Search Results

Search found 13082 results on 524 pages for 'ip camera'.

Page 235/524 | < Previous Page | 231 232 233 234 235 236 237 238 239 240 241 242  | Next Page >

• why this routing configuration does not work?

  - by avs099

  I have 2 VMs in HyperV role: first is RRAS - it has 2 interfaces (both manually configured, no DHCP): 192.168.1.110 - "external" one, connected to the router 192.168.10.2 - that's internal interface which other VMs will be using as well also I added VPN connection to our main server - and it gets 192.168.2.136 IP address in 192.168.2.XXX network. And IP route is create on the server as well for this interface. second VM is called KITCHENER. It only has 1 interface 192.168.10.99 / 255.255.255.0, with default gateway set to RRAS server - 192.168.10.2 QUESTION: how can I ping "main server" - 192.168.2.1 - from the KITCHENER server when RRAS server is connected to VPN? please see screenshots with ipconfig /all, route print and ping 192.168.2.1 commands. What needs to be done to get this working? all servers are Windows 2008 R2 if that matters.

  Read the article

• Windows 7 "Could not reconnect all network drives" on boot

  - by Thermionix

  Windows 7 won't reconnect to my network drives on startup. Once it is done booting opening Windows Explorer and clicking each share will mount them. Windows 7 Enterprise N Service Pack 1 I have attempted formatting the windows machine - first thing done to machine was to map the network drives, upon reboot they were disconnected. It is running on an Crucial M4 64gb SSD. The host of the network shares is a Ubuntu-Server machine connected through a gigabit switch. A modem provides dhcp, although both these machines have static IP's defined. It won't reconnect the drives regardless of whether they're SAMBA shares or NFS shares - therefore I believe it's an issue with the windows machine. Ubuntu 11.10 (GNU/Linux 3.0.0-12-server x86_64) I've tried using ip address instead of netbios name for mapping shares on the windows machine, Also tried setting EnableLinkedConnections=1 gpedit.msc Computer Configuration - Administrative Templates - System-Logon - always wait for the network at computer startup and logon = yes

  Read the article

• Windows VPN - NO internet access

  - by sharru

  I host a network of servers behind a Fortigate 200a firewall in the DC. I connect to those servers via a VPN connection. The problem is that when i connect to the VPN, I lose my internet connection on the local PC (windows 7). I would like to be connected to the VPN and still surf the web. i guess this means to only forward a range of ip to the VPN connection. I've read other answers on serverfault, talking about "un-check the 'Use default gateway on remote network' option in your Windows 7 PPTP network connection settings". When i do that , i get internet access but no access to the servers in the VPN. Any idea how to get both working? Should i change something on the fortigate 200a config? Do i need two networks cards? Is there a place in windows to define ip range for the vpn connection?

  Read the article

• Grant account write access to specific attributes on Active Directory User object

  - by Patricker

  I am trying to allow an account to update very specific attributes on all User objects. I am setting this security on the "User" object. When I add the account on the security tab, go to advanced, edit the accounts permissions, and start going through the list of attributes I am only able to find a few, like First Name, but most of the attributes I want to let them write to are missing. How can I grant the account write access to these attributes? Attributes I need to grant permission for: First Name (givenName) Last Name (sn) Initials (initials) Department (department) Company (company) Title (title) Manager (manager) Location Info (physicalDeliveryOfficeName, streetAddress, postOfficeBox) Work Phone (telephoneNumber) Pager (pager) IP Phone (ipPhone) IP Phone Other (otherIpPhone) ThumbnailLogo (thumbnailLogo) jpegPhoto (jpegPhoto) Description (displayName) Thanks

  Read the article

• How difficult will it be to switch DHCP from Windows 2000 to our network router?

  - by MetalSearGolid

  While I know a bit about networking, I am more of a programmer, and I have never set up a DHCP server. I have always allowed a router to assign IP addresses. However, my boss has asked me to switch out our old Win2k Domain Controller and DHCP server to a new server. The catch is that he wants to just use our router to assign IP addresses rather than have the new server do it. Is this going to be more than just disconnecting the old server? And if so, are there any documents or tips anyone can help me to make the transition a bit smoother? The new server will most likely have Windows Server 2008 R2. Any advice I can get on this matter would be greatly appreciated.

  Read the article

• Blocking non-virtual host access in Apache?

  - by cmbrnt

  I'm running an apache-server, with a bunch of virtual hosts for about seven domain names. Now I'd like to disallow access for clients who try to access my server using only its IP-adress. So: When someone accesses my website through www.domain.com, they reach the site hosted in /var/www/domain.com/public_html/. When someone enters the ip-address of the server they reach a 403 Forbidden-message. The problem with this is that they are theoretically able to reach my other sites through bruteforce, when getting http://11.22.33.44/domain.com/public_html/. I rather want them to reach a 403 Forbidden all the time, as long as they don't access my server by a valid domain name. How do I solve this problem?

  Read the article

• Airport Express configuration

  - by Christina

  We are trying to set up remote access to a computer that houses a server fro a particular program we are running. The program says we need to configure the office router. In the firewall settings it says to open ports 5345-5351 (TCP only). Port Forwarding: You will also need to forward the same range of ports (5345-5351) to the computer running the Server. This typically requires that the computer running the Server be assigned a static IP on the local network. Having trouble figuring out which IP address we actually need to be using on the client side of this program in order to access the server computer. Can someone walk through this process?? We are working on Mac OSX 10.5. Thank you in advance!

  Read the article

• How to configure Amazon Security Groups to achieve multi-tier architecture?

  - by ks78

  What is the preferred way to configure Amazon Security Groups to achieve a multi-tier architecture? Each of my instances has its own Security Group, which I only want to use for rules specific to an instance. I'd like to keep any rules which apply to multiple instances in a separate Security Group, which can then be assigned to instance Security Groups as necessary. As an example, I've setup a group called "admin", which allows administrative access from my IP. I added the "admin" group as the source to each of my instance security groups. However, I still can't access the instances from my IP without adding the rules directly to the instance's group. Am I missing something? Although it seems a multi-tier security architecture should be possible, it doesn't seem to be working.

  Read the article

• Do two portforward rules translate to "and"?

  - by blsub6

  I just set up an Exchange server to replace my DeskNow mail server. I want to start testing my internet mail exchange of my Exchange server. I can only set the MX records on my DNS up to my one external IP address so I was thinking that I could set up a firewall rule on my internet-facing firewall that port forwarded the smtp packets to two different servers. My question is: If I do that, will that mean that the smtp packets will be forwarded to just the first internal IP on the list? Or does it mean that the packet will be cloned and sent to both IPs?

  Read the article

• Windows 2008, 2 NICS, routing problem

  - by Srodriguez

  Dear all, I've some questions regarding basic routing, can't seem to relate to other questions posted in this site. My architecture: Windows 2008 server with 2 nics in the server. NIC1: IP 10.198.6.xxx, submask 255.255.252.0, gateway 10.198.4.xxx NIC2: IP 192.168.168.xxx, submask 255.255.255, no gateway defined both NICS are just connected to two separate switches, with other computers. I want to be able that all the requests that have a destination of 192.168.168.xxx are redirected to the NIC2, all the other to the NIC1. I know it's possible to do it with the route command, but normally we have to specify a gateway? (route ADD 192.168.168.0 MASK 255.255.255.0 ???) How can this be archived? Thanks a lot for your help!

  Read the article

• Mount linux partition as Windows network share over internet

  - by CptEO

  I have a Linux server running RHEL 6. I have two Windows servers. All servers are connected directly to the web with an external IP, they are not in a local lan. What I would like to achieve is to setup the Linux server so that it offers a single share (the whole partition) that can be mounted as network drive within Windows. I don't want to use any 3rd party software to access the linux server because I want to use the linux server as a backup for Bare Metal Restore. In order to do so, I need to be able to access the linux partition from within the Windows Recovery Enviroment where I cannot install any 3rd party software. The linux server should only be accessible from given IP addresses (e.g. the 2 windows servers). Does anyone know if the setup I would like to have is possible?

  Read the article

• Can I automatically add a new host to known_hosts ?

  - by gareth_bowles

  Here's my situation; I'm setting up a test harness that will, from a central client, launch a number of virtual machine instances and then execute commands on them via SSH. The virtual machines will have previously unused hostnames and IP addresses, so they won't be in the ~/.ssh/known_hosts file on the central client. The problem I'm having is that the first SSH command run against a new virtual instance always comes up with an interactive prompt: The authenticity of host '[hostname] ([IP address])' can't be established. RSA key fingerprint is [key fingerprint]. Are you sure you want to continue connecting (yes/no)? Is there a way that I can bypass this and get the new host to be already known to the client machine, maybe by using a public key that's already baked into the virtual machine image ? I'd really like to avoid having to use Expect or whatever to answer the interactive prompt if I can.

