Search Results

Search found 16895 results on 676 pages for 'custom route'.

Page 24/676 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• Route traffic on vpn to another interface on an ASA 5510

  - by Dave

  I have a ASA 5510 that has about 60-70 vpn tunnels. I have four interfaces on the device: 1)External, 2)192.168.1.0, 3)192.168.2.0, 4) 192.168.3.0 A VPN tunnel is configured from the remote site (192.168.200.0) to the 192.168.2.0 subnet on the ASA. I have remote applications I would like the users at the remote site to be able to access which are hosted on the 192.168.3.0 subnet. I can route traffic between the subnets that are located on the ASA. Any way I can route traffic from the remote site to the 192.168.3.0?

  Read the article

• adding a route entry to linux routing table

  - by netg

  hi, I have two systems with ip address say 64.103.56.1(A)(Dev name -wlan0) and 64.103.225.18(B),now what i want is , everytime I ping B from my system A, it has to be routed via a router say with address 10.0.0.251(C)(I want this to be my next hop to reach B) , but this router is on a different subnetwork than the two systems.How do I do this? /* Things I tried: I used 'route add -host B gw C wlan0', and got an error saying " no such process exist or no such device found". Tried ping C and traceroute and found the gw addr at my side is some 63.103.236.3(D), so added another entry route add -host C gw D wlan0, I was able to do this without any error! */

  Read the article

• route http and ssh traffic normally, everything else via vpn tunnel

  - by Normadize

  I've read quite a bit and am close, I feel, and I'm pulling my hair out ... please help! I have an OpenVPN cliend whose server sets local routes and also changes the default gw (I know I can prevent that with --route-nopull). I'd like to have all outgoing http and ssh traffic via the local gw, and everything else via the vpn. Local IP is 192.168.1.6/24, gw 192.168.1.1. OpenVPN local IP is 10.102.1.6/32, gw 192.168.1.5 OpenVPN server is at {OPENVPN_SERVER_IP} Here's the route table after openvpn connection: # ip route show table main 0.0.0.0/1 via 10.102.1.5 dev tun0 default via 192.168.1.1 dev eth0 proto static 10.102.1.1 via 10.102.1.5 dev tun0 10.102.1.5 dev tun0 proto kernel scope link src 10.102.1.6 {OPENVPN_SERVER_IP} via 192.168.1.1 dev eth0 128.0.0.0/1 via 10.102.1.5 dev tun0 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.6 metric 1 This makes all packets go via to the VPN tunnel except those destined for 192.168.1.0/24. Doing wget -qO- http://echoip.org shows the vpn server's address, as expected, the packets have 10.102.1.6 as source address (the vpn local ip), and are routed via tun0 ... as reported by tcpdump -i tun0 (tcpdump -i eth0 sees none of this traffic). What I tried was: create a 2nd routing table holding the 192.168.1.6/24 routing info (copied from the main table above) add an iptables -t mangle -I PREROUTING rule to mark packets destined for port 80 add an ip rule to match on the mangled packet and point it to the 2nd routing table add an ip rule for to 192.168.1.6 and from 192.168.1.6 to point to the 2nd routing table (though this is superfluous) changed the ipv4 filter validation to none in net.ipv4.conf.tun0.rp_filter=0 and net.ipv4.conf.eth0.rp_filter=0 I also tried an iptables mangle output rule, iptables nat prerouting rule. It still fails and I'm not sure what I'm missing: iptables mangle prerouting: packet still goes via vpn iptables mangle output: packet times out Is it not the case that to achieve what I want, then when doing wget http://echoip.org I should change the packet's source address to 192.168.1.6 before routing it off? But if I do that, the response from the http server would be routed back to 192.168.1.6 and wget would not see it as it is still bound to tun0 (the vpn interface)? Can a kind soul please help? What commands would you execute after the openvpn connects to achieve what I want? Looking forward to hair regrowth ...

  Read the article

• Route a specific user's traffic via VPN but still allow local networking

  - by wbg

  So, I want to route certain traffic via a VPN connection and the rest via my normal Internet connection. I want to run several different programs and most of them don't support binding to a specific network interface (tun0 in my case). I've managed to send a specific user's traffic via the VPN following the answers given here: iptables - Target to route packet to specific interface? But unfortunately, when I run a server that connects to the Internet and has a web interface running on a local IP (127.0.0.1/192.168.0.*), all the Internet traffic correctly goes via tun0, but I'm unable to connect to the web interface from a local IP as a different user. When I log in as the VPN-ified user, I can access services running on local IPs, but other users/machines can't access any servers I start. Can anyone point me in the right direction?

  Read the article

• Route using certain IP address

  - by spa

  I have a server with two public IPs. Both IPs are added to eth0 using ip addr add. Now I'd like to contact a server which uses IP address filtering. Only requests are allowed which use the second IP address. Is there are way to set this up using the standard route command in Linux? I guess that's not the case. So the only solution I see right now: Setup a virtual device let's say eth0:0 and bind the second IP address to it. Then I can reference the device in the route command. Edit: I can't use the second IP as primary one easily as this IP is used as failover IP.

