Search Results

Search found 13225 results on 529 pages for 'dynamic variables'.

Page 234/529 | < Previous Page | 230 231 232 233 234 235 236 237 238 239 240 241  | Next Page >

• Hyper-V and attaching physical disks

  - by Mike Christiansen

  So, I'm looking at rebuilding my home server. My current setup is the following Windows 7 Ultimate 1TB Boot Drive (my smallest drive) Windows Dynamic Spanned volume, continaing 1x 1TB drive, 2x 2TB drives, totalling 5TB. I am upgrading to a hardware RAID controller, and I would like to run Hyper-V server core. However, I want to retain the ability to join my "file server" to a homegroup, so I must use Windows 7. I know VHDs can only be like 127GB or something, so I obviously need to directly connect disks to my Windows 7 machine. Here is my plan: Server Core 2008 R2 (Hyper-V) 1TB Boot Drive (storing VHDs for boot drives of VMs) - possibly in a RAID 1 with my other 1TB drive 5x 2TB drives (1x 2TB drive hot spare), totalling 10TB, directly attached to a Windows 7 VM, for use of homegroup for this array. In the past, I directly attached the windows dynamic volume to a Windows 7 VM, and performance was abysmal. The question is, with hardware RAID, will it really make that much of a difference? Server specs: Intel Core 2 Quad Q9550 2.83GHz Asus Maximus II Formula (PCI-E x16) 8GB DDR2 RAM PC2-6400 (Yes, I know its a bit out of date)

  Read the article

• can't register a soft phone to asterisk11

  - by Tom

  I have a VM (on oracle vbox) running Fedora17. I've installed asterisk 11 on it from sources. I've followed the wiki for installation (https://wiki.asterisk.org/wiki/display/AST/Creating+SIP+Accounts) to the letter. The ip on the VM machine running fedora is 192.168.1.7 and I can ping it from the host machine (Ubuntu 12.04), which is at 192.168.1.2 I've tried registering with ekiga with the following settings: user: [email protected]. Password: verysecretpassword registar: 192.168.1.7 but I'm getting an error "transport fail". Also, while trying to register I'm logged in to the asterisk CLI with verbose level 3 and debug level 4 and nothing appears. some more relevant data: I've added the following code to the end of my sip.conf.sample file: [demo-alice] type=friend host=dynamic secret=verysecretpassword context=users deny=0.0.0.0/0 permit=192.168.1.0/255.255.255.0 [demo-bob] type=friend host=dynamic secret=othersecretpassword context=users deny=0.0.0.0/0 permit=192.168.1.0/255.255.255.0 After I changed the sip.conf.sample file, I've created a copy of it and named it sip.conf. then I logged in to the asterisk CLI and typed sip reload. Then I'm trying to register and ekiga client from my host machine at 192.168.1.2 but it doesn't work and nothing appears on the asterisk CLI while in verbose mode level 3. BTW, If there is missing information about my question, please don't close it. comment about what you need to know and I'll edit it in to the question. tnx.

  Read the article

• Tuning up a MySQL server

  - by NinjaCat

  I inherited a mysql server, and so I've started with running the MySQLTuner.pl script. I am not a MySQL expert but I can see that there is definitely a mess here. I'm not looking to go after every single thing that needs fixing and tuning, but I do want to grab the major, low hanging fruit. Total Memory on the system is: 512MB. Yes, I know it's low, but it's what we have for the time being. Here's what the script had to say: General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Enable the slow query log to troubleshoot bad queries When making adjustments, make tmp_table_size/max_heap_table_size equal Reduce your SELECT DISTINCT queries without LIMIT clauses Increase table_cache gradually to avoid file descriptor limits Your applications are not closing MySQL connections properly Variables to adjust: query_cache_limit (> 1M, or use smaller result sets) tmp_table_size (> 16M) max_heap_table_size (> 16M) table_cache (> 64) innodb_buffer_pool_size (>= 326M) For the variables that it recommends that I adjust, I don't even see most of them in the mysql.cnf file. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] innodb_buffer_pool_size = 220M innodb_flush_log_at_trx_commit = 2 innodb_file_per_table = 1 innodb_thread_concurrency = 32 skip-locking big-tables max_connections = 50 innodb_lock_wait_timeout = 600 slave_transaction_retries = 10 innodb_table_locks = 0 innodb_additional_mem_pool_size = 20M user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking bind-address = localhost key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 4 myisam-recover = BACKUP query_cache_limit = 1M query_cache_size = 16M log_error = /var/log/mysql/error.log expire_logs_days = 10 max_binlog_size = 100M skip-locking innodb_file_per_table = 1 big-tables [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] [isamchk] key_buffer = 16M !includedir /etc/mysql/conf.d/

  Read the article

• Logging Remote Server Access via Remote Desktop

  - by Nate Bross

  The objective here is to start a simple .NET application I've written which captures some environment variables (time, username, computername, etc) upon login. This .NET application subscribes to the Windows "User logout" event. Upon launch, the application captures the above variables, and creates a record in my database, upon logout (which I'm capturing) I update another field in the same record, with the logout time. The above is working exactly as I would like, when I launch the binary, it makes its initial log entry, then waits for the logout event and updates the same record. Restrictions, the .NET binary should be able to live on a share point (\server\share\myapp\v1) so I can update the application to (\server\share\myapp\v2) and simply update the GPO/Logon script. My initial thought was to use the \domaincontroller\sysvol\ directory to store the binary and then update all user accounts to include a call to my application. Can you see any flaws in this approach? My question is this: First, is there anything wrong with my idea above? Second, if so, what is the best way (through group policy or otherwise) to ensure this application launches whenever a session is started on a server?

  Read the article

• Windows Home Server 2011, No disks "suitable for a backup destination"

  - by Scott Beeson

  I recently installed Windows Home Server 2011 and love it. However, when I try to set up server backups, it says no suitable disks are available. Initially, before I set up my RAID, it found one of my twin drives and said it would work. Once I set up the mirroring, that one is no longer available (obviously). However, I have an internal SATA 1TB drive and an external USB2.0 1TB drive hooked up. Both are recognized by Disk Management. WHS11 still says nothing suitable for backups. The two drives details are as follows: Edit to clarify: The system partition is on Disk 0, not listed below. The two below are the two that SHOULD be available for system backups. Disk 1: Dynamic "Data" (D:) 931.51 GB NTFS, Healthy Disk 3: Basic 200 MB Healthy (EFI System Partition) "Backup" 930.66 GB NTFS, Healthy (Primary Partition) What's a bit odd is that in Disk Management the "Backup" volume does not show a drive letter, even though I assigned Z: (which is reflected in "My Computer". I also cannot make this a dynamic disk as it says it's unsupported by the device.

  Read the article

• Setup shared internet connection on virtualbox with fixed IP

  - by Tom

  I am a web developer and until recently I have been using ubuntu as my OS. For many reasons, I have switched back to windows. I still want to keep my server on linux platform, so I setup my local server as a virtual machine. Everything works great, but i have a little struggle with the networking. Since I am working in different places and going around clients, I connect to all sorts of network with different settings. That means the possible IP range is very dynamic which causes issues when I work on my local server. At the moment I have a dynamic IP on my host and static IP on my guest. That way I can access the server from my host (by adding record to hosts file). I also have internet connection on the guest. But once i change networks, it does not work (assuming the network has different configuration). My question is, how to setup host-guest networking, so no matter what network I connect to, I can keep my static IP on guest, which is registered in hosts file on my host so I can access the webserver and also I will have internet connection on the guest? Hope it make sense. Thank you

  Read the article

• Hyper-V and attaching physical disks [migrated]