  Read the article

• Access VirtualBox-ed server from behind the router

  - by migajek

  I'm having the following configuration: Windows 7 hosting VirtualBox and it's guest: Ubuntu The machine (physical) which runs VirtualBox is behind the router and has the address of 192.168.0.110 VirtualBox runs the Bridged network, and the IP of VirtualBox-ed Ubuntu (eth0) is 192.168.0.200 Host (Win7) is running HTTP service on port 80, while guest (Ubuntu) is running it's service on port 9000 I can access both services from inside the network by typing the ip_address:port and this works fine. Both ports are forwarded on the router to their's respective IPs: 80 -> 192.168.0.110:80 9000 -> 192.168.0.200:9000 Unfortunately, accessing the router's external IP doesn't work as expected. While external_ip:80 works correctly, external_ip:9000 - doesn't I believe the problem is VBox - related, since the same network is running also other physical machine with Ubuntu and http service on 8000 and this one is forwarded correctly.

  Read the article

• ASP.NET MVC hosting recommendations

  - by chris

  I'm looking for recommendations for hosting an asp.net MVC application. Obviously, we need to be able to have access to configure IIS directly - I'd prefer not to have to go thru a control panel. The web server needs to have a dedicated IP, since some clients will be accessing it via IP. We need at least a SQLServer 2005 database, ideally on the same box. Load and usage will be pretty low, so a virtual machine will probably be fine. Does any one have any recommendations that meet the above constraints?

  Read the article

• Asterisk doesn't start properly at system startup. DNS lookup fails.

  - by leiflundgren

  When I start my Ubuntu system it attempts two DNS lookups. One to find out what my internet-routers external ip is. And one to find the IP of my PSTN-SIP-provider. Both fails. [Apr 7 22:14:54] WARNING[1675] chan_sip.c: Invalid address for externhost keyword: sip.mydomain.com ... [Apr 7 22:14:54] WARNING[1675] acl.c: Unable to lookup 'sip.myprovider.com' And since the DNS fails it cannot register properly a cannot make outgoing or incoming calls. If I later, after bootup, restart asterisk everything works excelent. Any idea how I should setup things so that either: Delay Asterisk startup so that DNS is up and healthy first. Somehow get Asterisk to re-try the DNS thing later. Regards Leif

  Read the article

• How to determine what program send the packet recorded in Wireshark?

  - by Tono Nam

  I was taking some tutorials on Wireshark in order to analyze the packets sent and received when talking to a web server for purposes of learning. When I start listening/recording packets in Wireshark, there where so many packages being recorded (700 packages per minute). Is it normal to have that much traffic if I have all the programs that will cause traffic such as all browsers, log me in, dropbox, goto meeting, etc., closed? In order to try to solve the problem I am analyzing random packets. Take for instance this filter: I just selected a random IP: 74.125.130.99. So how can I know from what program those packets where created? Also how can I get more info about that communication bwtween my computer (192.168.0.139) and that server (74.125.130.99)? I just selected a random IP from the Wireshark capture. There are also other IPs that I have no idea why they are communicating with my computer. How can I figure that out?

  Read the article

• How to port forward https traffic via ssh and/or remote desktop to through several networks and PCs?

  - by donttellya

  I have the following environment: In company X I develop a application on a pc A in network A with ip address 192.168.100.50 which has to do an https request to an http server located in the intranet of company Y In company X is another pc B in network B with ip address 192.168.200.100 pc B (of company X) can access the intranet from company Y via ssh tunnel (putty) pc A (of company X) can ping pc B (of company X) note: pc A can also do a remote desktop connection to pc B) pc B can ping the http sever pc A can not ping the http server How can the https request from pc A of company X get to the http server of company Y? On which pc must be putty configured? And which settings for host, port forwarding etc. has to be done in putty? So finally the https request should go from PC A - PC B - Http Server in company Y.

  Read the article

• Server problem (duh)

  - by j-t-s

  Sorry the title couldn't be more specific. I installed Abyss Web Server. I'm running Windows XP Home Edition and I have Wireless Mobile Broadband internet. I used to be able to access (and other people on other networks) my site by entering my ip address in the browser, but after I formatted, and the installed abyss web server again, this does not work anymore. There are no errors. I CAN visit my own site by entering my ip address BUT anybody else can't do the same, it just says "connecting" in the browser's statusbar and it never changes. I have consulted the docs and have found no help. Google hasn't helped with this problem either. Can somebody please help? Thank you :)

  Read the article

• Server problem (duh)

  - by j-t-s

  Sorry the title couldn't be more specific. I installed Abyss Web Server. I'm running Windows XP Home Edition and I have Wireless Mobile Broadband internet. I used to be able to access (and other people on other networks) my site by entering my ip address in the browser, but after I formatted, and the installed abyss web server again, this does not work anymore. There are no errors. I CAN visit my own site by entering my ip address BUT anybody else can't do the same, it just says "connecting" in the browser's statusbar and it never changes. I have consulted the docs and have found no help. Google hasn't helped with this problem either. Can somebody please help? Thank you :)

  Read the article

• Is it safe to use a single switch for multiple subnets?

  - by George Bailey

  For a moment, forget about whether the following is typical or easy to explain, is it safe and sound? Internet | ISP supplied router x.x.x.1 (public subnet) | switch-------------------------------------+ | (public subnet) | (public subnet) BVI router (switch with an access list) NAT router | (public subnet) | (private subnet 192.168.50.1) +--------------------------------switch----+ (both subnets) | | computer with IP 192.168.50.2 ------+ +----computer with IP x.x.x.2 I don't plan to implement this setup, but I am curious about it. The 50.2 computer may send a packet to the x.2 computer, but it will use 50.1 as the router, since 50.2 knows that the subnet is different. Would this result in the packet being received twice by the x.2 machine, first directly through the switch, second by way of the two routers? Do you see any problems with this aside from how confusing it is, and that it would put one switch doing the work of two subnets?

  Read the article

• How to detect device type from device connected to router?

  - by molly

  I have a att router and there is an unknown device connected to my network. I can't seem to kick it off because of how att's router settings are created which is kind of dumb. I am able to see its local ip and mac address. I am on a mac with snow leopard. How can I get more information on the device with the information that I have? I want to see what kind of device it is, I have checked all devices that are connected to the router and none seem to match the local ip that is connected. I have WPA encryption setup with a strong password.

  Read the article

• vmware workstation - virtual network adapters missing from ipconfig, still show in networking (XP host)

  - by Adam

  Hi Folks - here's a new one for me, and my first time posting here: I installed VMWare workstation 7.1 on a new PC. VMWare properly installs the virtual network adapters under the Network Connections control panel, however for some reason they do not show up under ipconfig, which is very weird. They also don't appear anywhere in "route print". I don't have network connectivity to the VM. My guesses are perhaps some conflict with Symantec AntiVirus or Symantec Client Firewall. Tried the following things: enabling TCP/IP in the virtual network adapters (they often get installed with it disabled for some reason) Restoring defualts in the VMnetcfg gui tool (this causes an uninstall and reinstall of the virtual network adapters on the host) Re-installing vmware workstation Uninstalling checkpoint secureremote and then reinstalling vmware Just to be clear, this problem is totally on the host. In my searching for stuff about (non-vmware) adapters missing from ipconfig, I see some posts about resetting the TCP/IP stack using netsh. Looking into that next... Thanks!

  Read the article

• Apache Virtual Host Configuration

  - by Carl

  I have been searching the internet for an hour now, and I was hoping for a quick hint here so that I could solve my problem a wee bit faster. My virtual server is so far only accessible through an IP address, no DNS entry yet, and so far none needed either. The problem I have is with Apache2, the virtual hosts are puzzling me. What I need is: Access to my project (based on Symfony2) from the outside with the IP address Access to my project from localhost What I have got: Access from the outside results in rendering the websites in /var/www/vhosts/htdocs/default, while from the inside results in rendering the websites in /var/www. Why the difference? What is a recommended configuration for my use case?

  Read the article

• I want to start my portfolio site using ASP.Net and I'm a bit lost about hwo to actually put it on t

  - by Papuccino1

  I found this site: www.discountasp.net They seem cheap enough and have a track record. I decided to host my site with them. Here's where I'm confused. I host the application (my website) with them and they give me an IP address, right? Users can visit my site by typing in that IP address right? (Of course once I move the index file and create a defauly web folder, etc.) Next step is buying a domain name right? Like www.mysite.com, right? Is this the way it's done, or am I doing it wrong?

  Read the article

• Laptops trying to connect via wireless? Only able to connect only via wired connection

  - by Chris J. Lee

  It seems that all the wireless laptops in the office have disconnected and are unable to reconnect to the wifi after a terrible storm caused some power interruptions. Troubleshooting actions Verify wireless broadcasting is up With each laptop i ended up flushing their dns cache on Win 7 (ipconfig /flush ) Performed an ipconfig /all to see what the new ip is Made sure password was correct Reset the router (multiple times) restarted each laptop. Tried connecting wirelessly Am i missing some small detail ? Network information The router is a linksys/cisco WRVS4400N router. Supports a lot of fancy features i don't know how to use. We have 3 static ip's the conference room computer, the wireless printer, my computer Mostly windows machines, we have 3 mac users

  Read the article

< Previous Page | 231 232 233 234 235 236 237 238 239 240 241 242  | Next Page >