Search Results

Search found 20878 results on 836 pages for 'lint check'.

Page 236/836 | < Previous Page | 232 233 234 235 236 237 238 239 240 241 242 243  | Next Page >

• Custom Templates: Using user exits

  - by Anthony Shorten

  One of the features of Oracle Utilities Application Framework V4.1 is the ability to use templates and user exits to extend the base configuration files. The configuration files used by the product are based upon a set of templates shipped with the product. When the configureEnv utility asks for configuration settings they are stored in a configuration file ENVIRON.INI which outlines the environment settings. These settings are then used by the initialSetup utility to populate the various configuration files used by the product using templates located in the templates directory of the installation. Now, whilst the majority of the installations at any site are non-production and the templates provided are generally adequate for that need, there are circumstances where extension of templates are needed to take advantage of more advanced facilities (such as advanced security and environment settings). The issue then becomes that if you alter the configuration files manually (directly or indirectly) then you may lose all your custom settings the next time you run initialSetup. To counter this we allow customers to either override templates with their own template or we now provide user exits in the templates to add fragments of configuration unique to that part of the configuration file. The latter means that the base template is still used but additions are included to provide the extensions. The provision of custom templates is supported but as soon as you use a custom template you are then responsible for reflecting any changes we put in the base template over time. Not a big task but annoying if you have to do it for multiple copies of the product. I prefer to use user exits as they seem to represent the least effort solution. The way to find the user exits available is to either read the Server Administration Guide that comes with your product or look at individual templates and look for the lines: #ouaf_user_exit <user exit name> Where <user exit name> is the name of the user exit. User exits are not always present but are in places that we feel are the most likely to be changed. If a user exit does not exist the you can always use a custom template instead. Now lets show an example. By default, the product generates a config.xml file to be used with Oracle WebLogic. This configuration file has the basic setting contained in it to manage the product. If you want to take advantage of the Oracle WebLogic advanced settings, you can use the console to make those changes and it will be reflected in the config.xml automatically. To retain those changes across invocations of initialSetup, you need to alter the template that generates the config.xml or use user exits. The technique is this. Make the change in the console and when you save the change, WebLogic will reflect it in the config.xml for you. Compare the old version and new version of the config.xml and determine what to add and then find the user exit to put it in by examining the base template. For example, by default, the console is not automatically deployed (it is deployed on demand) in the base config.xml. To make the console deploy, you can add the following line to the templates/CM_config.xml.win.exit_3.include file (for windows) or templates/CM_config.xml.exit_3.include file (for linux/unix): <internal-apps-deploy-on-demand-enabled>false</internal-apps-deploy-on-demand-enabled> Now run initialSetup to reflect the change and if you check the splapp/config/config.xml file you will see the change applied for you. Now how did I know which include file? I check the template for config.xml and found there was an user exit at the right place. I prefixed my include filename with "CM_" to denote it as a custom user exit. This will tell the upgrade tools to leave that file alone whenever you decide to upgrade (or even apply fixes). User exits can be powerful and allow customizations to be added for advanced configuration. You will see products using Oracle Utilities Application Framework use this exits themselves (usually prefixed with the product code). You are also taking advantage of them.

  Read the article

• 13 Lösungen für eine höhere Sicherheit in einer Oracle Datenbank (Best Practices)

  - by C.Muetzlitz

  Externe Einflüsse wie Gesetze fordern die IT auf, (unsere) Daten zu schützen. Doch wie prüft man die eingestellte Sicherheit einer Oracle Datenbank überhaupt? Ist die geforderte Sicherheit ausreichend umgesetzt und zwar im Idealfall entsprechend dem notwendigen Schutzbedarf? Wann haben Sie eigentlich die Sicherheit Ihrer Oracle Datenbank das letzte Mal überprüft? Und noch besser gefragt, kennen Sie die Bedrohungen und die davon abgeleiteten Risiken? Alles Fragen deren Antworten ein verantwortlicher Anwendungsbesitzer sofort parat haben sollte oder sehen Sie das anders? Wie kann man sich am besten vor Bedrohungen schützen? Die einzige richtige Antwort auf diese Frage ist, durch Informationen und daraus abgeleitetes Wissen. Nun umfassen Informationen und das darin versteckte Wissen wahrscheinlich sehr viele Quellen. D.h. es wird immer schwieriger sich das richtige Wissen anzueignen und dieses Wissen für den Schutz von Daten und Datenbanken anzuwenden.Betrachtet man die Oracle Datenbank, dann empfehle ich zwei wesentliche Bereiche, die man tun muss bzw. wissen sollte. Die Best Practices Lösungen kennen, die man implementieren sollte und teilweise muss, um gute Sicherheit zu garantieren.Ich nenne diesen Bereich „13 Lösungen für eine höhere Sicherheit in einer Oracle Datenbank (Best Practices)“ Wie sieht der wirkliche Sicherheitszustand einer Oracle Datenbank aus.Diesen Bereich nenne ich „Check Oracle DB Security“ In diesem Beitrag möchte ich Sie nun in die Grundlagen einer guten Oracle Datenbank Sicherheit einführen und Sie befähigen, den Sicherheitszustand Ihrer Datenbank selber bestimmen zu können. 13 Lösungen für eine höhere Sicherheit in einer Oracle Datenbank (Best Practices)“  Password-Management aktiveren:Seien Sie sich bewusst, dass schwache Passwords eine hohe Bedrohung bedeuten. Aktivieren Sie ein vernünftiges Password Management Kennen Sie den Funktionsumfang Ihrer aktuellen Datenbank Version, auch die Funktionen, die nicht mehr unterstützt werden.Der "New Feature und Upgrade Guide" sollte eine Pflichtlektüre werden. Implementieren Sie eine passende Mindestsicherheit.Oracle liefert hier viele Vorgaben. Haben Sie das Rollen- und Account Management im GriffHier geht es um eine kontrollierte Privilegien-Vergabe (Least Privileg), eine Zwecktrennung im Account Management und eine andauernde Überprüfung des Rollenmanagements und Zugriffskonzepts Sicheres Datenbank Link Konzept implementierenGerade im Bereich der Datenintegration werden wiederholt DB Links in der Datenbank konfiguriert. Diese Links eröffnen u.U. unkontrollierte Zugriffe auf entfernte Datenbanken. Tracken Sie den Zugriff und setzen Sie ein sicheres DB Link Konzept um. Oracle liefert hier die entsprechenden Vorgaben. Definieren Sie Schutz-Policies für Ihre Anwendungen.Hierunter fällt z.B. ein richtiges Anwendungs-Owner und Anwendungs-User Setup Implementieren Sie den notwendigen Datenschutz für wichtige DatenKennen Sie die Daten, die geschützt werden müssen und schützen Sie diese angemessen. Kontrollieren Sie den Ressourcenverbrauch in Ihrer Datenbank Implementieren Sie eine sinnvolle Zwecktrennung in der DatenbankAuch bei der Datenbank ist es sinnvoll eine Zwecktrennung zu implementieren. Schalten Sie eine sinnvolle und gesetzeskonforme Protokollierung ein.Gesetze erfordern das und Oracle gibt eine Mindestprotokollierung vor. Implementieren Sie Prozesse, die den guten Zustand der Datenbank erhalten Führen Sie regelmäßige Health- Checks durchOracle liefert z.B. mit dem Enterprise Manager eine vollständige Library. Definieren Sie ein funktionierendes Patch-ManagementKennen Sie die Critical Patch Updates und handeln Sie falls notwendig. Check Oracle DB Security oder wer den Sicherheitszustand nicht kennt, wird auch keine Maßnahmen ergreifen Den Sicherheitszustand einer Oracle Datenbank zu überprüfen, ist sehr wichtig. Hierfür kann man verschiedene Anwendungen nutzen, die im Markt erhältlich sind. Eine gute Entscheidung wäre z.B. den Oracle Enterprise Manager (Cloud Control) mit dem Lifecycle Management zu nutzen, der periodisch den Sicherheitszustand für Sie ermittelt. Eine manuelle Überprüfung ist auch möglich, erfordert aber tiefes Wissen. Doch auch trotz der hohen Wissensanforderung ist ein Verstehen, wie man eine Oracle Datenbank manuell auf Sicherheit überprüft, wichtig. Vertrauen Sie nicht mehr auf Vermutungen, sondern nehmen Sie die Sicherheit Ihrer Datenbank ernst und lernen Sie den realen Zustand Ihrer Datenbank kennen. Wissen über reale Zustände und Wissen über geeignete Konzepte schützen. Erst dann können Sie entscheiden, welche Maßnahmen tatsächlich notwendig sind. Weiterführende Informationen: Oracle Online Dokumentation für die Datenbank Verschiedene Artikel in der Knowledge Base vom Oracle Support Das neue Buch „Oracle Security in der Praxis. Vollständige Sicherheitsüberprüfung Ihrer Oracle Datenbank“.

  Read the article

• Node.js Lockstep Multiplayer Architecture

  - by Wakaka

  Background I'm using the lockstep model for a multiplayer Node.js/Socket.IO game in a client-server architecture. User input (mouse or keypress) is parsed into commands like 'attack' and 'move' on the client, which are sent to the server and scheduled to be executed on a certain tick. This is in contrast to sending state data to clients, which I don't wish to use due to bandwidth issues. Each tick, the server will send the list of commands on that tick (possibly empty) to each client. The server and all clients will then process the commands and simulate that tick in exactly the same way. With Node.js this is actually quite simple due to possibility of code sharing between server and client. I'll just put the deterministic simulator in the /shared folder which can be run by both server and client. The server simulation is required so that there is an authoritative version of the simulation which clients cannot alter. Problem Now, the game has many entity classes, like Unit, Item, Tree etc. Entities are created in the simulator. However, for each class, it has some methods that are shared and some that are client-specific. For instance, the Unit class has addHp method which is shared. It also has methods like getSprite (gets the image of the entity), isVisible (checks if unit can be seen by the client), onDeathInClient (does a bunch of stuff when it dies only on the client like adding announcements) and isMyUnit (quick function to check if the client owns the unit). Up till now, I have been piling all the client functions into the shared Unit class, and adding a this.game.isServer() check when necessary. For instance, when the unit dies, it will call if (!this.game.isServer()) { this.onDeathInClient(); }. This approach has worked pretty fine so far, in terms of functionality. But as the codebase grew bigger, this style of coding seems a little strange. Firstly, the client code is clearly not shared, and yet is placed under the /shared folder. Secondly, client-specific variables for each entity are also instantiated on the server entity (like unit.sprite) and can run into problems when the server cannot instantiate the variable (it doesn't have Image class like on browsers). So my question is, is there a better way to organize the client code, or is this a common way of doing things for lockstep multiplayer games? I can think of a possible workaround, but it does have its own problems. Possible workaround (with problems) I could use Javascript mixins that are only added when in a browser. Thus, in the /shared/unit.js file in the /shared folder, I would have this code at the end: if (typeof exports !== 'undefined') module.exports = Unit; else mixin(Unit, LocalUnit); Then I would have /client/localunit.js store an object LocalUnit of client-side methods for Unit. Now, I already have a publish-subscribe system in place for events in the simulator. To remove the this.game.isServer() checks, I could publish entity-specific events whenever I want the client to do something. For instance, I would do this.publish('Death') in /shared/unit.js and do this.subscribe('Death', this.onDeathInClient) in /client/localunit.js. But this would make the simulator's event listeners list on the server and the client different. Now if I want to clear all subscribed events only from the shared simulator, I can't. Of course, it is possible to create two event subscription systems - one client-specific and one shared - but now the publish() method would have to do if (!this.game.isServer()) { this.publishOnClient(event); }. All in all, the workaround off the top of my head seems pretty complicated for something as simple as separating the client and shared code. Thus, I wonder if there is an established and simpler method for better code organization, hopefully specific to Node.js games.

  Read the article

• Graphical driver 13.10 ATI RV630

  - by Michael Cephalus

  I started updating the distro from 13.04 to 13.10. Then I got my hands on a Radeon HD 2600. I installed the RV630 compatible Catalystdriver from the official webpage. Then xserver crashed everytime I opened a browser or vlc fx. I took notice that there was no driver listed in configuration underneath. michael@statubtunu:~$ lshw -c video WARNING: you should run this program as super-user. *-display UNCLAIMED description: VGA compatible controller product: RV630 PRO [Radeon HD 2600 PRO] vendor: Advanced Micro Devices, Inc. [AMD/ATI] physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list configuration: latency=0 resources: memory:d0000000-dfffffff memory:e0500000-e050ffff ioport:1000(size=256) memory:e0000000-e001ffff i installed additional drivers from jockey and the ubuntu softwarecenter ati-driver. though that only made it to crash xserver completely and when i type: michael@statubtunu:~$ sudo startx X.Org X Server 1.14.3 Release Date: 2013-09-12 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu Current Operating System: Linux statubtunu 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 17:26:33 UTC 2013 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-13-generic root=UUID=8fb2e395-0ea2-4f45-ac66-225696b7ce2c ro quiet splash vt.handoff=7 Build Date: 15 October 2013 09:23:29AM xorg-server 2:1.14.3-3ubuntu2 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.30.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 12 18:50:02 2013 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Initializing built-in extension Generic Event Extension Initializing built-in extension SHAPE Initializing built-in extension MIT-SHM Initializing built-in extension XInputExtension Initializing built-in extension XTEST Initializing built-in extension BIG-REQUESTS Initializing built-in extension SYNC Initializing built-in extension XKEYBOARD Initializing built-in extension XC-MISC Initializing built-in extension SECURITY Initializing built-in extension XINERAMA Initializing built-in extension XFIXES Initializing built-in extension RENDER Initializing built-in extension RANDR Initializing built-in extension COMPOSITE Initializing built-in extension DAMAGE Initializing built-in extension MIT-SCREEN-SAVER Initializing built-in extension DOUBLE-BUFFER Initializing built-in extension RECORD Initializing built-in extension DPMS Initializing built-in extension X-Resource Initializing built-in extension XVideo Initializing built-in extension XVideo-MotionCompensation Initializing built-in extension SELinux Initializing built-in extension XFree86-VidModeExtension Initializing built-in extension XFree86-DGA Initializing built-in extension XFree86-DRI Initializing built-in extension DRI2 Loading extension GLX ERROR: could not insert 'fglrx': No such device (II) [KMS] drm report modesetting isn't supported. (EE) (EE) Backtrace: (EE) 0: /usr/bin/X (xorg_backtrace+0x49) [0xb77780b9] (EE) 1: /usr/bin/X (0xb75d8000+0x1a3e24) [0xb777be24] (EE) 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb75b540c] (EE) 3: /usr/bin/X (xf86findOption+0x2a) [0xb7681daa] (EE) 4: /usr/bin/X (xf86findOptionValue+0x23) [0xb7681f43] (EE) 5: /usr/bin/X (0xb75d8000+0x7ebfd) [0xb7656bfd] (EE) 6: /usr/bin/X (xf86ProcessOptions+0x37) [0xb7657507] (EE) 7: /usr/lib/xorg/modules/libvbe.so (vbeDoEDID+0xe7) [0xb5eb8647] (EE) 8: /usr/lib/xorg/modules/drivers/vesa_drv.so (0xb5ee7000+0x287c) [0xb5ee987c] (EE) 9: /usr/bin/X (InitOutput+0xb23) [0xb7659c33] (EE) 10: /usr/bin/X (0xb75d8000+0x2a30b) [0xb760230b] (EE) 11: /lib/i386-linux-gnu/libc.so.6 (__libc_start_main+0xf5) [0xb71ba905] (EE) 12: /usr/bin/X (0xb75d8000+0x2a908) [0xb7602908] (EE) (EE) Segmentation fault at address 0x5 (EE) Fatal server error: (EE) Caught signal 11 (Segmentation fault). Server aborting (EE) (EE) Please consult the The X.Org Foundation support at for help. (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. (EE) (EE) Server terminated with error (1). Closing log file. This is what comes, but no GUI. Is there any way to deal with this?

  Read the article

• what is the best way to use loops to detect events while the main loop is running?

  - by yao jiang

  I am making an "game" that has pathfinding using pygame. I am using Astar algo. I have a main loop which draws the whole map. In the loop I check for events. If user press "enter" or "space", random start and end are selected, then animation starts and it will try to get from start to end. My draw function is stupid as hell right now, it works as expected but I feel that I am doing it wrong. It'll draw everything to the end of the animation. I am also detecting events in there as well. What is a better way of implementing the draw function such that it will draw one "step" at a time while checking for events? animating = False; while loop: check events: if not animating: # space or enter press will choose random start/end coords if enter_pressed or space_pressed: start, end = choose_coords route = find_route(start, end) draw(start, end, grid, route) else: # left click == generate an event to block the path # right click == user can choose a new destination if left_mouse_click: gen_event() reroute() elif right_mouse_click: new_end = new_end() new_start = current_pos() route = find_route(new_start, new_end) draw(new_start, new_end, grid, route) # draw out the grid def draw(start, end, grid, route_coord): # draw the end coords color = red; pick_image(screen, color, width*end[1],height*end[0]); pygame.display.flip(); # then draw the rest of the route for i in range(len(route_coord)): # pausing because we want animation time.sleep(speed); # get the x/y coords x,y = route_coord[i]; event_on = False; if grid[x][y] == 2: color = green; elif grid[x][y] == 3: color = blue; for event in pygame.event.get(): if event.type == pygame.MOUSEBUTTONDOWN: if event.button == 3: print "destination change detected, rerouting"; # get mouse position, px coords pos = pygame.mouse.get_pos(); # get grid coord c = pos[0] // width; r = pos[1] // height; grid[r][c] = 4; end = [r, c]; elif event.button == 1: print "user generated event"; pos = pygame.mouse.get_pos(); # get grid coord c = pos[0] // width; r = pos[1] // height; # mark it as a block for now grid[r][c] = 1; event_on = True; if check_events([x,y]) or event_on: # there is an event # mark it as a block for now grid[y][x] = 1; pick_image(screen, event_x, width*y, height*x); pygame.display.flip(); # then find a new route new_start = route_coord[i-1]; marked_grid, route_coord = find_route(new_start, end, grid); draw(new_start, end, grid, route_coord); return; # just end draw here so it wont throw the "index out of range" error elif grid[x][y] == 4: color = red; pick_image(screen, color, width*y, height*x); pygame.display.flip(); # clear route coord list, otherwise itll just add more unwanted coords route_coord_list[:] = [];

  Read the article

• Customers Discuss: Real-World Operational Reporting with Oracle GoldenGate

  - by Irem Radzik

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} As businesses leverage business intelligence and analytics for day-to-day decision making, operational reporting solutions become more and more common. While some companies can use their production OLTP system for running operational reports, for many it is too much overhead and performance impact for transaction processing systems.  Oracle GoldenGate’s real-time data integration capabilities enable companies to create a real-time replica of their OLTP systems, dedicated for operational reporting. This instance can be optimized for the reports needed as well such as containing only the tables needed from the source. Oracle GoldenGate has certified solutions for many Oracle applications such as EBusiness Suite, Peoplesoft, JD Edwards, to offload operational reporting to another reporting server that has real-time data feeding from the production system. At Oracle OpenWorld we will be hearing from a panel of Oracle GoldenGate customers how they deployed GoldenGate for operational reporting. Comcast, Turk Telekom, and Raymond James will be sharing their experiences and the benefits achieved when implementing GoldenGate’s solution. If you have performance degradation in your production systems due to reporting or ad-hoc queries, and you will be at OpenWorld, don’t miss this informative session: Real-World Operational Reporting with Oracle GoldenGate: Customer Panel-- Tuesday Oct 2nd 11:45am Mascone West 3005. For other data integration sessions at OpenWorld, please check our Focus-On document.  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} If you cannot attend OpenWorld, please check out related white paper “Using Oracle GoldenGate to Achieve Operational Reporting for Oracle Applications” to learn more.

  Read the article

• Handling "related" work within a single agile work item

  - by Tesserex

  I'm on a project team of 4 devs, myself included. We've been having a long discussion on how to handle extra work that comes up in the course of a single work item. This extra work is usually things that are slightly related to the task, but not always necessary to accomplish the goal of the item (that may be an opinion). Examples include but are not limited to: refactoring of the code changed by the work item refactoring code neighboring the code changed by the item re-architecting the larger code area around the ticket. For example if an item has you changing a single function, you realize the entire class now could be redone to better accommodate this change. improving the UI on a form you just modified When this extra work is small we don't mind. The problem is when this extra work causes a substantial extension of the item beyond the original feature point estimation. Sometimes a 5 point item will actually take 13 points of time. In one case we had a 13 point item that in retrospect could have been 80 points or more. There are two options going around in our discussion for how to handle this. We can accept the extra work in the same work item, and write it off as a mis-estimation. Arguments for this have included: We plan for "padding" at the end of the sprint to account for this sort of thing. Always leave the code in better shape than you found it. Don't check in half-assed work. If we leave refactoring for later, it's hard to schedule and may never get done. You are in the best mental "context" to handle this work now, since you're waist deep in the code already. Better to get it out of the way now and be more efficient than to lose that context when you come back later. We draw a line for the current work item, and say that the extra work goes into a separate ticket. Arguments include: Having a separate ticket allows for a new estimation, so we aren't lying to ourselves about how many points things really are, or having to admit that all of our estimations are terrible. The sprint "padding" is meant for unexpected technical challenges that are direct barriers to completing the ticket requirements. It is not intended for side items that are just "nice-to-haves". If you want to schedule refactoring, just put it at the top of the backlog. There is no way for us to properly account for this stuff in an estimation, since it seems somewhat arbitrary when it comes up. A code reviewer might say "those UI controls (which you actually didn't modify in this work item) are a bit confusing, can you fix that too?" which is like an hour, but they might say "Well if this control now inherits from the same base class as the others, why don't you move all of this (hundreds of lines of) code into the base and rewire all this stuff, the cascading changes, etc.?" And that takes a week. It "contaminates the crime scene" by adding unrelated work into the ticket, making our original feature point estimates meaningless. In some cases, the extra work postpones a check-in, causing blocking between devs. Some of us are now saying that we should decide some cut off, like if the additional stuff is less than 2 FP, it goes in the same ticket, if it's more, make it a new ticket. Since we're only a few months into using Agile, what's the opinion of all the more seasoned Agile veterans around here on how to handle this?

  Read the article

• Information on upgrading Kinect Applications to MS SDK Beta 2.

  - by mbcrump

  Introduction Microsoft recently released the Kinect for Windows SDK Beta 2. It contains many enhancements and fixes that can be found here. The only problem with it is that a lot of current demo applications no longer function properly. Today, I’m going to walk you through a typical scenario of upgrading a Kinect application built with Beta 1 to Beta 2. Note: This tutorial covers WPF, but you can use the same techniques for WinForms. 1) Fix the references Let’s start with a fairly popular Kinect demo called Kinect User Interface Demo. This project uses the beta 1 version of Microsoft.Research.Kinect.dll and version 1.0.0.0 of Coding4Fun’s Kinect library. After you download the source code and extract the zip you will see the following references in Visual Studio 2010: Pay attention to the following references as these are the .dlls that you will have to update: Coding4Fun.Kinect.Wpf Microsoft.Research.Kinect If you click on Coding4Fun.Kinect.Wpf file you will see the following version information (v1.0.0.0): This needs to be upgraded to the Coding4Fun Kinect library built against Beta 2. So head over to http://c4fkinect.codeplex.com/ and hit download and you will have the following files. Go ahead and hit the delete key on your keyboard to remove the Coding4Fun.Kinect.Wpf.dll file from your project. Select “Add Reference” and navigate out to the folder where you extracted the files and select Coding4Fun.Kinect.Wpf.dll. If you click on the Coding4Fun.Kinect.Wpf.dll file and check properties it should be listed at 1.1.0.0: Fix Microsoft.Research.Kinect.dll The official SDK Beta 2 released a new .dll that you will need to reference in your application. Go ahead and select Microsoft.Research.Kinect.dll in your application and hit the Delete key on your keyboard. Go ahead and select Add Reference again and select Microsoft.Research.Kinect.dll from the .NET tab. Double check and make sure the version number is 1.0.0.45 as shown below. References fixed – Runtime needs to be updated. So we have fixed the references in a typical Kinect application that uses Microsoft’s SDK and C4F Kinect libraries. Now, we will need to update the runtime. All Beta 1 Kinect applications will instantiate the Runtime with the following code: Can you see that it is now marked with [Depreciated]? That means we need to update it before Microsoft decides to remove it from future versions of the SDK. We can fix this very easily by replacing this code: readonly Runtime _runtime = new Runtime(); with Microsoft.Research.Kinect.Nui.Runtime _nui; and adding similar code to our Loaded event as shown below public MainWindow() { InitializeComponent(); Loaded += new RoutedEventHandler(MainWindow_Loaded); } void MainWindow_Loaded(object sender, RoutedEventArgs e) { if (Runtime.Kinects.Count == 0) { txtInfo.Text = "Missing Kinect"; } else { _nui = Runtime.Kinects[0]; _nui.Initialize(RuntimeOptions.UseColor); // Video Frame Ready Event can happen now!!! //_nui.VideoFrameReady += new EventHandler<ImageFrameReadyEventArgs>(_nui_VideoFrameReady); _nui.VideoStream.Open(ImageStreamType.Video, 2, ImageResolution.Resolution640x480, ImageType.Color); } } In this sample, I am testing to see if a Kinect is detected and if it is then I initialize the runtime with my first Kinect by using the Runtime.Kinects[0]. You can also specify other Kinect devices here. The rest of the code is standard code that you simply modify however you wish (ie Skeletal, Depth, etc) depending on what type of video feed you want. Conclusion As you can see it really wasn’t that painful to upgrade your project to Beta 2. I would recommend that you go ahead and upgrade to Beta 2 as future versions of the SDK will use these methods.  Thanks for reading. Subscribe to my feed

  Read the article

• Find Rules and Defaults using the PowerShell for SQL Server 2008 Provider

  - by BuckWoody

  I ran into an issue the other day where I couldn't set up some features in SQL Server 2008 because they ddon't support the use of Rules or Defaults. Let me explain a little more about that. In older versions of SQL Server, you could decalre a "Rule" or "Default" just like you do with a Table Constraint today. You would then "bind" these rules or defaults to the tables you wanted them to apply to. Sure, there are advantages and disadvantages to this approach, but it certainly isn't standard Data Definition Language (DDL), so they are deprecated and many features don't work with them any more. Honestly, it's been so long since I've seen them in use I had forgotten to even check for them. My suspicion is that this was a new database created with an older script. Nevertheless, the feature failed when it ran into one. Immediately I thought that I had better build some logic into my process to try and catch those - but how? Lots of choices here, but since I was using PowerShell to do the rest of the work, I thought I would investigate how easy it would be just to do it there. And using the SQL Server 2008 provider, this could not be simpler. I won't show all of the scrupt here, because I was testing for these as a condition and then bailing out of the script and sending a notification, but all it is using is the DIR command! Here's an example on my "UNIVAC" computer for the "pubs" database: Find Rules using PowerShell: dir SQLSERVER:\SQL\UNIVAC\DEFAULT\Databases\pubs\Rulesdir SQLSERVER:\SQL\UNIVAC\DEFAULT\Databases\pubs\Defaults And this one will look in all databases:  #All Databases:dir SQLSERVER:\SQL\UNIVAC\DEFAULT\Databases | select-object -property Name, Rules, Defaults Awesome. Love me some PowerShell. Script Disclaimer, for people who need to be told this sort of thing: Never trust any script, including those that you find here, until you understand exactly what it does and how it will act on your systems. Always check the script on a test system or Virtual Machine, not a production system. Yes, there are always multiple ways to do things, and this script may not work in every situation, for everything. It’s just a script, people. All scripts on this site are performed by a professional stunt driver on a closed course. Your mileage may vary. Void where prohibited. Offer good for a limited time only. Keep out of reach of small children. Do not operate heavy machinery while using this script. If you experience blurry vision, indigestion or diarrhea during the operation of this script, see a physician immediately.       Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Dallas First Regionals 2012&ndash; For Inspiration and Recognition of Science and Technology

  - by T

  Wow!  That is all I have to say after the last 3 days. Three full fun filled days in a world that fed the geek, sparked the competitor, inspired the humanitarian, encouraged the inventor, and continuously warmed my heart.  As part of the Dallas First Regionals, I was awed by incredible students who teach as much as they learn, inventive and truly caring mentors that make mentoring look easy, and completely passionate and dedicated volunteers that bring meaning to giving all that you have and making events fun and safe for all.  If you have any interest in innovation, robotics, or highly motivated students, I can’t recommend anything any higher than visiting a First Robotics event. This is my third year with First and I was honored enough to serve the Dallas First Regionals as both a Web Site evaluator and as the East Field Volunteer Coordinator.  This was also the first year my daughter volunteered with me.  My daughter and I both recognize how different the First program is from other team events.  The difference with First is that everyone is a first class citizen.   It is a difference we can feel through experiencing and observing interactions between executives, respected engineers, students, and event staff.  Even with a veracious competition, you still find a lot of cooperation and we never witnessed any belittling between teams or individuals. First Robotics coined the term “Gracious Professionalism”.   It's a way of doing things that encourages high-quality work, emphasizes the value of others, and respects individuals and the community.1 I was introduced to this term as the Volunteer Coordinator when I was preparing the volunteer instructional speech.  Through the next few days, I discovered it is truly core to everything that First does.  One of the ways First accomplishes Gracious Professionalism is by utilizing another term they came up with which is “CoopertitionTM”. At FIRST, CoopertitionTM is displaying unqualified kindness and respect in the face of fierce competition.1   One of the things I never liked about sports was the need to “destroy” the other team.  First has really found a way to integrate CoopertitionTM  into the rules so teams can be competitive and part of that competition rewards cooperation. Oh and did I mention it has ROBOTS!!!  This year it had basket ball playing Kinect connected, remote controlled, robots!  There are not words for how exciting these games are.  You HAVE to check out this years game, Rebound Rumble, on youtube or you can view live action on Dallas First Video (as of this posting, the recording haven’t posted yet but should be there soon).  There are also some images below. Whatever it is, these students get it and exemplify it and these mentors ooze with it.  I am glad that First supports these events so we can all learn and be inspired by these exceptional students and mentors.  I know that no matter how much I give, it will never compare to what I gain volunteering at First.  Even if you don’t have time to volunteer, you owe it to yourself to go check out one of these events.  See what the future holds, be inspired, be encouraged, take some knowledge, leave some knowledge and most of all, have FUN.  That is what First is all about and thanks to First, I get it.   First Dallas Regionals 2012 VIEW SLIDE SHOW DOWNLOAD ALL 1.  USFirst http://www.usfirst.org/aboutus/gracious-professionalism

  Read the article

• Fixing some Visual Studio RC install issues

  - by terje

  The Visual Studio RC has shown some install issues in some cases, particularly for those who upgrades from VS 11 Beta.  I have listed the fixes known now below, and will update if there are more issues.  Note that a repair will not fix the issue, and a Windows restore and subsequent reinstall may not fix it either.  The system seems to remember too much. That was the case for me, at least.  The fixes below however, cures these issues. 1. The Team Explorer Build node doesn’t work You get an error saying System.TypeLoadException like this: To solve this do as follows: 1. Open a command prompt as administrator 2. Go to your program files directory for VS 2012 and down to  the extension folder like:   C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\CommonExtensions\Microsoft\TeamFoundation\Team Explorer 3. Run “gacutil –if Microsoft.TeamFoundation.Build.Controls.dll     2. The SQL Editor gives loading error When you start up VS 2012 RC you get a loading error message.  The same happens if you try to go from the menu to  SQL/Transact-SQL Editor/New Query.    To solve this do as follows: 1. Open Control Panel/Programs and Features 2. Locate the “Microsoft SQL Server 2012 Data-Tier App Framework     (Note , you might find up to 4 such instances) The ones with version numbers ending in 55 is from the SQL 2012 RC, the ones ending in 60 is from the SQL 2012 RTM.  There are two of each, one for x32 and one for x64.  Which is which no one knows. 3. Right click each of them, and select Repair. (It would be nice if someone with this issue tries only the latest RTM ones, and see if that clears the error, and comment back to this post. I am out of non-functioning VS’s )   3.  Errors referring to some extension You get errors referring to some extension that can’t be loaded, or can’t be found.  Check the activity log (see below), and verify there.  If you see yellow collision warnings there, the fix here should solve those too. To solve these:    1. Open a Visual Studio 2012 command prompt 2.  Run:   devenv /resetsettings     How to check for errors using the log Do as follows to get to the activity log for Visual studio 2012 RC 1. Open a Visual Studio 2012 command prompt 2. Run:   devenv /log This starts up Visual Studio.  3. Go to %appdata%/Microsoft\VisualStudio\11.0 4. Double click the file named ActivityLog.xml.  It will start up in your browser, and be formatted using the xslt in the same directory. 5.  Look for items marked in red.  Example for Issue 1 :

  Read the article

• 11.10 desktop alerts (volume change and terminal bell) stopped working but all other audio still works

  - by FlabbergastedPickle

  All, My sound works just fine in 11.10 64-bit install on HP dm1-4050 Sandy Bridge notebook (e.g. audio works in Banshee, flash, games, browser, Thunderbird email notification, etc.), but the core desktop notifications (e.g. pressing a tab in a terminal where there is more than one option should trigger a terminal bell, or changing volume using volume keys should be accompanied with the supporting "quack" that the volume app makes) do not work. I've intentionally disabled login sound as explained here on ask ubuntu but even enabling it back makes no difference. These notifications did work before just fine and I am not sure when did the actually stop working but it must've been fairly recently. Only things I did were trying to install some ppa edge xorg drivers for my intel card (a separate issue) but also reverted them all with ppa-purge once I discovered they did not improve anything. Other thing I did was check volume settings with alsamixer and did alsactl store for the soundcard after I did some experimenting with volume settings for PCM (on my laptop PCM at 100% crackles so I had to lower it and make pulseaudio ignore its setting as per ask ubuntu's page). That said, neither of these should have any bearing on the said notifications since the volume is up and they clearly work everywhere else but the core desktop events. The system ready drum sound when Ubuntu boots and user reaches the login screen also does not work. The guest login behaves exactly same as mine. Audio works (including the login sound since I've not disabled it for the guest account), but no quacks when changing the volume or terminal bell sounds... I've tried copying ubuntu sounds to /usr/share/sounds/ as suggested on ask ubuntu and that did not work. I also tried using dconf-editor to check sound theme settings and tried both freedesktop (which is what it was set to) and ubuntu, as suggested on ask ubuntu. This did not work either. I tried purging the ~/.pulse folder and the /tmp/*pulse* entries, rebooting and restarting pulseaudio with -D flag. While audio came back on and behaved just fine in all aspects (e.g. one can adjust volume levels, play music, games, in-browser sound stuff, and other app alerts) except for the system ready drum sound (at the login screen), and any system event (terminal bell and volume change quack sound). It is interesting that the quack sound works inside system settings-sound when adjusting levels there, but it does not when volume is changed via top bar's volume settings... I do recall that at one point yesterday when I was restarting pulseaudio the quacks that accompany volume change did start working but I have no idea what caused that. This was also when I first realized those alerts were not working. After rebooting it was again gone. I did compile my own 3.0.14-rt31 kernel a little while ago as instructed on one of the wiki's for the 11.10 rt kernel. Everything works as before except for the said sound alerts. I am not sure if this began happening since I started using the rt kernel though and yesterday's momentary ability to hear those quacks while changing the volume make me believe that the kernel is not one responsible for this problem. One more thing I can think of is that I used alsoft-conf tool to configure buffering on the OpenAL (due to TA Spring's choppy audio) and changed in there default audio device to ALSA. I also tried reverting it to Pulseaudio as the only allowed output but the bottom part of the Backend tab always reverts to ALSA even when I select Pulseaudio. The pulseaudio does remain as the only active choice on top. This, however, once again does not make any sense in terms of preventing desktop audio alerts when everything else including OpenAL games plays sound just fine... So, there you have it, as verbose as I could make it :-). I tried all I could find on this issue and had no luck so far... Any ideas?

  Read the article

• Know Your Service Request Status

  - by Get Proactive Customer Adoption Team

  Untitled Document To monitor a Service Request or not to monitor a Service Request... That should never be the question Monitoring the Service Requests you create is an essential part of the process to resolve your issue when you work with a Support Engineer. If you monitor your Service Request, you know at all times where it is in the process, or to be more specific, you know at all times what action the Support Engineer has taken on your request and what the next step is. When you think about it, it is rather simple... Oracle Support is working the issue, Oracle Development is working the issue, or you are. When you check on the status, you may find that the Support Engineer has a question for you or the engineer is waiting for more information to resolve the issue. If you monitor the Service Request, and respond quickly, the process keeps moving, and you’ll get your answer more quickly. Monitoring a Service Request is easy. All you need to do is check the status codes that the Support Engineer or the system assigns to your Service Request. These status codes are not static. You will see that during the life of your Service request, it will go through a variety of status codes. The best advice I can offer you when you monitor your Service Request is to watch the codes. If the status is not changing, or if you are not getting responses back within the agreed timeframes, you should review the action plan the Support Engineer has outlined or talk about a new action plan. Here are the most common status codes: Work in Progress indicates that your Support Engineer is researching and working the issue. Development Working means that you have a code related issue and Oracle Support has submitted a bug to Development. Please pay a particular attention to the following statuses; they indicate that the Support Engineer is waiting for a response from you: Customer Working usually means that your Support Engineer needs you to collect additional information, needs you to try something or to apply a patch, or has more questions for you. Solution Offered indicates that the Support Engineer has identified the problem and has provided you with a solution. Auto-Close or Close Initiated are statuses you don’t want to see. Monitoring your Service Request helps prevent your issues from reaching these statuses. They usually indicate that the Support Engineer did not receive the requested information or action from you. This is important. If you fail to respond, the Support Engineer will attempt to contact you three times over a two-week period. If these attempts are unsuccessful, he or she will initiate the Auto-Close process. At the end of this additional two-week period, if you have not updated the Service Request, your Service Request is considered abandoned and the Support Engineer will assign a Customer Abandoned status. A Support Engineer doesn’t like to see this status, since he or she has been working to solve your issue, but we know our customers dislike it even more, since it means their issue is not moving forward. You can avoid delays in resolving your issue by monitoring your Service Request and acting quickly when you see the status change. Respond to the request from the engineer to answer questions, collect information, or to try the offered solution. Then the Support Engineer can continue working the issue and the Service Request keeps moving forward towards resolution. Keep in mind that if you take an extended period of time to respond to a request or to provide the information requested, the Support Engineer cannot take the next step. You may inadvertently send an implicit message about the problem’s urgency that may not match the Service Request priority, and your need for an answer. Help us help you. We want to get you the answer as quickly as possible so you can stay focused on your company’s objectives. Now, back to our initial question. To monitor Service Requests or not to monitor Service Requests? I think the answer is clear: yes, monitor your Service Request to resolve the issue as quickly as possible.

  Read the article

• Where Have All the Ugly Forms Gone? Users and ADF Took Care Of It

  - by ultan o'broin

  Sometimes I hear that our application demos are a bit too "cutsey" and that we never talk about with any user roles that have lots of data entry as a requirement. Some (no names) consider those old clunker forms, with the myriad rows of fields, to be super-productive for data clerks. We do have such roles covered in Oracle Fusion Applications for sure. But consider what is really the issue here: productivity. Check out how the Oracle Fusion Financials Applications User Experience team went about designing for productivity when receiving and entering invoice data, for example. See how Fusion Financials caters so well for input and control of data? Central to all this is knowing the users and how they work: what tasks do they need to perform, and when. Read more about Fusion Financials productivity in the white paper, Get It Done Fast, Get It Done Right: The Oracle Fusion Financials User Experience. Now and then, I see forms that weren't designed for end user activity at all. Instead, they were designed by developers or by the IT department around the database schema. Forms with literally dozens of fields on the same page, sometimes. Forms that give the impression there was only task involved, when there may have been several. At times, completing one of these huge forms accurately became so tedious that, under pressure, it made more sense for the user to complete it quickly as possible and then let somebody else check it for accuracy and fill in the gaps from data emailed along in spreadsheet form. Data accuracy is critical in our business. Not good. Not efficient. Not productive. So here are a few basics on forms design for data entry-type user roles. A great place for developers to start exploring what is possible with forms layout is the Rich Client User Experience (RCUX) guidance on Form Layout, using ADF components. User-Centered Forms Design Considerations The starting point--something you must always keep in mind with your own design--is design for the end user. Find a representative end user, and keep that user engaged throughout the design, deployment, and test process. Consider these points in user testing those forms: Are there automated or technical solutions to entering the data that avoid manual input in the first place? For example, imports, uploads, OCR, whatever. Some day we will be able to tell Siri to do it, but leave that for now. Design your form to reflect the task involved (i.e., the business process) and not the database schema. On the form, group like fields together, logically. Eliminate duplicate data entry or prepopulate from previous data entry. Allow users to complete fields in the order they wish (i.e., no interdependency). Allow for tabbing between fields (keyboard is faster than mouse), so know how the browser supports this (see that RCUX guideline). Allow for final validation at the page level not at field-level entry. Way better for heads-down users. For example, ADF messages allow you to see a list of all validation errors on a page on a final submit or navigation action and to easily navigate to the point of error. Better still, be error tolerant. Allow users to enter data in formats they comfortable with. Bind any relevant user preference setting to the input format allowed (for example, the locale date format). Explore what data entry conversion can do for you automatically too (see the ADF converter demos, convenience patterns can also be written). Only ask for data input when it's needed. Get rid of, or hide optional fields. Cut down on the number of mandatory fields, and mark them clearly (use a *). Clearly label the fields in plain language. I am sure you may have a few more tips on forms design for data entry users. Remember the user before finding the comments.

  Read the article

• Oracle GoldenGate 11g Release 2 Launch Webcast Replay Available

  - by Irem Radzik

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif"; mso-fareast-font-family:"Times New Roman";} For those of you who missed Oracle GoldenGate 11g Release 2 launch webcasts last week, the replay is now available from the following url. Harnessing the Power of the New Release of Oracle GoldenGate 11g I would highly recommend watching the webcast to meet many new features of the new release and hear the product management team respond to the questions from the audience in a nice long Q&A section. In my blog last week I listed the media coverage for this new release. There is a new article published by ITJungle talking about Oracle GoldenGate’s heterogeneity and support for DB2 for iSeries: Oracle Completes DB2/400 Support in Data Replication Tool As mentioned in last week’s blog, we received over 150 questions from the audience and in this blog I'd like to continue to post some of the frequently asked,  questions and their answers: Question: What are the fundamental differences between classic data capture and integrated data capture? Do both use the redo logs in the source database? Answer: Yes, they both use redo logs. Classic capture parses the redo log data directly, whereas the Integrated Capture lets the Oracle database parse the redo log record using an internal API. Question: Does GoldenGate version need to match Oracle Database version? Answer: No, they are not directly linked. Oracle GoldenGate 11g Release 2 supports Oracle Database version 10gR2 as well. For Oracle Database version 10gR1 and Oracle Database version 9i you will need GoldenGate11g Release 1 or lower. And for Oracle Database 8i you need Oracle GoldenGate 10 or earlier versions. Question: If I already use Data Guard, do I need GoldenGate? Answer: Data Guard is designed as the best disaster recovery solution for Oracle Database. If you would like to implement a bidirectional Active-Active replication solution or need to move data between heterogeneous systems, you will need GoldenGate. Question: On Compression and GoldenGate, if the source uses compression, is it required that the target also use compression? Answer: No, the source and target do not need to have the same compression settings. Question: Does GG support Advance Security Option on the Source database? Answer: Yes it does. Question: Can I use GoldenGate to upgrade the Oracle Database to 11g and do OS migration at the same time? Answer: Yes, this is a very common project where GoldenGate can eliminate downtime, give flexibility to test the target as needed, and minimize risks with fail-back option to the old environment. For more information on database upgrades please check out the following white papers: Best Practices for Migrating/Upgrading Oracle Database Using Oracle GoldenGate 11g Zero-Downtime Database Upgrades Using Oracle GoldenGate Question: Does GoldenGate create any trigger in the source database table level or row level to for real-time data integration? Answer: No, GoldenGate does not create triggers. Question: Can transformation be done after insert to destination table or need to be done before? Answer: It can happen in the Capture (Extract) process, in the  Delivery (Replicat) process, or in the target database. For more resources on Oracle GoldenGate 11gR2 please check out our Oracle GoldenGate 11gR2 resource kit as well.

  Read the article

• BizTalk 2009 - The Community ODBC Adapter: Schema Generation

  - by Stuart Brierley

  Having previously detailed the installation of the Community ODBC Adapter for BizTalk 2009, the next thing I will be looking at is the generation of schemas using this ODBC adapter. Within your BizTalk 2009 project, right click the project and select Add Generated Items.  In the resultant window choose Add Adapter Metadata and click Add to open the Add Adapter Wizard. Check that the BizTalk Server and Database names are correct, select the ODBC adapter and click next. You must now set the connection string. To start with choose set, then new DSN (data source name). You now need to define the Data Source you will be connecting to.  On the User DSN tab select Add add then driver you want to use. In this case I am going to use the MySQL ODBC Driver.  A User DSN will only be visible on the current machine with you as a user. * Although I initially set up a User DSN and this was fine for creating schemas with, I later realised that you actually need a system DSN as the BizTalk host service needs this to be able connect to the database on a receive or send port. You will then be asked to Set up the MySQL ODBC Data Source.  In my case this is a local database making use of named pipes, so I had to make sure that I ticked the "Force use of named pipes" check box and removed the "# The Pipe the MySQL Server will use socket=mysql" line from the mysql.ini; with this is place the connection would fail as there is no apparent way to specify the pipe name in the ODBC driver configuration. This will then update the User DSN tab with the new Data Source.  Make sure that you select it and press OK. Select it again in the Choose Data Source window and press OK.  On the ODBC transport window select next. You will now be presented with the Schema Information window, where you must supply the namespace, type and root element names for your schema. Next choose the type of statement that you will be using to create your schema - in this case I am using a stored procedure. *I later discovered that this option is fine for MySQL stored procedures without input parameters, but failed for MySQL stored procedures with input parameters.  (I will be posting on the way to handle input parameters soon) Next you will need to specify the name of the stored procedure.  In this case I have a simple stored procedure to return all the data held by my TestTable in MySQL. Select * from TestTable; The table itself has three columns: Name, Sex and Married. Selecting finish should now hopefully create your schemas based on the input and output from your stored procedure. In my case I have:   An empty schema for the request; after all I have no parameters for the stored procedure.  A response schema comprised of a Table Record with Name, Sex and Married children. Next I will be looking at the use of the ODBC adpater with: Receive ports Send ports

  Read the article

• Part 6: Extensions vs. Modifications

  - by volker.eckardt(at)oracle.com

  Customizations = Extensions + Modifications In the EBS terminology, a customization can be an extension or a modification. Extension means that you mainly create your own code from scratch. You may utilize existing views, packages and java classes, but your code is unique. Modifications are quite different, because here you take existing code and change or enhance certain areas to achieve a slightly different behavior. Important is that it doesn't matter if you place your code at the same or at another place – it is a modification. It is also not relevant if you leave the original code enabled or not! Why? Here is the answer: In case the original code piece you have taken as your base will get patched, you need to copy the source again and apply all your changes once more. If you don't do that, you may get different results or write different data compared to the standard – this causes a high risk! Here are some guidelines how to reduce the risk: Invest a bit longer when searching for objects to select data from. Rather choose a view than a table. In case Oracle development changes the underlying tables, the view will be more stable and is therefore a better choice. Choose rather public APIs over internal APIs. Same background as before: although internal structure might change, the public API is more stable. Use personalization and substitution rather than modification. Spend more time to check if the requirement can be covered with such techniques. Build a project code library, avoid that colleagues creating similar functionality multiple times. Otherwise you have to review lots of similar code to determine the need for correction. Use the technique of “flagged files”. Flagged files is a way to mark a standard deployment file. If you run the patch analyse (within Application Manager), the analyse result will list flagged standard files in case they will be patched. If you maintain a cross reference to your own CEMLIs, you can easily determine which CEMLIs have to be reviewed. Implement a code review process. This can be done by utilizing team internal or external persons. If you implement such a team internal process, your team members will come up with suggestions how to improve the code quality by themselves. Review heavy customizations regularly, to identify options to reduce complexity; let's say perform this every 6th month. You may not spend days for such a review, but a high level cross check if the customization can be reduced is suggested. De-install customizations which are no more required. Define a process for this. Add a section into the technical documentation how to uninstall and what are possible implications. Maintain a cross reference between CEMLIs and between CEMLIs, EBS modules and business processes. Keep this list up to date! Share this list! By following these guidelines, you are able to improve product stability. Although we might not be able to avoid modifications completely, we can give a much better advise to developers and to our test team. Summary: Extensions and Modifications have to be handled differently during their lifecycle. Modifications implicate a much higher risk and should therefore be reviewed more frequently. Good cross references allow you to give clear advise for the testing activities.

  Read the article

• Passed: Exam 70-480: Programming in HTML5 with JavaScript and CSS3

  First off: Mission accomplished successfully. And it was fun! Using the resources listed in my previous article about Learning Content, I'd like to thank Microsoft Technical Evangelists Jeremy Foster and Michael Palermo for their excellent jump start videos on Channel 9, and the various authors at Pluralsight. Local Prometric testing centre Back in November I chose a local testing centre which was the easiest to access from my office despite the horrible traffic you might experience here on the island. Actually, it was not the closest one. But due to their website, their awards as Microsoft Learning Center, and my general curiosity about the premises, I gave FRCI my priority. Boy, how should I regret this decision this morning... The official Prometric exam guide asks any attendee to show up at least 30 minutes prior to the scheduled time of the test. Well, this should have been the easier part but unfortunately due to heavier traffic than usual I arrived only 20 minutes before time. Not too bad but more to come. The building called 'le Hub' is nicely renovated and provides the right environment for an IT group of companies like FRCI. I think they have currently 5 independent IT departments over there. Even the handling at the reception was straight forward, welcoming and at my ease. But then... first shock: "We don't have any exam registration for today." - Hm, that's nice... Here's my mail confirmation from Prometric. First attack successfully handled and the lady went off again to check their records. Next shock: A couple of minutes later, another guy tries to explain me that "the staff of the testing centre is already on vacation and the centre is officially closed." - Are you kidding me? Here's the official confirmation by Prometric, and I don't find it funny that I take a day off today only to hear this kind of blubbering nonsense. I thought that I'll be on the safe side choosing a company with a good reputation here on the island. Another 40 (!) minutes later, they finally come back to the waiting area with a pre-filled form about the test appointment. And finally, after an hour of waiting, discussing, restarting the testing PC, and lots of talk, I am allowed to sit down and take the exam. Exam details Well, you know the rules. Signing an NDA doesn't allow me to provide you any details about the questions or topics that have been covered. Please check out the official exam description, and you're on the right way. Sorry, guys... ;-) The result "Congratulations! You have passed this Microsoft Certification exam." - In general, I have to admit that the parts on HTML5 and CSS3 were the easiest after all, and that I have to get myself a little bit more familiar with certain Javascript features like class definitions, inheritance and data security. Anyway, exam passed - who cares about the details? Next goal Of course, the journey to Microsoft Certifications continues and my next goal is to pass exams 70-481 - Essentials of Developing Windows Store Apps using HTML5 and JavaScript and 70-482 - Advanced Windows Store App Development using HTML5 and JavaScript. This would allow me to achieve the certification of MCSD: Windows Store Apps using HTML5. I guess, during 2013 I'll be busy with various learning and teaching lessons.

  Read the article

• Deploying Oracle ADF Essentials Applications to Glassfish

  - by Shay Shmeltzer

  With the new Oracle ADF Essentials offering you can now deploy applications that leverage Oracle ADF on the open source Glassfish 3.1 server. Deployment is documented in the official JDeveloper and ADF documentation (here) but below is a summary of the steps and a video of the steps you'll need to take to get a basic Oracle ADF Essentials application to work on GlassFish. Note - to make starting/stopping GlassFish easier for my demo I used my GlassFish extension that you can get here. First we'll install some ADF Runtime libraries on GlassFish Download and install Glassfish (Note - if you also have an Oracle DB on the same machine, you'll want to switch GlassFish's HTTP port to something else instead of 8080). Download the Oracle ADF Essentials packaging - this will get you an adf_essentials.zip file. Copy the adf_essentials.zip to the lib directory of your Glassfish domain - on a default windows install this would be: C:\glassfish3\glassfish\domains\domain1\lib Go the the above lib directory and issue a unzip -j adf_essentials.zip This will extract the ADF libraries to the directory. Now you can start the Glassfish server. Now let's configure Glassfish to handle applications of the ADF type: Invoke the admin console of glassfish (http://localhost:4848) and log into your admin account. Go to Configurations->Server-config->JVM Settings and choose the JVM Options tab Add the following entries: -XX:MaxPermSize=512m (note this entry should already exist so just make sure it has a big enough value) -Doracle.mds.cache=simple While we are in the admin console, we can also define JDBC connections that will be used by our application. Go into Resources->JDBC->JDBC Connection Pools and click to create a New one Give it a name and choose the resource type to be javax.sql.XADataSource and choose Oracle as the Database Driver vendor. Click Next Scroll down to the Additional Properties section and start filling in the information for your database. The values for an Oracle XE will be (user=hr, databaseName = XE, Password=hr, ServerName=localhost, DriverType=thin, PortNumber=1521) Click Finish Click Ping to check your connection works. Now define a new JDBC Resource that will use the pool you just defined. In my example I called the resource jdbc/HRDS You will need this name to match the name in your Application Module connection configuraiton.Now you can re-start the Glassfish server for the changes to take effect. Get an ADF application going (you can use the regular Fusion Application template for this) Go into the project properties of your viewController project, under the deployment section click to edit the deployment profile that is defined there. Go to Platform and choose Glassfish 3.1 from the drop down list. Click ok to go back to your project. Go to Application -> Application Properties-> Deployment Go to Platform and choose Glassfish 3.1 from the drop down list. Click ok to go back to your project. This step will make sure that JDeveloper will autoamtically add the necessary ADF libraries to the EAR file that is being generated for deployment on Glassfish  Go to your Application->Deploy and deploy either to an EAR file or directly to a Glassfish server connection that you created. Things should just work, but if they don't then look up the server.log in the log directory and check out what error is in there. Here is a video demo of the various steps: Note - right now the deployment of an ADF application takes about 2 minutes on my machine we are hoping to be able to improve this timing in the future. People who are more familiar with Glassfish might want to explore using exploded directory deployment and see if they can get it to work.

  Read the article

• Documentation and Test Assertions in Databases

  - by Phil Factor

  When I first worked with Sybase/SQL Server, we thought our databases were impressively large but they were, by today’s standards, pathetically small. We had one script to build the whole database. Every script I ever read was richly annotated; it was more like reading a document. Every table had a comment block, and every line would be commented too. At the end of each routine (e.g. procedure) was a quick integration test, or series of test assertions, to check that nothing in the build was broken. We simply ran the build script, stored in the Version Control System, and it pulled everything together in a logical sequence that not only created the database objects but pulled in the static data. This worked fine at the scale we had. The advantage was that one could, by reading the source code, reach a rapid understanding of how the database worked and how one could interface with it. The problem was that it was a system that meant that only one developer at the time could work on the database. It was very easy for a developer to execute accidentally the entire build script rather than the selected section on which he or she was working, thereby cleansing the database of everyone else’s work-in-progress and data. It soon became the fashion to work at the object level, so that programmers could check out individual views, tables, functions, constraints and rules and work on them independently. It was then that I noticed the trend to generate the source for the VCS retrospectively from the development server. Tables were worst affected. You can, of course, add or delete a table’s columns and constraints retrospectively, which means that the existing source no longer represents the current object. If, after your development work, you generate the source from the live table, then you get no block or line comments, and the source script is sprinkled with silly square-brackets and other confetti, thereby rendering it visually indigestible. Routines, too, were affected. In our system, every routine had a directly attached string of unit-tests. A retro-generated routine has no unit-tests or test assertions. Yes, one can still commit our test code to the VCS but it’s a separate module and teams end up running the whole suite of tests for every individual change, rather than just the tests for that routine, which doesn’t scale for database testing. With Extended properties, one can get the best of both worlds, and even use them to put blame, praise or annotations into your VCS. It requires a lot of work, though, particularly the script to generate the table. The problem is that there are no conventional names beyond ‘MS_Description’ for the special use of extended properties. This makes it difficult to do splendid things such ensuring the integrity of the build by running a suite of tests that are actually stored in extended properties within the database and therefore the VCS. We have lost the readability of database source code over the years, and largely jettisoned the use of test assertions as part of the database build. This is not unexpected in view of the increasing complexity of the structure of databases and number of programmers working on them. There must, surely, be a way of getting them back, but I sometimes wonder if I’m one of very few who miss them.

  Read the article

• Mobile Deals: the Consumer Wants You in Their Pocket

  - by Mike Stiles

  Mobile deals offer something we talk about a lot in social marketing, relevant content. If a consumer is already predisposed to liking your product and gets a timely deal for it that’s easy and convenient to use, not only do you score on the marketing side, it clearly generates some of that precious ROI that’s being demanded of social. First, a quick gut-check on the public’s adoption of mobile. Nielsen figures have 55.5% of US mobile owners using smartphones. If young people are indeed the future, you can count on the move to mobile exploding exponentially. Teens are the fastest growing segment of smartphone users, and 58% of them have one. But the largest demographic of smartphone users is 25-34 at 74%. That tells you a focus on mobile will yield great results now, and even better results straight ahead. So we can tell both from statistics and from all the faces around you that are buried in their smartphones this is where consumers are. But are they looking at you? Do you have a valid reason why they should? Everybody likes a good deal. BIA/Kelsey says US consumers will spend $3.6 billion this year for daily deals (the Groupons and LivingSocials of the world), up 87% from 2011. The report goes on to say over 26% of small businesses are either "very likely" or "extremely likely" to offer up a deal in the next 6 months. Retail Gazette reports 58% of consumers shop with coupons, a 40% increase in 4 years. When you consider that a deal can be the impetus for a real-world transaction, a first-time visit to a store, an online purchase, entry into a loyalty program, a social referral, a new fan or follower, etc., that 26% figure shows us there’s a lot of opportunity being left on the table by brands. The existing and emerging technologies behind mobile devices make the benefits of offering deals listed above possible. Take how mobile payment systems are being tied into deal delivery and loyalty programs. If it’s really easy to use a coupon or deal, it’ll get used. If it’s complicated, it’ll be passed over as “not worth it.” When you can pay with your mobile via technologies that connects store and user, you get the deal, you get the loyalty credit, you pay, and your receipt is uploaded, all in one easy swipe. Nothing to keep track of, nothing to lose or forget about. And the store “knows” you, so future offers will be based on your tastes. Consider the endgame. A customer who’s a fan of your belt buckle store’s Facebook Page is in one of your physical retail locations. They pull up your app, because they’ve gotten used to a loyalty deal being offered when they go to your store. Voila. A 10% discount active for the next 30 minutes. Maybe the app also surfaces social references to your brand made by friends so they can check out a buckle someone’s raving about. If they aren’t a fan of your Page or don’t have your app, perhaps they’ve opted into location-based deal services so you can still get them that 10% deal while they’re in the store. Or maybe they’ve walked in with a pre-purchased Groupon or Living Social voucher. They pay with one swipe, and you’ve learned about their buying preferences, credited their loyalty account and can encourage them to share a pic of their new buckle on social. Happy customer. Happy belt buckle company. All because the brand was willing to use the tech that’s available to meet consumers where they are, incentivize them, and show them how much they’re valued through rewards.

  Read the article

• Omni-directional light shadow mapping with cubemaps in WebGL

  - by Winged

  First of all I must say, that I have read a lot of posts describing an usage of cubemaps, but I'm still confused about how to use them. My goal is to achieve a simple omni-directional (point) light type shading in my WebGL application. I know that there is a lot more techniques (like using Two-Hemispheres or Camera Space Shadow Mapping) which are way more efficient, but for an educational purpose cubemaps are my primary goal. Till now, I have adapted a simple shadow mapping which works with spotlights (with one exception: I don't know how to cut off the glitchy part beyond the reach of a single shadow map texture): glitchy shadow mapping<<< So for now, this is how I understand the usage of cubemaps in shadow mapping: Setup a framebuffer (in case of cubemaps - 6 framebuffers; 6 instead of 1 because every usage of framebufferTexture2D slows down an execution which is nicely described here <<<) and a texture cubemap. Also in WebGL depth components are not well supported, so I need to render it to RGBA first. this.texture = gl.createTexture(); gl.bindTexture(gl.TEXTURE_CUBE_MAP, this.texture); gl.texParameteri(gl.TEXTURE_CUBE_MAP, gl.TEXTURE_MIN_FILTER, gl.LINEAR); gl.texParameteri(gl.TEXTURE_CUBE_MAP, gl.TEXTURE_MAG_FILTER, gl.LINEAR); for (var face = 0; face < 6; face++) gl.texImage2D(gl.TEXTURE_CUBE_MAP_POSITIVE_X + face, 0, gl.RGBA, this.size, this.size, 0, gl.RGBA, gl.UNSIGNED_BYTE, null); gl.bindTexture(gl.TEXTURE_CUBE_MAP, null); this.framebuffer = []; for (face = 0; face < 6; face++) { this.framebuffer[face] = gl.createFramebuffer(); gl.bindFramebuffer(gl.FRAMEBUFFER, this.framebuffer[face]); gl.framebufferTexture2D(gl.FRAMEBUFFER, gl.COLOR_ATTACHMENT0, gl.TEXTURE_CUBE_MAP_POSITIVE_X + face, this.texture, 0); gl.framebufferRenderbuffer(gl.FRAMEBUFFER, gl.DEPTH_ATTACHMENT, gl.RENDERBUFFER, this.depthbuffer); var e = gl.checkFramebufferStatus(gl.FRAMEBUFFER); // Check for errors if (e !== gl.FRAMEBUFFER_COMPLETE) throw "Cubemap framebuffer object is incomplete: " + e.toString(); } Setup the light and the camera (I'm not sure if should I store all of 6 view matrices and send them to shaders later, or is there a way to do it with just one view matrix). Render the scene 6 times from the light's position, each time in another direction (X, -X, Y, -Y, Z, -Z) for (var face = 0; face < 6; face++) { gl.bindFramebuffer(gl.FRAMEBUFFER, shadow.buffer.framebuffer[face]); gl.viewport(0, 0, shadow.buffer.size, shadow.buffer.size); gl.clear(gl.COLOR_BUFFER_BIT | gl.DEPTH_BUFFER_BIT); camera.lookAt( light.position.add( cubeMapDirections[face] ) ); scene.draw(shadow.program); } In a second pass, calculate the projection a a current vertex using light's projection and view matrix. Now I don't know If should I calculate 6 of them, because of 6 faces of a cubemap. ScaleMatrix pushes the projected vertex into the 0.0 - 1.0 region. vDepthPosition = ScaleMatrix * uPMatrixFromLight * uVMatrixFromLight * vWorldVertex; In a fragment shader calculate the distance between the current vertex and the light position and check if it's deeper then the depth information read from earlier rendered shadow map. I know how to do it with a 2D Texture, but I have no idea how should I use cubemap texture here. I have read that texture lookups into cubemaps are performed by a normal vector instead of a UV coordinate. What vector should I use? Just a normalized vector pointing to the current vertex? For now, my code for this part looks like this (not working yet): float shadow = 1.0; vec3 depth = vDepthPosition.xyz / vDepthPosition.w; depth.z = length(vWorldVertex.xyz - uLightPosition) * linearDepthConstant; float shadowDepth = unpack(textureCube(uDepthMapSampler, vWorldVertex.xyz)); if (depth.z > shadowDepth) shadow = 0.5; Could you give me some hints or examples (preferably in WebGL code) how I should build it?

  Read the article

• SPTI problem with Mode Select

  - by Bob Murphy

  I'm running into a problem in which an attempt to do a "Mode Select" SCSI command using SPTI is returning an error status of 0x02 ("Check Condition"), and hope someone here might have some tips or suggestions. The code in question is intended to work with at a custom SCSI device. I wrote the original support for it using ASPI under WinXP, and am converting it to work with SPTI under 64-bit Windows 7. Here's the problematic code - and what's happening is, sptwb.spt.ScsiStatus is 2, which is a "Check Condition" error. Unfortunately, the device in question doesn't return useful information when you do a "Request Sense" after this problem occurs, so that's no help. void MSSModeSelect(const ModeSelectRequestPacket& inRequest, StatusResponsePacket& outResponse) { IPC_LOG("MSSModeSelect(): PathID=%d, TargetID=%d, LUN=%d", inRequest.m_Device.m_PathId, inRequest.m_Device.m_TargetId, inRequest.m_Device.m_Lun); int adapterIndex = inRequest.m_Device.m_PathId; HANDLE adapterHandle = prvOpenScsiAdapter(inRequest.m_Device.m_PathId); if (adapterHandle == INVALID_HANDLE_VALUE) { outResponse.m_Status = eScsiAdapterErr; return; } SCSI_PASS_THROUGH_WITH_BUFFERS sptwb; memset(&sptwb, 0, sizeof(sptwb)); #define MODESELECT_BUF_SIZE 32 sptwb.spt.Length = sizeof(SCSI_PASS_THROUGH); sptwb.spt.PathId = inRequest.m_Device.m_PathId; sptwb.spt.TargetId = inRequest.m_Device.m_TargetId; sptwb.spt.Lun = inRequest.m_Device.m_Lun; sptwb.spt.CdbLength = CDB6GENERIC_LENGTH; sptwb.spt.SenseInfoLength = 0; sptwb.spt.DataIn = SCSI_IOCTL_DATA_IN; sptwb.spt.DataTransferLength = MODESELECT_BUF_SIZE; sptwb.spt.TimeOutValue = 2; sptwb.spt.DataBufferOffset = offsetof(SCSI_PASS_THROUGH_WITH_BUFFERS,ucDataBuf); sptwb.spt.Cdb[0] = SCSIOP_MODE_SELECT; sptwb.spt.Cdb[4] = MODESELECT_BUF_SIZE; DWORD length = offsetof(SCSI_PASS_THROUGH_WITH_BUFFERS,ucDataBuf) + sptwb.spt.DataTransferLength; memset(sptwb.ucDataBuf, 0, sizeof(sptwb.ucDataBuf)); sptwb.ucDataBuf[2] = 0x10; sptwb.ucDataBuf[16] = (BYTE)0x01; ULONG bytesReturned = 0; BOOL okay = DeviceIoControl(adapterHandle, IOCTL_SCSI_PASS_THROUGH, &sptwb, sizeof(SCSI_PASS_THROUGH), &sptwb, length, &bytesReturned, FALSE); DWORD gle = GetLastError(); IPC_LOG(" DeviceIoControl() %s", okay ? "worked" : "failed"); if (okay) { outResponse.m_Status = (sptwb.spt.ScsiStatus == 0) ? eOk : ePrinterStatusErr; } else { outResponse.m_Status = eScsiPermissionsErr; } CloseHandle(adapterHandle); } A few more remarks, for what it's worth: This is derived from some old ASPI code that does the "Mode Select" flawlessly. This routine opens \\.\SCSI<whatever> at the beginning, via prvOpenScsiAdapter(), and closes the handle at the end. All the other routines for dealing with the device do the same thing, including the routine to do "Reserve Unit". Is this a good idea under SPTI, or should the call to "Reserve Unit" leave the handle open, so this routine and others in the sequence can use the same handle? This uses the IOCTL_SCSI_PASS_THROUGH. Should "Mode Select" use IOCTL_SCSI_PASS_THROUGH_DIRECT instead? Thanks in advance - any help will be greatly appreciated.

  Read the article

• Pro/con of using Angular directives for complex form validation/ GUI manipulation

  - by tengen

  I am building a new SPA front end to replace an existing enterprise's legacy hodgepodge of systems that are outdated and in need of updating. I am new to angular, and wanted to see if the community could give me some perspective. I'll state my problem, and then ask my question. I have to generate several series of check boxes based on data from a .js include, with data like this: $scope.fieldMappings.investmentObjectiveMap = [ {'id':"CAPITAL PRESERVATION", 'name':"Capital Preservation"}, {'id':"STABLE", 'name':"Moderate"}, {'id':"BALANCED", 'name':"Moderate Growth"}, // etc {'id':"NONE", 'name':"None"} ]; The checkboxes are created using an ng-repeat, like this: <div ng-repeat="investmentObjective in fieldMappings.investmentObjectiveMap"> ... </div> However, I needed the values represented by the checkboxes to map to a different model (not just 2-way-bound to the fieldmappings object). To accomplish this, I created a directive, which accepts a destination array destarray which is eventually mapped to the model. I also know I need to handle some very specific gui controls, such as unchecking "None" if anything else gets checked, or checking "None" if everything else gets unchecked. Also, "None" won't be an option in every group of checkboxes, so the directive needs to be generic enough to accept a validation function that can fiddle with the checked state of the checkbox group's inputs based on what's already clicked, but smart enough not to break if there is no option called "NONE". I started to do that by adding an ng-click which invoked a function in the controller, but in looking around Stack Overflow, I read people saying that its bad to put DOM manipulation code inside your controller - it should go in directives. So do I need another directive? So far: (html): <input my-checkbox-group type="checkbox" fieldobj="investmentObjective" ng-click="validationfunc()" validationfunc="clearOnNone()" destarray="investor.investmentObjective" /> Directive code: .directive("myCheckboxGroup", function () { return { restrict: "A", scope: { destarray: "=", // the source of all the checkbox values fieldobj: "=", // the array the values came from validationfunc: "&" // the function to be called for validation (optional) }, link: function (scope, elem, attrs) { if (scope.destarray.indexOf(scope.fieldobj.id) !== -1) { elem[0].checked = true; } elem.bind('click', function () { var index = scope.destarray.indexOf(scope.fieldobj.id); if (elem[0].checked) { if (index === -1) { scope.destarray.push(scope.fieldobj.id); } } else { if (index !== -1) { scope.destarray.splice(index, 1); } } }); } }; }) .js controller snippet: .controller( 'SuitabilityCtrl', ['$scope', function ( $scope ) { $scope.clearOnNone = function() { // naughty jQuery DOM manipulation code that // looks at checkboxes and checks/unchecks as needed }; The above code is done and works fine, except the naughty jquery code in clearOnNone(), which is why I wrote this question. And here is my question: after ALL this, I think to myself - I could be done already if I just manually handled all this GUI logic and validation junk with jQuery written in my controller. At what point does it become foolish to write these complicated directives that future developers will have to puzzle over more than if I had just written jQuery code that 99% of us would understand with a glance? How do other developers draw the line? I see this all over Stack Overflow. For example, this question seems like it could be answered with a dozen lines of straightforward jQuery, yet he has opted to do it the angular way, with a directive and a partial... it seems like a lot of work for a simple problem. Specifically, I suppose I would like to know: how SHOULD I be writing the code that checks whether "None" has been selected (if it exists as an option in this group of checkboxes), and then check/uncheck the other boxes accordingly? A more complex directive? I can't believe I'm the only developer that is having to implement code that is more complex than needed just to satisfy an opinionated framework.

  Read the article

• How can I best implement 'cache until further notice' with memcache in multiple tiers?

  - by ajreal

  the term "client" used here is not referring to client's browser, but client server Before cache workflow 1. client make a HTTP request --> 2. server process --> 3. store parsed results into memcache for next use (cache indefinitely) --> 4. return results to client --> 5. client get the result, store into client's local memcache with TTL After cache workflow 1. another client make a HTTP request --> 2. memcache found return memcache results to client --> 3. client get the result, store into client's local memcache with TTL TTL = time to live Is possible for me to know when the data was updated, and to expire relevant memcache(s) accordingly. However, the pitfalls on client site cache TTL Any data update before the TTL is not pick-up by client memcache. In reverse manner, where there is no update, client memcache still expire after the TTL First request (or concurrent requests) after cache TTL will get throttle as it need to repeat the "Before cache workflow" In the event where client require several HTTP requests on a single web page, it could be very bad in performance. Ideal solution should be client to cache indefinitely until further notice. Here are the three proposals about futher notice Proposal 1 : Make use on HTTP header (current implementation) 1. client sent HTTP request last modified time header 2. server check if last data modified time=last cache time return status 304 3. client based on header to decide further processing GOOD? ---- - save some parsing for client - lesser data transfer BAD? ---- - fire a HTTP request is still slow - server end still need to process lots of requests Proposal 2 : Consistently issue a HTTP request to check all data group last modified time 1. client fire a HTTP request 2. server to return last modified time for all data group 3. client compare local last cache time with the result 4. if data group last cache time < server last modified time then request again for that data group only GOOD? ---- - only fetch what is no up-to-date - less requests for server BAD? ---- - every web page require a HTTP request Proposal 3 : Tell client when new data is available (Push) 1. when server end notice there is a change on a data group 2. notify clients on the changes 3. help clients to fetch again data 4. then reset client local memcache after data is parsed GOOD? ---- - let the cache act/behave like a true cache BAD? ---- - encourage race condition My preference is on proposal 3, and something like Gearman could be ideal Where there is a change, Gearman server to sent the task to multiple clients (workers). Am I crazy? (I know my first question is a bit crazy)

  Read the article

< Previous Page | 232 233 234 235 236 237 238 239 240 241 242 243  | Next Page >