Search Results

Search found 18319 results on 733 pages for 'reference parameters'.

Page 236/733 | < Previous Page | 232 233 234 235 236 237 238 239 240 241 242 243  | Next Page >

• CreateThread() fails on 64 bit Windows, works on 32 bit Windows. Why?

  - by Stephen Kellett

  Operating System: Windows XP 64 bit, SP2. I have an unusual problem. I am porting some code from 32 bit to 64 bit. The 32 bit code works just fine. But when I call CreateThread() for the 64 bit version the call fails. I have three places where this fails. 2 call CreateThread(). 1 calls beginthreadex() which calls CreateThread(). All three calls fail with error code 0x3E6, "Invalid access to memory location". The problem is all the input parameters are correct. HANDLE h; DWORD threadID; h = CreateThread(0, // default security 0, // default stack size myThreadFunc, // valid function to call myParam, // my param 0, // no flags, start thread immediately &threadID); All three calls to CreateThread() are made from a DLL I've injected into the target program at the start of the program execution (this is before the program has got to the start of main()/WinMain()). If I call CreateThread() from the target program (same params) via say a menu, it works. Same parameters etc. Bizarre. If I pass NULL instead of &threadID, it still fails. If I pass NULL as myParam, it still fails. I'm not calling CreateThread from inside DllMain(), so that isn't the problem. I'm confused and searching on Google etc hasn't shown any relevant answers. If anyone has seen this before or has any ideas, please let me know. Thanks for reading.

  Read the article

• Explanation of `self` usage during dealloc?

  - by Greg

  I'm trying to lock down my understanding of proper memory management within Objective-C. I've gotten into the habit of explicitly declaring self.myProperty rather than just myProperty because I was encountering occasional scenarios where a property would not be set to the reference that I intended. Now, I'm reading Apple documentation on releasing IBOutlets, and they say that all outlets should be set to nil during dealloc. So, I put this in place as follows and experienced crashes as a result: - (void)dealloc { [self.dataModel close]; [self.dataModel release], self.dataModel = nil; [super dealloc]; } So, I tried taking out the "self" references, like so: - (void)dealloc { [dataModel close]; [dataModel release], dataModel = nil; [super dealloc]; } This second system seems to work as expected. However, it has me a bit confused. Why would self cause a crash in that case, when I thought self was a fairly benign reference more used as a formality than anything else? Also, if self is not appropriate in this case, then I have to ask: when should you include self references, and when should you not?

  Read the article

• Problem with passing vector of pointers to objects to member function of another object

  - by Jamesz

  Hi, I have a vector of pointers to Mouse objects called 'mice'. I'm passing the mice to the cat by reference. vector <Mouse*> mice; Cat * c; c->lookForMouse(&mice); And here's my lookForMouse() member function void Cat::lookForMouse(vector <Mouse*> *mice) { ... } And now to the problem! Within the function above, I can't seem to access my mice. This below will not work mice[i]->isActive(); The error message I receive suggests to use mice[i].isActive(), but this throws an error saying isActive() is not a member of std::vector<_Ty ... This works though... vector <Mouse*> miceCopy = *mice; miceCopy[i]->isActive(); I understand that I shouldn't be creating another vector of mice here, it defeats the whole point of passing it by reference (let me know if I'm wrong)... Why can't I do mice[i]-isActive() What should I be doing? Thanks for your time and help :D James.

  Read the article

• build SQL query string using user input

  - by user175084

  i have to make a string by using the values which the user selects on the webpage suppose i need to display files for multiple machines with differnt search criteria.. i currently use this code: DataTable dt = new DataTable(); SqlConnection connection = new SqlConnection(); connection.ConnectionString = ConfigurationManager.ConnectionStrings["DBConnectionString"].ConnectionString; connection.Open(); SqlCommand sqlCmd = new SqlCommand("SELECT FileID FROM Files WHERE MachineID=@machineID and date= @date", connection); SqlDataAdapter sqlDa = new SqlDataAdapter(sqlCmd); sqlCmd.Parameters.AddWithValue("@machineID", machineID); sqlCmd.Parameters.AddWithValue("@date", date); sqlDa.Fill(dt); now this is fixed query where the user just has one machine and just selects one date... i want to make a query in which the user has multiple search options like type or size if he wants depending on what he selects also if he can select multiple machines.. SELECT FileID FROM Files WHERE (MachineID=@machineID1 or MachineID = @machineID2...) and (date= @date and size=@size and type=@type... ) all of this happens in runtime... other wise i have to create a for loop to put multiple machines one by one... and have multiple queries depending on the case the user selected... this is quiet interesting and i could use some help... thanks

  Read the article

• Rendering maps from raw SVG data in Java

  - by Lunikon

  In an application of mine I have to display locations and great circle paths in a map which is rendered to PNG and then displayed on the web. For this I simply use a world map (NASA's Blue Marbel in fact) scaled to various "zoom levels" as base image and only display the a part of it matching the final image size and fitting all items to be displayed. Straight forward so far. Now I came across Wikipedia's awesome blank SVG maps which contain all the country codes for easy reference and I was wondering whether it was possible to use those to have more customized colors and to highliht countries etc. So I did a bit of googling and was looking for Java libraries which would enable me to load the blank SVG map to memory allows for easy reference/selection of certain paths do manipulations of coloring, stroke widths etc render to a buffered image as the background for the great-circle paths/nodes What I came across quite often was Batik, but it looks like a really heavy framework and I'm not quite sure whether it is what I'm looking for. I have recently played around with Raphaël a bit and I like the way it handles working with vector graphics in code. If the Java framework for my purpose would feature a similar interface, that would be a nice-to-have. Any recommendations what toolset would be approriate for my purposes?

  Read the article

• MS SQL find and replace in TEXT field

  - by incubushead

  I have a database in MS SQL 2005 that was brought up from SQL 2000 and is still using TEXT type fields instead of varchar(max). I need to find and replace a string of characters in the text field but all of the examples of how to do this that I have found don't seem like they would work for me. It seems the UPDATETEXT command requires that the two parameters "insert_offset" and "delete_length" be set explicitly but the string i am searching for could show up in the text at any point or even at several points in the same cell. My understanding of these two parameters is that the string im searching for will always be in the same place, so that insert_offset is the number of spaces into the text that the UPDATETEXT command will start replacing text. Example: Need to find: &lt;u&gt; and Replace it with: <u> Text field example: *Everyone in the room was <b>&lt;u&gt;tired&lt;/u&gt;.</b><br>Then they woke <b>&lt;u&gt;up&lt;/u&gt;. Can anyone help me out with this? THANKS!

  Read the article

• gluLookAt alternative doesn't work

  - by Brammie

  Hey guys. I'm trying to calculate a lookat matrix myself, instead of using gluLookAt(). My problem is that my matrix doesn't work. using the same parameters on gluLookAt does work however. my way of creating a lookat matrix: Vector3 Eye, At, Up; //these should be parameters =) Vector3 zaxis = At - Eye; zaxis.Normalize(); Vector3 xaxis = Vector3::Cross(Up, zaxis); xaxis.Normalize(); Vector3 yaxis = Vector3::Cross(zaxis, xaxis); yaxis.Normalize(); float r[16] = { xaxis.x, yaxis.x, zaxis.x, 0, xaxis.y, yaxis.y, zaxis.y, 0, xaxis.z, yaxis.z, zaxis.z, 0, 0, 0, 0, 1, }; Matrix Rotation; memcpy(Rotation.values, r, sizeof(r)); float t[16] = { 1, 0, 0, 0, 0, 1, 0, 0, 0, 0, 1, 0, -Eye.x, -Eye.y, -Eye.z, 1, }; Matrix Translation; memcpy(Translation.values, t, sizeof(t)); View = Rotation * Translation; // i tried reversing this as well (translation*rotation) now, when i try to use this matrix be calling glMultMatrixf, nothing shows up in my engine, while using the same eye, lookat and up values on gluLookAt works perfect as i said before. glMatrixMode(GL_MODELVIEW); glLoadIdentity(); glMultMatrixf(View); the problem must be in somewhere in the code i posted here, i know the problem is not in my Vector3/Matrix classes, because they work fine when creating a projection matrix.

  Read the article

• Using Maven for maintaining product documentation

  - by Waldheinz

  We are using Maven for building a Java server-style application. It consists of several modules (in a single Maven "reactor") which can be plugged together to generate a final product (essentially a .jar) with the features enabled that the customer needs. All the internals are documented using JavaDoc and all, but that's not what you can give to the customer to find out how to get the thing running. Currently we have an OpenOffice document which serves as end-user documentation. I'd like to integrate this documentation into the Maven build process where each module's documentation is maintained (hand-edited) together with the Module's sources and the final document can reference the required Module documentation sections, add some friendly foreword and, if possible at all, can reference into the JavaDocs. Ultimately, the document should be output as a PDF. Is there any experience on Maven plugins can help with this? Is DocBook the right tool? Maybe Latex? Or something completely different? A sound "stick with OpenOffice and some text blocks" could be an answer, too.

  Read the article

• Multiple usage of MenuItems declared once (WPF)

  - by Alex Kofman

  Is it possible in WPF to define some menu structure and than use it in multiple contexts? For example I'd like to use a set of menu items from resources in ContextMenu, Window's menu and ToolBar (ToolBar with icons only, without headers). So items order, commands, icons, separators must be defined just once. I look for something like this: Declaration in resources: <MenuItem Command="MyCommands.CloneObject" CommandParameter="{Binding SelectedObject}" Header="Clone"> <MenuItem.Icon> <Image Source="Images\Clone.png" Height="16" Width="16"></Image> </MenuItem.Icon> </MenuItem> <MenuItem Command="MyCommands.RemoveCommand" CommandParameter="{Binding SelectedObject}" Header="Remove"> <MenuItem.Icon> <Image Source="Images\Remove.png" Height="16" Width="16"></Image> </MenuItem.Icon> </MenuItem> <Separator/> <MenuItem Command="MCommands.CreateChild" CommandParameter="{Binding SelectedObject}" Header="Create child"> <MenuItem.Icon> <Image Source="Images\Child.png" Height="16" Width="16"></Image> </MenuItem.Icon> </MenuItem> Usage: <ToolBar MenuItems(?)="{Reference to set of items}" ShowText(?)="false" /> and <ContextMenu MenuItems(?)="{Reference to set of items}" />

  Read the article

• winUserControl in VS2010 - properties are not visible in designer

  - by mj82

  I have a problem with (I suppose) my Visual Studio 2010 Express environment: when I design my own UserControl, in Properties grid I can't see public properties of that control. They are however visible in the project, that reference this control. As it's Express Edition, I create new empty project, then add new UserControl to it. Then, for a test, I put following code: using System; using System.Collections.Generic; using System.ComponentModel; using System.Drawing; using System.Data; using System.Linq; using System.Text; using System.Windows.Forms; namespace Project1 { public partial class UserControl1 : UserControl { private int myNumber; [Browsable(true)] public int MyNumber { get { return myNumber; } set { myNumber = value; } } public UserControl1() { InitializeComponent(); } } } In VS 2008, as I remember, that should be enogh to show MyNumber property in Properties grid, even without [Browsable(true)] attribute. In VS 2010 however, when I double click UserControl1.cs in Solution Explorer and look in Properties, I don't see MyNumber. When I reference and use this control in another project, there is an access to it's properties. I've tried to competly reinstall VS 2010 environment, including SP1, but with no success. Do you have any idea what can be wrong? By the way: none of these attributes are working, either: [Browsable(true)] [EditorBrowsable(EditorBrowsableState.Always)] [DesignerSerializationVisibility(DesignerSerializationVisibility.Content)] [Bindable(true)] Best regards, Marcin

  Read the article

• Request for advice about class design, inheritance/aggregation

  - by Lasse V. Karlsen

  I have started writing my own WebDAV server class in .NET, and the first class I'm starting with is a WebDAVListener class, modelled after how the HttpListener class works. Since I don't want to reimplement the core http protocol handling, I will use HttpListener for all its worth, and thus I have a question. What would the suggested way be to handle this: Implement all the methods and properties found inside HttpListener, just changing the class types where it matters (ie. the GetContext + EndGetContext methods would return a different class for WebDAV contexts), and storing and using a HttpListener object internally Construct WebDAVListener by passing it a HttpListener class to use? Create a wrapper for HttpListener with an interface, and constrct WebDAVListener by passing it an object implementing this interface? If going the route of passing a HttpListener (disguised or otherwise) to the WebDAVListener, would you expose the underlying listener object through a property, or would you expect the program that used the class to keep a reference to the underlying HttpListener? Also, in this case, would you expose some of the methods of HttpListener through the WebDAVListener, like Start and Stop, or would you again expect the program that used it to keep the HttpListener reference around for all those things? My initial reaction tells me that I want a combination. For one thing, I would like my WebDAVListener class to look like a complete implementation, hiding the fact that there is a HttpListener object beneath it. On the other hand, I would like to build unit-tests without actually spinning up a networked server, so some kind of mocking ability would be nice to have as well, which suggests I would like the interface-wrapper way. One way I could solve this would be this: public WebDAVListener() : WebDAVListener(new HttpListenerWrapper()) { } public WebDAVListener(IHttpListenerWrapper listener) { } And then I would implement all the methods of HttpListener (at least all those that makes sense) in my own class, by mostly just chaining the call to the underlying HttpListener object. What do you think? Final question: If I go the way of the interface, assuming the interface maps 1-to-1 onto the HttpListener class, and written just to add support for mocking, is such an interface called a wrapper or an adapter?

  Read the article

• return Queryable<T> or List<T> in a Repository<T>

  - by Danny Chen

  Currently I'm building an windows application using sqlite. In the data base there is a table say User, and in my code there is a Repository<User> and a UserManager. I think it's a very common design. In the repository there is a List method: //Repository<User> class public List<User> List(where, orderby, topN parameters and etc) { //query and return } This brings a problem, if I want to do something complex in UserManager.cs: //UserManager.cs public List<User> ListUsersWithBankAccounts() { var userRep = new UserRepository(); var bankRep = new BankAccountRepository(); var result = //do something complex, say "I want the users live in NY //and have at least two bank accounts in the system } You can see, returning List<User> brings performance issue, becuase the query is executed earlier than expected. Now I need to change it to something like a IQueryable<T>: //Repository<User> class public TableQuery<User> List(where, orderby, topN parameters and etc) { //query and return } TableQuery<T> is part of the sqlite driver, which is almost equals to IQueryable<T> in EF, which provides a query and won't execute it immediately. But now the problem is: in UserManager.cs, it doesn't know what is a TableQuery<T>, I need to add new reference and import namespaces like using SQLite.Query in the business layer project. It really brings bad code feeling. Why should my business layer know the details of the database? why should the business layer know what's SQLite? What's the correct design then?

  Read the article

• How can I make one Maven module depend on another?

  - by Daniel Pryden

  OK, I thought I understood how to use Maven... I have a master project M which has sub-projects A, B, and C. C contains some common functionality (interfaces mainly) which is needed by A and B. I can run mvn compile jar:jar from the project root directory (the M directory) and get JAR files A.jar, B.jar, and C.jar. (The versions for all these artifacts are currently 2.0-SNAPSHOT.) The master pom.xml file in the M directory lists C under its <dependencyManagement> tag, so that A and B can reference C by just including a reference, like so: <dependency> <groupId>my.project</groupId> <artifactId>C</artifactId> </dependency> So far, so good. I can run mvn compile from the command line and everything works fine. But when I open the project in NetBeans, it complains with the problem: "Some dependency artifacts are not in the local repository", and it says the missing artifact is C. Likewise from the command line, if I change into the A or B directories and try to run mvn compile I get "Build Error: Failed to resolve artifact." I expect I could manually go to where my C.jar was built and run mvn install:install-file, but I'd rather find a solution that enables me to just work directly in NetBeans (and/or in Eclipse using m2eclipse). What am I doing wrong?

  Read the article

• Writing functions of tuples conveniently in Scala

  - by Alexey Romanov

  Quite a few functions on Map take a function on a key-value tuple as the argument. E.g. def foreach(f: ((A, B)) ? Unit): Unit. So I looked for a short way to write an argument to foreach: > val map = Map(1 -> 2, 3 -> 4) map: scala.collection.immutable.Map[Int,Int] = Map(1 -> 2, 3 -> 4) > map.foreach((k, v) => println(k)) error: wrong number of parameters; expected = 1 map.foreach((k, v) => println(k)) ^ > map.foreach({(k, v) => println(k)}) error: wrong number of parameters; expected = 1 map.foreach({(k, v) => println(k)}) ^ > map.foreach(case (k, v) => println(k)) error: illegal start of simple expression map.foreach(case (k, v) => println(k)) ^ I can do > map.foreach(_ match {case (k, v) => println(k)}) 1 3 Any better alternatives?

  Read the article

• Creating object/array to method in request based on __gettypes in PHP

  - by LochNess

  I'm having trouble with the array or object that should be passed based on the response from __gettypes. The __gettypes response: [0] => struct CDataWrapper { schema;any; } [1] => struct NewMember { MemberDetail MemberDetails;ArrayOfHobby Hobbies; } [2] => struct MemberDetail { string Name; string Age; string Sex; } [3] => struct ArrayOfHobby { Hobby Hobby; } [4] => struct Hobby { string Name; string HoursUsedOnHobbyWeekly;boolean Favourite; } ... etc. The methods are: [0] => ReceiveMemberResponse ReceiveMember(ReceiveMember $parameters) [1] => ReturnMemberResponse ReturnMember(ReturnMember $parameters) So far I have this PHP: $client = new SoapClient('http://domain.com?wsdl'); class MemberDetail { public $Name = ''; public $Age = ''; public $Sex = ''; } $mc = new MemberDetail(); $mc->Name= 'Bob'; $mc->Age= '14'; $mc->Sex= 'Male'; $myParam = array('ReceiveMember'=>$mc); $wcf = $client->ReceiveMember($myParam); $wcfResult = $wcf->ReturnMember; print_r($wcfResult) when i call the page it returns: Error 324 (net::ERR_EMPTY_RESPONSE): Unknown error. I'm not really sure how to create the array or object to pass on as $myParam since im no expert with PHP either.

  Read the article

• How to pass common arguments to Perl modules

  - by Leonard

  I'm not thrilled with the argument-passing architecture I'm evolving for the (many) Perl scripts that have been developed for some scripts that call various Hadoop MapReduce jobs. There are currently 8 scripts (of the form run_something.pl) that are run from cron. (And more on the way ... we expect anywhere from 1 to 3 more for every function we add to hadoop.) Each of these have about 6 identical command-line parameters, and a couple command line parameters that are similar, all specified with Euclid. The implementations are in a dozen .pm modules. Some of which are common, and others of which are unique.... Currently I'm passing the args globally to each module ... Inside run_something.pl I have: set_common_args (%ARGV); set_something_args (%ARGV); And inside Something.pm I have sub set_something_args { (%MYARGS) =@_; } So then I can do if ( $MYARGS{'--needs_more_beer'} ) { $beer++; } I'm seeing that I'm probably going to have additional "common" files that I'll want to pass args to, so I'll have three or four set_xxx_args calls at the top of each run_something.pl, and it just doesn't seem too elegant. On the other hand, it beats passing the whole stupid argument array down the call chain, and choosing and passing individual elements down the call chain is (a) too much work (b) error-prone (c) doesn't buy much. In lots of ways what I'm doing is just object-oriented design without the object-oriented language trappings, and it looks uglier without said trappings, but nonetheless ... Anyone have thoughts or ideas?

  Read the article

• Re-add missing project without having to re-add it to all projects referencing it

  - by coffeeaddict

  Lets say you open a .NET solution (mine being VS 2010) after you just moved your entire folder to some new location locally. Now one of the projects that was being referenced in that solution is not there and so when you launch VS, it naturally tells you that the project is missing and therefore as always you see the project greyed out in Solution Explorer. Ok, well I can't go re-add that project (specify a different path for where that project lives) unless I remove the missing project reference and then try to re-add it back to the solution. But how can I reassociate a project without losing all references in other projects that were referencing that missing project? Is this possible? Otherwise every time I re-add that missing project, I end up having to go through about 8 projects of mine that are referencing it and re-reference it for each one of those projects which is tedious. I guess it makes sense since each project was referencing that missing project at that old path so it would break it there as well but is there an easier way to re-associate a project and references to that missing project without having to take 10 minutes every time to re-associate it all over the place if simply the path has changed?

  Read the article

• jQuery Grouping Similar Items and Counting When Repeated

  - by NessDan

  So I have this structure setup: <ul> <li>http://www.youtube.com/watch?v=dw1Vh9Yzryo</li> (Vid1) <li>http://www.youtube.com/watch?v=bOF3o8B292U</li> (Vid2) <li>http://www.youtube.com/watch?v=yAY4vNJd7A8</li> (Vid3) <li>http://www.youtube.com/watch?v=yAY4vNJd7A8</li> <li>http://www.youtube.com/watch?v=dw1Vh9Yzryo</li> <li>http://www.youtube.com/watch?v=bOF3o8B292U</li> <li>http://www.youtube.com/watch?v=yAY4vNJd7A8</li> <li>http://www.youtube.com/watch?v=dw1Vh9Yzryo</li> </ul> Vid1 is repeated 3 times, Vid2 is repeated 3 times, and Vid3 is repeated 2 times. I want to put them into a structure where I can reference them like this: Vid1 - 3 (Repeated), http://www.youtube.com/get_video?video_id=dw1Vh9Yzryo&fmt=36 (Download) Vid2 - 3 (Repeated), http://www.youtube.com/get_video?video_id=bOF3o8B292U&fmt=36 (Download) Vid3 - 2 (Repeated), http://www.youtube.com/get_video?video_id=yAY4vNJd7A8&fmt=36 (Download) "This video was repeated " + [Vid1][Repeated] + " times and you can download it here: " + [Vid1][Download]; How can I set this structure up? I think I should be using an array to achieve the above but I'm not sure how I would set it up or how to reference certain things in the array. The other question is how can I get how many times something was repeated? The URL I have no problem with. Can anyone help me out?

  Read the article

• Mapping individual buttons on ASP.NET MVC View to controller actions

  - by skb

  I have an application where I need the user to be able to update or delete rows of data from the database. The rows are displayed to the user using a foreach loop in the .aspx file of my view. Each row will have two text fields (txtName, txtDesc), an update button, and a delete button. What I'm not sure of, is how do I have the update button send the message to the controller for which row to update? I can see a couple way of doing this: Put each row within it's own form tag, then when the update button is clicked, it will submit the values for that row only (there will also be a hidden field with the rowId) and the controller class would take all the post values as parameters to the Update method on the controller. Somehow, have the button be scripted in a way to send back only the values for that row with a POST to the controller. Is there a way of doing this? One thing I am concerned about is if each row has different names for it's controls assigned by ASP.NET (txtName1, txtDesc1, txtName2, txtDesc2), then how will their values get mapped to the correct parameters of the Controller method?

  Read the article

• Can Win32_NetworkAdapterConfiguration.EnableStatic() be used to set more than one IP address?

  - by Andrew J. Brehm

  I ran into this problem in a Visual Basic program that uses WMI but could confirm it in PowerShell. Apparently the EnableStatic() method can only be used to set one IP address, despite taking two parameters IP address(es) and subnetmask(s) that are arrays. I.e. $a=get-wmiobject win32_networkadapterconfiguration -computername myserver This gets me an array of all network adapters on "myserver". After selecting a specific one ($a=$a[14] in this case), I can run $a.EnableStatic() which has this signature System.Management.ManagementBaseObject EnableStatic(System.String[] IPAddress, System.String[] SubnetMask) I thought this implies that I could set several IP addresses like this: $ips="192.168.1.42","192.168.1.43" $a.EnableStatic($ips,"255.255.255.0") But this call fails. However, this call works: $a.EnableStatic($ips[0],"255.255.255.0") It looks to me as if EnableStatic() really takes two strings rather than two arrays of strings as parameters. In Visual Basic it's more complicated and arrays must be passed but the method appears to take into account only the first element of each array. Am I confused again or is there some logic here?

  Read the article

• Updating iOS application content which include images

  - by azamsharp

  I am working on a Vegetable gardening application. Apart from the vegetable name and description I also have vegetable image. Currently, I have all the images in the Supported Files folder in the Xcode project. But later on I want to update the application dynamically without having the user download a new version. When the user updates the application or downloads new data from the server that data will include the images. Can I store those images in the supporting file folder or somewhere where they can be references by just the name. RELATED QUESTION: I will also allow the user to take pictures of their vegetables and then write notes about the vegetables like "just planted", "about to harvest" etc. What is the recommended approach for storing pictures/photos. I can always store them in the user's photo library and then store the reference in the local database and then fetch and display the picture using the reference. The problem with that approach might be that if the user accidentally deletes the picture from the library then it will no longer be displayed in my application. The only way I see if to store the picture in the app local database as a BLOB.

  Read the article

• Why ng-hide don't work with custom directives?

  - by javier

  I'm reading the directives section of the developers guide on angularjs.org to refresh my knowledge and gain some insights and I was trying to run one of the examples but the directive ng-hide is not working on a custom directive. Here the jsfiddle: http://jsfiddle.net/D3Nsk/: <my-dialog ng-hide="dialogIsHidden" on-close="hideDialog()"> Does Not Work Here!!! </my-dialog> <div ng-hide="dialogIsHidden"> It works Here. </div> Any idea on why this is happening? Thanks. solution Seems that the variable dialogIsHidden on the tag already make a reference to a scope variable inside the directive and not to the variable in the controller; given that the directive has it's own insolated scope, to make this work it's necesary to pass by reference the variable dialogIsHidden of the controller to the directive. Here the jsfiddle: http://jsfiddle.net/h7xvA/ changes at: <my-dialog ng-hide="dialogIsHidden" on-close="hideDialog()" dialog-is-hidden='dialogIsHidden'> and: scope: { 'close': '&onClose', 'dialogIsHidden': '=' },

  Read the article

• Conversion failed when converting datetime from character string

  - by salvationishere

  I am developing a C# VS 2008 / SQL Server 2005 Express website application. I have tried some of the fixes for this problem but my call stack differs from others. And these fixes did not fix my problem. What steps can I take to troubleshoot this? Here is my error: System.Data.SqlClient.SqlException was caught Message="Conversion failed when converting datetime from character string." Source=".Net SqlClient Data Provider" ErrorCode=-2146232060 LineNumber=10 Number=241 Procedure="AppendDataCT" Server="\\\\.\\pipe\\772EF469-84F1-43\\tsql\\query" State=1 StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at ADONET_namespace.ADONET_methods.AppendDataCT(DataTable dt, Dictionary`2 dic) in c:\Documents and Settings\Admin\My Documents\Visual Studio 2008\WebSites\Jerry\App_Code\ADONET methods.cs:line 102 And here is the related code. When I debugged this code, "dic" only looped through the 3 column names, but did not look into row values which are stored in "dt", the Data Table. public static string AppendDataCT(DataTable dt, Dictionary<string, string> dic) { if (dic.Count != 3) throw new ArgumentOutOfRangeException("dic can only have 3 parameters"); string connString = ConfigurationManager.ConnectionStrings["AW3_string"].ConnectionString; string errorMsg; try { using (SqlConnection conn2 = new SqlConnection(connString)) { using (SqlCommand cmd = conn2.CreateCommand()) { cmd.CommandText = "dbo.AppendDataCT"; cmd.CommandType = CommandType.StoredProcedure; cmd.Connection = conn2; foreach (string s in dic.Keys) { SqlParameter p = cmd.Parameters.AddWithValue(s, dic[s]); p.SqlDbType = SqlDbType.VarChar; } conn2.Open(); cmd.ExecuteNonQuery(); conn2.Close(); errorMsg = "The Person.ContactType table was successfully updated!"; } } }

  Read the article

• How can I get my business objects layer to use the management layer in their methods?

  - by Tom Pickles

  I have a solution in VS2010 with several projects, each making up a layer within my application. I have business entities which are currently objects with no methods, and I have a management layer which references the business entities layer in it's project. I now think I have designed my application poorly and would like to move methods from helper classes (which are in another layer) into methods I'll create within the business entities themselves. For example I have a VirtualMachine object, which uses a helper class to call a Reboot() method on it which passes the request to the management layer. The static manager class talks to an API that reboots the VM. I want to move the Reboot() method into the VirtualMachine object, but I will need to reference the management layer: public void Reboot() { VMManager.Reboot(this.Name); } So if I add a reference to my management project in my entities project, I get the circular dependency error, which is how it should be. How can I sort this situation out? Do I need to an yet another layer between the entity layer and the management layer? Or, should I just forget it and leave it as it is. The application works ok now, but I am concerned my design isn't particularly OOP centric and I would like to correct this.

  Read the article

• asp.net stored procedure problem

  - by kenom

  Why this code don't work,when i want run this code vwd 2008 express show me this error message:Invalid object name 'answers'. this is my ascx.cs code: using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Data; using System.Web.UI; using System.Web.UI.WebControls; using System.Web.Security; using System.Data.SqlClient; using System.Configuration; public partial class odgl : System.Web.UI.UserControl { protected void Page_Load(object sender, EventArgs e) { string connectionString = @"SANATIZEDSTRING!!!!"; using (SqlConnection cn = new SqlConnection(connectionString)) { using (SqlCommand dohvati = new SqlCommand("dbo.get_answers",cn)) { dohvati.CommandType = CommandType.StoredProcedure; SqlParameter izracun = new SqlParameter("@count", SqlDbType.Int); izracun.Direction = ParameterDirection.Output; dohvati.Parameters.Add(izracun); cn.Open(); dohvati.ExecuteNonQuery(); int count = Int32.Parse(dohvati.Parameters["@count"].Value.ToString()); Response.Write(count.ToString()); cn.Close(); } } } } and this is my stored procedure : set ANSI_NULLS ON set QUOTED_IDENTIFIER ON GO ALTER procedure [dbo].[get_answers] @ukupno int output as select @count= (SELECT COUNT(*) FROM answers) go

  Read the article

< Previous Page | 232 233 234 235 236 237 238 239 240 241 242 243  | Next Page >