.88.23.9#62658: query (cache) 'xxxmaza.com/A/IN' denied Jul 1 15:48:34 server named[2426]: client 203.88.23.9#51631: query (cache) 'xxxmaza.com/A/IN' denied Jul 1 15:48:35 server named[2426]: client 203.88.23.9#54701: query (cache) 'xxxmaza.com/A/IN' denied Jul 1 15:48:36 server named[2426]: client 203.88.6.10#63694: query (cache) 'xxxmaza.com/A/IN' denied Jul 1 15:48:36 server named[2426]: client 203.88.6.10#18203: query (cache) 'xxxmaza.com/A/IN' denied Jul 1 15:48:37 server named[2426]: client 203.88.6.10#9029: query (cache) 'xxxmaza.com/A/IN' denied Jul 1 15:48:38 server named[2426]: client 203.88.6.10#58981: query (cache) 'xxxmaza.com/A/IN' denied Jul 1 15:48:38 server named[2426]: client 203.88.6.10#29321: query (cache) 'xxxmaza.com/A/IN' denied Jul 1 15:49:47 server named[2426]: client 119.160.127.42#42355: query (cache) 'xxxmaza.com/A/IN' denied Jul 1 15:49:49 server named[2426]: client 119.160.120.42#46285: query (cache) 'xxxmaza.com/A/IN' denied Jul 1 15:49:53 server named[2426]: client 119.160.120.42#30696: query (cache) 'xxxmaza.com/A/IN' denied Jul 1 15:49:54 server named[2426]: client 119.160.127.42#14038: query (cache) 'xxxmaza.com/A/IN' denied Jul 1 15:49:55 server named[2426]: client 119.160.120.42#33586: query (cache) 'xxxmaza.com/A/IN' denied Jul 1 15:49:56 server named[2426]: client 119.160.127.42#55114: query (cache) 'xxxmaza.com/A/IN' denied

  Read the article

• SQL Server and Hyper-V Dynamic Memory - Part 1

  - by SQLOS Team

  SQL and Dynamic Memory Blog Post Series   Hyper-V Dynamic Memory is a new feature in Windows Server 2008 R2 SP1 that allows the memory assigned to guest virtual machines to vary according to demand. Using this feature with SQL Server is supported, but how well does it work in an environment where available memory can vary dynamically, especially since SQL Server likes memory, and is not very eager to let go of it? The next three posts will look at this question in detail. In Part 1 Serdar Sutay, a program manager in the Windows Hyper-V team, introduces Dynamic Memory with an overview of the basic architecture, configuration and monitoring concepts. In subsequent parts we will look at SQL Server memory handling, and develop some guidelines on using SQL Server with Dynamic Memory.   Part 1: Dynamic Memory Introduction   In virtualized environments memory is often the bottleneck for reaching higher VM densities. In Windows Server 2008 R2 SP1 Hyper-V introduced a new feature “Dynamic Memory” to improve VM densities on Hyper-V hosts. Dynamic Memory increases the memory utilization in virtualized environments by enabling VM memory to be changed dynamically when the VM is running.   This brings up the question of how to utilize this feature with SQL Server VMs as SQL Server performance is very sensitive to the memory being used. In the next three posts we’ll discuss the internals of Dynamic Memory, SQL Server Memory Management and how to use Dynamic Memory with SQL Server VMs.   Memory Utilization Efficiency in Virtualized Environments   The primary reason memory is usually the bottleneck for higher VM densities is that users tend to be generous when assigning memory to their VMs. Here are some memory sizing practices we’ve heard from customers:   ·         I assign 4 GB of memory to my VMs. I don’t know if all of it is being used by the applications but no one complains. ·         I take the minimum system requirements and add 50% more. ·         I go with the recommendations provided by my software vendor.   In reality correctly sizing a virtual machine requires significant effort to monitor the memory usage of the applications. Since this is not done in most environments, VMs are usually over-provisioned in terms of memory. In other words, a SQL Server VM that is assigned 4 GB of memory may not need to use 4 GB.   How does Dynamic Memory help?   Dynamic Memory improves the memory utilization by removing the requirement to determine the memory need for an application. Hyper-V determines the memory needed by applications in the VM by evaluating the memory usage information in the guest with Dynamic Memory. VMs can start with a small amount of memory and they can be assigned more memory dynamically based on the workload of applications running inside.   Overview of Dynamic Memory Concepts   ·         Startup Memory: Startup Memory is the starting amount of memory when Dynamic Memory is enabled for a VM. Dynamic Memory will make sure that this amount of memory is always assigned to the VMs by default.   ·         Maximum Memory: Maximum Memory specifies the maximum amount of memory that a VM can grow to with Dynamic Memory. ·         Memory Demand: Memory Demand is the amount determined by Dynamic Memory as the memory needed by the applications in the VM. In Windows Server 2008 R2 SP1, this is equal to the total amount of committed memory of the VM. ·         Memory Buffer: Memory Buffer is the amount of memory assigned to the VMs in addition to their memory demand to satisfy immediate memory requirements and file cache needs.   Once Dynamic Memory is enabled for a VM, it will start with the “Startup Memory”. After the boot process Dynamic Memory will determine the “Memory Demand” of the VM. Based on this memory demand it will determine the amount of “Memory Buffer” that needs to be assigned to the VM. Dynamic Memory will assign the total of “Memory Demand” and “Memory Buffer” to the VM as long as this value is less than “Maximum Memory” and as long as physical memory is available on the host.   What happens when there is not enough physical memory available on the host?   Once there is not enough physical memory on the host to satisfy VM needs, Dynamic Memory will assign less than needed amount of memory to the VMs based on their importance. A concept known as “Memory Weight” is used to determine how much VMs should be penalized based on their needed amount of memory. “Memory Weight” is a configuration setting on the VM. It can be configured to be higher for the VMs with high performance requirements. Under high memory pressure on the host, the “Memory Weight” of the VMs are evaluated in a relative manner and the VMs with lower relative “Memory Weight” will be penalized more than the ones with higher “Memory Weight”.   Dynamic Memory Configuration   Based on these concepts “Startup Memory”, “Maximum Memory”, “Memory Buffer” and “Memory Weight” can be configured as shown below in Windows Server 2008 R2 SP1 Hyper-V Manager. Memory Demand is automatically calculated by Dynamic Memory once VMs start running.     Dynamic Memory Monitoring    In Windows Server 2008 R2 SP1, Hyper-V Manager displays the memory status of VMs in the following three columns:         ·         Assigned Memory represents the current physical memory assigned to the VM. In regular conditions this will be equal to the sum of “Memory Demand” and “Memory Buffer” assigned to the VM. When there is not enough memory on the host, this value can go below the Memory Demand determined for the VM. ·         Memory Demand displays the current “Memory Demand” determined for the VM. ·         Memory Status displays the current memory status of the VM. This column can represent three values for a VM: o   OK: In this condition the VM is assigned the total of Memory Demand and Memory Buffer it needs. o   Low: In this condition the VM is assigned all the Memory Demand and a certain percentage of the Memory Buffer it needs. o   Warning: In this condition the VM is assigned a lower memory than its Memory Demand. When VMs are running in this condition, it’s likely that they will exhibit performance problems due to internal paging happening in the VM.    So far so good! But how does it work with SQL Server?   SQL Server is aggressive in terms of memory usage for good reasons. This raises the question: How do SQL Server and Dynamic Memory work together? To understand the full story, we’ll first need to understand how SQL Server Memory Management works. This will be covered in our second post in “SQL and Dynamic Memory” series. Meanwhile if you want to dive deeper into Dynamic Memory you can check the below posts from the Windows Virtualization Team Blog:   http://blogs.technet.com/virtualization/archive/2010/03/18/dynamic-memory-coming-to-hyper-v.aspx   http://blogs.technet.com/virtualization/archive/2010/03/25/dynamic-memory-coming-to-hyper-v-part-2.aspx   http://blogs.technet.com/virtualization/archive/2010/04/07/dynamic-memory-coming-to-hyper-v-part-3.aspx   http://blogs.technet.com/b/virtualization/archive/2010/04/21/dynamic-memory-coming-to-hyper-v-part-4.aspx   http://blogs.technet.com/b/virtualization/archive/2010/05/20/dynamic-memory-coming-to-hyper-v-part-5.aspx   http://blogs.technet.com/b/virtualization/archive/2010/07/12/dynamic-memory-coming-to-hyper-v-part-6.aspx   - Serdar Sutay   Originally posted at http://blogs.msdn.com/b/sqlosteam/

  Read the article

• SQL Server and Hyper-V Dynamic Memory - Part 1

  - by SQLOS Team

  SQL and Dynamic Memory Blog Post Series   Hyper-V Dynamic Memory is a new feature in Windows Server 2008 R2 SP1 that allows the memory assigned to guest virtual machines to vary according to demand. Using this feature with SQL Server is supported, but how well does it work in an environment where available memory can vary dynamically, especially since SQL Server likes memory, and is not very eager to let go of it? The next three posts will look at this question in detail. In Part 1 Serdar Sutay, a program manager in the Windows Hyper-V team, introduces Dynamic Memory with an overview of the basic architecture, configuration and monitoring concepts. In subsequent parts we will look at SQL Server memory handling, and develop some guidelines on using SQL Server with Dynamic Memory.   Part 1: Dynamic Memory Introduction   In virtualized environments memory is often the bottleneck for reaching higher VM densities. In Windows Server 2008 R2 SP1 Hyper-V introduced a new feature “Dynamic Memory” to improve VM densities on Hyper-V hosts. Dynamic Memory increases the memory utilization in virtualized environments by enabling VM memory to be changed dynamically when the VM is running.   This brings up the question of how to utilize this feature with SQL Server VMs as SQL Server performance is very sensitive to the memory being used. In the next three posts we’ll discuss the internals of Dynamic Memory, SQL Server Memory Management and how to use Dynamic Memory with SQL Server VMs.   Memory Utilization Efficiency in Virtualized Environments   The primary reason memory is usually the bottleneck for higher VM densities is that users tend to be generous when assigning memory to their VMs. Here are some memory sizing practices we’ve heard from customers:   ·         I assign 4 GB of memory to my VMs. I don’t know if all of it is being used by the applications but no one complains. ·         I take the minimum system requirements and add 50% more. ·         I go with the recommendations provided by my software vendor.   In reality correctly sizing a virtual machine requires significant effort to monitor the memory usage of the applications. Since this is not done in most environments, VMs are usually over-provisioned in terms of memory. In other words, a SQL Server VM that is assigned 4 GB of memory may not need to use 4 GB.   How does Dynamic Memory help?   Dynamic Memory improves the memory utilization by removing the requirement to determine the memory need for an application. Hyper-V determines the memory needed by applications in the VM by evaluating the memory usage information in the guest with Dynamic Memory. VMs can start with a small amount of memory and they can be assigned more memory dynamically based on the workload of applications running inside.   Overview of Dynamic Memory Concepts   ·         Startup Memory: Startup Memory is the starting amount of memory when Dynamic Memory is enabled for a VM. Dynamic Memory will make sure that this amount of memory is always assigned to the VMs by default.   ·         Maximum Memory: Maximum Memory specifies the maximum amount of memory that a VM can grow to with Dynamic Memory. ·         Memory Demand: Memory Demand is the amount determined by Dynamic Memory as the memory needed by the applications in the VM. In Windows Server 2008 R2 SP1, this is equal to the total amount of committed memory of the VM. ·         Memory Buffer: Memory Buffer is the amount of memory assigned to the VMs in addition to their memory demand to satisfy immediate memory requirements and file cache needs.   Once Dynamic Memory is enabled for a VM, it will start with the “Startup Memory”. After the boot process Dynamic Memory will determine the “Memory Demand” of the VM. Based on this memory demand it will determine the amount of “Memory Buffer” that needs to be assigned to the VM. Dynamic Memory will assign the total of “Memory Demand” and “Memory Buffer” to the VM as long as this value is less than “Maximum Memory” and as long as physical memory is available on the host.   What happens when there is not enough physical memory available on the host?   Once there is not enough physical memory on the host to satisfy VM needs, Dynamic Memory will assign less than needed amount of memory to the VMs based on their importance. A concept known as “Memory Weight” is used to determine how much VMs should be penalized based on their needed amount of memory. “Memory Weight” is a configuration setting on the VM. It can be configured to be higher for the VMs with high performance requirements. Under high memory pressure on the host, the “Memory Weight” of the VMs are evaluated in a relative manner and the VMs with lower relative “Memory Weight” will be penalized more than the ones with higher “Memory Weight”.   Dynamic Memory Configuration   Based on these concepts “Startup Memory”, “Maximum Memory”, “Memory Buffer” and “Memory Weight” can be configured as shown below in Windows Server 2008 R2 SP1 Hyper-V Manager. Memory Demand is automatically calculated by Dynamic Memory once VMs start running.     Dynamic Memory Monitoring    In Windows Server 2008 R2 SP1, Hyper-V Manager displays the memory status of VMs in the following three columns:         ·         Assigned Memory represents the current physical memory assigned to the VM. In regular conditions this will be equal to the sum of “Memory Demand” and “Memory Buffer” assigned to the VM. When there is not enough memory on the host, this value can go below the Memory Demand determined for the VM. ·         Memory Demand displays the current “Memory Demand” determined for the VM. ·         Memory Status displays the current memory status of the VM. This column can represent three values for a VM: o   OK: In this condition the VM is assigned the total of Memory Demand and Memory Buffer it needs. o   Low: In this condition the VM is assigned all the Memory Demand and a certain percentage of the Memory Buffer it needs. o   Warning: In this condition the VM is assigned a lower memory than its Memory Demand. When VMs are running in this condition, it’s likely that they will exhibit performance problems due to internal paging happening in the VM.    So far so good! But how does it work with SQL Server?   SQL Server is aggressive in terms of memory usage for good reasons. This raises the question: How do SQL Server and Dynamic Memory work together? To understand the full story, we’ll first need to understand how SQL Server Memory Management works. This will be covered in our second post in “SQL and Dynamic Memory” series. Meanwhile if you want to dive deeper into Dynamic Memory you can check the below posts from the Windows Virtualization Team Blog:   http://blogs.technet.com/virtualization/archive/2010/03/18/dynamic-memory-coming-to-hyper-v.aspx   http://blogs.technet.com/virtualization/archive/2010/03/25/dynamic-memory-coming-to-hyper-v-part-2.aspx   http://blogs.technet.com/virtualization/archive/2010/04/07/dynamic-memory-coming-to-hyper-v-part-3.aspx   http://blogs.technet.com/b/virtualization/archive/2010/04/21/dynamic-memory-coming-to-hyper-v-part-4.aspx   http://blogs.technet.com/b/virtualization/archive/2010/05/20/dynamic-memory-coming-to-hyper-v-part-5.aspx   http://blogs.technet.com/b/virtualization/archive/2010/07/12/dynamic-memory-coming-to-hyper-v-part-6.aspx   - Serdar Sutay   Originally posted at http://blogs.msdn.com/b/sqlosteam/

  Read the article

• Send email from postfix server to outside email client

  - by Russ

  I have set up an email server and can send/receive email localhost and I can receive mail from outside sources but I cannot send emails to outside sources. I get this error when I try to send to an outside source such as live.com or gmail.com: Nov 8 22:15:13 server2 postfix/smtp[7598]: 699D480A64: to=, relay=none, delay=122043, delays=122022/0.01/20/0, dsn=4.4.3, status=deferred (Host or domain name not found. Name service error for name=live.com type=MX: Host not found, try again) Any ideas where I could look to resolve this?

  Read the article

• Learn About Oracle’s Strategy for a Simple, Modern User Experience at OpenWorld 2012

  - by Applications User Experience

  By Kathy Miedema, Oracle Applications User Experience If you’re interested in what the best possible user experience looks like, you’ll want to hear what Oracle’s Applications User Experience team is planning for OpenWorld 2012, Sept. 30-Oct. 4 in San Francisco. This year, we will talk Fusion, Fusion, Fusion. We were among the first to show Oracle Fusion Applications in the last couple of years, and we’ll be showing it again this year so you can see what Oracle is planning for the next generation of enterprise applications. Attend our sessions to learn more about the user experience strategy in which Oracle is investing. Simplicity is the driving force behind the demos that we are unveiling now, which you can see at OpenWorld. We want to create opportunities for productivity and efficiency, and deliver enterprise data across devices to help you do your work in the way best suited to your job and needs, said Jeremy Ashley, Vice President, Oracle Applications User Experience. You can see the new look for Fusion Applications at a general session led by Ashley at 3:30 p.m. on Wednesday, Oct. 3. You’ll also have the chance to learn more about tailoring in Oracle Fusion Applications, and gain a new understanding of the investment in the user experience behind Fusion Applications at our sessions (see session information below). Inside the Oracle Applications User Experience team’s on-site lab at Oracle OpenWorld 2011. Head to the demogrounds to see new demos from the Applications User Experience team, including the new look for Fusion Applications and what we’re building for mobile platforms. Take a spin on our eye tracker, a very cool tool that we use to research the usability of a particular design. Visit the Usable Apps OpenWorld page to find out where our demopods will be located. We are also recruiting participants for our on-site lab, in which we gather feedback on new user experience designs, and taking reservations for a charter bus that will bring you to Oracle headquarters for a lab tour Thursday, Oct. 4, or Friday, Oct. 5. Tours leave at 10 a.m. and 1:45 p.m. from the Moscone Center in San Francisco. You’ll see more of our newest designs at the lab tour, and some of our research tools in action. Can’t participate in a customer feedback session or take a lab tour this time around? Visit Usable Apps to participate or book a tour another time. For more information on any OpenWorld sessions, check the content catalog – also available at www.oracle.com/openworld. For information on Applications User Experience (Apps UX) sessions and activities, go to the Usable Apps OpenWorld page. APPS UX OPENWORLD SESSIONS Oracle’s Roadmap to a Simple, Modern User Experience Presenter: Jeremy Ashley, Vice President Applications User Experience, Oracle; with Debra Lilley, Fujitsu Consulting; Basheer Khan, Innowave; and Edward Roske, InterRelSession ID: CON9467Date: Wednesday, Oct. 3 Time: 3:30 - 4:30 p.m.Location: Moscone West - 3002/3004 Jeremy Ashley Oracle Fusion Applications: Transforming Insight into Action Presenters: Killian Evers and Kristin Desmond, OracleSession ID: CON8718Date: Thursday, Oct. 4Time: 11:15 a.m. - 12:15 p.m.Location: Moscone West - 2008 “FRIENDS OF UX” OPENWORLD SESSIONS Sessions by the Oracle Usability Advisory Board (OUAB) members: Advances in Oracle Enterprise Governance, Risk, and Compliance Manager  Presenters: Koen Delaure, KPMG Advisory NV, and Oracle Usability Advisory Board member; Russell Stohr, Oracle Session ID: CON9389Date: Tuesday, Oct. 2Time: 1:15 - 2:15 p.m.Location: Palace Hotel - Concert Optimize Oracle E-Busines Suite Procure-to-Pay: Cut Inefficiences/Fraud with Oracle GRC Apps Presenters: Koen Delaure, KPMG Advisory NV, and Solveig Wagner, Seadrill Management AS, both Oracle Usability Advisory Board members; and Swarnali Bag, OracleSession ID: CON9401Date: Monday, Oct. 1Time: 12:15 - 1:15 p.m.Location: Intercontinental - Sutter Showcase of JD Edwards EnterpriseOne Mobility Presenters: Jon Wells, Westmoreland Coal Co., Oracle Usability Advisory Board member; Rob Mills and Liz Davson, Town of Oakville; Keith Sholes and Louise Farner, Oracle Session ID: CON9123Date: Tuesday, Oct. 2Time: 1:15 - 2:15 p.m.Location: InterContinental - Grand Ballroom B Sessions by the Fusion User Experience Adovcates (FXA) Usability and Features of Oracle Fusion Applications, Built upon Oracle Fusion Middleware Presenters: Debra Lilley, Fujitsu Consulting and Oracle Usability Advisory Board member; John King, King Training ResourcesSession ID: UGF10371Date: Sunday, Sept. 30Time: 11 a.m. - 11:45 a.m. Location: Moscone West – 2010 Ten Things to Love About Oracle Fusion Project Portfolio Management  Presenter: Floyd Teter, EiS TechnologiesSession ID: CON6021Date: Tuesday, Oct. 2Time: 10:15 - 11:15 a.m.Location: Moscone West – 2003

  Read the article

• Resources to learn XNA for a professional c# developer

  - by Team-JoKi

  I'm a .net consultant (mainly c#) for my job, but for a while now, I've been interested in making a game in XNA (as a hobby project). I've had a "beginner" course in XNA when I was still a student, but I've lost most of the information (plus, it was VERY beginner, not enough to get you really started). So my question, which resources would be useful for me to learn XNA (books, blogs, websites, tutorials, resource websites - like textures, audio files, etc..)? I know this is a very open question, but I'm thankful for any information.

  Read the article

• 3 Day Level 400 SQL Tuning Workshop 15 March in London, early bird and referral offer

  - by sqlworkshops

  I want to inform you that we have organized the "3 Day Level 400 Microsoft SQL Server 2008 and SQL Server 2005 Performance Monitoring & Tuning Hands-on Workshop" in London, United Kingdom during March 15-17, 2011.This is a truly level 400 hands-on workshop and you can find the Agenda, Prerequisite, Goal of the Workshop and Registration information at www.sqlworkshops.com/ruk. Charges are GBP 1800 (VAT excl.). Early bird discount of GBP 125 until 18 February. We are also introducing a new referral plan. If you refer someone who participates in the workshop you will receive an Amazon gift voucher for GBP 125.Feedback from one of the participants who attended our November London workshop:Andrew, Senior SQL Server DBA from UBS, UK, www.ubs.com, November 26, 2010:Rating: In a scale of 1 to 5 please rate each item below (1=Poor & 5=Excellent) Overall I was satisfied with the workshop 5 Instructor maintained the focus of the course 5 Mix of theory and practice was appropriate 5 Instructor answered the questions asked 5 The training facility met the requirement 5 How confident are you with SQL Server 2008 performance tuning 5 Additional comments from Andrew: The course was expertly delivered and backed up with practical examples. At the end of the course I felt my knowledge of SQL Server had been greatly enhanced and was eager to share with my colleagues. I felt there was one prerequisite missing from the course description, an open mind since the course changed some of my core product beliefs. For Additional workshop feedbacks refer to: www.sqlworkshops.com/feedbacks.I will be delivering the Level 300-400 1 Day Microsoft SQL Server 2008 Performance Monitoring and Tuning Seminar at Istanbul and Ankara, Turkey during March. This event is organized by Microsoft Turkey, let me know if you are in Turkey and would like to attend.During September 2010 I delivered this Level 300-400 1 Day Microsoft SQL Server 2008 Performance Monitoring and Tuning Seminar in Zurich, Switzerland organized by Microsoft Switzerland and the feedback was 4.85 out of 5, there were about 100 participants. During November 2010 when I delivered seminar in Lisbon, Portugal organized by Microsoft Portugal, the feedback was 8.30 out of 9, there were 130 participants.Our Mission: Empower customers to fully realize the Performance potential of Microsoft SQL Server without increasing the total cost of ownership (TCO) and achieve high customer satisfaction in every consulting engagement and workshop delivery.Our Business Plan: Provide useful content in webcasts, articles and seminars to get visibility for consulting engagements and workshop delivery opportunity. Help us by forwarding this email to your SQL Server friends and colleagues.Looking forwardR Meyyappan & Team @ www.SQLWorkshops.comLinkedIn: http://at.linkedin.com/in/rmeyyappan

  Read the article

• Moesion Webinar: Managing BizTalk Server from your Smartphone or Tablet Without Upsetting your Boss

  - by gsusx

  BizTalkers, This Thursday we will be hosting a webinar to highlight how to use Moesion to manage your BizTalk Server environment from your mobile device. We will walk through the complete feature set of Moesion HTML5 BizTalk management console as well as complementary features of the Moesion platform that can be used to manage your BizTalk environment from your mobile device. More importantly, if you are a BizTalk developer or IT Pro we REALLY REALLY REALLY would love to get your feedback about the...(read more)

  Read the article

• Oracle-AmberPoint Webcast: Learn How Your Business Can Profit from the Combination

  - by jyothi.swaroop

  With the recent acquisition of AmberPoint, Oracle now offers an enhanced end-to-end SOA solution that features runtime governance, business transaction management, and cross-platform management capabilities. Put that solution to work and your business can achieve lower costs of implementation and higher profit. Join Ed Horst, Vice President, Oracle (former CMO of AmberPoint), and Ashish Mohindroo, Senior Director, Product Marketing, Oracle, as they discuss in this live Webcast the customer advantages of the Oracle and AmberPoint combination. Learn how our SOA solutions with AmberPoint capabilities can help you: Achieve more agility and visibility into your business processes Increase control and performance of critical applications Improve performance and reduce IT costs to benefit your bottom line Register for the Live Webcast Event Date: Thursday, May 20, 2010 Time: 10 a.m. PT/1 p.m. ET

  Read the article

• Why Ubuntu Server asks to insert a CD-ROM when installed from PXE?

  - by MainMa

  I set up a PXE server which hosts both Ubuntu Desktop and Ubuntu Server. Ubuntu Desktop is installed successfully from PXE. Ubuntu Server seems to successfully load vmlinuz and initrd.gz, asks for the language, then the location, then the keyboard layout, and finally complains that it can't mount the CD-ROM: The content of /var/lib/tftpboot/pxelinux.cfg/default is the following: default ubuntu-installer/amd64/boot-screens/vesamenu.c32 menu title Ubuntu setup label ubuntu-14.04-desktop-amd64 menu label ubuntu-14.04-desktop-amd64 kernel ubuntu-14.04-desktop-amd64/vmlinuz.efi append initrd=ubuntu-14.04-desktop-amd64/initrd.lz root=/dev/nfs boot=casper netboot=nfs nfsroot=192.168.1.41:/exports/ubuntu-14.04-desktop-amd64 splash -- label ubuntu-14.04-server-amd64 menu label ubuntu-14.04-server-amd64 kernel ubuntu-14.04-server-amd64/vmlinuz append initrd=ubuntu-14.04-server-amd64/initrd.gz root=/dev/nfs boot=install netboot=nfs nfsroot=192.168.1.41:/exports/ubuntu-14.04-server-amd64 splash -- What explains the fact that it requests the CD-ROM and how to avoid it?

  Read the article

• Speaking at SQLRelay. Will you be there?

  - by jamiet

  SQL Relay (#sqlrelay) is fast approaching and I wanted to take this opportunity to tell you a little about it.SQL Relay is a 5-day tour around the UK that is taking in five Server Server user groups, each one comprising a full day of SQL Server related learnings. The dates and venues are:21st May, Edinburgh22nd May, Manchester23rd May, Birmingham24th May, Bristol30th May, LondonClick on the appropriate link to see the full agenda and to book your spot.SQL Relay features some of this country's most prominent SQL Server speakers including Chris Webb, Tony Rogerson, Andrew Fryer, Martin Bell, Allan Mitchell, Steve Shaw, Gordon Meyer, Satya Jayanty, Chris Testa O'Neill, Duncan Sutcliffe, Rob Carrol, me and SQL Server UK Product Manager Morris Novello so I really encourage you to go - you have my word it'll be an informative and, more importantly, enjoyable day out from your regular 9-to-5.I am presenting my session "A Lap Around the SSIS Catalog" at Edinburgh and Manchester so if you're going, I hope to see you there.@Jamiet

  Read the article

• Tellago Devlabs: A RESTful API for BizTalk Server Business Rules

  - by gsusx

  Tellago DevLabs keeps growing as the primary example of our commitment to open source! Today, we are very happy to announce the availability of the BizTalk Business Rules Data Service API which extends our existing BizTalk Data Services solution with an OData API for the BizTalk Server Business Rules engine. Tellago’s Vishal Mody led the implementation of this version of the API with some input from other members of our technical staff. The motivation The fundamental motivation behind the BRE Data...(read more)