  - by Mike Christiansen

  So, I'm looking at rebuilding my home server. My current setup is the following Windows 7 Ultimate 1TB Boot Drive (my smallest drive) Windows Dynamic Spanned volume, continaing 1x 1TB drive, 2x 2TB drives, totalling 5TB. I am upgrading to a hardware RAID controller, and I would like to run Hyper-V server core. However, I want to retain the ability to join my "file server" to a homegroup, so I must use Windows 7. I know VHDs can only be like 127GB or something, so I obviously need to directly connect disks to my Windows 7 machine. Here is my plan: Server Core 2008 R2 (Hyper-V) 1TB Boot Drive (storing VHDs for boot drives of VMs) - possibly in a RAID 1 with my other 1TB drive 5x 2TB drives (1x 2TB drive hot spare), totalling 10TB, directly attached to a Windows 7 VM, for use of homegroup for this array. In the past, I directly attached the windows dynamic volume to a Windows 7 VM, and performance was abysmal. The question is, with hardware RAID, will it really make that much of a difference? Server specs: Intel Core 2 Quad Q9550 2.83GHz Asus Maximus II Formula (PCI-E x16) 8GB DDR2 RAM PC2-6400 (Yes, I know its a bit out of date)

  Read the article

• MysqlTunner and query_cache_size dilemma

  - by wbad

  On a busy mysql server MySQLTuner 1.2.0 always recommends to add query_cache_size no matter how I increase the value (I tried up to 512MB). On the other hand it warns that : Increasing the query_cache size over 128M may reduce performance Here are the last results: >> MySQLTuner 1.2.0 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.5.25-1~dotdeb.0-log [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: +Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in InnoDB tables: 6G (Tables: 195) [--] Data in PERFORMANCE_SCHEMA tables: 0B (Tables: 17) [!!] Total fragmented tables: 51 -------- Security Recommendations ------------------------------------------- [OK] All database users have passwords assigned -------- Performance Metrics ------------------------------------------------- [--] Up for: 1d 19h 17m 8s (254M q [1K qps], 5M conn, TX: 139B, RX: 32B) [--] Reads / Writes: 89% / 11% [--] Total buffers: 24.2G global + 92.2M per thread (1200 max threads) [!!] Maximum possible memory usage: 132.2G (139% of installed RAM) [OK] Slow queries: 0% (2K/254M) [OK] Highest usage of available connections: 32% (391/1200) [OK] Key buffer size / total MyISAM indexes: 128.0M/92.0K [OK] Key buffer hit rate: 100.0% (8B cached / 0 reads) [OK] Query cache efficiency: 79.9% (181M cached / 226M selects) [!!] Query cache prunes per day: 1033203 [OK] Sorts requiring temporary tables: 0% (341 temp sorts / 4M sorts) [OK] Temporary tables created on disk: 14% (760K on disk / 5M total) [OK] Thread cache hit rate: 99% (676 created / 5M connections) [OK] Table cache hit rate: 22% (1K open / 8K opened) [OK] Open file limit used: 0% (49/13K) [OK] Table locks acquired immediately: 99% (64M immediate / 64M locks) [OK] InnoDB data size / buffer pool: 6.1G/19.5G -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance Reduce your overall MySQL memory footprint for system stability Increasing the query_cache size over 128M may reduce performance Variables to adjust: *** MySQL's maximum memory usage is dangerously high *** *** Add RAM before increasing MySQL buffer variables *** query_cache_size (> 192M) [see warning above] The server has 76GB ram and dual E5-2650. The load is usually below 2. I appreciate your hints to interpret the recommendation and optimize the database configs.

  Read the article

• Cannot make bind9 forward DNS query to subdomain unless recursive enabled

  - by PP.

  I am trying to develop my own dynamic DNS. I'm running my own custom DNS for the subdomain on port 5353. ASCII diagram: INET --->:53 Bind 9 --->:5353 node.js | V zone_files I have example.com. The node.js DNS is for dyn.example.com. In my /etc/bind/named.conf.local I have: zone "example.com" { type master; file "/etc/bind/db.com.example"; allow-transfer { zonetxfrsafe; }; }; zone "dyn.example.com" IN { # DYNAMIC type forward; forwarders { 127.0.0.1 port 5353; }; forward only; }; I've even gone so far as to add a NS in my example.com zone file: $TTL 86400 @ IN SOA ns.example.com. hostmaster.example.com. ( 2013070104 ; Serial 7200 ; Refresh 1200 ; Retry 2419200 ; Expire 86400 ) ; Negative Cache TTL ; NS ns ; inet of our nameserver ns A 1.2.3.4 ; NS record for subdomain dyn NS ns When I attempt to get a record from the subdomain server it doesn't get forwarded: dig @127.0.0.1 test.dyn.example.com However if I turn recursive on in /etc/bind/named.conf.options: options { recursion yes; } .. then I CAN see the request going to the subdomain server. But I don't want recursion yes; in my Bind configuration as it is poor security practice (and allows all-and-sundry requests that are not related to my managed zones). How does one forward (proxy) zone queries for just one zone? Or do I give up on Bind altogether and find a DNS server that can actually forward specific queries?

  Read the article

• Logging Remote Desktop to Servers via Logon Script or GPO or What?

  - by Nate Bross

  The objective here is to start a simple .NET application I've written which captures some environment variables (time, username, computername, etc) upon login. This .NET application subscribes to the Windows "User logout" event. Upon launch, the application captures the above variables, and creates a record in my database, upon logout (which I'm capturing) I update another field in the same record, with the logout time. The above is working exactly as I would like, when I launch the binary, it makes its initial log entry, then waits for the logout event and updates the same record. Restrictions, the .NET binary should be able to live on a share point (\server\share\myapp\v1) so I can update the application to (\server\share\myapp\v2) and simply update the GPO/Logon script. My initial thought was to use the \domaincontroller\sysvol\ directory to store the binary and then update all user accounts to include a call to my application. Can you see any flaws in this approach? My question is this: First, is there anything wrong with my idea above? Second, if so, what is the best way (through group policy or otherwise) to ensure this application launches whenever a session is started on a server?

  Read the article

• How expensive is a hostname in htaccess? Other solutions possible?

  - by Nanne

  For easy allow or disallowing of dynamic IP-adresses you can add them as a hostname in a .htaccess file. As I have read from: .htaccess allow from hostname? it does a reverse lookup on the connecting ip address, seeing if the response matches the allowed name. (Well, actually Apache is doing a double lookup, first a reverse lookup and then a forward lookup on the result of the reverse.) This is the reason we are currently not using dynamic-ip hostnames in the .htaccess: this "sounds" quite heavy: 2 extra lookups for every request. Is this indeed quite heavy, and would a reasonably busy server that is rather looking for less then more load get away with this :)? (e.g.: how does this 'load' compare to the rest? If a request is 1000 times more expensive then the lookups it might be negligible. otoh, it could be that final straw :) ) Are there other solutions? I can write a script that does a lookup of the hostname and put it in .htaccess files ofcourse, but this feels a bit like a hack.

  Read the article

• Is is possible to guide installation of new programs using %ProgramFiles%? [closed]

  - by ??????? ???????????

  The purpose of this is to have the default "program files" (32 and 64 bit) folders located under an arbitrary path, possibly on a drive separate from where windows lives. Initially I thought that this may be done using a system environment variable through the dialog located under Control Panel - System - Advanced - Environment Variables. These variables turned out to be set in the registry under the key HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion. However, one particular entry is confusing. The ProgramFilesPath entry seems to point at an environment variable that is not defined under the same registry key. I could assume that the difference between ProgramFilesDir and ProgramFilesPath is none and that one of them exists as a backwards compatibility, but having some legitimate resource from Microsoft to look at would be better than guessing. After receiving some worrying feedback about having both 32 and 64bit applications in the same folder, I have decided not to ask about the feasibility of this to avoid discussion. The real question is if the desired effect is possible to attain by "cutting into" the windows setup process and modifying those registry entries as early as possible. These settings should be system wide and not only for software installed by a particular user. If this is indeed something that can be done, I wonder if there are any subtle pitfalls. Programs that expect libraries and other resources to be in default locations can probably be dealt with using the same technique as employed by Windows to re-map the "Documents and Settings" folders and the like (i.e. breaking legacy applications is not real concern).

  Read the article

• Easily Plotting Multiple Data Series in Excel

  - by John

  I really need help figuring out how to speed up graphing multiple series on a graph. I have seperate devices that give monthly readings for several variables like pressure, temperature, and salinity. Each of these variables is going to be its own graph with devices being the series. My x-axis is going to be the dates that these values were taken. The problem is that it takes ages to do this for each spreadsheet since I have monthly dates from 1950 up to the present and I have about 50 devices in each spreadsheet. I also have graphs for calculated values that are in columns next to them. Each of these devices is going to become a data series in the graph. E.g. In one of my graphs I have all the pressures from the devices and each of the data series' names is the name of the device. I want a fast way to do this. Doing this manually is taking a very long time. Please help! Is there any easier way to do this? It is consistent and the dates all line up. I am just repeating the same clicks over and over again Thank you!

  Read the article

• jQuery.closest(); traversing down the DOM not up

  - by Alex

  Afternoon peoples. I am having a bit of a nightmare traversing a DOM tree properly. I have the following markup <div class="node" id="first-wh"> <div class="content-heading has-tools"> <div class="tool-menu" style="position: relative"> <span class="menu-open stepper-down"></span> <ul class="tool-menu-tools" style="display:none;"> <li><img src="/resources/includes/images/layout/tools-menu/edit22.png" /> Edit <input type="hidden" class="variables" value="edit,hobbies,text,/theurl" /></li> <li>Menu 2</li> <li>Menu 3</li> </ul> </div> <h3>Employment History</h3></div> <div class="content-body editable disabled"> <h3 class="dates">1st January 2010 - 10th June 2010</h3> <h3>Company</h3> <h4>Some Company</h4> <h3>Job Title</h3> <h4>IT Manager</h4> <h3>Job Description</h3> <p class="desc">I headed up the IT department for all things concerning IT and infrastructure</p> <h3>Roles &amp; Responsibilities</h3> <p class="desc">It is a long established fact that a reader will be distracted by the readable content of a page when looking at its layout. The point of using Lorem Ipsum is that it has a more-or-less normal distribution of letters, as opposed to using 'Content here, content here', making it look like readable English. Many desktop publishing packages and web page editors now use Lorem Ipsum as their default model text, and a search for 'lorem ipsum' will uncover many web sites still in their infancy. Various versions have evolved over the years, sometimes by accident, sometimes on purpose (injected humour and the like).</p> </div> <div class="content-body edit-node edit-node-hide"> <input class="variables" type="hidden" value="id,function-id" /> <h3 class="element-title">Employment Dates</h3> <span class="label">From:</span> <input class="edit-mode date date-from" type="text" value="date" /> <span class="label">To:</span> <input class="edit-mode date date-to" type="text" value="date" /> <h3 class="element-title">Company</h3> <input class="edit-mode" type="text" value="The company I worked for" /> <h3 class="element-title">Job Title</h3> <input class="edit-mode" type="text" value="My job title" /> <h3 class="element-title">Job Description</h3> <textarea class="edit-mode" type="text">The Job Title</textarea> <h3 class="element-title">Roles &amp; Responsibilities</h3> <textarea class="edit-mode" type="text">It is a long established fact that a reader will be distracted by the readable content of a page when looking at its layout. The point of using Lorem Ipsum is that it has a more-or-less normal distribution of letters, as opposed to using 'Content here, content here', making it look like readable English. Many desktop publishing packages and web page editors now use Lorem Ipsum as their default model text, and a search for 'lorem ipsum' will uncover many web sites still in their infancy. Various versions have evolved over the years, sometimes by accident, sometimes on purpose (injected humour and the like).</textarea> <div class="node-actions"> <input type="checkbox" class="checkdisable" value="This is a checkbox"/>This element is visible .<br /> <input type="submit" class="account-button save" value="Save" /> <input type="submit" class="account-button cancel" value="Cancel" /></div> </div></div> ... And I am trying to traverse from input.save at the bottom right the way up to div.node... This all works well with one copy of the markup but if I duplicate it (obvisouly changing the ID of the uppermost div.node and use jQuery.closest('div.node') for the upper of the div.node's it will return the element below it not the element above it (which is the right one). I've tried using parents() but that also has it's caveats. Is there some kind of contexyt that can be attached to closest to make it go up and not down? or is there a better way to do this. jQuery code below. $(".save").click(function(){ var element=$(this); var enodes=element.parents('.edit-node').find('input.variables'); var variables=enodes.val(); var onode=element.closest('div.node').find('.editable'); var enode=element.closest('div.node').find('.edit-node-hide'); var vnode=element.closest('div.node-actions').find('input.checkdisable'); var isvis=(vnode.is(":checked")) ? onode.removeClass('disabled') : onode.addClass('disabled'); onode.slideDown(200); enode.fadeOut(100); }); Thanks in advance. Alex P.S It seems that stackoverflow has done something weird to the markup! - I just triple checked it and it is fine but for some reason it's concate'd it below

  Read the article

• ASP.NET how to save textbox in database?

  - by mahsoon

  I used some textboxes to get some info from users + a sqldatasource <tr> <td class="style3" colspan="3" style="font-size: medium; font-family: 'B Nazanin'; font-weight: bold; position: relative; right: 170px" > &nbsp; ????? ??????? ????</td> </tr> <tr> <td class="style3"> &nbsp;&nbsp;&nbsp; <asp:Label ID="Label1" runat="server" Text=" ???: " Font-Bold="True" Font-Names="B Nazanin" Font-Size="Medium"></asp:Label> </td> <td class="style2"> <asp:TextBox ID="FirstName" runat="server"></asp:TextBox> </td> <td class="style4"> <asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" Display="Dynamic" ErrorMessage="???? ???? ??? ?????? ???" ControlToValidate="FirstName">*</asp:RequiredFieldValidator> </td> </tr> <tr> <td class="style3"> &nbsp;&nbsp;&nbsp;<asp:Label ID="Label2" runat="server" Text=" ??? ????????: " Font-Bold="True" Font-Names="B Nazanin" Font-Size="Medium"></asp:Label> </td> <td class="style2"> <asp:TextBox ID="LastName" runat="server"></asp:TextBox> </td> <td class="style4"> <asp:RequiredFieldValidator ID="RequiredFieldValidator2" runat="server" Display="Dynamic" ErrorMessage="???? ???? ??? ???????? ?????? ???" ControlToValidate="LastName">*</asp:RequiredFieldValidator> </td> </tr> <tr> <td class="style3"> &nbsp;&nbsp;&nbsp;<asp:Label ID="Label3" runat="server" Text=" ????? ???????? : " Font-Bold="True" Font-Names="B Nazanin" Font-Size="Medium"></asp:Label> </td> <td class="style2"> <asp:TextBox ID="StudentNumber" runat="server"></asp:TextBox> </td> <td class="style4"> <asp:RequiredFieldValidator ID="RequiredFieldValidator3" runat="server" Display="Dynamic" ErrorMessage="???? ???? ????? ???????? ?????? ???" ControlToValidate="StudentNumber">*</asp:RequiredFieldValidator> </td> </tr> <tr> <td class="style3"> &nbsp;&nbsp;<asp:Label ID="Label4" runat="server" Text="  ????? ???? : " Font-Bold="True" Font-Names="B Nazanin" Font-Size="Medium"></asp:Label> </td> <td class="style2"> <asp:TextBox ID="DateOfBirth" runat="server"></asp:TextBox> </td> <td class="style4"> <asp:CompareValidator ID="CompareValidator1" runat="server" Display="Dynamic" ErrorMessage="????? ???? ?????? ?? ???? ??????" Operator="DataTypeCheck" Type="Date" ControlToValidate="dateOfBirth"></asp:CompareValidator> </td> </tr> <tr> <td class="style3"> &nbsp;</td> <td class="style2"> <asp:Button ID="SaveButton" runat="server" Text=" ????? ???????" Width="102px" style="margin-right: 15px; height: 26px;" /> </td> <td class="style4"> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ASPNETDBConnectionString1 %>" SelectCommand="SELECT aspnet_personalInformation.FirstName, aspnet_personalInformation.LastName, aspnet_personalInformation.StudentNumber, aspnet_personalInformation.DateOfBirth FROM aspnet_personalInformation INNER JOIN aspnet_Users ON aspnet_personalInformation.UserId = aspnet_Users.UserId WHERE aspnet_personalInformation.UserId=aspnet_Users.UserId ORDER BY aspnet_personalInformation.LastName" InsertCommand="INSERT INTO aspnet_PersonalInformation(UserId) SELECT UserId FROM aspnet_Profile"> </asp:SqlDataSource> </td> </tr> </table> i wanna save firstname lastname studentnumber and dateofbirth in aspnet_personalinformation table in database but before that, i fill one column of aspnet_personalinformation table named UserId by inserting sql command with aspnet_profile.userid now by running this code my table has still blankes protected void SaveButton_Click(object sender, EventArgs e) { string str= "Data Source=.\\SQLEXPRESS;AttachDbFilename=|DataDirectory|\\ASPNETDB.MDF;Integrated Security=True;User Instance=True"; SqlConnection con = new SqlConnection(str); con.Open(); string query = "INSERT INTO aspnet_PersonalInformation( FirstName, LastName,StudentNumber,DateOfBirth) VALUES ('" + this.FirstName.Text + "','" + this.LastName.Text + "','" + this.StudentNumber.Text + "','" + this.DateOfBirth.Text + "') where aspnet_PersonalInformation.UserId=aspnet_Profile.UserID"; SqlCommand cmd=new SqlCommand(query,con); cmd.ExecuteNonQuery(); con.Close(); } but it doesn't work help me plz

  Read the article

• Using MS Standalone profiler in VS2008 Professional

  - by fishdump

  I am trying to profile my .NET dll while running it from VS unit testing tools but I am having problems. I am using the standalone command-line profiler as VS2008 Professional does not come with an inbuilt profiler. I have an open CMD window and have run the following commands (I instrumented it earlier which is why vsinstr gave the warning that it did): C:\...\BusinessRules\obj\Debug>vsperfclrenv /samplegclife /tracegclife /globalsamplegclife /globaltracegclife Enabling VSPerf Sampling Attach Profiling. Allows to 'attaching' to managed applications. Current Profiling Environment variables are: COR_ENABLE_PROFILING=1 COR_PROFILER={0a56a683-003a-41a1-a0ac-0f94c4913c48} COR_LINE_PROFILING=1 COR_GC_PROFILING=2 C:\...\BusinessRules\obj\Debug>vsinstr BusinessRules.dll Microsoft (R) VSInstr Post-Link Instrumentation 9.0.30729 x86 Copyright (C) Microsoft Corp. All rights reserved. Error VSP1018 : VSInstr does not support processing binaries that are already instrumented. C:\...\BusinessRules\obj\Debug>vsperfcmd /start:trace /output:foo.vsp Microsoft (R) VSPerf Command Version 9.0.30729 x86 Copyright (C) Microsoft Corp. All rights reserved. C:\...\BusinessRules\obj\Debug> I then ran the unit tests that exercised the instrumented code. When the unit tests were complete, I did... C:\...\BusinessRules\obj\Debug>vsperfcmd /shutdown Microsoft (R) VSPerf Command Version 9.0.30729 x86 Copyright (C) Microsoft Corp. All rights reserved. Waiting for process 4836 ( C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\vstesthost.exe) to shutdown... It was clearly waiting for VS2008 to close so I closed it... Shutting down the Profile Monitor ------------------------------------------------------------ C:\...\BusinessRules\obj\Debug> All looking good, there was a 3.2mb foo.vsp file in the directory. I next did... C:\...\BusinessRules\obj\Debug>vsperfreport foo.vsp /summary:all Microsoft (R) VSPerf Report Generator, Version 9.0.0.0 Copyright (C) Microsoft Corporation. All rights reserved. VSP2340: Environment variables were not properly set during profiling run and managed symbols may not resolve. Please use vsperfclrenv before profiling. File opened Successfully opened the file. A report file, foo_Header.csv, has been generated. A report file, foo_MarksSummary.csv, has been generated. A report file, foo_ProcessSummary.csv, has been generated. A report file, foo_ThreadSummary.csv, has been generated. Analysis completed A report file, foo_FunctionSummary.csv, has been generated. A report file, foo_CallerCalleeSummary.csv, has been generated. A report file, foo_CallTreeSummary.csv, has been generated. A report file, foo_ModuleSummary.csv, has been generated. C:\...\BusinessRules\obj\Debug> Notice the warning about environment variables and using vsperfclrenv? But I had run it! Maybe I used the wrong switches? I don't know. Anyway, loading the csv files into Excel or using the perfconsole tool gives loads of useful info with useless symbol names: *** Loading commands from: C:\temp\PerfConsole\bin\commands\timebytype.dll *** Adding command: timebytype *** Loading commands from: C:\temp\PerfConsole\bin\commands\partition.dll *** Adding command: partition Welcome to PerfConsole 1.0 (for bugs please email: [email protected]), for help type: ?, for a quickstart type: ?? > load foo.vsp *** Couldn't match to either expected sampled or instrumented profile schema, defaulting to sampled *** Couldn't match to either expected sampled or instrumented profile schema, defaulting to sampled *** Profile loaded from 'foo.vsp' into @foo > > functions @foo >>>>> Function Name Exclusive Inclusive Function Name Module Name -------------------- -------------------- -------------- --------------- 900,798,600,000.00 % 900,798,600,000.00 % 0x0600003F 20397910 14,968,500,000.00 % 44,691,540,000.00 % 0x06000040 14736385 8,101,253,000.00 % 14,836,330,000.00 % 0x06000041 5491345 3,216,315,000.00 % 6,876,929,000.00 % 0x06000042 3924533 <snip> 71,449,430.00 % 71,449,430.00 % 0x0A000074 42572 52,914,200.00 % 52,914,200.00 % 0x0A000073 0 14,791.00 % 13,006,010.00 % 0x0A00007B 0 199,177.00 % 6,082,932.00 % 0x2B000001 5350072 2,420,116.00 % 2,420,116.00 % 0x0A00008A 0 836.00 % 451,888.00 % 0x0A000045 0 9,616.00 % 399,436.00 % 0x0A000039 0 18,202.00 % 298,223.00 % 0x06000046 1479900 I am so close to being able to find the bottlenecks, if only it will give me the function and module names instead of hex numbers! What am I doing wrong? --- Alistair.

  Read the article

• Can connect to Samba server but cannot access shares?

  - by jlego

  I have setup a stand-alone box running Fedora 16 to use as a file-sharing and web development server. Needs to be able to share files with a PC running Windows 7 and a Mac running OSX Snow Leopard. I've setup Samba using the Samba configuration GUI tool. Added users to Fedora and connected them as Samba users (which are the same as the Windows and Mac usernames and passwords). The workgroup name is the same as the Windows workgroup. Authentication is set to User. I've allowed Samba and Samba client through the firewall and set the ethernet to a trusted port in the firewall. Both the Windows and Mac machines can connect to the server and view the shares, however when trying to access the shares, Windows throws error 0x80070035 " Windows cannot access \SERVERNAME\ShareName." Windows user is not prompted for a username or password when accessing the server (found under "Network Places"). This also happens when connecting with the IP rather than the server name. The Mac can also connect to the server and see the shares but when choosing a share gives the error "The original item for ShareName cannot be found." When connecting via IP, the Mac user is prompted for username and password, which when authenticated gives a list of shares, however when choosing a share to connect to, the error is displayed and the user cannot access the share. Since both machines are acting similarly when trying to access the shares, I assume it is an issue with how Samba is configured. smb.conf: [global] workgroup = workgroup server string = Server log file = /var/log/samba/log.%m max log size = 50 security = user load printers = yes cups options = raw printcap name = lpstat printing = cups [homes] comment = Home Directories browseable = no writable = yes [printers] comment = All Printers path = /var/spool/samba browseable = yes printable = yes [FileServ] comment = FileShare path = /media/FileServ read only = no browseable = yes valid users = user1, user2 [webdev] comment = Web development path = /var/www/html/webdev read only = no browseable = yes valid users = user1 How do I get samba sharing working? UPDATE: Before this box I had another box with the same version of fedora installed (16) and samba working for these same computers. I started up the old machine and copied the smb.conf file from the old machine to the new one (editing the share definitions for the new shares of course) and I still get the same errors on both client machines. The only difference in environment is the hardware and the router. On the old machine the router received a dynamic public IP and assigned dynamic private IPs to each device on the network while the new machine is connected to a router that has a static public IP (still dynamic internal IPs though.) Could either one of these be affecting Samba? UPDATE 2: As the directory I am trying to share is actually an entire internal disk, I have tried to things: 1.) changing the owner of the mounted disk from root to my user (which is the same username as on the Windows machine) 2.) made a share that only included one of the folders on the disk instead of the entire disk with my user again as the owner. Both tests failed giving me the same errors regarding the network address. UPDATE 3: Not sure exactly what I did, but now whenever I try to connect to the share on the Windows 7 client I am prompted for my username and password. When I enter the correct credentials I get an access denied message. However I did notice that under the login box "domain: WINDOWS-PC-NAME" is listed. I believe this could very well be the problem. Any suggestions? UPDATE 4: So I've completely reinstalled Fedora and Samba now. I've created a share on the first harddrive (one fedora is installed on) and I can access that fine from Windows. However when I try to share any data on the second disk, I am receiving the same error. This I believe is the problem. I think I need to change some things in fstab or fdisk or something. UPDATE 5: So in fstab I mapped the drive to automount in a folder which works correctly. I also added the samba_share_t SElinux label to the mountpoint directory which now allows me to access the shares on the Windows machine, however I cannot see any of the files in the directory on the windows machine. (They are there, I can see them in the fedora file browser locally) UPDATE 6: Figured it out. See answer below

  Read the article

• Python RSS Feeder + Jquery RSS Reader

  - by Panther24

  I'm trying to implement an RSS Feeder in python using PyRSS2Gen and it created an XML file. Now in jQuery I'm using Google Ajax API's RSS reader and trying to read it. I get an error saying something is wrong. I'm unable to figure out the issue. I've checked some documentation but not able to get it. This is how my xml file looks: <rss version="2.0"> <channel> <title>Andrew's PyRSS2Gen feed</title> <link> http://www.dalkescientific.com/Python/PyRSS2Gen.html </link> <description> The latest news about PyRSS2Gen, a Python library for generating RSS2 feeds </description> <lastBuildDate>Fri, 26 Mar 2010 13:10:55 GMT</lastBuildDate> <generator>PyRSS2Gen-1.0.0</generator> <docs>http://blogs.law.harvard.edu/tech/rss</docs> <item> <title>PyRSS2Gen-0.0 released</title> <link> http://www.dalkescientific.com/news/030906-PyRSS2Gen.html </link> <description> Dalke Scientific today announced PyRSS2Gen-0.0, a library for generating RSS feeds for Python. </description> <guid isPermaLink="true"> http://www.dalkescientific.com/news/030906-PyRSS2Gen.html </guid> <pubDate>Sat, 06 Sep 2003 21:31:00 GMT</pubDate> </item> <item> <title>Thoughts on RSS feeds for bioinformatics</title> <link> http://www.dalkescientific.com/writings/diary/archive/2003/09/06/RSS.html </link> <description> One of the reasons I wrote PyRSS2Gen was to experiment with RSS for data collection in bioinformatics. Last year I came across... </description> <guid isPermaLink="true"> http://www.dalkescientific.com/writings/diary/archive/2003/09/06/RSS.html </guid> <pubDate>Sat, 06 Sep 2003 21:49:00 GMT</pubDate> </item> </channel> </rss> And my JS looks like this <!-- ++Begin Dynamic Feed Wizard Generated Code++ --> <!-- // Created with a Google AJAX Search and Feed Wizard // http://code.google.com/apis/ajaxsearch/wizards.html --> <!-- // The Following div element will end up holding the actual feed control. // You can place this anywhere on your page. --> <!-- Google Ajax Api --> <script src="../js/jsapi.js" type="text/javascript"></script> <!-- Dynamic Feed Control and Stylesheet --> <script src="../js/gfdynamicfeedcontrol.js" type="text/javascript"></script> <link rel="stylesheet" type="text/css" href="../css/gfdynamicfeedcontrol.css"> <script type="text/javascript"> function LoadDynamicFeedControl() { var feeds = [ {title: 'Demo', url: 'wcarss.xml' }]; var options = { stacked : false, horizontal : false, title : "" } new GFdynamicFeedControl(feeds, 'feed-control', options); } // Load the feeds API and set the onload callback. google.load('feeds', '1'); google.setOnLoadCallback(LoadDynamicFeedControl); </script> <!-- ++End Dynamic Feed Control Wizard Generated Code++ --> Can some help me and tell me what I'm doing wrong here? NOTE: Does the XML file have to be deployed? Cause currently its in my local machine and I'm trying to just call it.

  Read the article

• Trouble calculating correct decimal digits.

  - by Crath

  I am trying to create a program that will do some simple calculations, but am having trouble with the program not doing the correct math, or placing the decimal correctly, or something. Some other people I asked cannot figure it out either. Here is the code: http://pastie.org/887352 When you enter the following data: Weekly Wage: 500 Raise: 3 Years Employed: 8 It outputs the following data: Year Annual Salary 1 $26000.00 2 $26780.00 3 $27560.00 4 $28340.00 5 $29120.00 6 $29900.00 7 $30680.00 8 $31460.00 And it should be outputting: Year Annual Salary 1 $26000.00 2 $26780.00 3 $27583.40 4 $28410.90 5 $29263.23 6 $30141.13 7 $31045.36 8 $31976.72 Here is the full description of the task: 8.17 ( Pay Raise Calculator Application) Develop an application that computes the amount of money an employee makes each year over a user- specified number of years. Assume the employee receives a pay raise once every year. The user specifies in the application the initial weekly salary, the amount of the raise (in percent per year) and the number of years for which the amounts earned will be calculated. The application should run as shown in Fig. 8.22. in your text. (fig 8.22 is the output i posted above as what my program should be posting) Opening the template source code file. Open the PayRaise.cpp file in your text editor or IDE. Defining variables and prompting the user for input. To store the raise percentage and years of employment that the user inputs, define int variables rate and years, in main after line 12. Also define double variable wage to store the user’s annual wage. Then, insert statements that prompt the user for the raise percentage, years of employment and starting weekly wage. Store the values typed at the keyboard in the rate, years and wage variables, respectively. To find the annual wage, multiply the new wage by 52 (the number of weeks per year) and store the result in wage. Displaying a table header and formatting output. Use the left and setw stream manipulators to display a table header as shown in Fig. 8.22 in your text. The first column should be six characters wide. Then use the fixed and setprecision stream manipulators to format floating- point values with two positions to the left of the decimal point. Writing a for statement header. Insert a for statement. Before the first semicolon in the for statement header, define and initialize the variable counter to 1. Before the second semicolon, enter a loop- continuation condition that will cause the for statement to loop until counter has reached the number of years entered. After the second semicolon, enter the increment of counter so that the for statement executes once for each number of years. Calculating the pay raise. In the body of the for statement, display the value of counter in the first column and the value of wage in the second column. Then calculate the new weekly wage for the following year, and store the resulting value in the wage variable. To do this, add 1 to the percentage increase (be sure to divide the percentage by 100.0 ) and multiply the result by the current value in wage. Save, compile and run the application. Input a raise percentage and a number of years for the wage increase. View the results to ensure that the correct years are displayed and that the future wage results are correct. Close the Command Prompt window. We can not figure it out! Any help would be greatly appreciated, thanks!

  Read the article

• Optimizing MySQL for small VPS

  - by Chris M

  I'm trying to optimize my MySQL config for a verrry small VPS. The VPS is also running NGINX/PHP-FPM and Magento; all with a limit of 250MB of RAM. This is an output of MySQL Tuner... -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.1.41-3ubuntu12.8 [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: -Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in MyISAM tables: 1M (Tables: 14) [--] Data in InnoDB tables: 29M (Tables: 301) [--] Data in MEMORY tables: 1M (Tables: 17) [!!] Total fragmented tables: 301 -------- Security Recommendations ------------------------------------------- [OK] All database users have passwords assigned -------- Performance Metrics ------------------------------------------------- [--] Up for: 2d 11h 14m 58s (1M q [8.038 qps], 33K conn, TX: 2B, RX: 618M) [--] Reads / Writes: 83% / 17% [--] Total buffers: 122.0M global + 8.6M per thread (100 max threads) [!!] Maximum possible memory usage: 978.2M (404% of installed RAM) [OK] Slow queries: 0% (37/1M) [OK] Highest usage of available connections: 6% (6/100) [OK] Key buffer size / total MyISAM indexes: 32.0M/282.0K [OK] Key buffer hit rate: 99.7% (358K cached / 1K reads) [OK] Query cache efficiency: 83.4% (1M cached / 1M selects) [!!] Query cache prunes per day: 48301 [OK] Sorts requiring temporary tables: 0% (0 temp sorts / 144K sorts) [OK] Temporary tables created on disk: 13% (27K on disk / 203K total) [OK] Thread cache hit rate: 99% (6 created / 33K connections) [!!] Table cache hit rate: 0% (32 open / 51K opened) [OK] Open file limit used: 1% (20/1K) [OK] Table locks acquired immediately: 99% (1M immediate / 1M locks) [!!] InnoDB data size / buffer pool: 29.2M/8.0M -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance Reduce your overall MySQL memory footprint for system stability Enable the slow query log to troubleshoot bad queries Increase table_cache gradually to avoid file descriptor limits Variables to adjust: *** MySQL's maximum memory usage is dangerously high *** *** Add RAM before increasing MySQL buffer variables *** query_cache_size (> 64M) table_cache (> 32) innodb_buffer_pool_size (>= 29M) and this is the config. # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 32M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 sort_buffer_size = 4M read_buffer_size = 4M myisam_sort_buffer_size = 16M # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP max_connections = 100 table_cache = 32 tmp_table_size = 128M #thread_concurrency = 10 # # * Query Cache Configuration # #query_cache_limit = 1M query_cache_type = 1 query_cache_size = 64M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 log_error = /var/log/mysql/error.log # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ The site contains 1 wordpress site,so lots of MYISAM but mostly static content as its not changing all that often (A wordpress cache plugin deals with this). And the Magento Site which consists of a lot of InnoDB tables, some MyISAM and some INMEMORY. The "read" side seems to be running pretty well with a mass of optimizations I've used on Magento, the NGINX setup and PHP-FPM + XCACHE. I'd love to have a kick in the right direction with the MySQL config so I'm not blindly altering it based on the MySQLTuner without understanding what I'm changing. Thanks

  Read the article

• OSX 10.6 Cisco IPSEC strange behavior

  - by tair

  I'm trying to connect to Cisco IPSEC VPN of my company over DSL Internet. I managed to successfully connect using Cisco VPN Client, now I'm trying to switch to OSX 10.6 native client, because of licensing issues. The problems is that the connection fails with a dialog box containing the message: The negotiation with the VPN server failed. Verify the server address and try reconnecting. I checked logs: Jun 29 13:10:39 racoon[4551]: Connecting. Jun 29 13:10:39 racoon[4551]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 1). Jun 29 13:10:39 racoon[4551]: IKEv1 Phase1 AUTH: success. (Initiator, Aggressive-Mode Message 2). Jun 29 13:10:39 racoon[4551]: IKE Packet: receive success. (Initiator, Aggressive-Mode message 2). Jun 29 13:10:39 racoon[4551]: IKEv1 Phase1 Initiator: success. (Initiator, Aggressive-Mode). Jun 29 13:10:39 racoon[4551]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 3). Jun 29 13:10:42 racoon[4551]: IKE Packet: transmit success. (Mode-Config message). Jun 29 13:10:42 racoon[4551]: IKEv1 XAUTH: success. (XAUTH Status is OK). Jun 29 13:10:42 racoon[4551]: IKE Packet: transmit success. (Mode-Config message). Jun 29 13:10:42 racoon[4551]: IKEv1 Config: retransmited. (Mode-Config retransmit). Jun 29 13:10:42 racoon[4551]: IKE Packet: receive success. (MODE-Config). Jun 29 13:10:42 configd[19]: event_callback: Address added. previous interface setting (name: en1, address: 192.168.1.107), current interface setting (name: u92.168.54.147, subnet: 255.255.255.0, destination: 192.168.54.147). Jun 29 13:10:42 configd[19]: network configuration changed. Jun 29 13:10:42 vmnet-bridge[111]: Dynamic store changed Jun 29 13:10:42 named[62]: not listening on any interfaces Jun 29 13:10:58: --- last message repeated 1 time --- Jun 29 13:10:58 configd[19]: SCNCController: Disconnecting. (Connection tried to negotiate for, 16 seconds). Jun 29 13:10:58 racoon[4551]: IKE Packet: transmit success. (Information message). Jun 29 13:10:58 racoon[4551]: IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA). Jun 29 13:10:58 racoon[4551]: Disconnecting. (Connection tried to negotiate for, 19.113382 seconds). Jun 29 13:10:58 named[62]: not listening on any interfaces Jun 29 13:10:58 vmnet-bridge[111]: Dynamic store changed Jun 29 13:10:58 named[62]: not listening on any interfaces Jun 29 13:10:58 configd[19]: network configuration changed. Then I opened Terminal, started pinging a server behind VPN, and tried to connect again. Now connection is OK! Logs this time: Jun 29 13:46:53 racoon[8136]: Connecting. Jun 29 13:46:53 racoon[8136]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 1). Jun 29 13:46:53 racoon[8136]: IKEv1 Phase1 AUTH: success. (Initiator, Aggressive-Mode Message 2). Jun 29 13:46:53 racoon[8136]: IKE Packet: receive success. (Initiator, Aggressive-Mode message 2). Jun 29 13:46:53 racoon[8136]: IKEv1 Phase1 Initiator: success. (Initiator, Aggressive-Mode). Jun 29 13:46:53 racoon[8136]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 3). Jun 29 13:46:56 racoon[8136]: IKE Packet: transmit success. (Mode-Config message). Jun 29 13:46:56 racoon[8136]: IKEv1 XAUTH: success. (XAUTH Status is OK). Jun 29 13:46:56 racoon[8136]: IKE Packet: transmit success. (Mode-Config message). Jun 29 13:46:56 racoon[8136]: IKEv1 Config: retransmited. (Mode-Config retransmit). Jun 29 13:46:56 racoon[8136]: IKE Packet: receive success. (MODE-Config). Jun 29 13:46:56 configd[19]: event_callback: Address added. previous interface setting (name: en1, address: 192.168.1.107), current interface settinaddress: 192.168.54.149, subnet: 255.255.255.0, destination: 192.168.54.149). Jun 29 13:46:56 vmnet-bridge[111]: Dynamic store changed Jun 29 13:46:56 named[62]: not listening on any interfaces Jun 29 13:46:56 configd[19]: network configuration changed. Jun 29 13:46:56 named[62]: not listening on any interfaces Jun 29 13:46:56 racoon[8136]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). Jun 29 13:46:56 racoon[8136]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). Jun 29 13:46:56 racoon[8136]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). Jun 29 13:46:56 racoon[8136]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode). Jun 29 13:46:56 racoon[8136]: Connected. Jun 29 13:46:56 configd[19]: SCNCController: Connected. I tested it several times and it consistently behaves the same. What is the magic?

  Read the article

• OSX 10.6 Cisco IPSEC strange behavior

  - by tair

  I'm trying to connect to Cisco IPSEC VPN of my company over DSL Internet. I managed to successfully connect using Cisco VPN Client, now I'm trying to switch to OSX 10.6 native client, because of licensing issues. The problems is that the connection fails with a dialog box containing the message: The negotiation with the VPN server failed. Verify the server address and try reconnecting. I checked logs: Jun 29 13:10:39 racoon[4551]: Connecting. Jun 29 13:10:39 racoon[4551]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 1). Jun 29 13:10:39 racoon[4551]: IKEv1 Phase1 AUTH: success. (Initiator, Aggressive-Mode Message 2). Jun 29 13:10:39 racoon[4551]: IKE Packet: receive success. (Initiator, Aggressive-Mode message 2). Jun 29 13:10:39 racoon[4551]: IKEv1 Phase1 Initiator: success. (Initiator, Aggressive-Mode). Jun 29 13:10:39 racoon[4551]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 3). Jun 29 13:10:42 racoon[4551]: IKE Packet: transmit success. (Mode-Config message). Jun 29 13:10:42 racoon[4551]: IKEv1 XAUTH: success. (XAUTH Status is OK). Jun 29 13:10:42 racoon[4551]: IKE Packet: transmit success. (Mode-Config message). Jun 29 13:10:42 racoon[4551]: IKEv1 Config: retransmited. (Mode-Config retransmit). Jun 29 13:10:42 racoon[4551]: IKE Packet: receive success. (MODE-Config). Jun 29 13:10:42 configd[19]: event_callback: Address added. previous interface setting (name: en1, address: 192.168.1.107), current interface setting (name: u92.168.54.147, subnet: 255.255.255.0, destination: 192.168.54.147). Jun 29 13:10:42 configd[19]: network configuration changed. Jun 29 13:10:42 vmnet-bridge[111]: Dynamic store changed Jun 29 13:10:42 named[62]: not listening on any interfaces Jun 29 13:10:58: --- last message repeated 1 time --- Jun 29 13:10:58 configd[19]: SCNCController: Disconnecting. (Connection tried to negotiate for, 16 seconds). Jun 29 13:10:58 racoon[4551]: IKE Packet: transmit success. (Information message). Jun 29 13:10:58 racoon[4551]: IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA). Jun 29 13:10:58 racoon[4551]: Disconnecting. (Connection tried to negotiate for, 19.113382 seconds). Jun 29 13:10:58 named[62]: not listening on any interfaces Jun 29 13:10:58 vmnet-bridge[111]: Dynamic store changed Jun 29 13:10:58 named[62]: not listening on any interfaces Jun 29 13:10:58 configd[19]: network configuration changed. Then I opened Terminal, started pinging a server behind VPN, and tried to connect again. Now connection is OK! Logs this time: Jun 29 13:46:53 racoon[8136]: Connecting. Jun 29 13:46:53 racoon[8136]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 1). Jun 29 13:46:53 racoon[8136]: IKEv1 Phase1 AUTH: success. (Initiator, Aggressive-Mode Message 2). Jun 29 13:46:53 racoon[8136]: IKE Packet: receive success. (Initiator, Aggressive-Mode message 2). Jun 29 13:46:53 racoon[8136]: IKEv1 Phase1 Initiator: success. (Initiator, Aggressive-Mode). Jun 29 13:46:53 racoon[8136]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 3). Jun 29 13:46:56 racoon[8136]: IKE Packet: transmit success. (Mode-Config message). Jun 29 13:46:56 racoon[8136]: IKEv1 XAUTH: success. (XAUTH Status is OK). Jun 29 13:46:56 racoon[8136]: IKE Packet: transmit success. (Mode-Config message). Jun 29 13:46:56 racoon[8136]: IKEv1 Config: retransmited. (Mode-Config retransmit). Jun 29 13:46:56 racoon[8136]: IKE Packet: receive success. (MODE-Config). Jun 29 13:46:56 configd[19]: event_callback: Address added. previous interface setting (name: en1, address: 192.168.1.107), current interface settinaddress: 192.168.54.149, subnet: 255.255.255.0, destination: 192.168.54.149). Jun 29 13:46:56 vmnet-bridge[111]: Dynamic store changed Jun 29 13:46:56 named[62]: not listening on any interfaces Jun 29 13:46:56 configd[19]: network configuration changed. Jun 29 13:46:56 named[62]: not listening on any interfaces Jun 29 13:46:56 racoon[8136]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). Jun 29 13:46:56 racoon[8136]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). Jun 29 13:46:56 racoon[8136]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). Jun 29 13:46:56 racoon[8136]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode). Jun 29 13:46:56 racoon[8136]: Connected. Jun 29 13:46:56 configd[19]: SCNCController: Connected. I tested it several times and it consistently behaves the same. What is the magic?

  Read the article

• Modify MDT wizard to automate computer naming

  - by Jeramy

  I originally posted this question to StackOverflow, but upon further consideration it might be more appropriate here. Situation: I am imaging new systems using MDT Lite-Touch. I am trying to customize the wizard to automate the naming of new systems so that they include a prefix "AG-", a department code which is selected from a drop-down box in the wizard page (eg. "COMM"), and finally the serial number of the computer being imaged, so that my result in this case would be "AG-COMM-1234567890" Status: I have banged away at this for a while but my Google searches have not turned up answers, my trial-and-error is not producing useful error messages and I think I am missing some fundamentals of how to get variables from the wizard page into the variables used by the lite-touch wizard. Progress: I first created the HTML page which I will include below and added a script to the page to concatenate the pieces into a variable called OSDComputername which, for testing, I could output in a msgbox and get to display correctly. The problem with this is I don't know how to trigger the script then assign it to the OSDComputername variable that is used throughout the rest of the Light-Touch process. I changed the script to a function and added it to DeployWiz_Initization.vbs then used the Initialization field in WDS to call it. I'll include the function below. The problem with this is I would get "Undefined Variable" for OSDComputername and I am not sure it is pulling the data from the HTML correctly. I tried adding the scripting into the customsettings.ini file after the "OSDComputername=" This resulted in the wizard just outputting my code in text as the computer name. I am now trying adding variables to "Properties=" (eg.DepartmentName) in the customsettings.ini, pulling thier value from the HTML Form and setting that value to the variable in my function in DeployWiz_Initization.vbs and calling them after "OSDComputername=" in the fashion "OSDComputername="AG-" & %DepartmentName%" in customsettings.ini I am rebuilding right now and will see how this goes Any help would be appreciated. The HTML page: <HTML> <H1>Configure the computer name.</H1> <span style="width: 95%;"> <p>Please answer the following questions. Your answers will be used to formulate the computer's name and description.</p> <FORM NAME="TestForm"> <p>Departmental Prefix: <!-- <label class=ErrMsg id=DepartmentalPrefix_Err>* Required (MISSING)</label> --> <SELECT NAME="DepartmentalPrefix_Edit" class=WideEdit> <option value="AADC">AADC</option> <option value="AEM">AEM</option> <option value="AIP">AIP</option> <option value="COM">COM</option> <option value="DO">DO</option> <option value="DSOC">DSOC</option> <option value="EDU">EDU</option> <option value="EPE">EPE</option> <option value="ITN">ITN</option> <option value="LA">LA</option> <option value="OAP">OAP</option> <option value="SML">SML</option> </SELECT> </p> <p><span class="Larger">Client's Net<u class=larger>I</u>D:</span> <INPUT NAME="ClientNetID" TYPE="TEXT" ID="ClientNetID" SIZE="15"></p> <p>Building: <!-- <label class=ErrMsg id=Building_Err>* Required (MISSING)</label> --> <SELECT NAME="Building_Edit" class=WideEdit> <option value="Academic Surge Facility A">Academic Surge Facility A</option> <option value="Academic Surge Facility B">Academic Surge Facility B</option> <option value="Caldwell">Caldwell</option> <option value="Kennedy">Kennedy</option> <option value="Roberts">Roberts</option> <option value="Warren">Warren</option> </SELECT> </p> <p> <span class="Larger">Room <u class=larger>N</u>umber:</span> <input type=text id="RoomNumber" name=RoomNumber size=15 /> </p> </FORM> </span> </HTML> The Function: Function SetComputerName OSDComputerName = "AG-" & oEnvironment.Item("DepartmentalPrefix_Edit") ComputerDescription = oEnvironment.Item("DepartmentalPrefix_Edit") & ", " & oEnvironment.Item("ClientNetID") & ", " & oEnvironment.Item("RoomNumber") & " " & oEnvironment.Item("Building_Edit") End Function

  Read the article

• Thread Synchronisation 101

  - by taspeotis

  Previously I've written some very simple multithreaded code, and I've always been aware that at any time there could be a context switch right in the middle of what I'm doing, so I've always guarded access the shared variables through a CCriticalSection class that enters the critical section on construction and leaves it on destruction. I know this is fairly aggressive and I enter and leave critical sections quite frequently and sometimes egregiously (e.g. at the start of a function when I could put the CCriticalSection inside a tighter code block) but my code doesn't crash and it runs fast enough. At work my multithreaded code needs to be a tighter, only locking/synchronising at the lowest level needed. At work I was trying to debug some multithreaded code, and I came across this: EnterCriticalSection(&m_Crit4); m_bSomeVariable = true; LeaveCriticalSection(&m_Crit4); Now, m_bSomeVariable is a Win32 BOOL (not volatile), which as far as I know is defined to be an int, and on x86 reading and writing these values is a single instruction, and since context switches occur on an instruction boundary then there's no need for synchronising this operation with a critical section. I did some more research online to see whether this operation did not need synchronisation, and I came up with two scenarios it did: The CPU implements out of order execution or the second thread is running on a different core and the updated value is not written into RAM for the other core to see; and The int is not 4-byte aligned. I believe number 1 can be solved using the "volatile" keyword. In VS2005 and later the C++ compiler surrounds access to this variable using memory barriers, ensuring that the variable is always completely written/read to the main system memory before using it. Number 2 I cannot verify, I don't know why the byte alignment would make a difference. I don't know the x86 instruction set, but does mov need to be given a 4-byte aligned address? If not do you need to use a combination of instructions? That would introduce the problem. So... QUESTION 1: Does using the "volatile" keyword (implicity using memory barriers and hinting to the compiler not to optimise this code) absolve a programmer from the need to synchronise a 4-byte/8-byte on x86/x64 variable between read/write operations? QUESTION 2: Is there the explicit requirement that the variable be 4-byte/8-byte aligned? I did some more digging into our code and the variables defined in the class: class CExample { private: CRITICAL_SECTION m_Crit1; // Protects variable a CRITICAL_SECTION m_Crit2; // Protects variable b CRITICAL_SECTION m_Crit3; // Protects variable c CRITICAL_SECTION m_Crit4; // Protects variable d // ... }; Now, to me this seems excessive. I thought critical sections synchronised threads between a process, so if you've got one you can enter it and no other thread in that process can execute. There is no need for a critical section for each variable you want to protect, if you're in a critical section then nothing else can interrupt you. I think the only thing that can change the variables from outside a critical section is if the process shares a memory page with another process (can you do that?) and the other process starts to change the values. Mutexes would also help here, named mutexes are shared across processes, or only processes of the same name? QUESTION 3: Is my analysis of critical sections correct, and should this code be rewritten to use mutexes? I have had a look at other synchronisation objects (semaphores and spinlocks), are they better suited here? QUESTION 4: Where are critical sections/mutexes/semaphores/spinlocks best suited? That is, which synchronisation problem should they be applied to. Is there a vast performance penalty for choosing one over the other? And while we're on it, I read that spinlocks should not be used in a single-core multithreaded environment, only a multi-core multithreaded environment. So, QUESTION 5: Is this wrong, or if not, why is it right? Thanks in advance for any responses :)

  Read the article

• Paging, sorting and filtering in a stored procedure (SQL Server)

  - by Fruitbat

  I was looking at different ways of writing a stored procedure to return a "page" of data. This was for use with the asp ObjectDataSource, but it could be considered a more general problem. The requirement is to return a subset of the data based on the usual paging paremeters, startPageIndex and maximumRows, but also a sortBy parameter to allow the data to be sorted. Also there are some parameters passed in to filter the data on various conditions. One common way to do this seems to be something like this: [Method 1] ;WITH stuff AS ( SELECT CASE WHEN @SortBy = 'Name' THEN ROW_NUMBER() OVER (ORDER BY Name) WHEN @SortBy = 'Name DESC' THEN ROW_NUMBER() OVER (ORDER BY Name DESC) WHEN @SortBy = ... ELSE ROW_NUMBER() OVER (ORDER BY whatever) END AS Row, ., ., ., FROM Table1 INNER JOIN Table2 ... LEFT JOIN Table3 ... WHERE ... (lots of things to check) ) SELECT * FROM stuff WHERE (Row > @startRowIndex) AND (Row <= @startRowIndex + @maximumRows OR @maximumRows <= 0) ORDER BY Row One problem with this is that it doesn't give the total count and generally we need another stored procedure for that. This second stored procedure has to replicate the parameter list and the complex WHERE clause. Not nice. One solution is to append an extra column to the final select list, (SELECT COUNT(*) FROM stuff) AS TotalRows. This gives us the total but repeats it for every row in the result set, which is not ideal. [Method 2] An interesting alternative is given here (http://www.4guysfromrolla.com/articles/032206-1.aspx) using dynamic SQL. He reckons that the performance is better because the CASE statement in the first solution drags things down. Fair enough, and this solution makes it easy to get the totalRows and slap it into an output parameter. But I hate coding dynamic SQL. All that 'bit of SQL ' + STR(@parm1) +' bit more SQL' gubbins. [Method 3] The only way I can find to get what I want, without repeating code which would have to be synchronised, and keeping things reasonably readable is to go back to the "old way" of using a table variable: DECLARE @stuff TABLE (Row INT, ...) INSERT INTO @stuff SELECT CASE WHEN @SortBy = 'Name' THEN ROW_NUMBER() OVER (ORDER BY Name) WHEN @SortBy = 'Name DESC' THEN ROW_NUMBER() OVER (ORDER BY Name DESC) WHEN @SortBy = ... ELSE ROW_NUMBER() OVER (ORDER BY whatever) END AS Row, ., ., ., FROM Table1 INNER JOIN Table2 ... LEFT JOIN Table3 ... WHERE ... (lots of things to check) SELECT * FROM stuff WHERE (Row > @startRowIndex) AND (Row <= @startRowIndex + @maximumRows OR @maximumRows <= 0) ORDER BY Row (Or a similar method using an IDENTITY column on the table variable). Here I can just add a SELECT COUNT on the table variable to get the totalRows and put it into an output parameter. I did some tests and with a fairly simple version of the query (no sortBy and no filter), method 1 seems to come up on top (almost twice as quick as the other 2). Then I decided to test probably I needed the complexity and I needed the SQL to be in stored procedures. With this I get method 1 taking nearly twice as long as the other 2 methods. Which seems strange. Is there any good reason why I shouldn't spurn CTEs and stick with method 3? UPDATE - 15 March 2012 I tried adapting Method 1 to dump the page from the CTE into a temporary table so that I could extract the TotalRows and then select just the relevant columns for the resultset. This seemed to add significantly to the time (more than I expected). I should add that I'm running this on a laptop with SQL Server Express 2008 (all that I have available) but still the comparison should be valid. I looked again at the dynamic SQL method. It turns out I wasn't really doing it properly (just concatenating strings together). I set it up as in the documentation for sp_executesql (with a parameter description string and parameter list) and it's much more readable. Also this method runs fastest in my environment. Why that should be still baffles me, but I guess the answer is hinted at in Hogan's comment.

  Read the article

< Previous Page | 230 231 232 233 234 235 236 237 238 239 240 241  | Next Page >