Search Results

Search found 6636 results on 266 pages for 'jdbc driver'.

Page 239/266 | < Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >

• Laptop Overheating with Windows 8

  - by Dany Khalife

  I recently installed Windows 8 on my HP G62 Laptop and i have been noticing a very strange problem with it. Let alone, for lets say 5 minutes, without even touching it, it starts to heat up and it reaches about 60 degrees (Celsius) with absolutely no applications open (not just on desktop but overall). I dug in a little deep and found out that Maintenance was running when the computer was Idle, so i turned that off From the System's Task Scheduler, and while there i also turned off other services i did not need hoping that would solve the problem. So after a few days, i noticed that the average temperature of my laptop dropped from 55 to 48 degrees while working on Visual Studio. And when i thought the problem had disappeared, it still did show up, only not after 5 minutes, but more like 10 minutes... Here is what i have done so far: Replacing the thermal paste on the CPU and the fan and cleaning the fan (this was like 6 months ago) Using a laptop cooler Running a virus scan (i just formatted my laptop so it would be really weird if i already caught something but who knows) Right now, i believe it has something to do with my gfx driver (Even though it IS up to date, looking closely at the screen, i can see the pixels slowly refresh (kinda like watching static on TV) which i wasn't able to do on Windows 7. If you have any ideas, let me know. Thanks

  Read the article

• Linux Mint Constantly freezing on Dell XPS L502X

  - by Josh

  I recently partitioned my hard drive to dual boot the existing Windows 7 with Linux Mint because I am tired of using Windows, especially the lack of terminal. I want to eventually remove Windows 7 and just run it from a VM within Linux Mint, but I want to make sure that I like the Mint before going all in. I ran Linux Mint on a VM inside Windows for a while, enjoyed it, and never had any issues with it. Since installing on my hard drive it has started freezing every 5-10 minutes, and the only way to get it back is to either power down, or close the lid and reopen once it sleeps. I've also tried running Ubuntu on dual boot in the past, and while it never froze, the battery life was terrible, and the fan was constantly running. I'm experiencing the same battery/fan problem with Mint, which doesn't make sense to me, as Linux should be lighter on the CPU than windows. If I had to guess I'd say it's probably a driver thing, with my video card or fan or something. My battery life in Windows is ~2 hours and its about 40 minutes in Linux. At this point, that is even if my laptop doesn't freeze before then. On a less important note, I also have an intel Centrino 6150 WiMax card that I'd like to be able to use, but that won't register on the Linux system either. I have tried downloading drivers for both of these, but neither have solved my problems. I'm definitely getting frustrated and am getting close to giving up on Linux even though I dread working on a Windows machine.

  Read the article

• Why do disk images hosted on a read-only HFS+ partition behave differently?

  - by deceze

  I have come across the following phenomenon and would like to know how leaky Windows' file system abstraction is or if there's something else involved. I partitioned the hard disk of my MacBook Pro and installed Windows 7 (64 bit). The Boot Camp driver package includes file system drivers that enable Windows to access the Mac OS HFS+ partition. It's read-only access, but it works. Now, I have some disk images of stuff I usually install, so I grabbed a copy of Daemon Tools to mount them. When I mount an image saved on the HFS+ partition, about two out of three installers on these disks (usually InstallShield) crash with all sorts of weird errors. Most are just gibberish that lead to all sorts of non-solutions on Google, one was "This application is not the right type for your computer, check if you need 32 or 64 bit versions." When moving the image files to another Windows 7 computer on the network and mounting them from the network share, they work fine. My question now is, why do applications behave differently depending on whether the read-only image file, which should be abstracted away through the read-only virtual Daemon Tools drive, is located on a read-only HFS+ partition or on a Windows network share? And I'll just roll this into the question as well since I was wondering: Does the file system of a network share matter? Does the client system need to understand the file system of the share host or is that abstracted away in SMB?

  Read the article

• Flickering dual screens in Virtual Box Ubuntu 13.10 Guest

  - by alexleonard

  I have Ubuntu 13.10 x64 installed as a guest in VirtualBox (under a Windows 8.1 host) and have the settings for the virtual machine setup to run with a monitor count of 2, 128MB video memory and 3D acceleration enabled. In my guest I have the virtual box additions installed (which allowed me to have two 1920x1080 screens). Here's a screenshot of my VM settings. My laptop is an Asus N550JV which has both Intel's HD Graphics 4600 GPU and Nvidia's GeForce GT 750M. By default though I believe the Intel GFX card is being used to render the VM. When I boot up the VM it loads perfectly on dual screens, however whenever I move the mouse from one screen to the other (I have a Dell S2340L running over a HDMI connection as a second screen) the screen flickers. I've tried a variety of settings changes in both Ubuntu and the VM settings, but cannot seem to stop this screen flicker. I also used the NVidia control panel in Windows to force the dedicated graphics card to always be used but found that the display driver sometimes crashed whilst working in the VM, resulting in my VM session being destroyed, so I figured it's better to stick with the Intel GFX as that appears to be more stable. I also tried without 3D acceleration but that was much worse, and if I ran the VM with a low amount of graphics memory it really struggled. Here's my dmesg output: http://pastebin.com/1LJuYWMj (not sure if this is helpful in this situation). I read some posts suggesting changes to /etc/X11/xorg.conf but I don't appear to have an xorg.conf file. There were also a few posts (though related to Synergy) suggesting running xset -dpms but this command doesn't appear to have had any effect for me. As an additional note, I'm finding that window drawing in the guest is a little laggy/glitchy. For example, quickly scrolling through a web page may result in parts of the viewport displaying original content. Certainly I notice drawing issues most in the web browser, but it also impacts other software with parts of the window not being drawn when, say, switching between accounts in thunderbird. Any suggestions greatly appreciated!

  Read the article

• Burners freezing the PC when starting lead write in

  - by steve

  hi guys ,am having trouble with new pioneer dvdr-219l dual layer burners ,have replaced old burners with these dual layer ones . they are sata attached ,have tried img burn, xbox360 cookie burner, dvd decrypter, dvd flick , the burners seem ok burning cd and normal dvds but when trying to burn an iso to dual layer they will both freeze at the lead in write , the pc freezes including alt/delete mouse etc so have to re-boot,have tried uninstalling all burning programs that i have to eliminate conflicts and re-installing 1 at a time to see if that was the problem , still no solution am starting to think that maybe i have a bad sata cable the pc and burners dont seem to talk to each other when trying to burn dual layer ,any suggestions ???? this problem is giving me the shits ,ran microsofts fix it program and it said i had no burners installed that were capable of burning , i have had a look at device manager and the burners are there and when trouble shooted it says they are working ok , have noticed in device manager that the driver for these burners is from B.H.A.corporation file version 8.0.0.5. copyright 2000-2006 and they are not digitally sighned these burners are the latest models so how com the drivers are so old ...help please . steve

  Read the article

• The Wifi is working fine but no internet connection in Windows 8 [migrated]

  - by Ali

  I'm currently having a Problem with my msi GT70 laptop. my laptop is running windows 8 and yesterday it requested a Restart to Update. after the Restart and the update I tried to surf the net through google chrome, the WiFi connection is perfect but the page I tried to access is not loading at all, after a while it shows failure to load page. I disabled and reenabled the WiFi chip through the device manager but still no internet connection. I uninstalled and reinstalled the drivers, still no internet. I updated the Driver of the wifi, still no internet, I even went to Wifi configuration and tried to change the DNS and reset it back to automatically, still no Luck.. I'm really lost I don't know what to do, I don't want to go deep and play with Laptop DNA "aka: registry file" and screw things up. I really appreciate any help in this matter. thanks in advance. Note: I tried to access many pages but no luck. I even tried Firefox, Opera, even ie still no luck. The internet is working fine on my tablet and cellphone, except for the Laptop.

  Read the article

• How to set TV-out options under Linux of an Geforce 9600 GT video card

  - by polemon

  I'm using the TV-out connector of my Geforce 9600 GT to connect it to an old TV set. It's obviously in Composite mode, the other two cables of Component video are dead, only Pb/VIDEO labeled one gives me a signal. The picture appears black/white on the TV, I presume it's because the video card gives me an NTSC signal, but it's a PAL tv set. How do I change the TV-out from NTSC to PAL? My Component to SCART adapter hasn't arrived yet, but I think I should be able to set manually, whether the signal should be Composite or Component. How do I switch modes of the TV-out, between Component and Composite? I'm running Linux, so it's probably some settings I need to make in xorg.conf. Edit: I got this far: I need to set in the "Device" section of my xorg.conf: Option "TVStandard" "PAL-B" Option "TVOutFormat" "COMPOSITE" The whole section looks like this now: Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9600 GT" Option "AddARGBGLXVisuals" "True" Option "TVStandard" "PAL-B" Option "TVOutFormat" "COMPOSITE" EndSection How can I list all available settings for "TVStandard" and "TVOutFormat"?

  Read the article

• Vlaning on WNR3500L

  - by ageis23

  When I try connecting to my wireless network it attempts to connect then gives up. There's something strange going on with the mac's. The eternet switch and all the vlan interfaces have a mac 00:FF:FF:FF:FF:FF. config 'switch' 'eth0' option 'vlan0' '2 3 4 8*' option 'vlan1' '0 8' option 'vlan2' '1 8' config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'lan' option 'type' 'bridge' option 'ifname' 'eth0.1' option 'proto' 'static' option 'netmask' '255.255.255.0' option 'ipaddr' '192.168.2.1' option 'ip6addr' '' option 'gateway' '192.168.1.253' option 'ip6gw' '' option 'dns' '' config 'interface' 'wan' option 'ifname' 'eth0' option 'proto' 'dhcp' option 'ipaddr' '192.168.1.8' option 'ip6addr' '' option 'netmask' '255.255.255.0' option 'gateway' '192.168.1.253' option 'ip6gw' '' option 'dns' '192.168.1.253' config 'interface' 'dmz' option 'ifname' 'eth0.2' option 'proto' 'static' option 'ipaddr' '192.168.0.1' option 'netmask' '255.255.255.0' Any help on this will be greatly appreciated! When I try setting the mac using macaddr it does nothing. It works perfectly fine when I turn the authentication off. I've also discovered that when wpa2 is switched on I don't receive a association reply from ap. thats my hostapd.conf interface=eth1 driver=broadcom bridge=br-lan ssid=O2BB3 wpa=2 wpa_passphrase=prettywoman wpa_key_mgmt=WPA-PSK rsn_pairwise=CCMP Btw that password is only temporary while am testing.

  Read the article

• Looking for way to log process terminations on OS X (Mac)

  - by Stan Sieler

  I'm looking for a way to log all process terminations on my Mac (OS X 10.6.8). (And see pid, timestamp, process name) I've implemented something similar for HP-UX, but it required a kernel-level driver and intercepting several variations of "exit()" (the normal one, and the one invoked on behalf of a process while it's aborting). Why do I want the info? I've been seeing messages in my system log file (dmesg) like: CODE SIGNING: cs_invalid_page(0x1000): p=91550[GoogleSoftwareUp] clearing CS_VALID CODE SIGNING: cs_invalid_page(0x1000): p=92088[GoogleSoftwareUp] clearing CS_VALID Although dmesg lacks timestamps, apps/Utilities/Console : Database : all : search for CS_VALID shows that the messages appears about once every 58 1/2 minutes. I suspect the number after "p=" is a process id (pid) ... but for a process that has long since terminated by the time I see the message. So, if there was a process termination log mechanism that recorded the pid, the time of termination, the reason for termination, and the process name (at time of termination), that would probably allow me to determine who's causing those errors to be logged! (No, I'm not running Chrome on my Mac, and "ps -ef | grep -i goog" gets no hits either ... I'm not consciously running any Google apps on the Mac) thanks, Stan [email protected]

