Search Results

Search found 10215 results on 409 pages for 'ram usage'.

Page 237/409 | < Previous Page | 233 234 235 236 237 238 239 240 241 242 243 244  | Next Page >

• Minimum Requirements for (open) Solaris?

  - by Electrons_Ahoy

  I'm thinking about knocking together a Solaris box at home to act as a combination server and learning exercise. What are the minimum hardware specs I can throw at it such that it'll be actually usable? I'd be cobbling the machine together from a stack of various x86 PC spares/leftovers. Does anyone have experience with Solaris at the lower end of the spectrum? The Sun site, for example, claims it'll run with as little as 255 megs of ram, but is it worth the exercise with less than a gig? Will my old Pentium II 450 cut the mustard? (I'm willing to throw a couple of bucks at pricewatch/mwave/newegg on this, but if I need to build a better rig than my main PC, I may not bother.)

  Read the article

• Bios wont post unless I restart power supply.

  - by remy

  I have an annoying problem with a computer. The BIOS wont post after it has been turned off and started again unless I turn the switch off/on on the power supply. The fans, cdrom hdd and everything starts running but the bios never beeps and the monitor stays black. I HAVE TRIED: reinstalling windows xp, flashed bios to latest, cmos clear, new power supply, other hdd, new memory sticks, graphics card. I also removed the motherboard from the computer case and laid it on a cardboard box and only connected the PSU, RAM and CPU. Other than this the computer works great but its annoying having to off/on the power supply switch before turning it on after its been off. My guess is that the motherboard is faulty but I would just like to hear what you guys think. Sorry for my english / Remy

  Read the article

• Is there a free tool/package that can monitor web traffic and display URLS accessed? [closed]

  - by Anthony

  I couldn't find a similar question but then maybe I am searching for the wrong terms. A few years ago I used a router like device, I'm pretty sure it was a SonicWall, that did this on a clients site. Basically all traffic would be routed through this device and it allowed the manager/administrator to inspect web usage of the workers, determine how often certain resources were accessed and block them if necessary (much like content filter). It showed reports based on domain name reached etc. Facebbok.com, Bebo.com and so on. It also displayed the usual IP traffic information etc. it was a UTM also. I have tried Endian firewall, with it's NTOP install, but I don't think that will show URLs browsed. Maybe I just haven't found it in NTOP yet? I need this to troubleshoot connection and traffic issue at my home, with about twenty devices/users so didn't want to buy a dedicated solution and have spare hardware to use a community product.

  Read the article

• How do I associate server traffic to a domain hosted on that server?

  - by morley

  I have three or four Linux servers, each of which hosts anywhere from 5 to 50 domains. Each domain has its own folder: /www/projectname/web/ Logs go in: /www/projectname/log However, if there's a traffic spike (or, as I see it on my end, a memory usage spike), I'm not sure how to figure out which domain is responsible for the traffic without running tail -f on each of the projects and making an educated guess based on how fast things scroll. There's got to be a better way! There probably is, but I haven't seen it. And the last time I checked, bandwidth monitors only report system-wide load. So if anyone knows how to do this the right way, please let me know. Thanks!

  Read the article

• md5sum of large files gives different results sometimes

  - by Emanuele

  I have an AMD quad core, 8 gb RAM, 1 SSD EXT2 (2 months old), 2 HDD EXT4, approximately 1 year old. I'm using Ubuntu 10.04 x86-64 and when I compute the md5sum of large files (9 GB) sometimes I get different values than the one stored on a reference file. Upon restarting and switching off the PC then I get the expected results no matter how many times I repeat it. But this is random. I've turn on ECC (the fastest possible settings) and the issue seems to be rarer, but I've run memtest86+ for 6+ hours without a glitch (and with ECC off!). Any idea? Should I update the BIOS of my motherboard (Asus EVO-something...don't remember it now)? I've tried all the rest apart this, but genuinely don't know what to do anymore... Any suggestion is appreciated!

  Read the article

• RAID 1 not performing as expected

  - by Faken

  I recently bought a new 320Gb hard drive for my computer to set up RAID 1 on it for some added security. Installation went as smooth as could possibly be (plug in power, plug in data cable, start up computer, Intel software recognized new drive, right click create RAID 1, done!). However, for some inexplicable reason, I seem to have strange test results when using BENCH32. On my old configuration, a single 7200 rpm drive, I achieved about 60 MB/s write and 70 MB/s read. With a new RAID 1 configuration, I would expect the write to be slightly diminished but read to be significantly improved (though not exactly double speed). However, with the new configuration, I am getting 90 MB/s write and only about 80 MB/s read. I should NOT be getting improved write performance, especially NOT better than read! What's going on? My system setup is: q6600 2.4ghz CPU 4Gb DDR2 667mhz RAM on board Intel ICH9R "RAID chip" 2x Seagate 7200 RPM 320GB drives in RAID 1 Widows 7 home premium 64-bit

  Read the article

• Linux Software Raid runs checkarray on the First Sunday of the Month? Why?

  - by mgjk

  It looks like Debian has a default to run checkarray on the first Sunday of the month. This causes massive performance problems and heavy disk usage for 12 hours on my 2TB mirror. Doing this "just in case" is bizzare to me. Discovering data out of sync between the two disks without quorum would be a failure anyway. This massive checking could only tell me that I have an unrecoverable drive failure and corrupt data. Which is nice, but not all that helpful. Is it necessary? Given I have no disk errors and no reason to believe my disks have failed, why is this check necessary? Should I take it out of my cron? /etc/cron.d# tail -1 /etc/cron.d/mdadm 57 0 * * 0 root [ -x /usr/share/mdadm/checkarray ] && [ $(date +\%d) -le 7 ] && /usr/share/mdadm/checkarray --cron --all --quiet Thanks for any insight,

  Read the article

• How to select the account on the login screen of Windows7 by start typing the name?

  - by akira

  When MacOS boots up and the users is prompted to select the account (s)he wants to login into, the users can either click the name / icon of the account with the mouse or just type in the name of the account. I want to do the same at the login screen of Windows7: Login screen pops up, I start to type my account name, I select the account with enter and then I type the password and enter again. No usage of the mouse involved. (I am aware of tab-cycling and hard-to-follow-the-almost-invisible-marker-of-where-the-focus-is-right-now)

  Read the article

• Force Firefox 14 to free memory when opening/closing lots of popups

  - by aknghiem

  I'm currently trying to run some tests on a web application using Selenium IDE with Firefox 14. The tests mainly consist in loading a page containing thousands of links and clicking on every of those links. Of course, each time a popup shows, I tell Selenium to close it and proceed with the remaining links. However, it seems that even if I close the popups, Firefox is not freeing memory. Usually, I end up with Firefox crashing after opening 1500 popups (around 2.5Gb of memory usage). Is there any way to force the browser to free memory? Maybe something I should set in about:config? Or is there a flaw with Selenium? Thanks.

  Read the article

• Commit charge peak higher than system limit

  - by Grubsnik

  We are seeing some very strange behaviour on our servers and google didn't turn up anything usefull, so I'm tossing it out here. A standard server is configured with 4GB Ram, 2 4GB pagefiles and running windows server 2003. The servers are running 50-120 vb6/.net applications which normally consume no more than 100mb of memory, but will occasionally run up to 300 mb. The issue with a single process spending way too much memory is being traced down somewhere else, but the thing that is baffling us is that the reported peak charge is vastly higher than what we have available. As the image above shows, we are getting reported peaks that are way higher than what the system is actually capable of delivering. This number has been seen as high as 29GB, which makes no sense at all for a system with a limit of 12GB. Does anyone have an idea what is going on?

  Read the article

• Ultra-lightweight web browser?

  - by zildjohn01

  Are there any good super-lightweight graphical web browsers out there? I'd like to be able to browse the web on an old PC, but the mainstream crop of browsers is just too heavy, and I don't want to resort to something like Lynx. There must be something decent out there that'll fit in 16 or 32MB of RAM comfortably. 100% standards compliance isn't necessary, but I'd like something that supports the most widely used parts of CSS and JavaScript. The goal is to get 98% of sites usable in a nice, graphical format.

  Read the article

• what can I do with an old but working PC [closed]

  - by fskreuz

  I have an old Dell optiplex GX240 on Pentium 4 1.8Ghz and 256MB Ram (or was it 512MB). It's still in working condition but it's getting slow for me and i wanted to optimize it. I just want that old box to be usable even for simple desktop use (email, surfing, chat). I also have to note that my parents prefer use it over a laptop for some reason. Treat it as a "box-type netbook". unlike the other threads that they all prefer sending away or use as file server, firewall and that, i am looking for suggestions on how to keep it usable as the main PC. any suggestions? OS perhaps?

  Read the article

• Using VLC to Unicast High Definition Webcam over local gigabit LAN with low/zero delay

  - by Robin Day

  We're setting up a webcam "window" between two offices in the same buildilng. The two PC's are connected to the same gigabit switch. We're using VLC to stream the webcam over HTTP using the following commands. vlc dshow:// :dshow-caching="0" :dshow-size="640x480" :sout=#transcode{vcodec=h264,vb=0,scale=0}:http{mux=ffmpeg{mux=flv},dst=:8080/} :no-sout-rtp-sap :no-sout-standard-sap :ttl=1 :sout-keep vlc http://192.168.0.1:8080 :http-caching="0" Even with the caching set to zero, the delay in the image is a good 2-3 seconds. The CPU usage of each pc is also maxed. I'm guessing it's the transcoding that's causing much of the delay. Can anyone give me some changes to these command lines that will reduce the transcoding power, or send the webcam over a different protocol, or anything that will reduce the delay of the cameras? Bandwidth is not an issue at all as the pc's can be connected to a dedicated switch/vlan if required.

  Read the article

• Local dedicated hosting space (own hardware)

  - by Scott

  Where can I find local dedicated hosting space for my own hardware? I know I can rent dedicated hosting from various companies online, but usually I think that means I'm renting their hardware too. I just need a space with a network connection and a power outlet. That's it. How much would this cost? What would I search for? Is it available easily? Or would it only be the sort of thing huge companies would do? I'm in the greater NYC area. It's for a project I'm working on, but the thing's loud and annoying. I'd be willing to pay a little to get it out of sight and out of mind. I don't even care too much about the quality of the network connection. I'd rather not rent other people's hardware cause it probably would cost a fortune to rent a machine like this (tons of ram).

  Read the article

• Can I optimize this mod_wsgi / apache file better?

  - by tomwolber

  I am new to Django/Python/ mod_wsgi, and I was wondering if I could optimize this file to reduce memory usage: ServerRoot "/home/<foo>/webapps/django_wsgi/apache2" LoadModule dir_module modules/mod_dir.so LoadModule env_module modules/mod_env.so LoadModule log_config_module modules/mod_log_config.so LoadModule mime_module modules/mod_mime.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule wsgi_module modules/mod_wsgi.so LogFormat "%{X-Forwarded-For}i %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined CustomLog /home/<foo>/logs/user/access_django_wsgi.log combined ErrorLog /home/<foo>/logs/user/error_django_wsgi.log KeepAlive Off Listen 12345 MaxSpareThreads 3 MinSpareThreads 1 MaxClients 5 MaxRequestsPerChild 300 ServerLimit 4 HostnameLookups Off SetEnvIf X-Forwarded-SSL on HTTPS=1 ThreadsPerChild 5 WSGIDaemonProcess django_wsgi processes=5 python-path=/home/<foo>/webapps/django_wsgi:/home/<foo>/webapps/django_wsgi/lib/python2.6 threads=1 WSGIPythonPath /home/<foo>/webapps/django_wsgi:/home/<foo>/webapps/django_wsgi/lib/python2.6 WSGIScriptAlias /auctions /home/<foo>/webapps/django_wsgi/auctions.wsgi WSGIScriptAlias /achievers /home/<foo>/webapps/django_wsgi/achievers.wsgi

  Read the article

• Firefox (on windows) constantly consuming 10% CPU - is there an add-in to find the rogue tab?

  - by tbone

  I often have many Firefox windows open, each with many tabs. Now and then one of the tabs will be running a web page that for some reason consumes lots of resources. Right now, I have a tab somewhere that is constantly consuming 10% of the CPU...which would be fine as my computer can easily handle that (see specs below...all other apps are responsive), but it seems to slow Firefox down....everything, everywhere is extremely laggy in Firefox, I can see pauses while I type this. Is there: - a way I can isolate separate instances (or even tabs) in FF into a separate process, so one rogue tab doesn't bog down FF across the entire system? - maybe an add-in that can either identify tabs consuming lots of CPU, or maybe a way to "shut down" activity on tabs you haven't used in a while? Firefox 3.6.10 Windows 7 Ultimate 64 i7 920 @ 3.6 GHz 12 GB Ram

  Read the article

• Bigger ProjectServer farm is performing worse

  - by MSPS DBA

  I am using Project Server 2007 sp3 with SharePoint 2007 sp3 and SQL Server 2008 r2. I have recently moved my farm from 2 servers (1 DB and 1 App/Web) to a very big farm having Many Servers, Clustered Database, Load Balancer, Powerful processors and Large RAM. This Farm has more than one Web Servers, Project App Servers, SharePoint App Servers and a separate Index Server. But the performance of Project Server in the new Farm has been downgraded. Views are taking even more time to load data and Project publishing time has also been increased. I am also facing deadlock problems which are causing the project server queue jobs to fail. Could anyone inform me that what would be the reason of this problem and what should be the starting point to look into the issue? Is it mainly because now the application server needs to communicate with other application servers which were not needed in the previous farm? Thanks!

  Read the article

• Is a PCIE X1 card for USB 3.0 worth it?

  - by lelouch

  I have a portable HDD on USB 3.0, and soon I'll have a 32gb flash drive on USB 3.0 as well. My motherboard is pretty old - and the next time I'll upgrade it is when I get a new CPU/mobo/ram. Slots on my mobo: PCIE X16 - For my GTX 260 2xPCI PCIE X1 I'm considering purchasing a PCI express X1 card like this - http://www.ebay.com.au/itm/PC-Laptop-2-USB3-0-Ports-PCI-E-PCI-Express-X1-Card-New-/280772000446?pt=AU_Networking&hash=item415f50babe Now the question: What are realistic (read/write) speeds I'll get in this setup, assuming I have 1 USB 3 device connected at a time, and the bottleneck is the PCIE?

  Read the article

• Minimalistic flatfile-based "wall" PHP app with authentication and RSS?

  - by Nicolas Raoul

  I am looking for an open-source minimalistic "message board" PHP software. Not a forum, more something like one simple facebook wall. The only thing a user can do is post a new message. With RSS, and able to run on flat files (no database) with Apache+PHP Authentication based on a configuration file, no management UI needed. For now I use this software, but it lacks RSS: http://nrw.free.fr/data/projects/pano/demo/index.php?pano=ifc Anyone knows a software that matches my description? Thanks! Usage: communication between my family's 5 members living on different continents.

  Read the article

• Suspected power supply issue? PC repeatedly whirs for some seconds and then dies.

  - by benwebdev

  I've come home today and switched on the PC I've built a few months ago only for the machine to whir for a few short seconds and then die. It repeats this until I disconnect the power lead. Nothing is output to the screen and this cut out happens very quickly after switching it on. What could this be and how could it be fixed? Is it the power supply? I'm in despair :-( My spec is below, everything is new and was bought and assembled within the last 6months, system has been fantastic until now. Power Supply: 620W CoolerMaster Real Power M620 Motherboard: Gigabyte GA-X58A-UD3R Intel X58 (Socket 1366) DDR3 Processor: Intel Core i7 930 2.80GHz @ 4.00GHz RAM: 6GB DDR3 OS Windows 7 64bit Sapphire HD 5770 Vapor-X 1GB Graphics card 1TB Hitachi HDD 720GB Seagate Barracuda HDD 350GB Seagate Barracuda HDD EMu 0404 PCI Soundcard D-Link PCI-E wireless card Samsung DVD RW drive

  Read the article

• Web Farm Application deployment best practices

  - by rauts

  Hi All, We are having a web farm which hosts multiple ASP.Net applications. We typically have 4 servers on the farm. The dilemma which i am having is in terms of capacity issue of the farm. Lets say i have currently got 200 apps in total. Should I deploy all 200 apps on all 4 servers (i.e. all the servers in the farm are identical) or should i split the applications between 2 sets of server and create 2 smaller farms so that i can then manage the application based on its criticality and usage etc. Any best practices in this area would be highly appreciated. Thanks Rauts

  Read the article

• Home movie video browser

  - by Jim Hunziker

  I have a bunch of home movies that don't have useful filenames because they came straight off the camera. (I'm using Vista 64, by the way.) Picasa is pretty good for browsing through them and watching them, but it doesn't use my video card for rendering the videos. My CPU gets pegged at max usage, and full screen barely works. Windows Media Player or Quicktime works fine. Is there another application (like Picasa) that can be used for browsing through movies that both uses my video card and shows thumbnails of all the movies in my collection? I'd rather have something nicer than Windows Explorer. (The movies are h.264 AAC 1280x720.)

  Read the article

• SBS2011 Detailed Network Report

  - by HaydnWVN

  I have configured an SBS2011 Server to e-mail me a weekly 'Detailed Network Report' (saw it while configuring a daily e-mailed Back Up report). Within the Report there is lots of info regarding all the Roles on the server (Security, Updates, Back Up etc). Under E-Mail Usage and Mailbox Sizes the following is shown: Now I know these users are sending much more than 1 e-mail a week! So what exactly is this report showing? E-mails within the last 24 hours? How do I go about configuring the Report to show me e-mail statistics for the last week/day/whatever?

  Read the article

• Why does Windows 7 x64 work faster than an x86 edition on my PC?

  - by Jasper

  Why does Windows 7 x64 work faster than an x86 edition on my PC even though I mostly use x86 things in it? What's wrong with me, and what am I missing? Majority of the things I use is x86 (e.g. DAWs, games, media players). A considerable amount of them, however, are x64 (although their x86 counterparts work just fine). I've tried using the same things on the same system but always ended up finding Windows 7 x64 working slightly faster than x86. I'm very observant. I even notice the tiniest window animations. System: Windows 7 Ultimate x64 CPU: Intel Core 2 Duo E7500 @ 2.93 GHz RAM: 2 GB x 2 = 4 GB DDR2 @ 332 MHz Motherboard: Intel D945GCNL Graphics: ATI Radeon HD 4350 @ 1 GB Dedicated Audio: M-Audio FastTrack Pro HDD: Samsung HD753LJ 733 GB & Samsung HD160JJ 156 GB As you can see, my system is old.

  Read the article

• Setting up Ubuntu Server for hosting Java web applications

  - by Denis Hoss

  I'm trying to set up an Web Server running Ubuntu server to host some Java web applications, with MySQL running on it, an so on .. here is the tutorial I follow: perfect server ubuntu 11.10 The server configuration is: CPU S1155 INTEL Pentium G850 2.9GHz VGA 5GTs 3MB 65W MB Gigabyte GA-H77-D3H Ram 4x4Gb HDD 5x1TB Seagate (4 in RAID5 and 1 for Backup) The problem is that when I am trying to install the Server version of Ubuntu, when the installer asks me whether to activate ATA RAID Devices, and I click yes, he sees only that one, if I click no, he sees all 5 HDD's separate without any RAID, is this normal? I also tried to install the Desktop version on RAID5, but after restart, Ubuntu does't want to boot up, an underscore stands on the top of the screen. I am a newbie in servers and their configuration, in fact I am developer. I need a help from you guys.

  Read the article

< Previous Page | 233 234 235 236 237 238 239 240 241 242 243 244  | Next Page >