Search Results

Search found 8913 results on 357 pages for 'core i5'.

Page 234/357 | < Previous Page | 230 231 232 233 234 235 236 237 238 239 240 241  | Next Page >

• Ubuntu 12.04 desktop, VNC viewer not refreshing screen

  - by user73279

  I've had this issues across multiple machines and multiple versions of Ubuntu desktop (all 10.04 or later). Usually it happens with an old laptop I've put Ubuntu on but now it's happening on my primary dev machine (a quad-core PC recently upgraded to Ubuntu 12.04 desktop). The problem is this - I can connect to the machine and login with the password, the initial screen looks fine but never refreshes. I can see the monitor for the machine across the room and can see the mouse move and the menus pop up but the image of the screen on the PC in front me running the VNC viewer never updates. So the mouse and keyboard commands are working. Ubuntu 12.04 Desktop Ultra VNC Viewer (also seen with RealVNC's free VNC viewer) Desktop Sharing Static IP on eth0; Dynamic ID on eth1 I think it is an Ubuntu config issue because this PC used to work just fine with 9.04, 10.04, and 11.10 (over the past couple of years). I've also had a couple of laptops that used to have this issue with older Ubuntu's but don't with 12.04. Additional info: The Win7 PC I'm trying to use to control the Ubuntu PC is connected via 2 DLink 8-port gigabit routers. The Ubuntu laptop I usually control via VNC is typically only connected to the network via wireless. The screen refresh is choppy but usable. I've repeated the issue on a Win7 laptop which was connected via ethernet and wireless.

  Read the article

• How to represent a graph with multiple edges allowed between nodes and edges that can selectively disappear

  - by Pops

  I'm trying to figure out what sort of data structure to use for modeling some hypothetical, idealized network usage. In my scenario, a number of users who are hostile to each other are all trying to form networks of computers where all potential connections are known. The computers that one user needs to connect may not be the same as the ones another user needs to connect, though; user 1 might need to connect computers A, B and D while user 2 might need to connect computers B, C and E. Image generated with the help of NCTM Graph Creator I think the core of this is going to be an undirected cyclic graph, with nodes representing computers and edges representing Ethernet cables. However, due to the nature of the scenario, there are a few uncommon features that rule out adjacency lists and adjacency matrices (at least, without non-trivial modifications): edges can become restricted-use; that is, if one user acquires a given network connection, no other user may use that connection in the example, the green user cannot possibly connect to computer A, but the red user has connected B to E despite not having a direct link between them in some cases, a given pair of nodes will be connected by more than one edge in the example, there are two independent cables running from D to E, so the green and blue users were both able to connect those machines directly; however, red can no longer make such a connection if two computers are connected by more than one cable, each user may own no more than one of those cables I'll need to do several operations on this graph, such as: determining whether any particular pair of computers is connected for a given user identifying the optimal path for a given user to connect target computers identifying the highest-latency computer connection for a given user (i.e. longest path without branching) My first thought was to simply create a collection of all of the edges, but that's terrible for searching. The best thing I can think to do now is to modify an adjacency list so that each item in the list contains not only the edge length but also its cost and current owner. Is this a sensible approach? Assuming space is not a concern, would it be reasonable to create multiple copies of the graph (one for each user) rather than a single graph?

  Read the article

• Ubuntu running like mud, system hangs and looks like its running at 3FPS

  - by user240803

  the system specks: AMD XP 3200+ 1GB DDR 333 RAM 160 GB HD IDE NVIDIA FX 5500 AGP Video Card Compaq Presario sr1230nx the system takes forever to boot and when it does it runs like total mud, reminds me of an overloaded system that has too many windows open or something... fresh install tried soo many thing like new memory (it had 512 stick) a new video card (onboard 8mb sis sounded like the problem, but wasn't... has gotten a little faster now but not by much) tried to disable all the things on the motherboard that could be, with no help... this machine runs windows XP, 7, and 8 JUST FINE!!! I mean for a single core CPU WIN8 runs AWESOME!!! BUT I already have a Gaming Desktop that has Windows 8 pro I want a Linux machine to get some time in and learn a few things... I want Ubuntu because of the Software center so I can install things I want until I am familiar with the command line.. I've worked on Computers since I was 12 I remember some of the DOS commands but I guess these are a little different... anyway any ideas? Ive also tried both drivers for the NVIDA card and that didn't help either... its not the card since it did this with both the NVIDA card and the SIS onboard... it also does this on live mode with the USB so I don't think its the HardDrive... I'm running out of options of hardware to try... I know this version of Linux works cuz Ive booted it on other machines and it ran great... what is with this Compaq? here is a vid of exactly what its doing... let me know if you need anything else I am right by the comptuer tonight so ask anything... http://youtu.be/-P-XNo81098

  Read the article

• What can I do to utilize all my hard disk space?

  - by Twatcher

  I had windows XP running on my computer. Then I installed Ubuntu from under windows. Then I decided I wanted to have only Ubuntu also because I got a system message that I am out of disk space. I loaded up my system from a live Ubuntu DVD and deleted the partition with windows on it and also the other partition that had my data on it. I expanded the partition which I thought to be the system partition (since there was no other partition left It had ext format. After that Ubuntu was working fine and I thought I have enough disk space, since my harddrive is an 80 GB ATA Maxtor. I left a small partition as backup. But after downloading a small amount of files I got the message again, that I am running out of disk space. I don't now. How can UI make my disk space bigger? I am not used to Ubuntu's file system, and I don't have the overview on how I can actually see how much space there is left for me to use. I have basically now 1 partition with the system on it and one small backup (as far as I understand). My system is (from system utility) Ubuntu 12.04 LS 3,9 GB Intel Core 2 2,4 Ghz 80 GB ATA Maxtor Here are the results for sudo fdisk -l Disk /dev/sda: 80.0 GB, 79998918144 bytes<br> 255 heads, 63 sectors/track, 9725 cylinders, total 156247887 sectors<br> Units = sectors of 1 * 512 = 512 bytes<br> Sector size (logical/physical): 512 bytes / 512 bytes<br> I/O size (minimum/optimal): 512 bytes / 512 bytes<br> Disk identifier: 0x41ab2316<br> Device Boot Start End Blocks Id System<br> /dev/sda1 * 63 123750399 61875168+ 7 HPFS/NTFS/exFAT<br> /dev/sda2 123750400 156246015 16247808 7 HPFS/NTFS/exFAT<br>

  Read the article

• Should I build a multi-threaded system that handles events from a game and sorts them, independently, into different threads based on priority?

  - by JonathonG

  Can I build a multi-threaded system that handles events from a game and sorts them, independently, into different threads based on priority, and is it a good idea? Here's more info: I am about to begin work on porting a mid-sized game from Flash/AS3 to Java so that I can continue development with multi-threading capabilities. Here's a small bit of background about the game: The game contains numerous asynchronous activities, such as "world updating" (the game environment is constantly changing based on a set of natural laws and forces), procedural generation of terrain, NPCs, quests, items, etc., and on top of that, the effects of all of the player's interactions with his environment are programmatically calculated in real time, based on a set of constantly changing "stats" and once again, natural laws and forces. All of these things going on at once, in an asynchronous manner, seem to lend themselves to multi-threading very well. My question is: Can I build some kind of central engine that handles the "stacking" of all of these events as they are triggered, and dynamically sorts them out amongst the available threads, and would it be a good idea? As an example: Essentially, every time something happens (IE, a magic missile being generated by a spell, or a bunch of plants need to grow to their next stage), instead of just processing that task right then and adding the new object(s) to a list of managed objects, send a reference to that event to a core "event handler" that throws it into a stack of all other currently queued events, which then sorts them out and orders them according to urgency, splits them between a number of available threads for as-fast-as-possible multithreaded execution.

  Read the article

• Is Akka a good solution for a concurrent pipeline/workflow problem?

  - by herpylderp

  Disclaimer: I am brand new to Akka and the concept of Actors/Event-Driven Architectures in general. I have to implement a fairly complex problem where users can configure a "concurrent pipeline": Pipeline: consists of 1+ Stages; all Stages execute sequentially Stage: consists of 1+ Tasks; all Tasks execute in parallel Task: essentially a Java Runnable As you can see above, a Task is a Runnable that does some unit of work. Tasks are organized into Stages, which execute their Tasks in parallel. Stages are organized into the Pipeline, which executes its Stages sequentially. Hence if a user specifies the following Pipeline: CrossTheRoadSafelyPipeline Stage 1: Look Left Task 1: Turn your head to the left and look for cars Task 2: Listen for cars Stage 2: Look right Task 1: Turn your head to the right and look for cars Task 2: Listen for cars Then, Stage 1 will execute, and then Stage 2 will execute. However, while each Stage is executing, it's individual Tasks are executing in parallel/at the same time. In reality Pipelines will become very complicated, and with hundreds of Stages, dozens of Tasks per Stage (again, executing at the same time). To implement this Pipeline I can only think of several solutions: ESB/Apache Camel Guava Event Bus Java 5 Concurrency Actors/Akka Camel doesn't seem right because its core competency is integration not synchrony and orchestration across worker threads. Guava is great, but this doesn't really feel like a subscriber/publisher-type of problem. And Java 5 Concurrency (ExecutorService, etc.) just feels too low-level and painful. So I ask: is Akka a strong candidate for this type of problem? If so, how? If not, then why, and what is a good candidate?

  Read the article

• What are the challenges of implementing an ERP system?

  When a company decides to rollout an ERP system as part of its core business processes they must consider and provide solutions for the following general challenges. It is important to note that this list is generic and that every ERP system that rolls out is as distinct as the companies that are trying to implement the system. Upper Management Support Reengineering Existing Business Process and Applications Integration of the ERP with other existing departmental applications Implementation Time Implementation Costs Employee Training I just recently read an article by Mano Billi called “What are the major challenges in implementing ERP? “ were he basically outlines the common challenges to implementing an ERP system within a company. He discusses items like Upper management support, altering existing systems, and how ERPs integrate with other independent systems. In addition, he also covers items on selecting a ERP vendor, ERP Consultants, and the effects of an ERP system on employees.  I personally think he did a create job of outlining common issues that can cause an ERP implementation to fail or not be as effective as it potentially could be if the challenges are not taken in to account appropriately.

  Read the article

• USB mouse pointer only moving horizontally on macbook 6.2 with 12.04

  - by Glyn Normington

  After installing Ubuntu 12.04 on a macbook pro 6.2, the touchpad and external USB mouse worked perfectly. After rebooting I can't get either touchpad or external USB mouse to work. Sometimes no mouse pointer is visible, but more often I can only move the mouse pointer horizontally five sixths of the way across the display (from the top left). I have uninstalled mouseemu. xinput list shows the USB mouse. xinput query-state for the USB mouse shows the following: ButtonClass button[1]=up ... button[16]=up ValuatorClass Mode=Relative Proximity=In valuator[0]=480 valuator[1]=2400 valuator[2]=0 valuator[3]=3 and re-issuing this command with the pointer at its right hand extreme displays the same except for: valuator[0]=1679 So the valuator[0] seems to be the x-coordinate of the pointer and the range of motion 480-1679 is indeed about five sixths of the display width (1440). valuator[1] is suspiciously large given the display height is 900. Perhaps this is a side-effect of having previously been using a dual monitor (although booting with that monitor connected does not help). There are other entries listed under xinput list: Virtual core XTEST pointer which seems stuck at position (840,1050). bcm5974 which seems stuck at position (837,6700). Removing the bcm5974 module using rmmod disables the toucpad as expected but does not fix the USB mouse problem. After adding the module back, it is stuck at position (840,1050) instead of (837,6700). /etc/X11/xorg.conf was generated by nvidia-settings and contains: Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "ZAxisMapping" "4 5" although I don't know how plausible these settings are. Any suggestions?

  Read the article

• Installing latest version of R-base

  - by Student

  I have been unsuccessfully trying to install the latest version (2.15.2) of r-base. Apparently, R package "Rcpp" would not install for R version 2.14.1 - the version that installs for me. I am not sure what/how/where to change my installation attempts which appear below. Please note that I am using ubuntu-12.04.1-server-i386. (1) ------------ The current installed version is R version 2.14.1 (2011-12-22) sudo apt-get install r-base Reading package lists... Done Building dependency tree Reading state information... Done r-base is already the newest version. (2) ------------ Including version information doesn't help: sudo apt-get install r-base=2.15.1-5ubuntu1 Reading package lists... Done Building dependency tree Reading state information... Done E: Version '2.15.1-5ubuntu1' for 'r-base' was not found (3) ------------- Changes based on CRAN Ubuntu instructions http://cran.r-project.org/bin/linux/ubuntu/README 3.1: Added to /etc/apt/sources.list deb http://lib.stat.cmu.edu/R/CRAN/bin/linux/ubuntu quantal/ 3.2: sudo apt-get update 3.3: sudo apt-get install r-base Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: r-base : Depends: r-base-core (= 2.15.2-1quantal2) but it is not going to be installed Depends: r-recommended (= 2.15.2-1quantal2) but it is not going to be installed Recommends: r-base-html but it is not going to be installed E: Unable to correct problems, you have held broken packages.

  Read the article

• Sandcastle Help File Builder - October 2010 release

  - by TATWORTH

  At http://shfb.codeplex.com/releases/view/92191, the latest Sandcastle has been released. I am pleased to say that it incorporates the generic version of a fix, I originated that allows projects including Crystal Reports to be documented.Here is the relevant passage from the help file:"The default configuration for MRefBuilder has been updated to ignore the Crystal Reports licensing assembly (BusinessObjects.Licensing.KeycodeDecoder) if it fails to get resolved. This assembly does not appear to be available and ignoring it prevents projects that include Crystal Reports assemblies from failing and being unbuildable."There are many other fixes. Here are the release notes:IMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog.This release supports the Sandcastle October 2012 Release (v2.7.1.0). It includes full support for generating, installing, and removing MS Help Viewer files. This new release supports Visual Studio 2010 and 2012 solutions and projects as documentation sources, and adds support for projects targeting the .NET 4.5 Framework, .NET Portable Library 4.5, and .NET for Windows Store Apps.See the Sandcastle 2.7.1.0 Release Notes for details on all of the changes made to the underlying Sandcastle tools and presentation styles.This release uses the Sandcastle Guided Installation package. Download and extract to a folder and then runSandcastleInstaller.exe to run the guided installation of Sandcastle, the various extra items, the Sandcastle Help File Builder core components, and the Visual Studio extension package.What's IncludedHelp 1 compiler check and instructions on where to download it and how to install it if neededHelp 2 compiler check and instructions on where to download it and how to install it if neededSandcastle October 2012 2.7.1.0An option to install the MAML schemas in Visual Studio to provide IntelliSense for MAML topicsSandcastle Help File Builder 1.9.5.0SHFB Visual Studio Extension PackageFor more information about the Visual Studio extension package, see the Visual Studio Package help file topic.

  Read the article

• Wireless BMC4311 driver install

  - by user113910

  Exasperated with Ubuntu 12.04 and BCM4311 driver. HP2133 (was SUSE 10) Installed 12.04 in March. It ran well until November with no updates) then updates killed my wireless controller. Trolled forums & other for fix. Tried sudo -apt-get ing & gedit ing. Finally got it working (on full update with STA driver) Hwew!—thought that was it, only to fail again after 3-4 days. Tried all the fixes again but sudo -apt-get ing & gedit ing does not fix. I'm not without experience either: first 'boot-loader' I/P from 20 switch panel, seq to 4096 bit core-store: run to I/P larger processes from paper tape reader. Gone thru acoustic-coupled networks-to-billboards (before 'the net') pre-DOS, DOS, Windows 3.1 & all the others. This is a tough problem. Any advice?

  Read the article

• I can't enable extra effects in Ubuntu 10.10. Please help?

  - by jasoncruz98

  I installed Ubuntu 10.10 alongside Ubuntu 11.10 to use an older version of Compiz. On Ubuntu 11.10, Compiz was enabled by default and I didn't need to use any graphics driver to enjoy the effects. All I had to do was install CompizConfig Settings Manager and enable those extra effects. That was Compiz 0.9.6. Now, after installing Ubuntu 10.10, when I first logged in, the graphics were slow. When I dragged a window from one end of the screen to the other, the whole screen would blur up and pixelate and it would be very laggy. I tried going to System Preference Appearance and selecting Extra effects on the Visual effects tab, but all I got was "Desktop effects could not be enabled". I don't know whether I should install the Additional drivers (proprietary) because my Internet is slow and it would take a long time. Furthermore, in Ubuntu 11.10, after I installed the proprietary graphics driver, I immediately went into fallback mode and wasn't even offered an option to set my desktop session to Ubuntu 3D. I didn't need the driver to run Compiz in Ubuntu 11.10, it just ran so smoothly. But in Ubuntu 10.10, everything is so laggy. Should I install the ATI/AMD Proprietary FGLRX Graphics Driver for Ubuntu 10.10 to enable extra effects? Or is there something else wrong with my system? Here is the output of lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation Sandy Bridge Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:6760] Here is the output of the same command, but in Ubuntu 11.10 (in this case the one which is correct, because I don't have the Sandy Bridge Integrated graphics controller) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M] [1002:6760]

  Read the article

• can't get a good install:11.10 server

  - by jack

  I screwed up my partitioning aparently tring to get lvm and raid1 going. the machine is an intel dual core dt with 2 gig of ram and 2 sata drives, one 250g and the other 500g. This a build for my school in n.e. Thailand. we have 20+ clients now, a website, email. Our old server is dying fast and we are going to add another 12 stations next week. I really need some help here! 1. have onboard gigabit ethernet that aparently uses same driver as realtek 811c. I installed a pcie gigabit card also 811c. At several points the eth0 has accessed the internet fine, but the eth1 will not communicate. 2. I saw a "fix" for this online which from root: rmmod r8169. this imediately killed the working onboard card. 3.I tried to re-install 11.10 figuring that would re-install r8169. However I messed something up in my partitioning and can't get a clean boot now. 6. so I think after 12 re-installs or so and 2 days. I can get through it right if I can start over with clean drives, but I can't figure out how to empty them out what with soft raid and lvm partitions. seems like i've had it going well and then trying to fix that one little problem, i go backwards.Please help! please send email.-thanks

  Read the article

• TechEd 2012: Windows Phone Exam Cram

  - by Tim Murphy

  Usually speakers take offence if you wear headphones in their talk.  For the exam cram session it was a requirement.  This was because it was a cubical walled room with an open top next to a study hall. While no-one was going to come out of this session ready to take a test, I am glad that I took the time to attend it.  There was a fair amount of material that you should know already if you have ever taken a certification test before.  This was packed around a mix of key concepts and some tidbits that marked where some of the pitfalls are for this particular test.  The biggest warning was that the test is based on Windows Phone 7.0 and not Mango meaning that you have to be careful that you don’t answer a question in the wrong context. I would suggest if you have a chance to take attend a free session grab it.  It is a good break from the other hard core talks and will get your mind into a mode for getting your next certification.  Good luck. del.icio.us Tags: TechEd,TechEd 2012,Windows Phone,Exam Cram,Certification

  Read the article

• Installing ubuntu 12.04 on macbook pro9,2

  - by stariz77

  I seem to have tried all the various suggested methods for installing ubuntu on a mbp, but can't seem to get anything that works and was wondering if anyone has run into any new problems with the latest non-retina models? I have a core i7 in my macbook, and model identifier is MacBookPro9,2. I have partitioned my HD using disk utility and have 700gig free space ready for the install (I haven't removed OSX Lion, it is still there in a 50gig partition). Problem: I am just getting a blank screen with a blinking cursor (unresponsive) in the top left whenever I boot from the disk. I left it for 20 minutes and nothing ever happened. This was without any boot manager, just holding "c" on startup. Attempted remedies: I have downloaded the 64 ubuntu iso from their site 3 times now and burned 4 separate discs to rule out some kind of corruption or burn error. I burned one in OSX Lion 10.7.4 and 3 on my windows 7 pc. I tried holding "alt" instead and then navigating to the windows disc to boot. Same thing happens, blank blinking unresponsive cursor. I also tried going to the EFI disc which actually brings up a menu (after saying "error prefix is not set") asking if I want to install ubuntu, test for errors or partition. All three options lead me to an unresponsive blank screen (some without cursors). I downloaded and installed rEFIt and if I hold "alt" on startup a linux penguin (Boot Linux from CD) appears in my boot options, along with the apple boot, and two others that I'm not sure of: "Boot EFI\boto\bootx64.efi from" and "Boot Legacy OS from". The "Boot Linux from CD" just takes me to the blank blinking cursor screen; again, I left if for 10+ minutes and nothing. I heard that the detection of the graphics card might be a problem and that I need change to nomodeset, but I have tried pressing F6 in all of the boot menus listed above and no options appear. Does anyone have any other suggested routes or can you see what I might have done wrong?

  Read the article

• Move unity launcher to bottom of the screen

  - by argvar

  I have Ubuntu 13.04 DESKTOP version and for some odd reason I'm told that the Unity launcher cannot be moved to the bottom of the screen because of several reasons: 1. Canonical wants it there so it fits with their overall design goals, namely when it comes to touchscreen devices and netbooks. This in my mind totally ignores the fact that most Ubuntu users are DESKTOP users. No matter what Canonicals long term goal is, it surely mustn't be at the expense of needs of their core user base. 2. Most monitors are widescreen, the launcher is more compact where it is. This is not only taking away the users choice, but is also a wrong assessment. Widescreen monitors can sometimes be rotated on a pivot, giving it a portrait aspect. By displaying the Unity launcher on the left side it takes up a lot of space. Many desktop users have multiple monitors, and having the launcher on the left side of each monitor is very awkward. Also, many websites are catered to fit on a half 1920 display, so you can have two browser windows open side-by-side with all content visible. The placement of the Unity launcher takes away the horizontal space meaning there's less room for each browser window, and you'll see the right side of the web pages being occluded. Any suggestion to simply hide the Unity launcher, or "Canonical knows best" or "get used to it" are unwelcome and totally ignores the above points. Linux is about choice. Canonical's stubbornness with the Unity launcher placement is inconsistent with what Linux is about.

  Read the article

• Data Synchronization in mobile apps - multiple devices, multiple users

  - by ProgrammerNewbie

  I'm looking into building my first mobile app. One of the core features of the application is that multiple devices/users will have access to the same data -- and all of them will have CRUD rights. I believe the architecture should involve a central server where all the data is stored. The devices will use an API to interact with the server to perform its data operations (e.g. adding a record, editing a record, deleting a record). I imagine a scenario where synchronizing the data will become a problem. Assume the application should work when it is not connected to the Internet, and thus cannot communicate with this central server. So: User A is offline and edits record #100 User B is offline and edits record #100 User C is offline and deletes record #100 User C goes online (presumably, record #100 should get deleted on the server) User A and B goes online, but the records they edited no longer exist All sorts of scenarios similar to the above can come up. How is this generally handled? I plan to use MySQL, but am wondering if it's not appropriate for such a problem.

  Read the article

• Impact of Server Failure on Coherence Request Processing

  - by jpurdy

  Requests against a given cache server may be temporarily blocked for several seconds following the failure of other cluster members. This may cause issues for applications that can not tolerate multi-second response times even during failover processing (ignoring for the moment that in practice there are a variety of issues that make such absolute guarantees challenging even when there are no server failures). In general, Coherence is designed around the principle that failures in one member should not affect the rest of the cluster if at all possible. However, it's obvious that if that failed member was managing a piece of state that another member depends on, the second member will need to wait until a new member assumes responsibility for managing that state. This transfer of responsibility is (as of Coherence 3.7) performed by the primary service thread for each cache service. The finest possible granularity for transferring responsibility is a single partition. So the question becomes how to minimize the time spent processing each partition. Here are some optimizations that may reduce this period: Reduce the size of each partition (by increasing the partition count) Increase the number of JVMs across the cluster (increasing the total number of primary service threads) Increase the number of CPUs across the cluster (making sure that each JVM has a CPU core when needed) Re-evaluate the set of configured indexes (as these will need to be rebuilt when a partition moves) Make sure that the backing map is as fast as possible (in most cases this means running on-heap) Make sure that the cluster is running on hardware with fast CPU cores (since the partition processing is single-threaded) As always, proper testing is required to make sure that configuration changes have the desired effect (and also to quantify that effect).

  Read the article

• Can certain system-hungry modules be disabled in Ubuntu?

  - by Ole Thomsen Buus

  Hi, Let me add some context: I am currently using Ubuntu 9.10 64-bit (Desktop) on a relatively powerful stationary PC (Intel Core i7 920, 12GB ram). My purpose is highspeed imaging with a pointgrey Grashopper machine-vision camera (for research, PhD project). This camera is capable of 200 fps at full VGA (640x480) resolution. The camera is connected using Firewire (1394b) and the drivers and software from Pointgrey works great. I have developed a console C++ application that can grap a certain number of frames to preallocated memory and after this also save the grapped frames to harddrive. Currently it works fine but sometimes I am observing a few framedrops (1-3). When this happens I reset the experiment and repeat the recording and usually i am lucky the second time with no framedrops (the camera-driver has a internal framecounter that I am using). Question: I usually go to tty1 and use "sudo service gdm stop" to disable the graphical frontend. It seems to release some memory though that is not my main concern. My concern is CPU resources. Are there other system hungry modules that can be disabled temporarily such that the CPU gets less busy on Ubuntu 9.10? At some point in the future I will update to 10.10. Should I perhaps option for the server edition instead? Thanks.

  Read the article

• Broadcom Wireless Issues in Lubuntu 14.04

  - by ratxinxaxcage67

  I recently installed Lubuntu 14.04 on my parents' old laptop, and I've been having a super difficult time getting the Broadcom card up and running. I've been following this thread: Installing Broadcom Wireless Drivers ...but I'm still stuck. lspci -vnn | grep Network showed: 06:05.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 02) iwconfig showed: lo no wireless extensions. eth0 no wireless extensions. I've installed b43-firmware-installer and b43-fwcutter and also the linux-firmware-nonfree package. At boot, I keep getting a b43-phy0 error, so I tried sudo rmmod b43, and I got: rmmod: ERROR: Module b43 is not currently loaded I also tried: dmesg | grep b43 [ 17.318405] b43legacy-phy0: Broadcom 4306 WLAN found (core revision 4) [ 17.384870] b43legacy-phy0: Loading firmware b43legacy/ucode4.fw [ 18.046777] b43legacy ssb0:0: Direct firmware load failed with error -2 [ 18.046785] b43legacy ssb0:0: Falling back to user helper [ 18.047858] b43legacy-phy0 ERROR: Firmware file "b43legacy/ucode4.fw" not found or load failed. [ 18.047965] b43legacy-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 3). I went to url it told me to, but it didn't tell me to do anything I haven't already tried. Any help and/or suggestions would be greatly appreciated!

  Read the article

• Grub2 won't detect Ubuntu 11.10 OS after reinstalling Win XP hal.dll.

  - by yoopian

  Hi I'm an Ubuntu newbie here. I've installed ubuntu 11.10 to dual boot on a single HDD. I did a manual partition and basically forgot all the on what sda my /boot partition is. My installation worked out just fine and I tried to install updates with it. After a while I when I wanted to boot to windows it showed that I was missing a "hal.dll" file. I've fixed this problem using the windows resource CD but then after booting up my PC it went straight to Windows XP. I've tried to manually reinstall Grub2 using a Live CD/USB and it worked but I think I have installed in on a different "sda#" (sda5 to be exact) because even though Grub2 loads when I boot my PC, only windows XP shows up as my OS and Ubuntu 11.10 is missing. Now, I've tried installing boot-repair to solve my problems using Live CD/USB. Boot-repair tells me that boot configuration was successful but then a basic grub interface shows up (the black one with a command line grub showing up. Now I can't even boot to Windows XP. Any help would be really appreciated. BTW here's the notes from boot repair that I was asked to save: http://paste.ubuntu.com/890228/ As you can see there are boot files on sda5 and sda7. I think that's the core problem that I have right now. Thanks in advance!

  Read the article

• NINTENDO, EDCON and ALLEGIS GROUP @ Oracle Open World 2012 Conference Session (CON9418): The Business Case for Oracle Exalogic: A Customer Perspective

  - by Sanjeev Sharma

   Are you looking to deliver breakthrough performance for packaged and custom  applications? For many front-office applications such as Oracle WebCenter Sites, Oracle Transportation Management, and Oracle’s ATG and Siebel product families,  improved  performance leads directly to greater revenue or cost savings from the business - a  compelling  proposition. For back-office applications, improved performance has tangible benefits  in terms of  footprint reductions. For all applications, Oracle Exalogic and Oracle Exadata provide an engineered solution that provides shorter time to value and lower operational costs.  Edcon is a leading clothing, footwear and textiles (CFT) retailing group in southern Africa trading through a range of retail formats. The Company has grown from opening it's first store in 1929, to ten retail brands trading in over 1000 stores in South Africa, Botswana, Namibia, Swaziland and Lesotho. Edcon's retail business has, through recent acquisitions, added top stationery and houseware brands as well as general merchandise to its CFT portfolio. Edcon was looking to consolidate their existing middleware components (Weblogic and Oracle SOA) and retail applications (Retek, Siebel and E-Business Suite) on a common platform and turned to Oracle Exalogic. With Oracle Exalogic, Edcon is able to derive significant HW CAPEX savings, improve response-time of core business applications and mitigate operating risk. Hear senior business leaders from Nintendo, Edcon and Allegis Group discuss how the business value of  leveraging Oracle Exalogic at the following conference session at Oracle Open World 2012: Session:  CON9418 - The Business Case for Oracle Exalogic: A Customer PerspectiveDate: Monday, 1 Oct, 2012Time: 1:45 pm - 2:45 pm (PST)Venue: Moscone South (306)

  Read the article

• Should I use OpenGL or DX11 for my game?

  - by Sundareswaran Senthilvel

  I'm planning to write a game from scratch (a BIG Game, for commercial purpose). I'm aware that there are certain compute libraries like OpenCL, AMD APP SDK, C++ AMP as well as DirectCompute - both from MS (NOT interested in CUDA) are available in the market. I'm planning to write the game from the scratch, which includes the following engines... Physics Engine AI Engine Main Game Engine (... and if anything is missed). I'm aware that, there are some free physics engine libraries in the market. Not sure about free AI engine libraries. I'm bit confused in choosing between the OpenCL, AMD APP SDK, and C++ AMP libraries (as already mentioned i'm NOT interested in CUDA). I want my game to be published in Windows/Android/Mac OSX. It means it should be a cross-platform game. I will be having "one source code" that i'll compile for various platforms like Windows/Android/Mac OSX, and any others if i missed. Note: Since I'm NOT a Java guy, kindly do NOT suggest me the Java Language. For Graphics language should i use OpenGL or DirectX 11? I have heard that OpenGL runs on a single core, and not sure of DirectX 11. Between OpenGL and DirectX which one should i follow? or else, are there any other graphics language that i need to start with? I want to make use of the parallelism in GPU as well as CPU.

  Read the article

• implementing dynamic query handler on historical data

  - by user2390183

  EDIT : Refined question to focus on the core issue Context: I have historical data about property (house) sales collected from various sources in a centralized/cloud data source (assume info collection is handled by a third party) Planning to develop an application to query and retrieve data from this centralized data source Example Queries: Simple : for given XYZ post code, what is average house price for 3 bed room house? Complex: What is estimated price for an house at "DD,Some Street,XYZ Post Code" (worked out from average values of historic data filtered by various characteristics of the house: house post code, no of bed rooms, total area, and other deeper insights like house building type, year of built, features)? In addition to average price, the application should support other property info ** maximum, or minimum price..etc and trend (graph) on a selected property attribute over a period of time**. Hence, the queries should not enforce the search based on a primary key or few fixed fields In other words, queries can be What is the change in 3 Bed Room house price (irrespective of location) over last 30 days? What kind of properties we can get for X price (irrespective of location or house type) The challenge I have is identifying the domain (BI/ Data Analytical or DB Design or DB Query Interface or DW related or something else) this problem (dynamic query on historic data) belong to, so that I can do further exploration My findings so far I could be wrong on the following, so please correct me if you think so I briefly read about BI/Data Analytics - I think it is heavy weight solution for my problem and has scalability issues. DB Design - As I understand RDBMS works well if you know Data model at design time. I am expecting attributes about property or other entity (user) that am going to bring in, would evolve quickly. hence maintenance would be an issue. As I am going to have multiple users executing query at same time, performance would be a bottleneck Other options like Graph DB (http://www.tinkerpop.com/) seems to be bit complex (they are good. but using those tools meant for generic purpose, make me think like assembly programming to solve my problem ) BigData related solution are to analyse data from multiple unrelated domains So, Any suggestion on the space this problem fit in ? (Especially if you have design/implementation experience of back-end for property listing or similar portals)

  Read the article

• help with migrating from Widows, x64 FGLRX, CPU load, Java and Minecraft

  - by joxer

  Im new to ubuntu, it is the second time i have installed it. This comp is Dell studio 1558. some specs: CPU- intel core i7 Q720 1.6GHz, GPU- ATI Mobility Radeon HD 5400 FGLRX- i've fallowed these instructions among inspecting many others, i have tried all of the variants mentioned in that tread before reverting back to the drivers supplied with Ubuntu ( through additional drivers ) which apparently seem to work best. i am testing them with minecraft as silly as it may sound. in 2 to 60 minutes the FPS drop from 70+ to somewhere between 0 and 5. while "fgl_glxgears" runs at between 400 and 800 FPS smoothly.. I am using oracle ( sun ) JRE6 to run minecraft, i have gotten it through a tutorial linked on oracle's website, i currently have no other version of java installed ( was worse when i had a few others here ). after closing the game Ubuntu is similarly slow, i've checked the CPU load using System Monitor and it shows one of the CPU's jumping to 80%~100% load at a time.. a reboot solves it. i realize my mess is up to me to solve but a hand is always appreciated. tyvm in advance.

  Read the article

< Previous Page | 230 231 232 233 234 235 236 237 238 239 240 241  | Next Page >