  Read the article

• Subterranean IL: Pseudo custom attributes

  - by Simon Cooper

  Custom attributes were designed to make the .NET framework extensible; if a .NET language needs to store additional metadata on an item that isn't expressible in IL, then an attribute could be applied to the IL item to represent this metadata. For instance, the C# compiler uses DecimalConstantAttribute and DateTimeConstantAttribute to represent compile-time decimal or datetime constants, which aren't allowed in pure IL, and FixedBufferAttribute to represent fixed struct fields. How attributes are compiled Within a .NET assembly are a series of tables containing all the metadata for items within the assembly; for instance, the TypeDef table stores metadata on all the types in the assembly, and MethodDef does the same for all the methods and constructors. Custom attribute information is stored in the CustomAttribute table, which has references to the IL item the attribute is applied to, the constructor used (which implies the type of attribute applied), and a binary blob representing the arguments and name/value pairs used in the attribute application. For example, the following C# class: [Obsolete("Please use MyClass2", true)] public class MyClass { // ... } corresponds to the following IL class definition: .class public MyClass { .custom instance void [mscorlib]System.ObsoleteAttribute::.ctor(string, bool) = { string('Please use MyClass2' bool(true) } // ... } and results in the following entry in the CustomAttribute table: TypeDef(MyClass) MemberRef(ObsoleteAttribute::.ctor(string, bool)) blob -> {string('Please use MyClass2' bool(true)} However, there are some attributes that don't compile in this way. Pseudo custom attributes Just like there are some concepts in a language that can't be represented in IL, there are some concepts in IL that can't be represented in a language. This is where pseudo custom attributes come into play. The most obvious of these is SerializableAttribute. Although it looks like an attribute, it doesn't compile to a CustomAttribute table entry; it instead sets the serializable bit directly within the TypeDef entry for the type. This flag is fully expressible within IL; this C#: [Serializable] public class MySerializableClass {} compiles to this IL: .class public serializable MySerializableClass {} For those interested, a full list of pseudo custom attributes is available here. For the rest of this post, I'll be concentrating on the ones that deal with P/Invoke. P/Invoke attributes P/Invoke is built right into the CLR at quite a deep level; there are 2 metadata tables within an assembly dedicated solely to p/invoke interop, and many more that affect it. Furthermore, all the attributes used to specify p/invoke methods in C# or VB have their own keywords and syntax within IL. For example, the following C# method declaration: [DllImport("mscorsn.dll", SetLastError = true)] [return: MarshalAs(UnmanagedType.U1)] private static extern bool StrongNameSignatureVerificationEx( [MarshalAs(UnmanagedType.LPWStr)] string wszFilePath, [MarshalAs(UnmanagedType.U1)] bool fForceVerification, [MarshalAs(UnmanagedType.U1)] ref bool pfWasVerified); compiles to the following IL definition: .method private static pinvokeimpl("mscorsn.dll" lasterr winapi) bool marshal(unsigned int8) StrongNameSignatureVerificationEx( string marshal(lpwstr) wszFilePath, bool marshal(unsigned int8) fForceVerification, bool& marshal(unsigned int8) pfWasVerified) cil managed preservesig {} As you can see, all the p/invoke and marshal properties are specified directly in IL, rather than using attributes. And, rather than creating entries in CustomAttribute, a whole bunch of metadata is emitted to represent this information. This single method declaration results in the following metadata being output to the assembly: A MethodDef entry containing basic information on the method Four ParamDef entries for the 3 method parameters and return type An entry in ModuleRef to mscorsn.dll An entry in ImplMap linking ModuleRef and MethodDef, along with the name of the function to import and the pinvoke options (lasterr winapi) Four FieldMarshal entries containing the marshal information for each parameter. Phew! Applying attributes Most of the time, when you apply an attribute to an element, an entry in the CustomAttribute table will be created to represent that application. However, some attributes represent concepts in IL that aren't expressible in the language you're coding in, and can instead result in a single bit change (SerializableAttribute and NonSerializedAttribute), or many extra metadata table entries (the p/invoke attributes) being emitted to the output assembly.

  Read the article

• Retrieving Custom Attributes Using Reflection

  - by Scott Dorman

  The .NET Framework allows you to easily add metadata to your classes by using attributes. These attributes can be ones that the .NET Framework already provides, of which there are over 300, or you can create your own. Using reflection, the ways to retrieve the custom attributes of a type are: System.Reflection.MemberInfo public abstract object[] GetCustomAttributes(bool inherit); public abstract object[] GetCustomAttributes(Type attributeType, bool inherit); public abstract bool IsDefined(Type attributeType, bool inherit); System.Attribute public static Attribute[] GetCustomAttributes(MemberInfo member, bool inherit); public static bool IsDefined(MemberInfo element, Type attributeType, bool inherit); If you take the following simple class hierarchy: public abstract class BaseClass { private bool result;   [DefaultValue(false)] public virtual bool SimpleProperty { get { return this.result; } set { this.result = value; } } }   public class DerivedClass : BaseClass { public override bool SimpleProperty { get { return true; } set { base.SimpleProperty = value; } } } Given a PropertyInfo object (which is derived from MemberInfo, and represents a propery in reflection), you might expect that these methods would return the same result. Unfortunately, that isn’t the case. The MemberInfo methods strictly reflect the metadata definitions, ignoring the inherit parameter and not searching the inheritance chain when used with a PropertyInfo, EventInfo, or ParameterInfo object. It also returns all custom attribute instances, including those that don’t inherit from System.Attribute. The Attribute methods are closer to the implied behavior of the language (and probably closer to what you would naturally expect). They do respect the inherit parameter for PropertyInfo, EventInfo, and ParameterInfo objects and search the implied inheritance chain defined by the associated methods (in this case, the property accessors). These methods also only return custom attributes that inherit from System.Attribute. This is a fairly subtle difference that can produce very unexpected results if you aren’t careful. For example, to retrieve the custom  attributes defined on SimpleProperty, you could use code similar to this: PropertyInfo info = typeof(DerivedClass).GetProperty("SimpleProperty"); var attributeList1 = info.GetCustomAttributes(typeof(DefaultValueAttribute), true)); var attributeList2 = Attribute.GetCustomAttributes(info, typeof(DefaultValueAttribute), true));   The attributeList1 array will be empty while the attributeList2 array will contain the attribute instance, as expected. Technorati Tags: Reflection,Custom Attributes,PropertyInfo

  Read the article

• Custom NSStatusItem with custom view - Use NSWindow, NSView, custom NSMenuItem?

  - by Luc

  I'm trying to create a LSUIElement app that behaves like Spotlight, CoverSutra and other apps of that type. I managed to create a custom NSStatusItem, which popups up an NSWindow but the problem is that the app that currently has focus will the focus to my custom NSWindow. I've based myself on Matt Gemmell's example (http://mattgemmell.com/2008/03/04/using-maattachedwindow-with-an-nsstatusitem) For example, if you're in Safari and click on the Spotlight icon, the current Safari window does not gray out and keeps focused. When you press ESC in Spotlight, the focus is back to the Safari window. I haven't managed to do this with my custom NSWindow. I have to click back on a window to set focus back to it. So I'd like to know which route to go to achieve this. Is the solution a NSWindow, NSPanel, NSMenu with a custom NSMenuItem?

  Read the article

• Ping "replies" from same computer with 'Destination host unreachable' (no route to other computer)

  - by Srekel

  I've got two computers in a LAN behind a wireless router. One has XP with ip 192.168.1.2 This one has W7 with ip 192.168.1.7 If I try to ping the other one from this computer, I get this: C:\Users\Srekel>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Tracert gives the same result: C:\Users\Srekel>tracert 192.168.1.2 Tracing route to 192.168.1.2 over a maximum of 30 hops 1 Kakburken4 [192.168.1.7] reports: Destination host unreachable. Trace complete. Although I can ping and tracert the router without any problems. I have disabled the firewalls on both computers. The router is set to use DHCP (if that matters). Here is the output from "route". C:\Users\Srekel>route print =========================================================================== Interface List 13...00 25 86 df c6 89 ......TP-LINK Wireless N Adapter 12...e0 cb 4e 26 b9 84 ......Realtek PCIe GBE Family Controller #2 11...e0 cb 4e 26 be 94 ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 14...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.7 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.7 276 192.168.1.7 255.255.255.255 On-link 192.168.1.7 276 192.168.1.255 255.255.255.255 On-link 192.168.1.7 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.7 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.7 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 14 58 ::/0 On-link 1 306 ::1/128 On-link 14 58 2001::/32 On-link 14 306 2001:0:5ef5:73ba:881:20c1:3f57:fef8/128 On-link 14 306 fe80::/64 On-link 14 306 fe80::881:20c1:3f57:fef8/128 On-link 1 306 ff00::/8 On-link 14 306 ff00::/8 On-link =========================================================================== Persistent Routes: None I've set up and debugged a few networks in my life but I'm not really an advanced network user, so I'm not sure what might be wrong. Any ideas? Oh, and pinging this computer from the other computer doesn't work either. EDIT: Adding arp output: C:\Users\Srekel>arp -a Interface: 192.168.1.7 --- 0xd Internet Address Physical Address Type 192.168.1.1 00-1f-33-ef-28-01 dynamic 192.168.1.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Adding ipconfig... C:\Users\Srekel>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : Kakburken4 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TP-LINK Wireless N Adapter Physical Address. . . . . . . . . : 00-25-86-DF-C6-89 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 09 April 2010 23:09:45 Lease Expires . . . . . . . . . . : 10 April 2010 23:09:45 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection 2: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller #2 Physical Address. . . . . . . . . : E0-CB-4E-26-B9-84 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : E0-CB-4E-26-BE-94 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.{74D5C406-894E-4000-8DE7-6AAEBF7C8382}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:73ba:881:20c1:3f57:fef8(Preferred) Link-local IPv6 Address . . . . . : fe80::881:20c1:3f57:fef8%14(Preferred) Default Gateway . . . . . . . . . : :: NetBIOS over Tcpip. . . . . . . . : Disabled

  Read the article

• Based on CheckBox value show the WIX Dialog.

  - by Velu

  I have instakllation i have to show the Dialog based on the checkbox value. I have set the checkbox property as true initially. <Property Id="CHECKBOX_1_PROP" Value="TRUE" /> And show the dialog based on the check box values. If it is true i have to show the Newdoalog_1 if it is false i have to show the Setup dialog INSTALL INSTALL AND CHECKBOX_1_PROP="TRUE" INSTALL INSTALL My Problem is always show the Setup Dialog that is False condition. Pls help on this.

  Read the article

• Routing all Traffic through OpenVPN Tunnel

  - by Filip Ekberg

  I have installed OpenVPN server on Archlinux and am now using OpenVPN GUI on Windows 7, I can talk to other computers connected through the VPN but I have not yet figured out how to route all traffic through the tunnel. How do I do this? I figured I need to do it with route ( cmd command ) but I think i need some pointers here. I've followed the OpenVPN HowTo on the matter but that doesn't work, it simply doesn't push the "force the client to go through this gateway"-option. And changing from OpenVPN to a PPTP / IPSec alternative is not an option at the moment.

  Read the article

• Sync custom AD properties to SharePoint Profile

  - by KunaalKapoor

  Here are some step-by-step instructions regarding configuring SharePoint to sync with custom AD attributes:Add the custom attribute in Active DirectoryThis part will have to be your doing; here is some documentation regarding creating customattributes in AD:http://msdn.microsoft.com/en-us/library/ms675085(VS.85).aspxhttp://technet.microsoft.com/en-us/magazine/2008.05.schema.aspxhttp://blogs.technet.com/b/isingh/archive/2007/02/18/adding-custom-attributes-in-active-directory.aspx2. Open up the miisclient.exe (C:\Program Files\Microsoft Office Servers\14.0\Synchronization Service\UIShell\miisclient.exe)a. This will have to be opened up with the farm admin account3. Click on "Management Agents" in the ribbon4. Right-click the Active Directory Management Agent ("MOSS-<name of sync connection>") and click "Refresh Schema"a. When prompted, enter the credentials for the farm account5. Once complete, close out of miisclient.exe6. Go into Central Admin --> Application Management --> Manage Service Applications --> Go into the User Profile Service Application7. Click on "Manage User Properties"8. Click on "New Property"9. Put in the correct information regarding the attribute that was created10. At the bottom of this page, under the "Source Data Connection" drop down, select the AD synchronization connection you have already configured11. For the "Attribute" drop down, select the new attribute you have created12. For the "Direction" drop down, select "Import"13. Click "OK"14. Run a full synchronization for the user profile service application and the custom property will get synced (as long as the attribute is set in Active Directory for the desired users)

  Read the article

• Creating Custom HTML Helpers in ASP.NET MVC

  - by Shravan

  ASP.NET MVC provides many built-in HTML Helpers.  With help of HTML Helpers we can reduce the amount of typing of HTML tags for creating a HTML page. For example we use Html.TextBox() helper method it generates html input textbox. Write the following code snippet in MVC View: <%=Html.TextBox("txtName",20)%> It generates the following html in output page: <input id="txtName" name="txtName" type="text" value="20" /> List of built-in HTML Helpers provided by ASP.NET MVC. ActionLink() - Links to an action method. BeginForm() - Marks the start of a form and links to the action method that renders the form. CheckBox() - Renders a check box. DropDownList() - Renders a drop-down list. Hidden() - Embeds information in the form that is not rendered for the user to see. ListBox() - Renders a list box. Password() - Renders a text box for entering a password. RadioButton() - Renders a radio button.TextArea() - Renders a text area (multi-line text box). TextBox () - Renders a text box. How to develop our own Custom HTML Helpers? For developing custom HTML helpers the simplest way is to write an extension method for the HtmlHelper class. See the below code, it builds a custom Image HTML Helper for generating image tag. Read The Remaing Blog Post @ http://theshravan.net/blog/creating-custom-html-helpers-in-asp-net-mvc/

  Read the article

• Metacity malfunction preventing custom Gnome session from launching?

  - by QuietThud

  When I try to run Metacity in Ubuntu2D(12.04), I get the following message: alisa@ubuntu:~$ metacity Window manager warning: Screen 0 on display ":2.0" already has a window manager; try using the --replace option to replace the current window manager. I get the same message when running Compiz from the command line in 3D (it opens fine through the GUI (same thing for AWN)). I understand that these should be the default managers for the respective sessions. I'm trying to create a custom Gnome session using the following instructions: unity launcher-free session. Here is what I've put into my .session file: [GNOME Session] Name=Custom Unity2D Session RequiredComponents=gnome-settings-daemon; RequiredProviders=windowmanager;panel; DefaultProvider-windowmanager=metacity DefaultProvider-panel=unity-2d-panel FallbackSession=ubuntu-2d DesktopName=GNOME Since I'm having problems identifying my default, and the code refers to Metacity, I figured this may be relevant to my inability to load the custom session (it shows up on my login screen, but won't launch). I tried specifying Metacity as my default manager by adding exec metacity to the .xinitrc file, and I tried running metacity --replace, but neither worked. How do I determine my current default window manager, what should the default be, and how do I re-assign it? Also, please let me know if you think there may be other issues affecting my custom session. I am new to Linux, so list anything you think might be helpful. Thank you!

  Read the article

• StyleCop Custom Rules

  - by Aligned

  There are several blogs on how to do this (http://scottwhite.blogspot.com/2008/11/creating-custom-stylecop-rules-in-c.html, etc). I’ve found a few useful things to point out: Debugging is difficult, but here are the steps (thanks to Tintin’s answer). “One way: 1) Delete your custom rules 2) Open Visual Studio (for dev), open your custom rule solution 3) Build & Deploy custom rules (a PostBuild action to copy the rules into the StyleCop folder is handy) 4) Open Visual Studio (for test) 5) Use VS (dev) and Attach to process devenv.exe (the test VS instance), set breakpoints in the rules you want to debug 6) Use VS’ (test) and right-click on project, Run StyleCop 7) Debug” ~ it worked once, now I’m having problems getting it to work again ~ I also get the message “Cannot evaluate expression because the code of the current method is optimized.” when I try to look at properties. Looking at the source code of the StyleCop.CSharp.Rules.dll that comes with the install. I used JustDecompile from Telerik. Create one xml file and name it the same as the one cs file (CodingGuildelineRules.cs and CodingGuidelinRules.xml) Deploy: 1. Build in Visual Studio 2. Close Visual Studio (Style cop is running so you can’t override your dll without closing) 3. Copy the dll from the bin to the C: \Program Files (x86)\StyleCop 4.7\ 4. Open the settings file or re-open Visual Studio

  Read the article

• YouTube custom thumbnails feature availability

  - by skat

  I've been trying to figure out this on my own for weeks, but now I give up. 'Custom thumbnails' feature on YouTube is such a controversial one, it was changed so much... so much that even FAQ on YouTube doesn't fully describe it's features (as I see). I have a YouTube channel for one of my websites. This YouTube channel is main marketing force for my website - it brings all the boys to my yard (I mean, website). So I have to use all the hacky-tricky stuff to increase my visibility on youtube. And damn, those custom thumbnails are giving me hard times... As far as I understand, this is current state of 'custom thumbnail' feature: "If your account is in good standing, you may have the ability to upload custom thumbnails for your video uploads." (c) https://support.google.com/youtube/answer/138008 My channel has good standing, has more than 50000 views. So why the hell my account is still not eligible for this feature? anyone have any idea?

  Read the article

• Static route toward a DNS Address, it is possible ?

  - by aleroot

  I need to add a static route on a windows server toward a web server with a service, i need to add a static route with this command on windows command prompt : ROUTE ADD -p IPADREESS GATEWAYIP Is there a way to do a static route toward a DNS address instead of a IP Address ? How ? For example : ROUTE ADD -p DNSServer GATEWAYIP

  Read the article

• Google Public DNS is not used in trace route

  - by IT researcher

  In my PC i am using google public DNS as DNS server.In Internet protocol(TCP/IP) properties i have set Preferred DNS server as 8 8 4 4 and Alternate DNS server as 8 8 8 8. According to me this DNS server should be used to resolve any request to website to its IP by using this DNS servers.(see google DNS and How Domain Name Servers Work). But when i checked trace route to a website in my PC i got following Tracing route to www.google.com [74.125.236.80] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.1.201 2 360 ms 349 ms 292 ms 122.178.216.1 3 145 ms 107 ms 148 ms 122.166.32.121 4 32 ms 53 ms 120 ms 122.166.32.9 5 45 ms 42 ms 121 ms 122.175.255.29 6 63 ms 76 ms 51 ms 182.79.255.45 7 52 ms 134 ms 61 ms 72.14.194.22 8 86 ms 59 ms 72 ms 72.14.232.202 9 106 ms 107 ms 60 ms 66.249.94.39 10 101 ms 103 ms 117 ms 209.85.249.235 11 148 ms 224 ms 276 ms 74.125.236.80 Trace complete. When i checked all these IP in who.is i found that it is of my ISP. So my question is where does Google public DNS is used? Also how come my ISP's nameserver is used even if i set google public dns as my dns server in my PC?(OR does my any settings are wrong)

  Read the article

• Managing Many External Hosts Using EC2 and Route 53

  - by futureal

  Looking for a "best practice" answer to managing externally-addressable hosts using the combination of Amazon EC2 and Amazon Route 53, without using Elastic IPs for each host. In my scenario I will have 30+ hosts that need to be accessible from outside EC2, so directly using internal DNS will not work. In the past, I have addressed hosts by assigning an elastic IP to that host (let's say, 55.55.55.55) and then creating an associated A record. For example, let's say I want to create "ec2-corp01.mydomain.com" I might do: ec2-corp01.mydomain.com. A 55.55.55.55 300 Then on that EC2 instance, I would assign the Elastic IP of 55.55.55.55, and everything works fine. Of course, to make this work, I need to have one Elastic IP per instance, which is something I'd like to avoid if possible; I'd like the infrastructure to be more dynamic. So my thought is to try something like: Create a script that queries the internal EC2 tools to determine an instance's private hostname On instance boot, call that script to determine its hostname, and then using the command-line Route 53 interface to find and update that hostname to its current internal hostname Since the host will have a relatively low TTL (let's say 300 as above, or 5 minutes) it should take effect pretty quickly Is this a good idea? Is there a better or more widely accepted way to handle it? If it IS a good idea, what type of record should I be creating? A CNAME that points to the internal host, like ec2-55-55-55-55.compute-1.amazonaws.com? Is an A record better or worse? Thanks!

  Read the article

• How do I get the member to which my custom attribute was applied?

  - by Sarah Vessels

  I'm creating a custom attribute in C# and I want to do different things based on whether the attribute is applied to a method versus a property. At first I was going to do new StackTrace().GetFrame(1).GetMethod() in my custom attribute constructor to see what method called the attribute constructor, but now I'm unsure what that will give me. What if the attribute was applied to a property? Would GetMethod() return a MethodBase instance for that property? Is there a different way of getting the member to which an attribute was applied in C#? [AttributeUsage(AttributeTargets.Method | AttributeTargets.Property, AllowMultiple = true)] public class MyCustomAttribute : Attribute Update: okay, I might have been asking the wrong question. From within a custom attribute class, how do I get the member (or the class containing the member) to which my custom attribute was applied? Aaronaught suggested against walking up the stack to find the class member to which my attribute was applied, but how else would I get this information from within the constructor of my attribute?

  Read the article

• Cisco ASA: How to route PPPoE-assigned subnet?

  - by Martijn Heemels

  We've just received a fiber uplink, and I'm trying to configure our Cisco ASA 5505 to properly use it. The provider requires us to connect via PPPoE, and I managed to configure the ASA as a PPPoE client and establish a connection. The ASA is assigned an IP address by PPPoE, and I can ping out from the ASA to the internet, but I should have access to an entire /28 subnet. I can't figure out how to get that subnet configured on the ASA, so that I can route or NAT the available public addresses to various internal hosts. My assigned range is: 188.xx.xx.176/28 The address I get via PPPoE is 188.xx.xx.177/32, which according to our provider is our Default Gateway address. They claim the subnet is correctly routed to us on their side. How does the ASA know which range it is responsible for on the Fiber interface? How do I use the addresses from my range? To clarify my config; The ASA is currently configured to default-route to our ADSL uplink on port Ethernet0/0 (interface vlan2, nicknamed Outside). The fiber is connected to port Ethernet0/2 (interface vlan50, nicknamed Fiber) so I can configure and test it before making it the default route. Once I'm clear on how to set it all up, I'll fully replace the Outside interface with Fiber. My config (rather long): : Saved : ASA Version 8.3(2)4 ! hostname gw domain-name example.com enable password ****** encrypted passwd ****** encrypted names name 10.10.1.0 Inside-dhcp-network description Desktops and clients that receive their IP via DHCP name 10.10.0.208 svn.example.com description Subversion server name 10.10.0.205 marvin.example.com description LAMP development server name 10.10.0.206 dns.example.com description DNS, DHCP, NTP ! interface Vlan2 description Old ADSL WAN connection nameif outside security-level 0 ip address 192.168.1.2 255.255.255.252 ! interface Vlan10 description LAN vlan 10 Regular LAN traffic nameif inside security-level 100 ip address 10.10.0.254 255.255.0.0 ! interface Vlan11 description LAN vlan 11 Lab/test traffic nameif lab security-level 90 ip address 10.11.0.254 255.255.0.0 ! interface Vlan20 description LAN vlan 20 ISCSI traffic nameif iscsi security-level 100 ip address 10.20.0.254 255.255.0.0 ! interface Vlan30 description LAN vlan 30 DMZ traffic nameif dmz security-level 50 ip address 10.30.0.254 255.255.0.0 ! interface Vlan40 description LAN vlan 40 Guests access to the internet nameif guests security-level 50 ip address 10.40.0.254 255.255.0.0 ! interface Vlan50 description New WAN Corporate Internet over fiber nameif fiber security-level 0 pppoe client vpdn group KPN ip address pppoe ! interface Ethernet0/0 switchport access vlan 2 speed 100 duplex full ! interface Ethernet0/1 switchport trunk allowed vlan 10,11,30,40 switchport trunk native vlan 10 switchport mode trunk ! interface Ethernet0/2 switchport access vlan 50 speed 100 duplex full ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 switchport access vlan 20 ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! boot system disk0:/asa832-4-k8.bin ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server dns.example.com domain-name example.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-net subnet 10.10.0.0 255.255.0.0 object network svn.example.com host 10.10.0.208 object network marvin.example.com host 10.10.0.205 object network lab-net subnet 10.11.0.0 255.255.0.0 object network dmz-net subnet 10.30.0.0 255.255.0.0 object network guests-net subnet 10.40.0.0 255.255.0.0 object network dhcp-subnet subnet 10.10.1.0 255.255.255.0 description DHCP assigned addresses on Vlan 10 object network Inside-vpnpool description Pool of assignable addresses for VPN clients object network vpn-subnet subnet 10.10.3.0 255.255.255.0 description Address pool assignable to VPN clients object network dns.example.com host 10.10.0.206 description DNS, DHCP, NTP object-group service iscsi tcp description iscsi storage traffic port-object eq 3260 access-list outside_access_in remark Allow access from outside to HTTP on svn. access-list outside_access_in extended permit tcp any object svn.example.com eq www access-list Insiders!_splitTunnelAcl standard permit 10.10.0.0 255.255.0.0 access-list iscsi_access_in remark Prevent disruption of iscsi traffic from outside the iscsi vlan. access-list iscsi_access_in extended deny tcp any interface iscsi object-group iscsi log warnings ! snmp-map DenyV1 deny version 1 ! pager lines 24 logging enable logging timestamp logging asdm-buffer-size 512 logging monitor warnings logging buffered warnings logging history critical logging asdm errors logging flash-bufferwrap logging flash-minimum-free 4000 logging flash-maximum-allocation 2000 mtu outside 1500 mtu inside 1500 mtu lab 1500 mtu iscsi 9000 mtu dmz 1500 mtu guests 1500 mtu fiber 1492 ip local pool DHCP_VPN 10.10.3.1-10.10.3.20 mask 255.255.0.0 ip verify reverse-path interface outside no failover icmp unreachable rate-limit 10 burst-size 5 asdm image disk0:/asdm-635.bin asdm history enable arp timeout 14400 nat (inside,outside) source static any any destination static vpn-subnet vpn-subnet ! object network inside-net nat (inside,outside) dynamic interface object network svn.example.com nat (inside,outside) static interface service tcp www www object network lab-net nat (lab,outside) dynamic interface object network dmz-net nat (dmz,outside) dynamic interface object network guests-net nat (guests,outside) dynamic interface access-group outside_access_in in interface outside access-group iscsi_access_in in interface iscsi route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server SBS2003 protocol radius aaa-server SBS2003 (inside) host 10.10.0.204 timeout 5 key ***** aaa authentication enable console SBS2003 LOCAL aaa authentication ssh console SBS2003 LOCAL aaa authentication telnet console SBS2003 LOCAL http server enable http 10.10.0.0 255.255.0.0 inside snmp-server host inside 10.10.0.207 community ***** version 2c snmp-server location Server room snmp-server contact [email protected] snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart snmp-server enable traps syslog crypto ipsec transform-set TRANS_ESP_AES-256_SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set TRANS_ESP_AES-256_SHA mode transport crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group5 crypto dynamic-map outside_dyn_map 20 set transform-set TRANS_ESP_AES-256_SHA crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet 10.10.0.0 255.255.0.0 inside telnet timeout 5 ssh scopy enable ssh 10.10.0.0 255.255.0.0 inside ssh timeout 5 ssh version 2 console timeout 30 management-access inside vpdn group KPN request dialout pppoe vpdn group KPN localname INSIDERS vpdn group KPN ppp authentication pap vpdn username INSIDERS password ***** store-local dhcpd address 10.40.1.0-10.40.1.100 guests dhcpd dns 8.8.8.8 8.8.4.4 interface guests dhcpd update dns interface guests dhcpd enable guests ! threat-detection basic-threat threat-detection scanning-threat threat-detection statistics host number-of-rate 2 threat-detection statistics port number-of-rate 3 threat-detection statistics protocol number-of-rate 3 threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server dns.example.com source inside prefer webvpn group-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec group-policy Insiders! internal group-policy Insiders! attributes wins-server value 10.10.0.205 dns-server value 10.10.0.206 vpn-tunnel-protocol IPSec l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value Insiders!_splitTunnelAcl default-domain value example.com username martijn password ****** encrypted privilege 15 username marcel password ****** encrypted privilege 15 tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group Insiders! type remote-access tunnel-group Insiders! general-attributes address-pool DHCP_VPN authentication-server-group SBS2003 LOCAL default-group-policy Insiders! tunnel-group Insiders! ipsec-attributes pre-shared-key ***** ! class-map global-class match default-inspection-traffic class-map type inspect http match-all asdm_medium_security_methods match not request method head match not request method post match not request method get ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map type inspect http http_inspection_policy parameters protocol-violation action drop-connection policy-map global-policy class global-class inspect dns inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect icmp inspect icmp error inspect mgcp inspect netbios inspect pptp inspect rtsp inspect snmp DenyV1 ! service-policy global-policy global smtp-server 123.123.123.123 prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily hpm topN enable Cryptochecksum:a76bbcf8b19019771c6d3eeecb95c1ca : end asdm image disk0:/asdm-635.bin asdm location svn.example.com 255.255.255.255 inside asdm location marvin.example.com 255.255.255.255 inside asdm location dns.example.com 255.255.255.255 inside asdm history enable

  Read the article

• How do I set the next available custom color in the ColorDialog?

  - by Hannah

  I'm currently coding in VB.net. A user places the cursor in a table cell and clicks on "Table Background Color" to edit the current background colour. Currently I have been able to detect the current colour (for instance a light blue) and set that colour in the ColorDialog (Colour swatches are correct and RGB values are correct). What I would like to do is enable the user to click on the "Add to Custom Colors" to save the colour. Problem is, it sets the first square in the custom colours area (which happens to already be filled in with another custom colour), rather than finding the next square that is white and set it there instead. Is this possible? If the user selects a new custom colour square when they first load the ColorDialog, the current colour (light blue) disappears and the colour swatches and RGB values are set as white. Thanks

  Read the article

• Add static route through DHCP

  - by MathieuK

  I'm trying to get an OSX Lion Server to provide a static route to its clients (all OSX Lion) over DHCP. I can't get the client to actually apply the static route. So far, I've managed to get the DHCP server (BOOTPD) to actually serve the DHCP OPTION 33 (static_route) on the DHCP offers by editing /etc/bootpd.plist and adding something like: <key>dhcp_option_33</key> <data>[some base64 goes here]</data> .. and restarting the DHCP service. On the client I've managed to get the client to actually request the dhcp option by modifying and adding option 33 to the DHCPRequestedParameterList key: <key>DHCPRequestedParameterList</key> <array> ... keys snipped for brevity ... <integer>33</integer> </array> .. and rebooting the client. This makes the client request the static_route option from the DHCP server ( i can see the proper output in ipconfig getpacket en0 ) but it doesn't actually apply the rule. Has anyone ever succeeded in applying static_route options on OSX clients through DHCP?

  Read the article

• Custom activity designers in Workflow Foundation 3.5: How do they work?

  - by stakx

  Intent of this post: I realise that Workflow Foundation is not extremely popular on StackOverflow and that there will probably be not many answers, or none at all. This post is intended as a resource to people trying to customise workflow activities' appearance through custom designer classes. Goals: I am attempting to create a custom designer class for Workflow activities to achieve the following: Make activities look less technical. For example, I don't necessarily want to see the internal object name as the activity's "title" -- instead, I'd like to see something more descriptive. Display the values of certain properties beneath the title text. I would like to see some properties' values directly underneath the title so that I don't need to look somewhere else (namely, at the Properties window). Provide custom drop areas and draw custom internal arrows. As an example, I would like to be able to have custom drop areas in very specific places. What I found out so far: I created a custom designer class deriving from SequentialActivityDesigner as follows: [Designer(typeof(SomeDesigner))] public partial class SomeActivity: CompositeActivity { ... } class PlainDesigner : SequentialActivityDesigner { ... } Through overriding some properties and the OnPaint method, I found out about the following correspondences between the properties and how the activity will be displayed: Figure 1. Relationship between some properties of an SequentialActivityDesigner and the displayed activity. Possible solutions for goal #1 (make activities look less technical) and goal #2 (display values of properties beneath title text): The displayed title can be changed through the Title property. If more room is required to display additional information beneath the title, the TitleHeight property can be increased (ie., override the property and make it return base.TitleHeight + n, where n is some positive integer). Override the OnPaint method and draw additional text in the area reserved through TitleHeight. Open questions: What are the connectors, connections, and connection points used for? They seem to be necessary, but for what purpose? While the drop targets can be got through the GetDropTargets method, it seems that this is not necessarily where the designer will actually place dropped activities. When an activity is dragged across a workflow, the designer displays little green plus signs where activities can be dropped; how does it figure out the locations of these plus signs? How does the designer figure out where to draw connector lines and arrows?

  Read the article

• Route web traffic through a separate iterface

  - by tkane

  I'd like to route web traffic through the wlan0 interface and the rest through eth1. Can you please help me with the iptables commands to achieve this. Below is my configuration. Thank you :) Edit: This is about desktop configuration not a web server set up. Basically I want to use one of my connections to browse the web and the other one for everything else. ifconfig: eth1 Link encap:Ethernet HWaddr 00:1d:09:59:80:70 inet addr:192.168.2.164 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::21d:9ff:fe59:8070/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:33 errors:0 dropped:0 overruns:0 frame:0 TX packets:41 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4771 (4.7 KB) TX bytes:7081 (7.0 KB) Interrupt:17 wlan0 Link encap:Ethernet HWaddr 00:1c:bf:90:8a:6d inet addr:192.168.1.70 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21c:bfff:fe90:8a6d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:77 errors:0 dropped:0 overruns:0 frame:0 TX packets:102 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14256 (14.2 KB) TX bytes:14764 (14.7 KB) route: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.2.0 * 255.255.255.0 U 1 0 0 eth1 192.168.1.0 * 255.255.255.0 U 2 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 default adsl 0.0.0.0 UG 0 0 0 eth1

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >