Search Results

Search found 8902 results on 357 pages for 'hardware virtualization'.

Page 237/357 | < Previous Page | 233 234 235 236 237 238 239 240 241 242 243 244  | Next Page >

• Cannot import video from a DV camcorder over FireWire

  - by qbeuek

  I have a JVC GR-D320 miniDV camcorder that has a FireWire interface. I recently upgraded to Windows 7 RTM (64 bit, fresh installation). When I connect my camcorder through FireWire, I can see it in Device Manager without any warnings or problems, but I cannot capture videos from my miniDV tapes. After connecting, AutoPlay displays "Import Video could not find a compatible digital video device. Verify that the digital video device is properly connected and turned on." When using Windows Live Photo Gallery after selecting the import option, my camera is not listed. The camera used to work perfectly on the same hardware before upgrading to Windows 7 RTM 64 bit (it used to work fine on Windows XP SP3 32 bit). Googleing revealed that people had the exact same problems in Vista, but no solution was provided. Any help?

  Read the article

• Windows 7 Activation with Bootcamp and VMWare

  - by Jason Hernandez

  I have windows 7(64) installation setup on a Boot Camp partition on my MacBook Pro 13". I also access this partition through VMware hosted by OS X (snow leopard). Every time I switch between VMware and Boot Camp windows says that it needs to be re-activated because of hardware or driver changes. I've tried wmware KB KB 1003426 to no avail. Edo Thanks, Jason Edit, I am using the most recent VMware and tools. I've tried "KB 1004917" as well. No Dice. I'm considering re-installing at this point.

  Read the article

• Windows XP loses drive letter for existing partition on disk

  - by Kev

  Hi, apologies if this has already been asked - I couldn't spot anything exactly the same. I'm looking for help on the fact that Windows XP has suddenly decided to stop assigning a drive letter to the second partition on my laptop's disk. I haven't added or changed hardware and I keep everything pretty clean in terms of software installed. I've partitioned the disk into a system partition on C: and a user partition on d: but lately, when booting or coming out of hibernation or sometime from stand-by, Windows will lose it's d: mapping. If I notice and remap it from MMC, everything will be perfectly happy and will keep going. Any help on this will be greatly appreciated. Cheers, Kev

  Read the article

• Disabling a touchpad in Windows

  - by Shamaoke

  I want to permanently disable a touchpad in Windows running on my laptop, since firstly, I use a mouse, and secondly, when I work, I often touch it accidentally what causes definite inconviniences. I tried the following approaches to disable it but with no result: Turned it off through BIOS — there's no such function there; Turned it off through the touchpad configuration utility — there's no such function there; Turned it off through the device manager — the disable button is inactive; Turned it off through a hotkey (Fn + F1 in my case) — the hotkey doesn't work; Uninstalled the proprietary driver — Windows automatically downloaded the standard driver; Uninstalled the standard driver and turned off the automatic driver download function (Win + R ? "systempropertiesadvanced" ? Hardware ? Device Installation Settings) — all the same, Windows downloaded and installed the driver. How can I disable a touchpad? Windows 7; the Alps touchpad.

  Read the article

• OS X Snow Leopard fails to boot after upgrade to 10.6.1

  - by pixeline

  I'm a fairly recent mac user. Been using windows for decades and happily switched. But i upgraded from 10.6 to 10.6.1 last night and the upgrade looks like it failed. I restarted the machine when it asked to then went to bed. In the morning the computer was still trying to shut itself off. So i forced the shutdown, restarted, but now i'm stuck with the loading spinner. What can i do? UPDATE: Verbose didn't show anything interesting. i also did the hardware test. Nothing comes up wrong. Disk utility did not find any error on the HD. But, it did show a fatal error when checking permissions.

  Read the article

• Apple shortcuts in Ubuntu

  - by rcourtna

  Hi, I switch between a Mac and Ubuntu often. On my Ubuntu box, I use an Apple Aluminum keyboard. I'm interested in Apple's "command" key: ? (I'm not concerned about the hardware control keys) cmd-T opens a browser tab cmd-C, cmd-V for copy/paste, especially in a terminal window control-c maintains the same meaning in terminal (abort) Just switching the control & command keys in Ubuntu would almost get me there, except for the special behaviour of the keys a terminal (Terminal is my most frequently used app). Has it been done? edit: using Gnome, not KDE

  Read the article

• High CPU usage on Linux machine

  - by user305210

  I have a piece of java code running on two different machines, but on one of the linux machines, the code uses alot of CPU (close to 100% cpu usage). On the other machine the same code uses less cpu (under 3 to 4%). The machine where cpu usage is high, is a more powerful machine, more CPU and and more memory. This has started happening recently and performance on the machine with high cpu usage has degraded significantly. I am wondering if anyone has any ideas why something like this could happen, possible causes behind this etc. any guesses? No recent changes in hardware were made, no recent code updates... Thank you.

  Read the article

• powertop keeps telling me to turn off the same thing, over and over

  - by Rory McCann

  I am running an ubuntu lucid laptop on battery. I want to make my power last as long as possible. Aswell as the normal things like turn down screen brightness, and turn off wifi, I'm using powertop. It will sometimes tell me things, e.g.: Suggestion: Enable USB autosuspend by pressing the U key OK, I press the U key to do that. However a few minutes later it will give me the same suggestion, it's as if it never enabled USB autosuspend the first time. It does this for other things aswell, not just USB autosuspend. e.g. it'll give me this message frequently: An audio device is active 100.0% of the time: hwC0D1 LSI ID 1040 Q - Quit R - Refresh A - Turn HD audio powersave on Is there anything I can do to make these choices 'stick'? Or do I have some unfortunatle hardware that won't obey linux? (If so, is there any way to confirm this?)

  Read the article

• Rate limiting an internet connection per user

  - by Alister

  I've got a friend who has a "rent-by-room" property and includes internet access as part of this. However some tenants are somewhat hogging the internet (i.e. constantly downloading). I was wondering if anyone knows of a fairly easy way of rate limiting each connection to make the system more equitable. A preferred solution would be a cheap piece of hardware or some sort of Linux "appliance". I would rather not have to get an iptables headache if this is avoidable.

  Read the article

• SQL 2008 Mirroring, how to failover from the mirror database?

  - by Luis

  I have configured a database mirroring setup in SQL 2008 using the High-safety, Synchronous mode, without automatic failover. I don't have a Witness instance. Regarding high availability, I understand Mirroring is a better strategy than Log Shipping (faster and smoother failover), and cheaper than Clustering (because of license and hardware costs). According to the MS docs, to do the failover you need to access to the Principal database and in the "Mirror" options click the "Failover" button. But I want to do this from the Mirror database, because what would be the benefit as all this setup is being done in case the Principal server knocks down? Evidently I am missing something. If Mirroring is not a solution for server downtime (as would be Clustering, if I understand correctly), then which practical (i.e. real world examples) cases would benefit from Mirroring for high-availability purposes? Thank you very much for your response! I really need some enlightment.

  Read the article

• Duplicate incoming TCP traffic on Debian Squeeze

  - by Erwan Queffélec

  I have to test a homebrew server that accepts a lot of incoming TCP traffic on a single port. The protocol is homebrew as well. For testing purposes, I'd like to send this traffic both : - to the production server (say, listening on port 12345) - to the test server (say, listening on port 23456) My clients apps are "dumb" : they never read data back, and the server never replies anyway, my server only accepts connections, and do statistical computations and store/forward/service both raw and computed data. Actually, client apps and hardware are so simple there is no way I can tell clients to send their stream on both servers... And using "fake" clients is not good enough. What could be the simplest solution ? I can of course write an intermediary app that just copy incoming data and send it back to the testing server, pretending to be the client. I have a single server running Squeeze and have total control over it. Thanks in advance for your replies.

  Read the article

• After low level formatting can microsoft track previously pirated windows installed on pc

  - by Neelabh

  I am getting call from Microsoft and they are forcing me to purchase so many licensed software but my budget is not that much.. So they are asking for On-Site Audit (SAM Review)... So I did low level formatting of my All PC's and Installed Ubuntu. So can they track I installed pirated windows xp earlier on these system or I need to change hardware.. After formatting on what parameter Microsoft Track earlier piracy: 1) By any Harddisk ID 2) By any Motherboard ID 3) By any IP Address Please help me otherwise I have to borrow so much money for licensing fee. Thanks in Advance..

  Read the article

• Use an unsigned driver in Windows 7 x64

  - by rjmunro

  I'm trying to use the RBC9 SpaceNavigator TEST x64 build drivers for my SpaceNavigator 3d joystick so that it can work as a normal joystick in games like Quake. Unfortunately, I get the error "This version of windows requires all drivers to have a valid digital signature" and in the "Device status" in device manager, I get "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)". Is there a way to work around this issue?

  Read the article

• Windows SBS 2011 DNS Role (service) failing & needing restarting

  - by HaydnWVN

  Have a Windows SBS 2011 with Exchange that is handling all DNS for the network. Since getting a 3rd party (Hardware & Support) to setup a recieving FTP service and restricting Exchanges memory useage for another 3rd party product (Stock software) the local network seems to periodically 'lose the internet connection'. Delving deeper I found that the DNS service is somehow failing/stopping without the actual service on the server reporting such (nothing in event logs). A simple restart of the 'DNS Role' on the server solves the problem. The manager onsite reports that he has to do this most days in the afternoon - yet not at the same time and other days it works fine without a restart being required. I'm unable (lacking sufficient SBS2011 knowledge) to diagnose this further, ideally I would like the DNS Role to report (and log) the failure, then automatically restart itself.

  Read the article

• Accessing guests on virtual network when connected to host via PPTP

  - by Viktor Elofsson

  I'm setting up a development machine which runs Ubuntu 12.04 and KVM for virtualization. I have a guest running Ubuntu 12.04 which can be accessed from the host via its IP address which is assigned by libvirt. The guest can also access the internet, no problem there. However, now I want to setup PPTP so I can connect to the host (from my workstation running Windows 7) and directly access guests without relying on SSH port forwarding. I can connect from my W7-machine to the host (PPTP), but I cannot access any virtual machines (which are accessable from the host directly). Relevant configuration files cat /etc/network/interfaces auto lo iface lo inet loopback # device: eth0 auto eth0 iface eth0 inet static address x.x.x.x broadcast x.x.x.x netmask x.x.x.x gateway x.x.x.x # default route to access subnet up route add -net x.x.x.x netmask x.x.x.x gw x.x.x.x eth0 virsh net-edit default <network> <name>default</name> <uuid>xxxxxxxx-72ce-3c20-af0f-d3a010f1bef0</uuid> <forward mode='nat'/> <bridge name='virbr0' stp='on' delay='0' /> <mac address='52:54:00:xx:xx:xx'/> <ip address='192.168.122.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.122.2' end='192.168.122.254' /> <host mac='52:54:00:yy:yy:yy' name='web1' ip='192.168.122.11' /> </dhcp> </ip> </network> cat /etc/pptpd.conf (commented lines removed) # TAG: option # Specifies the location of the PPP options file. # By default PPP looks in '/etc/ppp/options' # option /etc/ppp/pptpd-options # TAG: logwtmp # Use wtmp(5) to record client connections and disconnections. # logwtmp #(Recommended) localip 192.168.122.1 remoteip 192.168.122.234-238,192.168.122.245 cat /etc/ppp/chap-secrets* # Secrets for authentication using CHAP # client server secret IP addresses xxxxx * yyyyyyyyyy 192.168.122.100 I get the correct IP address when connecting my W7-machine, but when I try to ping the virtual machine at 192.168.122.11 I get Reply from 192.168.122.1: Destination port unreachable. It's probably something trivial I'm missing but I can't for the life of me figure out what it is. So I'm turning to you, serverfault.

  Read the article

• How much should I charge for setting up a client web server? [closed]

  - by Vincent

  I have quite the eccentric client who wants to move all his ecommerce websites (about 5-10, all PHP/MySQL) to his own web server that I'm supposed to build. He doesn't want to hear anything about VPS hosting and all the issues and expenses related to owning a server. My responsibility would be to buy all the hardware, install and configure software, etc. How much should I charge for this? I'm planning to start with two relatively moderate Dell PowerEdge C2100 servers, one for web (NGINX), one for db (MySQL).

  Read the article

• How to fully use the 4G in my Laptop under Ubuntu 9.10 - 32-bit

  - by jfmessier

  I have a Toshiba A100, which I upgraded to 4G of RAM. The hardware startup indeed shows 4G of RAM, and I recently installed Windows 7, just to see how it behaves on it. So far so good, it displays 4G of RAM. Not that I tried to use it all, but it displays it. Previously under XP, I also would see 4G of RAM. But under Ubuntu 9.10 (32 or 64 bits), it only displays 2.9 G of RAM. And my kernel is the "pae" compiled one, which is supposed to do the trick to work around the 32-bit CPU limitation. How can I get Ubuntu to fully use my 4G of RAM ?

  Read the article

• Probability of failure with larger number of network elements

  - by MikeKulls

  I'm having a discussion with a work colleague. I'm saying that a network with 100 elements will have pretty much 10 times as many failures as a network with 10 elements, ie a tech will need to replace faulty hardware 10 times more often. He suggests that the failure rate doesn't go up in a linear fashion and the failure rate will be significantly less than 10x, in fact only slightly more failures. This is not the probability of an outage etc, we are just talking in relation to the amount of parts that a tech would need to swap out in a given time frame.

  Read the article

• "broken" windows xp after disc replacement

  - by epeleg

  Windows xp pro OEM was installed on my machine, Disk was failing so I cloned it to a new disk (larger one). Now windows said that the hardware has changed significantly and I need to re-activate, and I would gladly do (got the product number on a sticker on the machine) - only that for running the activation process I need to be logged-in, but when I try to login it just automatically logs me out again :( I know my credentials are O.K. because I can connect to the machine remotely and also use sysinternals tools such as PsExec or PSList etc. on it from a remote machine by specifying user and pasword. Login via safemode does not work any differently then in normal mode... I tried to run rundll32.exe syssetup,SetupOobeBnk (as suggested in several places on the net) using PsExec but it did not seem to help... Is there any way out of this evil circle? [ can't log in because not activated - cant activate because not logged in ]

  Read the article

• Is there any way to play Netflix (stream) in Windows Media Player 11?

  - by Not So Sharp

  Googling for a solution yields a ridiculous page on eHow that instructs to insert a DVD from Netflix. But I am not interested in the DVD option. I am only interested in streaming and unfortunately none of my browsers (IE, FF, Chrome) uses the hardware acceleration built into my video card. The only way I can play non-choppy video on my PC is via Windows Media Player, but WMP doesn't list Netflix as one of the supported online stores for some reason. Any idea or trick how stream Netflix on WMP 11 instead of a browser?

  Read the article

• Get 5.1 surround sound from computer through a VCR config?

  - by Wedding Nails

  I'm posting to see if my idea of this setup is right and can be done. I currently have the following "equipment": a JVC VCR -quite old-, which has built in surround sound (aka it has several speaker outputs, which I believe is 5.1 and are connected to several speakers that are in every corner of the room), a computer with SPDIF optical output and a new flat screen TV (with built in HDMI). I want the computer to take advantage of the VCR's surround system (all the speakers in the room) in order to play mainly music and video always with all the speakers (5.1) and with the maximum sound quality. Currently, the computer plays sound only through the front speaker (I connect one output to the on board pc audio input) and the quality is really bad. As a side note, the computer video runs with S-video (old school), and the picture quality as you would imagine, is really bad with the new big LCD screen. My main goals are: to upgrade the picture with a new video card which would support HDMI (my tv has HDMI). to buy a SPDIF optical cable, connect one end to the VCR SPDIF input and the other end to the PC output This is theoretically what I've researched so far, and I came out with several questions: in this case, with the SPDIF cable connected, and all the configurations done in windows allowing the 5.1, will I get every content I play "converted" or played through all of my speakers? (I read this forum post). I already know that in order for this setup to play from all the speakers, the content/audio source has to be 5.1. but my question is, if there is a way to play from all of the speakers no matter what type of content I'm playing (that's why I said conversion there) I already know that HDMI cables carry digital sound. Is there a way I can only use said HDMI cord to the tv, and get sound through the VCR? (I'm not too sure about this, I would have to disable the TVs speakers and use the VCR surround as default, but I have no clue wether this can be done or not). Update: The ultimate question is, do I really have to rely on "sound virtualization" technology to get sound from all the speakers, no matter what content I play? (do I require a newer sound card, like a creative soundblaster with said technology?) Thanks!

  Read the article

• Intel Xeon vt-d query

  - by deploymonkey

  Does Xeon westmere ep (xeon 56xx series) have vt-d (=iommy / direct io) or does intel TXT (Intel® Trusted Execution Technology) include vt-d? I'm at a loss. I've been researching current processors for an important project for some time now. I need to know, if the xeon 5600s (Westmere EP) include vt-d (iommu/directed io/pci passing) because the system will run virtualized guests. This enables direct hardware access eg. pci passthrough, in xen for example. It seems that the 5600s TXT should incorporate vt-d and that xeon 5600s should include vt-d as they are ramped up 5500s, but there is no conclusive answer anywhere. Intel's processor comparison only states that 5500s have vt-d and no TXT and 5600s have no vt-d but TXT. I'd be really grateful if anybody could clear this up and possibly even provide a citation. Thanks a lot.

  Read the article

• Keep-Alive header not sent from Tomcat 5.5 http connector?

  - by Codek

  Hi, We're currently using a hardware load balancer, which then goes to Apache and that then goes to Tomcat 5.5 via the AJP connector. We've decided to dump apache for various reasons - In our current system it doesnt provide any advantage. However when I look at the headers sent when we do this, the "Keep-Alive: timeout=15 max=96" header doesnt get sent when you use the tomcat http connector Interestingly, i can find no documentiation on "keepalivetimeout" for tomcat5.5, but i can for tomcat6. But neither can i find evidence that tomcat5.5 doesnt support this setting. here's my connector: <Connector port="8090" maxHttpHeaderSize="8192" maxThreads="400" minSpareThreads="150" maxSpareThreads="300" enableLookups="false" connectionTimeout="2" maxKeepAliveRequests="400" disableUploadTimeout="true" /> So; Is there any way I can specify the keepalive timeout if we use the http connector with tomcat 5.5, and force this header entry to be sent? Thanks, Dan

  Read the article

• unable to install new versions of linux on my PC

  - by iamrohitbanga

  I have an MSI-RC410 motherboard with onboard ATI Radeon XPress 200 series Graphics card. I have used OpenSuse-11.0 on my PC for over an year. but when I tried to upgrade to OpenSuse-11.1, I managed to install it only to find that several features were missing. for example /dev/cdrom was missing. Also install DVD of Fedora 11 did not work. I have also tried Ubuntu-9.10 live cd. When I boot from the CD i get the initramfs command prompt. Still able to install old versions of these OSs. What is the reason for this behavior? Does it have to do anything with the new version of the linux kernel not being compatible with my hardware? What should i do to install new versions of Linux?

  Read the article

• Why can't I play YouTube clips properly anymore?

  - by NoCanDo

  I haven't got the faintest idea what happened, but since about 3-4 days now I can't play any clips on YouTube properly at all. Proper as in continuously without loading, pause, playback, pause, loading, playback, pause, loading, playback, etc. I haven't changed anything hardware nor software-wise. On the other hand I can play Break.com, Viddler, Liveleak, Metacafe without any trouble. I tried my own tips, but that hasn't helped me at all. What on earth happend? Is it me, or is it YouTube? I'm using Firefox 3.6 Beta 5. But the issue is the same on Chrome as well as on Internet Explorer.

  Read the article

< Previous Page | 233 234 235 236 237 238 239 240 241 242 243 244  | Next Page >