  Read the article

• Nvidia: force 1920x1080 as an option

  - by progo

  Proprietary Nvidia (290) on gentoo here. I'm running Nvidia TwinView with two 1680x1050 monitors here. Now I want to hotplug between HDTV and one of the monitors. Almost good, but since Nvidia reads the EDID information of the monitors and sees the maximum resolution of 1680x1050, it won't allow 1920x1080. "Detect displays" of nvidia-settings doesn't do anything. My only option this far is to restart X, but this is highly unpreferable. I already discovered that something towards my liking can be done with MetaModes, but it doesn't allow larger resolutions either. I guess I have to drop the EDID information and specify modes manually. However, TwinView hasn't liked my offerings thus far. Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection # inputdevice junk removed; it's overridden anyway Section "Monitor" Identifier "CRT-0" ModelName "Acer P221W" HorizSync 31-84 VertRefresh 56-77 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 7600 GS" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "MetaModes" "CRT: 1680x1050 +1680+0, DFP: 1680x1050 +0+0; CRT: 1680x1050 +0+0, DFP: 1920x1080 +1680+0" #Option "UseEdid" "false" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• "Can't find root filesystem / error mounting /dev/root" when booting to new kernel

  - by salparadise

  I am trying to upgrade my kernel from 2.6.18-274 to 2.6.39 for some wireless card drivers. When I boot into the new kernel I get the "Can't find root filesystem / error mounting /dev/root" googling led me to this page http://fedoraproject.org/wiki/Common_kernel_problems#Can.27t_find_root_filesystem_.2F_error_mounting_.2Fdev.2Froot From what I am reading seems to be an issue with a driver for my SATA controller or HD, but I can't find what option I need to add to the kernel. Doing a diff from the old initrd to the new one gives me the following: root-> diff /tmp/kafter /tmp/kbefore 6a7,8 > lib/dm-message.ko > lib/dm-region_hash.ko 8a11 > lib/dm-raid45.ko 13d15 < lib/dm-region-hash.ko 16a19 > lib/dm-mem-cache.ko Do I need any of those? not sure if I would need dm-raid45.ko as I am not running a raid. I have the same SATA and IDE options configured for both kernels so not sure what else to look for, any help is appreciated. Additionally here is the HW info: 00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Hewlett-Packard Company Unknown device 3006 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 233 I/O ports at 1818 [size=8] I/O ports at 1830 [size=4] I/O ports at 1820 [size=8] I/O ports at 1834 [size=4] I/O ports at 14f0 [size=16] Capabilities: [70] Power Management version 2 root-> smartctl -a /dev/sda ... === START OF INFORMATION SECTION === Device Model: WDC WD5000AADS-00S9B0

  Read the article

• Windows 7 hangs with 100% disk activity but only when online

  - by jeremy

  I have the same problem as seemingly many other people here, and I think we might all be experiencing the same issue: a compatibility issue in Windows 7 between hard drive and network controller or drivers. I've tried firmware updates of my entire board, wiping my drive and reinstalling from scratch. And yet the problem persists, which suggests it is an operating system error, as the hard drive checks out 100% physically. Additionally, the only time it does not occur is when in safe mode WITHOUT networking. With networking, there are spikes in disc access every so often and a huge flow of processes accessing the disc simultaneously that literally "stick" the disc, and physically jolting my computer unsticks it. Again, this has been tested for hours in a professional service environment, and without network access on, things are fine. As soon as there's network access available, the disc access occasionally cranks up to 100% and sticks everything. I'm using Microsoft Security Essentials, but this also happened under Norton, then McAfee. Again, this happened again after a complete wipe, so the likelihood of malware causing it seems low. I don't visit unsecure sites anyway, as far as I know. This, to me, narrows it down to a Windows 7 process that is somehow repeatedly corrupted, perhaps a corrupt .dll or driver, causing a conflict at the operating system level and temporary hard drive failure. I would encourage anyone who knows more about this stuff (which is probably most people!) to take a shot at this one, and I would encourage anyone else with a sticking hard drive in windows 7 64-bit to check on whether it occurs during safe mode without networking.

  Read the article

• Alternative Bluetooth Stacks for Windows 7 64bit

  - by Martin

  I have a notebook with an inbuilt Broadcom BCM2046 bluetooth adapter and several bluetooth HID-devices (mice, keyboards etc.) The operating system is Windows 7 64 bit Professional. The HID-devices all work perfectly with other computers, but on the system mentionend above, problems with some power-saving features inside the HID-devices occur (see eg. Amazon reviews for Microsoft Mobile Keyboard 6000 not waking up). I have tried the bluetooth drivers supplied by Windows update and the latest Broadcom drivers directly from the Broadcom updater software. The problems persist (I can rule out any further configuration issues or alternative device drivers, I have tried every possibility). I have tried a trial version of the BlueSoleil Bluetooth stack and it solved the wake-up problem. However the BlueSoleil stack causes some other problems, is relatively expensive and I would prefer not to use it. My question: are there any other alternative bluetooth stacks availible for Windows 7 64bit? To my knowledge there used to be Toshiba Bluetooth stack for non-Toshiba hardware, but the older versions I have found on the internet do not install, they do not seem to recognize the bluetooth hardware when installing the driver.

  Read the article

• ext3: maximum recommended partition size / handling large partitions

  - by Hansi

  Hi! I would like to do an encrypted install of Ubuntu on a 2 Terabyte drive (i.e., using LUKS/DMcrypt). In order to not have to type in passwords too often, the partitioning scheme will be 50 GB for / and about 1 TB for /home (and the rest for Windows 7), just for clarity. Even though by now LVM is regarded as being stable, I don't want to bother having more room for errors by introducing unnecessary layers of complexity. For both Ubuntu partitions I want encrypted ext3 with the default blocksize of ext3 (4k?). Thoughts: When I look at most partition schemes here on this site or elsewhere, I usually see at most about 400 or 500 GB partitions (maybe I didn't see enough). There may be different reasons for this, but is reliability an issue here? Are larger ext3 partitions, like about 1 TB, harder to handle for the OS or filesystem driver or at some other level? If I make the partition too large, will it be harder to repair in case of corruptions? Are there some default settings for ext3 that I should change for 1 TB partitions? Question: What maximum partition size for ext3 do you recommend and why? Thanks!

  Read the article

• Why is writing to my external hard drive slow, while benchmarks show fast writing?

  - by matix2267

  I have an iOmega eGo 320GB portable drive connected through USB2.0 to my laptop running Windows Vista. It's been working fine for quite some time until recently it became very slow when writing e.g. when copying ~300MB movie over to the drive at first it is extremely fast but it actually doesn't write it only puts in cache and then hangs on last 10-20MBs for about a minute. When copying larger files it's the same story: starts fast but then slows down to ~5MB/s (sometimes even slower down to 2MB/s). Strange thing is that I have always had caching disabled for this drive (it was disabled by default and I never bothered changing it). At first I thought that the disk is dying so I checked S.M.A.R.T. values and everything is fine there. I also run chkdsk and it seemed to fix the problem - it worked fast for a few minutes but then it slowed down again. I also tried plugging it into another USB port - no difference. Additionally I noticed that reading under certain circumstances is sometimes slower e.g. loading times for some games are ~10 times longer, whereas simple copying files from this drive to my internal HDD is fast. I ran a speed benchmark using CrystalDiskMark with a 5x100MB run and strangely got these results: read write (MB/s) Seq 33.05 28.25 512k 17.30 15.27 4k 0.267 0.372 4kQD32 0.510 0.260 This is different from what most other people have (I've found many threads about slow disk write while googling but all of them were slow on benchmarks too) which is why I decided to post this problem here. BTW most of the time when writing (or sometimes reading) the activity led is mostly idle (blinks a while and then stops for longer, sometimes has slower blinks ~1 sek, sometimes goes off for a few seconds - extremely long blink :) ) but when benchmarking, defragmenting or just reading (copying from this drive, installing apps from installers there, watching HD videos) it is blinking really fast (like it should) and there are no slowdowns. It shouldn't be driver issue unless stock Windows drivers have some issues I'm not aware of.

  Read the article

• Ignore non-unicode programs language when installing software

  - by mitya

  This is something that is driving me nuts for a while and I haven't been able to find a solution for this problem anywhere. I am running Windows 7 and my "Language for non-Unicode programs" setting is set to Russian. I need for some non-unicode software that has a Russian UI. However, for most of my software I prefer to use the English UI. A lot of software out there is multilingual and is too smart for my liking. When installing, it switches the UI to Russian and the software UI stays in Russian after the installation without an option to change that, besides setting the "non-unicode language" to English. It switches back to Russian once I revert the setting and reboot. Most of the time it is driver software, i.e: Intel, HP, etc. How can force the installation to run English and stay that way after install, ignoring the "Language for non-Unicode programs" setting? Now, I understand this might be specific to the installer: MSI, Install Shield, etc. But any solution will be good, even if I have to apply it for every software installation. Thanks in advance for any helpful information!

  Read the article

• Looking for a real DisplayPort hub/splitter

  - by squircle

  In my search for a new display, I came across the Dell Multi-Monitor Hub MMH11, which seemed to be an alternative to my search for daisy-chainable DisplayPort displays. However, before I cave and spend $179 on this device, I am wondering if this will be similar to other splitting devices where it appears to the computer as one big monitor and the device does the splitting (which I don't want). Or, does this use the packet-based nature of DisplayPort to present two/three separate displays to the computer? Also, would this device work on my MacBook Pro? (I know the Dell site says it's for Windows, but it also says that no driver installation is required. I'd assume since the MBP supports DP 1.2 it would work, but it's better to ask). Thanks! Edit: I've checked out the similar-looking Cirago DisplayPort splitter, but I have extreme doubts as to whether or not it's a genuine displayport splitter, or just another monitor-conglomerate. Their DVI solution looks identical to Dell's, which I'm pretty sure won't do what I want. I also don't want to order this DisplayPort "hub" and find that it doesn't do what I want it to.

  Read the article

• Could hybrid SSD + HDD be made with fixed internal partitions?

  - by Aaron

  I was pretty close to getting Seagate's Momentus XT but have been scared off by the many problems reported on forums and feedback sites, especially in Mac Book Pros. So I'm waiting for mk 2 with some extra flash and better reliablilty I'm assuming will come out this year. What would suit me better though is a 32+500 hybrid drive where I have more control over what is on the flash drive and what is on the disk drive. So there are 2 physical partitions within the one 2.5" hard drive enclosure which use different media internally (32GB for core files and 500GB for data and multimedia). The partitions would be locked so they can't be changed. - Or even better, the disk driver just makes them appear as two disks to the OS that share the same bus... Perhaps it's ok if the bios just sees the first drive until the OS is loaded. Is either of it technically possible? Obviously difficult to market outside of the enthusiast market. The SSD memory modules can be pretty small right, so they could even make them a card that plugs into a secondary connection on the enclosure. That would be good for computer builders as well as for upgrading and recoverability. Then future operating systems could recognise these system SSD drives and automatically install the OS + swap files on it. While placing document libraries on the larger data drive. While in the longer term HDD will probably disapear there will always be a trade off between speed, storage size and expense.

  Read the article

• ubuntu VM not detecting CDdrives

  - by Mirage

  Ihave insatlled ubuntu 10.4 on my compuer with 6 cd drives. Now initiallyi had window server 2008 and i had to install marvel raid sata controller and then my window detected all 6 drives. Now ubuntu is detecting only 3 drives and i have not found marvell drivers for ubuntu bt i have drives for window 2008. Now my question is if i have vrtual machine inside ubuntu using vmware workstation and i install that driver. then can VM dtect thse 6 drives or host has to detect those drives first to make VMs use that Ubuntu shows this thing from terminal *-cdrom:0 description: DVD-RAM writer product: DVDRAM GSA-H10N vendor: HL-DT-ST physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/cdrom2 logical name: /dev/cdrw2 logical name: /dev/dvd2 logical name: /dev/dvdrw2 logical name: /dev/scd0 logical name: /dev/sr0 version: JL10 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-cdrom:1 description: DVD writer product: DVDRRW GWA-4164B vendor: HL-DT-ST physical id: 0.1.0 bus info: scsi@0:0.1.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd1 logical name: /dev/sr1 version: 1.01 serial: [HL-DT-STDVDRRW GWA-4164B1.0105/05/12 capabilities: removable audio cd-r cd-rw dvd dvd-r configuration: ansiversion=5 status=nodisc Is t detecting all drives or thise local names just same

  Read the article

• How to restart boot Windows 7 after upgrading to a SSHD on SONY VAIO with recovery discs?

  - by Boris Okun

  The original HDD on my Sony VAIO still works, but has a damaged sector 0 and I was constantly prompted to replace the HDD because of the imminent failure. I created recovery discs as instructed, used a USB external HDD for complete back up (including Windows image back up). After installing the SSHD and using recovery discs to upload Windows and boot, I am getting the Windows welcome screen. Right after that, I'm getting the following message: Windows couldn't complete the installation. To install Windows on this computer, restart the installation. I have tried repeating the process many times all kinds of different ways and I still receive the same message. Also, when I tried to change to partitioning as the other option offered, I get the message: Windows Setup could not configure Windows to run on this computer's hardware. All troubleshooting for hardware and PCU came out solid. I tried to load the image back up from the external drive, but can't load the driver. The computer doesn't see it. Does anyone have a clue or has encountered something similar?

  Read the article

• How to scan multiple pages from a book under Linux?

  - by rumtscho

  I want the process to look like: I choose the correct scan settings (dpi, color depth, etc) I lay the first page on the scanner and trigger the process The scanner scans the page and waits for me to position the next page correctly I confirm that the next page is ready for scanning Repeat the above two steps until I tell the scanner that there are no more pages to come The scanner saves everything into a single PDF. I tried both xsane and gscan2pdf. First problem: they want me to know how many pages will be scanned. This is already a nuisance, but I can do the counting if needed. The main problem is that in step 3, the scanner does not pause. It is probably optimised for being fed loose sheets. The next scan process is triggered automatically as soon as the CCD has returned to the start position. The time the scanner needs to return the CCD is very short and I can't turn the page and position the book properly. Is there a software which can do the scan process in the way I described above, or did I just miss a setting available in xsane or gscan2pdf to make the scanner pause? If it makes any difference, the scanner is an Epson Stylus SX620FW, I run it using the manufacturer-provided driver.

  Read the article

• why does the partition start on sector 2048 instead of 63

  - by gcb

  I had two drives partitioned the same and running 2 raid partitions on each. One died and I replaced it under warranty for the same model. While trying to partition it, the first partition can only start on sector 2048, instead of 63 that was before. Driver have different geometry as previous and remaining ones. (Fewer heads/more cylinders) old drive: $ sudo fdisk -c -u -l /dev/sdb Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000aa189 Device Boot Start End Blocks Id System /dev/sdb1 * 63 174080339 87040138+ 83 Linux /dev/sdb2 174080340 182482334 4200997+ 82 Linux swap / Solaris /dev/sdb3 182482335 3907024064 1862270865 fd Linux raid autodetect remanufactured drive received from warranty: $ sudo fdisk -c -u -l /dev/sda Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 81 heads, 63 sectors/track, 765633 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d0b5d Device Boot Start End Blocks Id System /dev/sda1 2048 ... why is that?

  Read the article

• Window Server 2003 Print spooler

  - by mikenardone

  Hello Everyone in ServerFault, I am new to this website. I have been coming here to fix my own problems. I believe everyone here on this website is great. I could not find this issue anywhere. I am sure that other people had this issue. I have IBM X3850 48GB ram 2 TB of hard drives, four NIC cards. 2 Xeon 1.7 CPU. I am running VMware ESX. I believe that was the paid version if not then it is ESXI. I have 7 Servers on this server. All Window server 2003. On one of the Servers I keep on getting CPU is at 100% . So when I go into task manager and look at the processes that is going on, it is my print spooler. I have 30 different HP laserjet printers and two copiers from HP. I believe it is an driver issue, but I can't figure with one is doing this. Is there any programs for window server 2003 that finds bad print drivers.

  Read the article

• Second monitor stopped being recognized by Windows

  - by Eric J.

  One of the developer PC's running Windows Vista Ultimate had the second monitor stop being recognized in Windows overnight. There were no hardware or driver changes at the time, though I have subsequently updated to the latest nVidia drivers (card is NVIDIA GeForce 210). The non-recognized monitor IS recognized during the boot sequence. In fact, only the "bad" one shows the POST or the Windows loading screen. At some point during Windows initialization after the loading screen disappears and before the logon screen appears, the active monitor switches. Any thoughts? UPDATE: When I open the Vista monitor properties window, I see my primary display and secondary display depicted. The primary one is portrayed as the regular blue box, but the secondary one is portrayed greyed-out. I have the option to "Extend desktop to this monitor", the only resolution is 800x600, and all of the advanced monitor properties are greyed out as well. If I opt to extend the desktop, the greyed-out box turns blue, when I then select Apply the screens flash as usual and I'm given the 15 second countdown to accept the new settings and when I do, everything returns to the previously broken state... secondary monitor is portrayed greyed-out again. At no point is the desktop shown on the secondary monitor.

  Read the article

• Problem with ubuntu 10.10 running from USB drive

  - by Surjya Narayana Padhi

  Hi Geeks, I recently downloaded Ubuntu 10.10 and created an USB drive with that. I started to run the Ubuntu from that USB drive. But I am facing so much problem. I am thinking why its not so much easy like Windows to do all my job in ubuntu. Always I get some error message or to install something. This time I am getting the following errors. I am trying to download and install Aircrack-ng. So used the command sudo apt-get install aircrack-ng. But the installation stops with the following error : update-initramfs: deferring update (trigger activated) cp: cannot stat `/vmlinuz': No such file or directory dpkg: error processing bcmwl-kernel-source (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: initramfs-tools bcmwl-kernel-source E: Sub-process /usr/bin/dpkg returned an error code (1) I don't even have the aptitude command installed till now. Are all these errors because of I am running the ubuntu from USB drive? Is there any simple and easy way to go to Ubuntu Software Center and download all the required essentials at one shot and then Aircrack-ng? I could not find the Aircrack-ng in Ubuntu Software Center Can anybody give me detail steps to solve all my problems above. I am frustrated searching for updates and installations. When something works and something does not work. Can anybody suggest me how I should proceed after installing ubuntu to run on a USB drive. So that I can use the OS like Windows. Like software download,wireless driver, sound, video, documents, C:, D: all things should be there. Please somebody help.

  Read the article

< Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >