Search Results

Search found 7940 results on 318 pages for 'intel wireless'.

Page 233/318 | < Previous Page | 229 230 231 232 233 234 235 236 237 238 239 240  | Next Page >

• Disable Memory Modules In BIOS for Testing Purposes (Optimize Nehalem/Gulftown Memory Performance)

  - by Bob

  I recently acquired an HP Z800 with two Intel Xeon X5650 (Gulftown) 6 core processors. The person that configured the system chose 16GB (8 x 2GB DDR3-1333). I'm assuming this person was unaware these processors have 3 memory channels and to optimize memory performance one should choose memory in multiples of three. Based on this information, I have a question: By entering the BIOS, can I disable the bank on each processor that has the single memory module? If so, will this have any adverse effects or behave differently than physically removing the modules? I ask due to the fact that I prefer to store the extra memory in the system if it truly behaves as if the memory is not even there. Also, I see this as an opportunity to test 12GB vs. 16GB to see if there is a noticeable difference. Note: According to http://www.delltechcenter.com/page/04-08-2009+-+Nehalem+and+Memory+Configurations?t=anon, the current configuration reduces the overall data transfer speed to 1066 and in addition, the memory bandwidth goes down by about 23%.

  Read the article

• Options for gaming remotely on a LAN?

  - by Schwern

  I have a Windows 7 desktop for gaming, a big bulky tower with a nice graphics card. I'd like to sit out on my porch rather than inside while the weather is nice and play games. I have a high end Macbook Pro. What are my options? I figure either remote desktop over the LAN on the Macbook or maybe wireless video, keyboard and mouse. Something so I don't have to physically move the PC. The sort of games range from things like Skyrim to SW:TOR to Torchlight 2. What are my options? They have to do a better than running Boot Camp on the Macbook (MacBookPro8,1 i7 2.7 Ghz but Intel Graphics 3000). I realize there's a lot of issues involved in running a game over a remote desktop with a decent frame rate, I'm interested in a practical answer with real experience behind them. Ideally something that works on a OS X so I don't have to reboot into Windows.

  Read the article

• Is 850W SMPS enough for the below Config?

  - by bali208

  We are planing to assemble a file server of the following configuration. 1) Intel S2400SC2 Motherboard. 2) Xeon 2407 Processor x 2 (Dual Processors) 3) 8gb x 8 ECC DDR3 RAM 4) One 2 TB Seagate HDD. 5) 8 cabinet fans fitted for NZXT Switch 810 Cabinet. Our question is is CoolerMaster 850 Watts power supply enough for our machine? Or we have to put 1050 Watts power Supply? Please suggest the best Brand and Wattage of SMPS we have to buy for our system. Thank you.

  Read the article

• HDD vanished after wakeup from standby

  - by Sam

  In my computer I got two hard drives: One 80GB Intel X25 Postville SSD for the system and a 1,5TB Sata HDD for data. When I put the system into standby, and wake it up again, roundabout 50% of the time the 1,5TB HDD is not found. It just vanished from the system (wreaking havok to all programs running which had open files on it). Even going into the system management and refreshing the drives does not find the lost HDD. There are no messages about this in the event log. After a warm reboot the hdd is found again, just like it should. The system is a Shuttle SP35P2 Pro with 8GB Ram and DualCore CPU, OS is Windows 7 Ultimate. I even set up the OS anew, didn't help. Any ideas what might cause this? How to debug, or maybe even fix it?

  Read the article

• Cannot find my hard disk while installing linux-“No root file system defined” error

  - by Syam Kumar S

  I am trying install Linux on my computer (tried Ubuntu 10.4 and Linux Mint 9). I started the installation wizard and on the hard disk selection page the hard disk is not displayed. I have a 500GB disk with 5 partitions and windows 7 ultimate in one partition. If I click the forward button, it shows an error- "No root file system defined". I have tried to install by booting from CD and pendrive but both shows the same error. When I load Linux as live CD it doesn't show the hard disk. My hard disk works fine in windows 7. System config: intel i3 2100, 500GB hdd, 2GB ram

  Read the article

• Using Zebra LP 2844-Z over the network

  - by Jason Kealey

  Hello, I am looking for a network-based label printer. I am looking at this Zebra LP-2844-Z printer. Unfortunately, it does not come with a network interface like the lower-end LP 2824 Plus. The ZebraNet 10/100 Print Server is both expensive for what it does (~$600) and only seems to support wireless networking, not wired. I prefer wired for reliability. Questions: Can I use a cheaper off-the-shelf print server to turn the LP-2844Z to a network printer. Would I get any trouble communicating with the printer via its own programming language or via OPOS? (instead of the Windows driver) Are cheaper print servers reliable? Would I be better to get another printer model that has it built in directly to avoid having issues due to the print server? What other printer would you recommend?

  Read the article

• HP OfficeJet 5600 w/ Dlink DPR1260 not printing except from Notepad

  - by joelarson

  I have an OfficeJet5600 attached to a Dlink DPR1260 wireless print router. It has worked great for a long time. Today we had a power outage and the thing was inaccessible. I reset the DPR1260 and reinstalled drivers and soforth. I can now print from Notepad, but not from any Office programs, IE, or Chrome. I have toggled on and off many settings such as spooling/not spooling, etc. Nothing has helped. Any ideas? I have Windows Vista.

  Read the article

• Recovering drivers from previous installation?

  - by Walkerneo

  Yesterday I bought a new computer and I've been setting it up since this morning. The hard drive came with windows 7 home premium (x64) installed, but I decided to instead install windows 7 ultimate (x64) - this is what I'm currently using. Unfortunately, there were some drivers that were installed that I need in this installation. I only notice because the computer doesn't have the ethernet drivers, so I'm only able to connect to the internet via wireless. There are other drivers missing as well, but I'm not yet seeing the effects. I still have the Windows.old folder with the previous installation, which has the drivers. Is there any way to copy the necessary ones over? I tried the options for updating driver software through device manager with the path set to System32\drivers of the old installation, but it didn't find anything.

  Read the article

• Force the computer to always use current display settings

  - by sazpaz

  So I'm having a terrible black screen problem with my new installation of Windows 8. The screen basically goes to black every time I turn it on or sleep, or connect to an external or monitor. I dont really know what steps actually cause the problem and cant seem to figure what steps allow the screen to come back, besides forcing restarts, going to sleep and waking up, and smashing Win + P. I have a strong feeling it's because the Switchable graphics I have (Intel HD + Radeon 5060), so I'm looking for a way to make the computer always use a specified mode (i.e the current mode I'm on, that does show stuff on the screen) and force it to use it everytime? Any ideas? EDIT: I've Installed all the latest drivers I've found. Tried most of the solutions around the web for this problem. Updated the BIOS to UEFI (from HP Support Assistant), etc. Laptop is an HP- Envy 14

  Read the article

• How to compare speed of graphics cards in Windows desktop environment?

  - by Al Kepp

  I use Windows 7 and Intel Core i3 CPU with integrated graphics. My problem is that it eats valuable system RAM for display. I can replace it with an old PCIe Radeon X700, so all system RAM will be usable for applications. The question is if an old Radeon X700 is comparable in W7 desktop speed to a new integrated i3 graphics. Are there any test programs which compare the speed of graphic cards in Windows 7 desktop environment (i.e. no Direct3D games, just Windows desktop)? (According to Tomshardware, Radeon X700 is probably even faster than Core i3 in 3D. But there are no native WDDM 1.1 W7 drivers for X700, only WDDM 1.0 Vista drivers are available.)

  Read the article

• PSU Suggestions for SLI EVGA GTX 680 + i7

  - by JMH

  So i am putting together a new machine and am trying to determine the best PSU to go with for this setup. Here is the build i am thinking about Processor Intel Core i7-3770K Ivy Bridge 3.5GHz Motherboard ASRock Z77 Professional Graphics Card (2 SLI) EVGA 02G-P4-2680-KR Sound Card HT | OMEGA eClaro 7.1 Fan/Heat Sync ZALMAN CNPS9500A-LED Case COOLER MASTER HAF X RC-942-KKN1 RAM G.SKILL Ripjaws X Series 32GB (4 x 8GB) SSD Of some Sort So my guess is that i need a 750 -1000W PSU, but which brand.... how much, etc --- really in the woods. Thanks -Josh

  Read the article

• Best way to backup and restore millions of files

  - by bongo

  Hi, I'm facing a rebuilding of the volume on which I host the mail storage (kerio mailserver, which uses maildirs). I need to backup and restore as quick as possible the 3.5+ millions (for about 600GB) small files of the store directory. It takes more than 12 hours via rsync to a NFS share, but I also have a 1TB firewire 800 raid1 disk that I can use (from some preliminary tests it's faster). I'm working off a XServe intel. What is the fastest way to do it? Rsync? Finder copy? tar?

  Read the article

• iptables forwarding between two interface

  - by broody

  So I have a linux box with two wireless interfaces, one is a station and the other an AP. wlan0 (station) - Connected to the internet connection wlan1 (AP) - Other clients connect to it. I would like for clients connected to wlan1 to be able to access the internet on wlan0. And I'd like to do this with iptables as my kernel doesn't have bridging support... Here's what I've tried so far with iptables but it's not working: iptables -A FORWARD -i wlan0 -o wlan1 -j ACCEPT iptables -A FORWARD -i wlan1 -o wlan0 -j ACCEPT I'd appreciate any help.

  Read the article

• Windows 7 Connection Sharing unable to access some sites

  - by Kristopher Ives

  I have a pretty sad networking situation that involves connecting to an open Wireless network and sharing that connection to an Ethernet that is plugged into a Linksys router. This has been done with XP and Windows 7, and it works great with XP. The problem with Windows 7 is that only some DNS will work. I don't know if it's been poisoned on the network above us (which we have no control over), but we've tried clearing the DNS cache as well as moving to using Google's DNS servers (8.8.8.8, 8.8.4.4). Here is a really quick list of sites that won't respond to DNS requests at all via dig, although if I get the IP address I can ping them: facebook.com yuilibrary.com twitter.com A lot of sites do work though. Anyone have an idea? It may be a subnet problem? If anyone wants more info let me know.

  Read the article

• Anyone know of a good way to sell used servers?

  - by RandyMorris

  We have a couple of servers we no longer need now that we are fully hosted on a managed host (rackspace). They were purchased for over $10,000 each but we realize that over time their monetary value drops. Anyone have suggestions or experience selling these in a proper way? They are dual xeon processor 2U rack mountable with 4+GB RAM, intel boards, 6x 72GB 15,000 RPM SCSI Drives with raid controller redundant power supply. We are in Southern California area. I can be more specific on any information if there is interest. I know there is ebay and the like but these servers are like the family dog that has to be given up and we are looking for a proper home for a fair price. I will end up auctioning it off if need be in the end though. Thanks in advanced for any help!

  Read the article

• ibm 8305-29u Sound comes from internal speaker instead of green port - Ubuntu 10.04 LTS

  - by TecBrat

  The title pretty much says it all. My experience w/ubuntu is VERY limited. I did find the system test feature and ran an audio test. It found my device as Intel 82801DB-ICH4. I wasn't getting anything. I tried a couple of things and don't really even remember what I tried, but I started getting audio (not just beeps) from the system's internal speaker. Any ideas? (I can't rule out a hardware problem. This box sat under my bed for a couple of years and it's first life was in an environment FULL of cement dust.)H

  Read the article

• Samsung 830 very slow benchmark numbers

  - by alekop

  I just bought a new SSD, and installed a fresh copy of Windows on it. I didn't see any noticeable difference in boot times, app start-up times, so I decided to benchmark it. Asus P7P55D-E Intel i5-760 Samsung 830 256GB SATA III Windows 7 Ultimate 64-bit The Windows experience index gave the drive a 7.3 rating, but real-world performance is not particularly impressive. Any ideas why the numbers are so low? UPDATE: It turns out that SATA III support is turned off by default on the P7P55D motherboard. After enabling it in BIOS (Tools - Level Up), the scores went up: Read Write Seq 325 183 4K 16 49 IOPS 32K 28K It's an improvement, but still far below what they should be for this drive.

  Read the article

• GIMP Slow Startup

  - by muntoo

  Is there any way to speed up GIMP's startup time on Windows Vista Home Premium 32-Bit 1.6 [Dual] Intel Processors? On XP [different computer], it loads in less than 3 seconds. On Vista, it takes 20 seconds: 2 Seconds (other - fonts, brushes, etc) 18 Seconds (extension-script-fu) It just freezes at extension-script-fu. Looking at ProcessExplorer (or Task Manager, whatever), I see that it's not taking any CPU. EDIT: it does seem to be taking 50% of the CPU. It gets stuck for about 18 seconds, then starts working again, and the actual GIMP program pops up [...finally]. I have the latest stable version running (I think). I tried it with XP SP2 Compatibiliy mode and/or Run As Administrator, but that didn't help. EDIT: One way would be to disable script-fu. Does anyone know how to disable it at startup? (NOTE: Just wanted to point out that the title and the tags are the same. :D )

  Read the article

• Domain connection shows as "unauthenticated"

  - by gareth89

  I have seen various different questions for this problem floating around but either the circumstances arent the same or the solution doesnt work so thought i would post it to see if anybody has any suggestions. Various domain PCs and laptops appear to randomly give the connection name of "lewis.local 2(Unauthenticated)" - lewis.local being our domain - and provides an exclamation mark where the network type logo is normally shown. This also appears to happen every time connecting via vpn. Our setup is: 2 servers both running windows server 2003 R2 (x32) main server has AD, DNS and DHCP installed IPv4 on approx 30 client machines (some wired, some wireless) If anybody has any thoughts on solutions i would appreciate it. I have tried removing all but AD server roles, resetting all of the systems and nothing. It doesnt prevent anything from working just like a domain connection most of the time however it is getting fustrating! Also dont know if it could have anything to do with it but the DHCP server seems to have quite a long lead time on issuing the IP address to the client.

  Read the article

• Turnkeylinux lampp guest doesn't have internet connection

  - by dave08

  I've set up a turnkeylinux lampp server in virtualbox with two network bridged connections, one for when I'm plugged in to my router, and one for when I'm using a wireless connection. This allowed me to pull up the turnkey control panel on the host machine's browser, but when I try going into the command prompt in the guest and run an apt-get update, it doesn't seem to have an internet connection, even though it seems to have a connection with the host. What could be wrong? Thank you very much in advance for any answers...!

  Read the article

• Boot Vista x64 with both ICH8 and ICH10 AHCI support

  - by adurity

  I have a situation where I need to boot Windows Vista 64-bit from both a ICH10 and ICH8 AHCI SATA controller. Currently, it is setup to boot from the ICH10, but when I try booting with the ICH8, I get the famed Windows STOP 7B BSOD. How can I add the ICH8 driver so that I can work around this BSOD and boot the system? I have updated to the latest Intel AHCI driver (8.9.0.1023 as of this post) which is supposed to support both chipsets, but I feel I am missing something.

  Read the article

• Extend my LAN network

  - by user268291

  i have a patch panel and hardwiring already setup in my office. The patch panel is 24-port and all the ports are engaged. All my switch ports are engaged. Now, I have a printer connected to a wall point (RJ45) which I want to shift to a new room where there is no LAN setup. I want to have two RJ45 wall plugs in the new room so that I can connect one RJ45 port to have my LAN in the new room and the other RJ45 wall port I want to use for my printer. There is no option other than LAN (no wireless). Please help me and tell me how do I get the two RJ45 wall plate plugs in the new room up and keep my LAN running. It is a little urgent for me. Please help.

  Read the article

• ICS as guest in Ubuntu 12.04 host

  - by oshirowanen

  I have installed Android as per this guide as a guess os via VirtualBox: http://www.android-x86.org/documents/virtualboxhowto Using the following ISO: android-x86-4.0-RC1-eeepc.iso But I am unable to connect to the internet from within the android virtual machine. The host OS is Ubuntu 12.04 where the internet works fine. I have internet access via a usb wireless connection to the home router. All this is fine. If I install Ubuntu 12.04 as a guest, where the host is also Ubuntu 12.04. The guest os'es internet works fine out of the box. But for some reason, I can't get the above androids internet to work out of the box as the guest os. Anyone know what I am doing wrong?

  Read the article

• Mecer laptop gives me a white screen when I close the screen

  - by Dane Rossenrode

  I'm having a very strange hardware issue with my Mecer m770u laptop with intel i7 quad core, etc... I'm wondering if anyone has had this issue with any other brand/model of laptop, and what I should fix/replace to solve it...? Basically when I close the screen of the laptop, the screen often goes completely white. If I open it slowly and smoothly again, the screen returns to normal. But if I close the screen when the computer is off, and then switch it on, it boots with a white screen, and opening it slowly/smoothly doesn't help. I have to then switch it on and off a few times before it returns to normal. Makes travelling with my laptop really difficult! Any suggestions?

  Read the article

• How to add higher video resolution in Ubuntu 10.04 (UNR on EEE1101HA)

  - by lexu

  I picked up an ASUS EEE 1101HA with Windows 7 and installed UBUNTU 10.04 Netbook Remix (dual boot). Ubuntu runs fine, but it doesn't recognize that the notebook LCD is 1388x768 and thus only offers 1024x768 and 800x600 as monitor resolution. So .. how can I tell it about that higher resolution? (Have root pwd & vi, una-bash-ed to use both.. ) UPDATE there is currently (early May 2010) no video-driver for the Intel GMA500 "Poulsbo" => no solution exists for now.

  Read the article

< Previous Page | 229 230 231 232 233 234 235 236 237 238 239 240  | Next Page >