  Read the article

• Amanda Todd&ndash;What Parents Can Learn From Her Story

  - by D'Arcy Lussier

  Amanda Todd was a bullied teenager who committed suicide this week. Her story has become headline news due in part to her You Tube video she posted telling her story:   The story is heartbreaking for so many reasons, but I wanted to talk about what we as parents can learn from this. Being the dad to two girls, one that’s 10, I’m very aware of the dangers that the internet holds. When I saw her story, one thing jumped out at me – unmonitored internet access at an early age. My daughter (then 9) came home from a friends place once and asked if she could be in a YouTube video with her friend. Apparently this friend was allowed to do whatever she wanted on the internet, including posting goofy videos. This set off warning bells and we ensured our daughter realized the dangers and that she was not to ever post videos of herself. In looking at Amanda’s story, the access to unmonitored internet time along with just being a young girl and being flattered by an online predator were the key events that ultimately led to her suicide. Yes, the reaction of her classmates and “friends” was horrible as well, I’m not diluting that. But our youth don’t fully understand yet that what they do on the internet today will follow them potentially forever. And the people they meet online aren’t necessarily who they claim to be. So what can we as parents learn from Amanda’s story? Parents Shouldn’t Feel Bad About Being Internet Police Our job as parents is in part to protect our kids and keep them safe, even if they don’t like our measures. This includes monitoring, supervising, and restricting their internet activities. In our house we have a family computer in the living room that the kids can watch videos and surf the web. It’s in plain view of everyone, so you can’t hide what you’re looking at. If our daughter goes to a friend’s place, we ask about what they did and what they played. If the computer comes up, we ask about what they did on it. Luckily our daughter is very up front and honest in telling us things, so we have very open discussions. Parents Need to Be Honest About the Dangers of the Internet I’m sure every generation says that “kids grow up so fast these days”, but in our case the internet really does push our kids to be exposed to things they otherwise wouldn’t experience. One wrong word in a Google search, a click of a link in a spam email, or just general curiosity can expose a child to things they aren’t ready for or should never be exposed to (and I’m not just talking about adult material – have you seen some of the graphic pictures from war zones posted on news sites recently?). Our stance as parents has been to be open about discussing the dangers with our kids before they encounter any content – be proactive instead of reactionary. Part of this is alerting them to the monsters that lurk on the internet as well. As kids explore the world wide web, they’re eventually going to encounter some chat room or some Facebook friend invite or other personal connection with someone. More than ever kids need to be educated on the dangers of engaging with people online and sharing personal information. You can think of it as an evolved discussion that our parents had with us about using the phone: “Don’t say ‘I’m home alone’, don’t say when mom or dad get home, don’t tell them any information, etc.” Parents Need to Talk Self Worth at Home Katie makes the point better than I ever could (one bad word towards the end): Our children need to understand their value beyond what the latest issue of TigerBeat says, or the media who continues flaunting physical attributes over intelligence and character, or a society that puts focus on status and wealth. They also have to realize that just because someone pays you a compliment, that doesn’t mean you should ignore personal boundaries and limits. What does this have to do with the internet? Well, in days past if you wanted to be social you had to go out somewhere. Now you can video chat with any number of people from the comfort of wherever your laptop happens to be – and not just text but full HD video with sound! While innocent children head online in the hopes of meeting cool people, predators with bad intentions are heading online too. As much as we try to monitor their online activity and be honest about the dangers of the internet, the human side of our kids isn’t something we can control. But we can try to influence them to see themselves as not needing to search out the acceptance of complete strangers online. Way easier said than done, but ensuring self-worth is something discussed, encouraged, and celebrated is a step in the right direction. Parental Wake Up Call This post is not a critique of Amanda’s parents. The reality is that cyber bullying/abuse is happening every day, and there are millions of parents that have no clue its happening to their children. Amanda’s story is a wake up call that our children’s online activities may be putting them in danger. My heart goes out to the parents of this girl. As a father of daughters, I can’t imagine what I would do if I found my daughter having to hide in a ditch to avoid a mob or call 911 to report my daughter had attempted suicide by drinking bleach or deal with a child turning to drugs/alcohol/cutting to cope. It would be horrendous if we as parents didn’t re-evaluate our family internet policies in light of this event. And in the end, Amanda’s video was meant to bring attention to her plight and encourage others going through the same thing. We may not be kids, but we can still honour her memory by helping safeguard our children.

  Read the article

• debootstrap or virt-install Ubuntu Server Maverick fails

  - by poelinca

  Oki so running any kind of variation of debootsrap i get the following error I: Extracting zlib1g... W: Failure trying to run: chroot /lxc/iso/dodo mount -t proc proc /proc debootstrap.log : mount: permission denied if i manualy chroot into the directory then i get promted with: id: cannot find name for group ID 0 I have no name!@...# i tryed addgroup but it's not installed , apt-get/aptitude : command not found , so i can't do anything with it . I've tryed ubuntu-vm-builder but since it's calling debootstrap i get the same error . Played with it for a few days and then i stoped and gaved virt-install a try , everithing works till i get to the console to finish the install witch shows only : Escape character is ^] and nothing more , no matter what i type . So basicly what i'm trying to do is build a usable chroot system so i can use it with lxc or libvirt . What are my options to get containers/virtualisation up and running ? I've read somewhere that i can use openvz templates with lxc or libvirt ? but how ? Let me know if you need aditional info ( p.s. doing all this on a dedicated server so i can't access it by hand , only ssh , plus on my local pc running ubuntu desktop maverick everithing works ) . EDIT Getting closer , i managed to understand how to use an openvz template with lxc , now the problem comes with the network bridge lxc-start: invalid interface name: br0 # Use same bridge device used in your controlling host setup lxc-start: failed to process 'lxc.network.link = br0 # Use same bridge device used in your controlling host setup ' lxc-start: failed to read configuration file i followed the exact steps to create a bridge and lxc conf looks like: lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 # Use same bridge device used in your controlling host setup lxc.network.hwaddr = {a1:b2:c3:d4:e5:f6} # As appropiate (line only needed if you wish to dhcp later) lxc.network.ipv4 = {10.0.0.100} # (Use 0.0.0.0 if you wish to dhcp later) lxc.network.name = eth0 # could likely be whatever you want Since it's not working i know smth is wrong so could somebody guyde me ? EDIT , looks like the base install was using an custom kernel ( bzImage-2.6.34.6-xxxx-grs-ipv6-65 ) for witch you i didn't found the headers , i did a update-grub after i installed a new kernel , edited menu.lst and no it's using 2.6.35-23-server and now debootstrap is working just fine same as ubuntu-vm-builder .

  Read the article

< Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >