Search Results

Search found 7740 results on 310 pages for 'split sound'.

Page 236/310 | < Previous Page | 232 233 234 235 236 237 238 239 240 241 242 243  | Next Page >

• laptop motherboard "shorts" when connected to adapter

  - by Bash

  Disclaimer: I'm sort of a noob, and this is a long post. Thank you all in advance! summary: completely dead laptop with no signs of life whatsoever (suddenly, for no apparent reason) Here's the deal: Lenovo Y470 (only a few months old with no water or shock damage). It stopped working suddenly (no lights, no sound, even when connecting adapter with or without battery). I tried a different adapter (same electrical rating), but no luck. I disassembled the thing completely, and tried plugging in the adapter and looking for signs of life with all different combinations of components installed (tried all combinations of RAM, CPU, USB power cords, screen, etc plugged in). no luck. Then, I noticed (as I was plugging in the adapter to try for the millionth time) that there was a "spark" for an instant when I first connect the adapter to the power jack. The adapter's LED would then flash (indicating it isn't working or charging). So, I thought the power jack has a short of some sort (due to bad soldering or something). Scanned virtually every single component on the motherboard, and tested the power jack connections with a multimeter. No shorts or damage to anything on the entire motherboard. Now I'm thinking I need to replace the motherboard. But, my actual question: What does this "shorting" when connecting the adapter signify? (btw, the voltage across the power connections and current through it drop to virtually zero when the adapter is connected and "sparks", and they stay that way). The bewildering thing is that there are no damaged components, and the voltage across adapter terminals returns to normal after I disconnect it (so it's not damaged). Please take a look at the pictures (of the motherboard's power connection and nearby components) and see if I'm missing something completely obvious... Links to pictures and laptop and motherboard model: pictures on DropBox Motherboard model: LA-6881P Laptop model: Lenovo IdeaPad Y470

  Read the article

• Kernel panic while loading Mac OS X on VMWare

  - by Vladimir Gritsenko

  I'm trying to run Mac OS X 10.6.3 on VMWare 7.1 from within Windows 7 64 bit. Trying to run the OS X doesn't work - shortly after booting VMWare announces the machine's death with this pop-up message: The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point. The console has a more interesting announcement: The real-time clock was not properly initialized on your system! With a dump of the detected CPU speed (~2.9 GHz), FSB (~94 MHz) and bus ratio (31). Somehow, the code that panics is documented in an accidental .diff file here. Apparently, it commits seppuku if the bus ratio is greater than 30. I underclocked my E6500 to a slower speed, but this apparently didn't make any difference. I can think of two possibilities right now: The CPU info being read is constant, and defines the maximum ability of the CPU. In which case it appears I'm screwed. VMWare presents its own CPU info to the machine, which I can perhaps somehow change. If so, how? If these sound completely off, that's because I'm a real newbie in these matters. Here's hoping you guys can show me the light :-)

  Read the article

• Exim 4 Virtual Domains and Catchall on Debian (Squeeze)

  - by parazuce

  Hello, I've been at it for about 4 hours now. Searching as well as trying different tutorials. Here's my setup: I have 2 domains, both under my own DNS server (MX records setup as well). I have exim4 successfully running, and it is able to send messages from both of those domains. I have tested this using sendmail, and manually setting the "From" attribute. Exim successfully delivers mail to users no matter which domain was specified. I'm fine with that, but I'm having an issue editing virtual domains, and adding custom delivery options (such as a catch all). I've been searching for about 4 hours, and I can't find any up-to-date documentation on how to do this. The old methods would be to add a line such as: domainlist local_domains = @:localhost:dsearch;/etc/exim4/virtual Once that line was added, I made a directory at /etc/exim4/virtual, then created files inside such as example.com which would then contain rules for delivery under that domain. This did not work, however. Searching further, I've found that exim no longer supports dsearch (I guess because they claim it never has?) This is where I'm stuck. I'm on a "split" configuration as well.

  Read the article

• New Computer freezing up at random

  - by Benjamin Frost

  Since I built my system about 4 weeks ago I'v been getting random freezes, Sometimes it can happen directly after startup and sometimes it wont freeze up for 3-4 days of 24/7 running. It seems to be happening under all stress loads but mainly when the CPU is under 10% load. It doesn't give me a BSOD or anything, it simply just freezes and repeats the last sound before the freeze until I shut it down by the power button. I'v re-seated everything in the system except the CPU, Cleaned the RAM sockets and gold fittings. None of the components have been clocked above their factory settings as of yet, don't want to overclock them until I sort out these freezes. Temps are all well under the rated max temps, the highest the temps have been are below CPU: Low load: 16-21°C Full Load (100%) 40-43°C *(From HWMonitor by CPUID) GPU 1: Low Load: 25-30°C Full Load (100%): 45-50°C GPU 2: Low Load: 23-27°C Full Load (100%): 45-50°C *(GPU Temps from Catalyst Control Center) General Case temps Rear: 18-20°C Mid: 20-21°C Front (HDD/SSD Bays): 14-19°C (Case temps may be a little off as it's from the Kaze master pro fan controller) I have Un-installed EVERY driver for Motherboard, GPU & Soundcard and Re-installed twice. Windows is all up to date. To date i'v tried the following Running Memtest for 24 hrs straight, No errors Running Memtest on each individual RAM modules, No errors Reseated everything except the CPU Cleaned DIMM Sockets and Gold inputs Tested the Graphics cards 1 at a time Re-arranged all the SATA devices to run on Chipset controlled ports Re-installing all drivers OS: Win7 Professional 64bit Motherboard: ASRock X79 Extreme9 CPU: i7 3930k 3.2GHz GPU: Sapphire 7950 OC Edition V2 (2 card Crossfire) RAM: G.Skill Ripjaws Z F3-17000CL11Q-16GBZL 16GB (4x4GB) DDR3 Boot Drive: OCZ Agility 4 128GB Data Drive 1: Western Digital Black 2TB Data Drive 2: Western Digital Black 2TB Data Drive 3: Western Digital Green 3TB Power Supply: Corsair AX1200 Gold

  Read the article

• Are there any Microsoft Exchange Clients for iOS and Android that store their local data in an encrypted manner?

  - by Zac B

  I don't feel like this is a product recommendation question, more of a "does this tech even exist and is it feasible" question, but if I'm wrong, feel free to give this question the boot. Context: Our company has a bunch of traveling employees who access the company's Exchange server via thier iDevices or android phones, but because of the data protection laws in the state where our company is based (and the nature of the data our company works with), a recent security audit found that all mobile devices (laptops, phones, etc) operated by our company need to have all company correspondence and related data encrypted all the time. For laptops, that was easy: BitLocker or TrueCrypt, problem solved. For phones and tablets, however, I'm stumped. Sure, you can put lock screens/passwords on the phones, but the data is still accessible via external extraction, as law enforcement authorities already know. Question: Are there any clients for Microsoft Exchange that run on iOS or Android which store local data encrypted? The people using our mobile devices do a lot of their work while offline, so just giving them OWA access with SSL connection security isn't enough. Are there apps/technologies that present an additional login credential prompt to decrypt locally stored data in the app's storage area on the phone? My gut reaction when I started looking into this was "that doesn't sound like something Apple would allow into the App Store", but I've been wrong before...

  Read the article

• Completely automated DVD insert-rip-compress-eject workflow

  - by Kevin L.

  (Partially inspired by this question.) Background: I have a PC hidden away behind an HD LCD in custom-built entertainment center. The only visible part of the PC is an external DVD drive, mounted above the Wii. The PC happens to have Windows XP on it; Hackintoshing and Linux might be possible, but I've had issues with drivers for the sound card before. Let's just assume that OS X and Linux are a no-go unless they provide a truly awesome and simple solution for this particular problem. Goal: I would like to have a completely automated workflow for ripping DVDs. Something like this: Push the eject button on the DVD drive, insert the DVD. PC recognizes that this is a video DVD (as opposed to data). PC rips DVD to hard drive. PC finishes ripping, and ejects the DVD tray. PC compresses DVD image into some format that an Xbox 360 can read. PC copies finished compressed video file to a particular folder, so that it can be read into a WMP11 library and seamlessly played by the Xbox 360. PC cleans up all temporary files. Done. The impetus to have this be completely automated is that I’ll never need to switch the TV to the PC’s input and fiddle with the wireless keyboard. That’s just needless user intervention. The UI doesn’t have to be pretty. Nor do I care about speed. And I can probably bridge several of the gaps with some creative Perl use. But it seems likely that many (or all) of the parts should already exist. Any thoughts?

  Read the article

• Updating a staging server (from a CI server) in a Vagrant box with Chef

  - by Tomas Brambora

  I'm using Vagrant + Chef (chef_client provisioner) to create & provision a staging environment for my server. And I have a Jenkins job set up that is run every time I push to my 'develop' branch. In the Jenkins job, I would like to update & rebuild the source code of the server in the staging box and restart it. I have already written the cookbooks that install the dependencies, configure the db etc. But I'm not sure how to run only the update & rebuild & restart stuff from the cookbooks. I understand I could always tear down the whole box and rebuild it, but provisioning the box is a lengthy process so I would like to do that as little as possible. I split my server cookbook into 3 recipes: dependencies, db_setup and server. What I want to run in the my Jenkins job is the "server" recipe only. But I dont' understand how can I do that... If I specify the run_list on my Chef server, then I lose the ability to provision the whole box from scratch. Basically, I would like to be able to tell Vagrant from the command line what recipes Chef should run. Is that possible somehow? Cheers!

  Read the article

• How can a Linux Administrator improve their shell scripting and automation skills?

  - by ewwhite

  In my organization, I work with a group of NOC staff, budding junior engineers and a handful of senior engineers; all with a focus on Linux. One interesting step in the way the company grows talent is that there's a path from the NOC to the senior engineering ranks. Viewing the talent pool as a relative newcomer, I see that there's a split in the skill sets that tends to grow over time... There are engineers who know one or several particular technologies well and are constantly immersed... e.g. MySQL, firewalls, SAN storage, load balancers... There are others who are generalists and can navigate multiple technologies. All learn enough Linux (commands, processes) to do what they need and use on a daily basis. A differentiating factor between some of the staff is how well they embrace scripting, automation and configuration management methodologies. For instance, we have two engineers who do the bulk of Amazon AWS CloudFormation work, and another who handles most of the Puppet infrastructure. Perhaps a quarter of the engineers are adept at BASH shell scripting. Looking at this in the context of the incredibly high demand for DevOps skills in the job market, I'm curious how other organizations foster the development of these skills and grow their internal talent. Scripting doesn't seem like a particularly-teachable concept. How does a sysadmin improve their shell scripting? Is there still a place for engineers who do not/cannot keep up in the DevOps paradigm? Are we simply to assume that some people will be left behind as these technologies evolve? Is that okay?

  Read the article

• Logitech webcam device only recognised by one software, without drivers

  - by Ben Franchuk

  A couple weeks ago I purchased a Logitech webcam at a garage sale; It did not come with any driver DVDs or anything like that. I plugged it in, turned on my computer, and continued work as usual. I did not at the time (and still have not) gotten any drivers for the device. Recently, though, I started up an audio software named as Cubase, only to find that it was picking up audio reads off of... something. I checked my sound card, and everything else plugged into my computer, but couldn't find where in the world this audio was being picked up from. There were no microphones listed in the device managers, and no "unknown devices" or whatever. Everything seemed as it always was. Running out of ideas, i blew an air-horn directly into the general area of the webcam, located directly in front of me. Sure enough, the audio peaked, indicating that the microphone was definitely in the webcam and that Cubase was somehow picking up this audio, even without drivers. The software lists the device as a "Universal USB Microphone". Adobe Audition, Soundbooth, and other audio applications cannot find the device either. Why is it that this one software (Cubase) can use this device without a driver, while every other piece of software on the computer can't? Not even the operating system can recognize it. Windows 7 Professional x64 bit

  Read the article

• auth.log is empty (Ubuntu)

  - by Vinicius Pinto

  The /var/log/auth.log file in my Ubuntu 9.04 is empty. syslogd is running and /etc/syslog.conf content is as follows. Any help? Thanks. # /etc/syslog.conf Configuration file for syslogd. # # For more information see syslog.conf(5) # manpage. # # First some standard logfiles. Log by facility. # auth,authpriv.* /var/log/auth.log *.*;auth,authpriv.none -/var/log/syslog #cron.* /var/log/cron.log daemon.* -/var/log/daemon.log kern.* -/var/log/kern.log lpr.* -/var/log/lpr.log mail.* -/var/log/mail.log user.* -/var/log/user.log # # Logging for the mail system. Split it up so that # it is easy to write scripts to parse these files. # mail.info -/var/log/mail.info mail.warning -/var/log/mail.warn mail.err /var/log/mail.err # Logging for INN news system # news.crit /var/log/news/news.crit news.err /var/log/news/news.err news.notice -/var/log/news/news.notice # # Some `catch-all' logfiles. # *.=debug;\ auth,authpriv.none;\ news.none;mail.none -/var/log/debug *.=info;*.=notice;*.=warning;\ auth,authpriv.none;\ cron,daemon.none;\ mail,news.none -/var/log/messages # # Emergencies are sent to everybody logged in. # *.emerg * # # I like to have messages displayed on the console, but only on a virtual # console I usually leave idle. # #daemon,mail.*;\ # news.=crit;news.=err;news.=notice;\ # *.=debug;*.=info;\ # *.=notice;*.=warning /dev/tty8 # The named pipe /dev/xconsole is for the `xconsole' utility. To use it, # you must invoke `xconsole' with the `-file' option: # # $ xconsole -file /dev/xconsole [...] # # NOTE: adjust the list below, or you'll go crazy if you have a reasonably # busy site.. # daemon.*;mail.*;\ news.err;\ *.=debug;*.=info;\ *.=notice;*.=warning |/dev/xconsole

  Read the article

• NetApp FAS270 head doesn't see disks

  - by wfaulk

  I have an FAS270C. For months, I've been running it in a split-head manner (that is, with each head serving data totally independently, and without any clustering even being enabled) in order to facilitate moving some data around. I finally got everything situated, moved all the data to one of the heads, and was trying to get clustering set back up. Now when I try to install OnTap onto the "new" head, it cannot see any of the disks in the head shelf. (That is, the shelf into which the heads are inserted.) I've booted into maintenance mode, and it shows me that the 0b adapter, which should be the adapter that that shelf and its disks should be presented on, is in "OFFLINE (physical)" state. If I try to enable it with either "storage enable adapter 0b" or "fcadmin online 0b", it waits for about 30 seconds and then says: [fci.initialization.failed:error]: Initialization failed on Fibre Channel adapter 0b. [fci.adapter.online.failed:error]: Fibre Channel adapter 0b failed to come online. There is currently nothing attached to its external 0b port. I've tried it with and without an SFP plugged into it, and with and without its internal termination switch on. The currently active head can see those disks, and can see that two of them are assigned to the other head. Before I started reconfiguring, the "new" head could see disks on that shelf. They may even be the same disks that OnTap was installed on previously. Does anyone have any idea how to proceed?

  Read the article

• charging light on in laptop with battery removed.

  - by Jus12

  I hope this is the right place for this question. I have an LG R310 laptop. Recently the adapter connector started playing up, so I got a second hand replacement adapter of the same rating. The adapter was a cheap type (I know I made a mistake) and faulty.. it made a low buzzing sound when plugged in and not connected to the laptop. It didn't make the noise when connected to the laptop. Foolishly I used this adapter for several weeks. One day the adapter stopped working. The led didnt work and it was not charging. It had also drained the laptop's battery to 0%. I then got an original replacement adapter. Now I can use the laptop on power but the battery does not charge. The charging light does not come on. The interesting thing is that when I remove the battery the charging light comes on and stays on after I insert the battery back (the battery still does not charge). I need to know if the faulty adapter damaged the motherboard or if its just a problem with the battery. I have a multimeter and I prefer not to open the laptop. Thanks in advance.

  Read the article

• I can't download or stream for more then 3 sec, and then the conection activity just dies

  - by JMHein

  Just got a new internet connection installed at my sisters place, but it randomly just stops working. At first it was only affecting flash videos. they would randomly just stop buffering. I did a lot of research on this and found that there can be many things that cause this exact trouble. I then tried IE and some flash would stream fine, but still random deaths. So I told my brother in law to reset the router and modem and that fixed the problem for them but not my laptop. I then started trying to fix the flash problem only to fined that downloads of any kind were affected. Now it is so bad that 50% of page loads will never finish because the connection drops to 0% usage with in a split sec. I can't get flash reinstalled because the installer is trying to download but the download dies at 8% I tried up loading a large file by FTP to a web server with no troubles. Yet any activity on my end that takes longer then about 1 sec to finish, just never finishes I can watch the network log in the taskmanager and it spikes for ruffly one sec then drops back to zero and when I go back to the web page it says it is still loading and no matter how long I let it sit it never does any thing more till I reload then it will again create a very short spike of activity on the connection and then drop to zero. Also if I start a download and it does drop off I can restart the download where it left off and get up to 100Kb/s for around the same one sec then it drops to around 14Kb/s then zero a sec latter... I am running Win 7 home prem x64 with FF11 and IE8 I have simply tried every thing I can short of calling up the ISP which very likely will get me no where fast. any advice on what step to take to figure this out would be nice. I am not even sure it is not just an ISP problem. (at least I should be able to get flash reinstalled once I get back home)

  Read the article

• On a failing hard drive, I am able to view data but unable to copy it - why?

  - by Tom

  I have a 2.5" external hard drive that is failing. It's not making the expected 'clicking' noise that most hard drives and I am able to view the data, but I am unable to actually retrieve the data. I attempted to use SpinRite in order to access the data on the drive, but it didn't like the external drive. When I view the drive's property page, the drive shows that it's used space is at 100% and that it has 0 bytes available; however, the progress indicator under the drive icon in Windows Explorer shows that it's roughly 50% full (which is correct). When I attempt to run Windows' "Error Checking" tool and attempt to "scan for an attempt recovery of bad sectors," the tool begins to run then immediately closes with no error message. I am able to browse the contents of the drive using Windows Explorer. When I begin to try copying any given single file, the copy process begins, an indicator starts, and then the copy fails with no real error message. The Disk Management page in Computer Management under Control Panel also shows this drive has being 'Healthy.' I dropped the drive off at a data recovery store and they said that "The data seems to be intact, but an internal failure is preventing any information from being retrieved." They offered to provide me references to a data recovery specialist. I've also attempted to run CHKDSK on the drive (with and without arguments) but it returns the following error: The type of the filesystem is RAW. CHKDSK is not available for RAW drives. Before going the route of more expensive data recovery, I'm wondering if these symptoms sound familiar to anyone? Other questions... I'm willing to continue trying tools such as TestDisk and/or PhotoRec (as the majority of the data that I'd like to salvage are photos) but how long I should expect either tool to run given approximately 400GB of data? I'm also comfortable using Linux so I welcome any suggestions for utilities or tools and strategies with which you've had success.

  Read the article

• Cisco ASA: How to route PPPoE-assigned subnet?

  - by Martijn Heemels

  We've just received a fiber uplink, and I'm trying to configure our Cisco ASA 5505 to properly use it. The provider requires us to connect via PPPoE, and I managed to configure the ASA as a PPPoE client and establish a connection. The ASA is assigned an IP address by PPPoE, and I can ping out from the ASA to the internet, but I should have access to an entire /28 subnet. I can't figure out how to get that subnet configured on the ASA, so that I can route or NAT the available public addresses to various internal hosts. My assigned range is: 188.xx.xx.176/28 The address I get via PPPoE is 188.xx.xx.177/32, which according to our provider is our Default Gateway address. They claim the subnet is correctly routed to us on their side. How does the ASA know which range it is responsible for on the Fiber interface? How do I use the addresses from my range? To clarify my config; The ASA is currently configured to default-route to our ADSL uplink on port Ethernet0/0 (interface vlan2, nicknamed Outside). The fiber is connected to port Ethernet0/2 (interface vlan50, nicknamed Fiber) so I can configure and test it before making it the default route. Once I'm clear on how to set it all up, I'll fully replace the Outside interface with Fiber. My config (rather long): : Saved : ASA Version 8.3(2)4 ! hostname gw domain-name example.com enable password ****** encrypted passwd ****** encrypted names name 10.10.1.0 Inside-dhcp-network description Desktops and clients that receive their IP via DHCP name 10.10.0.208 svn.example.com description Subversion server name 10.10.0.205 marvin.example.com description LAMP development server name 10.10.0.206 dns.example.com description DNS, DHCP, NTP ! interface Vlan2 description Old ADSL WAN connection nameif outside security-level 0 ip address 192.168.1.2 255.255.255.252 ! interface Vlan10 description LAN vlan 10 Regular LAN traffic nameif inside security-level 100 ip address 10.10.0.254 255.255.0.0 ! interface Vlan11 description LAN vlan 11 Lab/test traffic nameif lab security-level 90 ip address 10.11.0.254 255.255.0.0 ! interface Vlan20 description LAN vlan 20 ISCSI traffic nameif iscsi security-level 100 ip address 10.20.0.254 255.255.0.0 ! interface Vlan30 description LAN vlan 30 DMZ traffic nameif dmz security-level 50 ip address 10.30.0.254 255.255.0.0 ! interface Vlan40 description LAN vlan 40 Guests access to the internet nameif guests security-level 50 ip address 10.40.0.254 255.255.0.0 ! interface Vlan50 description New WAN Corporate Internet over fiber nameif fiber security-level 0 pppoe client vpdn group KPN ip address pppoe ! interface Ethernet0/0 switchport access vlan 2 speed 100 duplex full ! interface Ethernet0/1 switchport trunk allowed vlan 10,11,30,40 switchport trunk native vlan 10 switchport mode trunk ! interface Ethernet0/2 switchport access vlan 50 speed 100 duplex full ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 switchport access vlan 20 ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! boot system disk0:/asa832-4-k8.bin ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server dns.example.com domain-name example.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-net subnet 10.10.0.0 255.255.0.0 object network svn.example.com host 10.10.0.208 object network marvin.example.com host 10.10.0.205 object network lab-net subnet 10.11.0.0 255.255.0.0 object network dmz-net subnet 10.30.0.0 255.255.0.0 object network guests-net subnet 10.40.0.0 255.255.0.0 object network dhcp-subnet subnet 10.10.1.0 255.255.255.0 description DHCP assigned addresses on Vlan 10 object network Inside-vpnpool description Pool of assignable addresses for VPN clients object network vpn-subnet subnet 10.10.3.0 255.255.255.0 description Address pool assignable to VPN clients object network dns.example.com host 10.10.0.206 description DNS, DHCP, NTP object-group service iscsi tcp description iscsi storage traffic port-object eq 3260 access-list outside_access_in remark Allow access from outside to HTTP on svn. access-list outside_access_in extended permit tcp any object svn.example.com eq www access-list Insiders!_splitTunnelAcl standard permit 10.10.0.0 255.255.0.0 access-list iscsi_access_in remark Prevent disruption of iscsi traffic from outside the iscsi vlan. access-list iscsi_access_in extended deny tcp any interface iscsi object-group iscsi log warnings ! snmp-map DenyV1 deny version 1 ! pager lines 24 logging enable logging timestamp logging asdm-buffer-size 512 logging monitor warnings logging buffered warnings logging history critical logging asdm errors logging flash-bufferwrap logging flash-minimum-free 4000 logging flash-maximum-allocation 2000 mtu outside 1500 mtu inside 1500 mtu lab 1500 mtu iscsi 9000 mtu dmz 1500 mtu guests 1500 mtu fiber 1492 ip local pool DHCP_VPN 10.10.3.1-10.10.3.20 mask 255.255.0.0 ip verify reverse-path interface outside no failover icmp unreachable rate-limit 10 burst-size 5 asdm image disk0:/asdm-635.bin asdm history enable arp timeout 14400 nat (inside,outside) source static any any destination static vpn-subnet vpn-subnet ! object network inside-net nat (inside,outside) dynamic interface object network svn.example.com nat (inside,outside) static interface service tcp www www object network lab-net nat (lab,outside) dynamic interface object network dmz-net nat (dmz,outside) dynamic interface object network guests-net nat (guests,outside) dynamic interface access-group outside_access_in in interface outside access-group iscsi_access_in in interface iscsi route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server SBS2003 protocol radius aaa-server SBS2003 (inside) host 10.10.0.204 timeout 5 key ***** aaa authentication enable console SBS2003 LOCAL aaa authentication ssh console SBS2003 LOCAL aaa authentication telnet console SBS2003 LOCAL http server enable http 10.10.0.0 255.255.0.0 inside snmp-server host inside 10.10.0.207 community ***** version 2c snmp-server location Server room snmp-server contact [email protected] snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart snmp-server enable traps syslog crypto ipsec transform-set TRANS_ESP_AES-256_SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set TRANS_ESP_AES-256_SHA mode transport crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group5 crypto dynamic-map outside_dyn_map 20 set transform-set TRANS_ESP_AES-256_SHA crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet 10.10.0.0 255.255.0.0 inside telnet timeout 5 ssh scopy enable ssh 10.10.0.0 255.255.0.0 inside ssh timeout 5 ssh version 2 console timeout 30 management-access inside vpdn group KPN request dialout pppoe vpdn group KPN localname INSIDERS vpdn group KPN ppp authentication pap vpdn username INSIDERS password ***** store-local dhcpd address 10.40.1.0-10.40.1.100 guests dhcpd dns 8.8.8.8 8.8.4.4 interface guests dhcpd update dns interface guests dhcpd enable guests ! threat-detection basic-threat threat-detection scanning-threat threat-detection statistics host number-of-rate 2 threat-detection statistics port number-of-rate 3 threat-detection statistics protocol number-of-rate 3 threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server dns.example.com source inside prefer webvpn group-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec group-policy Insiders! internal group-policy Insiders! attributes wins-server value 10.10.0.205 dns-server value 10.10.0.206 vpn-tunnel-protocol IPSec l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value Insiders!_splitTunnelAcl default-domain value example.com username martijn password ****** encrypted privilege 15 username marcel password ****** encrypted privilege 15 tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group Insiders! type remote-access tunnel-group Insiders! general-attributes address-pool DHCP_VPN authentication-server-group SBS2003 LOCAL default-group-policy Insiders! tunnel-group Insiders! ipsec-attributes pre-shared-key ***** ! class-map global-class match default-inspection-traffic class-map type inspect http match-all asdm_medium_security_methods match not request method head match not request method post match not request method get ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map type inspect http http_inspection_policy parameters protocol-violation action drop-connection policy-map global-policy class global-class inspect dns inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect icmp inspect icmp error inspect mgcp inspect netbios inspect pptp inspect rtsp inspect snmp DenyV1 ! service-policy global-policy global smtp-server 123.123.123.123 prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily hpm topN enable Cryptochecksum:a76bbcf8b19019771c6d3eeecb95c1ca : end asdm image disk0:/asdm-635.bin asdm location svn.example.com 255.255.255.255 inside asdm location marvin.example.com 255.255.255.255 inside asdm location dns.example.com 255.255.255.255 inside asdm history enable

  Read the article

• New keyboard for linux: Adesso Tru-Form or MS Natural Keyboard 4000?

  - by Andrea

  Hi folks! I'm going to buy a new ergonomic keyboard for my laptop. In the following, keep in mind I live in Italy. I considered the following models: Adesso PCK-308UB - Adesso Tru-Form™ Pro - Contoured Ergonomic Keyboard with TouchPad-PS2 Pro: has a built-in touchpad in the same position of my laptop somewhat cheaper than the alternative below Cons: the surface doesn't seem to be bowl-shaped. keys seem to lay on a straight slightly-inclined surface. It seems an idea used extensively in other ergonomic keyboards according to a few comments on the net, new Adesso keyboards seem to lack robustness, they're likely to loose small parts after a few weeks or months. Other users, instead, seem to never had any problem in years and swear by their quality and comfortability. Those who had problems, however, lamented a lack of responsiveness from the manufacturer. I'm not sure whether the keyboard, at least the standard keys, and the touchpad will both be recognized correctly under linux distros (I mostly use FC btw) last time I checked, Adesso didn't have local resellers in my country Microsoft Natural Ergonomic Keyboard Pro: recognized as one of the most comfortable keyboards reliable customer service operating in my country AFAIK there are several documented ways to get extra buttons work with linux Cons: it doesn't have a builtin touchpad and has a numeric keypad wasting space to reach mouse But there could be other keyboards I haven't considered yet, so here follows my ideal keyboard wishlist, ordered by priority linux compatible basic ergonomic design, which entails split tilted keyboard and pads advanced ergonomic design, like true-ergonomic's or kinesis , where special keys (like enter, caps-lock...) are placed symmetrically in the middle to be used by thumbs a builtin touchpad/trackball placed under the keyboard. I just love this on my notebook. I think it's pretty effective, since it allows my hand to rest naturally everytime I use it. Any opinion on this? high-quality switches, like cherry's (unsure about this one) additional programmable keys placed near usual ones, to simplify typing shortcuts TIA Andrea

  Read the article

• Linux: Managing users, groups and applications

  - by RN

  I am fairly new to linux admin so this may sound quite a noob question. I have a VPS account with a root access I need to install Tomcat, Java on it and later other open source applications as well. Installation for all of these is as simple as unzipping the .gz in a folder. My questions are A) Where should I keep all these programs? In Windows, I typically have a folder called programs under c:\ where I unzip all applications. I plan to have something similar here as well. Currently, I have all these under apps folder under/root- which I am guessing is a bad idea B) To what group should Tom belong to ? I would need a user - say Tom who can simply execute these programs. Do I need to create a new group? or just add Tom to some existing group ? C) Finally- Am I doing something really stupid by installing all these application by simply unzipping them? I mean an alternate way would be to use Yup or RPM or something like that to install these applications. Given my familiarity and (tight budget) that seems too much to me. I feel uncomfortable running commands which i don't understand too well

  Read the article

• 24TB RAID 6 configuration

  - by Phil

  I am in charge of a new website in a niche industry that stores lots of data (10+ TB per client, growing to 2 or 3 clients soon). We are considering ordering about $5000 worth of 3TB drives (10 in a RAID 6 configuration and 10 for backup), which will give us approximately 24 TB of production storage. The data will be written once and remain unmodified for the lifetime of the website, so we only need to do a backup one time. I understand basic RAID theory, however I am not experienced with it. My question is, does this sound like a good configuration? What potential problems could this setup cause? Also, what is the best way to do a one-time backup? Have two RAID 6 arrays, one for offsite backup and one for production? Or should I backup the RAID 6 production array to a JBOD? EDIT: The data server is running Windows 2008 Server x64. EDIT 2: To reduce rebuild time, what would you think about using two RAID 5's instead of one RAID 6?

  Read the article

• Laptop recommendation - Portable Gaming

  - by ivan

  So, I'm looking for a new laptop (http://superuser.com/questions/116869/toshiba-satellite-u500-totally-damaged-lcd). My requirements for a new Laptop are: -good keyboard(illuminated) and touchpad (multi-media keys included, should be better than toshiba u500) -good graphics card, with system rating of 6.3 and up for gaming graphics (my Toshiba U500 has 6.3). I used to run some heavy games on my Toshiba U500 with ATI Mobility Radeon 4570 with 512 mb VRAM but the framerates are not that nice on high settings. -Decent CPU but I think all new Core i3, i5, i7 can run most of recent resource intensive games (My Toshiba U500 has a Core 2 Duo T6500, 2.13 Ghz) I'm also looking for a long-term reliability, good sound quality, lots of fast RAM of-course(4GB DDR3 - 1066Mhz and up) and a clear looking LED screen with a decent resolution. (I can accomodate a laptop with screen size of 13-inch upto 15.6 inch, and I don't want it to be heavy because I might be taking it outdoors) I'm actually impressed when I saw HP Pavilion DV6t but the screen resolution seems to be a little too small for 15.6 inch. The Pavilion DV3 are also good but I want to know if there other options. Looking for some opinions.. Thanks. :D

  Read the article

• Are relative-path symlinks reliable on Rackspace Cloud Sites?

  - by Jakobud

  Rackspace's Cloud Sites have a lot of stupid limitations. For example, no SSH (in or out), no shell, no RSYNC, etc... (even through cron). Recently I learned that you can't reliably use symlinks in Cloud Sites. Apparently this is because the absolute path of your sites could change at any moment, since it's a shared host environment split up between many disks/servers. I guess different account's sites get moved from disk to disk whenever Rackspace decides to. Supposedly to increase efficiency across the board. So after talking with a Rackspace tech, he said they cannot guarantee that symlinks would always work. Obviously this is because if you have a symlink that use's an absolute path like this: //mnt/disk-34566/home/user34566/files/sites/www.mysite.com/mydir If you files go moved to a different disk (or whatever they do), then the absolute path would be different and the link would now be broken. That makes sense. So next, I asked the Rackspace tech if relative path symlinks were reliable. So if I have the following link: files/sites/www.mysite.com/mylink --> ../www.myothersite.com/anotherdir You can see that the symlink simply points to a nearby directory's sub-directory. He said they cannot guarantee that even those would always work either. Since it uses a relative path to another nearby directory I'm not sure how it could ever break from something Rackspace would do. Do relative symlinks somehow rely on absolute paths underneath? Or is Rackspace using some weird custom filesystem where they will break from absolute path changes? It seems like a relative-path symlink would be fine and would only break if the user did something to mess up the directories involved. But when the tech's say that they "don't officially support symlinks of any kind" that makes me hesitant to use them for large commercial websites in Cloud Sites. Can anyone with Rackspace experience give input on this topic?

  Read the article

• vagrant and puppet security for ssl certificates

  - by Sirex

  I'm pretty new to vagrant, would someone who knows more about it (and puppet) be able to explain how vagrant deals with the ssl certs needed when making vagrant testing machines that are processing the same node definition as the real production machines ? I run puppet in master / client mode, and I wish to spin up a vagrant version of my puppet production nodes, primarily to test new puppet code against. If my production machine is, say, sql.domain.com I spin up a vagrant machine of, say, sql.vagrant.domain.com. In the vagrant file I then use the puppet_server provisioner, and give a puppet.puppet_node entry of “sql.domain.com” to it gets the same puppet node definition. On the puppet server I use a regex of something like /*.sql.domain.com/ on that node entry so that both the vagrant machine and the real one get that node entry on the puppet server. Finally, I enable auto-signing for *.vagrant.domain.com in puppet's autosign.conf, so the vagrant machine gets signed. So far, so good... However: If one machine on my network gets rooted, say, unimportant.domain.com, what's to stop the attacker changing the hostname on that machine to sql.vagrant.domain.com, deleting the old puppet ssl cert off of it and then re-run puppet with a given node name of sql.domain.com ? The new ssl cert would be autosigned by puppet, match the node name regex, and then this hacked node would get all the juicy information intended for the sql machine ?! One solution I can think of is to avoid autosigning, and put the known puppet ssl cert for the real production machine into the vagrant shared directory, and then have a vagrant ssh job move it into place. The downside of this is I end up with all my ssl certs for each production machine sitting in one git repo (my vagrant repo) and thereby on each developer's machine – which may or may not be an issue, but it dosen't sound like the right way of doing this. tl;dr: How do other people deal with vagrant & puppet ssl certificates for development or testing clones of production machines ?

  Read the article

• Can't Get Mac Mini to turn on - no screen, no beep, only the fan, power light, and optical drive noi

  - by pibyers

  I have an Intel-based Mac mini mid-2007 (Model A1176). This is the computer my kids use so I don't use it regularly. The computer had been working fine until one day my kids told me that it no longer works. The computer will not boot up. When I turn it on the fan turns, the white power light in the front turns on, and there is a sound that appears to be from the optical drive (rather than hard drive). I don't get anything to the monitor, nor do I get any dings or other start up sounds from the computer. Here is what I've tried thus far to no avail: 1) Swapped out the monitors early on since I figured that was my weak link - no change 2) Reset the PMU - no change 3) Tried to boot up from the System Disk - The mini loaded the dvd into the drive, but nothing else (I can't eject the disk so I can put it back) 3) Start up the computer in target mode connected to another mac - I tried this too, but I never received a chime or the disk show up on the other mac. I'm about out of ideas apart from scraping the computer. Does anyone have any ideas that I can try? Again, nothing has been done to the computer in at least 6 months when I upgraded the RAM. I'm also still on Leopard. Thanks.

  Read the article

• PS/2 to USB adapter doesn't work with Model M keyboard

  - by mickburkejnr

  I bought a server about 3 months ago from a friend, and I have only had time to tinker with it in the last week. I noticed that this server doesn't have any PS/2 ports, which meant configuring it was near impossible. I don't have any USB keyboards in the house, I only have an IBM Model M keyboard (built 1994) and another IBM keyboard that was built circa 2001. Both of them have PS/2 connections. I bought an adapter off eBay, and when I used it with the Model M keyboard the three lights on the keyboard flashed for a split second, but then the keyboard is then unresponsive. I can bash away at the keys for ages and nothing will happen. The same applies to the later built IBM keyboard. What could I do to make the adapter work? I am getting the loan of a USB keyboard in two weeks time, but I'd like a more permanent solution without having to rely on getting the loan of a keyboard every time I have to perform maintenance on the server. And as I already have two keyboards which work fine and I like using, I don't really want to have to buy another keyboard just for use on the server.

  Read the article

• Outlook 2007 "Mark as Not Junk" Dialog Confusion

  - by David

  Outlook 2007's "Not Junk" button opens the "Mark as Not Junk" dialog. The dialog works correctly if I keep the "Always trust e-mail from <email address>" option checked. That is, the message is removed from the Junk folder and returns to the Inbox. However, if I uncheck the "Always trust" box, pressing OK dismisses the dialog, but nothing else happens. Why not? According to Outlook help, "When you mark a message as not junk, you are given the option of adding the sender or the mailing list name to your Safe Senders List or Safe Recipients List." That sure makes it sound like this is just an option, and not necessary for the core functionality of the action. I really don't want to trust a (possibly forged) From: address, but I do want my mail back in the Inbox. I could manually drag it, but I'm assuming that marking a message as not junk also trains some kind of bayesian filter. Am I mistaken? Thanks.

  Read the article

• How do I diagnose a bottleneck in an Intel Atom based Ubuntu server?

  - by Jon Cage

  I have a small media server at home which has software raid and a gigabit link to the rest of my network. For some reason though, I only get ~10MB/s transfers when copying to/from the server. I use software RAID5 (mdadm) over 4 1TB disks. On top of that I then use LVM to give me a huge pool of disk space which is then split up into multiple partitions which can be resized as and when they need it. I'm guessing this it most likely the cause, but I'd like to know for sure where the root cause is. So, how can I benchmark network throughput (Windows 7 desktop <- Ubuntu server) and hard disk performance to try and identify where my bottleneck might be? [Edit] If anyone's interested, the motherboard is an Intel Desktop Board D945GCLF2. So that's a 300 series Atom processor with the Intel® 945GC Express Chipset [Edit2] I feel like such a fool! I just checked my desktop and I had the slower of the two onboard NICs plugged in so the server is probably not at fault here. Transferring a copy of ubuntu off the server I get ~35-40MB/s according to Windows 7. I'll do those HD tests when I get a chance though (just for completeness).

  Read the article

< Previous Page | 232 233 234 235 236 237 238 239 240 241 242 243  | Next Page >