Search Results

Search found 13082 results on 524 pages for 'ip camera'.

Page 236/524 | < Previous Page | 232 233 234 235 236 237 238 239 240 241 242 243  | Next Page >

• Superscope DHCP leases and configuration set up

  - by Vdub

  Hello I wanted to see if someone could help with a network problem I am having. Right now we have a super-scope and scopes of 192.168.50.1 and 192.168.51.1, as of now both are activated but only 192.168.50.1 is handing our leases, 192.168.51 wont. here is a summary of our network Gateway: watchguard firebox x750e for our router/gateway at 192.168.50.1 I set up as a secondary IP address 192.168.51.1 Server: Server 2008 r2 standard, running our DNS @ 192.168.50.242 and 8.8.8.8 as a secondary, AD, and DHCP. On that NIC card i have 192.168.50.242 as the IP address and 192.168.51.242 as a secondary. 192.168.50.1 as the default gateway and 192.168.51.1 as a secondary. Im am not very knowledgeable at this but as far as i have researched after adding a super scope and activating scopes, they should automatically start handing out addresses and I cant figure out why only one does. any help at all would be appreciated.

  Read the article

• Laptops trying to connect via wireless? Only able to connect only via wired connection

  - by Chris J. Lee

  It seems that all the wireless laptops in the office have disconnected and are unable to reconnect to the wifi after a terrible storm caused some power interruptions. Troubleshooting actions Verify wireless broadcasting is up With each laptop i ended up flushing their dns cache on Win 7 (ipconfig /flush ) Performed an ipconfig /all to see what the new ip is Made sure password was correct Reset the router (multiple times) restarted each laptop. Tried connecting wirelessly Am i missing some small detail ? Network information The router is a linksys/cisco WRVS4400N router. Supports a lot of fancy features i don't know how to use. We have 3 static ip's the conference room computer, the wireless printer, my computer Mostly windows machines, we have 3 mac users

  Read the article

• MMS gets hostname from uname and can't connect to it

  - by Adam Monsen

  I'm trying to get 10gen's MongoDB Monitoring Service monitoring my 3-node replica set. The replica set running in an AWS VPC. Each node runs on a different [virtual] machine. Assume their IPs are 192.168.1.1 (primary or secondary), 192.168.1.2 (primary or secondary), 192.168.1.3 (arbiter). From a quick look at the source, MMS appears to get the hostname of the machine it is running on like so: platform.uname()[1] For my VPC EC2 instance, this returns something like ip-192-168-1-1 MMS then tries to connect to this hostname, which does not resolve. I'd rather just use IP addresses (since they're always static), but it seems like the hardcoded use of platform.uname()[1] in mmsAgent.py precludes that. So, what's an elegant way out of this? Hack /etc/hosts? I'm not setting up a DNS server just for this. Maybe I'm just misunderstanding how to configure MMS.

  Read the article

• netmask: command not found

  - by Ian R.

  I purchased a new server with a few ip's so I modified the /etc/network/interfaces file recently so that my ip's can go live. While editing that file I created a backup and deleted the original file. I recreated the interfaces file using the touch command and gave +x permissions but now, when trying to restart the interface (/etc/network/interfaces restart) I get all sorts of errors: /etc/network/interfaces: line 10: iface: command not found /etc/network/interfaces: line 11: address: command not found /etc/network/interfaces: line 12: netmask: command not found /etc/network/interfaces: line 13: auto: command not found Can any1 point what I forgot to do? Thanks.

  Read the article

• Configuring Linux Network

  - by Reiler

  Hi I'm working on some software, that runs on a Centos 5.xx installation. I'ts not allowed for our customers to log in to Linux, everything is done from Windows applications, developed by us. So we have build a frontend for the user to configure network setup: Static/DHCP, ip-address, gateway, DNS, Hostname. Right now I let the user enter the information in the Windows app, and then write it on the Linux server like this: Write to /etc/resolv.conf: Nameserver Write to /etc/sysconfig/network: Gateway and Hostname Write to /etc/sysconfig/network-scripts/ifcfg-eth0: Ipaddress, Netmask, Bootproto(DHCP or Static) I also (after some time) found out that I was unable to send mail, unless I wrote in /etc/hosts: 127.0.0.1 Hostname All this seems to work, but is there a better/easier way to do this? Also, I read the network configuration nearly the same way, but if I use DHCP, I miss som information, for instance the Ip-address. I know that I can get some information from the commandline (ifconfig), but I dont get for instance Hostname, Gateway and DNS. Is there a commandline tool that will display this?

  Read the article

• tcp handshake failed.client send rst (after syn-ack). can any one advice?

  - by user1495181

  architecture: 2 linux computer connected . on the second (192.168.1.1) one run apache server . I have a small program that take tcp packets from nfqueue change the dst ip to 192.168.1.1 in case that the dst ip is 192.168.1.2 (i know that i can do it with iptables , but my program will do more things in the future), fix check sum and return to the queue. if i call to telnet 192.168.1.1 , means that my program dosnt need to do any manipulation, handshake is OK. If i call to telnet 192.168.1.2 , my program change the dest. server get the syn and return syn-ack, but right after getting the syn-ack the client send rst. Can anyone advice? wireshark of the telnet tcpdump of the telenet above

  Read the article

• 10 System LAN latency with ADSL modem as gateway

  - by itsoft3g

  Recently I expanded LAN in my office from 3 to 10 computers. Structure star topology, one ADSL Modem connected to One Switch which is again connected to 10 computers. Also we have Wifi device Netgear which is connected from switch. ADSL Modem acts as the DHCP Server, all the system will have default gateway IP (ADSL Modem's IP) Network latency is now become very high, All the chat severs disconnect often like google talk, skype etc, also internet become very very slow. when all the computer turned on. We have 4 Mbps Download and 100 Kbps upload Net speed. Its look like ADSL Modem cannot able to handle all the connections. I tried to setup a system as default gateway which will connect to modem, not sure how to do this. Please advice on this.

  Read the article

• Web Development - How to access custom host, defined in my hosts file, from another device in the same network

  - by Neara

  Ok, I hope i'll be able to explain the issue im experiencing. I'm working on a project, that has 2 parts: one takes all requests from usual localhost, the other handles requests from myhost.local. While trying to access both addresses from my computer, it works ok. But now i need to test myhost.local on mobile devices, connected to the same network. Usually i would just run server from my computer ip in the network: python manage.py runserver 10.0.0.8:8000 And then from any device, going to 10.0.0.8:8000 would show the project im working on. However, now accessing that ip address routes me straight to localhost. So, my question is how to access myhost.local from another device in same network? I don't want to change router settings, if that can be avoided, cos sometimes i work from places where i can't access router admin. Is there any network settings on my computer, that i can change to fix the routing to myhost.local w.o losing access to localhost as well?

  Read the article

• exim4: multiple domains/IPs

  - by ButterdBread

  On my VPS I have 3 IPs which all have their own domain and their own reverse-DNS records. I have a website on each domain, sending emails. The problem is: the emails are rejected by many hosts because the reverse dns doesn't fit the host in the helo. All the emails are sent from the primary IP and therefore only one of the three domains work. I am looking for a way for exim to check which email adress i'm using to send the email and adapt the domain/IP transmitted in the helo. I have already tried many configurations but nothing has worked up to now. Simply changing MX-Records is impossible too, as I recieve (and also send) email via gmail and I don't want to set up my own webmail. Does anyone know a solution?

  Read the article

• ubuntu server in a vm, can't connect to internet

  - by jessh

  I'm attemtping to host my own development web server in a virtual box guest, Ubuntu Server. I would like this virtual machine to be accessible from not only my home network, but outside the LAN as well. As such, I've set up a static IP (so I can later forward ports to this static IP.) My virtual box settings have this vm only using one adapter -- in bridged mode. Here's what my /etc/network/interfaces looks like: iface eth0 inet static address 10.0.1.203 /*this is outside the DHCP range*/ netmask 255.255.255.0 gateway 10.0.1.1 network 10.0.1.0 broadcast 10.0.1.255 dns-nameservers: 8.8.8.8 8.8.8.4 Here's what the output of ifconfig looks like: https://dl.dropbox.com/u/2241201/locker/ubuntu.png My Host is a mac mini, running OS X 10.7. From within the guest, if I ping google.com: $ ping google.com # outputs 'ping: unknown host google.com' immediately Why am I unable to access the web?

  Read the article

• How to block/redirect hosts and subdomains of a host using htaccess?

  - by Sven

  I want to block several host-domains and their subdomains, as well as IP-Adresses using htaccess. So far I added to my .htaccess-file: # block doamins and all subdomains Deny from .example.org # block domainrange: 1.2.3.[1-255] Deny from 1.2.3. # Block single IP Deny from 2.3.4.5 but still I had problems with spam from e.g. server1.example.org. What is wrong with my script? Is it also possible to redirect all requests from certain hosts/IPs to a document (say: info.html)?

  Read the article

• Mac OS X 10.6.5 and link-local addresses (169.254.x.x)

  - by WMR

  Starting with the latest update of Mac OS X (10.6.5) all Apple applications (Safari, Mail, iChat, etc.) don't connect to the internet anymore, if the assigned IP address is from the 169.254.0.0./16 range. This is not a routing problem, I can still ping any server I want, even connecting via command line tools works. I know this problem could easily be fixed by changing the IP address to a more common RFC1918 address (e.g. 192.168.0.0./16), but this is what the ISP assigns via DHCP and I am not sure I can convince them (Xplornet) to change that. So I am wondering if there's a (hidden?) setting that would convince Apple applications, that they are in fact still online.

  Read the article

• Setting up the metasploitable in virtualbox

  - by SetSlapShot

  I'm supposed to try and use kali to do exploits on metasploitable, but I'll burn that bridge when I get there. My question right now is: How do I set up a host only network on virtualbox? I heard that it was unsafe to run metasploitable in bridged networking mode, that host only or NAT is better. When I run metasploitable on NAT, the kali box (attacker) has the same ip address as the metasploitable box, and nmap doesn't really return anything except what I can only assume would be a scan of its own ports? I tried to create a host only network in virtual box. I left the adapter settings at the default, and unchecked DHCP server. now when I run ifconfig on the metasploitable box, there is no ip address listed. Am I setting up/connecting to/not configuring the host only network correctly?

  Read the article

• DNS no longer works after server reboot

  - by Burning the Codeigniter

  Strangely enough, when I reboot my Ubuntu 12.04 server, the DNS no longer works, which makes the domain unavailable to access to my site. Normally the DNS should be working after a reboot, but this doesn't happen anymore. I use nginx to serve content, but nginx is already configured to work with my domains. What are the typical practises must I do after a reboot and how can I solve this issue I experience? I already have BIND, networking and resolvconf to boot when the server boots up. ; <<>> DiG 9.8.1-P1 <<>> mysite.com ;; global options: +cmd ;; connection timed out; no servers could be reached This is my output with dig $ttl 38400 mysite.com. IN SOA ns1.mysite.com. webmaster.mysite.com. ( 1055026205 6H 1H 5D 20M ) mysite.com. IN A xx.xx.xx.xx # Server IP *.mysite.com. IN A xx.xx.xx.xx # Server IP www.mysite.com. IN CNAME mysite.com. ns1.mysite.com. IN A xx.xx.xx.xx # Server 2nd IP ns2.mysite.com. IN A xx.xx.xx.xx # Server 3rd IP mysite.com. IN NS ns1.mysite.com. mysite.com. IN NS ns2.mysite.com. mail.mysite.com. IN MX 1 mysite.com. This is the contents of /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 85.17.150.123 nameserver 85.17.96.69 nameserver 62.212.64.122 search localdomain After using more dig commands, outputs: ; <<>> DiG 9.7.3-P3 <<>> @85.17.150.123 mysite.com ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: REFUSED, id: 24847 ;; flags: qr rd; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; WARNING: recursion requested but not available ;; QUESTION SECTION: ;mysite.com. IN A ;; Query time: 2145 msec ;; SERVER: 85.17.150.123#53(85.17.150.123) ;; WHEN: Mon Nov 5 16:31:32 2012 ;; MSG SIZE rcvd: 30 ; <<>> DiG 9.7.3-P3 <<>> @85.17.96.69 mysite.com ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: REFUSED, id: 27879 ;; flags: qr rd; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; WARNING: recursion requested but not available ;; QUESTION SECTION: ;mysite.com. IN A ;; Query time: 949 msec ;; SERVER: 85.17.96.69#53(85.17.96.69) ;; WHEN: Mon Nov 5 16:32:59 2012 ;; MSG SIZE rcvd: 30 ; <<>> DiG 9.7.3-P3 <<>> @62.212.64.122 mysite.com ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: REFUSED, id: 29293 ;; flags: qr rd; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; WARNING: recursion requested but not available ;; QUESTION SECTION: ;mysite.com. IN A ;; Query time: 825 msec ;; SERVER: 62.212.64.122#53(62.212.64.122) ;; WHEN: Mon Nov 5 16:33:39 2012 ;; MSG SIZE rcvd: 30 With Google DNS (8.8.8.8): ; <<>> DiG 9.7.3-P3 <<>> @8.8.8.8 mysite.com ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 38498 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;mysite.com. IN A ;; Query time: 3982 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Mon Nov 5 16:37:27 2012 ;; MSG SIZE rcvd: 30

  Read the article

• Working with a copy of my Virtual Machine

  - by Gaby Reyna

  Hi there I'm trying to make a backup/copy of my virtual machine, it's installed in a Windows Server 2000 and I want to make some modifications/tests without changing the original one. The copy is to be used in Windows 7, what I'm trying to do is work/modify an application that communicates with a DB, this application is hosted on the VM, the DB too, and since I don't want to screw up the stable version I want to know how to copy the VM to my desktop pc to experiment without worries. Now, someone told me I might have problems with the IP 'cause the original will have the same IP, and if I change it, it won't work properly. Is this true? If it is indeed true, any suggestions??

  Read the article

• Active Directory: trouble adding new DC

  - by ethrbunny

  I have a domain with 3 DCs. One is starting to fail so I brought up a new one. All are running Win 2003. Problem: there appear to be replication issues between the 4 machines but I can't figure out what's causing this. All are registered with the DNS as identically as I can make them. How do I know there is a problem? Nagios is telling me that the other 3 DCs are having KCCEvent errors and the new machine is reporting "failed connectivity" errors. Doing dcdiag on the new machine reports: the host could not be resolved to an IP address. This seems crazy as I log into it using the DNS name. I can ping it from the other three machines using this DNS name as well. repadmin /showreps from the new machine says its seeing the other 3 machines. Doing the same from one of the older machines doesn't show the new machine. I've tried netdiag /repair numerous times. No luck. There are no firewalls running on any of the machines. If I look at Domain info via MMC (on the new machine) it appears that all the information is current. Users, computers, DCs.. its all there. Im puzzled as to what step(s) I've missed in adding this new machine. Suggestions? EDIT: dcdiag from non-working: C:\Documents and Settings\Administrator.BME>dcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\YELLOW Starting test: Connectivity The host 312ce6ea-7909-4e15-aff6-45c3d1d9a0d9._msdcs.server.edu could not be resolved to an IP address. Check the DNS server, DHCP, server name, etc Although the Guid DNS name (312ce6ea-7909-4e15-aff6-45c3d1d9a0d9._msdcs.server.edu) couldn't be resolved, the server name (yellow.server.edu) resolved to the IP address (10.127.24.79) and was pingable. Check that the IP address is registered correctly with the DNS server. ......................... YELLOW failed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\YELLOW Skipping all tests, because server YELLOW is not responding to directory service requests Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : bme Starting test: CrossRefValidation ......................... bme passed test CrossRefValidation Starting test: CheckSDRefDom ......................... bme passed test CheckSDRefDom Running enterprise tests on : server.edu Starting test: Intersite ......................... server.edu passed test Intersite Starting test: FsmoCheck ......................... server.edu passed test FsmoCheck dcdiag from working: P:\>dcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\AD1 Starting test: Connectivity ......................... AD1 passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\AD1 Starting test: Replications ......................... AD1 passed test Replications Starting test: NCSecDesc ......................... AD1 passed test NCSecDesc Starting test: NetLogons ......................... AD1 passed test NetLogons Starting test: Advertising ......................... AD1 passed test Advertising Starting test: KnowsOfRoleHolders ......................... AD1 passed test KnowsOfRoleHolders Starting test: RidManager ......................... AD1 passed test RidManager Starting test: MachineAccount ......................... AD1 passed test MachineAccount Starting test: Services ......................... AD1 passed test Services Starting test: ObjectsReplicated ......................... AD1 passed test ObjectsReplicated Starting test: frssysvol ......................... AD1 passed test frssysvol Starting test: frsevent ......................... AD1 passed test frsevent Starting test: kccevent ......................... AD1 passed test kccevent Starting test: systemlog ......................... AD1 passed test systemlog Starting test: VerifyReferences ......................... AD1 passed test VerifyReferences Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : bme Starting test: CrossRefValidation ......................... bme passed test CrossRefValidation Starting test: CheckSDRefDom ......................... bme passed test CheckSDRefDom Running enterprise tests on : server.edu Starting test: Intersite ......................... server.edu passed test Intersite Starting test: FsmoCheck ......................... server.edu passed test FsmoCheck P:\>

  Read the article

• understanding my site's DNS records

  - by DaveM

  firstly apologies for using the word 'pointage' this is the word my french domain registrar uses so I may have used to wrong term. OK I would like to better understand what is going on on my 'pointage' record on my domain registrars site. for my (currently empty) web site it reports the following details... Type : Host : Destination A : www.mydomain.org : 62.210.176.146 A : mail.mydomain.org : 84.246.225.176 Mx : .mydomain.org : mail.mydomain.org I think I understand the MX record, that simply relays anything onto the mail.mydomain.org location. However why are the destination for the www and mail domains different. Even more confusing (for me) is the fact that if I ping either of www.mydomain.org or mail.mydomain.org the ping returns a different IP address. This IP address is consistent with that of my server (ie 92.39.247.92). So what exactly is going on ? I'm sure I could find the information on the web,I've read a few thing on the debianhelp site regarding DNS records, and it seems to suggest that the record should be a reverse lookup, but certains isn't the reverse of my servers IP ? but I don't what I should be looking for, so links to docs and search terms for google will be happily accepteed (even though they go against the grain of SO answers to question). thanks in advance. David. ps. I should add that everything seems to work just fine, and I've just descovered this part of the management page of my registrar. Edit: Addition of DNS records and ping results. The DNS record for the site. From what I've read there should only realy be a single 'A' record, so has something gone wrong ? should I change it (remove the extras and then just point www.facilitee.org - .facilitee.org and mail.facilitee.org - .facilitee.org here is the DNS record A www.facilitee.org ? 92.39.247.92 A .facilitee.org ? 92.39.247.92 A mail.facilitee.org ? 92.39.247.92 A webmail.facilitee.org ? 92.39.247.92 MX .facilitee.org ? mail.facilitee.org ping results... ~$ ping www.facilitee.org PING www.facilitee.org (92.39.247.92) 56(84) bytes of data. 64 bytes from vps4576-cloud.dns26.com (92.39.247.92): ~$ ping mail.facilitee.org PING mail.facilitee.org (92.39.247.92) 56(84) bytes of data. 64 bytes from vps4576-cloud.dns26.com (92.39.247.92): So the DNS and the ping correspond, but the 'pointage' doesn't. ~ how can I get a report of the pointage records other than from my registrar ?

  Read the article

• Port Forwarding for Remote Desktop

  - by Vaibhav Bajpai

  I have two Mac notebooks at home, I have assigned them static private IPs. I have also set my router to a DynDNS address, which updates everytime my router gets a new public IP. I have enabled Screen Sharing on both notebooks. I can successfully goto my router webpage using the DynDNS address. I understand I need to port-forward to get Screen Sharing to work from outside. Lets assume, notebooks have private IP 192.168.1.2 and 192.168.1.3 I am kind of lost here, would appreciate some help (I need to be able remote desktop to both notebooks)

  Read the article

• Wamp virtualhost with supporting of remote access

  - by Farid

  To cut the long story short, I've setup a Wamp server with local virtual host for domain like sample.dev, now I've bind my static IP and port 80 to my Apache and asked the client to make some changes in his hosts file and add x.x.x.x sample.dev , I've also configured my httpd virtual host like this : <VirtualHost *:80> ServerAlias sample.dev DocumentRoot 'webroot_directory' </VirtualHost> Client can reach to my web server using the direct access by ip address, but when he tries using the sample domain looks like he gets in to some infinite loop. The firewall is off too. What would be the problem?! Thanks.

  Read the article

• cannot access my own computer through My Network Places

  - by WebMAOhist

  My home Windows XP Pro SP3 machine is DHCP client receiving configurations from ISP. Trying to access in WindowsExplorer -My Network Places - Microsoft Windows Network shows Workgroup with a delay of 3 min and then popups messagebox: Microsoft Windows Network Workgroup is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The list of servers for this workgroup is not currently available OK I am logged-in as local machine Administrator. The internet is accessible (I am writing this post through it) The Firewall is disabled The "Computer Bowser" and all networking services, I could find, are running Control Panel -- Network Connections -- Properties (of connection) --- Internet Protocol (TCP/IP), btn Properties --- --- tab General, btn "Advanced..." -- tab WINS-- rbtn "Enable NetBIOS over TCP/IP" checked Why cannot I access my own PC (and shares on it) through My Network Places What is the possible problem? How to daignose the problem?

  Read the article

• Why isn't this smbmount attempt working?

  - by Max Williams

  I can successfully access one of our local samba shares, which is on a windows pc (called marina) as follows: $ sudo /usr/bin/smbclient \\\\marina\\resource_library <my password> Domain=[MARINA] OS=[Windows 5.1] Server=[Windows 2000 LAN Manager] smb: \> So, that works. I'm now trying to mount the above location (the resource_library folder on marina) to /mnt/resource_library (as a read only folder), but it keeps failing - i've tried a few variations of specifying the location: $ sudo smbmount \\\\marina\\resource_library /mnt/resource_library -o username=max,password=<my password>,r mount error: could not resolve address for marina: No address associated with hostname No ip address specified and hostname not found and $ sudo smbmount //marina/resource_library /mnt/resource_library -o username=max,password=<my password>,r mount error: could not resolve address for marina: No address associated with hostname No ip address specified and hostname not found and both of the above with MARINA instead of marina. It's bound to be some dumb mistake i'm making, can anyone see it? cheers, max

  Read the article

• What's a good tool for checking from my own machine that my server is up?

  - by chico

  I'm looking for a good tool (web site or not) that I can use to do a simple check whether my web server is accessible from outside LAN (it's serving in a non-standard port). To give some context, I've gone through this problem: can't access my ip from outside. Even the tools I've found are not really working. Currently to fetch the html I serve with the online bash tool I do: curl <my ip>:<my port> \ | sed 's/&/\&amp;/g; s/</\&lt;/g; s/>/\&gt;/g; s/"/\&quot;/g; s/'"'"'/\&#39;/g' I'm looking for a simple tool that can display the html properly, or just show raw text without resorting to sed html escaping and curl.

  Read the article

• VPN Connection Causes Internal LAN Connection Loss with Server

  - by sleepisfortheweak

  I've tried configuring basic PPTP VPN at my small business using a number of different tutorials. As far as I can tell, the actual VPN connection worked fine, but upon connecting a client, the Server 'disappears' from the internal LAN. The RRAS service must be stopped before the connection is restored. My Setup: The network is simply a DSL Gateway/Router to the outside functioning as NAT/Firewall/DHCP. The server is a Win Server 2008 machine at fixed IP 192.168.1.200. The server has 1 NIC, so I used the 'custom' option when configuring RRAS. The RRAS settings should be default except that I've disabled ports for connection types I'm not using and reduced PPTP ports to 10. I've also created an address pool and disabled DHCP packet forwarding. The server only functions as a File Share and now a VPN Server. Local LAN computers all have mapped network shares to the server authenticated based on Local User/Group setup on the server. The Problem: The moment a client connects through VPN, the server 'disappears' from the local network. All mapped drives disconnect and there is no response to a ping 192.168.1.200. Even if the client disconnects, the server does not re-appear at that address until the RRAS service is stopped. I've Tried: Using an Address Pool inside and outside the local subnet. Using DCHP Relay Checking Inbound/Outbound filters (none enabled) The fact that nothing I've tried has had any effect, and that I can connect and successfully obtain an IP tells me that it's something more fundamental I'm missing. My gut tells me that it's something to do with the second IP address added by the VPN client somehow taking over the interface or traffic from the local LAN accidently getting routed to the VPN client instead of handled at the server once RRAS has become 'active' when a client connects. Hopefully this may be obvious to someone with real IT experience. I've been doing this a while and almost never been stumped. I'm starting to think it might actually be something tricky since my setup is pretty basic yet refuses to work. I'll be happy to include more info if this doesn't ring any bells right away for anyone. Thanks

  Read the article

• Forward nginx to Apache Tomcat

  - by erdimeola

  I'm totally new to nginx. I want to forward two subdomains to the two applications in my apache tomcat server. As I searched over internet, I found that rewrite does the forwarding but I cannot see forwarding. Here is my server configuration server { listen 80; server_name subdomain1.domain.com; rewrite ^ http://tomcat.ip:8080/app1$request_uri? permanent; } server { listen 80; server_name subdomain2.domain.com; rewrite ^ http://tomcat.ip:8080/app2$request_uri? permanent; } Whenever I invoke subdomain1.domain.com or subdomain2.domain.com, I'm redirected to the main page of nginx which states that nginx is successfully installed and further configuration is needed. So, How can I do the forwarding?

  Read the article

• Can I replace a router and DHCP server without disrupting traffic?

  - by SRobertJames

  I have a device which acts as a router and DHCP server. I'm replacing it, and would like to minimize down time. If I unplug it, and plug in a different device with the same IP, will all the PCs with DHCP leases keep on working? (I have DHCP Conflict detect on, so it shouldn't reassign a DHCP address already used). What if I want to change the IP (new subnet) - is there anyway to tell all the clients (Windows PCs) to release their DHCP leases and request new ones in a minute? If before unplugging the old device, I have it release all DHCP leases, will the Windows PCs automatically ask for new DHCP addresses?

  Read the article

< Previous Page | 232 233 234 235 236 237 238 239 240 241 242 243  | Next Page >