Search Results

Search found 29093 results on 1164 pages for 'network interface'.

Page 240/1164 | < Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >

• How do I configure an interface to have *both* a DHCP address and a static address in Ubuntu?

  - by Paul Hoffman

  In a lab setup, I want eth0 on a Ubuntu server box to get a DHCP address for talking to the outside world, and I also want to assign it a static 10.x.y.z address for talking to other boxes on the local network that have 10.x.y.z addresses. I want to do this by editing /etc/network/interfaces. The man page for /etc/network/interfaces is modeled after "here's a bunch of examples, I hope you can figure out the actual rules on your own". I don't see a way to give one interface two addresses using two different methods (static and dhcp), and initial fumbling didn't produce useful results.

  Read the article

• How to make ssh/rsync/etc use a VLAN network interface?

  - by Annan

  A company I work for has a number of virtual servers with ElasticHosts. They are setup in such a way that eth1 is on a private VLAN connecting them to each other. This is so backups sent between servers are not charged at the same rate as external data transfer. My understanding of how VLANs and network interfaces work is sketchy at best. How can I make ssh, rsync, etc. transfer data through the VLAN? My final solution: I spent a while trying to figure this out, For all servers involved, edit /etc/sysconfig/network-scripts/ifcfg-eth1 DEVICE=eth1 BOOTPROTO=static ONBOOT=yes HWADDR=YOUR_MAC_ADDR IPADDR=192.168.0.100 NETMASK=255.255.255.0 Where HWADDR should already be set and the last octate of IPADDR should be different from each other. Then run, on all servers /etc/init.d/network restart After this the IP addresses specified by IPADDR can be used directly as any other IP address.

  Read the article

• How can I disable internet for a specific interface in Windows 7?

  - by MGSoto

  I have two NICs on my machine, one which connects to my network and has my internet connection. The other connects to a buddy next doors network with his internet connection. I don't want Windows magically deciding which internet connection to use, I want it to use mine. I've had some success by blanking out DNS servers for his connection, but then I also lose hostname resolution on his network and I realize this doesn't solve everything 100%. How can I force Windows to use only my connection while avoiding the use of a router?

  Read the article

• Can a network interface be configured to have a default gateway for UDP packets?

  - by Vaibhav

  It is quite possible that my question may not make a lot of sense. I apologize, but I am not a networking guy, and that's my excuse. To elaborate, WikiPedia defines "Default Gateway" as a node on a "TCP/IP" network. And the way it works is that if a network interface is sending a packet to an IP address not present on its subnet, it sends it out to the default gateway (which then knows what to do with that packet). Is this true if a UDP packet (datagram) is involved? I mean, if my network interface is sending a UDP packet to an IP address that is not present on its subnet, would it automatically send it to the Default Gateway as well?

  Read the article

• What is the correct UI interface to learn for creating Windows phone 8 apps? [closed]

  - by Robert Oschler

  I am a veteran Delphi 6 programmer transitioning to C# development. My first project is a open source library that will have a minimal user interface since it is meant to be used as a Component primarily on desktop PCs running Visual Studio. My next project is going to be a Windows 8 phone app and I intend for that platform to be my primary focus for future C# development, not the desktop. My concern is that I waste as little time as possible learning a presentation framework that will benefit or distract me from writing Windows 8 phone apps. The plethora of framework names I have already encountered include, WinForms, WPF (Windows Presentation Framework), Silverlight, Silverlight Mobile, Metro and there may be others. Given my goal outlined in the first paragraph above, I have a few questions: 1) Which of the frameworks should I use for the small amount of UI work I will do with the desktop Component project that will help me the most, or hurt me the least, when I move to Windows 8 phone app development? 2) Which is the correct framework to study for developing Windows 8 phone apps? 3) Any awesome tutorials, resources or books you have run into targeted towards veteran programmers from other platforms? I read about the Portable Library Tools on this Stack Overflow thread: http://stackoverflow.com/questions/5522355/windows-phone-7-wpf-sharing-a-codebase But the reply by Simon Guindon seemed to indicate to me that it's not the best solution for writing a competitive Windows 8 phone app.

  Read the article

• What is the rationale behind Apache Jena's *everything is an interface if possible* design philosophy?

  - by David Cowden

  If you are familiar with the Java RDF and OWL engine Jena, then you have run across their philosophy that everything should be specified as an interface when possible. This means that a Resource, Statement, RDFNode, Property, and even the RDF Model, etc., are, contrary to what you might first think, Interfaces instead of concrete classes. This leads to the use of Factories quite often. Since you can't instantiate a Property or Model, you must have something else do it for you --the Factory design pattern. My question, then, is, what is the reasoning behind using this pattern as opposed to a traditional class hierarchy system? It is often perfectly viable to use either one. For example, if I want a memory backed Model instead of a database-backed Model I could just instantiate those classes, I don't need ask a Factory to give me one. As an aside, I'm in the process of writing a library for manipulating Pearltrees data, which is exported from their website in the form of an RDF/XML document. As I write this library, I have many options for defining the relationships present in the Peartrees data. What is nice about the Pearltrees data is that it has a very logical class system: A tree is made up of pearls, which can be either Page, Reference, Alias, or Root pearls. My question comes from trying to figure out if I should adopt the Jena philosophy in my library which uses Jena, or if I should disregard it, pick my own design philosophy, and stick with it.

  Read the article

• Can I assume interface oriented programming as a good object oriented programming?

  - by david

  I have been programming for decades but I have not been used to object oriented programming. But for recenet years, I had a great opportunity to learn OOP, its principles, and a lot of patterns that are great. Since I've learned OOP, I tried to apply them to a couple of projects and found those projects successful. Unfortunately I didn't follow extreme programming that suggests writing test first, mainly because their time frame were tight. What I did for those projects were Identify all necessary classes and create them with proper properties and methods whenever there is dependency between classes, write interface between them see if there is any patterns for certain relationships between classes to replace By successful, I meant that it was quick development effort, the classes can be reused better, and flexible enough so that another programmer does not have to change something else to fix another part. But I wonder if this is a good practice. Of course, I know I need to put writing unit tests first in my work process. But other than that, is there any problem with this approach - creating lots of interfaces - in long term?

  Read the article

• A better alternative to incompatible implementations for the same interface?

  - by glenatron

  I am working on a piece of code which performs a set task in several parallel environments where the behaviour of the different components in the task are similar but quite different. This means that my implementations are quite different but they are all based on the relationships between the same interfaces, something like this: IDataReader -> ContinuousDataReader -> ChunkedDataReader IDataProcessor -> ContinuousDataProcessor -> ChunkedDataProcessor IDataWriter -> ContinuousDataWriter -> ChunkedDataWriter So that in either environment we have an IDataReader, IDataProcessor and IDataWriter and then we can use Dependency Injection to ensure that we have the correct one of each for the current environment, so if we are working with data in chunks we use the ChunkedDataReader, ChunkedDataProcessor and ChunkedDataWriter and if we have continuous data we have the continuous versions. However the behaviour of these classes is quite different internally and one could certainly not go from a ContinuousDataReader to the ChunkedDataReader even though they are both IDataProcessors. This feels to me as though it is incorrect ( possibly an LSP violation? ) and certainly not a theoretically correct way of working. It is almost as though the "real" interface here is the combination of all three classes. Unfortunately in the project I am working on with the deadlines we are working to, we're pretty much stuck with this design, but if we had a little more elbow room, what would be a better design approach in this kind of scenario?

  Read the article

• Lost access to the unity interface how to fix? (ubuntu 11.10)

  - by Tal Galili

  o.k, this is embarrassing: I have installed Compiz Config Settings Manager and tried to fix it so that the transition time between changing tabs (using alt+tab) will be short. by accident I un-pressed V from something else, and it asked me about a conflict - I pressed the "x" button to close the window and as a result I stopped seeing the unity interface. That is - I can not see any buttons of the left side. I went to the terminal (ctrl+alt+F1) and ran ccsm As a result I got the following error: $ ccsm /usr/lib/python2.7/site-packages/gtk-2.0/gtk/__init__.py:57: GtkWarning: could not open display warnings.warn(str(e), _gtk.Warning) Traceback (most recent call last): File "/usr/bin/ccsm", line 93, in <module> import ccm File "/usr/lib/python2.7/site-packages/ccm/__init__.py", line 1, in <module> from ccm.Conflicts import * File "/usr/lib/python2.7/site-packages/ccm/Conflicts.py", line 26, in <module> from ccm.Constants import * File "/usr/lib/python2.7/site-packages/ccm/Constants.py", line 29, in <module> CurrentScreenNum = gtk.gdk.display_get_default().get_default_screen().get_number() AttributeError: 'NoneType' object has no attribute 'get_default_screen' What should I do next? Thanks.

  Read the article

• Creating static NAT blocks outbound traffic Cisco ASA

  - by natediggs

  Hi Everyone, I have two web servers sitting behind a Cisco ASA 5505, which I don't have much experience with. I'm trying to create two static NATs. One static NAT that goes to xx.xx.xx.150 and another that goes to xx.xx.xx.151. I've created the static NAT for the .150 web server and it works FINE. Incoming and outgoing traffic work great. This is the staging web server. I now need to duplicate the setup for the production web server. So, I connect the webserver to the firewall, change the public IP address on one of the NICs reboot the server and I have outbound internet access. Then I run the command: static (inside,outside) xx.xx.xx.150 192.168.1.x which is successful. I then run the command: access-list acl-outside permit tcp any host xx.xx.xx.150 eq 80 Which is successful. I then try to browse the internet and I get nothing. I try to telnet in through port 80 and I get nothing (though I'm guessing because the response to the telnet request is being blocked). I've tried this with the production web server and then I tried it with another web server that is for internal testing and have the exact same problem. Both work fine until I run the static NAT rule and then no outbound internet access. I have a feeling that it's something simple that I'm missing, but my limited experience with this device is killing me. Below I've pasted the current configuration. I'm currently trying to get this to work on the .153 server which is the internal testing server. Once I can verify that works, I'll try it with production. : Saved : ASA Version 8.2(4) ! hostname QG domain-name XX.com enable password passwd names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address XX.XX.XX.148 255.255.255.0 ! interface Vlan3 shutdown no forward interface Vlan1 nameif dmz security-level 50 ip address dhcp ! boot system disk0:/asa824.bin ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name fw.XXgroup.com same-security-traffic permit inter-interface access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.153 eq www access-list inside_access_in extended permit ip 192.168.1.0 255.255.255.0 any access-list inside_nat0_outbound extended permit ip any 192.168.1.32 255.255.255.240 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 ip local pool VPNIPs 192.168.1.35-192.168.1.44 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-635.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) XX.XX.XX150 192.168.1.100 netmask 255.255.255.255 static (inside,outside) XX.XX.XX153 192.168.1.102 netmask 255.255.255.255 access-group acl-outside in interface outside route outside 0.0.0.0 0.0.0.0 XX.XX.XX129 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authorization command LOCAL http server enable http 192.168.1.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group1 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication crack encryption 3des hash sha group 2 lifetime 86400 no crypto isakmp nat-traversal client-update enable telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd dns 208.77.88.4 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn enable outside svc image disk0:/sslclient-win-1.1.0.154.pkg 1 svc image disk0:/anyconnect-win-2.5.2019-k9.pkg 2 svc enable group-policy ATSAdmin internal group-policy ATSAdmin attributes dns-server value 208.77.88.4 208.85.174.9 vpn-tunnel-protocol IPSec svc webvpn webvpn url-list none svc keep-installer installed svc rekey method ssl svc ask enable username qgadmin password /oHfeGQ/R.bd3KPR encrypted privilege 15 username benl password 0HNIGQNI0uruJvhW encrypted privilege 0 username benl attributes vpn-group-policy ATSAdmin username kuzma password rH7MM7laoynyvf9U encrypted privilege 0 username kuzma attributes vpn-group-policy ATSAdmin username nate password BXHOURyT37e4O5mt encrypted privilege 0 username nate attributes vpn-group-policy ATSAdmin tunnel-group ATSAdmin type remote-access tunnel-group ATSAdmin general-attributes address-pool VPNIPs default-group-policy ATSAdmin tunnel-group SSLVPN type remote-access tunnel-group SSLVPN general-attributes address-pool VPNIPs default-group-policy ATSAdmin ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global privilege cmd level 3 mode exec command perfmon privilege cmd level 3 mode exec command ping privilege cmd level 3 mode exec command who privilege cmd level 3 mode exec command logging privilege cmd level 3 mode exec command failover privilege show level 5 mode exec command running-config privilege show level 3 mode exec command reload privilege show level 3 mode exec command mode privilege show level 3 mode exec command firewall privilege show level 3 mode exec command interface privilege show level 3 mode exec command clock privilege show level 3 mode exec command dns-hosts privilege show level 3 mode exec command access-list privilege show level 3 mode exec command logging privilege show level 3 mode exec command ip privilege show level 3 mode exec command failover privilege show level 3 mode exec command asdm privilege show level 3 mode exec command arp privilege show level 3 mode exec command route privilege show level 3 mode exec command ospf privilege show level 3 mode exec command aaa-server privilege show level 3 mode exec command aaa privilege show level 3 mode exec command crypto privilege show level 3 mode exec command vpn-sessiondb privilege show level 3 mode exec command ssh privilege show level 3 mode exec command dhcpd privilege show level 3 mode exec command vpn privilege show level 3 mode exec command blocks privilege show level 3 mode exec command uauth privilege show level 3 mode configure command interface privilege show level 3 mode configure command clock privilege show level 3 mode configure command access-list privilege show level 3 mode configure command logging privilege show level 3 mode configure command ip privilege show level 3 mode configure command failover privilege show level 5 mode configure command asdm privilege show level 3 mode configure command arp privilege show level 3 mode configure command route privilege show level 3 mode configure command aaa-server privilege show level 3 mode configure command aaa privilege show level 3 mode configure command crypto privilege show level 3 mode configure command ssh privilege show level 3 mode configure command dhcpd privilege show level 5 mode configure command privilege privilege clear level 3 mode exec command dns-hosts privilege clear level 3 mode exec command logging privilege clear level 3 mode exec command arp privilege clear level 3 mode exec command aaa-server privilege clear level 3 mode exec command crypto privilege cmd level 3 mode configure command failover privilege clear level 3 mode configure command logging privilege clear level 3 mode configure command arp privilege clear level 3 mode configure command crypto privilege clear level 3 mode configure command aaa-server prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:0ed0580e151af288d865f4f3603d792a : end asdm image disk0:/asdm-635.bin no asdm history enable

  Read the article

• Why does my ping command (Windows) results alternate between "timeout" and "network is not reachable"?

  - by Sopalajo de Arrierez

  My Windows is in Spanish, so I will have to paste console outputs in that language (I think that translating without knowing the exact terms used in english versions could give worse results than leaving it as it appears on screen). This is the issue: when pinging a non-existent IP from a WinXP-SP3 machine (clean Windows install, just formatted), I get sometimes a "Timeout" result, and sometimes a "network is not reachable" message. This is the result of: ping 192.168.210.1 Haciendo ping a 192.168.210.1 con 32 bytes de datos: Tiempo de espera agotado para esta solicitud. Respuesta desde 80.58.67.86: Red de destino inaccesible. Respuesta desde 80.58.67.86: Red de destino inaccesible. Tiempo de espera agotado para esta solicitud. Estadísticas de ping para 192.168.210.1: Paquetes: enviados = 4, recibidos = 2, perdidos = 2 (50% perdidos), Tiempos aproximados de ida y vuelta en milisegundos: Mínimo = 0ms, Máximo = 0ms, Media = 0ms 192.168.210.1 does not exist on the network. DHCP client is enabled, and the computer gets assigned those network config by the router. My IP: 192.168.11.2 Netmask: 255.255.255.0 Gateway: 192.168.11.1 DNS: 80.58.0.33/194.224.52.36 This is the output from "route print command": =========================================================================== Rutas activas: Destino de red Máscara de red Puerta de acceso Interfaz Métrica 0.0.0.0 0.0.0.0 192.168.11.1 192.168.11.2 20 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.11.0 255.255.255.0 192.168.11.2 192.168.11.2 20 192.168.11.2 255.255.255.255 127.0.0.1 127.0.0.1 20 192.168.11.255 255.255.255.255 192.168.11.2 192.168.11.2 20 224.0.0.0 240.0.0.0 192.168.11.2 192.168.11.2 20 255.255.255.255 255.255.255.255 192.168.11.2 192.168.11.2 1 255.255.255.255 255.255.255.255 192.168.11.2 3 1 Puerta de enlace predeterminada: 192.168.11.1 =========================================================================== Rutas persistentes: ninguno The output of: ping 1.1.1.1 Haciendo ping a 1.1.1.1 con 32 bytes de datos: Tiempo de espera agotado para esta solicitud. Tiempo de espera agotado para esta solicitud. Tiempo de espera agotado para esta solicitud. Tiempo de espera agotado para esta solicitud. Estadísticas de ping para 1.1.1.1: Paquetes: enviados = 4, recibidos = 0, perdidos = 4 1.1.1.1 does not exist on the network. and the output of: ping 10.1.1.1 Haciendo ping a 10.1.1.1 con 32 bytes de datos: Respuesta desde 80.58.67.86: Red de destino inaccesible. Tiempo de espera agotado para esta solicitud. Tiempo de espera agotado para esta solicitud. Respuesta desde 80.58.67.86: Red de destino inaccesible. Estadísticas de ping para 10.1.1.1: Paquetes: enviados = 4, recibidos = 2, perdidos = 2 (50% perdidos), 10.1.1.1 does not exist on the network. I can do some aproximate translation of what you demand if necessary. I have another computers in the same network (WinXP-SP3 and Win7-SP1), and they have, too, this problem. Gateway (Router): Buffalo WHR-HP-GN (official Buffalo firmware, not DD-WRT). I have some Linux (Debian/Kali) machine in my network, so I tested things on it: ping 192.168.210.1 PING 192.168.210.1 (192.168.210.1) 56(84) bytes of data. From 80.58.67.86 icmp_seq=1 Packet filtered From 80.58.67.86 icmp_seq=2 Packet filtered From 80.58.67.86 icmp_seq=3 Packet filtered From 80.58.67.86 icmp_seq=4 Packet filtered to the non-existing 1.1.1.1 : ping 1.1.1.1 PING 1.1.1.1 (1.1.1.1) 56(84) bytes of data. ^C --- 1.1.1.1 ping statistics --- 153 packets transmitted, 0 received, 100% packet loss, time 153215ms (no response after waiting a few minutes). and the non-existing 10.1.1.1: ping 10.1.1.1 PING 10.1.1.1 (10.1.1.1) 56(84) bytes of data. From 80.58.67.86 icmp_seq=20 Packet filtered From 80.58.67.86 icmp_seq=22 Packet filtered From 80.58.67.86 icmp_seq=23 Packet filtered From 80.58.67.86 icmp_seq=24 Packet filtered From 80.58.67.86 icmp_seq=25 Packet filtered What is going on here? I am posing this question mainly for learning purposes, but there is another reason: when all pings are returning "timeout", it creates an %ERRORLEVEL% value of 1, but if there is someone of "Network is not reachable" type, %ERRORLEVEL% goes to 0 (no error), and this could be inappropriate for a shell script (we can not use ping to detect, for example, if the network is down due to loss of contact with the gateway).

  Read the article

• RESOLVED Why does IPtables's NAT stop working when I enable the firewall's third interface?

  - by Kronick

  On my firewall I've three interfaces : eth0 : public IP (46.X.X.X.) eth0:0 public IP (46.X.X.Y.) eth1 : public IP (88.X.X.X.) eth2 : private LAN (172.X.X.X) I've setup a basic NAT which works great until I turn on the eth1 interface, I basically loose the connectivity. When I turn off the interface (ifconfig eth1 down) then the NAT re-work. I've added some policy routing via iproute, which makes my three public IP's available. I don't understand why turning on eth1 on makes the LAN unavailable. PS : weirder ; when I turn on eth1 BUT remove the NAT, then the firewall is accessible by using the public IPS. So to me it's exclusively a NAT issue, since without the NAT the network works while with the NAT without the second public interface, the NAT does work. Regards EDIT : I've been able to make it work by using iproute2 rules. That was definitely a routing issue. Here is what I did : ip rule add prio 50 table main ip rule add prio 201 from ip1/netmask table 201 ip rule add prio 202 from ip2/netmask table 202 ip route add default via gateway1 dev interface1 src ip1 proto static table 201 ip route append prohibit default table 201 metric 1 proto static ip route add default via gateway2 dev interface2 src ip2 proto static table 202 ip route append prohibit default table 202 metric 1 proto static # mutipath ip rule add prio 221 table 221 ip route add default table 221 proto static \ nexthop via gateway1 dev interface1 weight 2\ nexthop via gateway2 dev interface2 weight 3

  Read the article

• how to get ip address of a PPP(Point-to-Point Protocol) network interface?

  - by Xsmael

  I have a Linux machine with two network interfaces, and I'd like to get the IP address of the PPP interface w1g1 but it doesn't show up in ifconfig. There is a public IP on the PPP interface, but there is no internet connection, I'm trying to troubleshoot but I need to get the IP address of the interface and I can't. ifconfig : eth0 Link encap:Ethernet HWaddr 00:30:48:8D:F0:2C inet addr:192.168.2.254 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::230:48ff:fe8d:f02c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9970 errors:0 dropped:567 overruns:0 frame:0 TX packets:4338 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:1441024 (1.3 MiB) TX bytes:915814 (894.3 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:675 errors:0 dropped:0 overruns:0 frame:0 TX packets:675 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:50659 (49.4 KiB) TX bytes:50659 (49.4 KiB) w1g1 Link encap:Point-to-Point Protocol UP POINTOPOINT RUNNING NOARP MTU:240 Metric:1 RX packets:748994 errors:0 dropped:0 overruns:0 frame:0 TX packets:748992 errors:0 dropped:0 overruns:0 carrier:3 collisions:0 txqueuelen:100 RX bytes:179758560 (171.4 MiB) TX bytes:179758080 (171.4 MiB) Interrupt:177 Memory:f881c400-f881e3ff w1g1 is connected to a modem by an RJ45<-Serial cable and the modem is connected to the phone line. The modem is a NOKIA DNT2Mi you can see it here Routing table : 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.254 169.254.0.0/16 dev eth0 scope link default via 192.168.2.180 dev eth0

  Read the article

• Begin the Clone Wars Have!

  - by Antony Reynolds

  Creating a New Virtual Machine from an Existing Virtual Disk In previous posts I described how I set up an OEL6 machine under VirtualBox that can run an 11gR2 database and FMW 11.1.1.5.  That is great if you want the DB and FMW running in the same virtual image and it has served me well for some proof of concepts and also for some testing of different JVMs.  However I also wanted to run some testing of FMW with the database running on a separate physical machine.  So in this post I will show how to take a VirtualBox image and create a new image based on the disks from that original image. What are my Options? There is more than one way to skin a cat, or in this case to create two separate VMs that can run on different hardware.  Some of the options include: Create new virtual disk images for each new VM. Clone the existing disk images and point the new VM at the cloned images. Point the new VM at the existing snapshots. #1 is too much like hard work, install OEL twice, install a database again, install FMW again, run RCU again!  Life is too short! #2 is probably the safest way of doing things.  VirtualBox allows you to clone a disk image for use in a separate machine.  However this of course duplicates the disk and means that it is now occupying 3 times the space, once for the original disk and twice more for the two clones I would need. #3 is the most space efficient way of doing things.  It does mean however that I can only run the new “cloned” images if I have access to the original image because that is where the base snapshots reside.  However this is not a problem for me as long as I remember to keep all threee images together.  So this is the approach we will follow. Snapshot, What Snapshot? As we are going to create new virtual machines based on existing snapshots we need to figure out which snapshot to use.  We do this by opening the “Media Manager” from within VirtualBox and moving the mouse over the snapshot images until we find the snapshots we want – the snapshot name is identified in the “Attached to:” comment.  In my case I wanted the FMW installed snapshot because that had a database configured for FMW alongside the FMW software.  I made a note of the filename of that snapshot (actually I just noted the first 5 characters as that was all that was needed to uniquely identify the snapshot file). When we create the new machines we will point them at the snapshot filename we have just checked. Network or NotWork? Because we want the two new machines to communicate with each other when hosted in different physical machines we can’t use the default NAT networking mode without a lot of hassle.  But at the same time we need them to have fixed IP addresses relative to each other so that they can see each other whilst also being able to see the outside world. To achieve all these requirements I created two network adapters for each machine.  Adapter 1 was a standard NAT mapping.  This will allow each machine to get a dynamic IP address (10.0.2.15 by default) that can be used to access the external world through the VBox provided NAT gateway.  This is the same as the existing configuration. The second adapter I created as a bridged adapter.  This gives the virtual machine direct access to the host network card and by using fixed IP addresses each machine can see the other.  It is important to choose fixed IP addresses that are not routable across your internal network so you don’t get any clashes with other machines on your network.  Of course you could always get proper fixed IP addresses from your network people, but I have serveral people using my images and as long as I don’t have two instances of the same VM on the same network segment this is easier and avoids reconfiguring the network every time someone wants a copy of my VM.  If it is available I would suggest using the 10.0.3.* network as 10.0.2.* is the default NAT network.  You can check availability by pinging 10.0.3.1 and 10.0.3.2 from your host machine.  If it times out then you are probably safe to use that. Creating the New VMs Now that I had collected the data that I needed I went ahead and created the new VMs. When asked for a “Boot Hard Disk” I used the “Choose a virtual hard disk file…” link to find the snapshot I had previously selected and set that to be the existing hard disk.  I chose the previously existing SOA 11.1.1.5 install for both the new DB and FMW machines because that snapshot had the database with the RCU completed that I wanted for my DB machine and it had the SOA software installed which I wanted for my FMW machine. After the initial creation of the virtual machine go into the network setting section and enable a second adapter which will be bridged.  Make a note of the MAC addresses (the last four digits should be sufficient) of the two adapters so that you can later set the bridged adapter to use fixed IP and the NAT adapter to use DHCP. We are now ready to start the VMs and reconfigure Linux. Reconfiguring Linux Because I now have two new machines I need to change their network configuration.  In particular I need to change the hostname, update the hosts file and change the network settings. Changing the Hostname I renamed both hosts by running the hostname command as root: hostname vboxfmw.oracle.com I also edited the /etc/sysconfig file and set the correct hostname in there. HOSTNAME=vboxfmw.oracle.com Changing the Network Settings I needed to change the network configuration to give the bridged network a fixed IP address.  I first explicitly set the MAC addresses of the two adapters, because the order of the virtual adapters in the VirtualBox Manager is not necessarily the same as the order of the adapters in the guest OS.  So I went in to the System->Preferences->Network Connections screen and explicitly set the “Device MAC address” for the two adapters. Having correctly mapped the Linux adapters to the VirtualBox adapters I then set the Bridged adapter to use fixed IP addressing rather than DHCP.  There is no need for additional routing or default gateways because we expect the two machine to be on the same LAN segment. Updating the Hosts File Having renamed the machines and reconfigured the network I then updated the /etc/hosts file to refer to the new machine name add a new line to the hosts file to provide an additional IP address for my server (the new fixed IP address) add a new line for the fixed IP address of the other virtual machine 10.0.3.101      vboxdb.oracle.com       vboxdb  # Added by NetworkManager 10.0.2.15       vboxdb.oracle.com       vboxdb  # Added by NetworkManager 10.0.3.102      vboxfmw.oracle.com      vboxfmw # Added by NetworkManager 127.0.0.1       localhost.localdomain   localhost ::1     vboxdb.oracle.com       vboxdb  localhost6.localdomain6 localhost6 To make sure everything takes effect I restarted the server. Reconfiguring the Database on the DB Machine Because we changed the hostname the listener and the EM console no longer start so I need to modify the listener.ora to use the new hostname and I also need to rebuild the EM configuration because it also relies on the hostname. I edited the $ORACLE_HOME/network/admin/listener.ora and changed the listening address to the new hostname:       (ADDRESS = (PROTOCOL = TCP)(HOST = vboxdb.oracle.com)(PORT = 1521)) After changing the listener.ora I was able to start the listener using: lsnrctl start I also had to reconfigure the EM database control.  I first deconfigured it using the command: emca -deconfig dbcontrol db -repos drop This drops the repository and removes any existing registered dbcontrols. I then re-configured it using the following command: emca -config dbcontrol db -repos create This creates the EM repository and then configures and starts dbcontrol. Now my database machine is ready so I can close it down and take a snapshot. Disabling the Database on the FMW Machine I set up the database to start automatically by creating a service called “dbora”.  On the FMW machine I do not need the database running so I can prevent it auto-starting by running the following command: chkconfig –del dbora Note that because I am using a snapshot it is not a waste of disk space to have the DB installed but not used.  As long as I don’t run it, it won’t cost me anything. I can now close the FMW machine down and take a snapshot. Creating a New Domain The FMW machine is now ready to create a new domain.  When creating the domain I can point it at the second machine which is running the database.  I can potentially run these machines on two separate physical machines as long as I have the original virtual machine available to both of the physical machines. Gotchas in Snapshotting VirtualBox does not support the concept of linked machines in a network like some virtualization technologies so when creating a snapshot it is a good idea to shut both VMs down and then take a snapshot on both of them.  This is because we want to keep the database in sync with the middleware.  One way to make sure that this happens would be to place all the domain configuration files on the database server via an NFS share, this would mean that all we would need to snapshot would be the database machine because that would hold all the state and configuration. The Sky’s the Limit We have covered a simple case of having just two machines.  I have a more complicated configuration in which two machine run a RAC database off the same base OS image, and two more machines run a SOA cluster based on the same OS image.  Just remember what machine holds state and what are the consequences of taking a snapshot.

  Read the article

• Friday Tips #33

  - by Chris Kawalek

  Happy Friday, everyone! Our tip this week is from an excellent white paper written by our own Greg King titled Oracle VM 3: Building a Demo Environment using Oracle VM VirtualBox. In it, Greg gives you everything you need to know to set up Oracle VM Server inside of Oracle VM VirtualBox for testing and demoing. The section we're highlighting below is on how to configure the network interfaces of your virtual machines: VirtualBox comes with a few different types of network interfaces that can be used to allow communication between the VM guests and the host operating system, including network interfaces that will allow the VM guests to communicate with local and wide area networks accessed from your laptop or personal computer. However, for the purpose of the demonstration environment we will limit the network communication to include access just between your desktop and the virtual machines being managed by VirtualBox. The install process for Oracle VM VirtualBox creates a single host-only network device on your laptop or personal computer. Using the host-only network device will allow you to open a browser on your desktop to access the Oracle VM Manager running within the VirtualBox VM guest. The device will only allow network traffic between the VM guests and your host operating system, but nothing outside the confines of your laptop or personal computer. We will need to add a second host-only network since the Oracle VM Server appliance has both eth0 and eth1 configured. You can choose to use eth1 on the Oracle VM Servers or not use them – the choice is yours. But, at least the host side network device will exist if you decide to use it. Greg goes on to describe in detail how to setup the network interfaces, so you can head on over to the paper and get even more info. See you next week! -Chris 

  Read the article

• How to create a Semantic Network like wordnet based on Wikipedia?

  - by Forbidden Overseer

  I am an undergraduate student and I have to create a Semantic Network based on Wikipedia. This Semantic Network would be similar to Wordnet(except for it is based on Wikipedia and is concerned with "streams of text/topics" rather than simple words etc.) and I am thinking of using the Wikipedia XML dumps for the purpose. I guess I need to learn parsing an XML and "some other things" related to NLP and probably Machine Learning, but I am no way sure about anything involved herein after the XML parsing. Is the starting step: XML dump parsing into text a good idea/step? Any alternatives? What would be the steps involved after parsing XML into text to create a functional Semantic Network? What are the things/concepts I should learn in order to do them? I am not directly asking for book recommendations, but if you have read a book/article that teaches any thing related/helpful, please mention them. This may include a refernce to already existing implementations regarding the subject. Please correct me if I was wrong somewhere. Thanks!

  Read the article

• Computer Networks UNISA - Chap 14 &ndash; Insuring Integrity &amp; Availability

  - by MarkPearl

  After reading this section you should be able to Identify the characteristics of a network that keep data safe from loss or damage Protect an enterprise-wide network from viruses Explain network and system level fault tolerance techniques Discuss issues related to network backup and recovery strategies Describe the components of a useful disaster recovery plan and the options for disaster contingencies What are integrity and availability? Integrity – the soundness of a networks programs, data, services, devices, and connections Availability – How consistently and reliably a file or system can be accessed by authorized personnel A number of phenomena can compromise both integrity and availability including… security breaches natural disasters malicious intruders power flaws human error users etc Although you cannot predict every type of vulnerability, you can take measures to guard against the most damaging events. The following are some guidelines… Allow only network administrators to create or modify NOS and application system users. Monitor the network for unauthorized access or changes Record authorized system changes in a change management system’ Install redundant components Perform regular health checks on the network Check system performance, error logs, and the system log book regularly Keep backups Implement and enforce security and disaster recovery policies These are just some of the basics… Malware Malware refers to any program or piece of code designed to intrude upon or harm a system or its resources. Types of Malware… Boot sector viruses Macro viruses File infector viruses Worms Trojan Horse Network Viruses Bots Malware characteristics Some common characteristics of Malware include… Encryption Stealth Polymorphism Time dependence Malware Protection There are various tools available to protect you from malware called anti-malware software. These monitor your system for indications that a program is performing potential malware operations. A number of techniques are used to detect malware including… Signature Scanning Integrity Checking Monitoring unexpected file changes or virus like behaviours It is important to decide where anti-malware tools will be installed and find a balance between performance and protection. There are several general purpose malware policies that can be implemented to protect your network including… Every compute in an organization should be equipped with malware detection and cleaning software that regularly runs Users should not be allowed to alter or disable the anti-malware software Users should know what to do in case the anti-malware program detects a malware virus Users should be prohibited from installing any unauthorized software on their systems System wide alerts should be issued to network users notifying them if a serious malware virus has been detected. Fault Tolerance Besides guarding against malware, another key factor in maintaining the availability and integrity of data is fault tolerance. Fault tolerance is the ability for a system to continue performing despite an unexpected hardware or software malfunction. Fault tolerance can be realized in varying degrees, the optimal level of fault tolerance for a system depends on how critical its services and files are to productivity. Generally the more fault tolerant the system, the more expensive it is. The following describe some of the areas that need to be considered for fault tolerance. Environment (Temperature and humidity) Power Topology and Connectivity Servers Storage Power Typical power flaws include Surges – a brief increase in voltage due to lightening strikes, solar flares or some idiot at City Power Noise – Fluctuation in voltage levels caused by other devices on the network or electromagnetic interference Brownout – A sag in voltage for just a moment Blackout – A complete power loss The are various alternate power sources to consider including UPS’s and Generators. UPS’s are found in two categories… Standby UPS – provides continuous power when mains goes down (brief period of switching over) Online UPS – is online all the time and the device receives power from the UPS all the time (the UPS is charged continuously) Servers There are various techniques for fault tolerance with servers. Server mirroring is an option where one device or component duplicates the activities of another. It is generally an expensive process. Clustering is a fault tolerance technique that links multiple servers together to appear as a single server. They share processing and storage responsibilities and if one unit in the cluster goes down, another unit can be brought in to replace it. Storage There are various techniques available including the following… RAID Arrays NAS (Storage (Network Attached Storage) SANs (Storage Area Networks) Data Backup A backup is a copy of data or program files created for archiving or safekeeping. Many different options for backups exist with various media including… These vary in cost and speed. Optical Media Tape Backup External Disk Drives Network Backups Backup Strategy After selecting the appropriate tool for performing your servers backup, devise a backup strategy to guide you through performing reliable backups that provide maximum data protection. Questions that should be answered include… What data must be backed up At what time of day or night will the backups occur How will you verify the accuracy of the backups Where and for how long will backup media be stored Who will take responsibility for ensuring that backups occurred How long will you save backups Where will backup and recovery documentation be stored Different backup methods provide varying levels of certainty and corresponding labour cost. There are also different ways to determine which files should be backed up including… Full backup – all data on all servers is copied to storage media Incremental backup – Only data that has changed since the last full or incremental backup is copied to a storage medium Differential backup – Only data that has changed since the last backup is coped to a storage medium Disaster Recovery Disaster recovery is the process of restoring your critical functionality and data after an enterprise wide outage has occurred. A disaster recovery plan is for extreme scenarios (i.e. fire, line fault, etc). A cold site is a place were the computers, devices, and connectivity necessary to rebuild a network exist but they are not appropriately configured. A warm site is a place where the computers, devices, and connectivity necessary to rebuild a network exists with some appropriately configured devices. A hot site is a place where the computers, devices, and connectivity necessary to rebuild a network exists and all are appropriately configured.

  Read the article

• Can't get Wireless to work! (Fujitsu siemens ESPRIMO Mobile u9200) Ubuntu 12.4

  - by Martin Oscarsson

  I can't get wireless to work on my computer. I have recently installed 12.04. Computer name: (Fujitsu siemens ESPRIMO Mobile u9200) Hardware button starts bluetooth - so can't start that way. Have searched the Internet for help but can't find any on my specific problem! State: connected (global) - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath5k State: disconnected Default: no *-network beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. HERE IS ALL THE NETWORK INFO: ellika@ellikas:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:33:00:96:9a inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe00:969a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13778 errors:0 dropped:0 overruns:0 frame:0 TX packets:9510 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14022669 (14.0 MB) TX bytes:1001621 (1.0 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1542 errors:0 dropped:0 overruns:0 frame:0 TX packets:1542 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:125040 (125.0 KB) TX bytes:125040 (125.0 KB) ellika@ellikas:~$ sudo ifconfig [sudo] password for ellika: eth0 Link encap:Ethernet HWaddr 00:1e:33:00:96:9a inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe00:969a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13801 errors:0 dropped:0 overruns:0 frame:0 TX packets:9528 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14024965 (14.0 MB) TX bytes:1002836 (1.0 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1542 errors:0 dropped:0 overruns:0 frame:0 TX packets:1542 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:125040 (125.0 KB) TX bytes:125040 (125.0 KB) ellika@ellikas:~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operationen inte möjlig p.g.a. RF-kill ellika@ellikas:~$ phy0 Wireless LAN phy0: command not found ellika@ellikas:~$ rfkill Usage: rfkill [options] command Options: --version show version (0.4-1ubuntu2 (Ubuntu)) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: <idx> all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm ellika@ellikas:~$ sudo rf-kill unblock all sudo: rf-kill: kommandot hittades inte ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sedan sudo ifconfig wlan0 sedan: command not found ellika@ellikas:~$ sudo ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 00:22:5f:3f:63:76 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ellika@ellikas:~$ ^C ellika@ellikas:~$ ^C ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operationen inte möjlig p.g.a. RF-kill ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sudo rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ echo -e "sudo lshw --class network:\n\n$(sudo lshw -c network)\n\nlspci -nnn | grep Ethernet:\n\n$(lspci -nnn | grep Ethernet)\n\nlsusb:\n\n$(lsusb)\n\niwlist wlan0 scanning:\n\n$(iwlist wlan0 scanning)\n\nrfkill list:\n\n$(rfkill list)\n\nping -c 5 google.com:\n\n$(ping -c 5 google.com)\n\nhost google.com 8.8.8.8:\n\n$(host google.com 8.8.8.8)\n\nlsb_release -a:\n\n$(lsb_release -a)\n\nuname -a:\n\n$(uname -a)" ^[[C^[[C^[[C^[[C^[[C^[[B wlan0 Failed to read scan data : Network is down No LSB modules are available. sudo lshw --class network: *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 logiskt namn: eth0 version: 14 serienummer: 00:1e:33:00:96:9a storlek: 100Mbit/s kapacitet: 1Gbit/s bredd: 64 bits klocka: 33MHz förmågor: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation konfiguration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.26 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resurser: irq:44 memory:f8000000-f8003fff ioport:3000(storlek=256) memory:f2000000-f201ffff *-network INAKTIVERAD beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logiskt namn: wlan0 version: 04 serienummer: 00:22:5f:3f:63:76 bredd: 64 bits klocka: 33MHz förmågor: pm msi pciexpress msix bus_master cap_list ethernet physical wireless konfiguration: broadcast=yes driver=ath5k driverversion=3.2.0-30-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bg resurser: irq:18 memory:fa000000-fa00ffff lspci -nnn | grep Ethernet: 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 14) 06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 04) lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader Bus 001 Device 003: ID 05c8:0103 Cheng Uei Precision Industry Co., Ltd (Foxlink) FO13FF-65 PC-CAM iwlist wlan0 scanning: rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ping -c 5 google.com: PING google.com (173.194.32.34) 56(84) bytes of data. 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=1 ttl=55 time=10.6 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=2 ttl=55 time=10.5 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=3 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=4 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=5 ttl=55 time=10.4 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 10.451/10.517/10.631/0.062 ms host google.com 8.8.8.8: Using domain server: Name: 8.8.8.8 Address: 8.8.8.8#53 Aliases: google.com has address 173.194.32.36 google.com has address 173.194.32.38 google.com has address 173.194.32.41 google.com has address 173.194.32.37 google.com has address 173.194.32.35 google.com has address 173.194.32.39 google.com has address 173.194.32.33 google.com has address 173.194.32.34 google.com has address 173.194.32.46 google.com has address 173.194.32.32 google.com has address 173.194.32.40 google.com has IPv6 address 2a00:1450:400f:801::100e google.com mail is handled by 40 alt3.aspmx.l.google.com. google.com mail is handled by 20 alt1.aspmx.l.google.com. google.com mail is handled by 30 alt2.aspmx.l.google.com. google.com mail is handled by 50 alt4.aspmx.l.google.com. google.com mail is handled by 10 aspmx.l.google.com. lsb_release -a: Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise uname -a: Linux ellikas 3.2.0-30-generic-pae #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 i686 i686 i386 GNU/Linux ellika@ellikas:~$ ellika@ellikas:~$ clear ellika@ellikas:~$ echo -e "sudo lshw --class network:\n\n$(sudo lshw -c network)\n\nlspci -nnn | grep Ethernet:\n\n$(lspci -nnn | grep Ethernet)\n\nlsusb:\n\n$(lsusb)\n\niwlist wlan0 scanning:\n\n$(iwlist wlan0 scanning)\n\nrfkill list:\n\n$(rfkill list)\n\nping -c 5 google.com:\n\n$(ping -c 5 google.com)\n\nhost google.com 8.8.8.8:\n\n$(host google.com 8.8.8.8)\n\nlsb_release -a:\n\n$(lsb_release -a)\n\nuname -a:\n\n$(uname -a)" wlan0 Failed to read scan data : Network is down No LSB modules are available. sudo lshw --class network: *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 logiskt namn: eth0 version: 14 serienummer: 00:1e:33:00:96:9a storlek: 100Mbit/s kapacitet: 1Gbit/s bredd: 64 bits klocka: 33MHz förmågor: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation konfiguration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.26 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resurser: irq:44 memory:f8000000-f8003fff ioport:3000(storlek=256) memory:f2000000-f201ffff *-network INAKTIVERAD beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logiskt namn: wlan0 version: 04 serienummer: 00:22:5f:3f:63:76 bredd: 64 bits klocka: 33MHz förmågor: pm msi pciexpress msix bus_master cap_list ethernet physical wireless konfiguration: broadcast=yes driver=ath5k driverversion=3.2.0-30-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bg resurser: irq:18 memory:fa000000-fa00ffff lspci -nnn | grep Ethernet: 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 14) 06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 04) lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader Bus 001 Device 003: ID 05c8:0103 Cheng Uei Precision Industry Co., Ltd (Foxlink) FO13FF-65 PC-CAM iwlist wlan0 scanning: rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ping -c 5 google.com: PING google.com (173.194.32.34) 56(84) bytes of data. 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=1 ttl=55 time=10.6 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=2 ttl=55 time=10.5 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=3 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=4 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=5 ttl=55 time=10.5 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 10.476/10.522/10.602/0.045 ms host google.com 8.8.8.8: Using domain server: Name: 8.8.8.8 Address: 8.8.8.8#53 Aliases: google.com has address 173.194.32.36 google.com has address 173.194.32.38 google.com has address 173.194.32.41 google.com has address 173.194.32.37 google.com has address 173.194.32.35 google.com has address 173.194.32.39 google.com has address 173.194.32.33 google.com has address 173.194.32.34 google.com has address 173.194.32.46 google.com has address 173.194.32.32 google.com has address 173.194.32.40 google.com has IPv6 address 2a00:1450:400f:801::100e google.com mail is handled by 40 alt3.aspmx.l.google.com. google.com mail is handled by 20 alt1.aspmx.l.google.com. google.com mail is handled by 30 alt2.aspmx.l.google.com. google.com mail is handled by 50 alt4.aspmx.l.google.com. google.com mail is handled by 10 aspmx.l.google.com. lsb_release -a: Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise uname -a: Linux ellikas 3.2.0-30-generic-pae #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 i686 i686 i386 GNU/Linux

  Read the article

• Ops Center 12c - Update - Provisioning Solaris on x86 Using a Card-Based NIC

  - by scottdickson

  Last week, I posted a blog describing how to use Ops Center to provision Solaris over the network via a NIC on a card rather than the built-in NIC.  Really, that was all about how to install Solaris on a SPARC system.  This week, we'll look at how to do the same thing for an x86-based server. Really, the overall process is exactly the same, at least for Solaris 11, with only minor updates. We will focus on Solaris 11 for this blog.  Once I verify that the same approach works for Solaris 10, I will provide another update. Booting Solaris 11 on x86 Just as before, in order to configure the server for network boot across a card-based NIC, it is necessary to declare the asset to associate the additional MACs with the server.  You likely will need to access the server console via the ILOM to figure out the MAC and to get a good idea of the network instance number.  The simplest way to find both of these is to start a network boot using the desired NIC and see where it appears in the list of network interfaces and what MAC is used when it tries to boot.  Go to the ILOM for the server.  Reset the server and start the console.  When the BIOS loads, select the boot menu, usually with Ctrl-P.  This will give you a menu of devices to boot from, including all of the NICs.  Select the NIC you want to boot from.  Its position in the list is a good indication of what network number Solaris will give the device. In this case, we want to boot from the 5th interface (GB_4, net4).  Pick it and start the boot processes.  When it starts to boot, you will see the MAC address for the interface Once you have the network instance and the MAC, go through the same process of declaring the asset as in the SPARC case.  This associates the additional network interface with the server.. Creating an OS Provisioning Plan The simplest way to do the boot via an alternate interface on an x86 system is to do a manual boot.  Update the OS provisioning profile as in the SPARC case to reflect the fact that we are booting from a different interface.  Update, in this case, the network boot device to be GB_4/net4, or the device corresponding to your network instance number.  Configure the profile to support manual network boot by checking the box for manual boot in the OS Provisioning profile. Booting the System Once you have created a profile and plan to support booting from the additional NIC, we are ready to install the server. Again, from the ILOM, reset the system and start the console.  When the BIOS loads, select boot from the Boot Menu as above.  Select the network interface from the list as before and start the boot process.  When the grub bootloader loads, the default boot image is the Solaris Text Installer.  On the grub menu, select Automated Installer and Ops Center takes over from there. Lessons The key lesson from all of this is that Ops Center is a valuable tool for provisioning servers whether they are connected via built-in network interfaces or via high-speed NICs on cards.  This is great news for modern datacenters using converged network infrastructures.  The process works for both SPARC and x86 Solaris installations.  And it's easy and repeatable.

  Read the article

• How do I fix my ethernet card losing network connection every few minutes with kernels 3.8.x?

  - by igoryonya

  I'm using Ubuntu 13.04. My laptop is Acer Aspire one 722-c58rr, and my ethernet card works for a few seconds at a time with kernels 3.8.x, however, kernels 3.5.x and below worked fine. On kernels 3.8.x, it works fine after boot for about a minute, then it looses network connection. When pinging to some address, it says: network address is unreachable, but it can ping it's own address. The address is statically configured. Everything was working fine before. I went to vacation, where I used WiFi and 3G connections, so I didn't notice that the problem occurred. Came back home, plugged in into the ethernet. It worked for a minute then stopped. Rebooting commutator fixed the problem. Tried to connect to a different commutator, same problem. Unplugging and plugging the cable fixes the problem for another minute. Disconnecting eth in Network manager and reconnecting it again, does the same thing. WiFi has no such problem. Tried to use a different cable that works fine on another computer, the same problem. Tried to boot with the lower kernel version, the same problem was happening until I got to the version 3.5 of the kernel series. Everything works fine on the kernel 3.5.x, but I don't want to miss out on the new kernel's features. Executing commands, when booted with 3.8 kernel series, give the following results: lspci| grep -i eth: 06:00.0 Ethernet controller: Qualcomm Atheros AR8152 v2.0 Fast Ethernet (rev c1) dmesg| grep eth1: [ 89.548291] atl1c 0000:06:00.0: atl1c: eth1 NIC Link is Up How do I fix it, while staying in the new kernel version?

  Read the article

• Windows 7 laptop with two active network connections will not perform DNS AAAA lookup under certain conditions

  - by Jeff Loughridge

  My laptop has two network interfaces. The Ethernet interface connects directly to my provider's edge router. It obtains an IPv6 address via SLAAC. I manually set an IPv6 DNS server. The wireless interface connects to a CPE router that doesn't understand IPv6. If the wireless interface is disabled, I can reach the IPv6 Internet with no problems using the Ethernet interface. I run into problems when both interfaces are enabled and the wireless interface get its IPv4 DNS server via DHCP. Let's look at two scenarios. Wireless interface obtains IPv4 DNS server via DHCP - The CPE router (192.168.0.1) sends its address as the DNS server. In this scenario, Windows 7 will not perform AAAA lookups. The browser uses IPv4 transit to reach dual stack web sites. I can't reach IPv6-only web sites using domain names. I can reach IPv6-enabled web sites using IPv6 literals instead of the domain name. Wireless interface is manually configured with OpenDNS DNS server - Windows 7 performs AAAA lookups using IPv6 transit (via the Ethernet). Everything works fine. My dual homed set-up is definitely not standard. Still, the behavior is very strange to me. A valid IPv6 interface exists in my Ethernet interface. Why won't Windows attempt AAAA lookups in scenario #1? I've included the output of ipconfig /all and netstat -rn. C:\Program Files\Console>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : jake Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : res.openband.net Wireless LAN adapter Wireless Network Connection 2: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter Physical Address. . . . . . . . . : C0-CB-38-06-54-F9 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : res.openband.net Description . . . . . . . . . . . : DW1520 Wireless-N WLAN Half-Mini Card Physical Address. . . . . . . . . : C0-CB-38-06-54-F9 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::fc39:9293:7d01:4a75%13(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.105(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Wednesday, July 11, 2012 7:35:21 AM Lease Expires . . . . . . . . . . : Thursday, July 12, 2012 9:49:46 AM Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DHCPv6 IAID . . . . . . . . . . . : 364956472 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-80-F8-14-5C-26-0A-03-23-5C DNS Servers . . . . . . . . . . . : 208.67.222.222 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : res.openband.net Description . . . . . . . . . . . : Intel(R) 82577LM Gigabit Network Connection Physical Address. . . . . . . . . : 5C-26-0A-03-23-5C DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2607:2600:1:850:c0e9:211a:fd05:4e0b(Preferred) Temporary IPv6 Address. . . . . . : 2607:2600:1:850:3d29:1839:62db:c4c1(Preferred) Link-local IPv6 Address . . . . . : fe80::c0e9:211a:fd05:4e0b%12(Preferred) IPv4 Address. . . . . . . . . . . : 10.52.2.51(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.254.0 Lease Obtained. . . . . . . . . . : Monday, July 09, 2012 8:55:07 AM Lease Expires . . . . . . . . . . : Thursday, July 12, 2012 7:30:05 AM Default Gateway . . . . . . . . . : fe80::214:6aff:fe51:7f3f%12 10.52.2.1 DHCP Server . . . . . . . . . . . : 216.40.77.244 DNS Servers . . . . . . . . . . . : 2620:0:ccc::2 2620:0:ccd::2 216.40.77.126 216.40.77.244 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet1 Physical Address. . . . . . . . . : 00-50-56-C0-00-01 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::4c61:495b:229e:281e%14(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.40.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 469782614 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-80-F8-14-5C-26-0A-03-23-5C DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet8 Physical Address. . . . . . . . . : 00-50-56-C0-00-08 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::f996:61eb:8c00:45e6%15(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.17.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 486559830 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-80-F8-14-5C-26-0A-03-23-5C DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled C:\Program Files\Console>netstat -rn =========================================================================== Interface List 17...c0 cb 38 06 54 f9 ......Microsoft Virtual WiFi Miniport Adapter 13...c0 cb 38 06 54 f9 ......DW1520 Wireless-N WLAN Half-Mini Card 12...5c 26 0a 03 23 5c ......Intel(R) 82577LM Gigabit Network Connection 11...5c ac 4c f8 b8 55 ......Bluetooth Device (Personal Area Network) 14...00 50 56 c0 00 01 ......VMware Virtual Ethernet Adapter for VMnet1 15...00 50 56 c0 00 08 ......VMware Virtual Ethernet Adapter for VMnet8 1...........................Software Loopback Interface 1 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.52.2.1 10.52.2.51 10 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.105 100 10.52.2.0 255.255.254.0 On-link 10.52.2.51 261 10.52.2.51 255.255.255.255 On-link 10.52.2.51 261 10.52.3.255 255.255.255.255 On-link 10.52.2.51 261 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.0 On-link 192.168.0.105 306 192.168.0.105 255.255.255.255 On-link 192.168.0.105 306 192.168.0.255 255.255.255.255 On-link 192.168.0.105 306 192.168.17.0 255.255.255.0 On-link 192.168.17.1 276 192.168.17.1 255.255.255.255 On-link 192.168.17.1 276 192.168.17.255 255.255.255.255 On-link 192.168.17.1 276 192.168.40.0 255.255.255.0 On-link 192.168.40.1 276 192.168.40.1 255.255.255.255 On-link 192.168.40.1 276 192.168.40.255 255.255.255.255 On-link 192.168.40.1 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.52.2.51 261 224.0.0.0 240.0.0.0 On-link 192.168.0.105 306 224.0.0.0 240.0.0.0 On-link 192.168.40.1 276 224.0.0.0 240.0.0.0 On-link 192.168.17.1 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.52.2.51 261 255.255.255.255 255.255.255.255 On-link 192.168.0.105 306 255.255.255.255 255.255.255.255 On-link 192.168.40.1 276 255.255.255.255 255.255.255.255 On-link 192.168.17.1 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 12 261 ::/0 fe80::214:6aff:fe51:7f3f 1 306 ::1/128 On-link 12 13 2607:2600:1:850::/64 On-link 12 261 2607:2600:1:850:3d29:1839:62db:c4c1/128 On-link 12 261 2607:2600:1:850:c0e9:211a:fd05:4e0b/128 On-link 12 261 fe80::/64 On-link 13 281 fe80::/64 On-link 14 276 fe80::/64 On-link 15 276 fe80::/64 On-link 14 276 fe80::4c61:495b:229e:281e/128 On-link 12 261 fe80::c0e9:211a:fd05:4e0b/128 On-link 15 276 fe80::f996:61eb:8c00:45e6/128 On-link 13 281 fe80::fc39:9293:7d01:4a75/128 On-link 1 306 ff00::/8 On-link 12 261 ff00::/8 On-link 13 281 ff00::/8 On-link 14 276 ff00::/8 On-link 15 276 ff00::/8 On-link =========================================================================== Persistent Routes: None

  Read the article

• UBUNTU's Network Connection Manger can't detect Huawei ETS2051 Modem device!

  - by Doctoa

  I have a modem device called Huawei ETS2051 and the Network Connection Manger can't detect it, but when I use Gnome-PPP it work fine but the problem is when I use Gnome-PPP; apps like Ubuntu software Center Can't reconice that's Iam connecting to the Internet so the app is just act like it's offline while other apps like web browsers and IM's work good under Gnome-PPP. any way what I want is to have a Full Ubuntu experince by making The Network Connection Manger detect my ETS2051. I have another 3G USB modem and The Network Connection Manger detect it and it's work just fine but the internet price for this one is high and I can't effort it so am count on that ETS2051 modem as you can see for it's low price and stable internet speed that satesfy my needs. More information: Gnome-PPP is a GUI for wvdial. the ETS2051 modem use a serial USB port. I have a Windows driver CD for the device. I have also find This qustion about the software Center acting like it's offline around wvdial and there's this launchpad bug. and am really insest to use Ubuntu Software Center so please no other software manger apps recomendation... I've also this Genius ColorPage HR6X Slim scanner that's Ubuntu can't detect it, so if you interset you can check and answer the qustion from here...

  Read the article

• Why am I getting [mount error(22): Invalid argument] while trying to mount SMB network drive?

  - by Steve_

  Disclaimer: I am very new to Linux :) Anyway, onward: I have a fresh instance of Ubuntu Server (12.04.1 LTS) running on my network and I want to mount a network drive to the server so I can access the contents. The network drive is a SAMBA compatible drive running Darwin OS. If I run the following command: smbclient -L //192.168.0.2 -U myuser It prompts me for the password and then displays output similar to: Domain=[SERVER01] OS=[Darwin] Server=[@(#)PROGRAM:smbd PROJECT:smbx-105.4.0] Sharename Type Comment --------- ---- ------- Comp Staff's Public Folder Disk CompRaid03 Disk Dropbox Disk Groups Disk IPC$ IPC Public Disk Users Disk compstaff Disk However, when I try and mount the CompRaid03 share, using this command: sudo mount -t cifs //192.168.0.2/CompRaid03 /mnt/myshare -o username=myuser I get the same password prompt, but after putting the correct password in, I received this error: mount error(22): Invalid argument dmesg | tail returns: [23576.037373] CIFS VFS: cifs_mount failed w/return code = -22 I don't understand what is wrong with this command. I've managed to mount a share on my current (Windows 8) machine using basically the same command but with a different IP address and share name (obviously). I've spent a good few hours trying to solve this and got no where. Any help or pointers would be greatly appreciated. Thanks Steve EDIT As suggested I've also trued using "user=" instead of "username=": sudo mount -t cifs //192.168.0.2/CompRaid03 /mnt/svnrepo -o user=myuser This results in the same "Invalid argument" error.

  Read the article

• Break a class in twain, or impose an interface for restricted access?

  - by bedwyr

  What's the best way of partitioning a class when its functionality needs to be externally accessed in different ways by different classes? Hopefully the following example will make the question clear :) I have a Java class which accesses a single location in a directory allowing external classes to perform read/write operations to it. Read operations return usage stats on the directory (e.g. available disk space, number of writes, etc.); write operations, obviously, allow external classes to write data to the disk. These methods always work on the same location, and receive their configuration (e.g. which directory to use, min disk space, etc.) from an external source (passed to the constructor). This class looks something like this: public class DiskHandler { public DiskHandler(String dir, int minSpace) { ... } public void writeToDisk(String contents, String filename) { int space = getAvailableSpace(); ... } public void getAvailableSpace() { ... } } There's quite a bit more going on, but this will do to suffice. This class needs to be accessed differently by two external classes. One class needs access to the read operations; the other needs access to both read and write operations. public class DiskWriter { DiskHandler diskHandler; public DiskWriter() { diskHandler = new DiskHandler(...); } public void doSomething() { diskHandler.writeToDisk(...); } } public class DiskReader { DiskHandler diskHandler; public DiskReader() { diskHandler = new DiskHandler(...); } public void doSomething() { int space = diskHandler.getAvailableSpace(...); } } At this point, both classes share the same class, but the class which should only read has access to the write methods. Solution 1 I could break this class into two. One class would handle read operations, and the other would handle writes: // NEW "UTILITY" CLASSES public class WriterUtil { private ReaderUtil diskReader; public WriterUtil(String dir, int minSpace) { ... diskReader = new ReaderUtil(dir, minSpace); } public void writeToDisk(String contents, String filename) { int = diskReader.getAvailableSpace(); ... } } public class ReaderUtil { public ReaderUtil(String dir, int minSpace) { ... } public void getAvailableSpace() { ... } } // MODIFIED EXTERNALLY-ACCESSING CLASSES public class DiskWriter { WriterUtil diskWriter; public DiskWriter() { diskWriter = new WriterUtil(...); } public void doSomething() { diskWriter.writeToDisk(...); } } public class DiskReader { ReaderUtil diskReader; public DiskReader() { diskReader = new ReaderUtil(...); } public void doSomething() { int space = diskReader.getAvailableSpace(...); } } This solution prevents classes from having access to methods they should not, but it also breaks encapsulation. The original DiskHandler class was completely self-contained and only needed config parameters via a single constructor. By breaking apart the functionality into read/write classes, they both are concerned with the directory and both need to be instantiated with their respective values. In essence, I don't really care to duplicate the concerns. Solution 2 I could implement an interface which only provisions read operations, and use this when a class only needs access to those methods. The interface might look something like this: public interface Readable { int getAvailableSpace(); } The Reader class would instantiate the object like this: Readable diskReader; public DiskReader() { diskReader = new DiskHandler(...); } This solution seems brittle, and prone to confusion in the future. It doesn't guarantee developers will use the correct interface in the future. Any changes to the implementation of the DiskHandler could also need to update the interface as well as the accessing classes. I like it better than the previous solution, but not by much. Frankly, neither of these solutions seems perfect, but I'm not sure if one should be preferred over the other. I really don't want to break the original class up, but I also don't know if the interface buys me much in the long run. Are there other solutions I'm missing?

  Read the article

• What is the best Broadphase Interface for moving spheres?

  - by Molmasepic

  As of now I am working on optimizing the performance of the physics and collision, and as of now I am having some slowdowns on my other computers from my main. I have well over 3000 btSphereShape Rigidbodies and 2/3 of them do not move at all, but I am noticing(by the profile below) that collision is taking a bit of time to maneuver. Each sample counts as 0.01 seconds. % cumulative self self total time seconds seconds calls ms/call ms/call name 10.09 0.65 0.65 SphereTriangleDetector::collide(btVector3 const&, btVector3&, btVector3&, float&, float&, float) 7.61 1.14 0.49 btSphereTriangleCollisionAlgorithm::processCollision(btCollisionObject*, btCollisionObject*, btDispatcherInfo const&, btManifoldResult*) 5.59 1.50 0.36 btConvexTriangleCallback::processTriangle(btVector3*, int, int) 5.43 1.85 0.35 btQuantizedBvh::reportAabbOverlappingNodex(btNodeOverlapCallback*, btVector3 const&, btVector3 const&) const 4.97 2.17 0.32 btBvhTriangleMeshShape::processAllTriangles(btTriangleCallback*, btVector3 const&, btVector3 const&) const::MyNodeOverlapCallback::processNode(int, int) 4.19 2.44 0.27 btSequentialImpulseConstraintSolver::resolveSingleConstraintRowGeneric(btRigidBody&, btRigidBody&, btSolverConstraint const&) 4.04 2.70 0.26 btSequentialImpulseConstraintSolver::resolveSingleConstraintRowLowerLimit(btRigidBody&, btRigidBody&, btSolverConstraint const&) 3.73 2.94 0.24 Ogre::OctreeSceneManager::walkOctree(Ogre::OctreeCamera*, Ogre::RenderQueue*, Ogre::Octree*, Ogre::VisibleObjectsBoundsInfo*, bool, bool) 3.42 3.16 0.22 btTriangleShape::getVertex(int, btVector3&) const 2.48 3.32 0.16 Ogre::Frustum::isVisible(Ogre::AxisAlignedBox const&, Ogre::FrustumPlane*) const 2.33 3.47 0.15 1246357 0.00 0.00 Gorilla::Layer::setVisible(bool) 2.33 3.62 0.15 SphereTriangleDetector::getClosestPoints(btDiscreteCollisionDetectorInterface::ClosestPointInput const&, btDiscreteCollisionDetectorInterface::Result&, btIDebugDraw*, bool) 1.86 3.74 0.12 btCollisionDispatcher::findAlgorithm(btCollisionObject*, btCollisionObject*, btPersistentManifold*) 1.86 3.86 0.12 btSequentialImpulseConstraintSolver::setupContactConstraint(btSolverConstraint&, btCollisionObject*, btCollisionObject*, btManifoldPoint&, btContactSolverInfo const&, btVector3&, float&, float&, btVector3&, btVector3&) 1.71 3.97 0.11 btTriangleShape::getEdge(int, btVector3&, btVector3&) const 1.55 4.07 0.10 _Unwind_SjLj_Register 1.55 4.17 0.10 _Unwind_SjLj_Unregister 1.55 4.27 0.10 Ogre::D3D9HardwareVertexBuffer::updateBufferResources(char const*, Ogre::D3D9HardwareVertexBuffer::BufferResources*) 1.40 4.36 0.09 btManifoldResult::addContactPoint(btVector3 const&, btVector3 const&, float) 1.40 4.45 0.09 btSequentialImpulseConstraintSolver::setupFrictionConstraint(btSolverConstraint&, btVector3 const&, btRigidBody*, btRigidBody*, btManifoldPoint&, btVector3 const&, btVector3 const&, btCollisionObject*, btCollisionObject*, float, float, float) 1.24 4.53 0.08 btSequentialImpulseConstraintSolver::convertContact(btPersistentManifold*, btContactSolverInfo const&) 1.09 4.60 0.07 408760 0.00 0.00 Living::MapHide() 1.09 4.67 0.07 btSphereTriangleCollisionAlgorithm::~btSphereTriangleCollisionAlgorithm() 1.09 4.74 0.07 inflate_fast EDIT: Updated to show current Profile. I have only listed the functions using over 1% time from the many functions that are being used. Another thing is that each monster has a certain area that they stay in and are only active when a player is in said area. I was wondering if maybe there is a way to deactivate the non-active monsters from bullet(reactivating once in the area again) or maybe theres a different broadphase interface that I should use. The current BPI is btDbvtBroadphase. EDIT: Here is the Profile on the other computer(the top one is my main) Each sample counts as 0.01 seconds. % cumulative self self total time seconds seconds calls ms/call ms/call name 12.18 1.19 1.19 SphereTriangleDetector::collide(btVector3 const&, btVector3&, btVector3&, float&, float&, float) 6.76 1.85 0.66 btSphereTriangleCollisionAlgorithm::processCollision(btCollisionObject*, btCollisionObject*, btDispatcherInfo const&, btManifoldResult*) 5.83 2.42 0.57 btQuantizedBvh::reportAabbOverlappingNodex(btNodeOverlapCallback*, btVector3 const&, btVector3 const&) const 5.12 2.92 0.50 btConvexTriangleCallback::processTriangle(btVector3*, int, int) 4.61 3.37 0.45 btTriangleShape::getVertex(int, btVector3&) const 4.09 3.77 0.40 _Unwind_SjLj_Register 3.48 4.11 0.34 btBvhTriangleMeshShape::processAllTriangles(btTriangleCallback*, btVector3 const&, btVector3 const&) const::MyNodeOverlapCallback::processNode(int, int) 2.46 4.35 0.24 btSequentialImpulseConstraintSolver::resolveSingleConstraintRowLowerLimit(btRigidBody&, btRigidBody&, btSolverConstraint const&) 2.15 4.56 0.21 _Unwind_SjLj_Unregister 2.15 4.77 0.21 SphereTriangleDetector::getClosestPoints(btDiscreteCollisionDetectorInterface::ClosestPointInput const&, btDiscreteCollisionDetectorInterface::Result&, btIDebugDraw*, bool) 1.84 4.95 0.18 btTriangleShape::getEdge(int, btVector3&, btVector3&) const 1.64 5.11 0.16 btSequentialImpulseConstraintSolver::resolveSingleConstraintRowGeneric(btRigidBody&, btRigidBody&, btSolverConstraint const&) 1.54 5.26 0.15 btSequentialImpulseConstraintSolver::setupContactConstraint(btSolverConstraint&, btCollisionObject*, btCollisionObject*, btManifoldPoint&, btContactSolverInfo const&, btVector3&, float&, float&, btVector3&, btVector3&) 1.43 5.40 0.14 Ogre::D3D9HardwareVertexBuffer::updateBufferResources(char const*, Ogre::D3D9HardwareVertexBuffer::BufferResources*) 1.33 5.53 0.13 btManifoldResult::addContactPoint(btVector3 const&, btVector3 const&, float) 1.13 5.64 0.11 btRigidBody::predictIntegratedTransform(float, btTransform&) 1.13 5.75 0.11 btTriangleIndexVertexArray::getLockedReadOnlyVertexIndexBase(unsigned char const**, int&, PHY_ScalarType&, int&, unsigned char const**, int&, int&, PHY_ScalarType&, int) const 1.02 5.85 0.10 btSphereTriangleCollisionAlgorithm::CreateFunc::CreateCollisionAlgorithm(btCollisionAlgorithmConstructionInfo&, btCollisionObject*, btCollisionObject*) 1.02 5.95 0.10 btSphereTriangleCollisionAlgorithm::btSphereTriangleCollisionAlgorithm(btPersistentManifold*, btCollisionAlgorithmConstructionInfo const&, btCollisionObject*, btCollisionObject*, bool) Edited same as other Profile.

  Read the article

< Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >