model attribute - Page 238

Cheap ways to do scaling ops in shader?

- by Nick Wiggill

I've got an extensive world terrain that uses vec3 for the vertex position attribute. That's good, because the terrain has endless gradations due to the use of floating point. But I'm thinking about how to reduce the amount of data uploaded to the GPU. For my terrain, which uses discrete / grid-based vertex positions in x and z, it's pretty clear that I can replace my vec3s (floats, really) with shorts, halving the per-vertex position attribute cost from 12 bytes each to 6 bytes. Considering I've got little enough other vertex data, and an enormous amount of terrain data to push into the world, it's a major gain. Currently in my code, one unit in GLSL shaders is equal to 1m in the world. I like that scale. If I move over to using shorts, though, I won't be able to use the same scale, as I would then have a very blocky world where every step in height is an entire metre. So I see these potential solutions to scale the positional data correctly once it arrives at the vertex shader stage: Use 10:1 scaling, i.e. 1 short unit = 1 decimetre in CPU-side code. Do a division by 10 in the vertex shader to scale incoming decimetre values back to metres. Arbirary (non-PoT) divisions tend to be slow, however. Use (some-power-of-two):1 scaling (eg. 8:1), which enables the use of a bitshift (eg. val >> 3) to do the division... not sure how performant this is in shaders, though. Not as intuitive to read values, but possibly quite a bit faster than div by a non-PoT value. Use a texture as lookup table. I've heard that this is really fast. Or whatever solutions others can offer to achieve the same results -- minimal vertex data with sensible scaling.

Read the article

What is the best way to store a table in C++

- by Topo

I'm programming a decision tree in C++ using a slightly modified version of the C4.5 algorithm. Each node represents an attribute or a column of your data set and it has a children per possible value of the attribute. My problem is how to store the training data set having in mind that I have to use a subset for each node so I need a quick way to only select a subset of rows and columns. The main goal is to do it in the most memory and time efficient possible (in that order of priority). The best way I have thought of is to have an array of arrays (or std::vector), or something like that, and for each node have a list (array, vector, etc) or something with the column,line(probably a tuple) pairs that are valid for that node. I now there should be a better way to do this, any suggestions? UPDATE: What I need is something like this: In the beginning I have this data: Paris 4 5.0 True New York 7 1.3 True Tokio 2 9.1 False Paris 9 6.8 True Tokio 0 8.4 False But for the second node I just need this data: Paris 4 5.0 New York 7 1.3 Paris 9 6.8 And for the third node: Tokio 2 9.1 Tokio 0 8.4 But with a table of millions of records with up to hundreds of columns. What I have in mind is keep all the data in a matrix, and then for each node keep the info of the current columns and rows. Something like this: Paris 4 5.0 True New York 7 1.3 True Tokio 2 9.1 False Paris 9 6.8 True Tokio 0 8.4 False Node 2: columns = [0,1,2] rows = [0,1,3] Node 3: columns = [0,1,2] rows = [2,4] This way on the worst case scenario I just have to waste size_of(int) * (number_of_columns + number_of_rows) * node That is a lot less than having an independent data matrix for each node.

Read the article

What's wrong with this Open GL ES 2.0. Shader?

- by Project Dumbo Dev

I just can't understand this. The code works perfectly on the emulator(Which is supposed to give more problems than phones…), but when I try it on a LG-E610 it doesn't compile the vertex shader. This is my log error(Which contains the shader code as well): EDITED Shader: uniform mat4 u_Matrix; uniform int u_XSpritePos; uniform int u_YSpritePos; uniform float u_XDisplacement; uniform float u_YDisplacement; attribute vec4 a_Position; attribute vec2 a_TextureCoordinates; varying vec2 v_TextureCoordinates; void main(){ v_TextureCoordinates.x= (a_TextureCoordinates.x + u_XSpritePos) * u_XDisplacement; v_TextureCoordinates.y= (a_TextureCoordinates.y + u_YSpritePos) * u_YDisplacement; gl_Position = u_Matrix * a_Position; } Log reports this before loading/compiling shader: 11-05 18:46:25.579: D/memalloc(1649): /dev/pmem: Mapped buffer base:0x51984000 size:5570560 offset:4956160 fd:46 11-05 18:46:25.629: D/memalloc(1649): /dev/pmem: Mapped buffer base:0x5218d000 size:5836800 offset:5570560 fd:49 Maybe it has something to do with that men alloc? The phone is also giving a constant error while plugged: ERROR FBIOGET_ESDCHECKLOOP fail, from msm7627a.gralloc Edited: "InfoLog:" refers to glGetShaderInfoLog, and it's returning nothing. Since I removed the log in a previous edit I will just say i'm looking for feedback on compiling shaders. Solution + More questions: Ok, the problem seems to be that either ints are not working(generally speaking) or that you can't mix floats with ints. That brings to me the question, why on earth glGetShaderInfoLog is returning nothing? Shouldn't it tell me something is wrong on those lines? It surely does when I misspell something. I solved by turning everything into floats, but If someone can add some light into this, It would be appreciated. Thanks.

Read the article

Weblogic 10.0: SAMLSignedObject.verify() failed to validate signature value

- by joshea

I've been having this problem for a while and it's driving me nuts. I'm trying to create a client (in C# .NET 2.0) that will use SAML 1.1 to sign on to a WebLogic 10.0 server (i.e., a Single Sign-On scenario, using browser/post profile). The client is on a WinXP machine and the WebLogic server is on a RHEL 5 box. I based my client largely on code in the example here: http://www.codeproject.com/KB/aspnet/DotNetSamlPost.aspx (the source has a section for SAML 1.1). I set up WebLogic based on instructions for SAML Destination Site from here:http://www.oracle.com/technology/pub/articles/dev2arch/2006/12/sso-with-saml4.html I created a certificate using makecert that came with VS 2005. makecert -r -pe -n "CN=whatever" -b 01/01/2010 -e 01/01/2011 -sky exchange whatever.cer -sv whatever.pvk pvk2pfx.exe -pvk whatever.pvk -spc whatever.cer -pfx whatever.pfx Then I installed the .pfx to my personal certificate directory, and installed the .cer into the WebLogic SAML Identity Asserter V2. I read on another site that formatting the response to be readable (ie, adding whitespace) to the response after signing would cause this problem, so I tried various combinations of turning on/off .Indent XMLWriterSettings and turning on/off .PreserveWhiteSpace when loading the XML document, and none of it made any difference. I've printed the SignatureValue both before the message is is encoded/sent and after it arrives/gets decoded, and they are the same. So, to be clear: the Response appears to be formed, encoded, sent, and decoded fine (I see the full Response in the WebLogic logs). WebLogic finds the certificate I want it to use, verifies that a key was supplied, gets the signed info, and then fails to validate the signature. Code: public string createResponse(Dictionary<string, string> attributes){ ResponseType response = new ResponseType(); // Create Response response.ResponseID = "_" + Guid.NewGuid().ToString(); response.MajorVersion = "1"; response.MinorVersion = "1"; response.IssueInstant = System.DateTime.UtcNow; response.Recipient = "http://theWLServer/samlacs/acs"; StatusType status = new StatusType(); status.StatusCode = new StatusCodeType(); status.StatusCode.Value = new XmlQualifiedName("Success", "urn:oasis:names:tc:SAML:1.0:protocol"); response.Status = status; // Create Assertion AssertionType assertionType = CreateSaml11Assertion(attributes); response.Assertion = new AssertionType[] {assertionType}; //Serialize XmlSerializerNamespaces ns = new XmlSerializerNamespaces(); ns.Add("samlp", "urn:oasis:names:tc:SAML:1.0:protocol"); ns.Add("saml", "urn:oasis:names:tc:SAML:1.0:assertion"); XmlSerializer responseSerializer = new XmlSerializer(response.GetType()); StringWriter stringWriter = new StringWriter(); XmlWriterSettings settings = new XmlWriterSettings(); settings.OmitXmlDeclaration = true; settings.Indent = false;//I've tried both ways, for the fun of it settings.Encoding = Encoding.UTF8; XmlWriter responseWriter = XmlTextWriter.Create(stringWriter, settings); responseSerializer.Serialize(responseWriter, response, ns); responseWriter.Close(); string samlString = stringWriter.ToString(); stringWriter.Close(); // Sign the document XmlDocument doc = new XmlDocument(); doc.PreserveWhiteSpace = true; //also tried this both ways to no avail doc.LoadXml(samlString); X509Certificate2 cert = null; X509Store store = new X509Store(StoreName.My, StoreLocation.CurrentUser); store.Open(OpenFlags.ReadOnly); X509Certificate2Collection coll = store.Certificates.Find(X509FindType.FindBySubjectDistinguishedName, "distName", true); if (coll.Count < 1) { throw new ArgumentException("Unable to locate certificate"); } cert = coll[0]; store.Close(); //this special SignDoc just overrides a function in SignedXml so //it knows to look for ResponseID rather than ID XmlElement signature = SamlHelper.SignDoc( doc, cert, "ResponseID", response.ResponseID); doc.DocumentElement.InsertBefore(signature, doc.DocumentElement.ChildNodes[0]); // Base64Encode and URL Encode byte[] base64EncodedBytes = Encoding.UTF8.GetBytes(doc.OuterXml); string returnValue = System.Convert.ToBase64String( base64EncodedBytes); return returnValue; } private AssertionType CreateSaml11Assertion(Dictionary<string, string> attributes){ AssertionType assertion = new AssertionType(); assertion.AssertionID = "_" + Guid.NewGuid().ToString(); assertion.Issuer = "madeUpValue"; assertion.MajorVersion = "1"; assertion.MinorVersion = "1"; assertion.IssueInstant = System.DateTime.UtcNow; //Not before, not after conditions ConditionsType conditions = new ConditionsType(); conditions.NotBefore = DateTime.UtcNow; conditions.NotBeforeSpecified = true; conditions.NotOnOrAfter = DateTime.UtcNow.AddMinutes(10); conditions.NotOnOrAfterSpecified = true; //Name Identifier to be used in Saml Subject NameIdentifierType nameIdentifier = new NameIdentifierType(); nameIdentifier.NameQualifier = domain.Trim(); nameIdentifier.Value = subject.Trim(); SubjectConfirmationType subjectConfirmation = new SubjectConfirmationType(); subjectConfirmation.ConfirmationMethod = new string[] { "urn:oasis:names:tc:SAML:1.0:cm:bearer" }; // // Create some SAML subject. SubjectType samlSubject = new SubjectType(); AttributeStatementType attrStatement = new AttributeStatementType(); AuthenticationStatementType authStatement = new AuthenticationStatementType(); authStatement.AuthenticationMethod = "urn:oasis:names:tc:SAML:1.0:am:password"; authStatement.AuthenticationInstant = System.DateTime.UtcNow; samlSubject.Items = new object[] { nameIdentifier, subjectConfirmation}; attrStatement.Subject = samlSubject; authStatement.Subject = samlSubject; IPHostEntry ipEntry = Dns.GetHostEntry(System.Environment.MachineName); SubjectLocalityType subjectLocality = new SubjectLocalityType(); subjectLocality.IPAddress = ipEntry.AddressList[0].ToString(); authStatement.SubjectLocality = subjectLocality; attrStatement.Attribute = new AttributeType[attributes.Count]; int i=0; // Create SAML attributes. foreach (KeyValuePair<string, string> attribute in attributes) { AttributeType attr = new AttributeType(); attr.AttributeName = attribute.Key; attr.AttributeNamespace= domain; attr.AttributeValue = new object[] {attribute.Value}; attrStatement.Attribute[i] = attr; i++; } assertion.Conditions = conditions; assertion.Items = new StatementAbstractType[] {authStatement, attrStatement}; return assertion; } private static XmlElement SignDoc(XmlDocument doc, X509Certificate2 cert2, string referenceId, string referenceValue) { // Use our own implementation of SignedXml SamlSignedXml sig = new SamlSignedXml(doc, referenceId); // Add the key to the SignedXml xmlDocument. sig.SigningKey = cert2.PrivateKey; // Create a reference to be signed. Reference reference = new Reference(); reference.Uri= String.Empty; reference.Uri = "#" + referenceValue; // Add an enveloped transformation to the reference. XmlDsigEnvelopedSignatureTransform env = new XmlDsigEnvelopedSignatureTransform(); reference.AddTransform(env); // Add the reference to the SignedXml object. sig.AddReference(reference); // Add an RSAKeyValue KeyInfo (optional; helps recipient find key to validate). KeyInfo keyInfo = new KeyInfo(); keyInfo.AddClause(new KeyInfoX509Data(cert2)); sig.KeyInfo = keyInfo; // Compute the signature. sig.ComputeSignature(); // Get the XML representation of the signature and save // it to an XmlElement object. XmlElement xmlDigitalSignature = sig.GetXml(); return xmlDigitalSignature; } To open the page in my client app, string postData = String.Format("SAMLResponse={0}&APID=ap_00001&TARGET={1}", System.Web.HttpUtility.UrlEncode(builder.buildResponse("http://theWLServer/samlacs/acs",attributes)), "http://desiredURL"); webBrowser.Navigate("http://theWLServer/samlacs/acs", "_self", Encoding.UTF8.GetBytes(postData), "Content-Type: application/x-www-form-urlencoded");

Read the article

Customize the SimpleMembership in ASP.NET MVC 4.0

- by thangchung

As we know, .NET 4.5 have come up to us, and come along with a lot of new interesting features as well. Visual Studio 2012 was also introduced some days ago. They made us feel very happy with cool improvement along with us. Performance when loading code editor is very good at the moment (immediate after click on the solution). I explore some of cool features at these days. Some of them like Json.NET integrated in ASP.NET MVC 4.0, improvement on asynchronous action, new lightweight theme on Visual Studio, supporting very good on mobile development, improvement on authentication… I reviewed them, and found out that in this version of .NET Microsoft was not only developed new feature that suggest from community but also focused on improvement performance of existing features or components. Besides that, they also opened source more projects, like Entity Framework, Reactive Extensions, ASP.NET Web Stack… At the moment, I feel Microsoft want to open source more and more their projects. Today, I am going to dive in deep on new SimpleMembership model. It is really good because in this security model, Microsoft actually focus on development needs. As we know, in the past, they introduce some of provider supplied for coding security like MembershipProvider, RoleProvider… I don’t need to talk but everyone that have ever used it know that they were actually hard to use, and not easy to maintain and unit testing. Why? Because every time you inherit it, you need to override all methods inside it. Some people try to abstract it by introduce more method with virtual keyword, and try to implement basic behavior, so in the subclass we only need to override the method that need for their business. But to me, it’s only the way to work around. ASP.NET team and Web Matrix knew about it, so they built the new features based on existing components on .NET framework. And one of component that comes to us is SimpleMembership and SimpleRole. They implemented the Façade pattern on the top of those, and called it is WebSecurity. In the web, we can call WebSecurity anywhere we want, and make a call to inside wrapper of it. I read a lot of them on web blog, on technical news, on MSDN as well. Matthew Osborn had an excellent article about it at his blog. Jon Galloway had an article like this at here. He analyzed why old membership provider not fixed well to ASP.NET MVC and how to get over it. Those are very good to me. It introduced to me about how to doing SimpleMembership on it, how to doing it on new ASP.NET MVC web application. But one thing, those didn’t tell me was how to doing it on existing security model (that mean we already had Users and Roles on legacy system, and how we can integrate it to this system), that’s a reason I will introduce it today. I have spent couples of hours to see what’s inside this, and try to make one example to clarify my concern. And it’s lucky that I can make it working well.The first thing, we need to create new ASP.NET MVC application on Visual Studio 2012. We need to choose Internet type for this web application. ASP.NET MVC actually creates all needs components for the basic membership and basic role. The cool feature is DoNetOpenAuth come along with it that means we can log-in using facebook, twitter or Windows Live if you want. But it’s only for LocalDb, so we need to change it to fix with existing database model on SQL Server. The next step we have to make SimpleMembership can understand which database we use and show it which column need to point to for the ID and UserName. I really like this feature because SimpleMembership on need to know about the ID and UserName, and they don’t care about rest of it. I assume that we have an existing database model like So we will point it in code like The codes for it, we put on InitializeSimpleMembershipAttribute like [AttributeUsage(AttributeTargets.Class | AttributeTargets.Method, AllowMultiple = false, Inherited = true)] public sealed class InitializeSimpleMembershipAttribute : ActionFilterAttribute { private static SimpleMembershipInitializer _initializer; private static object _initializerLock = new object(); private static bool _isInitialized; public override void OnActionExecuting(ActionExecutingContext filterContext) { // Ensure ASP.NET Simple Membership is initialized only once per app start LazyInitializer.EnsureInitialized(ref _initializer, ref _isInitialized, ref _initializerLock); } private class SimpleMembershipInitializer { public SimpleMembershipInitializer() { try { WebSecurity.InitializeDatabaseConnection("DefaultDb", "User", "Id", "UserName", autoCreateTables: true); } catch (Exception ex) { throw new InvalidOperationException("The ASP.NET Simple Membership database could not be initialized. For more information, please see http://go.microsoft.com/fwlink/?LinkId=256588", ex); } } } }And decorating it in the AccountController as below [Authorize] [InitializeSimpleMembership] public class AccountController : ControllerIn this case, assuming that we need to override the ValidateUser to point this to existing User database table, and validate it. We have to add one more class like public class CustomAdminMembershipProvider : SimpleMembershipProvider { // TODO: will do a better way private const string SELECT_ALL_USER_SCRIPT = "select * from [dbo].[User]private where UserName = '{0}'"; private readonly IEncrypting _encryptor; private readonly SimpleSecurityContext _simpleSecurityContext; public CustomAdminMembershipProvider(SimpleSecurityContext simpleSecurityContext) : this(new Encryptor(), new SimpleSecurityContext("DefaultDb")) { } public CustomAdminMembershipProvider(IEncrypting encryptor, SimpleSecurityContext simpleSecurityContext) { _encryptor = encryptor; _simpleSecurityContext = simpleSecurityContext; } public override bool ValidateUser(string username, string password) { if (string.IsNullOrEmpty(username)) { throw new ArgumentException("Argument cannot be null or empty", "username"); } if (string.IsNullOrEmpty(password)) { throw new ArgumentException("Argument cannot be null or empty", "password"); } var hash = _encryptor.Encode(password); using (_simpleSecurityContext) { var users = _simpleSecurityContext.Users.SqlQuery( string.Format(SELECT_ALL_USER_SCRIPT, username)); if (users == null && !users.Any()) { return false; } return users.FirstOrDefault().Password == hash; } } }SimpleSecurityDataContext at here public class SimpleSecurityContext : DbContext { public DbSet<User> Users { get; set; } public SimpleSecurityContext(string connStringName) : base(connStringName) { this.Configuration.LazyLoadingEnabled = true; this.Configuration.ProxyCreationEnabled = false; } protected override void OnModelCreating(DbModelBuilder modelBuilder) { base.OnModelCreating(modelBuilder); modelBuilder.Configurations.Add(new UserMapping()); } }And Mapping for User as below public class UserMapping : EntityMappingBase<User> { public UserMapping() { this.Property(x => x.UserName); this.Property(x => x.DisplayName); this.Property(x => x.Password); this.Property(x => x.Email); this.ToTable("User"); } }One important thing, you need to modify the web.config to point to our customize SimpleMembership <membership defaultProvider="AdminMemberProvider" userIsOnlineTimeWindow="15"> <providers> <clear/> <add name="AdminMemberProvider" type="CIK.News.Web.Infras.Security.CustomAdminMembershipProvider, CIK.News.Web.Infras" /> </providers> </membership> <roleManager enabled="false"> <providers> <clear /> <add name="AdminRoleProvider" type="CIK.News.Web.Infras.Security.AdminRoleProvider, CIK.News.Web.Infras" /> </providers> </roleManager>The good thing at here is we don’t need to modify the code on AccountController. We only need to modify on SimpleMembership and Simple Role (if need). Now build all solutions, run it. We should see a screen like thisIf I login to Twitter button at the bottom of this page, we will be transfer to twitter authentication pageYou have to waiting for a moment Afterwards it will transfer you back to your admin screenYou can find all source codes at my MSDN code. I will really happy if you guys feel free to put some comments as below. It will be helpful to improvement my code in the future. Thank for all your readings.

Read the article

What's up with OCFS2?

- by wcoekaer

On Linux there are many filesystem choices and even from Oracle we provide a number of filesystems, all with their own advantages and use cases. Customers often confuse ACFS with OCFS or OCFS2 which then causes assumptions to be made such as one replacing the other etc... I thought it would be good to write up a summary of how OCFS2 got to where it is, what we're up to still, how it is different from other options and how this really is a cool native Linux cluster filesystem that we worked on for many years and is still widely used. Work on a cluster filesystem at Oracle started many years ago, in the early 2000's when the Oracle Database Cluster development team wrote a cluster filesystem for Windows that was primarily focused on providing an alternative to raw disk devices and help customers with the deployment of Oracle Real Application Cluster (RAC). Oracle RAC is a cluster technology that lets us make a cluster of Oracle Database servers look like one big database. The RDBMS runs on many nodes and they all work on the same data. It's a Shared Disk database design. There are many advantages doing this but I will not go into detail as that is not the purpose of my write up. Suffice it to say that Oracle RAC expects all the database data to be visible in a consistent, coherent way, across all the nodes in the cluster. To do that, there were/are a few options : 1) use raw disk devices that are shared, through SCSI, FC, or iSCSI 2) use a network filesystem (NFS) 3) use a cluster filesystem(CFS) which basically gives you a filesystem that's coherent across all nodes using shared disks. It is sort of (but not quite) combining option 1 and 2 except that you don't do network access to the files, the files are effectively locally visible as if it was a local filesystem. So OCFS (Oracle Cluster FileSystem) on Windows was born. Since Linux was becoming a very important and popular platform, we decided that we would also make this available on Linux and thus the porting of OCFS/Windows started. The first version of OCFS was really primarily focused on replacing the use of Raw devices with a simple filesystem that lets you create files and provide direct IO to these files to get basically native raw disk performance. The filesystem was not designed to be fully POSIX compliant and it did not have any where near good/decent performance for regular file create/delete/access operations. Cache coherency was easy since it was basically always direct IO down to the disk device and this ensured that any time one issues a write() command it would go directly down to the disk, and not return until the write() was completed. Same for read() any sort of read from a datafile would be a read() operation that went all the way to disk and return. We did not cache any data when it came down to Oracle data files. So while OCFS worked well for that, since it did not have much of a normal filesystem feel, it was not something that could be submitted to the kernel mail list for inclusion into Linux as another native linux filesystem (setting aside the Windows porting code ...) it did its job well, it was very easy to configure, node membership was simple, locking was disk based (so very slow but it existed), you could create regular files and do regular filesystem operations to a certain extend but anything that was not database data file related was just not very useful in general. Logfiles ok, standard filesystem use, not so much. Up to this point, all the work was done, at Oracle, by Oracle developers. Once OCFS (1) was out for a while and there was a lot of use in the database RAC world, many customers wanted to do more and were asking for features that you'd expect in a normal native filesystem, a real "general purposes cluster filesystem". So the team sat down and basically started from scratch to implement what's now known as OCFS2 (Oracle Cluster FileSystem release 2). Some basic criteria were : Design it with a real Distributed Lock Manager and use the network for lock negotiation instead of the disk Make it a Linux native filesystem instead of a native shim layer and a portable core Support standard Posix compliancy and be fully cache coherent with all operations Support all the filesystem features Linux offers (ACL, extended Attributes, quotas, sparse files,...) Be modern, support large files, 32/64bit, journaling, data ordered journaling, endian neutral, we can mount on both endian /cross architecture,.. Needless to say, this was a huge development effort that took many years to complete. A few big milestones happened along the way... OCFS2 was development in the open, we did not have a private tree that we worked on without external code review from the Linux Filesystem maintainers, great folks like Christopher Hellwig reviewed the code regularly to make sure we were not doing anything out of line, we submitted the code for review on lkml a number of times to see if we were getting close for it to be included into the mainline kernel. Using this development model is standard practice for anyone that wants to write code that goes into the kernel and having any chance of doing so without a complete rewrite or.. shall I say flamefest when submitted. It saved us a tremendous amount of time by not having to re-fit code for it to be in a Linus acceptable state. Some other filesystems that were trying to get into the kernel that didn't follow an open development model had a lot harder time and a lot harsher criticism. March 2006, when Linus released 2.6.16, OCFS2 officially became part of the mainline kernel, it was accepted a little earlier in the release candidates but in 2.6.16. OCFS2 became officially part of the mainline Linux kernel tree as one of the many filesystems. It was the first cluster filesystem to make it into the kernel tree. Our hope was that it would then end up getting picked up by the distribution vendors to make it easy for everyone to have access to a CFS. Today the source code for OCFS2 is approximately 85000 lines of code. We made OCFS2 production with full support for customers that ran Oracle database on Linux, no extra or separate support contract needed. OCFS2 1.0.0 started being built for RHEL4 for x86, x86-64, ppc, s390x and ia64. For RHEL5 starting with OCFS2 1.2. SuSE was very interested in high availability and clustering and decided to build and include OCFS2 with SLES9 for their customers and was, next to Oracle, the main contributor to the filesystem for both new features and bug fixes. Source code was always available even prior to inclusion into mainline and as of 2.6.16, source code was just part of a Linux kernel download from kernel.org, which it still is, today. So the latest OCFS2 code is always the upstream mainline Linux kernel. OCFS2 is the cluster filesystem used in Oracle VM 2 and Oracle VM 3 as the virtual disk repository filesystem. Since the filesystem is in the Linux kernel it's released under the GPL v2 The release model has always been that new feature development happened in the mainline kernel and we then built consistent, well tested, snapshots that had versions, 1.2, 1.4, 1.6, 1.8. But these releases were effectively just snapshots in time that were tested for stability and release quality. OCFS2 is very easy to use, there's a simple text file that contains the node information (hostname, node number, cluster name) and a file that contains the cluster heartbeat timeouts. It is very small, and very efficient. As Sunil Mushran wrote in the manual : OCFS2 is an efficient, easily configured, quickly installed, fully integrated and compatible, feature-rich, architecture and endian neutral, cache coherent, ordered data journaling, POSIX-compliant, shared disk cluster file system. Here is a list of some of the important features that are included : Variable Block and Cluster sizes Supports block sizes ranging from 512 bytes to 4 KB and cluster sizes ranging from 4 KB to 1 MB (increments in power of 2). Extent-based Allocations Tracks the allocated space in ranges of clusters making it especially efficient for storing very large files. Optimized Allocations Supports sparse files, inline-data, unwritten extents, hole punching and allocation reservation for higher performance and efficient storage. File Cloning/snapshots REFLINK is a feature which introduces copy-on-write clones of files in a cluster coherent way. Indexed Directories Allows efficient access to millions of objects in a directory. Metadata Checksums Detects silent corruption in inodes and directories. Extended Attributes Supports attaching an unlimited number of name:value pairs to the file system objects like regular files, directories, symbolic links, etc. Advanced Security Supports POSIX ACLs and SELinux in addition to the traditional file access permission model. Quotas Supports user and group quotas. Journaling Supports both ordered and writeback data journaling modes to provide file system consistency in the event of power failure or system crash. Endian and Architecture neutral Supports a cluster of nodes with mixed architectures. Allows concurrent mounts on nodes running 32-bit and 64-bit, little-endian (x86, x86_64, ia64) and big-endian (ppc64) architectures. In-built Cluster-stack with DLM Includes an easy to configure, in-kernel cluster-stack with a distributed lock manager. Buffered, Direct, Asynchronous, Splice and Memory Mapped I/Os Supports all modes of I/Os for maximum flexibility and performance. Comprehensive Tools Support Provides a familiar EXT3-style tool-set that uses similar parameters for ease-of-use. The filesystem was distributed for Linux distributions in separate RPM form and this had to be built for every single kernel errata release or every updated kernel provided by the vendor. We provided builds from Oracle for Oracle Linux and all kernels released by Oracle and for Red Hat Enterprise Linux. SuSE provided the modules directly for every kernel they shipped. With the introduction of the Unbreakable Enterprise Kernel for Oracle Linux and our interest in reducing the overhead of building filesystem modules for every minor release, we decide to make OCFS2 available as part of UEK. There was no more need for separate kernel modules, everything was built-in and a kernel upgrade automatically updated the filesystem, as it should. UEK allowed us to not having to backport new upstream filesystem code into an older kernel version, backporting features into older versions introduces risk and requires extra testing because the code is basically partially rewritten. The UEK model works really well for continuing to provide OCFS2 without that extra overhead. Because the RHEL kernel did not contain OCFS2 as a kernel module (it is in the source tree but it is not built by the vendor in kernel module form) we stopped adding the extra packages to Oracle Linux and its RHEL compatible kernel and for RHEL. Oracle Linux customers/users obviously get OCFS2 included as part of the Unbreakable Enterprise Kernel, SuSE customers get it by SuSE distributed with SLES and Red Hat can decide to distribute OCFS2 to their customers if they chose to as it's just a matter of compiling the module and making it available. OCFS2 today, in the mainline kernel is pretty much feature complete in terms of integration with every filesystem feature Linux offers and it is still actively maintained with Joel Becker being the primary maintainer. Since we use OCFS2 as part of Oracle VM, we continue to look at interesting new functionality to add, REFLINK was a good example, and as such we continue to enhance the filesystem where it makes sense. Bugfixes and any sort of code that goes into the mainline Linux kernel that affects filesystems, automatically also modifies OCFS2 so it's in kernel, actively maintained but not a lot of new development happening at this time. We continue to fully support OCFS2 as part of Oracle Linux and the Unbreakable Enterprise Kernel and other vendors make their own decisions on support as it's really a Linux cluster filesystem now more than something that we provide to customers. It really just is part of Linux like EXT3 or BTRFS etc, the OS distribution vendors decide. Do not confuse OCFS2 with ACFS (ASM cluster Filesystem) also known as Oracle Cloud Filesystem. ACFS is a filesystem that's provided by Oracle on various OS platforms and really integrates into Oracle ASM (Automatic Storage Management). It's a very powerful Cluster Filesystem but it's not distributed as part of the Operating System, it's distributed with the Oracle Database product and installs with and lives inside Oracle ASM. ACFS obviously is fully supported on Linux (Oracle Linux, Red Hat Enterprise Linux) but OCFS2 independently as a native Linux filesystem is also, and continues to also be supported. ACFS is very much tied into the Oracle RDBMS, OCFS2 is just a standard native Linux filesystem with no ties into Oracle products. Customers running the Oracle database and ASM really should consider using ACFS as it also provides storage/clustered volume management. Customers wanting to use a simple, easy to use generic Linux cluster filesystem should consider using OCFS2. To learn more about OCFS2 in detail, you can find good documentation on http://oss.oracle.com/projects/ocfs2 in the Documentation area, or get the latest mainline kernel from http://kernel.org and read the source. One final, unrelated note - since I am not always able to publicly answer or respond to comments, I do not want to selectively publish comments from readers. Sometimes I forget to publish comments, sometime I publish them and sometimes I would publish them but if for some reason I cannot publicly comment on them, it becomes a very one-sided stream. So for now I am going to not publish comments from anyone, to be fair to all sides. You are always welcome to email me and I will do my best to respond to technical questions, questions about strategy or direction are sometimes not possible to answer for obvious reasons.

Read the article

Oracle Data Integrator 11.1.1.5 Complex Files as Sources and Targets

- by Alex Kotopoulis

Overview ODI 11.1.1.5 adds the new Complex File technology for use with file sources and targets. The goal is to read or write file structures that are too complex to be parsed using the existing ODI File technology. This includes: Different record types in one list that use different parsing rules Hierarchical lists, for example customers with nested orders Parsing instructions in the file data, such as delimiter types, field lengths, type identifiers Complex headers such as multiple header lines or parseable information in header Skipping of lines Conditional or choice fields Similar to the ODI File and XML File technologies, the complex file parsing is done through a JDBC driver that exposes the flat file as relational table structures. Complex files are mapped to one or more table structures, as opposed to the (simple) file technology, which always has a one-to-one relationship between file and table. The resulting set of tables follows the same concept as the ODI XML driver, table rows have additional PK-FK relationships to express hierarchy as well as order values to maintain the file order in the resulting table. The parsing instruction format used for complex files is the nXSD (native XSD) format that is already in use with Oracle BPEL. This format extends the XML Schema standard by adding additional parsing instructions to each element. Using nXSD parsing technology, the native file is converted into an internal XML format. It is important to understand that the XML is streamed to improve performance; there is no size limitation of the native file based on memory size, the XML data is never fully materialized. The internal XML is then converted to relational schema using the same mapping rules as the ODI XML driver. How to Create an nXSD file Complex file models depend on the nXSD schema for the given file. This nXSD file has to be created using a text editor or the Native Format Builder Wizard that is part of Oracle BPEL. BPEL is included in the ODI Suite, but not in standalone ODI Enterprise Edition. The nXSD format extends the standard XSD format through nxsd attributes. NXSD is a valid XML Schema, since the XSD standard allows extra attributes with their own namespaces. The following is a sample NXSD schema: <?xml version="1.0"?> <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd" elementFormDefault="qualified" xmlns:tns="http://xmlns.oracle.com/pcbpel/demoSchema/csv" targetNamespace="http://xmlns.oracle.com/pcbpel/demoSchema/csv" attributeFormDefault="unqualified" nxsd:encoding="US-ASCII" nxsd:stream="chars" nxsd:version="NXSD"> <xsd:element name="Root"> <xsd:complexType><xsd:sequence> <xsd:element name="Header"> <xsd:complexType><xsd:sequence> <xsd:element name="Branch" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy=","/> <xsd:element name="ListDate" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}"/> </xsd:sequence></xsd:complexType> </xsd:element> </xsd:sequence></xsd:complexType> <xsd:element name="Customer" maxOccurs="unbounded"> <xsd:complexType><xsd:sequence> <xsd:element name="Name" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy=","/> <xsd:element name="Street" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," /> <xsd:element name="City" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" /> </xsd:sequence></xsd:complexType> </xsd:element> </xsd:sequence></xsd:complexType> </xsd:element> </xsd:schema> The nXSD schema annotates elements to describe their position and delimiters within the flat text file. The schema above uses almost exclusively the nxsd:terminatedBy instruction to look for the next terminator chars. There are various constructs in nXSD to parse fixed length fields, look ahead in the document for string occurences, perform conditional logic, use variables to remember state, and many more. nXSD files can either be written manually using an XML Schema Editor or created using the Native Format Builder Wizard. Both Native Format Builder Wizard as well as the nXSD language are described in the Application Server Adapter Users Guide. The way to start the Native Format Builder in BPEL is to create a new File Adapter; in step 8 of the Adapter Configuration Wizard a new Schema for Native Format can be created: The Native Format Builder guides through a number of steps to generate the nXSD based on a sample native file. If the format is complex, it is often a good idea to “approximate” it with a similar simple format and then add the complex components manually. The resulting *.xsd file can be copied and used as the format for ODI, other BPEL constructs such as the file adapter definition are not relevant for ODI. Using this technique it is also possible to parse the same file format in SOA Suite and ODI, for example using SOA for small real-time messages, and ODI for large batches. This nXSD schema in this example describes a file with a header row containing data and 3 string fields per row delimited by commas, for example: Redwood City Downtown Branch, 06/01/2011 Ebeneezer Scrooge, Sandy Lane, Atherton Tiny Tim, Winton Terrace, Menlo Park The ODI Complex File JDBC driver exposes the file structure through a set of relational tables with PK-FK relationships. The tables for this example are: Table ROOT (1 row): ROOTPK Primary Key for root element SNPSFILENAME Name of the file SNPSFILEPATH Path of the file SNPSLOADDATE Date of load Table HEADER (1 row): ROOTFK Foreign Key to ROOT record ROWORDER Order of row in native document BRANCH Data BRANCHORDER Order of Branch within row LISTDATE Data LISTDATEORDER Order of ListDate within row Table ADDRESS (2 rows): ROOTFK Foreign Key to ROOT record ROWORDER Order of row in native document NAME Data NAMEORDER Oder of Name within row STREET Data STREETORDER Order of Street within row CITY Data CITYORDER Order of City within row Every table has PK and/or FK fields to reflect the document hierarchy through relationships. In this example this is trivial since the HEADER and all CUSTOMER records point back to the PK of ROOT. Deeper nested documents require this to identify parent elements. All tables also have a ROWORDER field to define the order of rows, as well as order fields for each column, in case the order of columns varies in the original document and needs to be maintained. If order is not relevant, these fields can be ignored. How to Create an Complex File Data Server in ODI After creating the nXSD file and a test data file, and storing it on the local file system accessible to ODI, you can go to the ODI Topology Navigator to create a Data Server and Physical Schema under the Complex File technology. This technology follows the conventions of other ODI technologies and is very similar to the XML technology. The parsing settings such as the source native file, the nXSD schema file, the root element, as well as the external database can be set in the JDBC URL: The use of an external database defined by dbprops is optional, but is strongly recommended for production use. Ideally, the staging database should be used for this. Also, when using a complex file exclusively for read purposes, it is recommended to use the ro=true property to ensure the file is not unnecessarily synchronized back from the database when the connection is closed. A data file is always required to be present at the filename path during design-time. Without this file, operations like testing the connection, reading the model data, or reverse engineering the model will fail. All properties of the Complex File JDBC Driver are documented in the Oracle Fusion Middleware Connectivity and Knowledge Modules Guide for Oracle Data Integrator in Appendix C: Oracle Data Integrator Driver for Complex Files Reference. David Allan has created a great viewlet Complex File Processing - 0 to 60 which shows the creation of a Complex File data server as well as a model based on this server. How to Create Models based on an Complex File Schema Once physical schema and logical schema have been created, the Complex File can be used to create a Model as if it were based on a database. When reverse-engineering the Model, data stores(tables) for each XSD element of complex type will be created. Use of complex files as sources is straightforward; when using them as targets it has to be made sure that all dependent tables have matching PK-FK pairs; the same applies to the XML driver as well. Debugging and Error Handling There are different ways to test an nXSD file. The Native Format Builder Wizard can be used even if the nXSD wasn’t created in it; it will show issues related to the schema and/or test data. In ODI, the nXSD will be parsed and run against the existing test XML file when testing a connection in the Dataserver. If either the nXSD has an error or the data is non-compliant to the schema, an error will be displayed. Sample error message: Error while reading native data. [Line=1, Col=5] Not enough data available in the input, when trying to read data of length "19" for "element with name D1" from the specified position, using "style" as "fixedLength" and "length" as "". Ensure that there is enough data from the specified position in the input. Complex File FAQ Is the size of the native file limited by available memory? No, since the native data is streamed through the driver, only the available space in the staging database limits the size of the data. There are limits on individual field sizes, though; a single large object field needs to fit in memory. Should I always use the complex file driver instead of the file driver in ODI now? No, use the file technology for all simple file parsing tasks, for example any fixed-length or delimited files that just have one row format and can be mapped into a simple table. Because of its narrow assumptions the ODI file driver is easy to configure within ODI and can stream file data without writing it into a database. The complex file driver should be used whenever the use case cannot be handled through the file driver. Are we generating XML out of flat files before we write it into a database? We don’t materialize any XML as part of parsing a flat file, either in memory or on disk. The data produced by the XML parser is streamed in Java objects that just use XSD-derived nXSD schema as its type system. We use the nXSD schema because is the standard for describing complex flat file metadata in Oracle Fusion Middleware, and enables users to share schemas across products. Is the nXSD file interchangeable with SOA Suite? Yes, ODI can use the same nXSD files as SOA Suite, allowing mixed use cases with the same data format. Can I start the Native Format Builder from the ODI Studio? No, the Native Format Builder has to be started from a JDeveloper with BPEL instance. You can get BPEL as part of the SOA Suite bundle. Users without SOA Suite can manually develop nXSD files using XSD editors. When is the database data written back to the native file? Data is synchronized using the SYNCHRONIZE and CREATE FILE commands, and when the JDBC connection is closed. It is recommended to set the ro or read_only property to true when a file is exclusively used for reading so that no unnecessary write-backs occur. Is the nXSD metadata part of the ODI Master or Work Repository? No, the data server definition in the master repository only contains the JDBC URL with file paths; the nXSD files have to be accessible on the file systems where the JDBC driver is executed during production, either by copying or by using a network file system. Where can I find sample nXSD files? The Application Server Adapter Users Guide contains nXSD samples for various different use cases.

Read the article

CodePlex Daily Summary for Tuesday, March 20, 2012

CodePlex Daily Summary for Tuesday, March 20, 2012Popular ReleasesNearforums - ASP.NET MVC forum engine: Nearforums v8.0: Version 8.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: Internationalization Custom authentication provider Access control list for forums and threads Webdeploy package checksum: abc62990189cf0d488ef915d4a55e4b14169bc01BIDS Helper: BIDS Helper 1.6: This beta release is the first to support SQL Server 2012 (in addition to SQL Server 2005, 2008, and 2008 R2). Since it is marked as a beta release, we are looking for bug reports in the next few months as you use BIDS Helper on real projects. In addition to getting all existing BIDS Helper functionality working appropriately in SQL Server 2012 (SSDT), the following features are new... Analysis Services Tabular Smart Diff Tabular Actions Editor Tabular HideMemberIf Tabular Pre-Build ...JavaScript Web Resource Manager for Microsoft Dynamics CRM 2011: JavaScript Web Resource Manager (1.2.1420.191): BUG FIXED : When loading scripts from disk, the import of the web resource didn't do anything When scripts were saved to disk, it wasn't possible to edit them with an editorSQL Monitor - managing sql server performance: SQLMon 4.2 alpha 12: 1. improved process visualizer, now shows how many dead locks, and what are the locked objects 2. fixed some other problems.Json.NET: Json.NET 4.5 Release 1: New feature - Windows 8 Metro build New feature - JsonTextReader automatically reads ISO strings as dates New feature - Added DateFormatHandling to control whether dates are written in the MS format or ISO format, with ISO as the default New feature - Added DateTimeZoneHandling to control reading and writing DateTime time zone details New feature - Added async serialize/deserialize methods to JsonConvert New feature - Added Path to JsonReader/JsonWriter/ErrorContext and exceptions w...SCCM Client Actions Tool: SCCM Client Actions Tool v1.11: SCCM Client Actions Tool v1.11 is the latest version. It comes with following changes since last version: Fixed a bug when ping and cmd.exe kept running in endless loop after action progress was finished. Fixed update checking from Codeplex RSS feed. The tool is downloadable as a ZIP file that contains four files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA...WebSocket4Net: WebSocket4Net 0.5: Changes in this release fixed the wss's default port bug improved JsonWebSocket supported set client access policy protocol for silverlight fixed a handshake issue in Silverlight fixed a bug that "Host" field in handshake hadn't contained port if the port is not default supported passing in Origin parameter for handshaking supported reacting pings from server side fixed a bug in data sending fixed the bug sending a closing handshake with no message which would cause an excepti...SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.5: Changes included in this release: supported closing handshake queue checking improved JSON subprotocol supported sending ping from server to client fixed a bug about sending a closing handshake with no message refactored the code to improve protocol compatibility fixed a bug about sub protocol configuration loading in Mono improved BasicSubProtocol added JsonWebSocketSessionDaun Management Studio: Daun Management Studio 0.1 (Alpha Version): These are these the alpha application packages for Daun Management Studio to manage MongoDB Server. Please visit our official website http://www.daun-project.comSurvey™ - web survey & form engine: Survey™ 2.0: The new stable Survey™ Project 2.0.0.1 version contains many new features like: Technical changes: - Use of Jquery, ASTreeview, Tabs, Tooltips and new menuprovider Features & Bugfixes: Survey list and search function Folder structure for surveys New Menustructure Library list New Library fields User list and search functions Layout options for a survey with CSS, page header and footer New IP filter security feature Enhanced Token Management New Question fields as ID, Alias...RiP-Ripper & PG-Ripper: RiP-Ripper 2.9.28: changes NEW: Added Support for "PixHub.eu" linksSmartNet: V1.0.0.0: DY SmartNet ?????? V1.0callisto: callisto 2.0.21: Added an option to disable local host detection.Javascript .NET: Javascript .NET v0.6: Upgraded to the latest stable branch of v8 (/tags/3.9.18), and switched to using their scons build system. We no longer include v8 source code as part of this project's source code. Simultaneous multithreaded use of v8 now supported (v8 Isolates), although different contexts may not share objects or call each other. 64-bit .Net 4.0 DLL now included. (Download now includes x86 and x64 for both .Net 3.5 and .Net 4.0.)MyRouter (Virtual WiFi Router): MyRouter 1.0.6: This release should be more stable there were a few bug fixes including the x64 issue as well as an error popping up when MyRouter started this was caused by a NULL valueGoogle Books Downloader for Windows: Google Books Downloader-2.0.0.0.: Google Books DownloaderFinestra Virtual Desktops: 2.5.4501: This is a very minor update release. Please see the information about the 2.5 and 2.5.4500 releases for more information on recent changes. This update did not even have an automatic update triggered for it. Adds error checking and reporting to all threads, not only those with message loopsAcDown????? - Anime&Comic Downloader: AcDown????? v3.9.2: ?? ●AcDown??????????、??、??????，????1M，????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。??????AcPlay?????，??????、????????????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)，?????"?????????"??? ??????????????，??????????： ??"AcDo...ArcGIS Editor for OpenStreetMap: ArcGIS Editor for OSM 2.0 Release Candidate: Your feedback is welcome - and this is your last chance to get your fixes in for this version! Includes installer for both Feature Server extension and Desktop extension, enhanced functionality for the Desktop tools, and enhanced built-in Javascript Editor for the Feature Server component. This release candidate includes fixes to beta 4 that accommodate domain users for setting up the Server Component, and fixes for reporting/uploading references tracked in the revision table. See Code In-P...C.B.R. : Comic Book Reader: CBR 0.6: 20 Issue trackers are closed and a lot of bugs too Localize view is now MVVM and delete is working. Added the unused flag (take care that it goes to true only when displaying screen elements) Backstage - new input/output format choice control for the conversion Backstage - Add display, behaviour and register file type options in the extended options dialog Explorer list view has been transformed to a custom control. New group header, colunms order and size are saved Single insta...New Projects{3S} SQL Smart Security "Protect your T-SQL know-how!": {3S} SQL Smart Security is an add-in which can be installed in Microsoft SQL Server Management Studio (SSMS). It enables software companies to create a secured content for database objects. The add-in brings much higher level of protection in comparison with SQL Server built in WITH ENCRYPTION feature.BETA - Content Slider for SharePoint 2010 / Office 365: SharePoint Banner / SharePoint 2010 Sliding Banner / Content Slider tools in Office 365/ Sliding Content in SharePoint is a general tool which could be used for sliding Banners or any other sliding content to be placed on any Office 365 / SharePoint 2010 / SharePoint Foundation.BF3 Development Server: The main issue of this project is to deliver a test server to all developers working on RCon (Remote-Administration-Console) Tools for Battlefield 3. Actually the only possibility to test the work made is to hire a real Game Server. BizTalk Server 2010 TCP/IP Adapter: This project is migration of existing BizTalk server 2009 TCPIP adapter to BizTalk server 2010. I have made few configuration changes which are making this adapter and installation compatible to BizTalk Server 2010. I have not modified adapter source code.BryhtCommon: It`s for easy to develope WP7 ,it contains some useful method Bug.Net Defect Tracking Components: Bug.Net server-side controls and components to add defect (bug) tracking to your current ASP.NET website.Customize Survey With Client Object Model: Customize OOB Survey/Vote/Poll in Share?Point With Client Object Model Visit http://swatipoint.blogspot.in/2011/12/sharepoint-client-object-modellist.html for more detailsDropboxToDo: A simple todo, synchronizing by Dropbox or, in future, by SkydriveFoggy: Foggy is a WPF dashboard for FogBugz information.Fort Myers High School Website: A website for Fort Myers High School in Fort Myers, Florida. This website will allow for both students and parents to better interact with the school. Developed in ASP.net (C#).Gonte.DataAccess: Data access for NET. It's developed in C#.Gonte.ObjectModel: Metadata about objects. It's developed in C#Gonte.SqlGenerator: Sql Generator It's developed in C#.kLib: This project space is for datastructures and classes, which should always be available. Any developer should use these in their projects. Liuyi.Phone.CharmScreen: Liuyi.Phone.CharmScreen Liuyi windows phone appLoU: Lord of Ultima helper suite.Managing Supplies: This WP7 project is able to manage your own suppliesNAV Fixed Assets 2012: Changes related to 'Dossier Fiscal' in Microsoft Dynamics NAV 2009 - New Model 30 - Changes to model 31 and model 32NCAA Tourney DotNetNuke Module: The NCAA Tourney is a DotNetNuke 3.X - 6.X module that allows you to add a NCAA tournament to your portal. You can allow users to record their picks for the tournament and then manage the outcome of the tournament calculating the winner of your tourney based on customizable point system. The module has been designed to be very user friendly and efficient for the end user as well as the administrator of the tournament.nothing here anymore: nothing here anymoreOrchard Dream Store Project: A simple website using Orchard CMS. For a school projectPowerShell Management Library for TEM: A project to provide a PowerShell functionality for managing your Tivoli Endpoint Manager (built upon BigFix technology). You can locally or remotely manage endpoints and relays via these simple and easy to use PowerShell Module.PrismWebBuilder: Web Builder ProjectProjeto Northwind: Northwind - FPUQLCF: QLCFShipwire API: Shipwire makes it easier for consumers of Shipwire's international shipment fulfilment service to integrate their XML API quickly and easily. Current features are: Inventory Service Rate Service (Shipping Costs) Future features are: Order Entry Service Order Tracking ServiceSmith XNA tools: Smith's XNA tools is a set of useful that i make to improve some basics features to XNA and make the Game Design More Easy.ST Recover: ST Recover can read Atari ST floppy disks on a PC under Windows, including special formats as 800 or 900 KB and damaged or desynchronized disks, and produces standard .ST disk image files. Then the image files can be read in ST emulators as WinSTon or Steem.SyncSMS: Windows desktop client for the Android App SyncSMS. This code is not affiliated with SyncSMS in any way,tempzz: tempzzTruxtor: Truxtor modular concept for electronic gadgetsTT SA TEST1: TT SA Test 1VisualQuantCode: Neuroquants is a library in c# for quants It's developed in c#.Weeps: Generate Bass and drum line in type of midi to be guitar's backing track that was playing by userxxtest: xxtest???-????? "???????????": ?????-????????? ???????????? Digital Design 2012. ??? ????. ?????? ?: ?????????????????? ??????? ?????. ??????? ?????????? ????????? ????????. ?????????? ?????????????? ??????? ??????? ? ????? ???????????? Digital Design 2012.????? ???????????? Digital Design 2012. ??? ????. ?????? ?: ?????????????????? ??????? ?????. ??????? ?????????? ????????? ????????. ?????????? ?????????????? ??????? ??????? ? ????? ???????????? Digital Design 2012.

Read the article

CodePlex Daily Summary for Wednesday, May 16, 2012

CodePlex Daily Summary for Wednesday, May 16, 2012Popular ReleasesWatchersNET.UrlShorty: WatchersNET.UrlShorty 01.03.03: changes Fixed Url & Error History when urls contain line breaksMetadata Document Generator for Microsoft Dynamics CRM 2011: Metadata Document Generator (1.0.320.91): NEW FEATURES Use of GemBox Software Document assembly to generate Word document Thanks to them! http://www.gemboxsoftware.com/ Word document is now using headings for better navigation BUG FIXES Export fails if two entities have same display name Export fails if entity has more than one main form Clicking multiple time on "Check all" button duplicate attributes list Not working if attributes are Selected Unable to create connection on Partner VM Does not generate document in other than main ...AspxCommerce: AspxCommerce1.1: AspxCommerce - 'Flexible and easy eCommerce platform' offers a complete e-Commerce solution that allows you to build and run your fully functional online store in minutes. You can create your storefront; manage the products through categories and subcategories, accept payments through credit cards and ship the ordered products to the customers. We have everything set up for you, so that you can only focus on building your own online store. Note: To login as a superuser, the username and pass...SiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor (1.1.1616.403): BUG FIX Hide save button when Titles or Descriptions element is selectedVisual C++ 2010 Directories Editor: Visual C++ 2010 Directories Editor (x32_x64): release v1.3MapWindow 6 Desktop GIS: MapWindow 6.1.2: Looking for a .Net GIS Map Application?MapWindow 6 Desktop GIS is an open source desktop GIS for Microsoft Windows that is built upon the DotSpatial Library. This release requires .Net 4 (Client Profile). Are you a software developer?Instead of downloading MapWindow for development purposes, get started with with the DotSpatial template. The extensions you create from the template can be loaded in MapWindow.DotSpatial: DotSpatial 1.2: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Tutorials are available. Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components ...Mugen Injection: Mugen Injection 2.2.1 (WinRT supported): Added ManagedScopeLifecycle. Increase performance. Added support for resolve 'params'.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.52: Make preprocessor comment-statements nestable; add the ///#IFNDEF statement. (Discussion #355785) Don't throw an error for old-school JScript event handlers, and don't rename them if they aren't global functions.DotNetNuke® Events: 06.00.00: This is a serious release of Events. DNN 6 form pattern - We have take the full route towards DNN6: most notably the incorporation of the DNN6 form pattern with streamlined UX/UI. We have also tried to change all formatting to a div based structure. A daunting task, since the Events module contains a lot of forms. Roger has done a splendid job by going through all the forms in great detail, replacing all table style layouts into the new DNN6 div class="dnnForm XXX" type of layout with chang...LogicCircuit: LogicCircuit 2.12.5.15: Logic Circuit - is educational software for designing and simulating logic circuits. Intuitive graphical user interface, allows you to create unrestricted circuit hierarchy with multi bit buses, debug circuits behavior with oscilloscope, and navigate running circuits hierarchy. Changes of this versionThis release is fixing one but nasty bug. Two functions XOR and XNOR when used with 3 or more inputs were incorrectly evaluating their results. If you have a circuit that is using these functions...GAC Explorer: GACExplorer_x86_Setup: Version 1.0 Features -> Copy assembly(s) to clipboard. -> Copy assembly(s) to local folder. -> Open assembly(s) folder location. -> Support Shortcut keysBlogEngine.NET: BlogEngine.NET 2.6: Get DotNetBlogEngine for 3 Months Free! Click Here for More Info BlogEngine.NET Hosting - 3 months free! Cheap ASP.NET Hosting - $4.95/Month - Click Here!! Click Here for More Info Cheap ASP.NET Hosting - $4.95/Month - Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take...BlackJumboDog: Ver5.6.2: 2012.05.07 Ver5.6.2 (1)　Web???????、????????·????????? (2)　Web???????、?????????? COMSPEC PATHEXT WINDIR SERVERADDR SERVERPORT DOCUMENTROOT SERVERADMIN REMOTE_PORT HTTPACCEPTCHRSET HTTPACCEPTLANGUAGE HTTPACCEPTEXCODINGGardens Point Parser Generator: Gardens Point Parser Generator version 1.5.0: ChangesVersion 1.5.0 contains a number of changes. Error messages are now MSBuild and VS-friendly. The default encoding of the *.y file is Unicode, with an automatic fallback to the previous raw-byte interpretation. The /report option has been improved, as has the automaton tracing facility. New facilities are included that allow multiple parsers to share a common token type. A complete change-log is available as a separate documentation file. The source project has been upgraded to Visual...Media Companion: Media Companion 3.502b: It has been a slow week, but this release addresses a couple of recent bugs: Movies Multi-part Movies - Existing .nfo files that differed in name from the first part, were missed and scraped again. Trailers - MC attempted to scrape info for existing trailers. TV Shows Show Scraping - shows available only in the non-default language would not show up in the main browser. The correct language can now be selected using the TV Show Selector for a single show. General Will no longer prompt for ...NewLife XCode ??????: XCode v8.5.2012.0508、XCoder v4.7.2012.0320: X????： 1，????For .Net 4.0?? XCoder????： 1，???????，????X????，?????? XCode????： 1，Insert/Update/Delete???????????????，???SQL???? 2，IEntityOperate?????? 3，????????IEntityTree 4，????????????????? 5，?????????? 6，??????????????Google Book Downloader: Google Books Downloader Lite 1.0: Google Books Downloader Lite 1.0Python Tools for Visual Studio: 1.5 Alpha: We’re pleased to announce the release of Python Tools for Visual Studio 1.5 Alpha. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including: • Supports Cpython, IronPython, Jython and Pypy • Python editor with advanced member, signature intellisense and refactoring • Code navigation: “Find all refs”, goto definition, and object browser • Local and remote debugging...AD Gallery: AD Gallery 1.2.7: NewsFixed a bug which caused the current thumbnail not to be highlighted Added a hook to take complete control over how descriptions are handled, take a look under Documentation for more info Added removeAllImages()New ProjectsAccountingTest: just to learn asp.net mvc 3 Actucal: With Actucal you can make a calculation model. The model is compiled so you can add it to your projects. It has been developed in C# Also look at mine website (http://www.tronsoft.nl) for more information.AppFabric Caching Administration Services: This project is based on the idea of the current project : AppFabric Caching Admin Tool. This project is under development, a further description will be provide later.ASP.NET Web Chat (Prototype): A prototype web chat client application.bcipad: ipad appCM.Core.Library.dll: CM.Core.Library est une bibliothèque programmé en C# qui contient de nombreuses fonctions basique tel que de la cryptographie, manipulation de chaine de caractères, gestion de fichiers...Coding4Fun Boxing Bots: coding4fun boxing robotselblogdeDynamicsCRM.com!: Bienvenidos a nuestro sitio en CodePlex! Aquí compartiremos código de la comunidad en español de Dynamics CRM. www.elblogdedynamicscrm.com Twitter: http://twitter.com/elblogdeDynCRM Linkedin: http://www.linkedin.com/groups?gid=4258078ExercicioAula2: Projeto de exercício da aula de dotnet.FileListBuilder: Fabrique une liste de nom de fichier en parcourant une arborescence d'un disque. La liste peut être produite en format XML ou XLS. Dans cette liste chaque fichier est documenté, et un lien hypertext est associé. Francis Nino Seisei: This application is a template based code snippet generator for data access applications. It allows full control of the software project because it doesn't generate entire projects, only snippets that save time spent in repetitive tasks. For the next version it will be available in english. Esta aplicación es un generador de fragmentos de código basado en plantillas para aplicaciones de acceso a datos. Fue desarrollado en 15 días por lo cual puede tener uno que otro problema de estabilidad...FsAdo: FsAdo, sounds like falsetto :-), is an F# ADO.NET implementation of database factory and as a simple foundation for data access layer.GroupShop: group shop01321231HU01 Decompression: Hotmail's DeltaSync protocol uses custom compression scheme known as hm-compression or HU01. It is very similar to DEFLATE encoding, which is standardized as RFC 1951, but the bit stream format is different. Earlier work on decompressing these streams was published by Daniel Parnell, but it was merely a disassembled code rewritten to C and it didn't offer insight into the actual format of the data. This code is a clean room implementation of a decoder for HU01 streams.jQuery Media Player: A set of scripts used to play media from the webModel Generator Helper: Model Generator Helper is a small program that will allow you to easily create view models from your logic models by copying the logic model's properties and the properties' attributes. The original purpose of the program was to copy the validation annotations to my view models.muathenhanh: hello tat ca moi nguoi nheMyCommerce: Proyecto aun no terminadonczcomlibary: control library for silverlight 5 OHG.NET: OHG.NET ASP.NET Web Pages (Razor) Based Content Management System Rich Theme Support One-Click JQuery Plugins (Slider, LightBox,Paging...) Web Site Administrator Panel with Twitter Bootstrap Interface Light-weight and high perfomance with ASP.NET Web Pages Razor PgcDemuxCLI: A modified version of PgcDemux (http://download.videohelp.com/jsoto/dvdtools.htm) that has better CLI support and progress reporting.PowerShell Classroom Setup Tools for MS Learning Hyper-V machines: This scripts are intended for MCT! If you set up a MS Learning Classroom with Hyper-V and the images provided by MS at the MCT download page you need to deploy the VHD files (and the other VM files of course) to “C:\Programme\Microsoft Learning\<…>” The 4 scripts in this package will help you to set up your classroom environment at another file system location. Please read my blog article for details: ProjetoTeste: Projeto de testeReisebüro Office: dfgsfgSandbox OS: An all new COSMOS Based OS Built by the Marblestech Team.SSOrbit: Single Sign-On module that store user into a stack.Steve Blog: ???????????，?????SuchMich: Such Mich! is a game based on the famous game "Memory" (also known as "Find the pairs")Tanszeki terheleseloszto rendszer: A Tanszeki terheleseloszto rendszer egy olyan rendszer, amelynek segítségével egy tanszék feladatait lehet az oktatói között elosztani, úgy, hogy közben figyelembe vesszük az oktatók szakmai és személyes preferenciáit, és az órarendi adottságokat.TestApps: an epic testTRAVLR: Travlr Web App for collaborative trip management.WatTMDb Library: .NET Library for use with the new Version 3 API available from The Movie Db.WPF Fundamentals: WPF Fundamentals is a toolset with basic classes to use in any common WPF project. It includes: - support of the Model - ViewModel - Presenter pattern - extension for the Command Interface - common converter types (e.g. a BooleanConverter) - handy user controls (e.g. a PopupButton)

Read the article

Loosely coupled .NET Cache Provider using Dependency Injection

- by Rhames

I have recently been reading the excellent book “Dependency Injection in .NET”, written by Mark Seemann. I do not generally buy software development related books, as I never seem to have the time to read them, but I have found the time to read Mark’s book, and it was time well spent I think. Reading the ideas around Dependency Injection made me realise that the Cache Provider code I wrote about earlier (see http://geekswithblogs.net/Rhames/archive/2011/01/10/using-the-asp.net-cache-to-cache-data-in-a-model.aspx) could be refactored to use Dependency Injection, which should produce cleaner code. The goals are to: Separate the cache provider implementation (using the ASP.NET data cache) from the consumers (loose coupling). This will also mean that the dependency on System.Web for the cache provider does not ripple down into the layers where it is being consumed (such as the domain layer). Provide a decorator pattern to allow a consumer of the cache provider to be implemented separately from the base consumer (i.e. if we have a base repository, we can decorate this with a caching version). Although I used the term repository, in reality the cache consumer could be just about anything. Use constructor injection to provide the Dependency Injection, with a suitable DI container (I use Castle Windsor). The sample code for this post is available on github, https://github.com/RobinHames/CacheProvider.git ICacheProvider In the sample code, the key interface is ICacheProvider, which is in the domain layer. 1: using System; 2: using System.Collections.Generic; 3: 4: namespace CacheDiSample.Domain 5: { 6: public interface ICacheProvider<T> 7: { 8: T Fetch(string key, Func<T> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry); 9: IEnumerable<T> Fetch(string key, Func<IEnumerable<T>> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry); 10: } 11: } This interface contains two methods to retrieve data from the cache, either as a single instance or as an IEnumerable. the second paramerter is of type Func<T>. This is the method used to retrieve data if nothing is found in the cache. The ASP.NET implementation of the ICacheProvider interface needs to live in a project that has a reference to system.web, typically this will be the root UI project, or it could be a separate project. The key thing is that the domain or data access layers do not need system.web references adding to them. In my sample MVC application, the CacheProvider is implemented in the UI project, in a folder called “CacheProviders”: 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Web; 5: using System.Web.Caching; 6: using CacheDiSample.Domain; 7: 8: namespace CacheDiSample.CacheProvider 9: { 10: public class CacheProvider<T> : ICacheProvider<T> 11: { 12: public T Fetch(string key, Func<T> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry) 13: { 14: return FetchAndCache<T>(key, retrieveData, absoluteExpiry, relativeExpiry); 15: } 16: 17: public IEnumerable<T> Fetch(string key, Func<IEnumerable<T>> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry) 18: { 19: return FetchAndCache<IEnumerable<T>>(key, retrieveData, absoluteExpiry, relativeExpiry); 20: } 21: 22: #region Helper Methods 23: 24: private U FetchAndCache<U>(string key, Func<U> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry) 25: { 26: U value; 27: if (!TryGetValue<U>(key, out value)) 28: { 29: value = retrieveData(); 30: if (!absoluteExpiry.HasValue) 31: absoluteExpiry = Cache.NoAbsoluteExpiration; 32: 33: if (!relativeExpiry.HasValue) 34: relativeExpiry = Cache.NoSlidingExpiration; 35: 36: HttpContext.Current.Cache.Insert(key, value, null, absoluteExpiry.Value, relativeExpiry.Value); 37: } 38: return value; 39: } 40: 41: private bool TryGetValue<U>(string key, out U value) 42: { 43: object cachedValue = HttpContext.Current.Cache.Get(key); 44: if (cachedValue == null) 45: { 46: value = default(U); 47: return false; 48: } 49: else 50: { 51: try 52: { 53: value = (U)cachedValue; 54: return true; 55: } 56: catch 57: { 58: value = default(U); 59: return false; 60: } 61: } 62: } 63: 64: #endregion 65: 66: } 67: } The FetchAndCache helper method checks if the specified cache key exists, if it does not, the Func<U> retrieveData method is called, and the results are added to the cache. Using Castle Windsor to register the cache provider In the MVC UI project (my application root), Castle Windsor is used to register the CacheProvider implementation, using a Windsor Installer: 1: using Castle.MicroKernel.Registration; 2: using Castle.MicroKernel.SubSystems.Configuration; 3: using Castle.Windsor; 4: 5: using CacheDiSample.Domain; 6: using CacheDiSample.CacheProvider; 7: 8: namespace CacheDiSample.WindsorInstallers 9: { 10: public class CacheInstaller : IWindsorInstaller 11: { 12: public void Install(IWindsorContainer container, IConfigurationStore store) 13: { 14: container.Register( 15: Component.For(typeof(ICacheProvider<>)) 16: .ImplementedBy(typeof(CacheProvider<>)) 17: .LifestyleTransient()); 18: } 19: } 20: } Note that the cache provider is registered as a open generic type. Consuming a Repository I have an existing couple of repository interfaces defined in my domain layer: IRepository.cs 1: using System; 2: using System.Collections.Generic; 3: 4: using CacheDiSample.Domain.Model; 5: 6: namespace CacheDiSample.Domain.Repositories 7: { 8: public interface IRepository<T> 9: where T : EntityBase 10: { 11: T GetById(int id); 12: IList<T> GetAll(); 13: } 14: } IBlogRepository.cs 1: using System; 2: using CacheDiSample.Domain.Model; 3: 4: namespace CacheDiSample.Domain.Repositories 5: { 6: public interface IBlogRepository : IRepository<Blog> 7: { 8: Blog GetByName(string name); 9: } 10: } These two repositories are implemented in the DataAccess layer, using Entity Framework to retrieve data (this is not important though). One important point is that in the BaseRepository implementation of IRepository, the methods are virtual. This will allow the decorator to override them. The BlogRepository is registered in a RepositoriesInstaller, again in the MVC UI project. 1: using Castle.MicroKernel.Registration; 2: using Castle.MicroKernel.SubSystems.Configuration; 3: using Castle.Windsor; 4: 5: using CacheDiSample.Domain.CacheDecorators; 6: using CacheDiSample.Domain.Repositories; 7: using CacheDiSample.DataAccess; 8: 9: namespace CacheDiSample.WindsorInstallers 10: { 11: public class RepositoriesInstaller : IWindsorInstaller 12: { 13: public void Install(IWindsorContainer container, IConfigurationStore store) 14: { 15: container.Register(Component.For<IBlogRepository>() 16: .ImplementedBy<BlogRepository>() 17: .LifestyleTransient() 18: .DependsOn(new 19: { 20: nameOrConnectionString = "BloggingContext" 21: })); 22: } 23: } 24: } Now I can inject a dependency on the IBlogRepository into a consumer, such as a controller in my sample code: 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Web; 5: using System.Web.Mvc; 6: 7: using CacheDiSample.Domain.Repositories; 8: using CacheDiSample.Domain.Model; 9: 10: namespace CacheDiSample.Controllers 11: { 12: public class HomeController : Controller 13: { 14: private readonly IBlogRepository blogRepository; 15: 16: public HomeController(IBlogRepository blogRepository) 17: { 18: if (blogRepository == null) 19: throw new ArgumentNullException("blogRepository"); 20: 21: this.blogRepository = blogRepository; 22: } 23: 24: public ActionResult Index() 25: { 26: ViewBag.Message = "Welcome to ASP.NET MVC!"; 27: 28: var blogs = blogRepository.GetAll(); 29: 30: return View(new Models.HomeModel { Blogs = blogs }); 31: } 32: 33: public ActionResult About() 34: { 35: return View(); 36: } 37: } 38: } Consuming the Cache Provider via a Decorator I used a Decorator pattern to consume the cache provider, this means my repositories follow the open/closed principle, as they do not require any modifications to implement the caching. It also means that my controllers do not have any knowledge of the caching taking place, as the DI container will simply inject the decorator instead of the root implementation of the repository. The first step is to implement a BlogRepository decorator, with the caching logic in it. Note that this can reside in the domain layer, as it does not require any knowledge of the data access methods. BlogRepositoryWithCaching.cs 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Text; 5: 6: using CacheDiSample.Domain.Model; 7: using CacheDiSample.Domain; 8: using CacheDiSample.Domain.Repositories; 9: 10: namespace CacheDiSample.Domain.CacheDecorators 11: { 12: public class BlogRepositoryWithCaching : IBlogRepository 13: { 14: // The generic cache provider, injected by DI 15: private ICacheProvider<Blog> cacheProvider; 16: // The decorated blog repository, injected by DI 17: private IBlogRepository parentBlogRepository; 18: 19: public BlogRepositoryWithCaching(IBlogRepository parentBlogRepository, ICacheProvider<Blog> cacheProvider) 20: { 21: if (parentBlogRepository == null) 22: throw new ArgumentNullException("parentBlogRepository"); 23: 24: this.parentBlogRepository = parentBlogRepository; 25: 26: if (cacheProvider == null) 27: throw new ArgumentNullException("cacheProvider"); 28: 29: this.cacheProvider = cacheProvider; 30: } 31: 32: public Blog GetByName(string name) 33: { 34: string key = string.Format("CacheDiSample.DataAccess.GetByName.{0}", name); 35: // hard code 5 minute expiry! 36: TimeSpan relativeCacheExpiry = new TimeSpan(0, 5, 0); 37: return cacheProvider.Fetch(key, () => 38: { 39: return parentBlogRepository.GetByName(name); 40: }, 41: null, relativeCacheExpiry); 42: } 43: 44: public Blog GetById(int id) 45: { 46: string key = string.Format("CacheDiSample.DataAccess.GetById.{0}", id); 47: 48: // hard code 5 minute expiry! 49: TimeSpan relativeCacheExpiry = new TimeSpan(0, 5, 0); 50: return cacheProvider.Fetch(key, () => 51: { 52: return parentBlogRepository.GetById(id); 53: }, 54: null, relativeCacheExpiry); 55: } 56: 57: public IList<Blog> GetAll() 58: { 59: string key = string.Format("CacheDiSample.DataAccess.GetAll"); 60: 61: // hard code 5 minute expiry! 62: TimeSpan relativeCacheExpiry = new TimeSpan(0, 5, 0); 63: return cacheProvider.Fetch(key, () => 64: { 65: return parentBlogRepository.GetAll(); 66: }, 67: null, relativeCacheExpiry) 68: .ToList(); 69: } 70: } 71: } The key things in this caching repository are: I inject into the repository the ICacheProvider<Blog> implementation, via the constructor. This will make the cache provider functionality available to the repository. I inject the parent IBlogRepository implementation (which has the actual data access code), via the constructor. This will allow the methods implemented in the parent to be called if nothing is found in the cache. I override each of the methods implemented in the repository, including those implemented in the generic BaseRepository. Each override of these methods follows the same pattern. It makes a call to the CacheProvider.Fetch method, and passes in the parentBlogRepository implementation of the method as the retrieval method, to be used if nothing is present in the cache. Configuring the Caching Repository in the DI Container The final piece of the jigsaw is to tell Castle Windsor to use the BlogRepositoryWithCaching implementation of IBlogRepository, but to inject the actual Data Access implementation into this decorator. This is easily achieved by modifying the RepositoriesInstaller to use Windsor’s implicit decorator wiring: 1: using Castle.MicroKernel.Registration; 2: using Castle.MicroKernel.SubSystems.Configuration; 3: using Castle.Windsor; 4: 5: using CacheDiSample.Domain.CacheDecorators; 6: using CacheDiSample.Domain.Repositories; 7: using CacheDiSample.DataAccess; 8: 9: namespace CacheDiSample.WindsorInstallers 10: { 11: public class RepositoriesInstaller : IWindsorInstaller 12: { 13: public void Install(IWindsorContainer container, IConfigurationStore store) 14: { 15: 16: // Use Castle Windsor implicit wiring for the block repository decorator 17: // Register the outermost decorator first 18: container.Register(Component.For<IBlogRepository>() 19: .ImplementedBy<BlogRepositoryWithCaching>() 20: .LifestyleTransient()); 21: // Next register the IBlogRepository inmplementation to inject into the outer decorator 22: container.Register(Component.For<IBlogRepository>() 23: .ImplementedBy<BlogRepository>() 24: .LifestyleTransient() 25: .DependsOn(new 26: { 27: nameOrConnectionString = "BloggingContext" 28: })); 29: } 30: } 31: } This is all that is needed. Now if the consumer of the repository makes a call to the repositories method, it will be routed via the caching mechanism. You can test this by stepping through the code, and seeing that the DataAccess.BlogRepository code is only called if there is no data in the cache, or this has expired. The next step is to add the SQL Cache Dependency support into this pattern, this will be a future post.

Read the article

These are few objective type questions which i was not able to find the solution [closed]

- by Tarun

1. Which of the following advantages does System.Collections.IDictionaryEnumerator provide over System.Collections.IEnumerator? a. It adds properties for direct access to both the Key and the Value b. It is optimized to handle the structure of a Dictionary. c. It provides properties to determine if the Dictionary is enumerated in Key or Value order d. It provides reverse lookup methods to distinguish a Key from a specific Value 2. When Implementing System.EnterpriseServices.ServicedComponent derived classes, which of the following statements are true? a. Enabling object pooling requires an attribute on the class and the enabling of pooling in the COM+ catalog. b. Methods can be configured to automatically mark a transaction as complete by the use of attributes. c. You can configure authentication using the AuthenticationOption when the ActivationMode is set to Library. d. You can control the lifecycle policy of an individual instance using the SetLifetimeService method. 3. Which of the following are true regarding event declaration in the code below? class Sample { event MyEventHandlerType MyEvent; } a. MyEventHandlerType must be derived from System.EventHandler or System.EventHandler<TEventArgs> b. MyEventHandlerType must take two parameters, the first of the type Object, and the second of a class derived from System.EventArgs c. MyEventHandlerType may have a non-void return type d. If MyEventHandlerType is a generic type, event declaration must use a specialization of that type. e. MyEventHandlerType cannot be declared static 4. Which of the following statements apply to developing .NET code, using .NET utilities that are available with the SDK or Visual Studio? a. Developers can create assemblies directly from the MSIL Source Code. b. Developers can examine PE header information in an assembly. c. Developers can generate XML Schemas from class definitions contained within an assembly. d. Developers can strip all meta-data from managed assemblies. e. Developers can split an assembly into multiple assemblies. 5. Which of the following characteristics do classes in the System.Drawing namespace such as Brush,Font,Pen, and Icon share? a. They encapsulate native resource and must be properly Disposed to prevent potential exhausting of resources. b. They are all MarshalByRef derived classes, but functionality across AppDomains has specific limitations. c. You can inherit from these classes to provide enhanced or customized functionality 6. Which of the following are required to be true by objects which are going to be used as keys in a System.Collections.HashTable? a. They must handle case-sensitivity identically in both the GetHashCode() and Equals() methods. b. Key objects must be immutable for the duration they are used within a HashTable. c. Get HashCode() must be overridden to provide the same result, given the same parameters, regardless of reference equalityl unless the HashTable constructor is provided with an IEqualityComparer parameter. d. Each Element in a HashTable is stored as a Key/Value pair of the type System.Collections.DictionaryElement e. All of the above 7. Which of the following are true about Nullable types? a. A Nullable type is a reference type. b. A Nullable type is a structure. c. An implicit conversion exists from any non-nullable value type to a nullable form of that type. d. An implicit conversion exists from any nullable value type to a non-nullable form of that type. e. A predefined conversion from the nullable type S? to the nullable type T? exists if there is a predefined conversion from the non-nullable type S to the non-nullable type T 8. When using an automatic property, which of the following statements is true? a. The compiler generates a backing field that is completely inaccessible from the application code. b. The compiler generates a backing field that is a private instance member with a leading underscore that can be programmatically referenced. c. The compiler generates a backing field that is accessible via reflection d. The compiler generates a code that will store the information separately from the instance to ensure its security. 9. Which of the following does using Initializer Syntax with a collection as shown below require? CollectionClass numbers = new CollectionClass { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 }; a. The Collection Class must implement System.Collections.Generic.ICollection<T> b. The Collection Class must implement System.Collections.Generic.IList<T> c. Each of the Items in the Initializer List will be passed to the Add<T>(T item) method d. The items in the initializer will be treated as an IEnumerable<T> and passed to the collection constructor+K110 10. What impact will using implicitly typed local variables as in the following example have? var sample = "Hello World"; a. The actual type is determined at compilation time, and has no impact on the runtime b. The actual type is determined at runtime, and late binding takes effect c. The actual type is based on the native VARIANT concept, and no binding to a specific type takes place. d. "var" itself is a specific type defined by the framework, and no special binding takes place 11. Which of the following is not supported by remoting object types? a. well-known singleton b. well-known single call c. client activated d. context-agile 12. In which of the following ways do structs differ from classes? a. Structs can not implement interfaces b. Structs cannot inherit from a base struct c. Structs cannot have events interfaces d. Structs cannot have virtual methods 13. Which of the following is not an unboxing conversion? a. void Sample1(object o) { int i = (int)o; } b. void Sample1(ValueType vt) { int i = (int)vt; } c. enum E { Hello, World} void Sample1(System.Enum et) { E e = (E) et; } d. interface I { int Value { get; set; } } void Sample1(I vt) { int i = vt.Value; } e. class C { public int Value { get; set; } } void Sample1(C vt) { int i = vt.Value; } 14. Which of the following are characteristics of the System.Threading.Timer class? a. The method provided by the TimerCallback delegate will always be invoked on the thread which created the timer. b. The thread which creates the timer must have a message processing loop (i.e. be considered a UI thread) c. The class contains protection to prevent reentrancy to the method provided by the TimerCallback delegate d. You can receive notification of an instance being Disposed by calling an overload of the Dispose method. 15. What is the proper declaration of a method which will handle the following event? Class MyClass { public event EventHandler MyEvent; } a. public void A_MyEvent(object sender, MyArgs e) { } b. public void A_MyEvent(object sender, EventArgs e) { } c. public void A_MyEvent(MyArgs e) { } d. public void A_MyEvent(MyClass sender,EventArgs e) { } 16. Which of the following scenarios are applicable to Window Workflow Foundation? a. Document-centric workflows b. Human workflows c. User-interface page flows d. Builtin support for communications across multiple applications and/or platforms e. All of the above 17. When using an automatic property, which of the following statements is true? a. The compiler generates a backing field that is completely inaccessible from the application code. b. The compiler generates a backing field that is a private instance member with a leading underscore that can be programmatically referenced. c. The compiler generates a backing field that is accessible via reflection d. The compiler generates a code that will store the information separately from the instance to ensure its security. 18 While using the capabilities supplied by the System.Messaging classes, which of the following are true? a. Information must be explicitly converted to/from a byte stream before it uses the MessageQueue class b. Invoking the MessageQueue.Send member defaults to using the System.Messaging.XmlMessageFormatter to serialize the object. c. Objects must be XMLSerializable in order to be transferred over a MessageQueue instance. d. The first entry in a MessageQueue must be removed from the queue before the next entry can be accessed e. Entries removed from a MessageQueue within the scope of a transaction, will be pushed back into the front of the queue if the transaction fails. 19. Which of the following are true about declarative attributes? a. They must be inherited from the System.Attribute. b. Attributes are instantiated at the same time as instances of the class to which they are applied. c. Attribute classes may be restricted to be applied only to application element types. d. By default, a given attribute may be applied multiple times to the same application element. 20. When using version 3.5 of the framework in applications which emit a dynamic code, which of the following are true? a. A Partial trust code can not emit and execute a code b. A Partial trust application must have the SecurityCriticalAttribute attribute have called Assert ReflectionEmit permission c. The generated code no more permissions than the assembly which emitted it. d. It can be executed by calling System.Reflection.Emit.DynamicMethod( string name, Type returnType, Type[] parameterTypes ) without any special permissions Within Windows Workflow Foundation, Compensating Actions are used for: a. provide a means to rollback a failed transaction b. provide a means to undo a successfully committed transaction later c. provide a means to terminate an in process transaction d. achieve load balancing by adapting to the current activity 21. What is the proper declaration of a method which will handle the following event? Class MyClass { public event EventHandler MyEvent; } a. public void A_MyEvent(object sender, MyArgs e) { } b. public void A_MyEvent(object sender, EventArgs e) { } c. public void A_MyEvent(MyArgs e) { } d. public void A_MyEvent(MyClass sender,EventArgs e) { } 22. Which of the following controls allows the use of XSL to transform XML content into formatted content? a. System.Web.UI.WebControls.Xml b. System.Web.UI.WebControls.Xslt c. System.Web.UI.WebControls.Substitution d. System.Web.UI.WebControls.Transform 23. To which of the following do automatic properties refer? a. You declare (explicitly or implicitly) the accessibility of the property and get and set accessors, but do not provide any implementation or backing field b. You attribute a member field so that the compiler will generate get and set accessors c. The compiler creates properties for your class based on class level attributes d. They are properties which are automatically invoked as part of the object construction process 24. Which of the following are true about Nullable types? a. A Nullable type is a reference type. b. An implicit conversion exists from any non-nullable value type to a nullable form of that type. c. A predefined conversion from the nullable type S? to the nullable type T? exists if there is a predefined conversion from the non-nullable type S to the non-nullable type T 25. When using an automatic property, which of the following statements is true? a. The compiler generates a backing field that is completely inaccessible from the application code. b. The compiler generates a backing field that is accessible via reflection. c. The compiler generates a code that will store the information separately from the instance to ensure its security. 26. When using an implicitly typed array, which of the following is most appropriate? a. All elements in the initializer list must be of the same type. b. All elements in the initializer list must be implicitly convertible to a known type which is the actual type of at least one member in the initializer list c. All elements in the initializer list must be implicitly convertible to common type which is a base type of the items actually in the list 27. Which of the following is false about anonymous types? a. They can be derived from any reference type. b. Two anonymous types with the same named parameters in the same order declared in different classes have the same type. c. All properties of an anonymous type are read/write. 28. Which of the following are true about Extension methods. a. They can be declared either static or instance members b. They must be declared in the same assembly (but may be in different source files) c. Extension methods can be used to override existing instance methods d. Extension methods with the same signature for the same class may be declared in multiple namespaces without causing compilation errors

Read the article

What is wrong with my XSLT for the XML File?

- by atrueguy

Actually my XML file has SVG info, and my Project lead wants me to develop an XSLT for the XMl file to convert it in to a PDF file. But when I try to do so I am failing to convert the XML file to PDF, can anyone help me out in this....... My Sample XML file <?xml version="1.0" encoding="ISO-8859-1"?>   <svg width="100%" height="100%" viewBox="0 0 214.819 278.002"> <g id="Standard_x0020_layer"/> <g id="Catalog"> <line stroke-width="0.353" stroke-linecap="butt" x1="5.839" y1="262.185" x2="209.039" y2="262.185"/> <text transform="matrix(0.984 0 0 0.93 183.515 265.271)" stroke="none" fill="#000000" font-family="'Helvetica'" font-size="3.174">© 2009 k Co.</text> <text transform="matrix(0.994 0 0 0.93 7.235 265.3)" stroke="none" fill="#000000" font-family="'Helvetica'" font-size="3.174">087156-8-</text> <text transform="matrix(0.995 0 0 0.93 21.708 265.357)" stroke="none" fill="#000000" font-family="'Helvetica'" font-size="3.174" font-weight="bold">AB</text> <text x="103.292" y="265.298" stroke="none" fill="#000000" font-family="'Helvetica'" font-size="3.174">P. 1/1</text> <g id="IC_TextBlock.1"> <g> <text transform="matrix(0.994 0 0 0.93 192.812 8.076)" stroke="none" fill="#000000" font-family="'Helvetica'" font-size="4.586" font-weight="bold">Fittings</text> <text transform="matrix(0.994 0 0 0.93 188.492 13.323)" stroke="none" fill="#000000" font-family="'Helvetica'" font-size="4.586" font-weight="bold">Raccords</text> <text transform="matrix(0.994 0 0 0.93 183.431 18.571)" stroke="none" fill="#000000" font-family="'Helvetica'" font-size="4.586" font-weight="bold">Conexiones</text> </g> </g> <g> <path stroke="none" fill="#000000" d="M26.507 12.628L26.507 4.977 28.599 4.977 28.599 10.673 30.946 10.673 30.946 12.628 26.507 12.628z"/> <path stroke="none" fill="#000000" d="M19.693 12.628L19.693 4.977 21.785 4.977 21.785 7.66 23.893 7.66 23.893 4.977 25.986 4.977 25.986 12.628 23.893 12.628 23.893 9.782 21.785 9.782 21.785 12.628 19.693 12.628z"/> <path stroke="none" fill="#000000" d="M12.587 4.977L9.566 8.621 13.019 12.631 10.25 12.63 7.905 9.9 7.9 9.9 7.9 12.628 5.81 12.628 5.81 4.977 7.9 4.977 7.9 7.267 7.884 7.27 9.875 4.977 12.587 4.977z"/> <path stroke="none" fill="#000000" d="M11.455 8.739C11.455 6.538 13.221 4.753 15.4 4.753L15.4 6.775C14.419 6.775 13.625 7.653 13.625 8.737 13.625 9.821 14.419 10.699 15.4 10.699 16.382 10.699 17.176 9.821 17.176 8.737 17.176 7.653 16.382 6.775 15.4 6.775L15.4 4.753C17.579 4.753 19.346 6.538 19.346 8.739 19.346 10.941 17.579 12.724 15.4 12.724 13.221 12.724 11.455 10.941 11.455 8.739z"/> <path stroke="none" fill="#000000" d="M33.472 4.977L35.621 4.977 35.621 6.74 33.521 6.743 33.515 7.952 35.454 7.952 35.454 9.664 33.518 9.664 33.518 10.833 35.64 10.833 35.64 12.628 33.491 12.628 31.376 12.628 31.376 4.977 33.472 4.977z"/> <path stroke="none" fill="#000000" d="M39.97 9.57L42.146 12.631 39.862 12.628 38.156 10.279 38.156 12.622 36.107 12.622 36.107 4.974 38.728 4.974 38.741 6.75 38.149 6.75 38.149 8.221 38.741 8.223C39.149 8.223 39.478 7.894 39.478 7.487 39.478 7.08 39.149 6.75 38.741 6.75L38.728 4.974C41.036 4.974 42.5 7.867 39.97 9.57z"/> <path stroke="none" fill="#000000" d="M42.415 12.205C42.415 11.82 42.72 11.512 43.106 11.512 43.49 11.512 43.796 11.82 43.796 12.205 43.796 12.586 43.49 12.894 43.106 12.894L43.106 12.73C43.402 12.73 43.631 12.51 43.631 12.205 43.631 11.894 43.402 11.676 43.106 11.676L43.179 11.837C43.344 11.837 43.457 11.868 43.457 12.057 43.457 12.189 43.39 12.243 43.262 12.252L43.436 12.554 43.262 12.554 43.103 12.252 42.99 12.252 42.99 12.143 43.182 12.143C43.262 12.143 43.308 12.127 43.308 12.035 43.308 11.962 43.216 11.962 43.146 11.962L42.99 11.962 42.99 12.143 42.99 12.252 42.99 12.554 42.832 12.554 42.832 11.837 43.179 11.837 43.106 11.676C42.804 11.676 42.579 11.894 42.579 12.205 42.579 12.51 42.804 12.73 43.106 12.73L43.106 12.894C42.72 12.894 42.415 12.586 42.415 12.205z"/> <g> <path stroke="none" fill="#000000" d="M8.837 17.466L8.599 17.466 8.554 16.832 8.544 16.832C8.31 17.329 7.843 17.539 7.339 17.539 6.243 17.539 5.697 16.675 5.697 15.724 5.697 14.774 6.243 13.91 7.339 13.91 8.071 13.91 8.666 14.305 8.794 15.067L8.461 15.067C8.417 14.666 8.003 14.194 7.339 14.194 6.418 14.194 6.027 14.964 6.027 15.724 6.027 16.486 6.418 17.257 7.339 17.257 8.111 17.257 8.56 16.716 8.544 15.978L7.36 15.978 7.36 15.695 8.837 15.695 8.837 17.466z"/> <path stroke="none" fill="#000000" d="M9.477 13.984L11.881 13.984 11.881 14.266 9.807 14.266 9.807 15.525 11.749 15.525 11.749 15.807 9.807 15.807 9.807 17.182 11.906 17.182 11.906 17.466 9.477 17.466 9.477 13.984z"/> <path stroke="none" fill="#000000" d="M12.364 13.984L12.734 13.984 14.763 16.929 14.772 16.929 14.772 13.984 15.105 13.984 15.105 17.466 14.734 17.466 12.705 14.521 12.695 14.521 12.695 17.466 12.364 17.466 12.364 13.984z"/> <path stroke="none" fill="#000000" d="M15.768 13.984L16.1 13.984 16.1 16.14C16.094 16.949 16.48 17.257 17.118 17.257 17.763 17.257 18.147 16.949 18.143 16.14L18.143 13.984 18.475 13.984 18.475 16.213C18.475 16.929 18.089 17.539 17.118 17.539 16.153 17.539 15.768 16.929 15.768 16.213L15.768 13.984z"/> <path stroke="none" fill="#000000" d="M19.167 13.984L19.498 13.984 19.498 17.466 19.167 17.466 19.167 13.984z"/> <path stroke="none" fill="#000000" d="M20.221 13.984L20.591 13.984 22.62 16.929 22.629 16.929 22.629 13.984 22.961 13.984 22.961 17.466 22.591 17.466 20.562 14.521 20.553 14.521 20.553 17.466 20.221 17.466 20.221 13.984z"/> <path stroke="none" fill="#000000" d="M23.658 13.984L26.064 13.984 26.064 14.266 23.99 14.266 23.99 15.525 25.931 15.525 25.931 15.807 23.99 15.807 23.99 17.182 26.088 17.182 26.088 17.466 23.658 17.466 23.658 13.984z"/> <path stroke="none" fill="#000000" d="M27.908 13.984L29.452 13.984C30.077 13.984 30.487 14.349 30.487 14.978 30.487 15.608 30.077 15.974 29.452 15.974L28.239 15.974 28.239 15.691 29.379 15.691C29.838 15.691 30.155 15.457 30.155 14.978 30.155 14.5 29.838 14.266 29.379 14.266L28.239 14.266 28.239 15.691 28.239 15.974 28.239 17.466 27.908 17.466 27.908 13.984z"/> <path stroke="none" fill="#000000" d="M31.643 13.984L32.014 13.984 33.38 17.466 33.024 17.466 32.598 16.384 31.013 16.384 31.117 16.1 32.487 16.1 31.814 14.314 31.117 16.1 31.013 16.384 30.594 17.466 30.239 17.466 31.643 13.984z"/> <path stroke="none" fill="#000000" d="M33.695 13.984L35.292 13.984C35.866 13.984 36.35 14.262 36.35 14.891 36.35 15.33 36.121 15.691 35.671 15.778L35.671 15.788C36.125 15.846 36.256 16.16 36.28 16.574 36.296 16.812 36.296 17.291 36.442 17.466L36.076 17.466C35.993 17.329 35.993 17.071 35.984 16.925 35.954 16.437 35.915 15.896 35.286 15.919L34.029 15.919 34.029 15.637 35.267 15.637C35.671 15.637 36.018 15.384 36.018 14.96 36.018 14.535 35.765 14.266 35.267 14.266L34.029 14.266 34.029 15.637 34.029 15.919 34.029 17.466 33.695 17.466 33.695 13.984z"/> <path stroke="none" fill="#000000" d="M36.603 13.984L39.363 13.984 39.363 14.266 38.149 14.266 38.149 17.466 37.817 17.466 37.817 14.266 36.603 14.266 36.603 13.984z"/> <path stroke="none" fill="#000000" d="M39.847 16.32C39.832 17.038 40.348 17.257 40.982 17.257 41.348 17.257 41.905 17.056 41.905 16.548 41.905 16.155 41.509 15.997 41.188 15.919L40.411 15.73C40.003 15.628 39.627 15.432 39.627 14.891 39.627 14.55 39.847 13.91 40.826 13.91 41.515 13.91 42.118 14.281 42.115 14.993L41.783 14.993C41.762 14.461 41.325 14.194 40.832 14.194 40.378 14.194 39.959 14.368 39.959 14.885 39.959 15.212 40.203 15.349 40.485 15.417L41.335 15.628C41.826 15.759 42.237 15.974 42.237 16.545 42.237 16.783 42.139 17.539 40.905 17.539 40.081 17.539 39.475 17.169 39.515 16.32L39.847 16.32z"/> </g> </g> </g> </svg> My Sample XSLT File <?xml version="1.0" encoding="ISO-8859-1"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:svg="http://www.w3.org/2000/svg"> <xsl:template match="/"> <fo:root xmlns:fo="http://www.w3.org/1999/XSL/Format"> <fo:layout-master-set> <fo:simple-page-master master-name="simple" page-height="11in" page-width="8.5in"> <fo:region-body margin="0.7in" margin-top="1.15in" margin-left=".8in"/> <fo:region-before extent="1.5in"/> <fo:region-after extent="1.5in"/> <fo:region-start extent="1.5in"/> <fo:region-end extent="1.5in"/> </fo:simple-page-master> </fo:layout-master-set> <fo:page-sequence master-reference="simple"> <fo:flow flow-name="xsl-region-body"> <fo:block> <fo:instream-foreign-object xmlns:svg="http://www.w3.org/2000/svg"> <svg:svg height="100%" width="100%" viewBox="0 0 214.819 278.002"> <xsl:for-each select="svg/g/path"> <svg:g style="stroke:none;fill:#000000;stroke:black;"> <svg:path> <xsl:variable name="s"> <xsl:value-of select="translate(@d,' ','')"/> </xsl:variable> <xsl:attribute name="d"><xsl:value-of select="translate($s,',',' ')"/></xsl:attribute> </svg:path> </svg:g> </xsl:for-each> <xsl:for-each select="svg/g/text()"> <xsl:value-of select="."/> </xsl:for-each> <xsl:for-each select="svg/g/g/path"> <svg:g style="stroke:none;fill:#000000;stroke:black;"> <svg:path> <xsl:variable name="s"> <xsl:value-of select="translate(@d,' ','')"/> </xsl:variable> <xsl:attribute name="d"><xsl:value-of select="translate($s,',',' ')"/></xsl:attribute> </svg:path> </svg:g> </xsl:for-each> <xsl:for-each select="svg/g/g/g/path"> <svg:g style="stroke:none;fill:#000000;"> <svg:path> <xsl:variable name="s1"> <xsl:value-of select="translate(@d,' ','')"/> </xsl:variable> <xsl:attribute name="d"><xsl:value-of select="translate($s1,',',' ')"/></xsl:attribute> </svg:path> </svg:g> </xsl:for-each> <xsl:for-each select="svg/g/line"> <svg:g style="stroke-linecap:butt;"> <xsl:variable name="x1"> <xsl:value-of select="@x1"/> </xsl:variable> <xsl:variable name="y1"> <xsl:value-of select="@y1"/> </xsl:variable> <xsl:variable name="x2"> <xsl:value-of select="@x2"/> </xsl:variable> <xsl:variable name="y2"> <xsl:value-of select="@y2"/> </xsl:variable> <xsl:variable name="stroke-width"> <xsl:value-of select="@stroke-width"/> </xsl:variable> <svg:line x1="$x1" y1="$y1" x2="$x2" y2="$y2" stroke-width="$stroke-width" stroke="black" /> </svg:g> </xsl:for-each> </svg:svg> </fo:instream-foreign-object> </fo:block> </fo:flow> </fo:page-sequence> </fo:root> </xsl:template> </xsl:stylesheet> My Question I have developed the XSLT file for the XML, and I need to produce a pdf output after processing the xslt file. but I am not able to get the xml data in to my pdf. Please ask me if the information what I have provided is not sufficient, as I am bit new to Stackoverflow...

Read the article

Using jQuery and OData to Insert a Database Record

- by Stephen Walther

In my previous blog entry, I explored two ways of inserting a database record using jQuery. We added a new Movie to the Movie database table by using a generic handler and by using a WCF service. In this blog entry, I want to take a brief look at how you can insert a database record using OData. Introduction to OData The Open Data Protocol (OData) was developed by Microsoft to be an open standard for communicating data across the Internet. Because the protocol is compatible with standards such as REST and JSON, the protocol is particularly well suited for Ajax. OData has undergone several name changes. It was previously referred to as Astoria and ADO.NET Data Services. OData is used by Sharepoint Server 2010, Azure Storage Services, Excel 2010, SQL Server 2008, and project code name “Dallas.” Because OData is being adopted as the public interface of so many important Microsoft technologies, it is a good protocol to learn. You can learn more about OData by visiting the following websites: http://www.odata.org http://msdn.microsoft.com/en-us/data/bb931106.aspx When using the .NET framework, you can easily expose database data through the OData protocol by creating a WCF Data Service. In this blog entry, I will create a WCF Data Service that exposes the Movie database table. Create the Database and Data Model The MoviesDB database is a simple database that contains the following Movies table: You need to create a data model to represent the MoviesDB database. In this blog entry, I use the ADO.NET Entity Framework to create my data model. However, WCF Data Services and OData are not tied to any particular OR/M framework such as the ADO.NET Entity Framework. For details on creating the Entity Framework data model for the MoviesDB database, see the previous blog entry. Create a WCF Data Service You create a new WCF Service by selecting the menu option Project, Add New Item and selecting the WCF Data Service item template (see Figure 1). Name the new WCF Data Service MovieService.svc. Figure 1 – Adding a WCF Data Service Listing 1 contains the default code that you get when you create a new WCF Data Service. There are two things that you need to modify. Listing 1 – New WCF Data Service File using System; using System.Collections.Generic; using System.Data.Services; using System.Data.Services.Common; using System.Linq; using System.ServiceModel.Web; using System.Web; namespace WebApplication1 { public class MovieService : DataService< /* TODO: put your data source class name here */ > { // This method is called only once to initialize service-wide policies. public static void InitializeService(DataServiceConfiguration config) { // TODO: set rules to indicate which entity sets and service operations are visible, updatable, etc. // Examples: // config.SetEntitySetAccessRule("MyEntityset", EntitySetRights.AllRead); // config.SetServiceOperationAccessRule("MyServiceOperation", ServiceOperationRights.All); config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; } } } First, you need to replace the comment /* TODO: put your data source class name here */ with a class that represents the data that you want to expose from the service. In our case, we need to replace the comment with a reference to the MoviesDBEntities class generated by the Entity Framework. Next, you need to configure the security for the WCF Data Service. By default, you cannot query or modify the movie data. We need to update the Entity Set Access Rule to enable us to insert a new database record. The updated MovieService.svc is contained in Listing 2: Listing 2 – MovieService.svc using System.Data.Services; using System.Data.Services.Common; namespace WebApplication1 { public class MovieService : DataService<MoviesDBEntities> { public static void InitializeService(DataServiceConfiguration config) { config.SetEntitySetAccessRule("Movies", EntitySetRights.AllWrite); config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; } } } That’s all we have to do. We can now insert a new Movie into the Movies database table by posting a new Movie to the following URL: /MovieService.svc/Movies The request must be a POST request. The Movie must be represented as JSON. Using jQuery with OData The HTML page in Listing 3 illustrates how you can use jQuery to insert a new Movie into the Movies database table using the OData protocol. Listing 3 – Default.htm <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>jQuery OData Insert</title> <script src="http://ajax.microsoft.com/ajax/jquery/jquery-1.4.2.js" type="text/javascript"></script> <script src="Scripts/json2.js" type="text/javascript"></script> </head> <body> <form> <label>Title:</label> <input id="title" /> <br /> <label>Director:</label> <input id="director" /> </form> <button id="btnAdd">Add Movie</button> <script type="text/javascript"> $("#btnAdd").click(function () { // Convert the form into an object var data = { Title: $("#title").val(), Director: $("#director").val() }; // JSONify the data var data = JSON.stringify(data); // Post it $.ajax({ type: "POST", contentType: "application/json; charset=utf-8", url: "MovieService.svc/Movies", data: data, dataType: "json", success: insertCallback }); }); function insertCallback(result) { // unwrap result var newMovie = result["d"]; // Show primary key alert("Movie added with primary key " + newMovie.Id); } </script> </body> </html> jQuery does not include a JSON serializer. Therefore, we need to include the JSON2 library to serialize the new Movie that we wish to create. The Movie is serialized by calling the JSON.stringify() method: var data = JSON.stringify(data); You can download the JSON2 library from the following website: http://www.json.org/js.html The jQuery ajax() method is called to insert the new Movie. Notice that both the contentType and dataType are set to use JSON. The jQuery ajax() method is used to perform a POST operation against the URL MovieService.svc/Movies. Because the POST payload contains a JSON representation of a new Movie, a new Movie is added to the database table of Movies. When the POST completes successfully, the insertCallback() method is called. The new Movie is passed to this method. The method simply displays the primary key of the new Movie: Summary The OData protocol (and its enabling technology named WCF Data Services) works very nicely with Ajax. By creating a WCF Data Service, you can quickly expose your database data to an Ajax application by taking advantage of open standards such as REST, JSON, and OData. In the next blog entry, I want to take a closer look at how the OData protocol supports different methods of querying data.

Read the article

Programmatically reuse Dynamics CRM 4 icons

- by gperera

The team that wrote the dynamics crm sdk help rocks! I wanted to display the same crm icons on our time tracking application for consistency, so I opened up the sdk help file, searched for 'icon', ignored all the sitemap/isv config entries since I know I want to get these icons programatically, about half way down the search results I see 'organizationui', sure enough that contains the 16x16 (gridicon), 32x32 (outlookshortcuticon) and 66x48 (largeentityicon) icons!To get all the entities, execute a retrieve multiple request. RetrieveMultipleRequest request = new RetrieveMultipleRequest{ Query = new QueryExpression { EntityName = "organizationui", ColumnSet = new ColumnSet(new[] { "objecttypecode", "formxml", "gridicon" }), }}; var response = sdk.Execute(request) as RetrieveMultipleResponse;Now you have all the entities and icons, here's the tricky part, all the custom entities in crm store the icons inside gridicon, outlookshortcuticon and largeentityicon attributes, the built-in entity icons are stored inside the /_imgs/ folder with the format of /_imgs/ico_16_xxxx.gif (gridicon), with xxxx being the entity type code. The entity type code is not stored inside an attribute of organizationui, however you can get it by looking at the formxml attribute objecttypecode xml attribute. response.BusinessEntityCollection.BusinessEntities.ToList() .Cast<organizationui>().ToList() .ForEach(a => { try { // easy way to check if it's a custom entity if (!string.IsNullOrEmpty(a.gridicon)) { byte[] gif = Convert.FromBase64String(a.gridicon); } else { // built-in entity if (!string.IsNullOrEmpty(a.formxml)) { int start = a.formxml.IndexOf("objecttypecode=\"") + 16; int end = a.formxml.IndexOf("\"", start); // found the entity type code string code = a.formxml.Substring(start, end - start); string url = string.Format("/_imgs/ico_16_{0}.gif", code);Enjoy!

Read the article

Run Your Tests With Any NUnit Version

- by Alois Kraus

I always thought that the NUnit test runners and the test assemblies need to reference the same NUnit.Framework version. I wanted to be able to run my test assemblies with the newest GUI runner (currently 2.5.3). Ok so all I need to do is to reference both NUnit versions the newest one and the official for the current project. There is a nice article form Kent Bogart online how to reference the same assembly multiple times with different versions. The magic works by referencing one NUnit assembly with an alias which does prefix all types inside it. Then I could decorate my tests with the TestFixture and Test attribute from both NUnit versions and everything worked fine except that this was ugly. After playing a little bit around to make it simpler I found that I did not need to reference both NUnit.Framework assemblies. The test runners do not require the TestFixture and Test attribute in their specific version. That is really neat since the test runners are instructed by attributes what to do in a declarative way there is really no need to tie the runners to a specific version. At its core NUnit has this little method hidden to find matching TestFixtures and Tests public bool CanBuildFrom(Type type) { if (!(!type.IsAbstract || type.IsSealed)) { return false; } return (((Reflect.HasAttribute(type, "NUnit.Framework.TestFixtureAttribute", true) || Reflect.HasMethodWithAttribute(type, "NUnit.Framework.TestAttribute" , true)) || Reflect.HasMethodWithAttribute(type, "NUnit.Framework.TestCaseAttribute" , true)) || Reflect.HasMethodWithAttribute(type, "NUnit.Framework.TheoryAttribute" , true)); } That is versioning and backwards compatibility at its best. I tell NUnit what to do by decorating my tests classes with NUnit Attributes and the runner executes my intent without the need to bind me to a specific version. The contract between NUnit versions is actually a bit more complex (think of AssertExceptions) but this is also handled nicely by using not the concrete type but simply to check for the catched exception type by string. What can we learn from this? Versioning can be easy if the contract is small and the users of your library use it in a declarative way (Attributes). Everything beyond it will force you to reference several versions of the same assembly with all its consequences. Type equality is lost between versions so none of your casts will work. That means that you cannot simply use IBigInterface in two versions. You will need a wrapper to call the correct versioned one. To get out of this mess you can use one (and only one) version agnostic driver to encapsulate your business logic from the concrete versions. This is of course more work but as NUnit shows it can be easy. Simplicity is therefore not a nice thing to have but also requirement number one if you intend to make things more complex in version two and want to support any version (older and newer). Any interaction model above easy will not be maintainable. There are different approached to versioning. Below are my own personal observations how versioning works within the .NET Framwork and NUnit. Versioning Models 1. Bug Fixing and New Isolated Features When you only need to fix bugs there is no need to break anything. This is especially true when you have a big API surface. Microsoft did this with the .NET Framework 3.0 which did leave the CLR as is but delivered new assemblies for the features WPF, WCF and Windows Workflow Foundations. Their basic model was that the .NET 2.0 assemblies were declared as red assemblies which must not change (well mostly but each change was carefully reviewed to minimize the risk of breaking changes as much as possible) whereas the new green assemblies of .NET 3,3.5 did not have such obligations since they did implement new unrelated features which did not have any impact on the red assemblies. This is versioning strategy aimed at maximum compatibility and the delivery of new unrelated features. If you have a big API surface you should strive hard to do the same or you will break your customers code with every release. 2. New Breaking Features There are times when really new things need to be added to an existing product. The .NET Framework 4.0 did change the CLR in many ways which caused subtle different behavior although the API´s remained largely unchanged. Sometimes it is possible to simply recompile an application to make it work (e.g. changed method signature void Func() –> bool Func()) but behavioral changes need much more thought and cannot be automated. To minimize the impact .NET 2.0,3.0,3.5 applications will not automatically use the .NET 4.0 runtime when installed but they will keep using the “old” one. What is interesting is that a side by side execution model of both CLR versions (2 and 4) within one process is possible. Key to success was total isolation. You will have 2 GCs, 2 JIT compilers, 2 finalizer threads within one process. The two .NET runtimes cannot talk (except via the usual IPC mechanisms) to each other. Both runtimes share nothing and run independently within the same process. This enables Explorer plugins written for the CLR 2.0 to work even when a CLR 4 plugin is already running inside the Explorer process. The price for isolation is an increased memory footprint because everything is loaded and running two times. 3. New Non Breaking Features It really depends where you break things. NUnit has evolved and many different Assert, Expect… methods have been added. These changes are all localized in the NUnit.Framework assembly which can be easily extended. As long as the test execution contract (TestFixture, Test, AssertException) remains stable it is possible to write test executors which can run tests written for NUnit 10 because the execution contract has not changed. It is possible to write software which executes other components in a version independent way but this is only feasible if the interaction model is relatively simple. Versioning software is hard and it looks like it will remain hard since you suddenly work in a severely constrained environment when you try to innovate and to keep everything backwards compatible at the same time. These are contradicting goals and do not play well together. The easiest way out of this is to carefully watch what your customers are doing with your software. Minimizing the impact is much easier when you do not need to guess how many people will be broken when this or that is removed.

Read the article

EM12c Release 4: New EMCLI Verbs

- by SubinDaniVarughese

Here are the new EM CLI verbs in Enterprise Manager 12c Release 4 (12.1.0.4). This helps you in writing new scripts or enhancing your existing scripts for further automation. Basic Administration Verbs invoke_ws - Invoke EM web service.ADM Verbs associate_target_to_adm - Associate a target to an application data model. export_adm - Export Application Data Model to a specified .xml file. import_adm - Import Application Data Model from a specified .xml file. list_adms - List the names, target names and application suites of existing Application Data Models verify_adm - Submit an application data model verify job for the target specified.Agent Update Verbs get_agent_update_status - Show Agent Update Results get_not_updatable_agents - Shows Not Updatable Agents get_updatable_agents - Show Updatable Agents update_agents - Performs Agent Update Prereqs and submits Agent Update JobBI Publisher Reports Verbs grant_bipublisher_roles - Grants access to the BI Publisher catalog and features. revoke_bipublisher_roles - Revokes access to the BI Publisher catalog and features.Blackout Verbs create_rbk - Create a Retro-active blackout.CFW Verbs cancel_cloud_service_requests - To cancel cloud service requests delete_cloud_service_instances - To delete cloud service instances delete_cloud_user_objects - To delete cloud user objects. get_cloud_service_instances - To get information about cloud service instances get_cloud_service_requests - To get information about cloud requests get_cloud_user_objects - To get information about cloud user objects.Chargeback Verbs add_chargeback_entity - Adds the given entity to Chargeback. assign_charge_plan - Assign a plan to a chargeback entity. assign_cost_center - Assign a cost center to a chargeback entity. create_charge_entity_type - Create charge entity type export_charge_plans - Exports charge plans metadata to file export_custom_charge_items - Exports user defined charge items to a file import_charge_plans - Imports charge plans metadata from given file import_custom_charge_items - Imports user defined charge items metadata from given file list_charge_plans - Gives a list of charge plans in Chargeback. list_chargeback_entities - Gives a list of all the entities in Chargeback list_chargeback_entity_types - Gives a list of all the entity types that are supported in Chargeback list_cost_centers - Lists the cost centers in Chargeback. remove_chargeback_entity - Removes the given entity from Chargeback. unassign_charge_plan - Un-assign the plan associated to a chargeback entity. unassign_cost_center - Un-assign the cost center associated to a chargeback entity.Configuration/Association History disable_config_history - Disable configuration history computation for a target type. enable_config_history - Enable configuration history computation for a target type. set_config_history_retention_period - Sets the amount of time for which Configuration History is retained.ConfigurationCompare config_compare - Submits the configuration comparison job get_config_templates - Gets all the comparison templates from the repositoryCompliance Verbs fix_compliance_state - Fix compliance state by removing references in deleted targets.Credential Verbs update_credential_setData Subset Verbs export_subset_definition - Exports specified subset definition as XML file at specified directory path. generate_subset - Generate subset using specified subset definition and target database. import_subset_definition - Import a subset definition from specified XML file. import_subset_dump - Imports dump file into specified target database. list_subset_definitions - Get the list of subset definition, adm and target nameDelete pluggable Database Job Verbs delete_pluggable_database - Delete a pluggable databaseDeployment Procedure Verbs get_runtime_data - Get the runtime data of an executionDiscover and Push to Agents Verbs generate_discovery_input - Generate Discovery Input file for discovering Auto-Discovered Domains refresh_fa - Refresh Fusion Instance run_fa_diagnostics - Run Fusion Applications DiagnosticsFusion Middleware Provisioning Verbs create_fmw_domain_profile - Create a Fusion Middleware Provisioning Profile from a WebLogic Domain create_fmw_home_profile - Create a Fusion Middleware Provisioning Profile from an Oracle Home create_inst_media_profile - Create a Fusion Middleware Provisioning Profile from Installation MediaGold Agent Image Verbs create_gold_agent_image - Creates a gold agent image. decouple_gold_agent_image - Decouples the agent from gold agent image. delete_gold_agent_image - Deletes a gold agent image. get_gold_agent_image_activity_status - Gets gold agent image activity status. get_gold_agent_image_details - Get the gold agent image details. list_agents_on_gold_image - Lists agents on a gold agent image. list_gold_agent_image_activities - Lists gold agent image activities. list_gold_agent_image_series - Lists gold agent image series. list_gold_agent_images - Lists the available gold agent images. promote_gold_agent_image - Promotes a gold agent image. stage_gold_agent_image - Stages a gold agent image.Incident Rules Verbs add_target_to_rule_set - Add a target to an enterprise rule set. delete_incident_record - Delete one or more open incidents remove_target_from_rule_set - Remove a target from an enterprise rule set. Job Verbs export_jobs - Export job details in to an xml file import_jobs - Import job definitions from an xml file job_input_file - Supply details for a job verb in a property file resume_job - Resume a job or set of jobs suspend_job - Suspend a job or set of jobs Oracle Database as Service Verbs config_db_service_target - Configure DB Service target for OPCPrivilege Delegation Settings Verbs clear_default_privilege_delegation_setting - Clears the default privilege delegation setting for a given list of platforms set_default_privilege_delegation_setting - Sets the default privilege delegation setting for a given list of platforms test_privilege_delegation_setting - Tests a Privilege Delegation Setting on a hostSSA Verbs cleanup_dbaas_requests - Submit cleanup request for failed request create_dbaas_quota - Create Database Quota for a SSA User Role create_service_template - Create a Service Template delete_dbaas_quota - Delete the Database Quota setup for a SSA User Role delete_service_template - Delete a given service template get_dbaas_quota - List the Database Quota setup for all SSA User Roles get_dbaas_request_settings - List the Database Request Settings get_service_template_detail - Get details of a given service template get_service_templates - Get the list of available service templates rename_service_template - Rename a given service template update_dbaas_quota - Update the Database Quota for a SSA User Role update_dbaas_request_settings - Update the Database Request Settings update_service_template - Update a given service template. SavedConfigurations get_saved_configs - Gets the saved configurations from the repository Server Generated Alert Metric Verbs validate_server_generated_alerts - Server Generated Alert Metric VerbServices Verbs edit_sl_rule - Edit the service level rule for the specified serviceSiebel Verbs list_siebel_enterprises - List Siebel enterprises currently monitored in EM list_siebel_servers - List Siebel servers under a specified siebel enterprise update_siebel- Update a Siebel enterprise or its underlying serversSiteGuard Verbs add_siteguard_aux_hosts - Associate new auxiliary hosts to the system configure_siteguard_lag - Configure apply lag and transport lag limit for databases delete_siteguard_aux_host - Delete auxiliary host associated with a site delete_siteguard_lag - Erases apply lag or transport lag limit for databases get_siteguard_aux_hosts - Get all auxiliary hosts associated with a site get_siteguard_health_checks - Shows schedule of health checks get_siteguard_lag - Shows apply lag or transport lag limit for databases schedule_siteguard_health_checks - Schedule health checks for an operation plan stop_siteguard_health_checks - Stops all future health check execution of an operation plan update_siteguard_lag - Updates apply lag and transport lag limit for databasesSoftware Library Verbs stage_swlib_entity_files - Stage files of an entity from Software Library to a host target.Target Data Verbs create_assoc - Creates target associations delete_assoc - Deletes target associations list_allowed_pairs - Lists allowed association types for specified source and destination list_assoc - Lists associations between source and destination targets manage_agent_partnership - Manages partnership between agents. Used for explicitly assigning agent partnershipsTrace Reports generate_ui_trace_report - Generate and download UI Page performance report (to identify slow rendering pages)VI EMCLI Verbs add_virtual_platform - Add Oracle Virtual PLatform(s). modify_virtual_platform - Modify Oracle Virtual Platform.To get more details about each verb, execute$ emcli help <verb_name>Example: $ emcli help list_assocNew resources in list verbThese are the new resources in EM CLI list verb :Certificates WLSCertificateDetails Credential Resource Group PreferredCredentialsDefaultSystemScope - Preferred credentials (System Scope) PreferredCredentialsSystemScope - Target preferred credentialPrivilege Delegation Settings TargetPrivilegeDelegationSettingDetails - List privilege delegation setting details on a host TargetPrivilegeDelegationSetting - List privilege delegation settings on a host PrivilegeDelegationSettings - Lists all Privilege Delegation Settings PrivilegeDelegationSettingDetails - Lists details of Privilege Delegation Settings To get more details about each resource, execute$ emcli list -resource="<resource_name>" -helpExample: $ emcli list -resource="PrivilegeDelegationSettings" -helpDeprecated Verbs:Agent Administration Verbs resecure_agent - Resecure an agentTo get the complete list of verbs, execute:$ emcli help Stay Connected: Twitter | Facebook | YouTube | Linkedin | Newsletter Download the Oracle Enterprise Manager 12c Mobile app

Read the article

CodePlex Daily Summary for Monday, May 03, 2010

CodePlex Daily Summary for Monday, May 03, 2010New Projects.radiko: エアログラス採用のシンプルなradiko(http://radiko.jp/)クライアントです。タスクトレイのアイコンからラジオ局の切り替えができます。7Scale: EmptyB2C MVC Plattform: The B2C MVC Plattform aims to be pluggable site framework to help small busisness accomplish basic tasks between business and customers.ElValWeb: The goal of the project to create full featured implementation of ModelValidatorProvider for Enterprise Library Application Validation Block, wich ...esatis yazilimi: asp.net yazılımı ile satış magazasi websitesi kur.IEnumerable.It sample code: IEnumerable.It sample codejQuery MicroAjax for ASP.NET: MicroAjax is a set of jQuery plugins and .NET components designed to provide simple, powerful and efficient Ajax centric web application design pat...Karbon VOS: Karbon VOS is an advanced Virtual Operating System Template for Visual Basic Express. It's developed in Visual Basic. Karbon VOS hopes to one day b...LINQ Mapper: LINQ Mapper translates simple LINQ queries between different sources. It allows you to write queries against your domain model, but have them run ...Meccano Silverlight Framework: Meccano is a new generation of frameworks for creation of LOB Silverlight applications based on MEF, RX, WCF, ADO.NET Data Services etc. It is inte...Multiuse Model View (MMV) Library: This project is an open source library for the Multiuse Model View (MMV) pattern for building robust WPF and ASP.Net applications. Visit my blog ht...Process Affinity Control: Process Affinity Control allows to set the affinity masks of processes based on rules.SilverSpatial: This project helps bridge the gap between Silverlight and Geo-Spatial data type (such as SQL Spatial). It implements the Well-Known-Binary (WKB) fo...StageAssets: Application for storing data about "things" and people in theatre. For example equipment, actors and so on.Stratosphere: Mono compatible library with set of primitives to work with scalable table, queue and block containers with corresponding implementations for Amazo...TRX Web-Viewer: A simple web-based application to upload and view VSTS 2008 and VSTS 2010 test result files with some basic lookup and feature-wise management of r...WDT2: WDT 2 is the school project to begin learning .NET enviroment, The main focus is on learning the use of almost all the componenets.WPF Behavior Library: WPF Behavior Library is a set of additional actions for WPF that allow you to add extra behaviors to a control quickly and easily. Currently the on...YouTubeEmbeddedVideo WebControl for ASP.NET: A Control to embed YouTube videos in ASP.NET pages. Works in C# and VB.NETNew Releases.radiko: beta: 東京局のみ対応あとは手抜きActiveWorlds Managed .NET SDK: AwManaged Technology Preview - WIN32 (Alpha): This WIN32 release contains the Server Console Application. The Setup executable should be run as administrator on O.S. using UAC (Vista/Win7)AJAX Control Framework: v1.0.1.0: v1.0.1.0 - Contains a Bing Maps sample project, a number of bug fixes and a few performance improvements. - AJAX enable ANY custom control that der...App_Code (and Usercontrol) Editor (ACE): v1.0.0 alpha: The first alpha release of the AppCode Editor for Umbraco 4.0.3 is now available to download! Tested to work with usercontrols - pre-compilation wi...ElValWeb: ElValWeb 0.0.1.0: Version 0.0.1.0 contains client validation support forAndCompositeValidator ContainsCharactersValidator DomainValidator NotNullValidator Or...esatis yazilimi: magaza: magazanın yazılımları ve veri tabanının yazılımlarıGrunty OS: Grunty OS USB: Download Grunty OS for USBGrunty OS: Grunty OS.ISO: Grunty OS ISOKarbon VOS: Milestone 1 (Kaptua): Milestone 1...Live Meeting API Wrapper: LiveMeetingAPIWrapperV1.2: Added get meeting and update meeting.Multiuse Model View (MMV) Library: v0.3: first alpha release. Medium amount of functionality and some use cases tested.MVC Foolproof Validation: Beta 0.9.3774: Adds resource provided error messages, regular expression operators and a new RegularExpressionIf attribute.Process Affinity Control: Version 1.0.0: This is the first release. Planned features for the next release: No administrative privileges needed to run the manager Select the active scena...SharePoint 2010 Service Manager: SharePoint 2010 Service Manager 1.1: Added support to run under UAC with automatic security elevationSharePoint Event Handler Manager: Event Handler Manager 2.0: Please download the application here: http://www.ackermantech.com/registerevents.aspxSkyDrive Synchronizer: SkyDrive Sync Beta 0.1: Beta release includes: Upload and download Synchronize updated files Delete files on web/locally if not in source Split larger files into sma...Stratosphere: Stratosphere 1.0.0.0: Initial beta releaseSuggested Resources for .NET Developers: 0.8.0.0 VS2010 - focus on displaying content: This is the first release of Suggested Resources that can be downloaded from the internet. While there is still a lot of work to be done this rele...TRX Web-Viewer: TRX Web-Viewer V1.0: First working versionVCC: Latest build, v2.1.30502.0: Automatic drop of latest buildWatchersNET.TagCloud: WatchersNET.TagCloud 01.04.00: !Whats New New Tag Mode: Search Referrers (Shows Search Tags From Google, Ask, Bing, Yahoo and the Dnn Site Search) Taxonomy Tags now contains L...Web/Cloud Applications Development Framework | Visual WebGui: 6.4 Beta 2e: Fully featured beta version of Visual WebGui Web/Cloud Applicaiton Development FrameworkWPF Behavior Library: WPF Behavior Library 0.1 Release: First alpha release of the WPF Behavior Library. It should be stable but doesn't have all of the features it will have in the future and the API ma...xvanneste: Sharepoint Social Network Client: Client permettant d'avoir accés au social network de sharepoint a l'exterieur du navigateur.Most Popular ProjectsRawrWBFS ManagerAJAX Control Toolkitpatterns & practices – Enterprise LibraryMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)iTuner - The iTunes CompanionASP.NETDotNetNuke® Community EditionMost Active ProjectsIonics Isapi Rewrite Filterpatterns & practices – Enterprise LibraryRawrHydroServer - CUAHSI Hydrologic Information System ServerAJAX Control Frameworkpatterns & practices: Azure Security GuidanceTinyProjectBlogEngine.NETNB_Store - Free DotNetNuke Ecommerce Catalog ModuleDambach Linear Algebra Framework

Read the article

How to create a simple adf dashboard application with EJB 3.0

- by Rodrigues, Raphael

In this month's Oracle Magazine, Frank Nimphius wrote a very good article about an Oracle ADF Faces dashboard application to support persistent user personalization. You can read this entire article clicking here. The idea in this article is to extend the dashboard application. My idea here is to create a similar dashboard application, but instead ADF BC model layer, I'm intending to use EJB3.0. There are just a one small trick here and I'll show you. I'm using the HR usual oracle schema. The steps are: 1. Create a ADF Fusion Application with EJB as a layer model 2. Generate the entities from table (I'm using Department and Employees only) 3. Create a new Session Bean. I called it: HRSessionEJB 4. Create a new method like that: public List getAllDepartmentsHavingEmployees(){ JpaEntityManager jpaEntityManager = (JpaEntityManager)em.getDelegate(); Query query = jpaEntityManager.createNamedQuery("Departments.allDepartmentsHavingEmployees"); JavaBeanResult.setQueryResultClass(query, AggregatedDepartment.class); return query.getResultList(); } 5. In the Departments entity, create a new native query annotation: @Entity @NamedQueries( { @NamedQuery(name = "Departments.findAll", query = "select o from Departments o") }) @NamedNativeQueries({ @NamedNativeQuery(name="Departments.allDepartmentsHavingEmployees", query = "select e.department_id, d.department_name , sum(e.salary), avg(e.salary) , max(e.salary), min(e.salary) from departments d , employees e where d.department_id = e.department_id group by e.department_id, d.department_name")}) public class Departments implements Serializable {...} 6. Create a new POJO called AggregatedDepartment: package oramag.sample.dashboard.model; import java.io.Serializable; import java.math.BigDecimal; public class AggregatedDepartment implements Serializable{ @SuppressWarnings("compatibility:5167698678781240729") private static final long serialVersionUID = 1L; private BigDecimal departmentId; private String departmentName; private BigDecimal sum; private BigDecimal avg; private BigDecimal max; private BigDecimal min; public AggregatedDepartment() { super(); } public AggregatedDepartment(BigDecimal departmentId, String departmentName, BigDecimal sum, BigDecimal avg, BigDecimal max, BigDecimal min) { super(); this.departmentId = departmentId; this.departmentName = departmentName; this.sum = sum; this.avg = avg; this.max = max; this.min = min; } public void setDepartmentId(BigDecimal departmentId) { this.departmentId = departmentId; } public BigDecimal getDepartmentId() { return departmentId; } public void setDepartmentName(String departmentName) { this.departmentName = departmentName; } public String getDepartmentName() { return departmentName; } public void setSum(BigDecimal sum) { this.sum = sum; } public BigDecimal getSum() { return sum; } public void setAvg(BigDecimal avg) { this.avg = avg; } public BigDecimal getAvg() { return avg; } public void setMax(BigDecimal max) { this.max = max; } public BigDecimal getMax() { return max; } public void setMin(BigDecimal min) { this.min = min; } public BigDecimal getMin() { return min; } } 7. Create the util java class called JavaBeanResult. The function of this class is to configure a native SQL query to return POJOs in a single line of code using the utility class. Credits: http://onpersistence.blogspot.com.br/2010/07/eclipselink-jpa-native-constructor.html package oramag.sample.dashboard.model.util; /******************************************************************************* * Copyright (c) 2010 Oracle. All rights reserved. * This program and the accompanying materials are made available under the * terms of the Eclipse Public License v1.0 and Eclipse Distribution License v. 1.0 * which accompanies this distribution. * The Eclipse Public License is available at http://www.eclipse.org/legal/epl-v10.html * and the Eclipse Distribution License is available at * http://www.eclipse.org/org/documents/edl-v10.php. * * @author shsmith ******************************************************************************/ import java.lang.reflect.Constructor; import java.lang.reflect.InvocationTargetException; import java.util.ArrayList; import java.util.List; import javax.persistence.Query; import org.eclipse.persistence.exceptions.ConversionException; import org.eclipse.persistence.internal.helper.ConversionManager; import org.eclipse.persistence.internal.sessions.AbstractRecord; import org.eclipse.persistence.internal.sessions.AbstractSession; import org.eclipse.persistence.jpa.JpaHelper; import org.eclipse.persistence.queries.DatabaseQuery; import org.eclipse.persistence.queries.QueryRedirector; import org.eclipse.persistence.sessions.Record; import org.eclipse.persistence.sessions.Session; /*** * This class is a simple query redirector that intercepts the result of a * native query and builds an instance of the specified JavaBean class from each * result row. The order of the selected columns musts match the JavaBean class * constructor arguments order. * * To configure a JavaBeanResult on a native SQL query use: * JavaBeanResult.setQueryResultClass(query, SomeBeanClass.class); * where query is either a JPA SQL Query or native EclipseLink DatabaseQuery. * * @author shsmith * */ public final class JavaBeanResult implements QueryRedirector { private static final long serialVersionUID = 3025874987115503731L; protected Class resultClass; public static void setQueryResultClass(Query query, Class resultClass) { JavaBeanResult javaBeanResult = new JavaBeanResult(resultClass); DatabaseQuery databaseQuery = JpaHelper.getDatabaseQuery(query); databaseQuery.setRedirector(javaBeanResult); } public static void setQueryResultClass(DatabaseQuery query, Class resultClass) { JavaBeanResult javaBeanResult = new JavaBeanResult(resultClass); query.setRedirector(javaBeanResult); } protected JavaBeanResult(Class resultClass) { this.resultClass = resultClass; } @SuppressWarnings("unchecked") public Object invokeQuery(DatabaseQuery query, Record arguments, Session session) { List results = new ArrayList(); try { Constructor[] constructors = resultClass.getDeclaredConstructors(); Constructor javaBeanClassConstructor = null; // (Constructor) resultClass.getDeclaredConstructors()[0]; Class[] constructorParameterTypes = null; // javaBeanClassConstructor.getParameterTypes(); List rows = (List) query.execute( (AbstractSession) session, (AbstractRecord) arguments); for (Object[] columns : rows) { boolean found = false; for (Constructor constructor : constructors) { javaBeanClassConstructor = constructor; constructorParameterTypes = javaBeanClassConstructor.getParameterTypes(); if (columns.length == constructorParameterTypes.length) { found = true; break; } // if (columns.length != constructorParameterTypes.length) { // throw new ColumnParameterNumberMismatchException( // resultClass); // } } if (!found) throw new ColumnParameterNumberMismatchException( resultClass); Object[] constructorArgs = new Object[constructorParameterTypes.length]; for (int j = 0; j < columns.length; j++) { Object columnValue = columns[j]; Class parameterType = constructorParameterTypes[j]; // convert the column value to the correct type--if possible constructorArgs[j] = ConversionManager.getDefaultManager() .convertObject(columnValue, parameterType); } results.add(javaBeanClassConstructor.newInstance(constructorArgs)); } } catch (ConversionException e) { throw new ColumnParameterMismatchException(e); } catch (IllegalArgumentException e) { throw new ColumnParameterMismatchException(e); } catch (InstantiationException e) { throw new ColumnParameterMismatchException(e); } catch (IllegalAccessException e) { throw new ColumnParameterMismatchException(e); } catch (InvocationTargetException e) { throw new ColumnParameterMismatchException(e); } return results; } public final class ColumnParameterMismatchException extends RuntimeException { private static final long serialVersionUID = 4752000720859502868L; public ColumnParameterMismatchException(Throwable t) { super( "Exception while processing query results-ensure column order matches constructor parameter order", t); } } public final class ColumnParameterNumberMismatchException extends RuntimeException { private static final long serialVersionUID = 1776794744797667755L; public ColumnParameterNumberMismatchException(Class clazz) { super( "Number of selected columns does not match number of constructor arguments for: " + clazz.getName()); } } } 8. Create the DataControl and a jsf or jspx page 9. Drag allDepartmentsHavingEmployees from DataControl and drop in your page 10. Choose Graph > Type: Bar (Normal) > any layout 11. In the wizard screen, Bars label, adds: sum, avg, max, min. In the X Axis label, adds: departmentName, and click in OK button 12. Run the page, the result is showed below: You can download the workspace here . It was using the latest jdeveloper version 11.1.2.2.

Read the article

Allowing Access to HttpContext in WCF REST Services

- by Rick Strahl

If you’re building WCF REST Services you may find that WCF’s OperationContext, which provides some amount of access to Http headers on inbound and outbound messages, is pretty limited in that it doesn’t provide access to everything and sometimes in a not so convenient manner. For example accessing query string parameters explicitly is pretty painful: [OperationContract] [WebGet] public string HelloWorld() { var properties = OperationContext.Current.IncomingMessageProperties; var property = properties[HttpRequestMessageProperty.Name] as HttpRequestMessageProperty; string queryString = property.QueryString; var name = StringUtils.GetUrlEncodedKey(queryString,"Name"); return "Hello World " + name; } And that doesn’t account for the logic in GetUrlEncodedKey to retrieve the querystring value. It’s a heck of a lot easier to just do this: [OperationContract] [WebGet] public string HelloWorld() { var name = HttpContext.Current.Request.QueryString["Name"] ?? string.Empty; return "Hello World " + name; } Ok, so if you follow the REST guidelines for WCF REST you shouldn’t have to rely on reading query string parameters manually but instead rely on routing logic, but you know what: WCF REST is a PITA anyway and anything to make things a little easier is welcome. To enable the second scenario there are a couple of steps that you have to take on your service implementation and the configuration file. Add aspNetCompatibiltyEnabled in web.config Fist you need to configure the hosting environment to support ASP.NET when running WCF Service requests. This ensures that the ASP.NET pipeline is fired up and configured for every incoming request. <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" /> </system.serviceModel> Markup your Service Implementation with AspNetCompatibilityRequirements Attribute Next you have to mark up the Service Implementation – not the contract if you’re using a separate interface!!! – with the AspNetCompatibilityRequirements attribute: [ServiceContract(Namespace = "RateTestService")] [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] public class RestRateTestProxyService Typically you’ll want to use Allowed as the preferred option. The other options are NotAllowed and Required. Allowed will let the service run if the web.config attribute is not set. Required has to have it set. All these settings determine whether an ASP.NET host AppDomain is used for requests. Once Allowed or Required has been set on the implemented class you can make use of the ASP.NET HttpContext object. When I allow for ASP.NET compatibility in my WCF services I typically add a property that exposes the Context and Request objects a little more conveniently: public HttpContext Context { get { return HttpContext.Current; } } public HttpRequest Request { get { return HttpContext.Current.Request; } } While you can also access the Response object and write raw data to it and manipulate headers THAT is probably not such a good idea as both your code and WCF will end up writing into the output stream. However it might be useful in some situations where you need to take over output generation completely and return something completely custom. Remember though that WCF REST DOES actually support that as well with Stream responses that essentially allow you to return any kind of data to the client so using Response should really never be necessary. Should you or shouldn’t you? WCF purists will tell you never to muck with the platform specific features or the underlying protocol, and if you can avoid it you definitely should avoid it. Querystring management in particular can be handled largely with Url Routing, but there are exceptions of course. Try to use what WCF natively provides – if possible as it makes the code more portable. For example, if you do enable ASP.NET Compatibility you won’t be able to self host a WCF REST service. At the same time realize that especially in WCF REST there are number of big holes or access to some features are a royal pain and so it’s not unreasonable to access the HttpContext directly especially if it’s only for read-only access. Since everything in REST works of URLS and the HTTP protocol more control and easier access to HTTP features is a key requirement to building flexible services. It looks like vNext of the WCF REST stuff will feature many improvements along these lines with much deeper native HTTP support that is often so useful in REST applications along with much more extensibility that allows for customization of the inputs and outputs as data goes through the request pipeline. I’m looking forward to this stuff as WCF REST as it exists today still is a royal pain (in fact I’m struggling with a mysterious version conflict/crashing error on my machine that I have not been able to resolve – grrrr…).© Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET AJAX WCF

Read the article

Paging over a lazy-loaded collection with NHibernate

- by HackedByChinese

I read this article where Ayende states NHibernate can (compared to EF 4): Collection with lazy=”extra” – Lazy extra means that NHibernate adapts to the operations that you might run on top of your collections. That means that blog.Posts.Count will not force a load of the entire collection, but rather would create a “select count(*) from Posts where BlogId = 1” statement, and that blog.Posts.Contains() will likewise result in a single query rather than paying the price of loading the entire collection to memory. Collection filters and paged collections - this allows you to define additional filters (including paging!) on top of your entities collections, which means that you can easily page through the blog.Posts collection, and not have to load the entire thing into memory. So I decided to put together a test case. I created the cliché Blog model as a simple demonstration, with two classes as follows: public class Blog { public virtual int Id { get; private set; } public virtual string Name { get; set; } public virtual ICollection<Post> Posts { get; private set; } public virtual void AddPost(Post item) { if (Posts == null) Posts = new List<Post>(); if (!Posts.Contains(item)) Posts.Add(item); } } public class Post { public virtual int Id { get; private set; } public virtual string Title { get; set; } public virtual string Body { get; set; } public virtual Blog Blog { get; private set; } } My mappings files look like this: <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2" default-access="property" auto-import="true" default-cascade="none" default-lazy="true"> <class xmlns="urn:nhibernate-mapping-2.2" name="Model.Blog, TestEntityFramework, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null" table="Blogs"> <id name="Id" type="System.Int32, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <column name="Id" /> <generator class="identity" /> </id> <property name="Name" type="System.String, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <column name="Name" /> </property> <property name="Type" type="System.Int32, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <column name="Type" /> </property> <bag lazy="extra" name="Posts"> <key> <column name="Blog_Id" /> </key> <one-to-many class="Model.Post, TestEntityFramework, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null" /> </bag> </class> </hibernate-mapping> <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2" default-access="property" auto-import="true" default-cascade="none" default-lazy="true"> <class xmlns="urn:nhibernate-mapping-2.2" name="Model.Post, TestEntityFramework, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null" table="Posts"> <id name="Id" type="System.Int32, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <column name="Id" /> <generator class="identity" /> </id> <property name="Title" type="System.String, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <column name="Title" /> </property> <property name="Body" type="System.String, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <column name="Body" /> </property> <many-to-one class="Model.Blog, TestEntityFramework, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null" name="Blog"> <column name="Blog_id" /> </many-to-one> </class> </hibernate-mapping> My test case looks something like this: using (ISession session = Configuration.Current.CreateSession()) // this class returns a custom ISession that represents either EF4 or NHibernate { blogs = (from b in session.Linq<Blog>() where b.Name.Contains("Test") orderby b.Id select b); Console.WriteLine("# of Blogs containing 'Test': {0}", blogs.Count()); Console.WriteLine("Viewing the first 5 matching Blogs."); foreach (Blog b in blogs.Skip(0).Take(5)) { Console.WriteLine("Blog #{0} \"{1}\" has {2} Posts.", b.Id, b.Name, b.Posts.Count); Console.WriteLine("Viewing first 5 matching Posts."); foreach (Post p in b.Posts.Skip(0).Take(5)) { Console.WriteLine("Post #{0} \"{1}\" \"{2}\"", p.Id, p.Title, p.Body); } } } Using lazy="extra", the call to b.Posts.Count does do a SELECT COUNT(Id)... which is great. However, b.Posts.Skip(0).Take(5) just grabs all Posts for Blog.Id = ?id, and then LINQ on the application side is just taking the first 5 from the resulting collection. What gives?

Read the article

WebCenter Content shared folders for clustering

- by Kyle Hatlestad

When configuring a WebCenter Content (WCC) cluster, one of the things which makes it unique from some other WebLogic Server applications is its requirement for a shared file system. This is actually not any different then 10g and previous versions of UCM when it ran directly on a JVM. And while it is simple enough to say it needs a shared file system, there are some crucial details in how those directories are configured. And if they aren't followed, you may result in some unwanted behavior. This blog post will go into the details on how exactly the file systems should be split and what options are required. Beyond documents being stored on the file system and/or database and metadata being stored in the database along with other structured data, there is other information being read and written to on the file system. Information such as user profile preferences, workflow item state information, metadata profiles, and other details are stored in files. In addition, for certain processes within WCC, each of the nodes needs to know what the other nodes are doing so they don’t step on each other. WCC keeps track of this through the use of lock files on the file system. Because of this, each node of the WCC must have access to the same file system just as they have access to the same database. WCC uses its own locking mechanism using files, so it also needs to have access to those files without file attribute caching and without locking being done by the client (node). If one of the nodes accesses a certain status file and it happens to be cached, that node might attempt to run a process which another node is already working on. Or if a particular file is locked by one of the node clients, this could interfere with access by another node. Unfortunately, when disabling file attribute caching on the file share, this can impact performance. So it is important to only disable caching and locking on the particular folders which require it. When configuring WebCenter Content after deploying the domain, it asks for 3 different directories: Content Server Instance Folder, Native File Repository Location, and Weblayout Folder. And starting in PS5, it now asks for the User Profile Folder. Even if you plan on storing the content in the database, you still need to establish a Native File (Vault) and Weblayout directories. These will be used for handling temporary files, cached files, and files used to deliver the UI. For these directories, the only folder which needs to have the file attribute caching and locking disabled is the ‘Content Server Instance Folder’. So when establishing this share through NFS or a clustered file system, be sure to specify those options. For instance, if creating the share through NFS, use the ‘noac’ and ‘nolock’ options for the mount options. For the other directories, caching and locking should be enabled to provide best performance to those locations. These directory path configurations are contained within the <domain dir>\ucm\cs\bin\intradoc.cfg file: #Server System PropertiesIDC_Id=UCM_server1 #Server Directory Variables IdcHomeDir=/u01/fmw/Oracle_ECM1/ucm/idc/ FmwDomainConfigDir=/u01/fmw/user_projects/domains/base_domain/config/fmwconfig/ AppServerJavaHome=/u01/jdk/jdk1.6.0_22/jre/ AppServerJavaUse64Bit=true IntradocDir=/mnt/share_no_cache/base_domain/ucm/cs/ VaultDir=/mnt/share_with_cache/ucm/cs/vault/ WeblayoutDir=/mnt/share_with_cache/ucm/cs/weblayout/ #Server Classpath variables #Additional Variables #NOTE: UserProfilesDir is only available in PS5 – 11.1.1.6.0UserProfilesDir=/mnt/share_with_cache/ucm/cs/data/users/profiles/ In addition to these folder configurations, it’s also recommended to move node-specific folders to local disk to avoid unnecessary traffic to the shared directory. So on each node, go to <domain dir>\ucm\cs\bin\intradoc.cfg and add these additional configuration entries: VaultTempDir=<domain dir>/ucm/<cs>/vault/~temp/ TraceDirectory=<domain dir>/servers/<UCM_serverN>/logs/EventDirectory=<domain dir>/servers/<UCM_serverN>/logs/event/ And of course, don’t forget the cluster-specific configuration values to add as well. These can be added through Admin Server -> General Configuration -> Additional Configuration Variables or directly in the <IntradocDir>/config/config.cfg file: ArchiverDoLocks=true DisableSharedCacheChecking=true ServiceAllowRetry=true (use only with Oracle RAC Database)PublishLockTimeout=300000 (time can vary depending on publishing time and number of nodes) For additional information and details on clustering configuration, I highly recommend reviewing document [1209496.1] on the support site. In addition, there is a great step-by-step guide on setting up a WebCenter Content cluster [1359930.1].

Read the article

Simple iOS glDrawElements - BAD_ACCESS

- by user699215

You can copy paste this into the default OpenGl template created in Xcode. Why am I not seeing anything :-) It is strange as the glDrawArrays(GL_TRIANGLES, 0, 3); is working fine, but with glDrawElements(GL_TRIANGLE_STRIP, sizeof(indices)/sizeof(GLubyte), GL_UNSIGNED_BYTE, indices); Is giving BAD_ACCESS? Copy paste this into Xcode default OpenGl template: ViewController #import "ViewController.h" #define BUFFER_OFFSET(i) ((char *)NULL + (i)) // Uniform index. enum { UNIFORM_MODELVIEWPROJECTION_MATRIX, UNIFORM_NORMAL_MATRIX, NUM_UNIFORMS }; GLint uniforms[NUM_UNIFORMS]; // Attribute index. enum { ATTRIB_VERTEX, ATTRIB_NORMAL, NUM_ATTRIBUTES }; @interface ViewController () { GLKMatrix4 _modelViewProjectionMatrix; GLKMatrix3 _normalMatrix; float _rotation; GLuint _vertexArray; GLuint _vertexBuffer; NSArray* arrayOfVertex; } @property (strong, nonatomic) EAGLContext *context; @property (strong, nonatomic) GLKBaseEffect *effect; - (void)setupGL; - (void)tearDownGL; @end @implementation ViewController - (void)viewDidLoad { [super viewDidLoad]; self.context = [[EAGLContext alloc] initWithAPI:kEAGLRenderingAPIOpenGLES2]; GLKView *view = (GLKView *)self.view; view.context = self.context; view.drawableDepthFormat = GLKViewDrawableDepthFormat24; [self setupGL]; } - (void)dealloc { [self tearDownGL]; if ([EAGLContext currentContext] == self.context) { [EAGLContext setCurrentContext:nil]; } } - (void)didReceiveMemoryWarning { [super didReceiveMemoryWarning]; if ([self isViewLoaded] && ([[self view] window] == nil)) { self.view = nil; [self tearDownGL]; if ([EAGLContext currentContext] == self.context) { [EAGLContext setCurrentContext:nil]; } self.context = nil; } // Dispose of any resources that can be recreated. } GLuint vertexBufferID; GLuint indexBufferID; static const GLfloat vertices[9] = { -0.5, -0.5, 0.5, 0.5, -0.5, 0.5, -0.5, 0.5, 0.5 }; static const GLubyte indices[3] = { 0, 1, 2 }; - (void)setupGL { [EAGLContext setCurrentContext:self.context]; // [self loadShaders]; self.effect = [[GLKBaseEffect alloc] init]; self.effect.light0.enabled = GL_TRUE; self.effect.light0.diffuseColor = GLKVector4Make(1.0f, 0.4f, 0.4f, 1.0f); glEnable(GL_DEPTH_TEST); // glGenVertexArraysOES(1, &_vertexArray); // glBindVertexArrayOES(_vertexArray); glGenBuffers(1, &vertexBufferID); glBindBuffer(GL_ARRAY_BUFFER, vertexBufferID); glBufferData(GL_ARRAY_BUFFER, sizeof(vertices), vertices, GL_STATIC_DRAW); glGenBuffers(1, &indexBufferID); glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, indexBufferID); glBufferData(GL_ELEMENT_ARRAY_BUFFER, sizeof(indices), indices, GL_STATIC_DRAW); glEnableVertexAttribArray(GLKVertexAttribPosition); glVertexAttribPointer(GLKVertexAttribPosition, // Specifies the index of the generic vertex attribute to be modified. 3, // Specifies the number of components per generic vertex attribute. Must be 1, 2, 3, 4. GL_FLOAT, // GL_FALSE, // 0, // BUFFER_OFFSET(0)); // // glBindVertexArrayOES(0); } - (void)tearDownGL { [EAGLContext setCurrentContext:self.context]; glDeleteBuffers(1, &_vertexBuffer); glDeleteVertexArraysOES(1, &_vertexArray); self.effect = nil; } #pragma mark - GLKView and GLKViewController delegate methods - (void)update { float aspect = fabsf(self.view.bounds.size.width / self.view.bounds.size.height); GLKMatrix4 projectionMatrix = GLKMatrix4MakePerspective(GLKMathDegreesToRadians(65.0f), aspect, 0.1f, 100.0f); self.effect.transform.projectionMatrix = projectionMatrix; GLKMatrix4 baseModelViewMatrix = GLKMatrix4MakeTranslation(0.0f, 0.0f, -4.0f); baseModelViewMatrix = GLKMatrix4Rotate(baseModelViewMatrix, _rotation, 0.0f, 1.0f, 0.0f); // Compute the model view matrix for the object rendered with GLKit GLKMatrix4 modelViewMatrix = GLKMatrix4MakeTranslation(0.0f, 0.0f, -1.5f); modelViewMatrix = GLKMatrix4Rotate(modelViewMatrix, _rotation, 1.0f, 1.0f, 1.0f); modelViewMatrix = GLKMatrix4Multiply(baseModelViewMatrix, modelViewMatrix); self.effect.transform.modelviewMatrix = modelViewMatrix; // Compute the model view matrix for the object rendered with ES2 modelViewMatrix = GLKMatrix4MakeTranslation(0.0f, 0.0f, 1.5f); modelViewMatrix = GLKMatrix4Rotate(modelViewMatrix, _rotation, 1.0f, 1.0f, 1.0f); modelViewMatrix = GLKMatrix4Multiply(baseModelViewMatrix, modelViewMatrix); _normalMatrix = GLKMatrix3InvertAndTranspose(GLKMatrix4GetMatrix3(modelViewMatrix), NULL); _modelViewProjectionMatrix = GLKMatrix4Multiply(projectionMatrix, modelViewMatrix); _rotation += self.timeSinceLastUpdate * 0.5f; } int i; - (void)glkView:(GLKView *)view drawInRect:(CGRect)rect { glClearColor(0.65f, 0.65f, 0.65f, 1.0f); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); // glBindVertexArrayOES(_vertexArray); // Render the object with GLKit [self.effect prepareToDraw]; //glDrawArrays(GL_TRIANGLES, 0, 3); // Render the object again with ES2 // glDrawArrays(GL_TRIANGLES, 0, 3); glDrawElements(GL_TRIANGLE_STRIP, sizeof(indices)/sizeof(GLubyte), GL_UNSIGNED_BYTE, indices); } @end

Read the article

Help understanding some OpenGL stuff

- by shinjuo

I am working with some code to create a triangle that moves with arrow keys. I want to create a second object that moves independently. This is where I am having trouble, I have created the second actor, but cannot get it to move. There is too much code to post it all so I will just post a little and see if anyone can help at all. ogl_test.cpp #include "platform.h" #include "srt/scheduler.h" #include "model.h" #include "controller.h" #include "model_module.h" #include "graphics_module.h" class blob : public actor { public: blob(float x, float y) : actor(math::vector2f(x, y)) { } void render() { transform(); glBegin(GL_TRIANGLES); glVertex3f(0.25f, 0.0f, -5.0f); glVertex3f(-.5f, 0.25f, -5.0f); glVertex3f(-.5f, -0.25f, -5.0f); glEnd(); end_transform(); } void update(controller& c, float dt) { if (c.left_key) { rho += pi / 9.0f * dt; c.left_key = false; } if (c.right_key) { rho -= pi / 9.0f * dt; c.right_key = false; } if (c.up_key) { v += .1f * dt; c.up_key = false; } if (c.down_key) { v -= .1f * dt; if (v < 0.0) { v = 0.0; } c.down_key = false; } actor::update(c, dt); } }; class enemyOne : public actor { public: enemyOne(float x, float y) : actor(math::vector2f(x, y)) { } void render() { transform(); glBegin(GL_TRIANGLES); glVertex3f(0.25f, 0.0f, -5.0f); glVertex3f(-.5f, 0.25f, -5.0f); glVertex3f(-.5f, -0.25f, -5.0f); glEnd(); end_transform(); } void update(controller& c, float dt) { if (c.left_key) { rho += pi / 9.0f * dt; c.left_key = false; } if (c.right_key) { rho -= pi / 9.0f * dt; c.right_key = false; } if (c.up_key) { v += .1f * dt; c.up_key = false; } if (c.down_key) { v -= .1f * dt; if (v < 0.0) { v = 0.0; } c.down_key = false; } actor::update(c, dt); } }; int APIENTRY WinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, char* lpCmdLine, int nCmdShow ) { model m; controller control(m); srt::scheduler scheduler(33); srt::frame* model_frame = new srt::frame(scheduler.timer(), 0, 1, 2); srt::frame* render_frame = new srt::frame(scheduler.timer(), 1, 1, 2); model_frame->add(new model_module(m, control)); render_frame->add(new graphics_module(m)); scheduler.add(model_frame); scheduler.add(render_frame); blob* prime = new blob(0.0f, 0.0f); m.add(prime); m.set_prime(prime); enemyOne* primeTwo = new enemyOne(2.0f, 0.0f); m.add(primeTwo); m.set_prime(primeTwo); scheduler.start(); control.start(); return 0; } model.h #include <vector> #include "vec.h" const double pi = 3.14159265358979323; class controller; using math::vector2f; class actor { public: vector2f P; float theta; float v; float rho; actor(const vector2f& init_location) : P(init_location), rho(0.0), v(0.0), theta(0.0) { } virtual void render() = 0; virtual void update(controller&, float dt) { float v1 = v; float theta1 = theta + rho * dt; vector2f P1 = P + v1 * vector2f(cos(theta1), sin(theta1)); if (P1.x < -4.5f || P1.x > 4.5f) { P1.x = -P1.x; } if (P1.y < -4.5f || P1.y > 4.5f) { P1.y = -P1.y; } v = v1; theta = theta1; P = P1; } protected: void transform() { glPushMatrix(); glTranslatef(P.x, P.y, 0.0f); glRotatef(theta * 180.0f / pi, 0.0f, 0.0f, 1.0f); //Rotate about the z-axis } void end_transform() { glPopMatrix(); } }; class model { private: typedef std::vector<actor*> actor_vector; actor_vector actors; public: actor* _prime; model() { } void add(actor* a) { actors.push_back(a); } void set_prime(actor* a) { _prime = a; } void update(controller& control, float dt) { for (actor_vector::iterator i = actors.begin(); i != actors.end(); ++i) { (*i)->update(control, dt); } } void render() { for (actor_vector::iterator i = actors.begin(); i != actors.end(); ++i) { (*i)->render(); } } };

Read the article

Making your ASP.NET/HTML Websites Indic aware – accepting Tamil, Telugu, Kannada, Hindi and ot

- by Harish Ranganathan

Its been a month since I wrote my last post. Much of work has been happening around planning for Tech Ed India, the upcoming Virtual TechDays this week as well as our Developer content at the Great Indian Developer Summit 2010. Its going to be one exciting period starting this week and I am glad I would be able to meet a lot of folks who have written to me personally that they would like to catch up at Tech Ed India. For now, I had a chance to meet the Microsoft India Development Centre team that worked on the Microsoft Indic Language Input Tool (erstwhile Akshara). The team updated me that they have also released the scripts so that the Indic input feature can be encapsulated into your own websites. For example, if you are having a web page where you collect user information, you can pretty much make your site indic aware i.e. accept inputs in Tamil, Telugu, Kannada, Hindi etc., All you would need to include would be a bunch of scripts onto your web pages and you are ready to make it, like I said, “indic aware” I have built a sample web page that accepts First Name, Last Name, Address and an additional field. When it comes to accepting indic, sometimes, you may want to avoid the indic input in certain fields and accept it in English. You can specify the MicrosoftILITWebAttach="false" attribute to the Text Boxes and Text Areas (TextMode=”Multiline” in ASP.NET) so that the particular field automatically switches over to English input. Similarly, the moment you specify that the TextMode=”Password” to make it as a password field, it automatically ignores all indic recognition and shows the masked dots for the words entered. Note that, this is, when we are going for the Opt-out mode, where we are specifying that by default all the input controls would need indic awareness and we would specify for those controls where it is not required. The other mode is Opt-in mode where you would need to add a different property to the script definition i.e. attachMode=”optin” . When we do this, we need to explicitly add the MicrosoftILITWebAttach="true" attribute for every control where we need indic input. I have created a sample web page which accepts First Name, Last Name, Address and an additional input field to demonstrate the “Opt-out”. You can copy paste this into any of your web pages to check it <form id="form1" runat="server">  <input type="hidden" id="MicrosoftILITWebEmbedInfo" attachMode="optout" value="" /> <script type="text/javascript" src="http://ilit.microsoft.com/bookmarklet/script/Tamil.js" defer="defer"></script> <div> <h2> Welcome to the Registration Page </h2> <p> First Name: <asp:TextBox runat="server" ID="txtFirstName" /> <br /> <br /> Last Name: <asp:TextBox runat="server" ID="txtLastName" /> <br /> <br /> Password: <asp:TextBox runat="server" ID="txtPassword" TextMode="Password" /> <br /> <br /> Address: <asp:TextBox runat="server" ID="txtAddress" TextMode="MultiLine" Height="100" Width="200" /> <br /> <br /> English Text: <asp:TextBox ID="txtEnglishText" runat="server" MicrosoftILITWebAttach="false" /> </p> <p>  <a style="text-decoration: none" href="http://go.microsoft.com/fwlink/?LinkID=184205&clcid=0x409"><img style="border: 0px" alt="Transliteration by Microsoft" src="http://ilit.microsoft.com/bookmarklet/images/attribution.png"></a> </p> </div> </form> If you note the code snippet above, I have included the scripts in the top with the attachMode set to “optout” and for the last TextBox, I have mentioned the MicrosoftILITWebAttach="false” attribute to make it accept English input. Additionally, you also need to add the “Microsoft Indic Language Input Tool attribution image” to your web page as a courtesy to the team that developed this feature. It would basically add a image saying “Transliteration by Microsoft” similar to a Copy Right image. You can see the screen shot below where I have typed it in Tamil. In that you will notice that the password field behaves as expected and the last field accepts English Text. You can also notice the icon that comes in the first textbox that indicates that, the field is going to accept indic text. This sample is using Tamil, but you can pretty much do it for Hindi, Telugu, Kannada, Marathi, Bengali etc., The website for getting the Indic script and other instructions is http://specials.msn.co.in/ilit/WebEmbed.aspx?language=Tamil You can replace the querystring value “Tamil” to other languages as mentioned above to get the respective script. This also works for plain HTML based websites and doesn’t necessarily need you to use ASP.NET to achieve the functionality. Note that, this form is not completely localized. This is transliterated. You can add label controls for FirstName, LastName indication etc., and use the Visual Studio tools to localize and get those values from resource files. In the resource files, you can enter the text in different languages to make this a truly localized page. If you just want to download the Indic Tool Desktop version (that can be used for typing in Word, Excel, pretty much any input area), you can download it from http://specials.msn.co.in/ilit/ In the same page, there is also a web version where you can type and get text then and there if you dont want to install the desktop version. So, go ahead, download / use them in your websites and enjoy the power of Indic. Cheers !!!

Read the article

Composing Silverlight Applications With MEF

- by PeterTweed

Anyone who has written an application with complexity enough to warrant multiple controls on multiple pages/forms should understand the benefit of composite application development. That is defining your application architecture that can be separated into separate pieces each with it’s own distinct purpose that can then be “composed” together into the solution. Composition can be useful in any layer of the application, from the presentation layer, the business layer, common services or data access. Historically people have had different options to achieve composing applications from distinct well known pieces – their own version of dependency injection, containers to aid with composition like Unity, the composite application guidance for WPF and Silverlight and before that the composite application block. Microsoft has been working on another mechanism to aid composition and extension of applications for some time now – the Managed Extensibility Framework or MEF for short. With Silverlight 4 it is part of the Silverlight environment. MEF allows a much simplified mechanism for composition and extensibility compared to other mechanisms – which has always been the primary issue for adoption of the earlier mechanisms/frameworks. This post will guide you through the simple use of MEF for the scenario of composition of an application – using exports, imports and composition. Steps: 1. Create a new Silverlight 4 application. 2. Add references to the following assemblies: System.ComponentModel.Composition.dll System.ComponentModel.Composition.Initialization.dll 3. Add a new user control called LeftControl. 4. Replace the LayoutRoot Grid with the following xaml: <Grid x:Name="LayoutRoot" Background="Beige" Margin="40" > <Button Content="Left Content" Margin="30"></Button> </Grid> 5. Add the following statement to the top of the LeftControl.xaml.cs file using System.ComponentModel.Composition; 6. Add the following attribute to the LeftControl class [Export(typeof(LeftControl))] This attribute tells MEF that the type LeftControl will be exported – i.e. made available for other applications to import and compose into the application. 7. Add a new user control called RightControl. 8. Replace the LayoutRoot Grid with the following xaml: <Grid x:Name="LayoutRoot" Background="Green" Margin="40" > <TextBlock Margin="40" Foreground="White" Text="Right Control" FontSize="16" VerticalAlignment="Center" HorizontalAlignment="Center" ></TextBlock> </Grid> 9. Add the following statement to the top of the RightControl.xaml.cs file using System.ComponentModel.Composition; 10. Add the following attribute to the RightControl class [Export(typeof(RightControl))] 11. Add the following xaml to the LayoutRoot Grid in MainPage.xaml: <StackPanel Orientation="Horizontal" HorizontalAlignment="Center"> <Border Name="LeftContent" Background="Red" BorderBrush="Gray" CornerRadius="20"></Border> <Border Name="RightContent" Background="Red" BorderBrush="Gray" CornerRadius="20"></Border> </StackPanel> The borders will hold the controls that will be imported and composed via MEF. 12. Add the following statement to the top of the MainPage.xaml.cs file using System.ComponentModel.Composition; 13. Add the following properties to the MainPage class: [Import(typeof(LeftControl))] public LeftControl LeftUserControl { get; set; } [Import(typeof(RightControl))] public RightControl RightUserControl { get; set; } This defines properties accepting LeftControl and RightControl types. The attrributes are used to tell MEF the discovered type that should be applied to the property when composition occurs. 14. Replace the MainPage constructore with the following code: public MainPage() { InitializeComponent(); CompositionInitializer.SatisfyImports(this); LeftContent.Child = LeftUserControl; RightContent.Child = RightUserControl; } The CompositionInitializer.SatisfyImports(this) function call tells MEF to discover types related to the declared imports for this object (the MainPage object). At that point, types matching those specified in the import defintions are discovered in the executing assembly location of the application and instantiated and assigned to the matching properties of the current object. 15. Run the application and you will see the left control and right control types displayed in the MainPage: Congratulations! You have used MEF to dynamically compose user controls into a parent control in a composite application model. In the next post we will build on this topic to cover using MEF to compose Silverlight applications dynamically in download on demand scenarios – so .xap packages can be downloaded only when needed, avoiding large initial download for the main application xap. Take the Slalom Challenge at www.slalomchallenge.com!

Search Results

Search found 17785 results on 712 pages for 'model attribute'.

Page 238/712 | < Previous Page | 234 235 236 237 238 239 240 241 242 243 244 245 | Next Page >

- by Nick Wiggill

- by Topo

- by Project Dumbo Dev

- by joshea

- by thangchung

- by wcoekaer

- by Alex Kotopoulis

- by Rhames

- by Tarun

- by atrueguy

- by Stephen Walther

- by gperera

- by Alois Kraus

- by SubinDaniVarughese

- by Rodrigues, Raphael

- by Rick Strahl

- by HackedByChinese

- by Kyle Hatlestad

- by user699215

- by shinjuo

- by Harish Ranganathan

- by PeterTweed

< Previous Page | 234 235 236 237 238 239 240 241 242 243 244 245 | Next Page >