Search Results

Search found 9012 results on 361 pages for 'hardware detection'.

Page 239/361 | < Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >

• Installing VMware ESXi 4.0 on Dell 1950: Cannot open vmkboot.gz

  - by rlandster

  I am trying to install VMware ESXi 4.0.0 U1 on a Dell 1950 server via a bootable CD-ROM. I keep getting this error right at the start: Cannot open vmkboot.gz I checked that the CD-ROM drive is not to blame by installing Debian Etch using that drive. I tried several different versions of ESXi (3.5, 3.5 Dell edition, 4.0 Dell edition) and they all give me an error at the same place. I also tried installing from a USB "thumb" drive but got the same error. I checked with the VMware HCL (Hardware Compatibility List) and the Dell 1950 is listed as being compatible. Here are some server details: Two 1.6 GHz Xeon 5110 CPUs (ID: 06-0F-B) BIOS version 2.2.6 Any ideas on what might be the issue?

  Read the article

• windows seven disk check error

  - by crazybmanp

  i have gotten the error in the microsoft KB article 975778 (http://support.microsoft.com/kb/975778/en-us) i was able to get onto my computer luckily, but when i went on to get the hotfix that is stated in the article, it gave me this error when i ran it: "the update is not applicable to your computer." is there any way of getting the disk check error to stop, or to get this fix to work. i will answer any questions on hardware if you post the questions in the comments. answers to questions this is the a full version that i got from ASUS as an upgrade disk from windows vista (hopefully more specific than you were asking)

  Read the article

• ATI / AMD HIS HD 7870 Graphics card fan speed below 16% / 20% 26%

  - by Thorsten Niehues

  I bought a AMD / ATI HIS HD 7870 to replace my old HD 4870. I noticed that the fan speed does not scale with the temperature: The fan speed does not get below 28% (read from catalyst / automatic fan speed) If I manually change it in the catalyst to 20% then it has the same speed than 28% : about 900-1000 rpm. With HIS iTurbo i manually can change the fan speed below 20%. But I noticed that changing the fan speed below 16% results in 3200 rpm. This is really stupid and annoying since my PC is a ultra silent PC and all fans are running with about 500 rpm when the PC is idle (windows / musik movies, etc.) Is there any way to change the fan speed to a reasonable speed like 500 rpm by software or hardware adapters (I really don't like to put a poti between the 12V line)

  Read the article

• Exchange 2010 domainprep messing up mailbox permissions on existing Exchange 2003 server

  - by tearman

  So our environment is basically we have an Exchange 2003 server, and we're attempting to move to Exchange 2010 gradually, and move to new hardware while we're at it. So our first step was obviously to get Exchange 2010 installed on the new box. However, after running the domainprep steps listed in http://technet.microsoft.com/en-us/library/bb125224.aspx (including PrepareLegacyExchangePermissions) our mailbox permissions get messed up. Normally, we have an AD security group for Exchange Administrators that allows anyone in that group to view all folders inside any user's mailbox. However, now, this functionality is gone and our Exchange Admins can't access anyone's mailboxes. We'd like to get this functionality back if we could. Thanks

  Read the article

• BSOD 0x000000f4(Probably caused by : wininit.exe)

  - by vacuum

  I have BSOD with 0x000000f4 code. It appears when system is not loaded at all. No new hardware where intalled. Only nvidia drivers where updated 3 days ago and they are up to date for now(version 296.10). System Health Report(perfmon /report) shows nothing interesting(only complained on disabled UAC) System is on SSD disk(WDC SSC-D0064SC-2100 B) Dump Spec: OS Name Microsoft Windows 7 Ultimate Version 6.1.7601 Service Pack 1 Build 7601 System Manufacturer Gigabyte Technology Co., Ltd. System Model P31-DS3L System Type x64-based PC Processor Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz, 2534 Mhz, 2 Core(s), 2 Logical Processor(s) BIOS Version/Date Award Software International, Inc. F9, 10.07.2008 Any suggestions?

  Read the article

• Color Calibrate Dual Monitor XP SP2

  - by Laramie

  This topic has been touched on before but not really answered. I have a dual monitor system and the colors differ wildly. I currently live Buenos Aires where color correction hardware costs premium prices. I do some graphic design, but don't require a pro-level calibration. That said, I'd like my monitors to be set as close to "true color" as possible. I've located the useful and free Monitor Calibration Wizard, but it seems to adjust the entire system internally at startup. I could use the Microsoft Color Control Panel Applet to set a different ICC or ICM profile for each monitor, but the Monitor Calibration Wizard outputs its own format for profiles.

  Read the article

• Can I upgrade an Asus M51Sn laptop to 2x4GB of RAM? (DDR2)

  - by matteo

  My Asus M51Sn has 2 RAM slots which currently have 1x1GB + 1x2GB DDR2-800 SODimm RAM modules installed. I've found out that 4GB DDR2 SODimm modules do exist, though they are impossible to find in local stores nere here, but I've found them in online stores like these: http://www.pccomponentes.com/g_skill_ddr2_800_pc2_6400_4gb_so_dimm.html They seem to meet the specification, so can I replace both my current modules with 2x4GB modules, and reach a total of 8GB? Or should I worry about some limit (e.g. 4GB max or 2GB per slot) imposed by the matherboard, chipset or whatever? (I currently use Ubuntu 12.04 32 bit, so I plan to use the pae kernel, which supposedly supports 4GB ram on a 32bit system; or I may consider switching tu 64bit ubuntu; the question is about hardware limitations, not OS limitations).

  Read the article

• What could explain my partitions disappearing on a new SSD with Windows 7?

  - by charlesrandall

  So this morning, I had a fresh install of Windows 7 pro, on a new SSD (Patriot TorqX 128gb), which I just put in to a new Dell Studio XPS 9000. Everything was fine. I booted to windows, no problem. I go to work. 8 hours later, I come home, and I'm greeted by my boot screen complaining about no bootable devices. Windows repair from the Windows 7 pro disk says it can't fix the problem. It doesn't see any windows installs. I boot up GParted, and my SSD is completely unallocated. No space used, no partitions. Perhaps this is related to allowing windows 7 to create a utility partition when I installed? Only thing I can think of. Is there some kind of known hardware issue that can result in an SSD completely wiping itself?

  Read the article

• Latitude E6410 - Screen flickering on Windows 8

  - by Martin

  On Windows 8, my Latitude E6410 screen (1440x900 - 60Hz - NVidia NVS3100M) is flickering. If I turn off the laptop for 30 minutes and turn it back on, there's no flickering but it eventually start again after 10-15 minutes. The flickering seems more present at the top and bottom of the screen. I already updated the graphic card drivers, bios, etc. Nothing seems to fix the issue. To prove that it isn't a hardware issue, when I reinstalled Windows 7 I couldn't reproduce the issue. Any idea what could cause this?

  Read the article

• Physically moving a hard drive from older iMac (c2d) to new iMac (i7) ?

  - by Inshim

  Instead of my usual habit of using superduper to mirror my drive to a new computer, I just physically moved the hard drive from an older iMac to a new one. But... it now doesn't boot, getting stuck at the apple logo screen. Since the hard drive that came with the new iMac works well, and my old drive works well when I return it to the older iMac, I conclude that there is some problem at the system/kernel level due to the different hardware. In the past I did similar things (e.g. starting a C2D machine from a Core Duo in target disk mode), so perhaps the change in architecture to the i5/i7 is too problematic? The main point: do you know of any way to get the system to rebuild for itself the proper versions of the system components when booting? Are there certain directories that I can safely delete to make that happen? Thanks

  Read the article

• How can I easily identify all keyboard shortcuts (hotkeys) on OS X and current running Applications

  - by Michael Prescott

  By default, the function keys on my MacBook Pro control various hardware features and native operating system applications like the brightness of the LCD, Expose, or iTunes. I like these buttons and can use the fn button to take advantage of application Function keys when working with certain applications. Some service-type, background applications also have useful keyboard shortcuts. I tend to forget which keys are active at the moment and sometimes launch the wrong processes. Is there an application or operating system, native way of identifying all of the currently available keyboard shortcuts?

  Read the article

• AHCI and Memtest86+

  - by satanicpuppy

  I've got a motherboard with SATA AHCI enabled, and I need to disable it to run Memtest86+ (because Window's built-in RAM diagnostic tool isn't worth a barrel of warm snot), and because the Memtest developers are too lazy to fix the bootloader problem. Fine, I know how to do that. The problem is, I, in a moment of insanity driven by the fact that I work with hardware RAID cards all the time, felt the need to enable the onboard RAID. In retrospect, this was stupid: the onboard raid is a joke, but I'm stuck with it. My question is, if I disable AHCI am I going to lose the RAID information? I haven't been able to find a definitive yes or no anywhere, and I'm not in the mood to find out the hard way.

  Read the article

• Going from dev to sysadmin advice [on hold]

  - by dotnetdev

  I've seen the threads on here about transitions to/from sysadmin. My story is I am a dev (technology is irrelevant), but in learning that technology it required a lot of server infrastructure. In the last few years, I thus had to setup a lot of infrastructure (AD, DNS, SQL etc) to learn said technology. I've noticed that I've enjoyed doing sysadmin and got quite good at it, and find it even engrossing (e.g. I am amazed by how decievingly complicated AD is, under the hood). I'm now thinking of moving into IT infrastructure after about 4 years in various dev (.NET) roles. Any advice? My concern is that I don't have any experience with hardware load balancers and firewalls like F5 etc, which some jobs require. How could I compensate for that? Also, I'm rubbish with my hands, would this be a factor? (i.e. maintaining physical kit)? Thanks

  Read the article

• sound volume increase beyond 100% whenever possible on linux

  - by fakedrake

  Some audio output from files or streams is too low. It is obvious that hardware is able to play the same sounds but louder but because of the data it just plays it at some low level even at 100% volume. Vlc can generally increase the volume of a file up to 200%. Is there a way to do the same thing VLC does system-wide and if possible for an arbitrary v percentage value. If there is no application that does this, where should i look into for libs to do it myself or what code should i modify(eg code in the alsamixer) thank you Note: Asked the same thing on stackoverflow and they directed me here.

  Read the article

• Is it possible to rate-limit an scp/sftp/rsync transfer from the command-line? ie, manual QoS on a s

  - by warren

  Specifically, I am looking to rate-limit an scp or sftp session in the call itself. For example, let's say I want to copy 100MB to one server, and 1GB to another. I'd like to be able to run both of these at the same time, but maintain a QoS for "normal" computer usage - somewhat similar to how you can rate-limit bittorrent. Is there a way to do this without touching the networking hardware? I'm envisioning something akin to: magic-qos-tool 'scp file user@host:/path/to/file' Or.. scp -rate 40kbps file user@host:/path/to/file

  Read the article

• Computer not acknowledging sound card after move

  - by Angela

  We just got our computer back from having moved and when I tried to hook our speaker system, the computer keeps telling me that I don't have a sound system installed. It's a Dell computer with the original surround/subwoofer system that it came with and was working fine before the move. I tried buying a new speaker system (Logitech) to see if it would work, but still saying I have no audio device installed and it's not showing up in my device manager. I opened up the computer and unplugged the sound card, then plugged it back in, still nothing. I put the install disc from the sound card in the cd-rom, but it's saying that I have no sound device hardware in my system.

  Read the article

• How to reset video/display drivers in Vista without restarting OS?

  - by jdk

  Currently I have to reboot my system if an external monitor is hooked up for it to be correctly detected and used. I think it would be faster to restart/reset the video or display drivers instead. How do I do this under Vista? I seem to remember from an old laptop using a Windows command-line command that would restart the wireless networking card device when it crashed. Is there something like that for video drivers? Background/Reason Because people rightfully ask why? - This is part of a larger problem which I'm waiting for resolution on from the manufacturer. In the meantime I'm looking for the above quick fix. Actually my video card often crashes my laptop when attaching an external monitor and trying to detect or use it. No solution from vendor yet and latest drivers do the same irksome behaviour. Windows says: A problem with your video hardware caused Windows to stop working correctly.

  Read the article

• How to reset video/display drivers in Vista without restarting OS?

  - by jdk

  Currently I have to reboot my system if an external monitor is hooked up for it to be correctly detected and used. I think it would be faster to restart/reset the video or display drivers instead. How do I do this under Vista? I seem to remember from an old laptop using a Windows command-line command that would restart the wireless networking card device when it crashed. Is there something like that for video drivers? Background/Reason Because people rightfully ask why? - This is part of a larger problem which I'm waiting for resolution on from the manufacturer. In the meantime I'm looking for the above quick fix. Actually my video card often crashes my laptop when attaching an external monitor and trying to detect or use it. No solution from vendor yet and latest drivers do the same irksome behaviour. Windows says: A problem with your video hardware caused Windows to stop working correctly.

  Read the article

• Load-balance with LAN and Wi-Fi

  - by Synox

  I have a Mac, which runs Mac OS X 10.6 or Ubuntu 9.10 or Windows XP (Multiboot). Solution can be for any of the systems, whatever works better. I have two ISPs, one can be accessed via Wi-Fi, one can be accessed via LAN. In Mac OS X I can define the priority, which network to choose first. But what I wish to do is to load-balance with both networks. I don't want to buy extra hardware. I have some unused Wi-Fi routers if this would help. Compiling and configuring programms in Linux is no problem for me.

  Read the article

• What tangible security are gained by blocking all but a few outgoing ports in a firewall

  - by Frankie Dintino

  Our current hardware firewall allows for blocking incoming and outgoing ports. We have two possibilities: Block certain troublesome ports (unsecured smtp, bittorrent, etc.) Block all but a few approved ports (http, https, ssh, imap-ssl, etc.) I see several downsides with option 2. Occasionally web servers are hosted on non-standard ports and we would have to deal with the resulting issues. Also, there is nothing preventing a malicious or unwanted service from being hosted on port 80, for instance. What are are the upsides?

  Read the article

• Cheapest Embedded System with Wireless Connectivity?

  - by geeko

  Problem: I'm trying to capture some information coming from keyboard, mouse and barcode reader connected to some PC via PS/2, USB and/or RS-232, before information get to PC and send it over the Internet to some central server. I'm thinking to do so by using some kind of hardware interface (middleware, if you like) between PC and input devices. I thought this interface can be embedded PC, PDA or simply some mobile phone with wireless connectivity. PS/2 and RS-232 could be converted to USB using some USB convector/hub that connects to one of these interface systems. Then some special API programming take place to communicate between PC, input devices and wireless server, in the form of application running on the interface system. What's the cheapest solution that can achieve this? Or possibly any other solution?

  Read the article

• Why would a terminal server be kicking users off after about 5 minutes?

  - by Matt

  I have a terminal server that was restored from an old 1U server to an IBM HS20 Blade running ESXi. The restore was using shadow protect hardware independent restore. All appeared to be functioning well but we're finding that users are being periodically kicked off after around 5 minutes or so. The interesting thing is it doesn't appear to be a simple disconnect but the whole session has gone like it was logged out. There is nothing significant in the event log, and certainly nothing from terminal services that is logged. I've also checked the client computers and from the client computers logged into our other terminal server and there wasn't any issues there. It doesn't appear to be network related. Any ideas?

  Read the article

• Installing Vista on a BSOD Windows 7 (ASAP)

  - by anonymous

  On a previous question i posted, i asked for help on fixing my windows vista box because it keeps going to blue screen. No one seems to have the answer, so now i want to install Windows 7. I want to know if i can install 7 without having to reformat my hard drive and having to lose all my files. I've already confirmed the hardware is working because i installed Ubuntu 9.10 on my external hard drive and it runs on my system fine. I tested the memory using vista's memory test and Ubuntu's memory test. here's the previous post: http://superuser.com/questions/125897/i-really-need-help-resolving-a-window-vista-bsod-blue-screen-crash-on-my-deskto

  Read the article

• Double VPN Network Authentication

  - by Pyromanci

  I have a project I'm working on and looking for some info. Right now I have a VPN network using Cisco Pix 501's for the vpn clients and a Cisco VPN Concentrator 3000 for the VPN Server. Since the Pix is constantly connected to the vpn, I want to add a extra level of authentication. Meaning when the user on the other end goes to access anything on the VPN they are asked for a username password before the connection is established. I've never done this sort of structure before. So I'm not even sure where to really being or even if my current hardware can do something like this, or if i need to through in some sort of radius/LDAP/Active Directory type server into the mix.

  Read the article

• How to secure Firefox traffic (+DNS) through SOCKS proxy under Ubuntu 10.04?

  - by Maarx

  I'm using Ubuntu 10.04, and starting a SOCKS proxy with 'ssh -D', and setting Ubuntu to use it with "System - Preferences - Network Proxy". Firefox uses the proxy, and the proxy's IP appears when I visit a site like http://www.whatismyip.com/. My question is, is Firefox resolving DNS requests through this proxy? Is my web-browsing truly secure? (That is, until I exit the other end of the proxy. I know it's insecure after that.) (And I've verified the keys, I'm not being man-in-the-middled) (And--screw it. You know what I mean. Is it resolving DNS requests through the proxy?) I don't know how I would go about verifying such a thing for myself. Using additional hardware such as another debugging proxy is not an option. If Firefox isn't resolving my DNS requests through the SOCKS proxy, how do I go about fixing it?

  Read the article

< Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >